Skip to contentSkip to conversation

meson: Clarify summary

PATCH Applied Philippe Mathieu-Daudé 3 participants 14 messages Jan 21, 2021 Arm/Amlogic Meson SoC support

lore
Share & tools
lore
#0 lore raw

v2 cover meson: Clarify summary

Reorder stuffs in summary to quicker understand bug reports.

Remove information from deselected features when not necessary.

Since v2:
- integrate Paolo's summary sections
- simpler sort

Philippe Mathieu-Daudé (8):
meson: Summarize information related to directories first
meson: Display host binaries information altogether
meson: Summarize overall features altogether
meson: Summarize compilation-related information altogether
meson: Display accelerators and selected targets altogether
meson: Display block layer information altogether
meson: Display cryto-related information altogether
meson: Display library dependencies altogether

 meson.build | 295 ++++++++++++++++++++++++++++++----------------------
 1 file changed, 171 insertions(+), 124 deletions(-)
Signature · 1 line
2.26.2
#1 lore raw

PATCH v2 1/8 meson: Summarize information related to directories first

---
 meson.build | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)
meson.build +6 -2
index 8f5a8b997d3..a47c5f8ab9d 100644
@@ -2282,6 +2282,7 @@
 # Configuration summary #
 #########################
 
+# Directories
 summary_info = {}
 summary_info += {'Install prefix':    get_option('prefix')}
 summary_info += {'BIOS directory':    qemu_datadir}
@@ -2301,8 +2302,11 @@
 summary_info += {'Doc directory':     get_option('docdir')}
 summary_info += {'Build directory':   meson.current_build_dir()}
 summary_info += {'Source path':       meson.current_source_dir()}
-summary_info += {'GIT binary':        config_host['GIT']}
 summary_info += {'GIT submodules':    config_host['GIT_SUBMODULES']}
+summary(summary_info, bool_yn: true, section: 'Directories')
+
+summary_info = {}
+summary_info += {'GIT binary':        config_host['GIT']}
 summary_info += {'C compiler':        meson.get_compiler('c').cmd_array()[0]}
 summary_info += {'Host C compiler':   meson.get_compiler('c', native: true).cmd_array()[0]}
 if link_language == 'cpp'
@@ -2510,7 +2514,7 @@
 summary_info += {'Linux keyring':     config_host.has_key('CONFIG_SECRET_KEYRING')}
 summary_info += {'FUSE exports':      fuse.found()}
 summary_info += {'FUSE lseek':        fuse_lseek.found()}
-summary(summary_info, bool_yn: true)
+summary(summary_info, bool_yn: true, section: 'Misc')
 
 if not supported_cpus.contains(cpu)
   message()
Signature · 1 line
2.26.2
#2 lore raw

PATCH v2 2/8 meson: Display host binaries information altogether

In reply to Philippe Mathieu-Daudé
---
 meson.build | 26 +++++++++++++++-----------
 1 file changed, 15 insertions(+), 11 deletions(-)
meson.build +15 -11
index a47c5f8ab9d..614eef82c37 100644
@@ -2305,8 +2305,22 @@
 summary_info += {'GIT submodules':    config_host['GIT_SUBMODULES']}
 summary(summary_info, bool_yn: true, section: 'Directories')
 
+# Host binaries
+summary_info = {}
+summary_info += {'git':               config_host['GIT']}
+summary_info += {'make':              config_host['MAKE']}
+summary_info += {'python':            '@0@ (version: @1@)'.format(python.full_path(), python.language_version())}
+summary_info += {'sphinx-build':      sphinx_build.found()}
+if config_host.has_key('HAVE_GDB_BIN')
+  summary_info += {'gdb':             config_host['HAVE_GDB_BIN']}
+endif
+summary_info += {'genisoimage':       config_host['GENISOIMAGE']}
+if slirp_opt != 'disabled'
+  summary_info += {'smbd':            config_host['CONFIG_SMBD_COMMAND']}
+endif
+summary(summary_info, bool_yn: true, section: 'Host binaries')
+
 summary_info = {}
-summary_info += {'GIT binary':        config_host['GIT']}
 summary_info += {'C compiler':        meson.get_compiler('c').cmd_array()[0]}
 summary_info += {'Host C compiler':   meson.get_compiler('c', native: true).cmd_array()[0]}
 if link_language == 'cpp'
@@ -2332,15 +2346,8 @@
 endif
 summary_info += {'QEMU_CFLAGS':       config_host['QEMU_CFLAGS']}
 summary_info += {'QEMU_LDFLAGS':      config_host['QEMU_LDFLAGS']}
-summary_info += {'make':              config_host['MAKE']}
-summary_info += {'python':            '@0@ (version: @1@)'.format(python.full_path(), python.language_version())}
-summary_info += {'sphinx-build':      sphinx_build.found()}
-summary_info += {'genisoimage':       config_host['GENISOIMAGE']}
 # TODO: add back version
 summary_info += {'slirp support':     slirp_opt == 'disabled' ? false : slirp_opt}
-if slirp_opt != 'disabled'
-  summary_info += {'smbd':            config_host['CONFIG_SMBD_COMMAND']}
-endif
 summary_info += {'module support':    config_host.has_key('CONFIG_MODULES')}
 if config_host.has_key('CONFIG_MODULES')
   summary_info += {'alternative module path': config_host.has_key('CONFIG_MODULE_UPGRADES')}
@@ -2506,9 +2513,6 @@
 summary_info += {'default devices':   get_option('default_devices')}
 summary_info += {'plugin support':    config_host.has_key('CONFIG_PLUGIN')}
 summary_info += {'fuzzing support':   config_host.has_key('CONFIG_FUZZ')}
-if config_host.has_key('HAVE_GDB_BIN')
-  summary_info += {'gdb':             config_host['HAVE_GDB_BIN']}
-endif
 summary_info += {'thread sanitizer':  config_host.has_key('CONFIG_TSAN')}
 summary_info += {'rng-none':          config_host.has_key('CONFIG_RNG_NONE')}
 summary_info += {'Linux keyring':     config_host.has_key('CONFIG_SECRET_KEYRING')}
Signature · 1 line
2.26.2
#3 lore raw

PATCH v2 3/8 meson: Summarize overall features altogether

In reply to Philippe Mathieu-Daudé

---
Cc: Stefan Hajnoczi <[email protected]>

---
 meson.build | 35 +++++++++++++++++++++--------------
 1 file changed, 21 insertions(+), 14 deletions(-)
meson.build +21 -14
index 614eef82c37..4b600315ba4 100644
@@ -2320,6 +2320,27 @@
 endif
 summary(summary_info, bool_yn: true, section: 'Host binaries')
 
