Input: remove sirfsoc power button driver
PATCH 1/1 Input: remove sirfsoc power button driver
From: Arnd Bergmann <[email protected]>
The CSR SiRF prima2/atlas platforms are getting removed, so this driver is no longer needed.
Cc Barry Song <[email protected]>
Signed-off-by Arnd Bergmann <[email protected]>
--- drivers/input/misc/Kconfig | 10 -- drivers/input/misc/Makefile | 1 - drivers/input/misc/sirfsoc-onkey.c | 207 ----------------------------- 3 files changed, 218 deletions(-) delete mode 100644 drivers/input/misc/sirfsoc-onkey.c
drivers/input/misc/Kconfig +0 -10
@@ -789,16 +789,6 @@ config INPUT_XEN_KBDDEV_FRONTEND To compile this driver as a module, choose M here: the module will be called xen-kbdfront. -config INPUT_SIRFSOC_ONKEY - tristate "CSR SiRFSoC power on/off/suspend key support" - depends on ARCH_SIRF && OF - default y - help - Say Y here if you want to support for the SiRFSoC power on/off/suspend key - in Linux, after you press the onkey, system will suspend. - - If unsure, say N. - config INPUT_IDEAPAD_SLIDEBAR tristate "IdeaPad Laptop Slidebar" depends on INPUT
drivers/input/misc/Makefile +0 -1
@@ -72,7 +72,6 @@ obj-$(CONFIG_INPUT_GPIO_ROTARY_ENCODER) += rotary_encoder.o obj-$(CONFIG_INPUT_RK805_PWRKEY) += rk805-pwrkey.o obj-$(CONFIG_INPUT_SC27XX_VIBRA) += sc27xx-vibra.o obj-$(CONFIG_INPUT_SGI_BTNS) += sgi_btns.o -obj-$(CONFIG_INPUT_SIRFSOC_ONKEY) += sirfsoc-onkey.o obj-$(CONFIG_INPUT_SOC_BUTTON_ARRAY) += soc_button_array.o obj-$(CONFIG_INPUT_SPARCSPKR) += sparcspkr.o obj-$(CONFIG_INPUT_STPMIC1_ONKEY) += stpmic1_onkey.o
drivers/input/misc/sirfsoc-onkey.c deleted +0 -207
207 lines not on this page · raw message
Signature · 7 lines
2.29.2 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Quoted 8 lines · Arnd Bergmann <[email protected]> 于2021年1月21日周四 上午2:31写道:
From: Arnd Bergmann <[email protected]>
The CSR SiRF prima2/atlas platforms are getting removed, so this driver is no longer needed.
Cc Barry Song <[email protected]>Signed-off-by Arnd Bergmann <[email protected]>
Acked-by Barry Song <[email protected]>
Quoted 254 lines
--- drivers/input/misc/Kconfig | 10 -- drivers/input/misc/Makefile | 1 - drivers/input/misc/sirfsoc-onkey.c | 207 ----------------------------- 3 files changed, 218 deletions(-) delete mode 100644 drivers/input/misc/sirfsoc-onkey.cdrivers/input/misc/Kconfig +0
-10@@ -789,16 +789,6 @@ config INPUT_XEN_KBDDEV_FRONTEND To compile this driver as a module, choose M here: the module will be called xen-kbdfront. -config INPUT_SIRFSOC_ONKEY - tristate "CSR SiRFSoC power on/off/suspend key support" - depends on ARCH_SIRF && OF - default y - help - Say Y here if you want to support for the SiRFSoC power on/off/suspend key - in Linux, after you press the onkey, system will suspend. - - If unsure, say N. - config INPUT_IDEAPAD_SLIDEBAR tristate "IdeaPad Laptop Slidebar" depends on INPUTdrivers/input/misc/Makefile +0
