Skip to contentSkip to conversation

doc: board: freescale: advise to use newer atf and firmware

PATCH New Andrey Zhizhikin 4 participants 7 messages Dec 13, 2020 – Jan 19, 2021 Arm i.MX and Layerscape

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 doc: board: freescale: advise to use newer atf and firmware

Update branch and version information of ATF and DDR firmware files to point to latest releases provided by NXP.

This is especially critical for imx8mp evk, as the ATF support for that SoC is only available in latest releases.

Align all SoCs from imx8m family to use identical revisions of ATF and DDR firmware.

---
 doc/board/freescale/imx8mm_evk.rst | 10 +++++-----
 doc/board/freescale/imx8mn_evk.rst | 10 +++++-----
 doc/board/freescale/imx8mp_evk.rst | 16 ++++++++--------
 doc/board/freescale/imx8mq_evk.rst | 12 ++++++------
 4 files changed, 24 insertions(+), 24 deletions(-)
doc/board/freescale/imx8mm_evk.rst +5 -5
index f75190227c..a9ccdb7850 100644
@@ -18,7 +18,7 @@ Get and Build the ARM Trusted firmware
 
 Note: builddir is U-Boot build directory (source directory for in-tree builds)
 Get ATF from: https://source.codeaurora.org/external/imx/imx-atf
-branch: imx_4.19.35_1.0.0
+branch: imx_5.4.47_2.2.0
 
 .. code-block:: bash
 
@@ -30,10 +30,10 @@ Get the ddr firmware
 
 .. code-block:: bash
 
-   $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.0.bin
-   $ chmod +x firmware-imx-8.0.bin
-   $ ./firmware-imx-8.0
-   $ cp firmware-imx-8.0/firmware/ddr/synopsys/lpddr4*.bin $(builddir)
+   $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.9.bin
+   $ chmod +x firmware-imx-8.9.bin
+   $ ./firmware-imx-8.9
+   $ cp firmware-imx-8.9/firmware/ddr/synopsys/lpddr4*.bin $(builddir)
 
 Build U-Boot
 ------------
doc/board/freescale/imx8mn_evk.rst +5 -5
index c3e92cecee..375e0bb761 100644
@@ -18,7 +18,7 @@ Get and Build the ARM Trusted firmware
 
 Note: srctree is U-Boot source directory
 Get ATF from: https://source.codeaurora.org/external/imx/imx-atf
-branch: imx_4.19.35_1.1.0
+branch: imx_5.4.47_2.2.0
 
 .. code-block:: bash
 
@@ -30,10 +30,10 @@ Get the ddr firmware
 
 .. code-block:: bash
 
-   $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.5.bin
-   $ chmod +x firmware-imx-8.5.bin
-   $ ./firmware-imx-8.5
-   $ cp firmware-imx-8.5/firmware/ddr/synopsys/ddr4*.bin $(srctree)
+   $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.9.bin
+   $ chmod +x firmware-imx-8.9.bin
+   $ ./firmware-imx-8.9
+   $ cp firmware-imx-8.9/firmware/ddr/synopsys/ddr4*.bin $(srctree)
 
 Build U-Boot
 ------------
doc/board/freescale/imx8mp_evk.rst +8 -8
index 96df6d470f..ccffcf7257 100644
@@ -18,7 +18,7 @@ Get and Build the ARM Trusted firmware
 
 Note: $(srctree) is the U-Boot source directory
 Get ATF from: https://source.codeaurora.org/external/imx/imx-atf
-branch: imx_5.4.3_2.0.0
+branch: imx_5.4.47_2.2.0
 