+# Overall features
+summary_info = {}
+summary_info += {'Documentation':     build_docs}
+summary_info += {'Install blobs':     get_option('install_blobs')}
+# TODO: add back version
+summary_info += {'slirp support':     slirp_opt == 'disabled' ? false : slirp_opt}
+summary_info += {'module support':    config_host.has_key('CONFIG_MODULES')}
+if config_host.has_key('CONFIG_MODULES')
+  summary_info += {'alternative module path': config_host.has_key('CONFIG_MODULE_UPGRADES')}
+endif
+summary_info += {'plugin support':    config_host.has_key('CONFIG_PLUGIN')}
+summary_info += {'fuzzing support':   config_host.has_key('CONFIG_FUZZ')}
+if have_system
+  summary_info += {'Audio drivers':     config_host['CONFIG_AUDIO_DRIVERS']}
+endif
+summary_info += {'Trace backends':    config_host['TRACE_BACKENDS']}
+if config_host['TRACE_BACKENDS'].split().contains('simple')
+  summary_info += {'Trace output file': config_host['CONFIG_TRACE_FILE'] + '-<pid>'}
+endif
+summary(summary_info, bool_yn: true, section: 'Overall')
+
 summary_info = {}
 summary_info += {'C compiler':        meson.get_compiler('c').cmd_array()[0]}
 summary_info += {'Host C compiler':   meson.get_compiler('c', native: true).cmd_array()[0]}
@@ -2347,11 +2368,6 @@
 summary_info += {'QEMU_CFLAGS':       config_host['QEMU_CFLAGS']}
 summary_info += {'QEMU_LDFLAGS':      config_host['QEMU_LDFLAGS']}
 # TODO: add back version
-summary_info += {'slirp support':     slirp_opt == 'disabled' ? false : slirp_opt}
-summary_info += {'module support':    config_host.has_key('CONFIG_MODULES')}
-if config_host.has_key('CONFIG_MODULES')
-  summary_info += {'alternative module path': config_host.has_key('CONFIG_MODULE_UPGRADES')}
-endif
 summary_info += {'host CPU':          cpu}
 summary_info += {'host endianness':   build_machine.endian()}
 summary_info += {'target list':       ' '.join(target_dirs)}
@@ -2393,7 +2409,6 @@
 summary_info += {'virgl support':     config_host.has_key('CONFIG_VIRGL')}
 summary_info += {'curl support':      curl.found()}
 summary_info += {'mingw32 support':   targetos == 'windows'}
-summary_info += {'Audio drivers':     config_host['CONFIG_AUDIO_DRIVERS']}
 summary_info += {'Block whitelist (rw)': config_host['CONFIG_BDRV_RW_WHITELIST']}
 summary_info += {'Block whitelist (ro)': config_host['CONFIG_BDRV_RO_WHITELIST']}
 summary_info += {'VirtFS support':    have_virtfs}
@@ -2410,14 +2425,12 @@
   summary_info += {'xen ctrl version':  config_host['CONFIG_XEN_CTRL_INTERFACE_VERSION']}
 endif
 summary_info += {'brlapi support':    brlapi.found()}
-summary_info += {'Documentation':     build_docs}
 summary_info += {'PIE':               get_option('b_pie')}
 summary_info += {'vde support':       config_host.has_key('CONFIG_VDE')}
 summary_info += {'netmap support':    config_host.has_key('CONFIG_NETMAP')}
 summary_info += {'Linux AIO support': config_host.has_key('CONFIG_LINUX_AIO')}
 summary_info += {'Linux io_uring support': config_host.has_key('CONFIG_LINUX_IO_URING')}
 summary_info += {'ATTR/XATTR support': libattr.found()}
-summary_info += {'Install blobs':     get_option('install_blobs')}
 summary_info += {'KVM support':       config_all.has_key('CONFIG_KVM')}
 summary_info += {'HAX support':       config_all.has_key('CONFIG_HAX')}
 summary_info += {'HVF support':       config_all.has_key('CONFIG_HVF')}
@@ -2447,10 +2460,6 @@
 summary_info += {'vhost-user-blk server support': have_vhost_user_blk_server}
 summary_info += {'vhost-user-fs support': config_host.has_key('CONFIG_VHOST_USER_FS')}
 summary_info += {'vhost-vdpa support': config_host.has_key('CONFIG_VHOST_VDPA')}
-summary_info += {'Trace backends':    config_host['TRACE_BACKENDS']}
-if config_host['TRACE_BACKENDS'].split().contains('simple')
-  summary_info += {'Trace output file': config_host['CONFIG_TRACE_FILE'] + '-<pid>'}
-endif
 # TODO: add back protocol and server version
 summary_info += {'spice support':     config_host.has_key('CONFIG_SPICE')}
 summary_info += {'rbd support':       rbd.found()}
@@ -2511,8 +2520,6 @@
 summary_info += {'libdaxctl support': config_host.has_key('CONFIG_LIBDAXCTL')}
 summary_info += {'libudev':           libudev.found()}
 summary_info += {'default devices':   get_option('default_devices')}
-summary_info += {'plugin support':    config_host.has_key('CONFIG_PLUGIN')}
-summary_info += {'fuzzing support':   config_host.has_key('CONFIG_FUZZ')}
 summary_info += {'thread sanitizer':  config_host.has_key('CONFIG_TSAN')}
 summary_info += {'rng-none':          config_host.has_key('CONFIG_RNG_NONE')}
 summary_info += {'Linux keyring':     config_host.has_key('CONFIG_SECRET_KEYRING')}
Signature · 1 line
2.26.2
#4 lore raw

PATCH v2 4/8 meson: Summarize compilation-related information altogether

In reply to Philippe Mathieu-Daudé
---
 meson.build | 63 +++++++++++++++++++++++++++++------------------------
 1 file changed, 35 insertions(+), 28 deletions(-)
meson.build +35 -28
index 4b600315ba4..194b8523f77 100644
@@ -2341,7 +2341,10 @@
 endif
 summary(summary_info, bool_yn: true, section: 'Overall')
 
