Skip to contentSkip to conversation

rebased refactor of intel_display

RFC New Dave Airlie 3 participants 14 messages Jan 14, 2021

Subsystems (3)
lore
Share & tools
lore
author maintainer
#1 lore raw

PATCH 1/11 drm/i915: refactor some crtc code out of intel display. (v2)

From: Dave Airlie <[email protected]>

There may be more crtc code that can be pulled out, but this is a good start.

v2: move plane before this.

[Jani: cleaned up intel_crtc.h a bit.]
---
 drivers/gpu/drm/i915/Makefile                |   1 +
 drivers/gpu/drm/i915/display/intel_crtc.c    | 325 +++++++++++++++++++
 drivers/gpu/drm/i915/display/intel_crtc.h    |  22 ++
 drivers/gpu/drm/i915/display/intel_display.c | 305 +----------------
 4 files changed, 349 insertions(+), 304 deletions(-)
 create mode 100644 drivers/gpu/drm/i915/display/intel_crtc.c
 create mode 100644 drivers/gpu/drm/i915/display/intel_crtc.h
drivers/gpu/drm/i915/Makefile +1 -0
index eb0d710cff8c..c0edb610ca97 100644
@@ -196,6 +196,7 @@ i915-y += \
 	display/intel_color.o \
 	display/intel_combo_phy.o \
 	display/intel_connector.o \
+	display/intel_crtc.o \
 	display/intel_csr.o \
 	display/intel_cursor.o \
 	display/intel_display.o \
drivers/gpu/drm/i915/display/intel_crtc.c new file +325 -0

325 lines not on this page · raw message

drivers/gpu/drm/i915/display/intel_crtc.h new file +22 -0
new file mode 100644
index 000000000000..08112d557411
@@ -0,0 +1,22 @@
+/* SPDX-License-Identifier: MIT */
+/*
+ * Copyright © 2020 Intel Corporation
+ */
+
+#ifndef _INTEL_CRTC_H_
+#define _INTEL_CRTC_H_
+
+#include <linux/types.h>
+
+enum pipe;
+struct drm_i915_private;
+struct intel_crtc;
+struct intel_crtc_state;
+
+u32 intel_crtc_max_vblank_count(const struct intel_crtc_state *crtc_state);
+int intel_crtc_init(struct drm_i915_private *dev_priv, enum pipe pipe);
+struct intel_crtc_state *intel_crtc_state_alloc(struct intel_crtc *crtc);
+void intel_crtc_state_reset(struct intel_crtc_state *crtc_state,
+			    struct intel_crtc *crtc);
+
+#endif
drivers/gpu/drm/i915/display/intel_display.c +1 -304

360 lines not on this page · raw message

Signature · 6 lines
2.27.0

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
author maintainer
#2 lore raw

PATCH 2/11 drm/i915: refactor pll code out into intel_dpll.c

In reply to Dave Airlie

From: Dave Airlie <[email protected]>

This pulls a large chunk of the pll calculation code out of intel_display.c to a new file.

One function makes sense to be an inline, otherwise this is pretty much a straight copy cover. Also all the remaining hooks for g45 and older end up the same now.

[Jani: cleaned up intel_dpll.h a bit, de-duped intel_panel_use_ssc().]
---
 drivers/gpu/drm/i915/Makefile                 |    1 +
 drivers/gpu/drm/i915/display/intel_display.c  | 1402 +----------------
 drivers/gpu/drm/i915/display/intel_display.h  |    3 +
 .../drm/i915/display/intel_display_types.h    |   13 +
 drivers/gpu/drm/i915/display/intel_dpll.c     | 1363 ++++++++++++++++
 drivers/gpu/drm/i915/display/intel_dpll.h     |   23 +
 6 files changed, 1414 insertions(+), 1391 deletions(-)
 create mode 100644 drivers/gpu/drm/i915/display/intel_dpll.c
 create mode 100644 drivers/gpu/drm/i915/display/intel_dpll.h
drivers/gpu/drm/i915/Makefile +1 -0
index c0edb610ca97..0483d2ccf71b 100644
@@ -202,6 +202,7 @@ i915-y += \
 	display/intel_display.o \
 	display/intel_display_power.o \
 	display/intel_dpio_phy.o \
+	display/intel_dpll.o \
 	display/intel_dpll_mgr.o \
 	display/intel_dsb.o \
 	display/intel_fbc.o \
drivers/gpu/drm/i915/display/intel_display.c +11 -1391

1,500 lines not on this page · raw message

drivers/gpu/drm/i915/display/intel_display.h +3 -0
index 7ddbc00a0f41..604a183fef7d 100644
@@ -651,6 +651,9 @@ u32 intel_plane_compute_aligned_offset(int *x, int *y,
 				       int color_plane);
 int intel_plane_pin_fb(struct intel_plane_state *plane_state);
 void intel_plane_unpin_fb(struct intel_plane_state *old_plane_state);
+struct intel_encoder *
+intel_get_crtc_new_encoder(const struct intel_atomic_state *state,
+			   const struct intel_crtc_state *crtc_state);
 
 /* modesetting */
 void intel_modeset_init_hw(struct drm_i915_private *i915);
drivers/gpu/drm/i915/display/intel_display_types.h +13 -0
index 24792102bcf6..8e145f9a32e5 100644
@@ -1839,4 +1839,17 @@ to_intel_frontbuffer(struct drm_framebuffer *fb)
 	return fb ? to_intel_framebuffer(fb)->frontbuffer : NULL;
 }
 
+static inline bool intel_panel_use_ssc(struct drm_i915_private *dev_priv)
+{
+	if (dev_priv->params.panel_use_ssc >= 0)
+		return dev_priv->params.panel_use_ssc != 0;
+	return dev_priv->vbt.lvds_use_ssc
+		&& !(dev_priv->quirks & QUIRK_LVDS_SSC_DISABLE);
+}
+
+static inline u32 i9xx_dpll_compute_fp(struct dpll *dpll)
+{
+	return dpll->n << 16 | dpll->m1 << 8 | dpll->m2;
+}
+
 #endif /*  __INTEL_DISPLAY_TYPES_H__ */
drivers/gpu/drm/i915/display/intel_dpll.c new file +1363 -0

1,363 lines not on this page · raw message

drivers/gpu/drm/i915/display/intel_dpll.h new file +23 -0
new file mode 100644
index 000000000000..caf4615092e1
@@ -0,0 +1,23 @@
+/* SPDX-License-Identifier: MIT */
+/*
+ * Copyright © 2020 Intel Corporation
+ */
+
+#ifndef _INTEL_DPLL_H_
+#define _INTEL_DPLL_H_
+
+struct dpll;
+struct drm_i915_private;
+struct intel_crtc;
+struct intel_crtc_state;
+
+void intel_dpll_init_clock_hook(struct drm_i915_private *dev_priv);
+int vlv_calc_dpll_params(int refclk, struct dpll *clock);
+int pnv_calc_dpll_params(int refclk, struct dpll *clock);
+int i9xx_calc_dpll_params(int refclk, struct dpll *clock);
+void vlv_compute_dpll(struct intel_crtc *crtc,
+		      struct intel_crtc_state *pipe_config);
+void chv_compute_dpll(struct intel_crtc *crtc,
+		      struct intel_crtc_state *pipe_config);
+
+#endif
Signature · 6 lines
2.27.0

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
author maintainer
#3 lore raw

PATCH 3/11 drm/i915: split fdi code out from intel_display.c

In reply to Dave Airlie

From: Dave Airlie <[email protected]>

This just refactors out the fdi code to a separate file.

[Jani: cleaned up intel_fdi.h a bit.]
---
 drivers/gpu/drm/i915/Makefile                 |   1 +
 drivers/gpu/drm/i915/display/intel_display.c  | 685 +-----------------
 .../drm/i915/display/intel_display_types.h    |   9 +
 drivers/gpu/drm/i915/display/intel_fdi.c      | 683 +++++++++++++++++
 drivers/gpu/drm/i915/display/intel_fdi.h      |  22 +
 5 files changed, 718 insertions(+), 682 deletions(-)
 create mode 100644 drivers/gpu/drm/i915/display/intel_fdi.c
 create mode 100644 drivers/gpu/drm/i915/display/intel_fdi.h
drivers/gpu/drm/i915/Makefile +1 -0
index 0483d2ccf71b..32a041609df6 100644
@@ -206,6 +206,7 @@ i915-y += \
 	display/intel_dpll_mgr.o \
 	display/intel_dsb.o \
 	display/intel_fbc.o \
+	display/intel_fdi.o \
 	display/intel_fifo_underrun.o \
 	display/intel_frontbuffer.o \
 	display/intel_global_state.o \
drivers/gpu/drm/i915/display/intel_display.c +3 -682

721 lines not on this page · raw message

drivers/gpu/drm/i915/display/intel_display_types.h +9 -0
index 8e145f9a32e5..f951a09d6b12 100644
@@ -1852,4 +1852,13 @@ static inline u32 i9xx_dpll_compute_fp(struct dpll *dpll)
 	return dpll->n << 16 | dpll->m1 << 8 | dpll->m2;
 }
 
+static inline u32 intel_fdi_link_freq(struct drm_i915_private *dev_priv,
+				      const struct intel_crtc_state *pipe_config)
+{
+	if (HAS_DDI(dev_priv))
+		return pipe_config->port_clock; /* SPLL */
+	else
+		return dev_priv->fdi_pll_freq;
+}
+
 #endif /*  __INTEL_DISPLAY_TYPES_H__ */
drivers/gpu/drm/i915/display/intel_fdi.c new file +683 -0

683 lines not on this page · raw message

drivers/gpu/drm/i915/display/intel_fdi.h new file +22 -0
new file mode 100644
index 000000000000..a9cd21663eb8
@@ -0,0 +1,22 @@
+/* SPDX-License-Identifier: MIT */
+/*
+ * Copyright © 2020 Intel Corporation
+ */
+
+#ifndef _INTEL_FDI_H_
+#define _INTEL_FDI_H_
+
+struct drm_i915_private;
+struct intel_crtc;
+struct intel_crtc_state;
+
+#define I915_DISPLAY_CONFIG_RETRY 1
+int ilk_fdi_compute_config(struct intel_crtc *intel_crtc,
+			   struct intel_crtc_state *pipe_config);
+void intel_fdi_normal_train(struct intel_crtc *crtc);
+void ilk_fdi_disable(struct intel_crtc *crtc);
+void ilk_fdi_pll_disable(struct intel_crtc *intel_crtc);
+void ilk_fdi_pll_enable(const struct intel_crtc_state *crtc_state);
+void intel_fdi_init_hook(struct drm_i915_private *dev_priv);
+
+#endif
Signature · 6 lines
2.27.0

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
author maintainer
#4 lore raw

PATCH 4/11 drm/i915: refactor ddi translations into a separate file

In reply to Dave Airlie

From: Dave Airlie <[email protected]>

Ville suggested this, these tables are probably better being standalone.