 .. code-block:: bash
 
@@ -30,13 +30,13 @@ Get the ddr firmware
 
 .. code-block:: bash
 
-   $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.7.bin
-   $ chmod +x firmware-imx-8.7.bin
-   $ ./firmware-imx-8.7.bin
-   $ cp firmware-imx-8.7/firmware/ddr/synopsys/lpddr4_pmu_train_1d_dmem_201904.bin $(srctree)/lpddr4_pmu_train_1d_dmem.bin
-   $ cp firmware-imx-8.7/firmware/ddr/synopsys/lpddr4_pmu_train_1d_imem_201904.bin $(srctree)/lpddr4_pmu_train_1d_imem.bin
-   $ cp firmware-imx-8.7/firmware/ddr/synopsys/lpddr4_pmu_train_2d_dmem_201904.bin $(srctree)/lpddr4_pmu_train_2d_dmem.bin
-   $ cp firmware-imx-8.7/firmware/ddr/synopsys/lpddr4_pmu_train_2d_imem_201904.bin $(srctree)/lpddr4_pmu_train_2d_imem.bin
+   $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.9.bin
+   $ chmod +x firmware-imx-8.9.bin
+   $ ./firmware-imx-8.9.bin
+   $ cp firmware-imx-8.9/firmware/ddr/synopsys/lpddr4_pmu_train_1d_dmem_201904.bin $(srctree)/lpddr4_pmu_train_1d_dmem.bin
+   $ cp firmware-imx-8.9/firmware/ddr/synopsys/lpddr4_pmu_train_1d_imem_201904.bin $(srctree)/lpddr4_pmu_train_1d_imem.bin
+   $ cp firmware-imx-8.9/firmware/ddr/synopsys/lpddr4_pmu_train_2d_dmem_201904.bin $(srctree)/lpddr4_pmu_train_2d_dmem.bin
+   $ cp firmware-imx-8.9/firmware/ddr/synopsys/lpddr4_pmu_train_2d_imem_201904.bin $(srctree)/lpddr4_pmu_train_2d_imem.bin
 
 Build U-Boot
 ------------
doc/board/freescale/imx8mq_evk.rst +6 -6
index 0a64ecc5ba..c269fdebe3 100644
@@ -18,7 +18,7 @@ Get and Build the ARM Trusted firmware
 
 Note: srctree is U-Boot source directory
 Get ATF from: https://source.codeaurora.org/external/imx/imx-atf
-branch: imx_4.19.35_1.0.0
+branch: imx_5.4.47_2.2.0
 
 .. code-block:: bash
 
@@ -30,11 +30,11 @@ Get the ddr and hdmi firmware
 
 .. code-block:: bash
 
-   $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-7.9.bin
-   $ chmod +x firmware-imx-7.9.bin
-   $ ./firmware-imx-7.9.bin
-   $ cp firmware-imx-7.9/firmware/hdmi/cadence/signed_hdmi_imx8m.bin $(builddir)
-   $ cp firmware-imx-7.9/firmware/ddr/synopsys/lpddr4*.bin $(builddir)
+   $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.9.bin
+   $ chmod +x firmware-imx-8.9.bin
+   $ ./firmware-imx-8.9.bin
+   $ cp firmware-imx-8.9/firmware/hdmi/cadence/signed_hdmi_imx8m.bin $(builddir)
+   $ cp firmware-imx-8.9/firmware/ddr/synopsys/lpddr4*.bin $(builddir)
 
 Build U-Boot
 ------------
Signature · 1 line
2.17.1
reviewer
#1 lore raw

PATCH 1/1 doc: board: freescale: advise to use newer atf and firmware

Hi Andrey,

Quoted 11 lines · Andrey Zhizhikin

Update branch and version information of ATF and DDR firmware files to point to latest releases provided by NXP.

This is especially critical for imx8mp evk, as the ATF support for that SoC is only available in latest releases.

Align all SoCs from imx8m family to use identical revisions of ATF and DDR firmware.

#2 lore raw

PATCH 1/1 doc: board: freescale: advise to use newer atf and firmware

Quoted 11 lines · Fabio Estevam

Hi Andrey,

Quoted 7 lines · Andrey Zhizhikin

Update branch and version information of ATF and DDR firmware files to point to latest releases provided by NXP.

This is especially critical for imx8mp evk, as the ATF support for that SoC is only available in latest releases.

Quoted 6 lines
Quoted 4 lines

Align all SoCs from imx8m family to use identical revisions of ATF and DDR firmware.

Is this something that should get pulled in for v2021.01? It kinda sounds like yes. Should I take this directly if so?

