DC Patches January 15, 2020
cover DC Patches January 15, 2020
This DC patchset brings improvements in multiple areas.
Anthony Koo (1):
drm/amd/display: [FW Promotion] Release 0.0.48
Aric Cyr (2):
drm/amd/display: Allow PSTATE chnage when no displays are enabled drm/amd/display: 3.2.119
Bing Guo (2):
drm/amd/display: Change function decide_dp_link_settings to avoid
infinite looping
drm/amd/display: Fix dml20v2_ModeSupportAndSystemConfigurationFull()
to check DesiredBPP.
George Shen (1):
drm/amd/display: Log link/connector info provided in BIOS object table
Jake Wang (1):
drm/amd/display: Update dram_clock_change_latency for DCN2.1
Mike Hsieh (1):
drm/amd/display: disable FEC while using eDP
Nicholas Kazlauskas (4):
drm/amd/display: Use hardware sequencer functions for PG control drm/amd/display: Allow dmub srv hardware reset before HW init drm/amd/display: Guard against NULL pointer deref when get_i2c_info
fails
drm/amd/display: Fix reset sequence with driver direct DMCUB fw load
Stylon Wang (1):
drm/amd/display: Report Freesync to vrr_range debugfs entry in DRM
Sung Lee (1):
drm/amd/display: DCN2X Find Secondary Pipe properly in MPO + ODM Case
Vladimir Stempen (1):
drm/amd/display: Fixed corruptions on HPDRX link loss restore
Wyatt Wood (1):
drm/amd/display: Allow dmu_stg to support cached inbox for dmub
.../gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 4 + .../display/dc/clk_mgr/dcn30/dcn30_clk_mgr.c | 6 +- drivers/gpu/drm/amd/display/dc/core/dc.c | 6 + drivers/gpu/drm/amd/display/dc/core/dc_link.c | 28 ++++- .../gpu/drm/amd/display/dc/core/dc_link_ddc.c | 6 + .../gpu/drm/amd/display/dc/core/dc_link_dp.c | 7 +- drivers/gpu/drm/amd/display/dc/dc.h | 2 +- .../amd/display/dc/dcn10/dcn10_hw_sequencer.c | 18 ++- .../drm/amd/display/dc/dcn20/dcn20_hwseq.c | 9 +- .../drm/amd/display/dc/dcn20/dcn20_resource.c | 7 +- .../drm/amd/display/dc/dcn21/dcn21_resource.c | 2 +- .../dc/dml/dcn20/display_mode_vba_20v2.c | 117 ++++++++++++------ .../gpu/drm/amd/display/dmub/inc/dmub_cmd.h | 4 +- .../gpu/drm/amd/display/dmub/src/dmub_dcn20.c | 11 +- .../gpu/drm/amd/display/dmub/src/dmub_srv.c | 9 +- 15 files changed, 171 insertions(+), 65 deletions(-)
Signature · 6 lines
2.25.1 _______________________________________________ amd-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/amd-gfx
PATCH 1/16 drm/amd/display: Fixed corruptions on HPDRX link loss restore
From: Vladimir Stempen <[email protected]>
[why]
Heavy corruption or blank screen reported on wake, with 6k display connected and FEC enabled
[how]
When Disable/Enable stream for display pipes on HPDRX, DC should take into account ODM split pipes.
--- drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c +2 -2
@@ -3045,14 +3045,14 @@ bool dc_link_handle_hpd_rx_irq(struct dc_link *link, union hpd_irq_data *out_hpdfor (i =0 ; i <MAX_PIPES ; i++) { pipe_ctx = &link->dc->current_state->res_ctx.pipe_ctx[i];if (pipe_ctx && pipe_ctx->stream && !pipe_ctx->stream->dpms_off && - pipe_ctx->stream->link == link) + pipe_ctx->stream->link == link && !pipe_ctx->prev_odm_pipe)core_link_disable_stream (pipe_ctx); }for (i =0 ; i <MAX_PIPES ; i++) { pipe_ctx = &link->dc->current_state->res_ctx.pipe_ctx[i];if (pipe_ctx && pipe_ctx->stream && !pipe_ctx->stream->dpms_off && - pipe_ctx->stream->link == link) + pipe_ctx->stream->link == link && !pipe_ctx->prev_odm_pipe)core_link_enable_stream (link->dc->current_state, pipe_ctx); }
Signature · 6 lines
2.25.1 _______________________________________________ amd-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/amd-gfx
PATCH 2/16 drm/amd/display: disable FEC while using eDP
In reply to Anson JacobFrom: Mike Hsieh <[email protected]>
[Why]
FEC over eDP support is incomplete.
[How]
Disable FEC over eDP.
--- drivers/gpu/drm/amd/display/dc/core/dc_link.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)
drivers/gpu/drm/amd/display/dc/core/dc_link.c +3 -2
@@ -3700,9 +3700,10 @@ bool dc_link_should_enable_fec(const struct dc_link *link)bool is_fec_disable = false;bool ret = false; -if (link->connector_signal !=SIGNAL_TYPE_DISPLAY_PORT_MST && +if ((link->connector_signal !=SIGNAL_TYPE_DISPLAY_PORT_MST && link->local_sink && - link->local_sink->edid_caps.panel_patch.disable_fec) + link->local_sink->edid_caps.panel_patch.disable_fec) || + link->connector_signal ==SIGNAL_TYPE_EDP )// Disable FEC for eDP is_fec_disable = true;if (dc_link_is_fec_supported (link) && !link->dc->debug.disable_fec && !is_fec_disable)
Signature · 6 lines
2.25.1 _______________________________________________ amd-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/amd-gfx
PATCH 3/16 drm/amd/display: DCN2X Find Secondary Pipe properly in MPO + ODM Case
In reply to Anson JacobFrom: Sung Lee <[email protected]>
[WHY]
Previously as MPO + ODM Combine was not supported, finding secondary pipes for each case was mutually exclusive. Now that both are supported at the same time, both cases should be taken into account when finding a secondary pipe.
[HOW]
If a secondary pipe cannot be found based on previous bottom pipe, search for a second pipe using next_odm_pipe instead.