This fixes up the cnl/bxt interfaces to be like the others, the intel one I left alone since it has a few extra entrypoints.

---
 drivers/gpu/drm/i915/Makefile                 |    1 +
 drivers/gpu/drm/i915/display/intel_ddi.c      | 1417 +----------------
 .../drm/i915/display/intel_ddi_buf_trans.c    | 1358 ++++++++++++++++
 .../drm/i915/display/intel_ddi_buf_trans.h    |   99 ++
 4 files changed, 1470 insertions(+), 1405 deletions(-)
 create mode 100644 drivers/gpu/drm/i915/display/intel_ddi_buf_trans.c
 create mode 100644 drivers/gpu/drm/i915/display/intel_ddi_buf_trans.h
drivers/gpu/drm/i915/Makefile +1 -0
index 32a041609df6..e34e1b6006ce 100644
@@ -237,6 +237,7 @@ i915-y += \
 	display/icl_dsi.o \
 	display/intel_crt.o \
 	display/intel_ddi.o \
+	display/intel_ddi_buf_trans.o \
 	display/intel_dp.o \
 	display/intel_dp_aux_backlight.o \
 	display/intel_dp_hdcp.o \
drivers/gpu/drm/i915/display/intel_ddi.c +12 -1405

1,479 lines not on this page · raw message

drivers/gpu/drm/i915/display/intel_ddi_buf_trans.c new file +1358 -0

1,358 lines not on this page · raw message

drivers/gpu/drm/i915/display/intel_ddi_buf_trans.h new file +99 -0

99 lines not on this page · raw message

Signature · 6 lines
2.27.0

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
author maintainer
#5 lore raw

PATCH 5/11 drm/i915: migrate hsw fdi code to new file.

In reply to Dave Airlie

From: Dave Airlie <[email protected]>

Daniel asked for this, but it's a bit messy and I'm not sure how best to clean it up yet.

[Jani: also moved fdi buf trans to intel_fdi.c.]
---
 drivers/gpu/drm/i915/display/intel_crt.c |   1 +
 drivers/gpu/drm/i915/display/intel_ddi.c | 151 ++---------------------
 drivers/gpu/drm/i915/display/intel_ddi.h |   8 +-
 drivers/gpu/drm/i915/display/intel_fdi.c | 139 +++++++++++++++++++++
 drivers/gpu/drm/i915/display/intel_fdi.h |   3 +
 5 files changed, 156 insertions(+), 146 deletions(-)
drivers/gpu/drm/i915/display/intel_crt.c +1 -0
index 4934edd51cb0..077ebc7e6396 100644
@@ -38,6 +38,7 @@
 #include "intel_crt.h"
 #include "intel_ddi.h"
 #include "intel_display_types.h"
+#include "intel_fdi.h"
 #include "intel_fifo_underrun.h"
 #include "intel_gmbus.h"
 #include "intel_hotplug.h"
drivers/gpu/drm/i915/display/intel_ddi.c +7 -144

184 lines not on this page · raw message

drivers/gpu/drm/i915/display/intel_ddi.h +6 -2
index a4dd815c0000..f9a916cad7e7 100644
@@ -17,6 +17,7 @@ struct intel_crtc_state;
 struct intel_dp;
 struct intel_dpll_hw_state;
 struct intel_encoder;
+struct intel_shared_dpll;
 enum transcoder;
 
 i915_reg_t dp_tp_ctl_reg(struct intel_encoder *encoder,
@@ -27,8 +28,11 @@ void intel_ddi_fdi_post_disable(struct intel_atomic_state *state,
 				struct intel_encoder *intel_encoder,
 				const struct intel_crtc_state *old_crtc_state,
 				const struct drm_connector_state *old_conn_state);
-void hsw_fdi_link_train(struct intel_encoder *encoder,
-			const struct intel_crtc_state *crtc_state);
+u32 hsw_pll_to_ddi_pll_sel(const struct intel_shared_dpll *pll);
+void intel_prepare_dp_ddi_buffers(struct intel_encoder *encoder,
+				  const struct intel_crtc_state *crtc_state);
+void intel_wait_ddi_buf_idle(struct drm_i915_private *dev_priv,
+			     enum port port);
 void intel_ddi_init(struct drm_i915_private *dev_priv, enum port port);
 bool intel_ddi_get_hw_state(struct intel_encoder *encoder, enum pipe *pipe);
 void intel_ddi_enable_transcoder_func(struct intel_encoder *encoder,
drivers/gpu/drm/i915/display/intel_fdi.c +139 -0

151 lines not on this page · raw message

drivers/gpu/drm/i915/display/intel_fdi.h +3 -0
index a9cd21663eb8..af01d2c173a8 100644
@@ -9,6 +9,7 @@
 struct drm_i915_private;
 struct intel_crtc;
 struct intel_crtc_state;
+struct intel_encoder;
 
 #define I915_DISPLAY_CONFIG_RETRY 1
 int ilk_fdi_compute_config(struct intel_crtc *intel_crtc,
@@ -18,5 +19,7 @@ void ilk_fdi_disable(struct intel_crtc *crtc);
 void ilk_fdi_pll_disable(struct intel_crtc *intel_crtc);
 void ilk_fdi_pll_enable(const struct intel_crtc_state *crtc_state);
 void intel_fdi_init_hook(struct drm_i915_private *dev_priv);
+void hsw_fdi_link_train(struct intel_encoder *encoder,
+			const struct intel_crtc_state *crtc_state);
 
 #endif
Signature · 6 lines
2.27.0

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
author maintainer
#6 lore raw

PATCH 6/11 drm/i915: migrate skl planes code new file (v3)

In reply to Dave Airlie

From: Dave Airlie <[email protected]>

Rework the plane init calls to do the gen test one level higher.

Rework some of the plane helpers so they can live in new file, there is still some scope to clean up the plane/fb interactions later.

v2: drop atomic code back, rename file to Ville suggestions, add header file.
v3: move scaler bits back

---
 drivers/gpu/drm/i915/Makefile                 |    3 +-
 drivers/gpu/drm/i915/display/i9xx_plane.c     |    4 -
 drivers/gpu/drm/i915/display/icl_dsi.c        |    1 +
 drivers/gpu/drm/i915/display/intel_crtc.c     |   13 +-
 drivers/gpu/drm/i915/display/intel_ddi.c      |    1 +
 drivers/gpu/drm/i915/display/intel_display.c  |  956 +------
 drivers/gpu/drm/i915/display/intel_display.h  |   27 +-
 .../drm/i915/display/intel_display_types.h    |   21 +
 drivers/gpu/drm/i915/display/intel_dp_mst.c   |    1 +
 drivers/gpu/drm/i915/display/intel_psr.c      |    1 +
 drivers/gpu/drm/i915/display/intel_sprite.c   | 1343 +---------
 drivers/gpu/drm/i915/display/intel_sprite.h   |    6 +-
 .../drm/i915/display/skl_universal_plane.c    | 2263 +++++++++++++++++
 .../drm/i915/display/skl_universal_plane.h    |   32 +
 drivers/gpu/drm/i915/display/vlv_dsi.c        |    1 +
 drivers/gpu/drm/i915/intel_pm.c               |    1 +
 16 files changed, 2382 insertions(+), 2292 deletions(-)
 create mode 100644 drivers/gpu/drm/i915/display/skl_universal_plane.c
 create mode 100644 drivers/gpu/drm/i915/display/skl_universal_plane.h
drivers/gpu/drm/i915/Makefile +2 -1
index e34e1b6006ce..4f2c26bdc8b9 100644
@@ -219,7 +219,8 @@ i915-y += \
 	display/intel_sprite.o \
 	display/intel_tc.o \
 	display/intel_vga.o \
-	display/i9xx_plane.o
+	display/i9xx_plane.o \
+	display/skl_universal_plane.o
 i915-$(CONFIG_ACPI) += \
 	display/intel_acpi.o \
 	display/intel_opregion.o
drivers/gpu/drm/i915/display/i9xx_plane.c +0 -4
index b78985c855a5..6c568079f492 100644
@@ -578,10 +578,6 @@ intel_primary_plane_create(struct drm_i915_private *dev_priv, enum pipe pipe)
 	int num_formats;
 	int ret, zpos;
 
-	if (INTEL_GEN(dev_priv) >= 9)
-		return skl_universal_plane_create(dev_priv, pipe,
-						  PLANE_PRIMARY);
-
 	plane = intel_plane_alloc();
 	if (IS_ERR(plane))
 		return plane;
drivers/gpu/drm/i915/display/icl_dsi.c +1 -0
index 9d245a689323..9eeec6fadec7 100644
@@ -35,6 +35,7 @@
 #include "intel_dsi.h"
 #include "intel_panel.h"
 #include "intel_vdsc.h"
+#include "skl_universal_plane.h"
 
 static int header_credits_available(struct drm_i915_private *dev_priv,
 				    enum transcoder dsi_trans)
drivers/gpu/drm/i915/display/intel_crtc.c +11 -2
index 57b0a3ebe908..eb478712c381 100644
@@ -20,6 +20,7 @@
 #include "intel_pipe_crc.h"
 #include "intel_sprite.h"
 #include "i9xx_plane.h"
+#include "skl_universal_plane.h"
 
 static void assert_vblank_disabled(struct drm_crtc *crtc)
 {
@@ -243,7 +244,11 @@ int intel_crtc_init(struct drm_i915_private *dev_priv, enum pipe pipe)
 	crtc->pipe = pipe;
 	crtc->num_scalers = RUNTIME_INFO(dev_priv)->num_scalers[pipe];
 
-	primary = intel_primary_plane_create(dev_priv, pipe);
+	if (INTEL_GEN(dev_priv) >= 9)
+		primary = skl_universal_plane_create(dev_priv, pipe,
+						     PLANE_PRIMARY);
+	else
+		primary = intel_primary_plane_create(dev_priv, pipe);
 	if (IS_ERR(primary)) {
 		ret = PTR_ERR(primary);
 		goto fail;
@@ -253,7 +258,11 @@ int intel_crtc_init(struct drm_i915_private *dev_priv, enum pipe pipe)
 	for_each_sprite(dev_priv, pipe, sprite) {
 		struct intel_plane *plane;
 
