ASoC: rt5682: remove LDO2 power supply widget
Subsystems (3)
PATCH 1/1 ASoC: rt5682: remove LDO2 power supply widget
From: Shuming Fan <[email protected]>
The application circuit shall provide MICVDD power.
Hence, the codec driver doesn't need to enable LDO2.
This patch also reduces power consumption while the recording from the headset.
Signed-off-by Shuming Fan <[email protected]>
--- sound/soc/codecs/rt5682.c | 4 ---- 1 file changed, 4 deletions(-)
sound/soc/codecs/rt5682.c +0 -4
@@ -1630,8 +1630,6 @@ static const struct snd_kcontrol_new rt5682_adcdat_pin_ctrl =SOC_DAPM_ENUM ("ADCDAT" , rt5682_adcdat_pin_enum);static const struct snd_soc_dapm_widget rt5682_dapm_widgets[] = { -SND_SOC_DAPM_SUPPLY ("LDO2" ,RT5682_PWR_ANLG_3 ,RT5682_PWR_LDO2_BIT , -0 ,NULL ,0 ),SND_SOC_DAPM_SUPPLY ("PLL1" ,RT5682_PWR_ANLG_3 ,RT5682_PWR_PLL_BIT ,0 ,NULL ,0 ), SND_SOC_DAPM_SUPPLY("PLL2B", RT5682_PWR_ANLG_3, RT5682_PWR_PLL2B_BIT,
@@ -1854,8 +1852,6 @@ static const struct snd_soc_dapm_route rt5682_dapm_routes[] = { {"CLKDET SYS", NULL, "CLKDET"}, - {"IN1P", NULL, "LDO2"}, - {"BST1 CBJ", NULL, "IN1P"}, {"RECMIX1L", "CBJ Switch", "BST1 CBJ"},
Signature · 1 line
2.29.0
Mark Brown
maintainerQuoted 5 lines · On Tue, Jan 19, 2021 at 05:11:58PM +0800, [email protected] wrote:
From: Shuming Fan <[email protected]>
The application circuit shall provide MICVDD power.
Hence, the codec driver doesn't need to enable LDO2.
This patch also reduces power consumption while the recording from the headset.
This sounds very board specific - shouldn't this be something configured by the platform? Having a default that doesn't use the LDO is fine but some platforms could reasonably use the LDO that's there.