+# Compilation information
 summary_info = {}
+summary_info += {'host CPU':          cpu}
+summary_info += {'host endianness':   build_machine.endian()}
 summary_info += {'C compiler':        meson.get_compiler('c').cmd_array()[0]}
 summary_info += {'Host C compiler':   meson.get_compiler('c', native: true).cmd_array()[0]}
 if link_language == 'cpp'
@@ -2352,6 +2355,11 @@
 if targetos == 'darwin'
   summary_info += {'Objective-C compiler': meson.get_compiler('objc').cmd_array()[0]}
 endif
+if targetos == 'windows'
+  if 'WIN_SDK' in config_host
+    summary_info += {'Windows SDK':   config_host['WIN_SDK']}
+  endif
+endif
 summary_info += {'ARFLAGS':           config_host['ARFLAGS']}
 summary_info += {'CFLAGS':            ' '.join(get_option('c_args')
                                                + ['-O' + get_option('optimization')]
@@ -2367,16 +2375,36 @@
 endif
 summary_info += {'QEMU_CFLAGS':       config_host['QEMU_CFLAGS']}
 summary_info += {'QEMU_LDFLAGS':      config_host['QEMU_LDFLAGS']}
-# TODO: add back version
-summary_info += {'host CPU':          cpu}
-summary_info += {'host endianness':   build_machine.endian()}
-summary_info += {'target list':       ' '.join(target_dirs)}
-summary_info += {'gprof enabled':     config_host.has_key('CONFIG_GPROF')}
-summary_info += {'sparse enabled':    sparse.found()}
-summary_info += {'strip binaries':    get_option('strip')}
 summary_info += {'profiler':          config_host.has_key('CONFIG_PROFILER')}
 summary_info += {'link-time optimization (LTO)': get_option('b_lto')}
+summary_info += {'PIE':               get_option('b_pie')}
 summary_info += {'static build':      config_host.has_key('CONFIG_STATIC')}
+summary_info += {'malloc trim support': has_malloc_trim}
+summary_info += {'membarrier':        config_host.has_key('CONFIG_MEMBARRIER')}
+summary_info += {'preadv support':    config_host.has_key('CONFIG_PREADV')}
+summary_info += {'fdatasync':         config_host.has_key('CONFIG_FDATASYNC')}
+summary_info += {'madvise':           config_host.has_key('CONFIG_MADVISE')}
+summary_info += {'posix_madvise':     config_host.has_key('CONFIG_POSIX_MADVISE')}
+summary_info += {'posix_memalign':    config_host.has_key('CONFIG_POSIX_MEMALIGN')}
+summary_info += {'debug stack usage': config_host.has_key('CONFIG_DEBUG_STACK_USAGE')}
+summary_info += {'mutex debugging':   config_host.has_key('CONFIG_DEBUG_MUTEX')}
+summary_info += {'memory allocator':  get_option('malloc')}
+summary_info += {'avx2 optimization': config_host.has_key('CONFIG_AVX2_OPT')}
+summary_info += {'avx512f optimization': config_host.has_key('CONFIG_AVX512F_OPT')}
+summary_info += {'gprof enabled':     config_host.has_key('CONFIG_GPROF')}
+summary_info += {'gcov':              get_option('b_coverage')}
+summary_info += {'thread sanitizer':  config_host.has_key('CONFIG_TSAN')}
+summary_info += {'CFI support':       get_option('cfi')}
+if get_option('cfi')
+  summary_info += {'CFI debug support': get_option('cfi_debug')}
+endif
+summary_info += {'strip binaries':    get_option('strip')}
+summary_info += {'mingw32 support':   targetos == 'windows'}
+summary(summary_info, bool_yn: true, section: 'Compilation')
+
+summary_info = {}
+summary_info += {'target list':       ' '.join(target_dirs)}
+summary_info += {'sparse enabled':    sparse.found()}
 if targetos == 'darwin'
   summary_info += {'Cocoa support':   cocoa.found()}
 endif
@@ -2408,7 +2436,6 @@
 # TODO: add back version
 summary_info += {'virgl support':     config_host.has_key('CONFIG_VIRGL')}
 summary_info += {'curl support':      curl.found()}
-summary_info += {'mingw32 support':   targetos == 'windows'}
 summary_info += {'Block whitelist (rw)': config_host['CONFIG_BDRV_RW_WHITELIST']}
 summary_info += {'Block whitelist (ro)': config_host['CONFIG_BDRV_RO_WHITELIST']}
 summary_info += {'VirtFS support':    have_virtfs}
@@ -2425,7 +2452,6 @@
   summary_info += {'xen ctrl version':  config_host['CONFIG_XEN_CTRL_INTERFACE_VERSION']}
 endif
 summary_info += {'brlapi support':    brlapi.found()}
-summary_info += {'PIE':               get_option('b_pie')}
 summary_info += {'vde support':       config_host.has_key('CONFIG_VDE')}
 summary_info += {'netmap support':    config_host.has_key('CONFIG_NETMAP')}
 summary_info += {'Linux AIO support': config_host.has_key('CONFIG_LINUX_AIO')}
@@ -2440,16 +2466,9 @@
   summary_info += {'TCG debug enabled': config_host.has_key('CONFIG_DEBUG_TCG')}
   summary_info += {'TCG interpreter':   config_host.has_key('CONFIG_TCG_INTERPRETER')}
 endif
-summary_info += {'malloc trim support': has_malloc_trim}
 summary_info += {'RDMA support':      config_host.has_key('CONFIG_RDMA')}
 summary_info += {'PVRDMA support':    config_host.has_key('CONFIG_PVRDMA')}
 summary_info += {'fdt support':       fdt_opt == 'disabled' ? false : fdt_opt}
-summary_info += {'membarrier':        config_host.has_key('CONFIG_MEMBARRIER')}
-summary_info += {'preadv support':    config_host.has_key('CONFIG_PREADV')}
-summary_info += {'fdatasync':         config_host.has_key('CONFIG_FDATASYNC')}
-summary_info += {'madvise':           config_host.has_key('CONFIG_MADVISE')}
-summary_info += {'posix_madvise':     config_host.has_key('CONFIG_POSIX_MADVISE')}
-summary_info += {'posix_memalign':    config_host.has_key('CONFIG_POSIX_MEMALIGN')}
 summary_info += {'libcap-ng support': libcap_ng.found()}
 summary_info += {'vhost-kernel support': config_host.has_key('CONFIG_VHOST_KERNEL')}
 summary_info += {'vhost-net support': config_host.has_key('CONFIG_VHOST_NET')}
@@ -2474,23 +2493,15 @@
 summary_info += {'libnfs support':    libnfs.found()}
 summary_info += {'build guest agent': config_host.has_key('CONFIG_GUEST_AGENT')}
 if targetos == 'windows'
-  if 'WIN_SDK' in config_host
-    summary_info += {'Windows SDK':       config_host['WIN_SDK']}
-  endif
   summary_info += {'QGA VSS support':   config_host.has_key('CONFIG_QGA_VSS')}
   summary_info += {'QGA w32 disk info': config_host.has_key('CONFIG_QGA_NTDDSCSI')}
   summary_info += {'QGA MSI support':   config_host.has_key('CONFIG_QGA_MSI')}
 endif
 summary_info += {'seccomp support':   seccomp.found()}
-summary_info += {'CFI support':       get_option('cfi')}
-summary_info += {'CFI debug support': get_option('cfi_debug')}
 summary_info += {'coroutine backend': config_host['CONFIG_COROUTINE_BACKEND']}
 summary_info += {'coroutine pool':    config_host['CONFIG_COROUTINE_POOL'] == '1'}
-summary_info += {'debug stack usage': config_host.has_key('CONFIG_DEBUG_STACK_USAGE')}
-summary_info += {'mutex debugging':   config_host.has_key('CONFIG_DEBUG_MUTEX')}
 summary_info += {'crypto afalg':      config_host.has_key('CONFIG_AF_ALG')}
 summary_info += {'GlusterFS support': glusterfs.found()}
-summary_info += {'gcov':              get_option('b_coverage')}
 summary_info += {'TPM support':       config_host.has_key('CONFIG_TPM')}
 summary_info += {'libssh support':    config_host.has_key('CONFIG_LIBSSH')}
 summary_info += {'QOM debugging':     config_host.has_key('CONFIG_QOM_CAST_DEBUG')}
@@ -2502,9 +2513,6 @@
 summary_info += {'zstd support':      zstd.found()}
 summary_info += {'NUMA host support': config_host.has_key('CONFIG_NUMA')}
 summary_info += {'libxml2':           config_host.has_key('CONFIG_LIBXML2')}
-summary_info += {'memory allocator':  get_option('malloc')}
-summary_info += {'avx2 optimization': config_host.has_key('CONFIG_AVX2_OPT')}
-summary_info += {'avx512f optimization': config_host.has_key('CONFIG_AVX512F_OPT')}
 summary_info += {'replication support': config_host.has_key('CONFIG_REPLICATION')}
 summary_info += {'bochs support':     config_host.has_key('CONFIG_BOCHS')}
 summary_info += {'cloop support':     config_host.has_key('CONFIG_CLOOP')}
@@ -2520,7 +2528,6 @@
 summary_info += {'libdaxctl support': config_host.has_key('CONFIG_LIBDAXCTL')}
 summary_info += {'libudev':           libudev.found()}
 summary_info += {'default devices':   get_option('default_devices')}
-summary_info += {'thread sanitizer':  config_host.has_key('CONFIG_TSAN')}
 summary_info += {'rng-none':          config_host.has_key('CONFIG_RNG_NONE')}
 summary_info += {'Linux keyring':     config_host.has_key('CONFIG_SECRET_KEYRING')}
 summary_info += {'FUSE exports':      fuse.found()}
Signature · 1 line
2.26.2
#5 lore raw