-1@@ -72,7 +72,6 @@ obj-$(CONFIG_INPUT_GPIO_ROTARY_ENCODER) += rotary_encoder.o obj-$(CONFIG_INPUT_RK805_PWRKEY) += rk805-pwrkey.o obj-$(CONFIG_INPUT_SC27XX_VIBRA) += sc27xx-vibra.o obj-$(CONFIG_INPUT_SGI_BTNS) += sgi_btns.o -obj-$(CONFIG_INPUT_SIRFSOC_ONKEY) += sirfsoc-onkey.o obj-$(CONFIG_INPUT_SOC_BUTTON_ARRAY) += soc_button_array.o obj-$(CONFIG_INPUT_SPARCSPKR) += sparcspkr.o obj-$(CONFIG_INPUT_STPMIC1_ONKEY) += stpmic1_onkey.odrivers/input/misc/sirfsoc-onkey.c deleted +0
-208@@ -1,207 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* -* Power key driver for SiRF PrimaII -* -* Copyright (c) 2013 - 2014 Cambridge Silicon Radio Limited, a CSR plc group -* company. -*/ - -#include <linux/module.h> -#include <linux/interrupt.h> -#include <linux/delay.h> -#include <linux/platform_device.h> -#include <linux/input.h> -#include <linux/rtc/sirfsoc_rtciobrg.h> -#include <linux/of.h> -#include <linux/workqueue.h> - -struct sirfsoc_pwrc_drvdata { -u32 pwrc_base; -struct input_dev *input; -struct delayed_work work; -}; - -#define PWRC_ON_KEY_BIT (1 << 0) - -#define PWRC_INT_STATUS 0xc -#define PWRC_INT_MASK 0x10 -#define PWRC_PIN_STATUS 0x14 -#define PWRC_KEY_DETECT_UP_TIME 20/* ms*/ - -static int sirfsoc_pwrc_is_on_key_down (struct sirfsoc_pwrc_drvdata *pwrcdrv) -{ -u32 state =sirfsoc_rtc_iobrg_readl (pwrcdrv->pwrc_base + -PWRC_PIN_STATUS ); -return !(state &PWRC_ON_KEY_BIT );/* ON_KEY is active low */ -} - -static void sirfsoc_pwrc_report_event (struct work_struct *work) -{ -struct sirfsoc_pwrc_drvdata *pwrcdrv = - container_of(work, struct sirfsoc_pwrc_drvdata, work.work); - -if (sirfsoc_pwrc_is_on_key_down (pwrcdrv)) { -schedule_delayed_work (&pwrcdrv->work, -msecs_to_jiffies (PWRC_KEY_DETECT_UP_TIME )); - }else { -input_event (pwrcdrv->input,EV_KEY ,KEY_POWER ,0 ); -input_sync (pwrcdrv->input); - } -} - -static irqreturn_t sirfsoc_pwrc_isr (int irq,void *dev_id) -{ -struct sirfsoc_pwrc_drvdata *pwrcdrv = dev_id; -u32 int_status; - - int_status =sirfsoc_rtc_iobrg_readl (pwrcdrv->pwrc_base + -PWRC_INT_STATUS ); -sirfsoc_rtc_iobrg_writel (int_status & ~PWRC_ON_KEY_BIT , - pwrcdrv->pwrc_base +PWRC_INT_STATUS ); - -input_event (pwrcdrv->input,EV_KEY ,KEY_POWER ,1 ); -input_sync (pwrcdrv->input); -schedule_delayed_work (&pwrcdrv->work, -msecs_to_jiffies (PWRC_KEY_DETECT_UP_TIME )); - -return IRQ_HANDLED ; -} - -static void sirfsoc_pwrc_toggle_interrupts (struct sirfsoc_pwrc_drvdata *pwrcdrv, -bool enable) -{ -u32 int_mask; - - int_mask =sirfsoc_rtc_iobrg_readl (pwrcdrv->pwrc_base +PWRC_INT_MASK ); -if (enable) - int_mask |=PWRC_ON_KEY_BIT ; -else - int_mask &= ~PWRC_ON_KEY_BIT ; -sirfsoc_rtc_iobrg_writel (int_mask, pwrcdrv->pwrc_base +PWRC_INT_MASK ); -} - -static int sirfsoc_pwrc_open (struct input_dev *input) -{ -struct sirfsoc_pwrc_drvdata *pwrcdrv =input_get_drvdata (input); - -sirfsoc_pwrc_toggle_interrupts (pwrcdrv, true); - -return 0 ; -} - -static void sirfsoc_pwrc_close (struct input_dev *input) -{ -struct sirfsoc_pwrc_drvdata *pwrcdrv =input_get_drvdata (input); - -sirfsoc_pwrc_toggle_interrupts (pwrcdrv, false); -cancel_delayed_work_sync (&pwrcdrv->work); -} - -static const struct