-		plane = intel_sprite_plane_create(dev_priv, pipe, sprite);
+		if (INTEL_GEN(dev_priv) >= 9)
+			plane = skl_universal_plane_create(dev_priv, pipe,
+							   PLANE_SPRITE0 + sprite);
+		else
+			plane = intel_sprite_plane_create(dev_priv, pipe, sprite);
 		if (IS_ERR(plane)) {
 			ret = PTR_ERR(plane);
 			goto fail;
drivers/gpu/drm/i915/display/intel_ddi.c +1 -0
index bf5fab6b433d..ee52f27d2290 100644
@@ -52,6 +52,7 @@
 #include "intel_sprite.h"
 #include "intel_tc.h"
 #include "intel_vdsc.h"
+#include "skl_universal_plane.h"
 
 static const u8 index_to_dp_signal_levels[] = {
 	[0] = DP_TRAIN_VOLTAGE_SWING_LEVEL_0 | DP_TRAIN_PRE_EMPH_LEVEL_0,
drivers/gpu/drm/i915/display/intel_display.c +25 -931

1,071 lines not on this page · raw message

drivers/gpu/drm/i915/display/intel_display.h +14 -13
index 604a183fef7d..379dd3e09f58 100644
@@ -52,6 +52,7 @@ struct intel_crtc_state;
 struct intel_digital_port;
 struct intel_dp;
 struct intel_encoder;
+struct intel_initial_plane_config;
 struct intel_load_detect_pipe;
 struct intel_plane;
 struct intel_plane_state;
@@ -508,7 +509,6 @@ void intel_link_compute_m_n(u16 bpp, int nlanes,
 			    struct intel_link_m_n *m_n,
 			    bool constant_n, bool fec_enable);
 bool is_ccs_modifier(u64 modifier);
-int intel_main_to_aux_plane(const struct drm_framebuffer *fb, int main_plane);
 void lpt_disable_clkout_dp(struct drm_i915_private *dev_priv);
 u32 intel_plane_fb_max_stride(struct drm_i915_private *dev_priv,
 			      u32 pixel_format, u64 modifier);
@@ -621,18 +621,7 @@ u32 skl_scaler_get_filter_select(enum drm_scaling_filter filter, int set);
 void skl_scaler_setup_filter(struct drm_i915_private *dev_priv, enum pipe pipe,
 			     int id, int set, enum drm_scaling_filter filter);
 void ilk_pfit_disable(const struct intel_crtc_state *old_crtc_state);
-u32 glk_plane_color_ctl(const struct intel_crtc_state *crtc_state,
-			const struct intel_plane_state *plane_state);
-u32 glk_plane_color_ctl_crtc(const struct intel_crtc_state *crtc_state);
-u32 skl_plane_ctl(const struct intel_crtc_state *crtc_state,
-		  const struct intel_plane_state *plane_state);
-u32 skl_plane_ctl_crtc(const struct intel_crtc_state *crtc_state);
-u32 skl_plane_stride(const struct intel_plane_state *plane_state,
-		     int plane);
-int skl_check_plane_surface(struct intel_plane_state *plane_state);
-int skl_calc_main_surface_offset(const struct intel_plane_state *plane_state,
-				 int *x, int *y, u32 *offset);
-int skl_format_to_fourcc(int format, bool rgb_order, bool alpha);
+
 int bdw_get_pipemisc_bpp(struct intel_crtc *crtc);
 unsigned int intel_plane_fence_y_offset(const struct intel_plane_state *plane_state);
 
@@ -655,6 +644,18 @@ struct intel_encoder *
 intel_get_crtc_new_encoder(const struct intel_atomic_state *state,
 			   const struct intel_crtc_state *crtc_state);
 
+unsigned int intel_surf_alignment(const struct drm_framebuffer *fb,
+				  int color_plane);
+void intel_fb_plane_get_subsampling(int *hsub, int *vsub,
+				    const struct drm_framebuffer *fb,
+				    int color_plane);
+u32 intel_plane_adjust_aligned_offset(int *x, int *y,
+				      const struct intel_plane_state *state,
+				      int color_plane,
+				      u32 old_offset, u32 new_offset);
+unsigned int intel_tile_width_bytes(const struct drm_framebuffer *fb, int color_plane);
+unsigned int intel_tile_height(const struct drm_framebuffer *fb, int color_plane);
+
 /* modesetting */
 void intel_modeset_init_hw(struct drm_i915_private *i915);
 int intel_modeset_init_noirq(struct drm_i915_private *i915);
drivers/gpu/drm/i915/display/intel_display_types.h +21 -0
index f951a09d6b12..7aef0616a013 100644
@@ -37,6 +37,7 @@
 #include <drm/drm_dp_mst_helper.h>
 #include <drm/drm_encoder.h>
 #include <drm/drm_fb_helper.h>
+#include <drm/drm_fourcc.h>
 #include <drm/drm_probe_helper.h>
 #include <drm/drm_rect.h>
 #include <drm/drm_vblank.h>
@@ -1861,4 +1862,24 @@ static inline u32 intel_fdi_link_freq(struct drm_i915_private *dev_priv,
 		return dev_priv->fdi_pll_freq;
 }
 
+static inline bool is_ccs_plane(const struct drm_framebuffer *fb, int plane)
+{
+	if (!is_ccs_modifier(fb->modifier))
+		return false;
+
+	return plane >= fb->format->num_planes / 2;
+}
+
+static inline bool is_gen12_ccs_modifier(u64 modifier)
+{
+	return modifier == I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS ||
+	       modifier == I915_FORMAT_MOD_Y_TILED_GEN12_MC_CCS;
+
+}
+
+static inline bool is_gen12_ccs_plane(const struct drm_framebuffer *fb, int plane)
+{
+	return is_gen12_ccs_modifier(fb->modifier) && is_ccs_plane(fb, plane);
+}
+
 #endif /*  __INTEL_DISPLAY_TYPES_H__ */
drivers/gpu/drm/i915/display/intel_dp_mst.c +1 -0
index f76e2c2a83b8..8e4b6647752f 100644
@@ -39,6 +39,7 @@
 #include "intel_dp_mst.h"
 #include "intel_dpio_phy.h"
 #include "intel_hdcp.h"
+#include "skl_universal_plane.h"
 
 static int intel_dp_mst_compute_link_config(struct intel_encoder *encoder,
 					    struct intel_crtc_state *crtc_state,
drivers/gpu/drm/i915/display/intel_psr.c +1 -0
index c24ae69426cf..0d0b0d3c52a1 100644
@@ -31,6 +31,7 @@
 #include "intel_psr.h"
 #include "intel_sprite.h"
 #include "intel_hdmi.h"
+#include "skl_universal_plane.h"
 
 /**
  * DOC: Panel Self Refresh (PSR/SRD)
drivers/gpu/drm/i915/display/intel_sprite.c +5 -1338

1,388 lines not on this page · raw message

drivers/gpu/drm/i915/display/intel_sprite.h +3 -3
index 76126dd8d584..418897f953fc 100644
@@ -38,9 +38,6 @@ void intel_pipe_update_end(struct intel_crtc_state *new_crtc_state);
 int intel_plane_check_stride(const struct intel_plane_state *plane_state);
 int intel_plane_check_src_coordinates(struct intel_plane_state *plane_state);
 int chv_plane_check_rotation(const struct intel_plane_state *plane_state);
-struct intel_plane *
-skl_universal_plane_create(struct drm_i915_private *dev_priv,
-			   enum pipe pipe, enum plane_id plane_id);
 
 static inline u8 icl_hdr_plane_mask(void)
 {
@@ -59,4 +56,7 @@ int hsw_plane_min_cdclk(const struct intel_crtc_state *crtc_state,
 int vlv_plane_min_cdclk(const struct intel_crtc_state *crtc_state,
 			const struct intel_plane_state *plane_state);
 
+void skl_program_scaler(struct intel_plane *plane,
+			const struct intel_crtc_state *crtc_state,
+			const struct intel_plane_state *plane_state);
 #endif /* __INTEL_SPRITE_H__ */
drivers/gpu/drm/i915/display/skl_universal_plane.c new file +2263 -0

365 lines not on this page · raw message

drivers/gpu/drm/i915/display/skl_universal_plane.h new file +32 -0
new file mode 100644
index 000000000000..8f199a15f330

Lines of this file are not shown. View the raw message.

drivers/gpu/drm/i915/display/vlv_dsi.c +1 -0
index f94025ec603a..ebf266457518 100644

Lines of this file are not shown. View the raw message.

drivers/gpu/drm/i915/intel_pm.c +1 -0
index bbc73df7f753..bc40ecc17a52 100644

Lines of this file are not shown. View the raw message.

The rest of this diff is not shown. View the raw message.

Signature · 6 lines
2.27.0

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

Part of the diff is not shown here. View the raw message.

author maintainer
#7 lore raw

PATCH 7/11 drm/i915: move pipe update code into crtc.

In reply to Dave Airlie

From: Dave Airlie <[email protected]>

Daniel suggested this should move here.