PATCH v2 5/8 meson: Display accelerators and selected targets altogether

In reply to Philippe Mathieu-Daudé

Display accelerators and selected targets altogether, avoid to display unuseful information when not relevant.

---
Cc: Richard Henderson <[email protected]>
Cc: Paolo Bonzini <[email protected]>
Cc: Cameron Esfahani <[email protected]>
Cc: Roman Bolshakov <[email protected]>
Cc: Sunil Muthuswamy <[email protected]>
Cc: Stefano Stabellini <[email protected]>
Cc: Anthony Perard <[email protected]>
Cc: Paul Durrant <[email protected]>

---
 meson.build | 38 ++++++++++++++++++++++++--------------
 1 file changed, 24 insertions(+), 14 deletions(-)
meson.build +24 -14
index 194b8523f77..a0945749f94 100644
@@ -2323,6 +2323,8 @@
 # Overall features
 summary_info = {}
 summary_info += {'Documentation':     build_docs}
+summary_info += {'system-mode emulation': have_system}
+summary_info += {'user-mode emulation': have_user}
 summary_info += {'Install blobs':     get_option('install_blobs')}
 # TODO: add back version
 summary_info += {'slirp support':     slirp_opt == 'disabled' ? false : slirp_opt}
@@ -2402,8 +2404,30 @@
 summary_info += {'mingw32 support':   targetos == 'windows'}
 summary(summary_info, bool_yn: true, section: 'Compilation')
 
+# Targets and accelerators
 summary_info = {}
+if have_system
+  summary_info += {'KVM support':       config_all.has_key('CONFIG_KVM')}
+  summary_info += {'HAX support':       config_all.has_key('CONFIG_HAX')}
+  summary_info += {'HVF support':       config_all.has_key('CONFIG_HVF')}
+  summary_info += {'WHPX support':      config_all.has_key('CONFIG_WHPX')}
+  summary_info += {'Xen support':       config_host.has_key('CONFIG_XEN_BACKEND')}
+  if config_host.has_key('CONFIG_XEN_BACKEND')
+    summary_info += {'xen ctrl version':  config_host['CONFIG_XEN_CTRL_INTERFACE_VERSION']}
+  endif
+endif
+summary_info += {'TCG support':       config_all.has_key('CONFIG_TCG')}
+if config_all.has_key('CONFIG_TCG')
+  summary_info += {'TCG debug enabled': config_host.has_key('CONFIG_DEBUG_TCG')}
+  summary_info += {'TCG interpreter':   config_host.has_key('CONFIG_TCG_INTERPRETER')}
+endif
 summary_info += {'target list':       ' '.join(target_dirs)}
+if have_system
+  summary_info += {'default devices':   get_option('default_devices')}
+endif
+summary(summary_info, bool_yn: true, section: 'Targets and accelerators')
+
+summary_info = {}
 summary_info += {'sparse enabled':    sparse.found()}
 if targetos == 'darwin'
   summary_info += {'Cocoa support':   cocoa.found()}
@@ -2447,25 +2471,12 @@
   summary_info += {'VNC JPEG support':  jpeg.found()}
   summary_info += {'VNC PNG support':   png.found()}
 endif
-summary_info += {'xen support':       config_host.has_key('CONFIG_XEN_BACKEND')}
-if config_host.has_key('CONFIG_XEN_BACKEND')
-  summary_info += {'xen ctrl version':  config_host['CONFIG_XEN_CTRL_INTERFACE_VERSION']}
-endif
 summary_info += {'brlapi support':    brlapi.found()}
 summary_info += {'vde support':       config_host.has_key('CONFIG_VDE')}
 summary_info += {'netmap support':    config_host.has_key('CONFIG_NETMAP')}
 summary_info += {'Linux AIO support': config_host.has_key('CONFIG_LINUX_AIO')}
 summary_info += {'Linux io_uring support': config_host.has_key('CONFIG_LINUX_IO_URING')}
 summary_info += {'ATTR/XATTR support': libattr.found()}
-summary_info += {'KVM support':       config_all.has_key('CONFIG_KVM')}
-summary_info += {'HAX support':       config_all.has_key('CONFIG_HAX')}
-summary_info += {'HVF support':       config_all.has_key('CONFIG_HVF')}
-summary_info += {'WHPX support':      config_all.has_key('CONFIG_WHPX')}
-summary_info += {'TCG support':       config_all.has_key('CONFIG_TCG')}
-if config_all.has_key('CONFIG_TCG')
-  summary_info += {'TCG debug enabled': config_host.has_key('CONFIG_DEBUG_TCG')}
-  summary_info += {'TCG interpreter':   config_host.has_key('CONFIG_TCG_INTERPRETER')}
-endif
 summary_info += {'RDMA support':      config_host.has_key('CONFIG_RDMA')}
 summary_info += {'PVRDMA support':    config_host.has_key('CONFIG_PVRDMA')}
 summary_info += {'fdt support':       fdt_opt == 'disabled' ? false : fdt_opt}
@@ -2527,7 +2538,6 @@
 summary_info += {'libpmem support':   config_host.has_key('CONFIG_LIBPMEM')}
 summary_info += {'libdaxctl support': config_host.has_key('CONFIG_LIBDAXCTL')}
 summary_info += {'libudev':           libudev.found()}
-summary_info += {'default devices':   get_option('default_devices')}
 summary_info += {'rng-none':          config_host.has_key('CONFIG_RNG_NONE')}
 summary_info += {'Linux keyring':     config_host.has_key('CONFIG_SECRET_KEYRING')}
 summary_info += {'FUSE exports':      fuse.found()}
Signature · 1 line
2.26.2
#6 lore raw

RFC PATCH v2 6/8 meson: Display block layer information altogether

In reply to Philippe Mathieu-Daudé

Display block layer information altogether,
when it is relevant.