--- drivers/gpu/drm/amd/display/dc/dcn20/dcn20_resource.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-)
drivers/gpu/drm/amd/display/dc/dcn20/dcn20_resource.c +4 -3
@@ -2517,8 +2517,7 @@ struct pipe_ctx *dcn20_find_secondary_pipe(struct dc *dc,* if this primary pipe has a bottom pipe in prev. state * and if the bottom pipe is still available (which it should be), * pick that pipe as secondary -* Same logic applies for ODM pipes. Since mpo is not allowed with odm -* check in else case. +* Same logic applies for ODM pipes */ if (dc->current_state->res_ctx.pipe_ctx[primary_pipe->pipe_idx].bottom_pipe) { preferred_pipe_idx = dc->current_state->res_ctx.pipe_ctx[primary_pipe->pipe_idx].bottom_pipe->pipe_idx;
@@ -2526,7 +2525,9 @@ struct pipe_ctx *dcn20_find_secondary_pipe(struct dc *dc, secondary_pipe = &res_ctx->pipe_ctx[preferred_pipe_idx]; secondary_pipe->pipe_idx = preferred_pipe_idx; } - }else if (dc->current_state->res_ctx.pipe_ctx[primary_pipe->pipe_idx].next_odm_pipe) { + } +if (secondary_pipe ==NULL && + dc->current_state->res_ctx.pipe_ctx[primary_pipe->pipe_idx].next_odm_pipe) { preferred_pipe_idx = dc->current_state->res_ctx.pipe_ctx[primary_pipe->pipe_idx].next_odm_pipe->pipe_idx;if (res_ctx->pipe_ctx[preferred_pipe_idx].stream ==NULL ) { secondary_pipe = &res_ctx->pipe_ctx[preferred_pipe_idx];
Signature · 6 lines
2.25.1 _______________________________________________ amd-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/amd-gfx
PATCH 4/16 drm/amd/display: Use hardware sequencer functions for PG control
In reply to Anson JacobFrom: Nicholas Kazlauskas <[email protected]>
[Why & How]
These can differ per ASIC or not be present. Don't call the dcn20 ones directly but rather the ones defined by the ASIC init table.
--- .../amd/display/dc/dcn10/dcn10_hw_sequencer.c | 18 ++++++++++++++---- .../gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c | 9 +++++++-- 2 files changed, 21 insertions(+), 6 deletions(-)
drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c +14 -4
@@ -647,8 +647,13 @@ static void power_on_plane(if (REG (DC_IP_REQUEST_CNTL )) {REG_SET (DC_IP_REQUEST_CNTL ,0 ,IP_REQUEST_EN ,1 ); - hws->funcs.dpp_pg_control (hws, plane_id, true); - hws->funcs.hubp_pg_control (hws, plane_id, true); + +if (hws->funcs.dpp_pg_control) + hws->funcs.dpp_pg_control (hws, plane_id, true); + +if (hws->funcs.hubp_pg_control) + hws->funcs.hubp_pg_control (hws, plane_id, true); +REG_SET (DC_IP_REQUEST_CNTL ,0 ,IP_REQUEST_EN ,0 ); DC_LOG_DEBUG(
@@ -1082,8 +1087,13 @@ void dcn10_plane_atomic_power_down(struct dc *dc,if (REG (DC_IP_REQUEST_CNTL )) {REG_SET (DC_IP_REQUEST_CNTL ,0 ,IP_REQUEST_EN ,1 ); - hws->funcs.dpp_pg_control (hws, dpp->inst, false); - hws->funcs.hubp_pg_control (hws, hubp->inst, false); + +if (hws->funcs.dpp_pg_control) + hws->funcs.dpp_pg_control (hws, dpp->inst, false); + +if (hws->funcs.hubp_pg_control) + hws->funcs.hubp_pg_control (hws, hubp->inst, false); + dpp->funcs->dpp_reset (dpp);REG_SET (DC_IP_REQUEST_CNTL ,0 ,IP_REQUEST_EN ,0 );
drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c +7 -2
@@ -1062,8 +1062,13 @@ static void dcn20_power_on_plane(if (REG (DC_IP_REQUEST_CNTL )) {REG_SET (DC_IP_REQUEST_CNTL ,0 ,IP_REQUEST_EN ,1 ); -dcn20_dpp_pg_control (hws, pipe_ctx->plane_res.dpp->inst, true); -dcn20_hubp_pg_control (hws, pipe_ctx->plane_res.hubp->inst, true); + +if (hws->funcs.dpp_pg_control) + hws->funcs.dpp_pg_control (hws, pipe_ctx->plane_res.dpp->inst, true); + +if (hws->funcs.hubp_pg_control) + hws->funcs.hubp_pg_control (hws, pipe_ctx->plane_res.hubp->inst, true); +REG_SET (DC_IP_REQUEST_CNTL ,0 ,IP_REQUEST_EN ,0 ); DC_LOG_DEBUG(
Signature · 6 lines
2.25.1 _______________________________________________ amd-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/amd-gfx
PATCH 5/16 drm/amd/display: Report Freesync to vrr_range debugfs entry in DRM
In reply to Anson JacobFrom: Stylon Wang <[email protected]>
[Why]
Since Linux 5.9.0, DRM has provided vrr_range debugfs for all connectors. Reporting Freesync capability to vrr_range debugfs entry registered in Linux DM no longer works.
[How]
Report min/max vertical frequency to vrr_range debugfs entrry created by DRM connectors. Remove vrr_range debugfs entry from Linux DM.
--- drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 4 ++++ 1 file changed, 4 insertions(+)
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c +4 -0
@@ -9890,6 +9890,10 @@ void amdgpu_dm_update_freesync_caps(struct drm_connector *connector, amdgpu_dm_connector->max_vfreq = range->max_vfreq; amdgpu_dm_connector->pixel_clock_mhz = range->pixel_clock_mhz *10 ; + + connector->display_info.monitor_range.min_vfreq = range->min_vfreq; + connector->display_info.monitor_range.max_vfreq = range->max_vfreq; +break ; }
Signature · 6 lines
2.25.1 _______________________________________________ amd-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/amd-gfx
PATCH 6/16 drm/amd/display: Allow dmub srv hardware reset before HW init
In reply to Anson JacobFrom: Nicholas Kazlauskas <[email protected]>
[Why]
We need hardware reset before hardware init for backdoor loading when we're reusing the framebuffer memory.