of_device_id sirfsoc_pwrc_of_match[] = { - { .compatible ="sirf,prima2-pwrc" }, - {}, -}; -MODULE_DEVICE_TABLE (of, sirfsoc_pwrc_of_match); - -static int sirfsoc_pwrc_probe (struct platform_device *pdev) -{ -struct device_node *np = pdev->dev.of_node; -struct sirfsoc_pwrc_drvdata *pwrcdrv; -int irq; -int error; - - pwrcdrv =devm_kzalloc (&pdev->dev,sizeof (struct sirfsoc_pwrc_drvdata ), -GFP_KERNEL ); -if (!pwrcdrv) { -dev_info (&pdev->dev,"Not enough memory for the device data\n" ); -return -ENOMEM ; - } - -/* -* We can't use of_iomap because pwrc is not mapped in memory, -* the so-called base address is only offset in rtciobrg -*/ - error =of_property_read_u32 (np,"reg" , &pwrcdrv->pwrc_base); -if (error) { -dev_err (&pdev->dev, -"unable to find base address of pwrc node in dtb\n" ); -return error; - } - - pwrcdrv->input =devm_input_allocate_device (&pdev->dev); -if (!pwrcdrv->input) -return -ENOMEM ; - - pwrcdrv->input->name ="sirfsoc pwrckey" ; - pwrcdrv->input->phys ="pwrc/input0" ; - pwrcdrv->input->evbit[0 ] =BIT_MASK (EV_KEY ); -input_set_capability (pwrcdrv->input,EV_KEY ,KEY_POWER ); - -INIT_DELAYED_WORK (&pwrcdrv->work, sirfsoc_pwrc_report_event); - - pwrcdrv->input->open = sirfsoc_pwrc_open; - pwrcdrv->input->close = sirfsoc_pwrc_close; - -input_set_drvdata (pwrcdrv->input, pwrcdrv); - -/* Make sure the device is quiesced */ -sirfsoc_pwrc_toggle_interrupts (pwrcdrv, false); - - irq =platform_get_irq (pdev,0 ); - error =devm_request_irq (&pdev->dev, irq, - sirfsoc_pwrc_isr,0 , -"sirfsoc_pwrc_int" , pwrcdrv); -if (error) { -dev_err (&pdev->dev,"unable to claim irq %d, error: %d\n" , - irq, error); -return error; - } - - error =input_register_device (pwrcdrv->input); -if (error) { -dev_err (&pdev->dev, -"unable to register input device, error: %d\n" , - error); -return error; - } - -dev_set_drvdata (&pdev->dev, pwrcdrv); -device_init_wakeup (&pdev->dev,1 ); - -return 0 ; -} - -static int __maybe_unused sirfsoc_pwrc_resume (struct device *dev) -{ -struct sirfsoc_pwrc_drvdata *pwrcdrv =dev_get_drvdata (dev); -struct input_dev *input = pwrcdrv->input; - -/* -* Do not mask pwrc interrupt as we want pwrc work as a wakeup source -* if users touch X_ONKEY_B, see arch/arm/mach-prima2/pm.c -*/ -mutex_lock (&input->mutex); -if (input_device_enabled (input)) -sirfsoc_pwrc_toggle_interrupts (pwrcdrv, true); -mutex_unlock (&input->mutex); - -return 0 ; -} - -static SIMPLE_DEV_PM_OPS(sirfsoc_pwrc_pm_ops, NULL, sirfsoc_pwrc_resume); - -static struct platform_driver sirfsoc_pwrc_driver = { - .probe = sirfsoc_pwrc_probe, - .driver = { - .name ="sirfsoc-pwrc" , - .pm = &sirfsoc_pwrc_pm_ops, - .of_match_table = sirfsoc_pwrc_of_match, - } -}; - -module_platform_driver (sirfsoc_pwrc_driver); - -MODULE_LICENSE ("GPL v2" ); -MODULE_AUTHOR ("Binghua Duan <[email protected]>, Xianglong Du <[email protected]>" ); -MODULE_DESCRIPTION ("CSR Prima2 PWRC Driver" ); -MODULE_ALIAS ("platform:sirfsoc-pwrc" ); --
Quoted 2 lines
2.29.2
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel