Skip to contentSkip to conversation

Configuring congestion watermarks on ocelot switch using devlink-sb

PATCH Superseded Vladimir Oltean 2 participants 12 messages Jan 14, 2021 – Jan 15, 2021

Subsystems (4)

v5 of 6 Superseded Latest is v6 →

lore
Share & tools
lore

Vladimir Oltean

author maintainer
#0 lore raw

v5 cover Configuring congestion watermarks on ocelot switch using devlink-sb

In some applications, it is important to create resource reservations in the Ethernet switches, to prevent background traffic, or deliberate attacks, from inducing denial of service into the high-priority traffic.

These patches give the user some knobs to turn. The ocelot switches support per-port and per-port-tc reservations, on ingress and on egress. The resources that are monitored are packet buffers (in cells of 60 bytes each) and frame references.

The frames that exceed the reservations can optionally consume from sharing watermarks which are not per-port but global across the switch. There are 10 sharing watermarks, 8 of them are per traffic class and 2 are per drop priority.

I am configuring the hardware using the best of my knowledge, and mostly through trial and error. Same goes for devlink-sb integration. Feedback is welcome.

Vladimir Oltean (10):
net: mscc: ocelot: auto-detect packet buffer size and number of frame
references
net: mscc: ocelot: add ops for decoding watermark threshold and
occupancy
net: dsa: add ops for devlink-sb
net: dsa: felix: reindent struct dsa_switch_ops
net: dsa: felix: perform teardown in reverse order of setup
net: mscc: ocelot: export NUM_TC constant from felix to common switch
lib
net: mscc: ocelot: delete unused ocelot_set_cpu_port prototype
net: mscc: ocelot: register devlink ports
net: mscc: ocelot: initialize watermarks to sane defaults
net: mscc: ocelot: configure watermarks using devlink-sb

 drivers/net/dsa/ocelot/felix.c             | 205 ++++-
 drivers/net/dsa/ocelot/felix.h             |   2 -
 drivers/net/dsa/ocelot/felix_vsc9959.c     |  23 +-
 drivers/net/dsa/ocelot/seville_vsc9953.c   |  20 +-
 drivers/net/ethernet/mscc/Makefile         |   3 +-
 drivers/net/ethernet/mscc/ocelot.c         |  18 +-
 drivers/net/ethernet/mscc/ocelot.h         |   9 +-
 drivers/net/ethernet/mscc/ocelot_devlink.c | 885 +++++++++++++++++++++
 drivers/net/ethernet/mscc/ocelot_net.c     | 206 ++++-
 drivers/net/ethernet/mscc/ocelot_vsc7514.c | 146 +++-
 include/net/dsa.h                          |  34 +
 include/soc/mscc/ocelot.h                  |  55 +-
 include/soc/mscc/ocelot_qsys.h             |   7 +-
 net/dsa/dsa2.c                             | 159 +++-
 14 files changed, 1664 insertions(+), 108 deletions(-)
 create mode 100644 drivers/net/ethernet/mscc/ocelot_devlink.c
Signature · 1 line
2.25.1
author maintainer
#1 lore raw

PATCH v5 1/10 net: mscc: ocelot: auto-detect packet buffer size and number of frame references

From: Vladimir Oltean <[email protected]>

Instead of reading these values from the reference manual and writing them down into the driver, it appears that the hardware gives us the option of detecting them dynamically.

The number of frame references corresponds to what the reference manual notes, however it seems that the frame buffers are reported as slightly less than the books would indicate. On VSC9959 (Felix), the books say it should have 128KB of packet buffer, but the registers indicate only 129840 bytes (126.79 KB). Also, the unit of measurement for FREECNT from the documentation of all these devices is incorrect (taken from an older generation). This was confirmed by Younes Leroul from Microchip support.

Not having anything better to do with these values at the moment* (this will change soon), let's just print them.

*The frame buffer size is, in fact, used to calculate the tail dropping watermarks.

---
Changes in v5:
None.

Changes in v4:
None.

Changes in v3:
None.

Changes in v2:
- Fixed FREECNT multiplier after consulting with Microchip support.

 drivers/net/dsa/ocelot/felix.c             |  1 -
 drivers/net/dsa/ocelot/felix.h             |  1 -
 drivers/net/dsa/ocelot/felix_vsc9959.c     |  1 -
 drivers/net/dsa/ocelot/seville_vsc9953.c   |  1 -
 drivers/net/ethernet/mscc/ocelot.c         | 22 +++++++++++++++++++++-
 drivers/net/ethernet/mscc/ocelot_vsc7514.c |  1 -
 include/soc/mscc/ocelot.h                  |  3 ++-
 include/soc/mscc/ocelot_qsys.h             |  3 +++
 8 files changed, 26 insertions(+), 7 deletions(-)
drivers/net/dsa/ocelot/felix.c +0 -1
index 768a74dc462a..be5c417f39b8 100644
@@ -422,7 +422,6 @@ static int felix_init_structs(struct felix *felix, int num_phys_ports)
 	ocelot->map		= felix->info->map;
 	ocelot->stats_layout	= felix->info->stats_layout;
 	ocelot->num_stats	= felix->info->num_stats;
-	ocelot->shared_queue_sz	= felix->info->shared_queue_sz;
 	ocelot->num_mact_rows	= felix->info->num_mact_rows;
 	ocelot->vcap		= felix->info->vcap;
 	ocelot->ops		= felix->info->ops;
drivers/net/dsa/ocelot/felix.h +0 -1
index 4c717324ac2f..5434fe278d2c 100644
@@ -15,7 +15,6 @@ struct felix_info {
 	const struct reg_field		*regfields;
 	const u32 *const		*map;
 	const struct ocelot_ops		*ops;
-	int				shared_queue_sz;
 	int				num_mact_rows;
 	const struct ocelot_stat_layout	*stats_layout;
 	unsigned int			num_stats;
drivers/net/dsa/ocelot/felix_vsc9959.c +0 -1
index a87597eef8cf..b68df85e01a1 100644
@@ -1356,7 +1356,6 @@ static const struct felix_info felix_info_vsc9959 = {
 	.stats_layout		= vsc9959_stats_layout,
 	.num_stats		= ARRAY_SIZE(vsc9959_stats_layout),
 	.vcap			= vsc9959_vcap_props,
-	.shared_queue_sz	= 128 * 1024,
 	.num_mact_rows		= 2048,
 	.num_ports		= 6,
 	.num_tx_queues		= FELIX_NUM_TC,
drivers/net/dsa/ocelot/seville_vsc9953.c +0 -1
index ebbaf6817ec8..b72813da6d9f 100644
@@ -1181,7 +1181,6 @@ static const struct felix_info seville_info_vsc9953 = {
 	.stats_layout		= vsc9953_stats_layout,
 	.num_stats		= ARRAY_SIZE(vsc9953_stats_layout),
 	.vcap			= vsc9953_vcap_props,
-	.shared_queue_sz	= 256 * 1024,
 	.num_mact_rows		= 2048,
 	.num_ports		= 10,
 	.mdio_bus_alloc		= vsc9953_mdio_bus_alloc,
drivers/net/ethernet/mscc/ocelot.c +21 -1
index af620f7ce469..3af8e607c8a9 100644
@@ -1354,7 +1354,7 @@ void ocelot_port_set_maxlen(struct ocelot *ocelot, int port, size_t sdu)
 			    pause_stop);
 