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 659 bytes
Desc: not available
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20201221/0e9427c2/attachment.sig>
#3 lore raw

PATCH 1/1 doc: board: freescale: advise to use newer atf and firmware

Hello Tom,

Quoted 23 lines

-----Original Message-----
From: Tom Rini <[email protected]>
Sent: Monday, December 21, 2020 10:41 PM
To: Fabio Estevam <[email protected]>; Stefano Babic <[email protected]>
Cc: ZHIZHIKIN Andrey <[email protected]>; U-Boot-Denx <[email protected]>; Peng Fan <[email protected]>
Subject: Re: [PATCH] doc: board: freescale: advise to use newer atf and firmware

Quoted 14 lines · Fabio Estevam

Hi Andrey,

Quoted 10 lines · Andrey Zhizhikin

Update branch and version information of ATF and DDR firmware files to point to latest releases provided by NXP.

This is especially critical for imx8mp evk, as the ATF support for that SoC is only available in latest releases.

Align all SoCs from imx8m family to use identical revisions of ATF and DDR firmware.

Quoted 7 lines
Quoted 4 lines
Quoted 2 lines

Signed-off-by: Andrey Zhizhikin
<[email protected]>

Is this something that should get pulled in for v2021.01? It kinda sounds like yes. Should I take this directly if so?

I'd suggest this docs update to be taken, as the combination of ATF and DDR firmware recorded there is known to be working for those i.MX8M derivatives.

I've also realized that there is a newer version of ATF available from NXP on codeaurora, but according to the last mail from Fabio - it is not bootable, and I haven't tried it myself yet.

I guess for the upcoming 2021.01 this documentation update would be quite helpful, as there has been few reports on the list that people tried to use outdated instructions and were not able to produce a boot container for i.MX8M Nano and Plus SOCs due to a newer version of ATF was required.

Quoted 3 lines

--
Tom

-- andrey

reviewer
#4 lore raw

PATCH 1/1 doc: board: freescale: advise to use newer atf and firmware

In reply to Tom Rini

Hi Tom,

Quoted 2 lines · Tom Rini

Is this something that should get pulled in for v2021.01? It kinda sounds like yes. Should I take this directly if so?

Yes, it would be nice to have this pulled in for v2021.01.

Thanks

#5 lore raw

PATCH 1/1 doc: board: freescale: advise to use newer atf and firmware

In reply to Andrey Zhizhikin
Quoted 5 lines

Subject: [PATCH] doc: board: freescale: advise to use newer atf and firmware

Update branch and version information of ATF and DDR firmware files to point to latest releases provided by NXP.

Quoted 7 lines

This is especially critical for imx8mp evk, as the ATF support for that SoC is only available in latest releases.

Align all SoCs from imx8m family to use identical revisions of ATF and DDR firmware.

Thanks for the effort.

Quoted 236 lines
---
 doc/board/freescale/imx8mm_evk.rst | 10 +++++-----
doc/board/freescale/imx8mn_evk.rst | 10 +++++-----
doc/board/freescale/imx8mp_evk.rst | 16 ++++++++--------
doc/board/freescale/imx8mq_evk.rst | 12 ++++++------
 4 files changed, 24 insertions(+), 24 deletions(-)
doc/board/freescale/imx8mm_evk.rst +0 -0
index f75190227c..a9ccdb7850 100644
@@ -18,7 +18,7 @@ Get and Build the ARM Trusted firmware
 
 Note: builddir is U-Boot build directory (source directory for in-tree builds)

Get ATF from:
https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fsource
.codeaurora.org%2Fexternal%2Fimx%2Fimx-atf&amp;data=04%7C01%7Cpen g.fan%40nxp.com%7C17ea116c2ca44f3ee06008d89fa6bf7d%7C686ea1d3bc 2b4c6fa92cd99c5c301635%7C0%7C0%7C637434885818043019%7CUnknow n%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1ha WwiLCJXVCI6Mn0%3D%7C1000&amp;sdata=JB5DHy0ymYFYB3JN4J%2FWS3 WNBtwIIi7Zj0uNgu793fc%3D&amp;reserved=0

doc/board/freescale/imx8mm_evk.rst +1 -2
-branch: imx_4.19.35_1.0.0
+branch: imx_5.4.47_2.2.0
 
 .. code-block:: bash
@@ -30,10 +30,10 @@ Get the ddr firmware
 
 .. code-block:: bash
 
-   $ wget

https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.
nxp.com%2Flgfiles%2FNMG%2FMAD%2FYOCTO%2Ffirmware-imx-8.0.bin&a mp;data=04%7C01%7Cpeng.fan%40nxp.com%7C17ea116c2ca44f3ee06008d 89fa6bf7d%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C0%7C6374348 85818043019%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJ QIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&amp;sdata=TsZF LW7w5c2tOeaB9kK5RC5V9%2BvvTfMTI7fidA1kH%2Bc%3D&amp;reserved=0

doc/board/freescale/imx8mm_evk.rst +1 -3
-   $ chmod +x firmware-imx-8.0.bin
-   $ ./firmware-imx-8.0
-   $ cp firmware-imx-8.0/firmware/ddr/synopsys/lpddr4*.bin $(builddir)
+   $ wget

https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.
nxp.com%2Flgfiles%2FNMG%2FMAD%2FYOCTO%2Ffirmware-imx-8.9.bin&a mp;data=04%7C01%7Cpeng.fan%40nxp.com%7C17ea116c2ca44f3ee06008d 89fa6bf7d%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C0%7C6374348 85818043019%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJ QIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&amp;sdata=5vP4 2YnY58cCWV5cIc3X8eQJ%2F%2FACKikIrRxPXjaweSQ%3D&amp;reserved=0

doc/board/freescale/imx8mm_evk.rst +3 -0
+   $ chmod +x firmware-imx-8.9.bin
+   $ ./firmware-imx-8.9
+   $ cp firmware-imx-8.9/firmware/ddr/synopsys/lpddr4*.bin $(builddir)
 
 Build U-Boot
 ------------
doc/board/freescale/imx8mn_evk.rst +0 -0
index c3e92cecee..375e0bb761 100644
@@ -18,7 +18,7 @@ Get and Build the ARM Trusted firmware
 
 Note: srctree is U-Boot source directory  Get ATF from:

https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fsource
.codeaurora.org%2Fexternal%2Fimx%2Fimx-atf&amp;data=04%7C01%7Cpen g.fan%40nxp.com%7C17ea116c2ca44f3ee06008d89fa6bf7d%7C686ea1d3bc 2b4c6fa92cd99c5c301635%7C0%7C0%7C637434885818043019%7CUnknow n%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1ha WwiLCJXVCI6Mn0%3D%7C1000&amp;sdata=JB5DHy0ymYFYB3JN4J%2FWS3 WNBtwIIi7Zj0uNgu793fc%3D&amp;reserved=0

doc/board/freescale/imx8mn_evk.rst +1 -2
-branch: imx_4.19.35_1.1.0
+branch: imx_5.4.47_2.2.0
 
 .. code-block:: bash
@@ -30,10 +30,10 @@ Get the ddr firmware
 
 .. code-block:: bash
 
-   $ wget

https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.
nxp.com%2Flgfiles%2FNMG%2FMAD%2FYOCTO%2Ffirmware-imx-8.5.bin&a mp;data=04%7C01%7Cpeng.fan%40nxp.com%7C17ea116c2ca44f3ee06008d 89fa6bf7d%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C0%7C6374348 85818043019%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJ QIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&amp;sdata=2fTO 1XnVhcrXUIjNnP%2Bblgx7BB%2FuqUECFZjZeaPg9Xo%3D&amp;reserved=0

doc/board/freescale/imx8mn_evk.rst +1 -3
-   $ chmod +x firmware-imx-8.5.bin
-   $ ./firmware-imx-8.5
-   $ cp firmware-imx-8.5/firmware/ddr/synopsys/ddr4*.bin $(srctree)
+   $ wget

https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.
nxp.com%2Flgfiles%2FNMG%2FMAD%2FYOCTO%2Ffirmware-imx-8.9.bin&a mp;data=04%7C01%7Cpeng.fan%40nxp.com%7C17ea116c2ca44f3ee06008d 89fa6bf7d%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C0%7C6374348 85818043019%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJ QIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&amp;sdata=5vP4 2YnY58cCWV5cIc3X8eQJ%2F%2FACKikIrRxPXjaweSQ%3D&amp;reserved=0

doc/board/freescale/imx8mn_evk.rst +3 -0
+   $ chmod +x firmware-imx-8.9.bin
+   $ ./firmware-imx-8.9
+   $ cp firmware-imx-8.9/firmware/ddr/synopsys/ddr4*.bin $(srctree)
 
 Build U-Boot
 ------------
doc/board/freescale/imx8mp_evk.rst +0 -0
index 96df6d470f..ccffcf7257 100644
@@ -18,7 +18,7 @@ Get and Build the ARM Trusted firmware
 
 Note: $(srctree) is the U-Boot source directory  Get ATF from:

https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fsource
.codeaurora.org%2Fexternal%2Fimx%2Fimx-atf&amp;data=04%7C01%7Cpen g.fan%40nxp.com%7C17ea116c2ca44f3ee06008d89fa6bf7d%7C686ea1d3bc 2b4c6fa92cd99c5c301635%7C0%7C0%7C637434885818043019%7CUnknow n%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1ha WwiLCJXVCI6Mn0%3D%7C1000&amp;sdata=JB5DHy0ymYFYB3JN4J%2FWS3 WNBtwIIi7Zj0uNgu793fc%3D&amp;reserved=0

doc/board/freescale/imx8mp_evk.rst +1 -2
-branch: imx_5.4.3_2.0.0
+branch: imx_5.4.47_2.2.0
 
 .. code-block:: bash
@@ -30,13 +30,13 @@ Get the ddr firmware
 
 .. code-block:: bash
 
-   $ wget

https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.
nxp.com%2Flgfiles%2FNMG%2FMAD%2FYOCTO%2Ffirmware-imx-8.7.bin&a mp;data=04%7C01%7Cpeng.fan%40nxp.com%7C17ea116c2ca44f3ee06008d 89fa6bf7d%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C0%7C6374348 85818043019%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJ QIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&amp;sdata=gh07 U0uSMCibDEyXoaRxd%2Fb1c5gPTDWH7fveAMZWF8Q%3D&amp;reserved=0

doc/board/freescale/imx8mp_evk.rst +0 -3
-   $ chmod +x firmware-imx-8.7.bin
-   $ ./firmware-imx-8.7.bin
-   $ cp

firmware-imx-8.7/firmware/ddr/synopsys/lpddr4_pmu_train_1d_dmem_201 904.bin $(srctree)/lpddr4_pmu_train_1d_dmem.bin
- $ cp
firmware-imx-8.7/firmware/ddr/synopsys/lpddr4_pmu_train_1d_imem_2019 04.bin $(srctree)/lpddr4_pmu_train_1d_imem.bin
- $ cp
firmware-imx-8.7/firmware/ddr/synopsys/lpddr4_pmu_train_2d_dmem_201 904.bin $(srctree)/lpddr4_pmu_train_2d_dmem.bin
- $ cp
firmware-imx-8.7/firmware/ddr/synopsys/lpddr4_pmu_train_2d_imem_2019 04.bin $(srctree)/lpddr4_pmu_train_2d_imem.bin
+ $ wget
https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.
nxp.com%2Flgfiles%2FNMG%2FMAD%2FYOCTO%2Ffirmware-imx-8.9.bin&a mp;data=04%7C01%7Cpeng.fan%40nxp.com%7C17ea116c2ca44f3ee06008d 89fa6bf7d%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C0%7C6374348 85818043019%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJ QIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&amp;sdata=5vP4 2YnY58cCWV5cIc3X8eQJ%2F%2FACKikIrRxPXjaweSQ%3D&amp;reserved=0

doc/board/freescale/imx8mp_evk.rst +3 -0
+   $ chmod +x firmware-imx-8.9.bin
+   $ ./firmware-imx-8.9.bin
+   $ cp

firmware-imx-8.9/firmware/ddr/synopsys/lpddr4_pmu_train_1d_dmem_201 904.bin $(srctree)/lpddr4_pmu_train_1d_dmem.bin
+ $ cp
firmware-imx-8.9/firmware/ddr/synopsys/lpddr4_pmu_train_1d_imem_2019 04.bin $(srctree)/lpddr4_pmu_train_1d_imem.bin
+ $ cp
firmware-imx-8.9/firmware/ddr/synopsys/lpddr4_pmu_train_2d_dmem_201 904.bin $(srctree)/lpddr4_pmu_train_2d_dmem.bin

doc/board/freescale/imx8mp_evk.rst +2 -0
+   $ cp
+

firmware-imx-8.9/firmware/ddr/synopsys/lpddr4_pmu_train_2d_imem_2019 04
+ .bin $(srctree)/lpddr4_pmu_train_2d_imem.bin