---
Cc: [email protected]

Should coroutine be displayed generically (here, in Misc?) or restricted to have_block?

There is probably more features I missed...

---
 meson.build | 45 ++++++++++++++++++++++++++-------------------
 1 file changed, 26 insertions(+), 19 deletions(-)
meson.build +26 -19
index a0945749f94..e372b69f163 100644
@@ -2325,6 +2325,7 @@
 summary_info += {'Documentation':     build_docs}
 summary_info += {'system-mode emulation': have_system}
 summary_info += {'user-mode emulation': have_user}
+summary_info += {'block layer':       have_block}
 summary_info += {'Install blobs':     get_option('install_blobs')}
 # TODO: add back version
 summary_info += {'slirp support':     slirp_opt == 'disabled' ? false : slirp_opt}
@@ -2427,6 +2428,31 @@
 endif
 summary(summary_info, bool_yn: true, section: 'Targets and accelerators')
 
+# Block layer
+summary_info = {}
+summary_info += {'coroutine backend': config_host['CONFIG_COROUTINE_BACKEND']}
+summary_info += {'coroutine pool':    config_host['CONFIG_COROUTINE_POOL'] == '1'}
+if have_block
+  summary_info += {'Block whitelist (rw)': config_host['CONFIG_BDRV_RW_WHITELIST']}
+  summary_info += {'Block whitelist (ro)': config_host['CONFIG_BDRV_RO_WHITELIST']}
+  summary_info += {'VirtFS support':    have_virtfs}
+  summary_info += {'build virtiofs daemon': have_virtiofsd}
+  summary_info += {'Live block migration': config_host.has_key('CONFIG_LIVE_BLOCK_MIGRATION')}
+  summary_info += {'replication support': config_host.has_key('CONFIG_REPLICATION')}
+  summary_info += {'bochs support':     config_host.has_key('CONFIG_BOCHS')}
+  summary_info += {'cloop support':     config_host.has_key('CONFIG_CLOOP')}
+  summary_info += {'dmg support':       config_host.has_key('CONFIG_DMG')}
+  summary_info += {'qcow v1 support':   config_host.has_key('CONFIG_QCOW1')}
+  summary_info += {'vdi support':       config_host.has_key('CONFIG_VDI')}
+  summary_info += {'vvfat support':     config_host.has_key('CONFIG_VVFAT')}
+  summary_info += {'qed support':       config_host.has_key('CONFIG_QED')}
+  summary_info += {'parallels support': config_host.has_key('CONFIG_PARALLELS')}
+  summary_info += {'sheepdog support':  config_host.has_key('CONFIG_SHEEPDOG')}
+  summary_info += {'FUSE exports':      fuse.found()}
+  summary_info += {'FUSE lseek':        fuse_lseek.found()}
+endif
+summary(summary_info, bool_yn: true, section: 'Block layer support')
+
 summary_info = {}
 summary_info += {'sparse enabled':    sparse.found()}
 if targetos == 'darwin'
@@ -2460,10 +2486,6 @@
 # TODO: add back version
 summary_info += {'virgl support':     config_host.has_key('CONFIG_VIRGL')}
 summary_info += {'curl support':      curl.found()}
-summary_info += {'Block whitelist (rw)': config_host['CONFIG_BDRV_RW_WHITELIST']}
-summary_info += {'Block whitelist (ro)': config_host['CONFIG_BDRV_RO_WHITELIST']}
-summary_info += {'VirtFS support':    have_virtfs}
-summary_info += {'build virtiofs daemon': have_virtiofsd}
 summary_info += {'Multipath support': mpathpersist.found()}
 summary_info += {'VNC support':       vnc.found()}
 if vnc.found()
@@ -2509,14 +2531,11 @@
   summary_info += {'QGA MSI support':   config_host.has_key('CONFIG_QGA_MSI')}
 endif
 summary_info += {'seccomp support':   seccomp.found()}
-summary_info += {'coroutine backend': config_host['CONFIG_COROUTINE_BACKEND']}
-summary_info += {'coroutine pool':    config_host['CONFIG_COROUTINE_POOL'] == '1'}
 summary_info += {'crypto afalg':      config_host.has_key('CONFIG_AF_ALG')}
 summary_info += {'GlusterFS support': glusterfs.found()}
 summary_info += {'TPM support':       config_host.has_key('CONFIG_TPM')}
 summary_info += {'libssh support':    config_host.has_key('CONFIG_LIBSSH')}
 summary_info += {'QOM debugging':     config_host.has_key('CONFIG_QOM_CAST_DEBUG')}
-summary_info += {'Live block migration': config_host.has_key('CONFIG_LIVE_BLOCK_MIGRATION')}
 summary_info += {'lzo support':       lzo.found()}
 summary_info += {'snappy support':    snappy.found()}
 summary_info += {'bzip2 support':     libbzip2.found()}
@@ -2524,24 +2543,12 @@
 summary_info += {'zstd support':      zstd.found()}
 summary_info += {'NUMA host support': config_host.has_key('CONFIG_NUMA')}
 summary_info += {'libxml2':           config_host.has_key('CONFIG_LIBXML2')}
-summary_info += {'replication support': config_host.has_key('CONFIG_REPLICATION')}
-summary_info += {'bochs support':     config_host.has_key('CONFIG_BOCHS')}
-summary_info += {'cloop support':     config_host.has_key('CONFIG_CLOOP')}
-summary_info += {'dmg support':       config_host.has_key('CONFIG_DMG')}
-summary_info += {'qcow v1 support':   config_host.has_key('CONFIG_QCOW1')}
-summary_info += {'vdi support':       config_host.has_key('CONFIG_VDI')}
-summary_info += {'vvfat support':     config_host.has_key('CONFIG_VVFAT')}
-summary_info += {'qed support':       config_host.has_key('CONFIG_QED')}
-summary_info += {'parallels support': config_host.has_key('CONFIG_PARALLELS')}
-summary_info += {'sheepdog support':  config_host.has_key('CONFIG_SHEEPDOG')}
 summary_info += {'capstone':          capstone_opt == 'disabled' ? false : capstone_opt}
 summary_info += {'libpmem support':   config_host.has_key('CONFIG_LIBPMEM')}
 summary_info += {'libdaxctl support': config_host.has_key('CONFIG_LIBDAXCTL')}
 summary_info += {'libudev':           libudev.found()}
 summary_info += {'rng-none':          config_host.has_key('CONFIG_RNG_NONE')}
 summary_info += {'Linux keyring':     config_host.has_key('CONFIG_SECRET_KEYRING')}
-summary_info += {'FUSE exports':      fuse.found()}
-summary_info += {'FUSE lseek':        fuse_lseek.found()}
 summary(summary_info, bool_yn: true, section: 'Misc')
 