 	/* Tail dropping watermarks */
-	atop_tot = (ocelot->shared_queue_sz - 9 * maxlen) /
+	atop_tot = (ocelot->packet_buffer_size - 9 * maxlen) /
 		   OCELOT_BUFFER_CELL_SZ;
 	atop = (9 * maxlen) / OCELOT_BUFFER_CELL_SZ;
 	ocelot_write_rix(ocelot, ocelot->ops->wm_enc(atop), SYS_ATOP, port);
@@ -1467,6 +1467,25 @@ static void ocelot_cpu_port_init(struct ocelot *ocelot)
 			 ANA_PORT_VLAN_CFG, cpu);
 }
 
+static void ocelot_detect_features(struct ocelot *ocelot)
+{
+	int mmgt, eq_ctrl;
+
+	/* For Ocelot, Felix, Seville, Serval etc, SYS:MMGT:MMGT:FREECNT holds
+	 * the number of 240-byte free memory words (aka 4-cell chunks) and not
+	 * 192 bytes as the documentation incorrectly says.
+	 */
+	mmgt = ocelot_read(ocelot, SYS_MMGT);
+	ocelot->packet_buffer_size = 240 * SYS_MMGT_FREECNT(mmgt);
+
+	eq_ctrl = ocelot_read(ocelot, QSYS_EQ_CTRL);
+	ocelot->num_frame_refs = QSYS_MMGT_EQ_CTRL_FP_FREE_CNT(eq_ctrl);
+
+	dev_info(ocelot->dev,
+		 "Detected %d bytes of packet buffer and %d frame references\n",
+		 ocelot->packet_buffer_size, ocelot->num_frame_refs);
+}
+
 int ocelot_init(struct ocelot *ocelot)
 {
 	char queue_name[32];
@@ -1509,6 +1528,7 @@ int ocelot_init(struct ocelot *ocelot)
 
 	INIT_LIST_HEAD(&ocelot->multicast);
 	INIT_LIST_HEAD(&ocelot->pgids);
+	ocelot_detect_features(ocelot);
 	ocelot_mact_init(ocelot);
 	ocelot_vlan_init(ocelot);
 	ocelot_vcap_init(ocelot);
drivers/net/ethernet/mscc/ocelot_vsc7514.c +0 -1
index 9cf2bc5f4289..7135ad18affe 100644
@@ -517,7 +517,6 @@ static int ocelot_chip_init(struct ocelot *ocelot, const struct ocelot_ops *ops)
 	ocelot->map = ocelot_regmap;
 	ocelot->stats_layout = ocelot_stats_layout;
 	ocelot->num_stats = ARRAY_SIZE(ocelot_stats_layout);
-	ocelot->shared_queue_sz = 224 * 1024;
 	ocelot->num_mact_rows = 1024;
 	ocelot->ops = ops;
 
include/soc/mscc/ocelot.h +2 -1
index f3db75c0172b..c17a372335cd 100644
@@ -607,7 +607,8 @@ struct ocelot {
 	const struct ocelot_stat_layout	*stats_layout;
 	unsigned int			num_stats;
 
-	int				shared_queue_sz;
+	int				packet_buffer_size;
+	int				num_frame_refs;
 	int				num_mact_rows;
 
 	struct net_device		*hw_bridge_dev;
include/soc/mscc/ocelot_qsys.h +3 -0
index a814bc2017d8..b7b263a19068 100644
@@ -77,6 +77,9 @@
 #define QSYS_RES_STAT_MAXUSE(x)                           ((x) & GENMASK(11, 0))
 #define QSYS_RES_STAT_MAXUSE_M                            GENMASK(11, 0)
 
+#define QSYS_MMGT_EQ_CTRL_FP_FREE_CNT(x)                  ((x) & GENMASK(15, 0))
+#define QSYS_MMGT_EQ_CTRL_FP_FREE_CNT_M                   GENMASK(15, 0)
+
 #define QSYS_EVENTS_CORE_EV_FDC(x)                        (((x) << 2) & GENMASK(4, 2))
 #define QSYS_EVENTS_CORE_EV_FDC_M                         GENMASK(4, 2)
 #define QSYS_EVENTS_CORE_EV_FDC_X(x)                      (((x) & GENMASK(4, 2)) >> 2)
Signature · 1 line
2.25.1
author maintainer
#2 lore raw

PATCH v5 2/10 net: mscc: ocelot: add ops for decoding watermark threshold and occupancy

In reply to Vladimir Oltean

From: Vladimir Oltean <[email protected]>

We'll need to read back the watermark thresholds and occupancy from hardware (for devlink-sb integration), not only to write them as we did so far in ocelot_port_set_maxlen. So introduce 2 new functions in struct ocelot_ops, similar to wm_enc, and implement them for the 3 supported mscc_ocelot switches.

Remove the INUSE and MAXUSE unpacking helpers for the QSYS_RES_STAT register, because that doesn't scale with the number of switches that mscc_ocelot supports now. They have different bit widths for the watermarks, and we need function pointers to abstract that difference away.

---
Changes in v5:
None.

Changes in v4:
None.

Changes in v3:
None.

Changes in v2:
None.

 drivers/net/dsa/ocelot/felix_vsc9959.c     | 18 ++++++++++++++++++
 drivers/net/dsa/ocelot/seville_vsc9953.c   | 18 ++++++++++++++++++
 drivers/net/ethernet/mscc/ocelot_vsc7514.c | 16 ++++++++++++++++
 include/soc/mscc/ocelot.h                  |  2 ++
 include/soc/mscc/ocelot_qsys.h             |  6 ------
 5 files changed, 54 insertions(+), 6 deletions(-)
drivers/net/dsa/ocelot/felix_vsc9959.c +18 -0
index b68df85e01a1..21dacb85976e 100644
@@ -1006,9 +1006,27 @@ static u16 vsc9959_wm_enc(u16 value)
 	return value;
 }
 
+static u16 vsc9959_wm_dec(u16 wm)
+{
+	WARN_ON(wm & ~GENMASK(8, 0));
+
+	if (wm & BIT(8))
+		return (wm & GENMASK(7, 0)) * 16;
+
+	return wm;
+}
+
+static void vsc9959_wm_stat(u32 val, u32 *inuse, u32 *maxuse)
+{
+	*inuse = (val & GENMASK(23, 12)) >> 12;
+	*maxuse = val & GENMASK(11, 0);
+}
+
 static const struct ocelot_ops vsc9959_ops = {
 	.reset			= vsc9959_reset,
 	.wm_enc			= vsc9959_wm_enc,
+	.wm_dec			= vsc9959_wm_dec,
+	.wm_stat		= vsc9959_wm_stat,
 	.port_to_netdev		= felix_port_to_netdev,
 	.netdev_to_port		= felix_netdev_to_port,
 };
drivers/net/dsa/ocelot/seville_vsc9953.c +18 -0
index b72813da6d9f..8dad0c894eca 100644
@@ -1057,9 +1057,27 @@ static u16 vsc9953_wm_enc(u16 value)
 	return value;
 }
 