---
 drivers/gpu/drm/i915/display/intel_crtc.c   | 230 ++++++++++++++++++++
 drivers/gpu/drm/i915/display/intel_sprite.c | 228 -------------------
 2 files changed, 230 insertions(+), 228 deletions(-)
drivers/gpu/drm/i915/display/intel_crtc.c +230 -0
index eb478712c381..8825f960a121 100644
@@ -10,6 +10,9 @@
 #include <drm/drm_plane.h>
 #include <drm/drm_plane_helper.h>
 
+#include "i915_trace.h"
+#include "i915_vgpu.h"
+
 #include "intel_atomic.h"
 #include "intel_atomic_plane.h"
 #include "intel_color.h"
@@ -17,7 +20,9 @@
 #include "intel_cursor.h"
 #include "intel_display_debugfs.h"
 #include "intel_display_types.h"
+#include "intel_dsi.h"
 #include "intel_pipe_crc.h"
+#include "intel_psr.h"
 #include "intel_sprite.h"
 #include "i9xx_plane.h"
 #include "skl_universal_plane.h"
@@ -332,3 +337,228 @@ int intel_crtc_init(struct drm_i915_private *dev_priv, enum pipe pipe)
 
 	return ret;
 }
+
+int intel_usecs_to_scanlines(const struct drm_display_mode *adjusted_mode,
+			     int usecs)
+{
+	/* paranoia */
+	if (!adjusted_mode->crtc_htotal)
+		return 1;
+
+	return DIV_ROUND_UP(usecs * adjusted_mode->crtc_clock,
+			    1000 * adjusted_mode->crtc_htotal);
+}
+
+/**
+ * intel_pipe_update_start() - start update of a set of display registers
+ * @new_crtc_state: the new crtc state
+ *
+ * Mark the start of an update to pipe registers that should be updated
+ * atomically regarding vblank. If the next vblank will happens within
+ * the next 100 us, this function waits until the vblank passes.
+ *
+ * After a successful call to this function, interrupts will be disabled
+ * until a subsequent call to intel_pipe_update_end(). That is done to
+ * avoid random delays.
+ */
+void intel_pipe_update_start(const struct intel_crtc_state *new_crtc_state)
+{
+	struct intel_crtc *crtc = to_intel_crtc(new_crtc_state->uapi.crtc);
+	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
+	const struct drm_display_mode *adjusted_mode = &new_crtc_state->hw.adjusted_mode;
+	long timeout = msecs_to_jiffies_timeout(1);
+	int scanline, min, max, vblank_start;
+	wait_queue_head_t *wq = drm_crtc_vblank_waitqueue(&crtc->base);
+	bool need_vlv_dsi_wa = (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) &&
+		intel_crtc_has_type(new_crtc_state, INTEL_OUTPUT_DSI);
+	DEFINE_WAIT(wait);
+	u32 psr_status;
+
+	if (new_crtc_state->uapi.async_flip)
+		return;
+
+	vblank_start = adjusted_mode->crtc_vblank_start;
+	if (adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE)
+		vblank_start = DIV_ROUND_UP(vblank_start, 2);
+
+	/* FIXME needs to be calibrated sensibly */
+	min = vblank_start - intel_usecs_to_scanlines(adjusted_mode,
+						      VBLANK_EVASION_TIME_US);
+	max = vblank_start - 1;
+
+	if (min <= 0 || max <= 0)
+		goto irq_disable;
+
+	if (drm_WARN_ON(&dev_priv->drm, drm_crtc_vblank_get(&crtc->base)))
+		goto irq_disable;
+
+	/*
+	 * Wait for psr to idle out after enabling the VBL interrupts
+	 * VBL interrupts will start the PSR exit and prevent a PSR
+	 * re-entry as well.
+	 */
+	if (intel_psr_wait_for_idle(new_crtc_state, &psr_status))
+		drm_err(&dev_priv->drm,
+			"PSR idle timed out 0x%x, atomic update may fail\n",
+			psr_status);
+
+	local_irq_disable();
+
+	crtc->debug.min_vbl = min;
+	crtc->debug.max_vbl = max;
+	trace_intel_pipe_update_start(crtc);
+
+	for (;;) {
+		/*
+		 * prepare_to_wait() has a memory barrier, which guarantees
+		 * other CPUs can see the task state update by the time we
+		 * read the scanline.
+		 */
+		prepare_to_wait(wq, &wait, TASK_UNINTERRUPTIBLE);
+
+		scanline = intel_get_crtc_scanline(crtc);
+		if (scanline < min || scanline > max)
+			break;
+
+		if (!timeout) {
+			drm_err(&dev_priv->drm,
+				"Potential atomic update failure on pipe %c\n",
+				pipe_name(crtc->pipe));
+			break;
+		}
+
+		local_irq_enable();
+
+		timeout = schedule_timeout(timeout);
+
+		local_irq_disable();
+	}
+
+	finish_wait(wq, &wait);
+
+	drm_crtc_vblank_put(&crtc->base);
+
+	/*
+	 * On VLV/CHV DSI the scanline counter would appear to
+	 * increment approx. 1/3 of a scanline before start of vblank.
+	 * The registers still get latched at start of vblank however.
+	 * This means we must not write any registers on the first
+	 * line of vblank (since not the whole line is actually in
+	 * vblank). And unfortunately we can't use the interrupt to
+	 * wait here since it will fire too soon. We could use the
+	 * frame start interrupt instead since it will fire after the
+	 * critical scanline, but that would require more changes
+	 * in the interrupt code. So for now we'll just do the nasty
+	 * thing and poll for the bad scanline to pass us by.
+	 *
+	 * FIXME figure out if BXT+ DSI suffers from this as well
+	 */
+	while (need_vlv_dsi_wa && scanline == vblank_start)
+		scanline = intel_get_crtc_scanline(crtc);
+
+	crtc->debug.scanline_start = scanline;
+	crtc->debug.start_vbl_time = ktime_get();
+	crtc->debug.start_vbl_count = intel_crtc_get_vblank_counter(crtc);
+
+	trace_intel_pipe_update_vblank_evaded(crtc);
+	return;
+
+irq_disable:
+	local_irq_disable();
+}
+
+#if IS_ENABLED(CONFIG_DRM_I915_DEBUG_VBLANK_EVADE)
+static void dbg_vblank_evade(struct intel_crtc *crtc, ktime_t end)
+{
+	u64 delta = ktime_to_ns(ktime_sub(end, crtc->debug.start_vbl_time));
+	unsigned int h;
+
+	h = ilog2(delta >> 9);
+	if (h >= ARRAY_SIZE(crtc->debug.vbl.times))
+		h = ARRAY_SIZE(crtc->debug.vbl.times) - 1;
+	crtc->debug.vbl.times[h]++;
+
+	crtc->debug.vbl.sum += delta;
+	if (!crtc->debug.vbl.min || delta < crtc->debug.vbl.min)
+		crtc->debug.vbl.min = delta;
+	if (delta > crtc->debug.vbl.max)
+		crtc->debug.vbl.max = delta;
+
+	if (delta > 1000 * VBLANK_EVASION_TIME_US) {
+		drm_dbg_kms(crtc->base.dev,
+			    "Atomic update on pipe (%c) took %lld us, max time under evasion is %u us\n",
+			    pipe_name(crtc->pipe),
+			    div_u64(delta, 1000),
+			    VBLANK_EVASION_TIME_US);
+		crtc->debug.vbl.over++;
+	}
+}
+#else
+static void dbg_vblank_evade(struct intel_crtc *crtc, ktime_t end) {}
+#endif
+
+/**
+ * intel_pipe_update_end() - end update of a set of display registers
+ * @new_crtc_state: the new crtc state
+ *
+ * Mark the end of an update started with intel_pipe_update_start(). This
+ * re-enables interrupts and verifies the update was actually completed
+ * before a vblank.
+ */
+void intel_pipe_update_end(struct intel_crtc_state *new_crtc_state)
+{
+	struct intel_crtc *crtc = to_intel_crtc(new_crtc_state->uapi.crtc);
+	enum pipe pipe = crtc->pipe;
+	int scanline_end = intel_get_crtc_scanline(crtc);
+	u32 end_vbl_count = intel_crtc_get_vblank_counter(crtc);
+	ktime_t end_vbl_time = ktime_get();
+	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
+
+	if (new_crtc_state->uapi.async_flip)
+		return;
+
+	trace_intel_pipe_update_end(crtc, end_vbl_count, scanline_end);
+
+	/*
+	 * Incase of mipi dsi command mode, we need to set frame update
+	 * request for every commit.
+	 */
+	if (INTEL_GEN(dev_priv) >= 11 &&
+	    intel_crtc_has_type(new_crtc_state, INTEL_OUTPUT_DSI))
+		icl_dsi_frame_update(new_crtc_state);
+
+	/* We're still in the vblank-evade critical section, this can't race.
+	 * Would be slightly nice to just grab the vblank count and arm the
+	 * event outside of the critical section - the spinlock might spin for a
+	 * while ... */
+	if (new_crtc_state->uapi.event) {
+		drm_WARN_ON(&dev_priv->drm,
+			    drm_crtc_vblank_get(&crtc->base) != 0);
+
+		spin_lock(&crtc->base.dev->event_lock);
+		drm_crtc_arm_vblank_event(&crtc->base,
+					  new_crtc_state->uapi.event);
+		spin_unlock(&crtc->base.dev->event_lock);
+
+		new_crtc_state->uapi.event = NULL;
+	}
+
+	local_irq_enable();
+
+	if (intel_vgpu_active(dev_priv))
+		return;
+
+	if (crtc->debug.start_vbl_count &&
+	    crtc->debug.start_vbl_count != end_vbl_count) {
+		drm_err(&dev_priv->drm,
+			"Atomic update failure on pipe %c (start=%u end=%u) time %lld us, min %d, max %d, scanline start %d, end %d\n",
+			pipe_name(pipe), crtc->debug.start_vbl_count,
+			end_vbl_count,
+			ktime_us_delta(end_vbl_time,
+				       crtc->debug.start_vbl_time),
+			crtc->debug.min_vbl, crtc->debug.max_vbl,
+			crtc->debug.scanline_start, scanline_end);
+	}
+
+	dbg_vblank_evade(crtc, end_vbl_time);
+}
drivers/gpu/drm/i915/display/intel_sprite.c +0 -228

237 lines not on this page · raw message

Signature · 6 lines
2.27.0

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
author maintainer
#8 lore raw

PATCH 8/11 drm/i915: split fb scalable checks into g4x and skl versions

In reply to Dave Airlie

From: Dave Airlie <[email protected]>

This just cleans these up a bit.

---
 drivers/gpu/drm/i915/display/intel_sprite.c        | 7 +++----
 drivers/gpu/drm/i915/display/skl_universal_plane.c | 4 ++--
 2 files changed, 5 insertions(+), 6 deletions(-)
drivers/gpu/drm/i915/display/intel_sprite.c +3 -4
index 7d779402cef7..9995bf6c39b9 100644
@@ -1345,19 +1345,18 @@ g4x_plane_get_hw_state(struct intel_plane *plane,
 	return ret;
 }
 
-static bool intel_fb_scalable(const struct drm_framebuffer *fb)
+static bool g4x_fb_scalable(const struct drm_framebuffer *fb)
 {
 	if (!fb)
 		return false;
 
 	switch (fb->format->format) {
 	case DRM_FORMAT_C8:
-		return false;
 	case DRM_FORMAT_XRGB16161616F:
 	case DRM_FORMAT_ARGB16161616F:
 	case DRM_FORMAT_XBGR16161616F:
 	case DRM_FORMAT_ABGR16161616F:
-		return INTEL_GEN(to_i915(fb->dev)) >= 11;
+		return false;
 	default:
 		return true;
 	}
@@ -1434,7 +1433,7 @@ g4x_sprite_check(struct intel_crtc_state *crtc_state,
 	int max_scale = DRM_PLANE_HELPER_NO_SCALING;
 	int ret;
 
-	if (intel_fb_scalable(plane_state->hw.fb)) {
+	if (g4x_fb_scalable(plane_state->hw.fb)) {
 		if (INTEL_GEN(dev_priv) < 7) {
 			min_scale = 1;
 			max_scale = 16 << 16;
drivers/gpu/drm/i915/display/skl_universal_plane.c +2 -2
index f9659079ac18..fb590580223e 100644
@@ -1645,7 +1645,7 @@ static int skl_check_plane_surface(struct intel_plane_state *plane_state)
 	return 0;
 }
 
-static bool intel_fb_scalable(const struct drm_framebuffer *fb)
+static bool skl_fb_scalable(const struct drm_framebuffer *fb)
 {
 	if (!fb)
 		return false;
@@ -1678,7 +1678,7 @@ static int skl_plane_check(struct intel_crtc_state *crtc_state,
 		return ret;
 
 	/* use scaler when colorkey is not required */
-	if (!plane_state->ckey.flags && intel_fb_scalable(fb)) {
+	if (!plane_state->ckey.flags && skl_fb_scalable(fb)) {
 		min_scale = 1;
 		max_scale = skl_plane_max_scale(dev_priv, fb);
 	}
Signature · 6 lines
2.27.0

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
author maintainer
#9 lore raw

PATCH 9/11 drm/i915: move is_ccs_modifier to an inline

In reply to Dave Airlie

From: Dave Airlie <[email protected]>

There is no need for this to be out of line.

---
 drivers/gpu/drm/i915/display/intel_display.c       | 8 --------
 drivers/gpu/drm/i915/display/intel_display.h       | 1 -
 drivers/gpu/drm/i915/display/intel_display_types.h | 8 ++++++++
 3 files changed, 8 insertions(+), 9 deletions(-)
drivers/gpu/drm/i915/display/intel_display.c +0 -8
index eba2fe5e9192..5a4c8843cd74 100644
@@ -1791,14 +1791,6 @@ intel_get_format_info(const struct drm_mode_fb_cmd2 *cmd)
 	}
 }
 
-bool is_ccs_modifier(u64 modifier)
-{
-	return modifier == I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS ||
-	       modifier == I915_FORMAT_MOD_Y_TILED_GEN12_MC_CCS ||
-	       modifier == I915_FORMAT_MOD_Y_TILED_CCS ||
-	       modifier == I915_FORMAT_MOD_Yf_TILED_CCS;
-}
-
 static int gen12_ccs_aux_stride(struct drm_framebuffer *fb, int ccs_plane)
 {
 	return DIV_ROUND_UP(fb->pitches[skl_ccs_to_main_plane(fb, ccs_plane)],
drivers/gpu/drm/i915/display/intel_display.h +0 -1
index 379dd3e09f58..33dbc05c76a2 100644
@@ -508,7 +508,6 @@ void intel_link_compute_m_n(u16 bpp, int nlanes,
 			    int pixel_clock, int link_clock,
 			    struct intel_link_m_n *m_n,
 			    bool constant_n, bool fec_enable);
-bool is_ccs_modifier(u64 modifier);
 void lpt_disable_clkout_dp(struct drm_i915_private *dev_priv);
 u32 intel_plane_fb_max_stride(struct drm_i915_private *dev_priv,
 			      u32 pixel_format, u64 modifier);
drivers/gpu/drm/i915/display/intel_display_types.h +8 -0
index 7aef0616a013..bf944c8a5011 100644
@@ -1862,6 +1862,14 @@ static inline u32 intel_fdi_link_freq(struct drm_i915_private *dev_priv,
 		return dev_priv->fdi_pll_freq;
 }
 
+static inline bool is_ccs_modifier(u64 modifier)
+{
+	return modifier == I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS ||
+	       modifier == I915_FORMAT_MOD_Y_TILED_GEN12_MC_CCS ||
+	       modifier == I915_FORMAT_MOD_Y_TILED_CCS ||
+	       modifier == I915_FORMAT_MOD_Yf_TILED_CCS;
+}
+
 static inline bool is_ccs_plane(const struct drm_framebuffer *fb, int plane)
 {
 	if (!is_ccs_modifier(fb->modifier))
Signature · 6 lines
2.27.0

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
author maintainer
#10 lore raw

PATCH 10/11 drm/i915: migrate pll enable/disable code to intel_dpll.[ch]

In reply to Dave Airlie

From: Dave Airlie <[email protected]>

This moves the older i9xx/vlv/chv enable/disable to dpll file.

---
 drivers/gpu/drm/i915/display/intel_display.c | 512 -------------------
 drivers/gpu/drm/i915/display/intel_display.h |   3 -
 drivers/gpu/drm/i915/display/intel_dp.c      |   1 +
 drivers/gpu/drm/i915/display/intel_dpll.c    | 509 ++++++++++++++++++
 drivers/gpu/drm/i915/display/intel_dpll.h    |  17 +
 5 files changed, 527 insertions(+), 515 deletions(-)
drivers/gpu/drm/i915/display/intel_display.c +0 -512
index 5a4c8843cd74..6a0746baba40 100644
@@ -109,10 +109,6 @@ static void i9xx_set_pipeconf(const struct intel_crtc_state *crtc_state);
 static void ilk_set_pipeconf(const struct intel_crtc_state *crtc_state);
 static void hsw_set_pipeconf(const struct intel_crtc_state *crtc_state);
 static void bdw_set_pipemisc(const struct intel_crtc_state *crtc_state);
-static void vlv_prepare_pll(struct intel_crtc *crtc,
-			    const struct intel_crtc_state *pipe_config);
-static void chv_prepare_pll(struct intel_crtc *crtc,
-			    const struct intel_crtc_state *pipe_config);
 static void ilk_pfit_enable(const struct intel_crtc_state *crtc_state);
 static void intel_modeset_setup_hw_state(struct drm_device *dev,
 					 struct drm_modeset_acquire_ctx *ctx);
@@ -565,224 +561,6 @@ static void assert_pch_ports_disabled(struct drm_i915_private *dev_priv,
 	assert_pch_hdmi_disabled(dev_priv, pipe, PORT_D, PCH_HDMID);
 }
 