 if not supported_cpus.contains(cpu)
Signature · 1 line
2.26.2
#7 lore raw

PATCH v2 7/8 meson: Display cryto-related information altogether

In reply to Philippe Mathieu-Daudé

---
Cc: Daniel P. Berrange <[email protected]>

---
 meson.build | 34 +++++++++++++++++++---------------
 1 file changed, 19 insertions(+), 15 deletions(-)
meson.build +19 -15
index e372b69f163..9274775a81a 100644
@@ -2453,19 +2453,8 @@
 endif
 summary(summary_info, bool_yn: true, section: 'Block layer support')
 
+# Crypto
 summary_info = {}
-summary_info += {'sparse enabled':    sparse.found()}
-if targetos == 'darwin'
-  summary_info += {'Cocoa support':   cocoa.found()}
-endif
-# TODO: add back version
-summary_info += {'SDL support':       sdl.found()}
-summary_info += {'SDL image support': sdl_image.found()}
-# TODO: add back version
-summary_info += {'GTK support':       gtk.found()}
-summary_info += {'pixman':            pixman.found()}
-# TODO: add back version
-summary_info += {'VTE support':       config_host.has_key('CONFIG_VTE')}
 summary_info += {'TLS priority':      config_host['CONFIG_TLS_PRIORITY']}
 summary_info += {'GNUTLS support':    config_host.has_key('CONFIG_GNUTLS')}
 # TODO: add back version
@@ -2479,6 +2468,24 @@
 if config_host.has_key('CONFIG_NETTLE')
    summary_info += {'  XTS':             not config_host.has_key('CONFIG_QEMU_PRIVATE_XTS')}
 endif
+summary_info += {'crypto afalg':      config_host.has_key('CONFIG_AF_ALG')}
+summary_info += {'rng-none':          config_host.has_key('CONFIG_RNG_NONE')}
+summary_info += {'Linux keyring':     config_host.has_key('CONFIG_SECRET_KEYRING')}
+summary(summary_info, bool_yn: true, section: 'Crypto')
+
+summary_info = {}
+summary_info += {'sparse enabled':    sparse.found()}
+if targetos == 'darwin'
+  summary_info += {'Cocoa support':   cocoa.found()}
+endif
+# TODO: add back version
+summary_info += {'SDL support':       sdl.found()}
+summary_info += {'SDL image support': sdl_image.found()}
+# TODO: add back version
+summary_info += {'GTK support':       gtk.found()}
+summary_info += {'pixman':            pixman.found()}
+# TODO: add back version
+summary_info += {'VTE support':       config_host.has_key('CONFIG_VTE')}
 summary_info += {'libtasn1':          config_host.has_key('CONFIG_TASN1')}
 summary_info += {'PAM':               config_host.has_key('CONFIG_AUTH_PAM')}
 summary_info += {'iconv support':     iconv.found()}
@@ -2531,7 +2538,6 @@
   summary_info += {'QGA MSI support':   config_host.has_key('CONFIG_QGA_MSI')}
 endif
 summary_info += {'seccomp support':   seccomp.found()}
-summary_info += {'crypto afalg':      config_host.has_key('CONFIG_AF_ALG')}
 summary_info += {'GlusterFS support': glusterfs.found()}
 summary_info += {'TPM support':       config_host.has_key('CONFIG_TPM')}
 summary_info += {'libssh support':    config_host.has_key('CONFIG_LIBSSH')}
@@ -2547,8 +2553,6 @@
 summary_info += {'libpmem support':   config_host.has_key('CONFIG_LIBPMEM')}
 summary_info += {'libdaxctl support': config_host.has_key('CONFIG_LIBDAXCTL')}
 summary_info += {'libudev':           libudev.found()}
-summary_info += {'rng-none':          config_host.has_key('CONFIG_RNG_NONE')}
-summary_info += {'Linux keyring':     config_host.has_key('CONFIG_SECRET_KEYRING')}
 summary(summary_info, bool_yn: true, section: 'Misc')
 
 if not supported_cpus.contains(cpu)
Signature · 1 line
2.26.2
#9 lore raw

Re: [PATCH v2 7/8] meson: Display cryto-related information altogether

In reply to Philippe Mathieu-Daudé
Quoted 12 lines · Philippe Mathieu-Daudé

---
Cc: Daniel P. Berrange <[email protected]>

---
 meson.build | 34 +++++++++++++++++++---------------
 1 file changed, 19 insertions(+), 15 deletions(-)
meson.build +0 -0
index e372b69f163..9274775a81a 100644

meson.build line 2456

Quoted 4 lines
meson.build +1 -0
@@ -2453,19 +2453,8 @@
 endif
 summary(summary_info, bool_yn: true, section: 'Block layer support')
 
+# Crypto

Rather than a comment why not introduce grouping in the output so it is visible when reading the summary.

This can be done in meson by calling summary() multiple times giving "section: 'Crypto'" arg.