+static u16 vsc9953_wm_dec(u16 wm)
+{
+	WARN_ON(wm & ~GENMASK(9, 0));
+
+	if (wm & BIT(9))
+		return (wm & GENMASK(8, 0)) * 16;
+
+	return wm;
+}
+
+static void vsc9953_wm_stat(u32 val, u32 *inuse, u32 *maxuse)
+{
+	*inuse = (val & GENMASK(25, 13)) >> 13;
+	*maxuse = val & GENMASK(12, 0);
+}
+
 static const struct ocelot_ops vsc9953_ops = {
 	.reset			= vsc9953_reset,
 	.wm_enc			= vsc9953_wm_enc,
+	.wm_dec			= vsc9953_wm_dec,
+	.wm_stat		= vsc9953_wm_stat,
 	.port_to_netdev		= felix_port_to_netdev,
 	.netdev_to_port		= felix_netdev_to_port,
 };
drivers/net/ethernet/mscc/ocelot_vsc7514.c +16 -0
index 7135ad18affe..ecd474476cc6 100644
@@ -763,9 +763,25 @@ static u16 ocelot_wm_enc(u16 value)
 	return value;
 }
 
+static u16 ocelot_wm_dec(u16 wm)
+{
+	if (wm & BIT(8))
+		return (wm & GENMASK(7, 0)) * 16;
+
+	return wm;
+}
+
+static void ocelot_wm_stat(u32 val, u32 *inuse, u32 *maxuse)
+{
+	*inuse = (val & GENMASK(23, 12)) >> 12;
+	*maxuse = val & GENMASK(11, 0);
+}
+
 static const struct ocelot_ops ocelot_ops = {
 	.reset			= ocelot_reset,
 	.wm_enc			= ocelot_wm_enc,
+	.wm_dec			= ocelot_wm_dec,
+	.wm_stat		= ocelot_wm_stat,
 	.port_to_netdev		= ocelot_port_to_netdev,
 	.netdev_to_port		= ocelot_netdev_to_port,
 };
include/soc/mscc/ocelot.h +2 -0
index c17a372335cd..e548b0f51d0c 100644
@@ -563,6 +563,8 @@ struct ocelot_ops {
 	int (*netdev_to_port)(struct net_device *dev);
 	int (*reset)(struct ocelot *ocelot);
 	u16 (*wm_enc)(u16 value);
+	u16 (*wm_dec)(u16 value);
+	void (*wm_stat)(u32 val, u32 *inuse, u32 *maxuse);
 };
 
 struct ocelot_vcap_block {
include/soc/mscc/ocelot_qsys.h +0 -6
index b7b263a19068..9731895be643 100644
@@ -71,12 +71,6 @@
 
 #define QSYS_RES_STAT_GSZ                                 0x8
 
-#define QSYS_RES_STAT_INUSE(x)                            (((x) << 12) & GENMASK(23, 12))
-#define QSYS_RES_STAT_INUSE_M                             GENMASK(23, 12)
-#define QSYS_RES_STAT_INUSE_X(x)                          (((x) & GENMASK(23, 12)) >> 12)
-#define QSYS_RES_STAT_MAXUSE(x)                           ((x) & GENMASK(11, 0))
-#define QSYS_RES_STAT_MAXUSE_M                            GENMASK(11, 0)
-
 #define QSYS_MMGT_EQ_CTRL_FP_FREE_CNT(x)                  ((x) & GENMASK(15, 0))
 #define QSYS_MMGT_EQ_CTRL_FP_FREE_CNT_M                   GENMASK(15, 0)
 
Signature · 1 line
2.25.1
author maintainer
#3 lore raw

PATCH v5 3/10 net: dsa: add ops for devlink-sb

In reply to Vladimir Oltean

From: Vladimir Oltean <[email protected]>

Switches that care about QoS might have hardware support for reserving buffer pools for individual ports or traffic classes, and configuring their sizes and thresholds. Through devlink-sb (shared buffers), this is all configurable, as well as their occupancy being viewable.

Add the plumbing in DSA for these operations.

Individual drivers still need to call devlink_sb_register() with the shared buffers they want to expose. A helper was not created in DSA for this purpose (unlike, say, dsa_devlink_params_register), since in my opinion it does not bring any benefit over plainly calling devlink_sb_register() directly.

---
Changes in v5:
None.

Changes in v4:
None.

Changes in v3:
Use the helpers added by Andrew to convert from devlink and devlink_port to DSA structures rather than open-coding them.

Changes in v2:
None.

 include/net/dsa.h |  34 ++++++++++
 net/dsa/dsa2.c    | 159 +++++++++++++++++++++++++++++++++++++++++++++-
 2 files changed, 192 insertions(+), 1 deletion(-)
include/net/dsa.h +34 -0
index c3485ba6c312..7bf8b0432971 100644
@@ -647,6 +647,40 @@ struct dsa_switch_ops {
 	int	(*devlink_info_get)(struct dsa_switch *ds,
 				    struct devlink_info_req *req,
 				    struct netlink_ext_ack *extack);
+	int	(*devlink_sb_pool_get)(struct dsa_switch *ds,
+				       unsigned int sb_index, u16 pool_index,
+				       struct devlink_sb_pool_info *pool_info);
+	int	(*devlink_sb_pool_set)(struct dsa_switch *ds, unsigned int sb_index,
+				       u16 pool_index, u32 size,
+				       enum devlink_sb_threshold_type threshold_type,
+				       struct netlink_ext_ack *extack);
+	int	(*devlink_sb_port_pool_get)(struct dsa_switch *ds, int port,
+					    unsigned int sb_index, u16 pool_index,
+					    u32 *p_threshold);
+	int	(*devlink_sb_port_pool_set)(struct dsa_switch *ds, int port,
+					    unsigned int sb_index, u16 pool_index,
+					    u32 threshold,
+					    struct netlink_ext_ack *extack);
+	int	(*devlink_sb_tc_pool_bind_get)(struct dsa_switch *ds, int port,
+					       unsigned int sb_index, u16 tc_index,
+					       enum devlink_sb_pool_type pool_type,
+					       u16 *p_pool_index, u32 *p_threshold);
+	int	(*devlink_sb_tc_pool_bind_set)(struct dsa_switch *ds, int port,
+					       unsigned int sb_index, u16 tc_index,
+					       enum devlink_sb_pool_type pool_type,
+					       u16 pool_index, u32 threshold,
+					       struct netlink_ext_ack *extack);
+	int	(*devlink_sb_occ_snapshot)(struct dsa_switch *ds,
+					   unsigned int sb_index);
+	int	(*devlink_sb_occ_max_clear)(struct dsa_switch *ds,
+					    unsigned int sb_index);
+	int	(*devlink_sb_occ_port_pool_get)(struct dsa_switch *ds, int port,
+						unsigned int sb_index, u16 pool_index,
+						u32 *p_cur, u32 *p_max);
+	int	(*devlink_sb_occ_tc_port_bind_get)(struct dsa_switch *ds, int port,
+						   unsigned int sb_index, u16 tc_index,
+						   enum devlink_sb_pool_type pool_type,
+						   u32 *p_cur, u32 *p_max);
 
 	/*
 	 * MTU change functionality. Switches can also adjust their MRU through
net/dsa/dsa2.c +158 -1

166 lines not on this page · raw message

Signature · 1 line
2.25.1
author maintainer
#4 lore raw

PATCH v5 4/10 net: dsa: felix: reindent struct dsa_switch_ops

In reply to Vladimir Oltean

From: Vladimir Oltean <[email protected]>

The devlink function pointer names are super long, and they would break the alignment. So reindent the existing ops now by adding one tab.

---
Changes in v5:
Rebase on top of recent series d1c8b6a3dd77 ("Merge branch 'get-rid-of-the-switchdev-transactional-model'") which got rid of .port_mdb_prepare and .port_vlan_prepare.

Changes in v4:
None.

Changes in v3:
None.

Changes in v2:
None.

 drivers/net/dsa/ocelot/felix.c | 74 +++++++++++++++++-----------------
 1 file changed, 37 insertions(+), 37 deletions(-)
drivers/net/dsa/ocelot/felix.c +37 -37
index be5c417f39b8..532e038e8012 100644
@@ -752,43 +752,43 @@ static int felix_port_setup_tc(struct dsa_switch *ds, int port,
 }
 
 const struct dsa_switch_ops felix_switch_ops = {
-	.get_tag_protocol	= felix_get_tag_protocol,
-	.setup			= felix_setup,
-	.teardown		= felix_teardown,
-	.set_ageing_time	= felix_set_ageing_time,
-	.get_strings		= felix_get_strings,
-	.get_ethtool_stats	= felix_get_ethtool_stats,
-	.get_sset_count		= felix_get_sset_count,
-	.get_ts_info		= felix_get_ts_info,
-	.phylink_validate	= felix_phylink_validate,
-	.phylink_mac_config	= felix_phylink_mac_config,
-	.phylink_mac_link_down	= felix_phylink_mac_link_down,
-	.phylink_mac_link_up	= felix_phylink_mac_link_up,
-	.port_enable		= felix_port_enable,
-	.port_disable		= felix_port_disable,
-	.port_fdb_dump		= felix_fdb_dump,
-	.port_fdb_add		= felix_fdb_add,
-	.port_fdb_del		= felix_fdb_del,
-	.port_mdb_add		= felix_mdb_add,
-	.port_mdb_del		= felix_mdb_del,
-	.port_bridge_join	= felix_bridge_join,
-	.port_bridge_leave	= felix_bridge_leave,
-	.port_stp_state_set	= felix_bridge_stp_state_set,
-	.port_vlan_filtering	= felix_vlan_filtering,
-	.port_vlan_add		= felix_vlan_add,
-	.port_vlan_del		= felix_vlan_del,
-	.port_hwtstamp_get	= felix_hwtstamp_get,
-	.port_hwtstamp_set	= felix_hwtstamp_set,
-	.port_rxtstamp		= felix_rxtstamp,
-	.port_txtstamp		= felix_txtstamp,
-	.port_change_mtu	= felix_change_mtu,
-	.port_max_mtu		= felix_get_max_mtu,
-	.port_policer_add	= felix_port_policer_add,
-	.port_policer_del	= felix_port_policer_del,
-	.cls_flower_add		= felix_cls_flower_add,
-	.cls_flower_del		= felix_cls_flower_del,
-	.cls_flower_stats	= felix_cls_flower_stats,
-	.port_setup_tc		= felix_port_setup_tc,
+	.get_tag_protocol		= felix_get_tag_protocol,
+	.setup				= felix_setup,
+	.teardown			= felix_teardown,
+	.set_ageing_time		= felix_set_ageing_time,
+	.get_strings			= felix_get_strings,
+	.get_ethtool_stats		= felix_get_ethtool_stats,
+	.get_sset_count			= felix_get_sset_count,
+	.get_ts_info			= felix_get_ts_info,
+	.phylink_validate		= felix_phylink_validate,
+	.phylink_mac_config		= felix_phylink_mac_config,
+	.phylink_mac_link_down		= felix_phylink_mac_link_down,
+	.phylink_mac_link_up		= felix_phylink_mac_link_up,
+	.port_enable			= felix_port_enable,
+	.port_disable			= felix_port_disable,
+	.port_fdb_dump			= felix_fdb_dump,
+	.port_fdb_add			= felix_fdb_add,
+	.port_fdb_del			= felix_fdb_del,
+	.port_mdb_add			= felix_mdb_add,
+	.port_mdb_del			= felix_mdb_del,
+	.port_bridge_join		= felix_bridge_join,
+	.port_bridge_leave		= felix_bridge_leave,
+	.port_stp_state_set		= felix_bridge_stp_state_set,
+	.port_vlan_filtering		= felix_vlan_filtering,
+	.port_vlan_add			= felix_vlan_add,
+	.port_vlan_del			= felix_vlan_del,
+	.port_hwtstamp_get		= felix_hwtstamp_get,
+	.port_hwtstamp_set		= felix_hwtstamp_set,
+	.port_rxtstamp			= felix_rxtstamp,
+	.port_txtstamp			= felix_txtstamp,
+	.port_change_mtu		= felix_change_mtu,
+	.port_max_mtu			= felix_get_max_mtu,
+	.port_policer_add		= felix_port_policer_add,
+	.port_policer_del		= felix_port_policer_del,
+	.cls_flower_add			= felix_cls_flower_add,
+	.cls_flower_del			= felix_cls_flower_del,
+	.cls_flower_stats		= felix_cls_flower_stats,
+	.port_setup_tc			= felix_port_setup_tc,
 };
 
 struct net_device *felix_port_to_netdev(struct ocelot *ocelot, int port)
Signature · 1 line
2.25.1
author maintainer
#5 lore raw

PATCH v5 5/10 net: dsa: felix: perform teardown in reverse order of setup

In reply to Vladimir Oltean

From: Vladimir Oltean <[email protected]>

In general it is desirable that cleanup is the reverse process of setup. In this case I am not seeing any particular issue, but with the introduction of devlink-sb for felix, a non-obvious decision had to be made as to where to put its cleanup method. When there's a convention in place, that decision becomes obvious.

---
Changes in v5:
None.

Changes in v4:
Removed the unnecessary if condition.

Changes in v3:
None.

Changes in v2:
None.

 drivers/net/dsa/ocelot/felix.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)
drivers/net/dsa/ocelot/felix.c +5 -5
index 532e038e8012..3ec06bdd175a 100644
@@ -610,14 +610,14 @@ static void felix_teardown(struct dsa_switch *ds)
 	struct felix *felix = ocelot_to_felix(ocelot);
 	int port;
 
-	if (felix->info->mdio_bus_free)
-		felix->info->mdio_bus_free(ocelot);
+	ocelot_deinit_timestamp(ocelot);
+	ocelot_deinit(ocelot);
 
 	for (port = 0; port < ocelot->num_phys_ports; port++)
 		ocelot_deinit_port(ocelot, port);
-	ocelot_deinit_timestamp(ocelot);
-	/* stop workqueue thread */
-	ocelot_deinit(ocelot);
+
+	if (felix->info->mdio_bus_free)
+		felix->info->mdio_bus_free(ocelot);
 }
 
 static int felix_hwtstamp_get(struct dsa_switch *ds, int port,
Signature · 1 line
2.25.1
author maintainer
#6 lore raw

PATCH v5 6/10 net: mscc: ocelot: export NUM_TC constant from felix to common switch lib

In reply to Vladimir Oltean

From: Vladimir Oltean <[email protected]>

We should be moving anything that isn't DSA-specific or SoC-specific out of the felix DSA driver, and into the common mscc_ocelot switch library.

The number of traffic classes is one of the aspects that is common between all ocelot switches, so it belongs in the library.

This patch also makes seville use 8 TX queues, and therefore enables prioritization via the QOS_CLASS field in the NPI injection header.

---
Changes in v5:
None.

Changes in v4:
None.

Changes in v3:
None.

Changes in v2:
Rebased on top of commit edd2410b165e ("net: mscc: ocelot: fix dropping of unknown IPv4 multicast on Seville").

 drivers/net/dsa/ocelot/felix.c           | 2 +-
 drivers/net/dsa/ocelot/felix.h           | 1 -
 drivers/net/dsa/ocelot/felix_vsc9959.c   | 4 ++--
 drivers/net/dsa/ocelot/seville_vsc9953.c | 1 +
 include/soc/mscc/ocelot.h                | 1 +
 5 files changed, 5 insertions(+), 4 deletions(-)
drivers/net/dsa/ocelot/felix.c +1 -1
index 3ec06bdd175a..6c584496abc6 100644
@@ -299,7 +299,7 @@ static void felix_port_qos_map_init(struct ocelot *ocelot, int port)
 		       ANA_PORT_QOS_CFG,
 		       port);
 
-	for (i = 0; i < FELIX_NUM_TC * 2; i++) {
+	for (i = 0; i < OCELOT_NUM_TC * 2; i++) {
 		ocelot_rmw_ix(ocelot,
 			      (ANA_PORT_PCP_DEI_MAP_DP_PCP_DEI_VAL & i) |
 			      ANA_PORT_PCP_DEI_MAP_QOS_PCP_DEI_VAL(i),
drivers/net/dsa/ocelot/felix.h +0 -1
index 5434fe278d2c..994835cb9307 100644
@@ -5,7 +5,6 @@
 #define _MSCC_FELIX_H
 
 #define ocelot_to_felix(o)		container_of((o), struct felix, ocelot)
-#define FELIX_NUM_TC			8
 
 /* Platform-specific information */
 struct felix_info {
drivers/net/dsa/ocelot/felix_vsc9959.c +2 -2
index 21dacb85976e..f9711e69b8d5 100644
@@ -1376,7 +1376,7 @@ static const struct felix_info felix_info_vsc9959 = {
 	.vcap			= vsc9959_vcap_props,
 	.num_mact_rows		= 2048,
 	.num_ports		= 6,
-	.num_tx_queues		= FELIX_NUM_TC,
+	.num_tx_queues		= OCELOT_NUM_TC,
 	.switch_pci_bar		= 4,
 	.imdio_pci_bar		= 0,
 	.ptp_caps		= &vsc9959_ptp_caps,
@@ -1435,7 +1435,7 @@ static int felix_pci_probe(struct pci_dev *pdev,
 	pci_set_drvdata(pdev, felix);
 	ocelot = &felix->ocelot;
 	ocelot->dev = &pdev->dev;
-	ocelot->num_flooding_pgids = FELIX_NUM_TC;
+	ocelot->num_flooding_pgids = OCELOT_NUM_TC;
 	felix->info = &felix_info_vsc9959;
 	felix->switch_base = pci_resource_start(pdev,
 						felix->info->switch_pci_bar);
drivers/net/dsa/ocelot/seville_vsc9953.c +1 -0
index 8dad0c894eca..5e9bfdea50be 100644
@@ -1201,6 +1201,7 @@ static const struct felix_info seville_info_vsc9953 = {
 	.vcap			= vsc9953_vcap_props,
 	.num_mact_rows		= 2048,
 	.num_ports		= 10,
+	.num_tx_queues		= OCELOT_NUM_TC,
 	.mdio_bus_alloc		= vsc9953_mdio_bus_alloc,
 	.mdio_bus_free		= vsc9953_mdio_bus_free,
 	.phylink_validate	= vsc9953_phylink_validate,
include/soc/mscc/ocelot.h +1 -0
index e548b0f51d0c..1dc0c6d0671a 100644
@@ -98,6 +98,7 @@
 #define IFH_REW_OP_TWO_STEP_PTP		0x3
 #define IFH_REW_OP_ORIGIN_PTP		0x5
 
+#define OCELOT_NUM_TC			8
 #define OCELOT_TAG_LEN			16
 #define OCELOT_SHORT_PREFIX_LEN		4
 #define OCELOT_LONG_PREFIX_LEN		16
Signature · 1 line
2.25.1
author maintainer
#7 lore raw

PATCH v5 7/10 net: mscc: ocelot: delete unused ocelot_set_cpu_port prototype

In reply to Vladimir Oltean

From: Vladimir Oltean <[email protected]>

This is a leftover of commit 69df578c5f4b ("net: mscc: ocelot: eliminate confusion between CPU and NPI port") which renamed that function.

---
Changes in v5:
None.

Changes in v4:
None.

Changes in v3:
None.

Changes in v2:
None.

 drivers/net/ethernet/mscc/ocelot.h | 4 ----
 1 file changed, 4 deletions(-)
drivers/net/ethernet/mscc/ocelot.h +0 -4
index 291d39d49c4e..519335676c24 100644
@@ -122,10 +122,6 @@ void ocelot_port_writel(struct ocelot_port *port, u32 val, u32 reg);
 int ocelot_probe_port(struct ocelot *ocelot, int port, struct regmap *target,
 		      struct phy_device *phy);
 
-void ocelot_set_cpu_port(struct ocelot *ocelot, int cpu,
-			 enum ocelot_tag_prefix injection,
-			 enum ocelot_tag_prefix extraction);
-
 extern struct notifier_block ocelot_netdevice_nb;
 extern struct notifier_block ocelot_switchdev_nb;
 extern struct notifier_block ocelot_switchdev_blocking_nb;
Signature · 1 line
2.25.1
author maintainer
#8 lore raw

PATCH v5 8/10 net: mscc: ocelot: register devlink ports

In reply to Vladimir Oltean

From: Vladimir Oltean <[email protected]>

Add devlink integration into the mscc_ocelot switchdev driver. All physical ports (i.e. the unused ones as well) except the CPU port module at ocelot->num_phys_ports are registered with devlink, and that requires keeping the devlink_port structure outside struct ocelot_port_private, since the latter has a 1:1 mapping with a struct net_device (which does not exist for unused ports).

Since we use devlink_port_type_eth_set to link the devlink port to the net_device, we can as well remove the .ndo_get_phys_port_name and .ndo_get_port_parent_id implementations, since devlink takes care of retrieving the port name and number automatically, once .ndo_get_devlink_port is implemented.

Note that the felix DSA driver is already integrated with devlink by default, since that is a thing that the DSA core takes care of. This is the reason why these devlink stubs were put in ocelot_net.c and not in the common library. It is also the reason why ocelot::devlink is a pointer and not a full structure embedded inside struct ocelot: because the mscc_ocelot driver allocates that by itself (as the container of struct ocelot, in fact), but in the case of felix, it is DSA who allocates the devlink, and felix just propagates the pointer towards struct ocelot.

---
Changes in v5:
Use devlink_alloc to allocate ocelot->devlink, as per Jakub's suggestion.

Changes in v4:
- Register devlink ports before registering the net_devices.
- Register devlink ports for the unused ports too.
- More careful teardown path.

Changes in v3:
None.

Changes in v2:
Using devlink_port_type_eth_set as per Jiri's suggestion.

 drivers/net/ethernet/mscc/ocelot.h         |   5 +
 drivers/net/ethernet/mscc/ocelot_net.c     |  63 ++++++-----
 drivers/net/ethernet/mscc/ocelot_vsc7514.c | 121 ++++++++++++++++++---
 include/soc/mscc/ocelot.h                  |   2 +
 4 files changed, 147 insertions(+), 44 deletions(-)
drivers/net/ethernet/mscc/ocelot.h +5 -0
index 519335676c24..de4dd62ef39e 100644
@@ -121,6 +121,11 @@ void ocelot_port_writel(struct ocelot_port *port, u32 val, u32 reg);
 
 int ocelot_probe_port(struct ocelot *ocelot, int port, struct regmap *target,
 		      struct phy_device *phy);
+int ocelot_devlink_init(struct ocelot *ocelot);
+void ocelot_devlink_teardown(struct ocelot *ocelot);
+int ocelot_port_devlink_init(struct ocelot *ocelot, int port,
+			     enum devlink_port_flavour flavour);
+void ocelot_port_devlink_teardown(struct ocelot *ocelot, int port);
 
 extern struct notifier_block ocelot_netdevice_nb;
 extern struct notifier_block ocelot_switchdev_nb;
drivers/net/ethernet/mscc/ocelot_net.c +35 -28

95 lines not on this page · raw message

drivers/net/ethernet/mscc/ocelot_vsc7514.c +105 -16

271 lines not on this page · raw message

include/soc/mscc/ocelot.h +2 -0
index 1dc0c6d0671a..fc7dc6679739 100644
@@ -602,6 +602,8 @@ struct ocelot_port {
 
 struct ocelot {
 	struct device			*dev;
+	struct devlink			*devlink;
+	struct devlink_port		*devlink_ports;
 
 	const struct ocelot_ops		*ops;
 	struct regmap			*targets[TARGET_MAX];
Signature · 1 line
2.25.1
author maintainer
#9 lore raw

PATCH v5 9/10 net: mscc: ocelot: initialize watermarks to sane defaults

In reply to Vladimir Oltean

From: Vladimir Oltean <[email protected]>

This is meant to be a gentle introduction into the world of watermarks on ocelot. The code is placed in ocelot_devlink.c because it will be integrated with devlink, even if it isn't right now.

My first step was intended to be to replicate the default configuration of the congestion watermarks programatically, since they are now going to be tuned by the user.

But after studying and understanding through trial and error how they work, I now believe that the configuration used out of reset does not do justice to the word "reservation", since the sum of all reservations exceeds the total amount of resources (otherwise said, all reservations cannot be fulfilled at the same time, which means that, contrary to the reference manual, they don't guarantee anything).

As an example, here's a dump of the reservation watermarks for frame buffers, for port 0 (for brevity, the ports 1-6 were omitted, but they have the same configuration):

BUF_Q_RSRV_I(port 0, prio 0) = max 3000 bytes
BUF_Q_RSRV_I(port 0, prio 1) = max 3000 bytes
BUF_Q_RSRV_I(port 0, prio 2) = max 3000 bytes
BUF_Q_RSRV_I(port 0, prio 3) = max 3000 bytes
BUF_Q_RSRV_I(port 0, prio 4) = max 3000 bytes
BUF_Q_RSRV_I(port 0, prio 5) = max 3000 bytes
BUF_Q_RSRV_I(port 0, prio 6) = max 3000 bytes
BUF_Q_RSRV_I(port 0, prio 7) = max 3000 bytes

Otherwise said, every port-tc has an ingress reservation of 3000 bytes, and there are 7 ports in VSC9959 Felix (6 user ports and 1 CPU port). Concentrating only on the ingress reservations, there are, in total, 8 [traffic classes] x 7 [ports] x 3000 [bytes] = 168,000 bytes of memory reserved on ingress.
But, surprise, Felix only has 128 KB of packet buffer in total... A similar thing happens with Seville, which has a larger packet buffer, but also more ports, and the default configuration is also overcommitted.

This patch disables the (apparently) bogus reservations and moves all resources to the shared area. This way, real reservations can be set up by the user, using devlink-sb.

---
Changes in v5:
None.

Changes in v4:
None.

Changes in v3:
None.

Changes in v2:
None.

 drivers/net/ethernet/mscc/Makefile         |   3 +-
 drivers/net/ethernet/mscc/ocelot.c         |   1 +
 drivers/net/ethernet/mscc/ocelot.h         |   1 +
 drivers/net/ethernet/mscc/ocelot_devlink.c | 442 +++++++++++++++++++++
 4 files changed, 446 insertions(+), 1 deletion(-)
 create mode 100644 drivers/net/ethernet/mscc/ocelot_devlink.c
drivers/net/ethernet/mscc/Makefile +2 -1
index 58f94c3d80f9..346bba2730ad 100644
@@ -6,7 +6,8 @@ mscc_ocelot_switch_lib-y := \
 	ocelot_police.o \
 	ocelot_vcap.o \
 	ocelot_flower.o \
-	ocelot_ptp.o
+	ocelot_ptp.o \
+	ocelot_devlink.o
 obj-$(CONFIG_MSCC_OCELOT_SWITCH) += mscc_ocelot.o
 mscc_ocelot-y := \
 	ocelot_vsc7514.o \
drivers/net/ethernet/mscc/ocelot.c +1 -0
index 3af8e607c8a9..474ea5e59f89 100644
@@ -1624,6 +1624,7 @@ int ocelot_init(struct ocelot *ocelot)
 	INIT_DELAYED_WORK(&ocelot->stats_work, ocelot_check_stats_work);
 	queue_delayed_work(ocelot->stats_queue, &ocelot->stats_work,
 			   OCELOT_STATS_CHECK_DELAY);
+	ocelot_watermark_init(ocelot);
 
 	return 0;
 }
drivers/net/ethernet/mscc/ocelot.h +1 -0
index de4dd62ef39e..c9aefefc83ca 100644
@@ -126,6 +126,7 @@ void ocelot_devlink_teardown(struct ocelot *ocelot);
 int ocelot_port_devlink_init(struct ocelot *ocelot, int port,
 			     enum devlink_port_flavour flavour);
 void ocelot_port_devlink_teardown(struct ocelot *ocelot, int port);
+void ocelot_watermark_init(struct ocelot *ocelot);
 
 extern struct notifier_block ocelot_netdevice_nb;
 extern struct notifier_block ocelot_switchdev_nb;
drivers/net/ethernet/mscc/ocelot_devlink.c new file +442 -0

442 lines not on this page · raw message

Signature · 1 line
2.25.1
author maintainer
#10 lore raw

PATCH v5 10/10 net: mscc: ocelot: configure watermarks using devlink-sb

In reply to Vladimir Oltean

From: Vladimir Oltean <[email protected]>

Using devlink-sb, we can configure 12/16 (the important 75%) of the switch's controlling watermarks for congestion drops, and we can monitor 50% of the watermark occupancies (we can monitor the reservation watermarks, but not the sharing watermarks, which are exposed as pool sizes).

The following definitions can be made:

SB_BUF=0 # The devlink-sb for frame buffers
SB_REF=1 # The devlink-sb for frame references
POOL_ING=0 # The pool for ingress traffic. Both devlink-sb instances

           # have one of these.
POOL_EGR=1 # The pool for egress traffic. Both devlink-sb instances
           # have one of these.

Editing the hardware watermarks is done in the following way:
BUF_xxxx_I is accessed when sb=$SB_BUF and pool=$POOL_ING REF_xxxx_I is accessed when sb=$SB_REF and pool=$POOL_ING BUF_xxxx_E is accessed when sb=$SB_BUF and pool=$POOL_EGR REF_xxxx_E is accessed when sb=$SB_REF and pool=$POOL_EGR

Configuring the sharing watermarks for COL_SHR(dp=0) is done implicitly by modifying the corresponding pool size. By default, the pool size has maximum size, so this can be skipped.

devlink sb pool set pci/0000:00:00.5 sb $SB_BUF pool $POOL_ING \
size 129840 thtype static

Since by default there is no buffer reservation, the above command has maxed out BUF_COL_SHR_I(dp=0).

Configuring the per-port reservation watermark (P_RSRV) is done in the following way:

devlink sb port pool set pci/0000:00:00.5/0 sb $SB_BUF \

	pool $POOL_ING th 1000

The above command sets BUF_P_RSRV_I(port 0) to 1000 bytes. After this command, the sharing watermarks are internally reconfigured with 1000 bytes less, i.e. from 129840 bytes to 128840 bytes.

Configuring the per-port-tc reservation watermarks (Q_RSRV) is done in the following way:

for tc in {0..7}; do

	devlink sb tc bind set pci/0000:00:00.5/0 sb 0 tc $tc \
		type ingress pool $POOL_ING \
		th 3000

done

The above command sets BUF_Q_RSRV_I(port 0, tc 0..7) to 3000 bytes. The sharing watermarks are again reconfigured with 24000 bytes less.

---
Changes in v5:
None.

Changes in v4:
Created some helper functions: devlink_to_ocelot, devlink_port_to_ocelot and devlink_port_to_port.

Changes in v3:
None.

Changes in v2:
- Calling ocelot_watermark_init from ocelot_devlink_sb_register, since there was a bug in v1 where ocelot_watermark_init would use an uninitialized value from ocelot->pool_size, so we need to ensure that ocelot_watermark_init is called after ocelot_devlink_sb_register actually initializes the pool sizes.
- Deleted the "detected N bytes and M frame references" message since that information is now available through devlink-sb.

 drivers/net/dsa/ocelot/felix.c             | 118 ++++++
 drivers/net/ethernet/mscc/ocelot.c         |   5 -
 drivers/net/ethernet/mscc/ocelot.h         |   1 -
 drivers/net/ethernet/mscc/ocelot_devlink.c | 453 ++++++++++++++++++++-
 drivers/net/ethernet/mscc/ocelot_net.c     | 143 +++++++
 drivers/net/ethernet/mscc/ocelot_vsc7514.c |   8 +
 include/soc/mscc/ocelot.h                  |  47 +++
 7 files changed, 764 insertions(+), 11 deletions(-)
drivers/net/dsa/ocelot/felix.c +118 -0
index 6c584496abc6..2c6ac2b137ec 100644
@@ -427,6 +427,7 @@ static int felix_init_structs(struct felix *felix, int num_phys_ports)
 	ocelot->ops		= felix->info->ops;
 	ocelot->inj_prefix	= OCELOT_TAG_PREFIX_SHORT;
 	ocelot->xtr_prefix	= OCELOT_TAG_PREFIX_SHORT;
+	ocelot->devlink		= felix->ds->devlink;
 
 	port_phy_modes = kcalloc(num_phys_ports, sizeof(phy_interface_t),
 				 GFP_KERNEL);
@@ -588,6 +589,10 @@ static int felix_setup(struct dsa_switch *ds)
 		felix_port_qos_map_init(ocelot, port);
 	}
 
+	err = ocelot_devlink_sb_register(ocelot);
+	if (err)
+		return err;
+
 	/* Include the CPU port module in the forwarding mask for unknown
 	 * unicast - the hardware default value for ANA_FLOODING_FLD_UNICAST
 	 * excludes BIT(ocelot->num_phys_ports), and so does ocelot_init, since
@@ -610,6 +615,7 @@ static void felix_teardown(struct dsa_switch *ds)
 	struct felix *felix = ocelot_to_felix(ocelot);
 	int port;
 
+	ocelot_devlink_sb_unregister(ocelot);
 	ocelot_deinit_timestamp(ocelot);
 	ocelot_deinit(ocelot);
 
@@ -751,6 +757,108 @@ static int felix_port_setup_tc(struct dsa_switch *ds, int port,
 		return -EOPNOTSUPP;
 }
 
+static int felix_sb_pool_get(struct dsa_switch *ds, unsigned int sb_index,
+			     u16 pool_index,
+			     struct devlink_sb_pool_info *pool_info)
+{
+	struct ocelot *ocelot = ds->priv;
+
+	return ocelot_sb_pool_get(ocelot, sb_index, pool_index, pool_info);
+}
+
+static int felix_sb_pool_set(struct dsa_switch *ds, unsigned int sb_index,
+			     u16 pool_index, u32 size,
+			     enum devlink_sb_threshold_type threshold_type,
+			     struct netlink_ext_ack *extack)
+{
+	struct ocelot *ocelot = ds->priv;
+
+	return ocelot_sb_pool_set(ocelot, sb_index, pool_index, size,
+				  threshold_type, extack);
+}
+
+static int felix_sb_port_pool_get(struct dsa_switch *ds, int port,
+				  unsigned int sb_index, u16 pool_index,
+				  u32 *p_threshold)
+{
+	struct ocelot *ocelot = ds->priv;
+
+	return ocelot_sb_port_pool_get(ocelot, port, sb_index, pool_index,
+				       p_threshold);
+}
+
+static int felix_sb_port_pool_set(struct dsa_switch *ds, int port,
+				  unsigned int sb_index, u16 pool_index,
+				  u32 threshold, struct netlink_ext_ack *extack)
+{
+	struct ocelot *ocelot = ds->priv;
+
+	return ocelot_sb_port_pool_set(ocelot, port, sb_index, pool_index,
+				       threshold, extack);
+}
+
+static int felix_sb_tc_pool_bind_get(struct dsa_switch *ds, int port,
+				     unsigned int sb_index, u16 tc_index,
+				     enum devlink_sb_pool_type pool_type,
+				     u16 *p_pool_index, u32 *p_threshold)
+{
+	struct ocelot *ocelot = ds->priv;
+
+	return ocelot_sb_tc_pool_bind_get(ocelot, port, sb_index, tc_index,
+					  pool_type, p_pool_index,
+					  p_threshold);
+}
+
+static int felix_sb_tc_pool_bind_set(struct dsa_switch *ds, int port,
+				     unsigned int sb_index, u16 tc_index,
+				     enum devlink_sb_pool_type pool_type,
+				     u16 pool_index, u32 threshold,
+				     struct netlink_ext_ack *extack)
+{
+	struct ocelot *ocelot = ds->priv;
+
+	return ocelot_sb_tc_pool_bind_set(ocelot, port, sb_index, tc_index,
+					  pool_type, pool_index, threshold,
+					  extack);
+}
+
+static int felix_sb_occ_snapshot(struct dsa_switch *ds,
+				 unsigned int sb_index)
+{
+	struct ocelot *ocelot = ds->priv;
+
+	return ocelot_sb_occ_snapshot(ocelot, sb_index);
+}
+
+static int felix_sb_occ_max_clear(struct dsa_switch *ds,
+				  unsigned int sb_index)
+{
+	struct ocelot *ocelot = ds->priv;
+
+	return ocelot_sb_occ_max_clear(ocelot, sb_index);
+}
+
+static int felix_sb_occ_port_pool_get(struct dsa_switch *ds, int port,
+				      unsigned int sb_index, u16 pool_index,
+				      u32 *p_cur, u32 *p_max)
+{
+	struct ocelot *ocelot = ds->priv;
+
+	return ocelot_sb_occ_port_pool_get(ocelot, port, sb_index, pool_index,
+					   p_cur, p_max);
+}
+
+static int felix_sb_occ_tc_port_bind_get(struct dsa_switch *ds, int port,
+					 unsigned int sb_index, u16 tc_index,
+					 enum devlink_sb_pool_type pool_type,
+					 u32 *p_cur, u32 *p_max)
+{
+	struct ocelot *ocelot = ds->priv;
+
+	return ocelot_sb_occ_tc_port_bind_get(ocelot, port, sb_index, tc_index,
+					      pool_type, p_cur, p_max);
+}
+
 const struct dsa_switch_ops felix_switch_ops = {
 	.get_tag_protocol		= felix_get_tag_protocol,
 	.setup				= felix_setup,
@@ -789,6 +897,16 @@ const struct dsa_switch_ops felix_switch_ops = {
 	.cls_flower_del			= felix_cls_flower_del,
 	.cls_flower_stats		= felix_cls_flower_stats,
 	.port_setup_tc			= felix_port_setup_tc,
+	.devlink_sb_pool_get		= felix_sb_pool_get,
+	.devlink_sb_pool_set		= felix_sb_pool_set,
+	.devlink_sb_port_pool_get	= felix_sb_port_pool_get,
+	.devlink_sb_port_pool_set	= felix_sb_port_pool_set,
+	.devlink_sb_tc_pool_bind_get	= felix_sb_tc_pool_bind_get,
+	.devlink_sb_tc_pool_bind_set	= felix_sb_tc_pool_bind_set,
+	.devlink_sb_occ_snapshot	= felix_sb_occ_snapshot,
+	.devlink_sb_occ_max_clear	= felix_sb_occ_max_clear,
+	.devlink_sb_occ_port_pool_get	= felix_sb_occ_port_pool_get,
+	.devlink_sb_occ_tc_port_bind_get= felix_sb_occ_tc_port_bind_get,
 };
 
 struct net_device *felix_port_to_netdev(struct ocelot *ocelot, int port)
drivers/net/ethernet/mscc/ocelot.c +0 -5
index 474ea5e59f89..a560d6be2a44 100644
@@ -1480,10 +1480,6 @@ static void ocelot_detect_features(struct ocelot *ocelot)
 
 	eq_ctrl = ocelot_read(ocelot, QSYS_EQ_CTRL);
 	ocelot->num_frame_refs = QSYS_MMGT_EQ_CTRL_FP_FREE_CNT(eq_ctrl);
-
-	dev_info(ocelot->dev,
-		 "Detected %d bytes of packet buffer and %d frame references\n",
-		 ocelot->packet_buffer_size, ocelot->num_frame_refs);
 }
 
 int ocelot_init(struct ocelot *ocelot)
@@ -1624,7 +1620,6 @@ int ocelot_init(struct ocelot *ocelot)
 	INIT_DELAYED_WORK(&ocelot->stats_work, ocelot_check_stats_work);
 	queue_delayed_work(ocelot->stats_queue, &ocelot->stats_work,
 			   OCELOT_STATS_CHECK_DELAY);
-	ocelot_watermark_init(ocelot);
 
 	return 0;
 }
drivers/net/ethernet/mscc/ocelot.h +0 -1
index c9aefefc83ca..de4dd62ef39e 100644
@@ -126,7 +126,6 @@ void ocelot_devlink_teardown(struct ocelot *ocelot);
 int ocelot_port_devlink_init(struct ocelot *ocelot, int port,
 			     enum devlink_port_flavour flavour);
 void ocelot_port_devlink_teardown(struct ocelot *ocelot, int port);
-void ocelot_watermark_init(struct ocelot *ocelot);
 
 extern struct notifier_block ocelot_netdevice_nb;
 extern struct notifier_block ocelot_switchdev_nb;
drivers/net/ethernet/mscc/ocelot_devlink.c +448 -5

480 lines not on this page · raw message

drivers/net/ethernet/mscc/ocelot_net.c +143 -0

156 lines not on this page · raw message

drivers/net/ethernet/mscc/ocelot_vsc7514.c +8 -0
index f46199b32fa7..b61962275c7a 100644
@@ -1366,6 +1366,10 @@ static int mscc_ocelot_probe(struct platform_device *pdev)
 	if (err)
 		goto out_ocelot_devlink_unregister;
 
+	err = ocelot_devlink_sb_register(ocelot);
+	if (err)
+		goto out_ocelot_release_ports;
+
 	if (ocelot->ptp) {
 		err = ocelot_init_timestamp(ocelot, &ocelot_ptp_clock_info);
 		if (err) {
@@ -1385,6 +1389,9 @@ static int mscc_ocelot_probe(struct platform_device *pdev)
 
 	return 0;
 
+out_ocelot_release_ports:
+	mscc_ocelot_release_ports(ocelot);
+	mscc_ocelot_teardown_devlink_ports(ocelot);
 out_ocelot_devlink_unregister:
 	devlink_unregister(devlink);
 out_ocelot_deinit:
@@ -1401,6 +1408,7 @@ static int mscc_ocelot_remove(struct platform_device *pdev)
 	struct ocelot *ocelot = platform_get_drvdata(pdev);
 
 	ocelot_deinit_timestamp(ocelot);
+	ocelot_devlink_sb_unregister(ocelot);
 	mscc_ocelot_release_ports(ocelot);
 	mscc_ocelot_teardown_devlink_ports(ocelot);
 	devlink_unregister(ocelot->devlink);
include/soc/mscc/ocelot.h +47 -0

63 lines not on this page · raw message

Signature · 1 line
2.25.1
maintainer
#11 lore raw

Re: [PATCH v5 net-next 10/10] net: mscc: ocelot: configure watermarks using devlink-sb

drivers/net/ethernet/mscc/ocelot_net.c:141:33: warning: ‘ocelot_devlink_ops’ defined but not used [-Wunused-const-variable=]

  141 | static const struct devlink_ops ocelot_devlink_ops = {
      |                                 ^~~~~~~~~~~~~~~~~~