Build U-Boot
------------

doc/board/freescale/imx8mq_evk.rst +0 -0
index 0a64ecc5ba..c269fdebe3 100644
@@ -18,7 +18,7 @@ Get and Build the ARM Trusted firmware
 
 Note: srctree is U-Boot source directory  Get ATF from:

https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fsource
.codeaurora.org%2Fexternal%2Fimx%2Fimx-atf&amp;data=04%7C01%7Cpen g.fan%40nxp.com%7C17ea116c2ca44f3ee06008d89fa6bf7d%7C686ea1d3bc 2b4c6fa92cd99c5c301635%7C0%7C0%7C637434885818043019%7CUnknow n%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1ha WwiLCJXVCI6Mn0%3D%7C1000&amp;sdata=JB5DHy0ymYFYB3JN4J%2FWS3 WNBtwIIi7Zj0uNgu793fc%3D&amp;reserved=0

doc/board/freescale/imx8mq_evk.rst +1 -2
-branch: imx_4.19.35_1.0.0
+branch: imx_5.4.47_2.2.0
 
 .. code-block:: bash
@@ -30,11 +30,11 @@ Get the ddr and hdmi firmware
 
 .. code-block:: bash
 
-   $ wget

https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.
nxp.com%2Flgfiles%2FNMG%2FMAD%2FYOCTO%2Ffirmware-imx-7.9.bin&a mp;data=04%7C01%7Cpeng.fan%40nxp.com%7C17ea116c2ca44f3ee06008d 89fa6bf7d%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C0%7C6374348 85818053014%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJ QIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&amp;sdata=PESa EwYork7GTo%2Fw8dqpB85yntYvhpu4R26bW40Au8U%3D&amp;reserved=0

doc/board/freescale/imx8mq_evk.rst +0 -3
-   $ chmod +x firmware-imx-7.9.bin
-   $ ./firmware-imx-7.9.bin
-   $ cp firmware-imx-7.9/firmware/hdmi/cadence/signed_hdmi_imx8m.bin

$(builddir)

doc/board/freescale/imx8mq_evk.rst +1 -1
-   $ cp firmware-imx-7.9/firmware/ddr/synopsys/lpddr4*.bin $(builddir)
+   $ wget

https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.
nxp.com%2Flgfiles%2FNMG%2FMAD%2FYOCTO%2Ffirmware-imx-8.9.bin&a mp;data=04%7C01%7Cpeng.fan%40nxp.com%7C17ea116c2ca44f3ee06008d 89fa6bf7d%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C0%7C6374348 85818053014%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJ QIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&amp;sdata=W1v eu%2BLnADW6VxKEMxai%2FFxQXfRibSIn%2B3mD0WnCtyA%3D&amp;reserv ed=0

doc/board/freescale/imx8mq_evk.rst +3 -0
+   $ chmod +x firmware-imx-8.9.bin
+   $ ./firmware-imx-8.9.bin
+   $ cp

firmware-imx-8.9/firmware/hdmi/cadence/signed_hdmi_imx8m.bin $(builddir)
+ $ cp firmware-imx-8.9/firmware/ddr/synopsys/lpddr4*.bin $(builddir)

Build U-Boot
------------
--
2.17.1

#6 lore raw

PATCH 1/1 doc: board: freescale: advise to use newer atf and firmware

In reply to Andrey Zhizhikin
Quoted 6 lines · Andrey Zhizhikin

Update branch and version information of ATF and DDR firmware files to point to latest releases provided by NXP.

This is especially critical for imx8mp evk, as the ATF support for that SoC is only available in latest releases.

Quoted 6 lines

Align all SoCs from imx8m family to use identical revisions of ATF and DDR firmware.

Applied to u-boot/master, thanks!

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 659 bytes
Desc: not available
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20210119/6f37a3bf/attachment.sig>