Quoted 61 lines
meson.build +18 -15
 summary_info = {}
-summary_info += {'sparse enabled':    sparse.found()}
-if targetos == 'darwin'
-  summary_info += {'Cocoa support':   cocoa.found()}
-endif
-# TODO: add back version
-summary_info += {'SDL support':       sdl.found()}
-summary_info += {'SDL image support': sdl_image.found()}
-# TODO: add back version
-summary_info += {'GTK support':       gtk.found()}
-summary_info += {'pixman':            pixman.found()}
-# TODO: add back version
-summary_info += {'VTE support':       config_host.has_key('CONFIG_VTE')}
 summary_info += {'TLS priority':      config_host['CONFIG_TLS_PRIORITY']}
 summary_info += {'GNUTLS support':    config_host.has_key('CONFIG_GNUTLS')}
 # TODO: add back version
@@ -2479,6 +2468,24 @@
 if config_host.has_key('CONFIG_NETTLE')
    summary_info += {'  XTS':             not config_host.has_key('CONFIG_QEMU_PRIVATE_XTS')}
 endif
+summary_info += {'crypto afalg':      config_host.has_key('CONFIG_AF_ALG')}
+summary_info += {'rng-none':          config_host.has_key('CONFIG_RNG_NONE')}
+summary_info += {'Linux keyring':     config_host.has_key('CONFIG_SECRET_KEYRING')}
+summary(summary_info, bool_yn: true, section: 'Crypto')
+
+summary_info = {}
+summary_info += {'sparse enabled':    sparse.found()}
+if targetos == 'darwin'
+  summary_info += {'Cocoa support':   cocoa.found()}
+endif
+# TODO: add back version
+summary_info += {'SDL support':       sdl.found()}
+summary_info += {'SDL image support': sdl_image.found()}
+# TODO: add back version
+summary_info += {'GTK support':       gtk.found()}
+summary_info += {'pixman':            pixman.found()}
+# TODO: add back version
+summary_info += {'VTE support':       config_host.has_key('CONFIG_VTE')}
 summary_info += {'libtasn1':          config_host.has_key('CONFIG_TASN1')}
 summary_info += {'PAM':               config_host.has_key('CONFIG_AUTH_PAM')}
 summary_info += {'iconv support':     iconv.found()}
@@ -2531,7 +2538,6 @@
   summary_info += {'QGA MSI support':   config_host.has_key('CONFIG_QGA_MSI')}
 endif
 summary_info += {'seccomp support':   seccomp.found()}
-summary_info += {'crypto afalg':      config_host.has_key('CONFIG_AF_ALG')}
 summary_info += {'GlusterFS support': glusterfs.found()}
 summary_info += {'TPM support':       config_host.has_key('CONFIG_TPM')}
 summary_info += {'libssh support':    config_host.has_key('CONFIG_LIBSSH')}
@@ -2547,8 +2553,6 @@
 summary_info += {'libpmem support':   config_host.has_key('CONFIG_LIBPMEM')}
 summary_info += {'libdaxctl support': config_host.has_key('CONFIG_LIBDAXCTL')}
 summary_info += {'libudev':           libudev.found()}
-summary_info += {'rng-none':          config_host.has_key('CONFIG_RNG_NONE')}
-summary_info += {'Linux keyring':     config_host.has_key('CONFIG_SECRET_KEYRING')}
 summary(summary_info, bool_yn: true, section: 'Misc')
 
 if not supported_cpus.contains(cpu)
Signature · 1 line
2.26.2

Regards,
Daniel

Signature · 3 lines
|: https://berrange.com      -o-    https://www.flickr.com/photos/dberrange :|
|: https://libvirt.org         -o-            https://fstop138.berrange.com :|
|: https://entangle-photo.org    -o-    https://www.instagram.com/dberrange :|
#10 lore raw

Re: [PATCH v2 7/8] meson: Display cryto-related information altogether

Quoted 16 lines · Daniel P. Berrangé
Quoted 15 lines · Philippe Mathieu-Daudé

---
Cc: Daniel P. Berrange <[email protected]>

---
 meson.build | 34 +++++++++++++++++++---------------
 1 file changed, 19 insertions(+), 15 deletions(-)
meson.build +0 -0
index e372b69f163..9274775a81a 100644
@@ -2453,19 +2453,8 @@
 endif
 summary(summary_info, bool_yn: true, section: 'Block layer support')
 
Quoted 7 lines

meson.build line 2456

Quoted 1 line
meson.build +1 -0
+# Crypto

Rather than a comment why not introduce grouping in the output so it is visible when reading the summary.

This can be done in meson by calling summary() multiple times giving "section: 'Crypto'" arg.

Sigh, I'm not very good at reading this morning. I see this is in fact done in this patch, I just couldn't see it in the diff :-(

...

Quoted 1 line

meson.build line 2474

Quoted 1 line
meson.build +1 -0
+summary(summary_info, bool_yn: true, section: 'Crypto')

Regards,
Daniel

Signature · 3 lines
|: https://berrange.com      -o-    https://www.flickr.com/photos/dberrange :|
|: https://libvirt.org         -o-            https://fstop138.berrange.com :|
|: https://entangle-photo.org    -o-    https://www.instagram.com/dberrange :|
#11 lore raw

Re: [PATCH v2 7/8] meson: Display cryto-related information altogether

Quoted 22 lines · Daniel P. Berrangé
Quoted 21 lines · Daniel P. Berrangé
Quoted 12 lines · Philippe Mathieu-Daudé

---
Cc: Daniel P. Berrange <[email protected]>

---
 meson.build | 34 +++++++++++++++++++---------------
 1 file changed, 19 insertions(+), 15 deletions(-)
meson.build +0 -0
index e372b69f163..9274775a81a 100644

meson.build line 2456

Quoted 4 lines
meson.build +1 -0
@@ -2453,19 +2453,8 @@
 endif
 summary(summary_info, bool_yn: true, section: 'Block layer support')
 
+# Crypto

Rather than a comment why not introduce grouping in the output so it is visible when reading the summary.

Quoted 6 lines
Quoted 2 lines

This can be done in meson by calling summary() multiple times giving "section: 'Crypto'" arg.

Sigh, I'm not very good at reading this morning. I see this is in fact done in this patch, I just couldn't see it in the diff :-(

No worry, I should have describe this better in the commit description.

Quoted 7 lines

...

Quoted 1 line
Quoted 1 line

+summary(summary_info, bool_yn: true, section: 'Crypto')

Regards,
Daniel

#12 lore raw

PATCH v2 8/8 meson: Display library dependencies altogether

In reply to Philippe Mathieu-Daudé
---
 meson.build | 62 ++++++++++++++++++++++++++++-------------------------
 1 file changed, 33 insertions(+), 29 deletions(-)
meson.build +33 -29
index 9274775a81a..8535a83fb70 100644
@@ -2473,6 +2473,7 @@
 summary_info += {'Linux keyring':     config_host.has_key('CONFIG_SECRET_KEYRING')}
 summary(summary_info, bool_yn: true, section: 'Crypto')
 
+# Libraries
 summary_info = {}
 summary_info += {'sparse enabled':    sparse.found()}
 if targetos == 'darwin'
@@ -2503,22 +2504,6 @@
 summary_info += {'brlapi support':    brlapi.found()}
 summary_info += {'vde support':       config_host.has_key('CONFIG_VDE')}
 summary_info += {'netmap support':    config_host.has_key('CONFIG_NETMAP')}
-summary_info += {'Linux AIO support': config_host.has_key('CONFIG_LINUX_AIO')}
-summary_info += {'Linux io_uring support': config_host.has_key('CONFIG_LINUX_IO_URING')}
-summary_info += {'ATTR/XATTR support': libattr.found()}
-summary_info += {'RDMA support':      config_host.has_key('CONFIG_RDMA')}
-summary_info += {'PVRDMA support':    config_host.has_key('CONFIG_PVRDMA')}
-summary_info += {'fdt support':       fdt_opt == 'disabled' ? false : fdt_opt}
-summary_info += {'libcap-ng support': libcap_ng.found()}
-summary_info += {'vhost-kernel support': config_host.has_key('CONFIG_VHOST_KERNEL')}
-summary_info += {'vhost-net support': config_host.has_key('CONFIG_VHOST_NET')}
-summary_info += {'vhost-crypto support': config_host.has_key('CONFIG_VHOST_CRYPTO')}
-summary_info += {'vhost-scsi support': config_host.has_key('CONFIG_VHOST_SCSI')}
-summary_info += {'vhost-vsock support': config_host.has_key('CONFIG_VHOST_VSOCK')}
-summary_info += {'vhost-user support': config_host.has_key('CONFIG_VHOST_USER')}
-summary_info += {'vhost-user-blk server support': have_vhost_user_blk_server}
-summary_info += {'vhost-user-fs support': config_host.has_key('CONFIG_VHOST_USER_FS')}
-summary_info += {'vhost-vdpa support': config_host.has_key('CONFIG_VHOST_VDPA')}
 # TODO: add back protocol and server version
 summary_info += {'spice support':     config_host.has_key('CONFIG_SPICE')}
 summary_info += {'rbd support':       rbd.found()}
@@ -2531,28 +2516,47 @@
 summary_info += {'OpenGL dmabufs':    config_host.has_key('CONFIG_OPENGL_DMABUF')}
 summary_info += {'libiscsi support':  libiscsi.found()}
 summary_info += {'libnfs support':    libnfs.found()}
+summary_info += {'ATTR/XATTR support': libattr.found()}
+summary_info += {'RDMA support':      config_host.has_key('CONFIG_RDMA')}
+summary_info += {'PVRDMA support':    config_host.has_key('CONFIG_PVRDMA')}
+summary_info += {'fdt support':       fdt_opt == 'disabled' ? false : fdt_opt}
+summary_info += {'libcap-ng support': libcap_ng.found()}
+summary_info += {'seccomp support':   seccomp.found()}
+summary_info += {'GlusterFS support': glusterfs.found()}
+summary_info += {'libssh support':    config_host.has_key('CONFIG_LIBSSH')}
+summary_info += {'lzo support':       lzo.found()}
+summary_info += {'snappy support':    snappy.found()}
+summary_info += {'bzip2 support':     libbzip2.found()}
+summary_info += {'lzfse support':     liblzfse.found()}
+summary_info += {'zstd support':      zstd.found()}
+summary_info += {'libxml2':           config_host.has_key('CONFIG_LIBXML2')}
+summary_info += {'capstone':          capstone_opt == 'disabled' ? false : capstone_opt}
+summary_info += {'libpmem support':   config_host.has_key('CONFIG_LIBPMEM')}
+summary_info += {'libdaxctl support': config_host.has_key('CONFIG_LIBDAXCTL')}
+summary_info += {'libudev':           libudev.found()}
+summary(summary_info, bool_yn: true, section: 'Dependencies')
+
+summary_info = {}
+summary_info += {'Linux AIO support': config_host.has_key('CONFIG_LINUX_AIO')}
+summary_info += {'Linux io_uring support': config_host.has_key('CONFIG_LINUX_IO_URING')}
+summary_info += {'vhost-kernel support': config_host.has_key('CONFIG_VHOST_KERNEL')}
+summary_info += {'vhost-net support': config_host.has_key('CONFIG_VHOST_NET')}
+summary_info += {'vhost-crypto support': config_host.has_key('CONFIG_VHOST_CRYPTO')}
+summary_info += {'vhost-scsi support': config_host.has_key('CONFIG_VHOST_SCSI')}
+summary_info += {'vhost-vsock support': config_host.has_key('CONFIG_VHOST_VSOCK')}
+summary_info += {'vhost-user support': config_host.has_key('CONFIG_VHOST_USER')}
+summary_info += {'vhost-user-blk server support': have_vhost_user_blk_server}
+summary_info += {'vhost-user-fs support': config_host.has_key('CONFIG_VHOST_USER_FS')}
+summary_info += {'vhost-vdpa support': config_host.has_key('CONFIG_VHOST_VDPA')}
 summary_info += {'build guest agent': config_host.has_key('CONFIG_GUEST_AGENT')}
 if targetos == 'windows'
   summary_info += {'QGA VSS support':   config_host.has_key('CONFIG_QGA_VSS')}
   summary_info += {'QGA w32 disk info': config_host.has_key('CONFIG_QGA_NTDDSCSI')}
   summary_info += {'QGA MSI support':   config_host.has_key('CONFIG_QGA_MSI')}
 endif
-summary_info += {'seccomp support':   seccomp.found()}
-summary_info += {'GlusterFS support': glusterfs.found()}
 summary_info += {'TPM support':       config_host.has_key('CONFIG_TPM')}
-summary_info += {'libssh support':    config_host.has_key('CONFIG_LIBSSH')}
 summary_info += {'QOM debugging':     config_host.has_key('CONFIG_QOM_CAST_DEBUG')}
-summary_info += {'lzo support':       lzo.found()}
-summary_info += {'snappy support':    snappy.found()}
-summary_info += {'bzip2 support':     libbzip2.found()}
-summary_info += {'lzfse support':     liblzfse.found()}
-summary_info += {'zstd support':      zstd.found()}
 summary_info += {'NUMA host support': config_host.has_key('CONFIG_NUMA')}
-summary_info += {'libxml2':           config_host.has_key('CONFIG_LIBXML2')}
-summary_info += {'capstone':          capstone_opt == 'disabled' ? false : capstone_opt}
-summary_info += {'libpmem support':   config_host.has_key('CONFIG_LIBPMEM')}
-summary_info += {'libdaxctl support': config_host.has_key('CONFIG_LIBDAXCTL')}
-summary_info += {'libudev':           libudev.found()}
 summary(summary_info, bool_yn: true, section: 'Misc')
 
 if not supported_cpus.contains(cpu)
Signature · 1 line
2.26.2
#13 lore raw
In reply to Philippe Mathieu-Daudé
Quoted 18 lines · Philippe Mathieu-Daudé

Reorder stuffs in summary to quicker understand bug reports.

Remove information from deselected features when not necessary.

Since v2:
- integrate Paolo's summary sections
- simpler sort

Philippe Mathieu-Daudé (8):
meson: Summarize information related to directories first
meson: Display host binaries information altogether
meson: Summarize overall features altogether
meson: Summarize compilation-related information altogether
meson: Display accelerators and selected targets altogether
meson: Display block layer information altogether
meson: Display cryto-related information altogether
meson: Display library dependencies altogether

Quoted 3 lines
  meson.build | 295 ++++++++++++++++++++++++++++++----------------------
  1 file changed, 171 insertions(+), 124 deletions(-)

Queued, thanks.

Paolo