Skip to contentSkip to conversation

km/kirkwood: enable USB support and the host controller driver

PATCH New Holger Brunck 3 participants 3 messages Nov 3, 2020 – Jan 19, 2021

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 km/kirkwood: enable USB support and the host controller driver

Our kirkwood device embeds a USB host controller that is now used on some boards. This enables the support of USB and the corresponding driver.

---
 board/keymile/km_arm/Kconfig | 4 ++++
 1 file changed, 4 insertions(+)
board/keymile/km_arm/Kconfig +4 -0
index 4b21db8573..6f55cfab86 100644
@@ -58,8 +58,12 @@ config BOARD_SPECIFIC_OPTIONS # dummy
 	select DM_SERIAL
 	select DM_SPI
 	select DM_SPI_FLASH
+	select USB
+	select USB_EHCI_HCD
+	select USB_EHCI_MARVELL
 	imply CMD_CRAMFS
 	imply CMD_DIAG
 	imply FS_CRAMFS
+	imply CMD_USB
 
 endif
Signature · 1 line
2.26.0
#2 lore raw

PATCH 1/1 km/kirkwood: enable USB support and the host controller driver

In reply to Holger Brunck
Quoted 7 lines · Holger Brunck

Our kirkwood device embeds a USB host controller that is now used on some boards. This enables the support of USB and the corresponding driver.

Applied to u-boot/master, thanks!

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 659 bytes
Desc: not available
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20210119/6d7359c6/attachment.sig>