net: phy: micrel: Try default PHY ofnode first
Subsystems (2)
PATCH 1/1 net: phy: micrel: Try default PHY ofnode first
The phydev structure has a PHY OF node pointer in it, use that OF node first when looking up PHY OF node properties, since that is likely the correct PHY OF node pointer. If the pointer is not valid, which is the case e.g. on legacy DTs, fall back to parsing MAC ethernet-phy subnode.
Signed-off-by Marek Vasut <[email protected]>
Cc Joe Hershberger <[email protected]>
Cc Ramon Fried <[email protected]>
--- drivers/net/phy/micrel_ksz90x1.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-)
drivers/net/phy/micrel_ksz90x1.c +7 -2
@@ -120,8 +120,13 @@ static int ksz90x1_of_config_group(struct phy_device *phydev,if (!drv || !drv->writeext)return -EOPNOTSUPP ; -/* Look for a PHY node under the Ethernet node */ - node =dev_read_subnode (dev,"ethernet-phy" ); + node = phydev->node; + +if (!ofnode_valid (node)) { +/* Look for a PHY node under the Ethernet node */ + node =dev_read_subnode (dev,"ethernet-phy" ); + } +if (!ofnode_valid (node)) {/* No node found, look in the Ethernet node */ node =dev_ofnode (dev);
Signature · 1 line
2.29.2
PATCH 1/1 net: phy: micrel: Try default PHY ofnode first
Quoted 8 lines · Marek Vasut
The phydev structure has a PHY OF node pointer in it, use that OF node first when looking up PHY OF node properties, since that is likely the correct PHY OF node pointer. If the pointer is not valid, which is the case e.g. on legacy DTs, fall back to parsing MAC ethernet-phy subnode.
Signed-off-by Marek Vasut <[email protected]>Cc Joe Hershberger <[email protected]>Cc Ramon Fried <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 659 bytes Desc: not available URL: <https://lists.denx.de/pipermail/u-boot/attachments/20210127/6315928e/attachment.sig>