[How]
This doesn't run if the hardware isn't already in reset from software perspective. The reset function has register level checks so just remove the software one here.
--- drivers/gpu/drm/amd/display/dmub/src/dmub_srv.c | 3 --- 1 file changed, 3 deletions(-)
drivers/gpu/drm/amd/display/dmub/src/dmub_srv.c +0 -3
@@ -489,9 +489,6 @@ enum dmub_status dmub_srv_hw_reset(struct dmub_srv *dmub)if (!dmub->sw_init)return DMUB_STATUS_INVALID ; -if (dmub->hw_init == false) -return DMUB_STATUS_OK ; -if (dmub->hw_funcs.reset) dmub->hw_funcs.reset (dmub);
Signature · 6 lines
2.25.1 _______________________________________________ amd-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/amd-gfx
PATCH 7/16 drm/amd/display: Guard against NULL pointer deref when get_i2c_info fails
In reply to Anson JacobFrom: Nicholas Kazlauskas <[email protected]>
[Why]
If the BIOS table is invalid or corrupt then get_i2c_info can fail and we dereference a NULL pointer.
[How]
Check that ddc_pin is not NULL before using it and log an error if it is because this is unexpected.
--- drivers/gpu/drm/amd/display/dc/core/dc_link.c | 5 +++++ 1 file changed, 5 insertions(+)
drivers/gpu/drm/amd/display/dc/core/dc_link.c +5 -0
@@ -1478,6 +1478,11 @@ static bool dc_link_construct(struct dc_link *link, goto ddc_create_fail; } +if (!link->ddc->ddc_pin) { +DC_ERROR ("Failed to get I2C info for connector!\n" ); + goto ddc_create_fail; + } + link->ddc_hw_inst =dal_ddc_get_line (dal_ddc_service_get_ddc_pin (link->ddc));
Signature · 6 lines
2.25.1 _______________________________________________ amd-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/amd-gfx
PATCH 8/16 drm/amd/display: Fix reset sequence with driver direct DMCUB fw load
In reply to Anson JacobFrom: Nicholas Kazlauskas <[email protected]>
[Why]
DMCUB encounters a page fault/double exception with driver direct load because DMCUB is not held in soft reset after releasing secure reset.
The clean shutdown sequence via GPINT is also not executed in this sequence which leaves hardware behavior in an indeterminate state.
[How]
Move reset earlier in the sequence.
--- drivers/gpu/drm/amd/display/dmub/src/dmub_srv.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
drivers/gpu/drm/amd/display/dmub/src/dmub_srv.c +3 -3
@@ -406,6 +406,9 @@ enum dmub_status dmub_srv_hw_init(struct dmub_srv *dmub, dmub->fb_offset = params->fb_offset; dmub->psp_version = params->psp_version; +if (dmub->hw_funcs.reset) + dmub->hw_funcs.reset (dmub); +if (inst_fb && data_fb) { cw0.offset.quad_part = inst_fb->gpu_addr; cw0.region.base =DMUB_CW0_BASE ;
@@ -427,9 +430,6 @@ enum dmub_status dmub_srv_hw_init(struct dmub_srv *dmub, } -if (dmub->hw_funcs.reset) - dmub->hw_funcs.reset (dmub); -if (inst_fb && data_fb && bios_fb && mail_fb && tracebuff_fb && fw_state_fb && scratch_mem_fb) { cw2.offset.quad_part = data_fb->gpu_addr;
Signature · 6 lines
2.25.1 _______________________________________________ amd-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/amd-gfx
PATCH 9/16 drm/amd/display: Change function decide_dp_link_settings to avoid infinite looping
In reply to Anson JacobFrom: Bing Guo <[email protected]>
Why:
Function decide_dp_link_settings() loops infinitely when required bandwidth can't be supported.
How:
Check the required bandwidth against verified_link_cap before trying to find a link setting for it.
--- drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c | 3 +++ 1 file changed, 3 insertions(+)
drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c +3 -0
@@ -2399,6 +2399,9 @@ static bool decide_dp_link_settings(struct dc_link *link, struct dc_link_setting initial_link_setting;uint32_t link_bw; +if (req_bw >dc_link_bandwidth_kbps (link, &link->verified_link_cap)) +return false; +/* search for the minimum link setting that: * 1. is supported according to the link training result * 2. could support the b/w requested by the timing
Signature · 6 lines
2.25.1 _______________________________________________ amd-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/amd-gfx
PATCH 10/16 drm/amd/display: Allow dmu_stg to support cached inbox for dmub
In reply to Anson JacobFrom: Wyatt Wood <[email protected]>
[Why]
FW version check doesn't allow dmu_stg to support cached inbox, which yields much better performance than region 4.
[How]
Check a range of fw versions, rather than a simple greater than check.