-static void _vlv_enable_pll(struct intel_crtc *crtc,
-			    const struct intel_crtc_state *pipe_config)
-{
-	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
-	enum pipe pipe = crtc->pipe;
-
-	intel_de_write(dev_priv, DPLL(pipe), pipe_config->dpll_hw_state.dpll);
-	intel_de_posting_read(dev_priv, DPLL(pipe));
-	udelay(150);
-
-	if (intel_de_wait_for_set(dev_priv, DPLL(pipe), DPLL_LOCK_VLV, 1))
-		drm_err(&dev_priv->drm, "DPLL %d failed to lock\n", pipe);
-}
-
-static void vlv_enable_pll(struct intel_crtc *crtc,
-			   const struct intel_crtc_state *pipe_config)
-{
-	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
-	enum pipe pipe = crtc->pipe;
-
-	assert_pipe_disabled(dev_priv, pipe_config->cpu_transcoder);
-
-	/* PLL is protected by panel, make sure we can write it */
-	assert_panel_unlocked(dev_priv, pipe);
-
-	if (pipe_config->dpll_hw_state.dpll & DPLL_VCO_ENABLE)
-		_vlv_enable_pll(crtc, pipe_config);
-
-	intel_de_write(dev_priv, DPLL_MD(pipe),
-		       pipe_config->dpll_hw_state.dpll_md);
-	intel_de_posting_read(dev_priv, DPLL_MD(pipe));
-}
-
-
-static void _chv_enable_pll(struct intel_crtc *crtc,
-			    const struct intel_crtc_state *pipe_config)
-{
-	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
-	enum pipe pipe = crtc->pipe;
-	enum dpio_channel port = vlv_pipe_to_channel(pipe);
-	u32 tmp;
-
-	vlv_dpio_get(dev_priv);
-
-	/* Enable back the 10bit clock to display controller */
-	tmp = vlv_dpio_read(dev_priv, pipe, CHV_CMN_DW14(port));
-	tmp |= DPIO_DCLKP_EN;
-	vlv_dpio_write(dev_priv, pipe, CHV_CMN_DW14(port), tmp);
-
-	vlv_dpio_put(dev_priv);
-
-	/*
-	 * Need to wait > 100ns between dclkp clock enable bit and PLL enable.
-	 */
-	udelay(1);
-
-	/* Enable PLL */
-	intel_de_write(dev_priv, DPLL(pipe), pipe_config->dpll_hw_state.dpll);
-
-	/* Check PLL is locked */
-	if (intel_de_wait_for_set(dev_priv, DPLL(pipe), DPLL_LOCK_VLV, 1))
-		drm_err(&dev_priv->drm, "PLL %d failed to lock\n", pipe);
-}
-
-static void chv_enable_pll(struct intel_crtc *crtc,
-			   const struct intel_crtc_state *pipe_config)
-{
-	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
-	enum pipe pipe = crtc->pipe;
-
-	assert_pipe_disabled(dev_priv, pipe_config->cpu_transcoder);
-
-	/* PLL is protected by panel, make sure we can write it */
-	assert_panel_unlocked(dev_priv, pipe);
-
-	if (pipe_config->dpll_hw_state.dpll & DPLL_VCO_ENABLE)
-		_chv_enable_pll(crtc, pipe_config);
-
-	if (pipe != PIPE_A) {
-		/*
-		 * WaPixelRepeatModeFixForC0:chv
-		 *
-		 * DPLLCMD is AWOL. Use chicken bits to propagate
-		 * the value from DPLLBMD to either pipe B or C.
-		 */
-		intel_de_write(dev_priv, CBR4_VLV, CBR_DPLLBMD_PIPE(pipe));
-		intel_de_write(dev_priv, DPLL_MD(PIPE_B),
-			       pipe_config->dpll_hw_state.dpll_md);
-		intel_de_write(dev_priv, CBR4_VLV, 0);
-		dev_priv->chv_dpll_md[pipe] = pipe_config->dpll_hw_state.dpll_md;
-
-		/*
-		 * DPLLB VGA mode also seems to cause problems.
-		 * We should always have it disabled.
-		 */
-		drm_WARN_ON(&dev_priv->drm,
-			    (intel_de_read(dev_priv, DPLL(PIPE_B)) &
-			     DPLL_VGA_MODE_DIS) == 0);
-	} else {
-		intel_de_write(dev_priv, DPLL_MD(pipe),
-			       pipe_config->dpll_hw_state.dpll_md);
-		intel_de_posting_read(dev_priv, DPLL_MD(pipe));
-	}
-}
-
-static bool i9xx_has_pps(struct drm_i915_private *dev_priv)
-{
-	if (IS_I830(dev_priv))
-		return false;
-
-	return IS_PINEVIEW(dev_priv) || IS_MOBILE(dev_priv);
-}
-
-static void i9xx_enable_pll(struct intel_crtc *crtc,
-			    const struct intel_crtc_state *crtc_state)
-{
-	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
-	i915_reg_t reg = DPLL(crtc->pipe);
-	u32 dpll = crtc_state->dpll_hw_state.dpll;
-	int i;
-
-	assert_pipe_disabled(dev_priv, crtc_state->cpu_transcoder);
-
-	/* PLL is protected by panel, make sure we can write it */
-	if (i9xx_has_pps(dev_priv))
-		assert_panel_unlocked(dev_priv, crtc->pipe);
-
-	/*
-	 * Apparently we need to have VGA mode enabled prior to changing
-	 * the P1/P2 dividers. Otherwise the DPLL will keep using the old
-	 * dividers, even though the register value does change.
-	 */
-	intel_de_write(dev_priv, reg, dpll & ~DPLL_VGA_MODE_DIS);
-	intel_de_write(dev_priv, reg, dpll);
-
-	/* Wait for the clocks to stabilize. */
-	intel_de_posting_read(dev_priv, reg);
-	udelay(150);
-
-	if (INTEL_GEN(dev_priv) >= 4) {
-		intel_de_write(dev_priv, DPLL_MD(crtc->pipe),
-			       crtc_state->dpll_hw_state.dpll_md);
-	} else {
-		/* The pixel multiplier can only be updated once the
-		 * DPLL is enabled and the clocks are stable.
-		 *
-		 * So write it again.
-		 */
-		intel_de_write(dev_priv, reg, dpll);
-	}
-
-	/* We do this three times for luck */
-	for (i = 0; i < 3; i++) {
-		intel_de_write(dev_priv, reg, dpll);
-		intel_de_posting_read(dev_priv, reg);
-		udelay(150); /* wait for warmup */
-	}
-}
-
-static void i9xx_disable_pll(const struct intel_crtc_state *crtc_state)
-{
-	struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
-	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
-	enum pipe pipe = crtc->pipe;
-
-	/* Don't disable pipe or pipe PLLs if needed */
-	if (IS_I830(dev_priv))
-		return;
-
-	/* Make sure the pipe isn't still relying on us */
-	assert_pipe_disabled(dev_priv, crtc_state->cpu_transcoder);
-
-	intel_de_write(dev_priv, DPLL(pipe), DPLL_VGA_MODE_DIS);
-	intel_de_posting_read(dev_priv, DPLL(pipe));
-}
-
-static void vlv_disable_pll(struct drm_i915_private *dev_priv, enum pipe pipe)
-{
-	u32 val;
-
-	/* Make sure the pipe isn't still relying on us */
-	assert_pipe_disabled(dev_priv, (enum transcoder)pipe);
-
-	val = DPLL_INTEGRATED_REF_CLK_VLV |
-		DPLL_REF_CLK_ENABLE_VLV | DPLL_VGA_MODE_DIS;
-	if (pipe != PIPE_A)
-		val |= DPLL_INTEGRATED_CRI_CLK_VLV;
-
-	intel_de_write(dev_priv, DPLL(pipe), val);
-	intel_de_posting_read(dev_priv, DPLL(pipe));
-}
-
-static void chv_disable_pll(struct drm_i915_private *dev_priv, enum pipe pipe)
-{
-	enum dpio_channel port = vlv_pipe_to_channel(pipe);
-	u32 val;
-
-	/* Make sure the pipe isn't still relying on us */
-	assert_pipe_disabled(dev_priv, (enum transcoder)pipe);
-
-	val = DPLL_SSC_REF_CLK_CHV |
-		DPLL_REF_CLK_ENABLE_VLV | DPLL_VGA_MODE_DIS;
-	if (pipe != PIPE_A)
-		val |= DPLL_INTEGRATED_CRI_CLK_VLV;
-
-	intel_de_write(dev_priv, DPLL(pipe), val);
-	intel_de_posting_read(dev_priv, DPLL(pipe));
-
-	vlv_dpio_get(dev_priv);
-
-	/* Disable 10bit clock to display controller */
-	val = vlv_dpio_read(dev_priv, pipe, CHV_CMN_DW14(port));
-	val &= ~DPIO_DCLKP_EN;
-	vlv_dpio_write(dev_priv, pipe, CHV_CMN_DW14(port), val);
-
-	vlv_dpio_put(dev_priv);
-}
-
 void vlv_wait_port_ready(struct drm_i915_private *dev_priv,
 			 struct intel_digital_port *dig_port,
 			 unsigned int expected_mask)
@@ -5709,35 +5487,6 @@ static void intel_panel_sanitize_ssc(struct drm_i915_private *dev_priv)
 	}
 }
 
-static void vlv_pllb_recal_opamp(struct drm_i915_private *dev_priv, enum pipe
-		pipe)
-{
-	u32 reg_val;
-
-	/*
-	 * PLLB opamp always calibrates to max value of 0x3f, force enable it
-	 * and set it to a reasonable value instead.
-	 */
-	reg_val = vlv_dpio_read(dev_priv, pipe, VLV_PLL_DW9(1));
-	reg_val &= 0xffffff00;
-	reg_val |= 0x00000030;
-	vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW9(1), reg_val);
-
-	reg_val = vlv_dpio_read(dev_priv, pipe, VLV_REF_DW13);
-	reg_val &= 0x00ffffff;
-	reg_val |= 0x8c000000;
-	vlv_dpio_write(dev_priv, pipe, VLV_REF_DW13, reg_val);
-
-	reg_val = vlv_dpio_read(dev_priv, pipe, VLV_PLL_DW9(1));
-	reg_val &= 0xffffff00;
-	vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW9(1), reg_val);
-
-	reg_val = vlv_dpio_read(dev_priv, pipe, VLV_REF_DW13);
-	reg_val &= 0x00ffffff;
-	reg_val |= 0xb0000000;
-	vlv_dpio_write(dev_priv, pipe, VLV_REF_DW13, reg_val);
-}
-
 static void intel_pch_transcoder_set_m_n(const struct intel_crtc_state *crtc_state,
 					 const struct intel_link_m_n *m_n)
 {
@@ -5833,267 +5582,6 @@ void intel_dp_set_m_n(const struct intel_crtc_state *crtc_state, enum link_m_n_s
 		intel_cpu_transcoder_set_m_n(crtc_state, dp_m_n, dp_m2_n2);
 }
 