--- drivers/gpu/drm/amd/display/dmub/src/dmub_dcn20.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-)
drivers/gpu/drm/amd/display/dmub/src/dmub_dcn20.c +9 -2
@@ -81,6 +81,13 @@ static inline void dmub_dcn20_translate_addr(const union dmub_addr *addr_in, addr_out->quad_part = addr_in->quad_part - fb_base + fb_offset; } +static inline bool dmub_dcn20_use_cached_inbox (struct dmub_srv *dmub) +{ +/* Cached inbox is not supported in this fw version range */ +return !(dmub->fw_version >=DMUB_FW_VERSION (1 ,0 ,0 ) && + dmub->fw_version <=DMUB_FW_VERSION (1 ,10 ,0 )); +} +void dmub_dcn20_reset (struct dmub_srv *dmub) {union dmub_gpint_data_register cmd;
@@ -216,7 +223,7 @@ void dmub_dcn20_setup_windows(struct dmub_srv *dmub,dmub_dcn20_translate_addr (&cw4->offset, fb_base, fb_offset, &offset);/* New firmware can support CW4. */ -if (dmub->fw_version >DMUB_FW_VERSION (1 ,0 ,10 )) { +if (dmub_dcn20_use_cached_inbox (dmub)) {REG_WRITE (DMCUB_REGION3_CW4_OFFSET , offset.u.low_part);REG_WRITE (DMCUB_REGION3_CW4_OFFSET_HIGH , offset.u.high_part);REG_WRITE (DMCUB_REGION3_CW4_BASE_ADDRESS , cw4->region.base);
@@ -255,7 +262,7 @@ void dmub_dcn20_setup_mailbox(struct dmub_srv *dmub, const struct dmub_region *inbox1) {/* New firmware can support CW4 for the inbox. */ -if (dmub->fw_version >DMUB_FW_VERSION (1 ,0 ,10 )) +if (dmub_dcn20_use_cached_inbox (dmub))REG_WRITE (DMCUB_INBOX1_BASE_ADDRESS , inbox1->base);else REG_WRITE (DMCUB_INBOX1_BASE_ADDRESS ,0x80000000 );
Signature · 6 lines
2.25.1 _______________________________________________ amd-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/amd-gfx
PATCH 11/16 drm/amd/display: Log link/connector info provided in BIOS object table
In reply to Anson JacobFrom: George Shen <[email protected]>
[Why/How]
Add logging statements to assist in debugging
errors in the BIOS object table.
--- drivers/gpu/drm/amd/display/dc/core/dc.c | 6 ++++++ drivers/gpu/drm/amd/display/dc/core/dc_link.c | 18 ++++++++++++++++++ .../gpu/drm/amd/display/dc/core/dc_link_ddc.c | 6 ++++++ 3 files changed, 30 insertions(+)
drivers/gpu/drm/amd/display/dc/core/dc.c +6 -0
@@ -175,6 +175,8 @@ static bool create_links( connectors_num = bios->funcs->get_connectors_number (bios); +DC_LOG_DC ("BIOS object table - number of connectors: %d" , connectors_num); +if (connectors_num >ENUM_ID_COUNT ) { dm_error( "DC: Number of connectors %d exceeds maximum of %d!\n",
@@ -193,6 +195,8 @@ static bool create_links(struct link_init_data link_init_params = {0 };struct dc_link *link; +DC_LOG_DC ("BIOS object table - printing link object info for connector number: %d, link_index: %d" , i, dc->link_count); + link_init_params.ctx = dc->ctx;/* next BIOS object table connector */ link_init_params.connector_index = i;
@@ -225,6 +229,8 @@ static bool create_links( } } +DC_LOG_DC ("BIOS object table - end" ); +for (i =0 ; i < num_virtual_links; i++) {struct dc_link *link =kzalloc (sizeof (*link),GFP_KERNEL );struct encoder_init_data enc_init = {0 };
drivers/gpu/drm/amd/display/dc/core/dc_link.c +18 -0
@@ -1398,10 +1398,12 @@ static bool dc_link_construct(struct dc_link *link, link->link_id = bios->funcs->get_connector_id (bios, init_params->connector_index); +DC_LOG_DC ("BIOS object table - link_id: %d" , link->link_id.id);if (bios->funcs->get_disp_connector_caps_info) { bios->funcs->get_disp_connector_caps_info (bios, link->link_id, &disp_connect_caps_info); link->is_internal_display = disp_connect_caps_info.INTERNAL_DISPLAY; +DC_LOG_DC ("BIOS object table - is_internal_display: %d" , link->is_internal_display); }if (link->link_id.type !=OBJECT_TYPE_CONNECTOR ) {
@@ -1416,10 +1418,14 @@ static bool dc_link_construct(struct dc_link *link, link->hpd_gpio =get_hpd_gpio (link->ctx->dc_bios, link->link_id, link->ctx->gpio_service); +if (link->hpd_gpio) {dal_gpio_open (link->hpd_gpio,GPIO_MODE_INTERRUPT );dal_gpio_unlock_pin (link->hpd_gpio); link->irq_source_hpd =dal_irq_get_source (link->hpd_gpio); + +DC_LOG_DC ("BIOS object table - hpd_gpio id: %d" , link->hpd_gpio->id); +DC_LOG_DC ("BIOS object table - hpd_gpio en: %d" , link->hpd_gpio->en); }switch (link->link_id.id) {
@@ -1516,6 +1522,8 @@ static bool dc_link_construct(struct dc_link *link, link->link_enc = link->dc->res_pool->funcs->link_enc_create (&enc_init_data); +DC_LOG_DC ("BIOS object table - DP_IS_USB_C: %d" , link->link_enc->features.flags.bits.DP_IS_USB_C); +if (!link->link_enc) {DC_ERROR ("Failed to create link encoder!\n" ); goto link_enc_create_fail;
@@ -1543,6 +1551,10 @@ static bool dc_link_construct(struct dc_link *link,if (link->device_tag.dev_id.device_type ==DEVICE_TYPE_LCD && link->connector_signal ==SIGNAL_TYPE_RGB )continue ; + +DC_LOG_DC ("BIOS object table - device_tag.acpi_device: %d" , link->device_tag.acpi_device); +DC_LOG_DC ("BIOS object table - device_tag.dev_id.device_type: %d" , link->device_tag.dev_id.device_type); +DC_LOG_DC ("BIOS object table - device_tag.dev_id.enum_id: %d" , link->device_tag.dev_id.enum_id);break ; }
@@ -1561,10 +1573,14 @@ static bool dc_link_construct(struct dc_link *link, path->device_acpi_enum == link->device_tag.acpi_device) { link->ddi_channel_mapping = path->channel_mapping; link->chip_caps = path->caps; +DC_LOG_DC ("BIOS object table - ddi_channel_mapping: 0x%04X" , link->ddi_channel_mapping.raw); +DC_LOG_DC ("BIOS object table - chip_caps: %d" , link->chip_caps); } else if (path->device_tag == link->device_tag.dev_id.raw_device_tag) { link->ddi_channel_mapping = path->channel_mapping; link->chip_caps = path->caps; +DC_LOG_DC ("BIOS object table - ddi_channel_mapping: 0x%04X" , link->ddi_channel_mapping.raw); +DC_LOG_DC ("BIOS object table - chip_caps: %d" , link->chip_caps); }break ; }
@@ -1583,6 +1599,7 @@ static bool dc_link_construct(struct dc_link *link, link->psr_settings.psr_version =DC_PSR_VERSION_UNSUPPORTED ; +DC_LOG_DC ("BIOS object table - dc_link_contruct finished successfully.\n" );return true; device_tag_fail: link->link_enc->funcs->destroy (&link->link_enc);
@@ -1599,6 +1616,7 @@ static bool dc_link_construct(struct dc_link *link, link->hpd_gpio =NULL ; } +DC_LOG_DC ("BIOS object table - dc_link_contruct failed.\n" );return false; }
drivers/gpu/drm/amd/display/dc/core/dc_link_ddc.c +6 -0
@@ -37,6 +37,8 @@#include "dc_link_ddc.h" #include "dce/dce_aux.h" +#define DC_LOGGER_INIT (logger) +/*DP to Dual link DVI converter*/ static const uint8_t DP_DVI_CONVERTER_ID_4 [] ="m2DVIa" ;static const uint8_t DP_DVI_CONVERTER_ID_5 [] ="3393N2" ;
@@ -194,6 +196,10 @@ static void ddc_service_construct(if (BP_RESULT_OK != dcb->funcs->get_i2c_info (dcb, init_data->id, &i2c_info)) { ddc_service->ddc_pin =NULL ; }else { +DC_LOGGER_INIT (ddc_service->ctx->logger); +DC_LOG_DC ("BIOS object table - i2c_line: %d" , i2c_info.i2c_line); +DC_LOG_DC ("BIOS object table - i2c_engine_id: %d" , i2c_info.i2c_engine_id); + hw_info.ddc_channel = i2c_info.i2c_line;if (ddc_service->link !=NULL ) hw_info.hw_supported = i2c_info.i2c_hw_assist;
Signature · 6 lines
2.25.1 _______________________________________________ amd-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/amd-gfx
PATCH 12/16 drm/amd/display: Fix dml20v2_ModeSupportAndSystemConfigurationFull() to check DesiredBPP.
In reply to Anson JacobFrom: Bing Guo <[email protected]>
Why:dml20v2_ModeSupportAndSystemConfigurationFull() didn't check against DesiredBPP, so it doesn't work correctly when DesiredBPP can't be satisfied.
How:
Port the TruncToValidBPP() version from display_mode_vba_21.c to display_mode_vba_20v2.c.
--- .../dc/dml/dcn20/display_mode_vba_20v2.c | 117 ++++++++++++------ 1 file changed, 79 insertions(+), 38 deletions(-)
drivers/gpu/drm/amd/display/dc/dml/dcn20/display_mode_vba_20v2.c +79 -38
@@ -3263,6 +3263,7 @@ static void CalculateFlipSchedule( static unsigned int TruncToValidBPP( double DecimalBPP, + double DesiredBPP, bool DSCEnabled, enum output_encoder_class Output, enum output_format_class Format,
@@ -3270,31 +3271,31 @@ static unsigned int TruncToValidBPP( {if (Output == dm_hdmi) {if (Format == dm_420) { -if (DecimalBPP >=18 ) +if (DecimalBPP >=18 && (DesiredBPP ==0 || DesiredBPP ==18 ))return 18 ; -else if (DecimalBPP >=15 ) +else if (DecimalBPP >=15 && (DesiredBPP ==0 || DesiredBPP ==15 ))return 15 ; -else if (DecimalBPP >=12 ) +else if (DecimalBPP >=12 && (DesiredBPP ==0 || DesiredBPP ==12 ))return 12 ;else return BPP_INVALID ; }else if (Format == dm_444) { -if (DecimalBPP >=36 ) +if (DecimalBPP >=36 && (DesiredBPP ==0 || DesiredBPP ==36 ))return 36 ; -else if (DecimalBPP >=30 ) +else if (DecimalBPP >=30 && (DesiredBPP ==0 || DesiredBPP ==30 ))return 30 ; -else if (DecimalBPP >=24 ) +else if (DecimalBPP >=24 && (DesiredBPP ==0 || DesiredBPP ==24 ))return 24 ; -else if (DecimalBPP >=18 ) +else if (DecimalBPP >=18 && (DesiredBPP ==0 || DesiredBPP ==18 ))return 18 ;else return BPP_INVALID ; }else { -if (DecimalBPP /1.5 >=24 ) +if (DecimalBPP /1.5 >=24 && (DesiredBPP ==0 || DesiredBPP ==24 ))return 24 ; -else if (DecimalBPP /1.5 >=20 ) +else if (DecimalBPP /1.5 >=20 && (DesiredBPP ==0 || DesiredBPP ==20 ))return 20 ; -else if (DecimalBPP /1.5 >=16 ) +else if (DecimalBPP /1.5 >=16 && (DesiredBPP ==0 || DesiredBPP ==16 ))return 16 ;else return BPP_INVALID ;
@@ -3302,53 +3303,86 @@ static unsigned int TruncToValidBPP( }else {if (DSCEnabled) {if (Format == dm_420) { -if (DecimalBPP <6 ) -return BPP_INVALID ; -else if (DecimalBPP >=1.5 * DSCInputBitPerComponent -1 /16 ) -return 1.5 * DSCInputBitPerComponent -1 /16 ; -else -return dml_floor (16 * DecimalBPP,1 ) /16 ; +if (DesiredBPP ==0 ) { +if (DecimalBPP <6 ) +return BPP_INVALID ; +else if (DecimalBPP >=1.5 * DSCInputBitPerComponent -1.0 /16.0 ) +return 1.5 * DSCInputBitPerComponent -1.0 /16.0 ; +else +return dml_floor (16 * DecimalBPP,1 ) /16.0 ; + }else { +if (DecimalBPP <6 + || DesiredBPP <6 + || DesiredBPP >1.5 * DSCInputBitPerComponent -1.0 /16.0 + || DecimalBPP < DesiredBPP) { +return BPP_INVALID ; + }else { +return DesiredBPP; + } + } }else if (Format == dm_n422) { -if (DecimalBPP <7 ) -return BPP_INVALID ; -else if (DecimalBPP >=2 * DSCInputBitPerComponent -1 /16 ) -return 2 * DSCInputBitPerComponent -1 /16 ; -else -return dml_floor (16 * DecimalBPP,1 ) /16 ; +if (DesiredBPP ==0 ) { +if (DecimalBPP <7 ) +return BPP_INVALID ; +else if (DecimalBPP >=2 * DSCInputBitPerComponent -1.0 /16.0 ) +return 2 * DSCInputBitPerComponent -1.0 /16.0 ; +else +return dml_floor (16 * DecimalBPP,1 ) /16.0 ; + }else { +if (DecimalBPP <7 + || DesiredBPP <7 + || DesiredBPP >2 * DSCInputBitPerComponent -1.0 /16.0 + || DecimalBPP < DesiredBPP) { +return BPP_INVALID ; + }else { +return DesiredBPP; + } + } }else { -if (DecimalBPP <8 ) -return BPP_INVALID ; -else if (DecimalBPP >=3 * DSCInputBitPerComponent -1 /16 ) -return 3 * DSCInputBitPerComponent -1 /16 ; -else -return dml_floor (16 * DecimalBPP,1 ) /16 ; +if (DesiredBPP ==0 ) { +if (DecimalBPP <8 ) +return BPP_INVALID ; +else if (DecimalBPP >=3 * DSCInputBitPerComponent -1.0 /16.0 ) +return 3 * DSCInputBitPerComponent -1.0 /16.0 ; +else +return dml_floor (16 * DecimalBPP,1 ) /16.0 ; + }else { +if (DecimalBPP <8 + || DesiredBPP <8 + || DesiredBPP >3 * DSCInputBitPerComponent -1.0 /16.0 + || DecimalBPP < DesiredBPP) { +return BPP_INVALID ; + }else { +return DesiredBPP; + } + } } }else if (Format == dm_420) { -if (DecimalBPP >=18 ) +if (DecimalBPP >=18 && (DesiredBPP ==0 || DesiredBPP ==18 ))return 18 ; -else if (DecimalBPP >=15 ) +else if (DecimalBPP >=15 && (DesiredBPP ==0 || DesiredBPP ==15 ))return 15 ; -else if (DecimalBPP >=12 ) +else if (DecimalBPP >=12 && (DesiredBPP ==0 || DesiredBPP ==12 ))return 12 ;else return BPP_INVALID ; }else if (Format == dm_s422 || Format == dm_n422) { -if (DecimalBPP >=24 ) +if (DecimalBPP >=24 && (DesiredBPP ==0 || DesiredBPP ==24 ))return 24 ; -else if (DecimalBPP >=20 ) +else if (DecimalBPP >=20 && (DesiredBPP ==0 || DesiredBPP ==20 ))return 20 ; -else if (DecimalBPP >=16 ) +else if (DecimalBPP >=16 && (DesiredBPP ==0 || DesiredBPP ==16 ))return 16 ;else return BPP_INVALID ; }else { -if (DecimalBPP >=36 ) +if (DecimalBPP >=36 && (DesiredBPP ==0 || DesiredBPP ==36 ))return 36 ; -else if (DecimalBPP >=30 ) +else if (DecimalBPP >=30 && (DesiredBPP ==0 || DesiredBPP ==30 ))return 30 ; -else if (DecimalBPP >=24 ) +else if (DecimalBPP >=24 && (DesiredBPP ==0 || DesiredBPP ==24 ))return 24 ; -else if (DecimalBPP >=18 ) +else if (DecimalBPP >=18 && (DesiredBPP ==0 || DesiredBPP ==18 ))return 18 ;else return BPP_INVALID ;
@@ -4137,6 +4171,7 @@ void dml20v2_ModeSupportAndSystemConfigurationFull(struct display_mode_lib *mode locals->RequiresFEC[i][k] =0 ; locals->OutputBppPerState[i][k] = TruncToValidBPP( dml_min(600.0, mode_lib->vba.PHYCLKPerState[i]) / mode_lib->vba.PixelClockBackEnd[k] * 24, + mode_lib->vba.ForcedOutputLinkBPP[k], false, mode_lib->vba.Output[k], mode_lib->vba.OutputFormat[k],
@@ -4153,6 +4188,7 @@ void dml20v2_ModeSupportAndSystemConfigurationFull(struct display_mode_lib *mode mode_lib->vba.Outbpp = TruncToValidBPP( (1.0 - mode_lib->vba.Downspreading / 100.0) * 270.0 * mode_lib->vba.OutputLinkDPLanes[k] / mode_lib->vba.PixelClockBackEnd[k] * 8.0, + mode_lib->vba.ForcedOutputLinkBPP[k], false, mode_lib->vba.Output[k], mode_lib->vba.OutputFormat[k],
@@ -4160,6 +4196,7 @@ void dml20v2_ModeSupportAndSystemConfigurationFull(struct display_mode_lib *mode mode_lib->vba.OutbppDSC = TruncToValidBPP( (1.0 - mode_lib->vba.Downspreading / 100.0) * (1.0 - mode_lib->vba.EffectiveFECOverhead / 100.0) * 270.0 * mode_lib->vba.OutputLinkDPLanes[k] / mode_lib->vba.PixelClockBackEnd[k] * 8.0, + mode_lib->vba.ForcedOutputLinkBPP[k], true, mode_lib->vba.Output[k], mode_lib->vba.OutputFormat[k],
@@ -4182,6 +4219,7 @@ void dml20v2_ModeSupportAndSystemConfigurationFull(struct display_mode_lib *mode mode_lib->vba.Outbpp = TruncToValidBPP( (1.0 - mode_lib->vba.Downspreading / 100.0) * 540.0 * mode_lib->vba.OutputLinkDPLanes[k] / mode_lib->vba.PixelClockBackEnd[k] * 8.0, + mode_lib->vba.ForcedOutputLinkBPP[k], false, mode_lib->vba.Output[k], mode_lib->vba.OutputFormat[k],
@@ -4189,6 +4227,7 @@ void dml20v2_ModeSupportAndSystemConfigurationFull(struct display_mode_lib *mode mode_lib->vba.OutbppDSC = TruncToValidBPP( (1.0 - mode_lib->vba.Downspreading / 100.0) * (1.0 - mode_lib->vba.EffectiveFECOverhead / 100.0) * 540.0 * mode_lib->vba.OutputLinkDPLanes[k] / mode_lib->vba.PixelClockBackEnd[k] * 8.0, + mode_lib->vba.ForcedOutputLinkBPP[k], true, mode_lib->vba.Output[k], mode_lib->vba.OutputFormat[k],
@@ -4213,6 +4252,7 @@ void dml20v2_ModeSupportAndSystemConfigurationFull(struct display_mode_lib *mode mode_lib->vba.Outbpp = TruncToValidBPP( (1.0 - mode_lib->vba.Downspreading / 100.0) * 810.0 * mode_lib->vba.OutputLinkDPLanes[k] / mode_lib->vba.PixelClockBackEnd[k] * 8.0, + mode_lib->vba.ForcedOutputLinkBPP[k], false, mode_lib->vba.Output[k], mode_lib->vba.OutputFormat[k],
@@ -4220,6 +4260,7 @@ void dml20v2_ModeSupportAndSystemConfigurationFull(struct display_mode_lib *mode mode_lib->vba.OutbppDSC = TruncToValidBPP( (1.0 - mode_lib->vba.Downspreading / 100.0) * (1.0 - mode_lib->vba.EffectiveFECOverhead / 100.0) * 810.0 * mode_lib->vba.OutputLinkDPLanes[k] / mode_lib->vba.PixelClockBackEnd[k] * 8.0, + mode_lib->vba.ForcedOutputLinkBPP[k], true, mode_lib->vba.Output[k], mode_lib->vba.OutputFormat[k],
Signature · 6 lines
2.25.1 _______________________________________________ amd-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/amd-gfx
PATCH 13/16 drm/amd/display: Allow PSTATE chnage when no displays are enabled
In reply to Anson JacobFrom: Aric Cyr <[email protected]>
[Why]
When no displays are currently enabled, display driver should not disallow PSTATE switching.
[How]
Allow PSTATE switching if either the active configuration supports it, or there are no active displays.
--- .../gpu/drm/amd/display/dc/clk_mgr/dcn30/dcn30_clk_mgr.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)
drivers/gpu/drm/amd/display/dc/clk_mgr/dcn30/dcn30_clk_mgr.c +4 -2
@@ -251,6 +251,7 @@ static void dcn3_update_clocks(struct clk_mgr *clk_mgr_base,struct dmcu *dmcu = clk_mgr_base->ctx->dc->res_pool->dmcu;bool force_reset = false;bool update_uclk = false; +bool p_state_change_support;if (dc->work_arounds.skip_clock_update || !clk_mgr->smu_present)return ;
@@ -291,8 +292,9 @@ static void dcn3_update_clocks(struct clk_mgr *clk_mgr_base, clk_mgr_base->clks.socclk_khz = new_clocks->socclk_khz; clk_mgr_base->clks.prev_p_state_change_support = clk_mgr_base->clks.p_state_change_support; -if (should_update_pstate_support (safe_to_lower, new_clocks->p_state_change_support, clk_mgr_base->clks.p_state_change_support)) { - clk_mgr_base->clks.p_state_change_support = new_clocks->p_state_change_support; + p_state_change_support = new_clocks->p_state_change_support || (display_count ==0 ); +if (should_update_pstate_support (safe_to_lower, p_state_change_support, clk_mgr_base->clks.p_state_change_support)) { + clk_mgr_base->clks.p_state_change_support = p_state_change_support;/* to disable P-State switching, set UCLK min = max */ if (!clk_mgr_base->clks.p_state_change_support)
Signature · 6 lines
2.25.1 _______________________________________________ amd-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/amd-gfx
PATCH 14/16 drm/amd/display: Update dram_clock_change_latency for DCN2.1
In reply to Anson JacobFrom: Jake Wang <[email protected]>
[WHY]
dram clock change latencies get updated using ddr4 latency table, but that update does not happen before validation. This value should not be the default and should be number received from df for better mode support.
This may cause a PState hang on high refresh panels with short vblanks such as on 1080p 360hz or 300hz panels.
[HOW]
Update latency from 23.84 to 11.72.
--- drivers/gpu/drm/amd/display/dc/dcn21/dcn21_resource.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/gpu/drm/amd/display/dc/dcn21/dcn21_resource.c +1 -1
@@ -296,7 +296,7 @@ struct _vcs_dpi_soc_bounding_box_st dcn2_1_soc = { .num_banks = 8, .num_chans = 4, .vmm_page_size_bytes = 4096, - .dram_clock_change_latency_us = 23.84, + .dram_clock_change_latency_us = 11.72, .return_bus_width_bytes = 64, .dispclk_dppclk_vco_speed_mhz = 3600, .xfc_bus_transport_time_us = 4,
Signature · 6 lines
2.25.1 _______________________________________________ amd-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/amd-gfx
PATCH 15/16 drm/amd/display: [FW Promotion] Release 0.0.48
In reply to Anson JacobFrom: Anthony Koo <[email protected]>
--- drivers/gpu/drm/amd/display/dmub/inc/dmub_cmd.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/gpu/drm/amd/display/dmub/inc/dmub_cmd.h +2 -2
@@ -47,10 +47,10 @@/* Firmware versioning. */ #ifdef DMUB_EXPOSE_VERSION -#define DMUB_FW_VERSION_GIT_HASH 0xf51b86a +#define DMUB_FW_VERSION_GIT_HASH 0xf09c02ae3#define DMUB_FW_VERSION_MAJOR 0#define DMUB_FW_VERSION_MINOR 0 -#define DMUB_FW_VERSION_REVISION 47 +#define DMUB_FW_VERSION_REVISION 48#define DMUB_FW_VERSION_TEST 0#define DMUB_FW_VERSION_VBIOS 0#define DMUB_FW_VERSION_HOTFIX 0
Signature · 6 lines
2.25.1 _______________________________________________ amd-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/amd-gfx
PATCH 16/16 drm/amd/display: 3.2.119
In reply to Anson JacobFrom: Aric Cyr <[email protected]>
--- drivers/gpu/drm/amd/display/dc/dc.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/gpu/drm/amd/display/dc/dc.h +1 -1
@@ -42,7 +42,7 @@#include "inc/hw/dmcu.h" #include "dml/display_mode_lib.h" -#define DC_VER "3.2.118" +#define DC_VER "3.2.119"#define MAX_SURFACES 3#define MAX_PLANES 6
Signature · 6 lines
2.25.1 _______________________________________________ amd-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/amd-gfx
Re: [PATCH 16/16] drm/amd/display: 3.2.119
Dear Anson, dear Aric,
Am 15.01.21 um 18:27 schrieb Anson Jacob:
Quoted 8 lines
From: Aric Cyr <[email protected]>
Signed-off-by Aric Cyr <[email protected]>Reviewed-by Aric Cyr <[email protected]>Acked-by Anson Jacob <[email protected]>--- drivers/gpu/drm/amd/display/dc/dc.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
[…]
I think, I ask for this in the past, but could you please write understandable commit messages? Having a number as the summary leaves a lot of room for improvement.
Kind regards,
Paul
_______________________________________________
amd-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/amd-gfx
[AMD Public Use]
Hi all,
I tested this patch on Navi10 and a Renoir laptop (HP Envy 360 with Ryzen 5 4500U).
Tested the laptop with its internal 1080p display and externally with USB-C to DP, USB-C to HDMI, USB- C to VGA, and USB-C to DVI to 2x 4k60 displays, 1x 1440p 144hz display, and one 1680x1050 display. Also tested using an MST hub with 1x 4k30 and 1x1440p 1444hz.
I did note a headless boot issue with Navi10 that I hadn't tested before, and some HDCP issues on Renoir that don't affect it's functionality.
Thank you,
Dan Wheeler
Technologist | AMD
SW Display
O +(1) 905-882-2600 ext. 74665
------------------------------------------------------------------------------------------------------------------
1 Commerce Valley Dr E, Thornhill, ON L3T 7X6
Facebook | Twitter | amd.com
-----Original Message-----
From: amd-gfx <[email protected]> On Behalf Of Anson Jacob
Sent: January 15, 2021 12:27 PM
To: [email protected]
Cc: Brol, Eryk <[email protected]>; Li, Sun peng (Leo) <[email protected]>; Wentland, Harry <[email protected]>; Zhuo, Qingqing <[email protected]>; Siqueira, Rodrigo <[email protected]>; Jacob, Anson <[email protected]>; Pillai, Aurabindo <[email protected]>; Lakha, Bhawanpreet <[email protected]>; R, Bindu <[email protected]>
Subject: [PATCH 00/16] DC Patches January 15, 2020
This DC patchset brings improvements in multiple areas.
Anthony Koo (1):
drm/amd/display: [FW Promotion] Release 0.0.48
Aric Cyr (2):
drm/amd/display: Allow PSTATE chnage when no displays are enabled drm/amd/display: 3.2.119
Bing Guo (2):
drm/amd/display: Change function decide_dp_link_settings to avoid
infinite looping
drm/amd/display: Fix dml20v2_ModeSupportAndSystemConfigurationFull()
to check DesiredBPP.
George Shen (1):
drm/amd/display: Log link/connector info provided in BIOS object table
Jake Wang (1):
drm/amd/display: Update dram_clock_change_latency for DCN2.1
Mike Hsieh (1):
drm/amd/display: disable FEC while using eDP
Nicholas Kazlauskas (4):
drm/amd/display: Use hardware sequencer functions for PG control drm/amd/display: Allow dmub srv hardware reset before HW init drm/amd/display: Guard against NULL pointer deref when get_i2c_info
fails
drm/amd/display: Fix reset sequence with driver direct DMCUB fw load
Stylon Wang (1):
drm/amd/display: Report Freesync to vrr_range debugfs entry in DRM
Sung Lee (1):
drm/amd/display: DCN2X Find Secondary Pipe properly in MPO + ODM Case
Vladimir Stempen (1):
drm/amd/display: Fixed corruptions on HPDRX link loss restore
Wyatt Wood (1):
drm/amd/display: Allow dmu_stg to support cached inbox for dmub
.../gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 4 + .../display/dc/clk_mgr/dcn30/dcn30_clk_mgr.c | 6 +- drivers/gpu/drm/amd/display/dc/core/dc.c | 6 + drivers/gpu/drm/amd/display/dc/core/dc_link.c | 28 ++++- .../gpu/drm/amd/display/dc/core/dc_link_ddc.c | 6 + .../gpu/drm/amd/display/dc/core/dc_link_dp.c | 7 +- drivers/gpu/drm/amd/display/dc/dc.h | 2 +- .../amd/display/dc/dcn10/dcn10_hw_sequencer.c | 18 ++- .../drm/amd/display/dc/dcn20/dcn20_hwseq.c | 9 +- .../drm/amd/display/dc/dcn20/dcn20_resource.c | 7 +- .../drm/amd/display/dc/dcn21/dcn21_resource.c | 2 +- .../dc/dml/dcn20/display_mode_vba_20v2.c | 117 ++++++++++++------ .../gpu/drm/amd/display/dmub/inc/dmub_cmd.h | 4 +- .../gpu/drm/amd/display/dmub/src/dmub_dcn20.c | 11 +- .../gpu/drm/amd/display/dmub/src/dmub_srv.c | 9 +- 15 files changed, 171 insertions(+), 65 deletions(-)
Signature · 10 lines
2.25.1 _______________________________________________ amd-gfx mailing list [email protected] https://nam11.safelinks.protection.outlook.com/?url=https%3A%2F%2Flists.freedesktop.org%2Fmailman%2Flistinfo%2Famd-gfx&data=04%7C01%7Cdaniel.wheeler%40amd.com%7Cb065e874864344b4d28d08d8b97ae6b6%7C3dd8961fe4884e608e11a82d994e183d%7C0%7C0%7C637463284804293550%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=rFljM2OjzTVFZyXGFdGBV1gq5MHrXvcTHMCpoj2jpac%3D&reserved=0 _______________________________________________ amd-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/amd-gfx