-static void vlv_prepare_pll(struct intel_crtc *crtc,
-			    const struct intel_crtc_state *pipe_config)
-{
-	struct drm_device *dev = crtc->base.dev;
-	struct drm_i915_private *dev_priv = to_i915(dev);
-	enum pipe pipe = crtc->pipe;
-	u32 mdiv;
-	u32 bestn, bestm1, bestm2, bestp1, bestp2;
-	u32 coreclk, reg_val;
-
-	/* Enable Refclk */
-	intel_de_write(dev_priv, DPLL(pipe),
-		       pipe_config->dpll_hw_state.dpll & ~(DPLL_VCO_ENABLE | DPLL_EXT_BUFFER_ENABLE_VLV));
-
-	/* No need to actually set up the DPLL with DSI */
-	if ((pipe_config->dpll_hw_state.dpll & DPLL_VCO_ENABLE) == 0)
-		return;
-
-	vlv_dpio_get(dev_priv);
-
-	bestn = pipe_config->dpll.n;
-	bestm1 = pipe_config->dpll.m1;
-	bestm2 = pipe_config->dpll.m2;
-	bestp1 = pipe_config->dpll.p1;
-	bestp2 = pipe_config->dpll.p2;
-
-	/* See eDP HDMI DPIO driver vbios notes doc */
-
-	/* PLL B needs special handling */
-	if (pipe == PIPE_B)
-		vlv_pllb_recal_opamp(dev_priv, pipe);
-
-	/* Set up Tx target for periodic Rcomp update */
-	vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW9_BCAST, 0x0100000f);
-
-	/* Disable target IRef on PLL */
-	reg_val = vlv_dpio_read(dev_priv, pipe, VLV_PLL_DW8(pipe));
-	reg_val &= 0x00ffffff;
-	vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW8(pipe), reg_val);
-
-	/* Disable fast lock */
-	vlv_dpio_write(dev_priv, pipe, VLV_CMN_DW0, 0x610);
-
-	/* Set idtafcrecal before PLL is enabled */
-	mdiv = ((bestm1 << DPIO_M1DIV_SHIFT) | (bestm2 & DPIO_M2DIV_MASK));
-	mdiv |= ((bestp1 << DPIO_P1_SHIFT) | (bestp2 << DPIO_P2_SHIFT));
-	mdiv |= ((bestn << DPIO_N_SHIFT));
-	mdiv |= (1 << DPIO_K_SHIFT);
-
-	/*
-	 * Post divider depends on pixel clock rate, DAC vs digital (and LVDS,
-	 * but we don't support that).
-	 * Note: don't use the DAC post divider as it seems unstable.
-	 */
-	mdiv |= (DPIO_POST_DIV_HDMIDP << DPIO_POST_DIV_SHIFT);
-	vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW3(pipe), mdiv);
-
-	mdiv |= DPIO_ENABLE_CALIBRATION;
-	vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW3(pipe), mdiv);
-
-	/* Set HBR and RBR LPF coefficients */
-	if (pipe_config->port_clock == 162000 ||
-	    intel_crtc_has_type(pipe_config, INTEL_OUTPUT_ANALOG) ||
-	    intel_crtc_has_type(pipe_config, INTEL_OUTPUT_HDMI))
-		vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW10(pipe),
-				 0x009f0003);
-	else
-		vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW10(pipe),
-				 0x00d0000f);
-
-	if (intel_crtc_has_dp_encoder(pipe_config)) {
-		/* Use SSC source */
-		if (pipe == PIPE_A)
-			vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW5(pipe),
-					 0x0df40000);
-		else
-			vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW5(pipe),
-					 0x0df70000);
-	} else { /* HDMI or VGA */
-		/* Use bend source */
-		if (pipe == PIPE_A)
-			vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW5(pipe),
-					 0x0df70000);
-		else
-			vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW5(pipe),
-					 0x0df40000);
-	}
-
-	coreclk = vlv_dpio_read(dev_priv, pipe, VLV_PLL_DW7(pipe));
-	coreclk = (coreclk & 0x0000ff00) | 0x01c00000;
-	if (intel_crtc_has_dp_encoder(pipe_config))
-		coreclk |= 0x01000000;
-	vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW7(pipe), coreclk);
-
-	vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW11(pipe), 0x87871000);
-
-	vlv_dpio_put(dev_priv);
-}
-
-static void chv_prepare_pll(struct intel_crtc *crtc,
-			    const struct intel_crtc_state *pipe_config)
-{
-	struct drm_device *dev = crtc->base.dev;
-	struct drm_i915_private *dev_priv = to_i915(dev);
-	enum pipe pipe = crtc->pipe;
-	enum dpio_channel port = vlv_pipe_to_channel(pipe);
-	u32 loopfilter, tribuf_calcntr;
-	u32 bestn, bestm1, bestm2, bestp1, bestp2, bestm2_frac;
-	u32 dpio_val;
-	int vco;
-
-	/* Enable Refclk and SSC */
-	intel_de_write(dev_priv, DPLL(pipe),
-		       pipe_config->dpll_hw_state.dpll & ~DPLL_VCO_ENABLE);
-
-	/* No need to actually set up the DPLL with DSI */
-	if ((pipe_config->dpll_hw_state.dpll & DPLL_VCO_ENABLE) == 0)
-		return;
-
-	bestn = pipe_config->dpll.n;
-	bestm2_frac = pipe_config->dpll.m2 & 0x3fffff;
-	bestm1 = pipe_config->dpll.m1;
-	bestm2 = pipe_config->dpll.m2 >> 22;
-	bestp1 = pipe_config->dpll.p1;
-	bestp2 = pipe_config->dpll.p2;
-	vco = pipe_config->dpll.vco;
-	dpio_val = 0;
-	loopfilter = 0;
-
-	vlv_dpio_get(dev_priv);
-
-	/* p1 and p2 divider */
-	vlv_dpio_write(dev_priv, pipe, CHV_CMN_DW13(port),
-			5 << DPIO_CHV_S1_DIV_SHIFT |
-			bestp1 << DPIO_CHV_P1_DIV_SHIFT |
-			bestp2 << DPIO_CHV_P2_DIV_SHIFT |
-			1 << DPIO_CHV_K_DIV_SHIFT);
-
-	/* Feedback post-divider - m2 */
-	vlv_dpio_write(dev_priv, pipe, CHV_PLL_DW0(port), bestm2);
-
-	/* Feedback refclk divider - n and m1 */
-	vlv_dpio_write(dev_priv, pipe, CHV_PLL_DW1(port),
-			DPIO_CHV_M1_DIV_BY_2 |
-			1 << DPIO_CHV_N_DIV_SHIFT);
-
-	/* M2 fraction division */
-	vlv_dpio_write(dev_priv, pipe, CHV_PLL_DW2(port), bestm2_frac);
-
-	/* M2 fraction division enable */
-	dpio_val = vlv_dpio_read(dev_priv, pipe, CHV_PLL_DW3(port));
-	dpio_val &= ~(DPIO_CHV_FEEDFWD_GAIN_MASK | DPIO_CHV_FRAC_DIV_EN);
-	dpio_val |= (2 << DPIO_CHV_FEEDFWD_GAIN_SHIFT);
-	if (bestm2_frac)
-		dpio_val |= DPIO_CHV_FRAC_DIV_EN;
-	vlv_dpio_write(dev_priv, pipe, CHV_PLL_DW3(port), dpio_val);
-
-	/* Program digital lock detect threshold */
-	dpio_val = vlv_dpio_read(dev_priv, pipe, CHV_PLL_DW9(port));
-	dpio_val &= ~(DPIO_CHV_INT_LOCK_THRESHOLD_MASK |
-					DPIO_CHV_INT_LOCK_THRESHOLD_SEL_COARSE);
-	dpio_val |= (0x5 << DPIO_CHV_INT_LOCK_THRESHOLD_SHIFT);
-	if (!bestm2_frac)
-		dpio_val |= DPIO_CHV_INT_LOCK_THRESHOLD_SEL_COARSE;
-	vlv_dpio_write(dev_priv, pipe, CHV_PLL_DW9(port), dpio_val);
-
-	/* Loop filter */
-	if (vco == 5400000) {
-		loopfilter |= (0x3 << DPIO_CHV_PROP_COEFF_SHIFT);
-		loopfilter |= (0x8 << DPIO_CHV_INT_COEFF_SHIFT);
-		loopfilter |= (0x1 << DPIO_CHV_GAIN_CTRL_SHIFT);
-		tribuf_calcntr = 0x9;
-	} else if (vco <= 6200000) {
-		loopfilter |= (0x5 << DPIO_CHV_PROP_COEFF_SHIFT);
-		loopfilter |= (0xB << DPIO_CHV_INT_COEFF_SHIFT);
-		loopfilter |= (0x3 << DPIO_CHV_GAIN_CTRL_SHIFT);
-		tribuf_calcntr = 0x9;
-	} else if (vco <= 6480000) {
-		loopfilter |= (0x4 << DPIO_CHV_PROP_COEFF_SHIFT);
-		loopfilter |= (0x9 << DPIO_CHV_INT_COEFF_SHIFT);
-		loopfilter |= (0x3 << DPIO_CHV_GAIN_CTRL_SHIFT);
-		tribuf_calcntr = 0x8;
-	} else {
-		/* Not supported. Apply the same limits as in the max case */
-		loopfilter |= (0x4 << DPIO_CHV_PROP_COEFF_SHIFT);
-		loopfilter |= (0x9 << DPIO_CHV_INT_COEFF_SHIFT);
-		loopfilter |= (0x3 << DPIO_CHV_GAIN_CTRL_SHIFT);
-		tribuf_calcntr = 0;
-	}
-	vlv_dpio_write(dev_priv, pipe, CHV_PLL_DW6(port), loopfilter);
-
-	dpio_val = vlv_dpio_read(dev_priv, pipe, CHV_PLL_DW8(port));
-	dpio_val &= ~DPIO_CHV_TDC_TARGET_CNT_MASK;
-	dpio_val |= (tribuf_calcntr << DPIO_CHV_TDC_TARGET_CNT_SHIFT);
-	vlv_dpio_write(dev_priv, pipe, CHV_PLL_DW8(port), dpio_val);
-
-	/* AFC Recal */
-	vlv_dpio_write(dev_priv, pipe, CHV_CMN_DW14(port),
-			vlv_dpio_read(dev_priv, pipe, CHV_CMN_DW14(port)) |
-			DPIO_AFC_RECAL);
-
-	vlv_dpio_put(dev_priv);
-}
-
-/**
- * vlv_force_pll_on - forcibly enable just the PLL
- * @dev_priv: i915 private structure
- * @pipe: pipe PLL to enable
- * @dpll: PLL configuration
- *
- * Enable the PLL for @pipe using the supplied @dpll config. To be used
- * in cases where we need the PLL enabled even when @pipe is not going to
- * be enabled.
- */
-int vlv_force_pll_on(struct drm_i915_private *dev_priv, enum pipe pipe,
-		     const struct dpll *dpll)
-{
-	struct intel_crtc *crtc = intel_get_crtc_for_pipe(dev_priv, pipe);
-	struct intel_crtc_state *pipe_config;
-
-	pipe_config = intel_crtc_state_alloc(crtc);
-	if (!pipe_config)
-		return -ENOMEM;
-
-	pipe_config->cpu_transcoder = (enum transcoder)pipe;
-	pipe_config->pixel_multiplier = 1;
-	pipe_config->dpll = *dpll;
-
-	if (IS_CHERRYVIEW(dev_priv)) {
-		chv_compute_dpll(crtc, pipe_config);
-		chv_prepare_pll(crtc, pipe_config);
-		chv_enable_pll(crtc, pipe_config);
-	} else {
-		vlv_compute_dpll(crtc, pipe_config);
-		vlv_prepare_pll(crtc, pipe_config);
-		vlv_enable_pll(crtc, pipe_config);
-	}
-
-	kfree(pipe_config);
-
-	return 0;
-}
-
-/**
- * vlv_force_pll_off - forcibly disable just the PLL
- * @dev_priv: i915 private structure
- * @pipe: pipe PLL to disable
- *
- * Disable the PLL for @pipe. To be used in cases where we need
- * the PLL enabled even when @pipe is not going to be enabled.
- */
-void vlv_force_pll_off(struct drm_i915_private *dev_priv, enum pipe pipe)
-{
-	if (IS_CHERRYVIEW(dev_priv))
-		chv_disable_pll(dev_priv, pipe);
-	else
-		vlv_disable_pll(dev_priv, pipe);
-}
-
-
-
 static void intel_set_transcoder_timings(const struct intel_crtc_state *crtc_state)
 {
 	struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
drivers/gpu/drm/i915/display/intel_display.h +0 -3
index 33dbc05c76a2..b29a9207ca9c 100644
@@ -586,9 +586,6 @@ void intel_cleanup_plane_fb(struct drm_plane *plane,
 void assert_pch_transcoder_disabled(struct drm_i915_private *dev_priv,
 				    enum pipe pipe);
 
-int vlv_force_pll_on(struct drm_i915_private *dev_priv, enum pipe pipe,
-		     const struct dpll *dpll);
-void vlv_force_pll_off(struct drm_i915_private *dev_priv, enum pipe pipe);
 int lpt_get_iclkip(struct drm_i915_private *dev_priv);
 bool intel_fuzzy_clock_check(int clock1, int clock2);
 
drivers/gpu/drm/i915/display/intel_dp.c +1 -0
index 0433b6394137..026b3e4d3d7d 100644
@@ -50,6 +50,7 @@
 #include "intel_dp.h"
 #include "intel_dp_link_training.h"
 #include "intel_dp_mst.h"
+#include "intel_dpll.h"
 #include "intel_dpio_phy.h"
 #include "intel_fifo_underrun.h"
 #include "intel_hdcp.h"
drivers/gpu/drm/i915/display/intel_dpll.c +509 -0

523 lines not on this page · raw message

drivers/gpu/drm/i915/display/intel_dpll.h +17 -0
index caf4615092e1..238e5463b563 100644
@@ -20,4 +20,21 @@ void vlv_compute_dpll(struct intel_crtc *crtc,
 void chv_compute_dpll(struct intel_crtc *crtc,
 		      struct intel_crtc_state *pipe_config);
 
+int vlv_force_pll_on(struct drm_i915_private *dev_priv, enum pipe pipe,
+		     const struct dpll *dpll);
+void vlv_force_pll_off(struct drm_i915_private *dev_priv, enum pipe pipe);
+void i9xx_enable_pll(struct intel_crtc *crtc,
+		     const struct intel_crtc_state *crtc_state);
+void vlv_enable_pll(struct intel_crtc *crtc,
+		    const struct intel_crtc_state *pipe_config);
+void chv_enable_pll(struct intel_crtc *crtc,
+		    const struct intel_crtc_state *pipe_config);
+void vlv_disable_pll(struct drm_i915_private *dev_priv, enum pipe pipe);
+void chv_disable_pll(struct drm_i915_private *dev_priv, enum pipe pipe);
+void i9xx_disable_pll(const struct intel_crtc_state *crtc_state);
+void vlv_prepare_pll(struct intel_crtc *crtc,
+		     const struct intel_crtc_state *pipe_config);
+void chv_prepare_pll(struct intel_crtc *crtc,
+		     const struct intel_crtc_state *pipe_config);
+
 #endif
Signature · 6 lines
2.27.0

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
author maintainer
#11 lore raw

PATCH 11/11 drm/i915: migrate i9xx plane get config

In reply to Dave Airlie

From: Dave Airlie <[email protected]>

Migrate this code out like the skylake code.

---
 drivers/gpu/drm/i915/display/i9xx_plane.c    | 119 +++++++++++++++++++
 drivers/gpu/drm/i915/display/i9xx_plane.h    |   2 +
 drivers/gpu/drm/i915/display/intel_display.c | 119 -------------------
 3 files changed, 121 insertions(+), 119 deletions(-)
drivers/gpu/drm/i915/display/i9xx_plane.c +119 -0
index 6c568079f492..a063a92f04dc 100644
@@ -698,3 +698,122 @@ intel_primary_plane_create(struct drm_i915_private *dev_priv, enum pipe pipe)
 	return ERR_PTR(ret);
 }
 
+static int i9xx_format_to_fourcc(int format)
+{
+	switch (format) {
+	case DISPPLANE_8BPP:
+		return DRM_FORMAT_C8;
+	case DISPPLANE_BGRA555:
+		return DRM_FORMAT_ARGB1555;
+	case DISPPLANE_BGRX555:
+		return DRM_FORMAT_XRGB1555;
+	case DISPPLANE_BGRX565:
+		return DRM_FORMAT_RGB565;
+	default:
+	case DISPPLANE_BGRX888:
+		return DRM_FORMAT_XRGB8888;
+	case DISPPLANE_RGBX888:
+		return DRM_FORMAT_XBGR8888;
+	case DISPPLANE_BGRA888:
+		return DRM_FORMAT_ARGB8888;
+	case DISPPLANE_RGBA888:
+		return DRM_FORMAT_ABGR8888;
+	case DISPPLANE_BGRX101010:
+		return DRM_FORMAT_XRGB2101010;
+	case DISPPLANE_RGBX101010:
+		return DRM_FORMAT_XBGR2101010;
+	case DISPPLANE_BGRA101010:
+		return DRM_FORMAT_ARGB2101010;
+	case DISPPLANE_RGBA101010:
+		return DRM_FORMAT_ABGR2101010;
+	case DISPPLANE_RGBX161616:
+		return DRM_FORMAT_XBGR16161616F;
+	}
+}
+
+void
+i9xx_get_initial_plane_config(struct intel_crtc *crtc,
+			      struct intel_initial_plane_config *plane_config)
+{
+	struct drm_device *dev = crtc->base.dev;
+	struct drm_i915_private *dev_priv = to_i915(dev);
+	struct intel_plane *plane = to_intel_plane(crtc->base.primary);
+	enum i9xx_plane_id i9xx_plane = plane->i9xx_plane;
+	enum pipe pipe;
+	u32 val, base, offset;
+	int fourcc, pixel_format;
+	unsigned int aligned_height;
+	struct drm_framebuffer *fb;
+	struct intel_framebuffer *intel_fb;
+
+	if (!plane->get_hw_state(plane, &pipe))
+		return;
+
+	drm_WARN_ON(dev, pipe != crtc->pipe);
+
+	intel_fb = kzalloc(sizeof(*intel_fb), GFP_KERNEL);
+	if (!intel_fb) {
+		drm_dbg_kms(&dev_priv->drm, "failed to alloc fb\n");
+		return;
+	}
+
+	fb = &intel_fb->base;
+
+	fb->dev = dev;
+
+	val = intel_de_read(dev_priv, DSPCNTR(i9xx_plane));
+
+	if (INTEL_GEN(dev_priv) >= 4) {
+		if (val & DISPPLANE_TILED) {
+			plane_config->tiling = I915_TILING_X;
+			fb->modifier = I915_FORMAT_MOD_X_TILED;
+		}
+
+		if (val & DISPPLANE_ROTATE_180)
+			plane_config->rotation = DRM_MODE_ROTATE_180;
+	}
+
+	if (IS_CHERRYVIEW(dev_priv) && pipe == PIPE_B &&
+	    val & DISPPLANE_MIRROR)
+		plane_config->rotation |= DRM_MODE_REFLECT_X;
+
+	pixel_format = val & DISPPLANE_PIXFORMAT_MASK;
+	fourcc = i9xx_format_to_fourcc(pixel_format);
+	fb->format = drm_format_info(fourcc);
+
+	if (IS_HASWELL(dev_priv) || IS_BROADWELL(dev_priv)) {
+		offset = intel_de_read(dev_priv, DSPOFFSET(i9xx_plane));
+		base = intel_de_read(dev_priv, DSPSURF(i9xx_plane)) & 0xfffff000;
+	} else if (INTEL_GEN(dev_priv) >= 4) {
+		if (plane_config->tiling)
+			offset = intel_de_read(dev_priv,
+					       DSPTILEOFF(i9xx_plane));
+		else
+			offset = intel_de_read(dev_priv,
+					       DSPLINOFF(i9xx_plane));
+		base = intel_de_read(dev_priv, DSPSURF(i9xx_plane)) & 0xfffff000;
+	} else {
+		base = intel_de_read(dev_priv, DSPADDR(i9xx_plane));
+	}
+	plane_config->base = base;
+
+	val = intel_de_read(dev_priv, PIPESRC(pipe));
+	fb->width = ((val >> 16) & 0xfff) + 1;
+	fb->height = ((val >> 0) & 0xfff) + 1;
+
+	val = intel_de_read(dev_priv, DSPSTRIDE(i9xx_plane));
+	fb->pitches[0] = val & 0xffffffc0;
+
+	aligned_height = intel_fb_align_height(fb, 0, fb->height);
+
+	plane_config->size = fb->pitches[0] * aligned_height;
+
+	drm_dbg_kms(&dev_priv->drm,
+		    "%s/%s with fb: size=%dx%d@%d, offset=%x, pitch %d, size 0x%x\n",
+		    crtc->base.name, plane->base.name, fb->width, fb->height,
+		    fb->format->cpp[0] * 8, base, fb->pitches[0],
+		    plane_config->size);
+
+	plane_config->fb = intel_fb;
+}
+
drivers/gpu/drm/i915/display/i9xx_plane.h +2 -0
index bc2834a62735..dff9599733b7 100644
@@ -21,4 +21,6 @@ int i9xx_check_plane_surface(struct intel_plane_state *plane_state);
 struct intel_plane *
 intel_primary_plane_create(struct drm_i915_private *dev_priv, enum pipe pipe);
 
+void i9xx_get_initial_plane_config(struct intel_crtc *crtc,
+				   struct intel_initial_plane_config *plane_config);
 #endif
drivers/gpu/drm/i915/display/intel_display.c +0 -119

131 lines not on this page · raw message

Signature · 6 lines
2.27.0

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#12 lore raw

[Intel-gfx] ✗ Fi.CI.BUILD: failure for series starting with [01/11] drm/i915: refactor some crtc code out of intel display. (v2)

In reply to Dave Airlie
== Series Details ==

== Series Details ==

Series: series starting with [01/11] drm/i915: refactor some crtc code out of intel display. (v2)
URL : https://patchwork.freedesktop.org/series/85846/
State : failure

== Summary ==

Applying: drm/i915: refactor some crtc code out of intel display. (v2)
Applying: drm/i915: refactor pll code out into intel_dpll.c
Applying: drm/i915: split fdi code out from intel_display.c
Applying: drm/i915: refactor ddi translations into a separate file
Applying: drm/i915: migrate hsw fdi code to new file.
Applying: drm/i915: migrate skl planes code new file (v3)
error: sha1 information is lacking or useless (drivers/gpu/drm/i915/Makefile).
error: could not build fake ancestor
hint: Use 'git am --show-current-patch=diff' to see the failed patch Patch failed at 0006 drm/i915: migrate skl planes code new file (v3) When you have resolved this problem, run "git am --continue".
If you prefer to skip this patch, run "git am --skip" instead.
To restore the original branch and stop patching, run "git am --abort".

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

maintainer
#13 lore raw

Re: [Intel-gfx] ✗ Fi.CI.BUILD: failure for series starting with [01/11] drm/i915: refactor some crtc code out of intel display. (v2)

Quoted 8 lines · Patchwork

== Series Details ==

Series: series starting with [01/11] drm/i915: refactor some crtc code out of intel display. (v2)
URL : https://patchwork.freedesktop.org/series/85846/
State : failure

== Summary ==

Quoted 13 lines

Applying: drm/i915: refactor some crtc code out of intel display. (v2)
Applying: drm/i915: refactor pll code out into intel_dpll.c
Applying: drm/i915: split fdi code out from intel_display.c
Applying: drm/i915: refactor ddi translations into a separate file
Applying: drm/i915: migrate hsw fdi code to new file.
Applying: drm/i915: migrate skl planes code new file (v3)
error: sha1 information is lacking or useless (drivers/gpu/drm/i915/Makefile).
error: could not build fake ancestor
hint: Use 'git am --show-current-patch=diff' to see the failed patch Patch failed at 0006 drm/i915: migrate skl planes code new file (v3) When you have resolved this problem, run "git am --continue".
If you prefer to skip this patch, run "git am --skip" instead.
To restore the original branch and stop patching, run "git am --abort".

My bad, just pushed some stuff that conflicted, I rebased and resent the
series: https://patchwork.freedesktop.org/series/85867/

BR,
Jani.

Quoted 6 lines

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

Signature · 5 lines
Jani Nikula, Intel Open Source Graphics Center
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx