arm64: rockchip: Fix PCIe ep-gpios requirement and Add Nanopi M4B

PATCH Applied Chen-Yu Tsai 3 participants 7 messages Jan 21, 2021 – Jan 25, 2021

Subsystems (5)

Device tree bindings PCI Arm Rockchip PCI native host bridge and endpoint drivers +1 more subsystems

lore

Share & tools

lore

Chen-Yu Tsai

author

2021-01-21 16:23 UTC #0 lore raw

v4 cover arm64: rockchip: Fix PCIe ep-gpios requirement and Add Nanopi M4B

From: Chen-Yu Tsai <[email protected]>

Hi everyone,

This is v4 of my Nanopi M4B series.

Changes since v3 include:

- Directly return dev_err_probe() instead of having a separate return statement

Changes since v2 include:

- Replaced dev_err() with dev_err_probe() for gpiod_get_optional() error
- Added Reviewed-by tag from Robin Murphy for patch 3

Changes since v1 include:

- Rewrite subject of patch 1 to match existing convention and reference 'ep-gpios' DT property instead of the 'ep_gpio' field

This series mainly adds support for the new Nanopi M4B, which is a newer variant of the Nanopi M4.

The differences against the original Nanopi M4 that are common with the other M4V2 revision include:

- microphone header removed
- power button added
- recovery button added

Additional changes specific to the M4B:

- USB 3.0 hub removed; board now has 2x USB 3.0 type-A ports and 2x USB 2.0 ports
- ADB toggle switch added; this changes the top USB 3.0 host port to a peripheral port
- Type-C port no longer supports data or PD
- WiFi/Bluetooth combo chip switched to AP6256, which supports BT 5.0 but only 1T1R (down from 2T2R) for WiFi

While working on this, I found that for the M4 family, the PCIe reset pin (from the M.2 expansion board) was not wired to the SoC. Only the NanoPC T4 has this wired. This ended up in patches 1 and 3.

Patch 1 makes ep_gpio in the Rockchip PCIe driver optional. This property is optional in the DT binding, so this just makes the driver adhere to the binding.

Patch 2 adds a new compatible string for the new board.

Patch 3 moves the ep-gpios property of the pcie controller from the common nanopi4.dtsi file to the nanopc-t4.dts file.

Patch 4 adds a new device tree file for the new board. It includes the original device tree for the M4, and then lists the differences.

Given that patch 3 would make PCIe unusable without patch 1, I suggest merging patch 1 through the PCI tree as a fix for 5.11, and the rest for 5.12 through the Rockchip tree.

Please have a look. The changes are mostly trivial.

Regards
ChenYu

Chen-Yu Tsai (4):
PCI: rockchip: Make 'ep-gpios' DT property optional
dt-bindings: arm: rockchip: Add FriendlyARM NanoPi M4B
arm64: dts: rockchip: nanopi4: Move ep-gpios property to nanopc-t4
arm64: dts: rockchip: rk3399: Add NanoPi M4B

 .../devicetree/bindings/arm/rockchip.yaml     |  1 +
 arch/arm64/boot/dts/rockchip/Makefile         |  1 +
 .../boot/dts/rockchip/rk3399-nanopc-t4.dts    |  1 +
 .../boot/dts/rockchip/rk3399-nanopi-m4b.dts   | 52 +++++++++++++++++++
 .../boot/dts/rockchip/rk3399-nanopi4.dtsi     |  1 -
 drivers/pci/controller/pcie-rockchip.c        |  9 ++--
 6 files changed, 59 insertions(+), 6 deletions(-)
 create mode 100644 arch/arm64/boot/dts/rockchip/rk3399-nanopi-m4b.dts

Signature · 7 lines

2.29.2


_______________________________________________
Linux-rockchip mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-rockchip

Chen-Yu Tsai

author

2021-01-21 16:23 UTC #1 lore raw

PATCH v4 1/4 PCI: rockchip: Make 'ep-gpios' DT property optional

From: Chen-Yu Tsai <[email protected]>

The Rockchip PCIe controller DT binding clearly states that 'ep-gpios' is an optional property. And indeed there are boards that don't require it.

Make the driver follow the binding by using devm_gpiod_get_optional() instead of devm_gpiod_get().

Fixes e77f847df54c ("PCI: rockchip: Add Rockchip PCIe controller support")

Fixes 956cd99b35a8 ("PCI: rockchip: Separate common code from RC driver")

Fixes 964bac9455be ("PCI: rockchip: Split out rockchip_pcie_parse_dt() to parse DT")

Signed-off-by Chen-Yu Tsai <[email protected]>

---

Changes since v3:
- Directly return dev_err_probe() instead of having a separate return statement

Changes since v2:
- Fix error message for failed GPIO

Changes since v1:
- Rewrite subject to match existing convention and reference 'ep-gpios' DT property instead of the 'ep_gpio' field

---
 drivers/pci/controller/pcie-rockchip.c | 9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)

drivers/pci/controller/pcie-rockchip.c +4 -5

index 904dec0d3a88..a2ad0b7614a4 100644
@@ -118,11 +118,10 @@ int rockchip_pcie_parse_dt(struct rockchip_pcie *rockchip)
 	}
 
 	if (rockchip->is_rc) {
-		rockchip->ep_gpio = devm_gpiod_get(dev, "ep", GPIOD_OUT_HIGH);
-		if (IS_ERR(rockchip->ep_gpio)) {
-			dev_err(dev, "missing ep-gpios property in node\n");
-			return PTR_ERR(rockchip->ep_gpio);
-		}
+		rockchip->ep_gpio = devm_gpiod_get_optional(dev, "ep", GPIOD_OUT_HIGH);
+		if (IS_ERR(rockchip->ep_gpio))
+			return dev_err_probe(dev, PTR_ERR(rockchip->ep_gpio),
+					     "failed to get ep GPIO\n");
 	}
 
 	rockchip->aclk_pcie = devm_clk_get(dev, "aclk");

Signature · 7 lines

2.29.2


_______________________________________________
Linux-rockchip mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-rockchip

Chen-Yu Tsai

author

2021-01-21 16:23 UTC #2 lore raw

PATCH v4 2/4 dt-bindings: arm: rockchip: Add FriendlyARM NanoPi M4B

In reply to Chen-Yu Tsai

From: Chen-Yu Tsai <[email protected]>

The NanoPi M4B is a minor revision of the original M4.

The differences against the original Nanopi M4 that are common with the other M4V2 revision include:

- microphone header removed
- power button added
- recovery button added

Additional changes specific to the M4B:

Add a compatible string for the new board revision.

Acked-by Rob Herring <[email protected]>

Signed-off-by Chen-Yu Tsai <[email protected]>

---
 Documentation/devicetree/bindings/arm/rockchip.yaml | 1 +
 1 file changed, 1 insertion(+)

Documentation/devicetree/bindings/arm/rockchip.yaml +1 -0

index 8a2dd9f1cff2..c3036f95c7bc 100644
@@ -132,6 +132,7 @@ properties:
           - enum:
               - friendlyarm,nanopc-t4
               - friendlyarm,nanopi-m4
+              - friendlyarm,nanopi-m4b
               - friendlyarm,nanopi-neo4
           - const: rockchip,rk3399

Signature · 7 lines

2.29.2


_______________________________________________
Linux-rockchip mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-rockchip

Chen-Yu Tsai

author

2021-01-21 16:23 UTC #3 lore raw

PATCH v4 3/4 arm64: dts: rockchip: nanopi4: Move ep-gpios property to nanopc-t4

In reply to Chen-Yu Tsai

From: Chen-Yu Tsai <[email protected]>

Only the NanoPC T4 hs the PCIe reset pin routed to the SoC. For the NanoPi M4 family, no such signal is routed to the expansion header on the base board.

As the schematics for the expansion board were not released, it is unclear how this is handled, but the likely answer is that the signal is always pulled high.

Move the ep-gpios property from the common nanopi4.dtsi file to the board level nanopc-t4.dts file. This makes the nanopi-m4 lack ep-gpios, matching the board design.

A companion patch "PCI: rockchip: make ep_gpio optional" for the Linux driver is required, as the driver currently requires the property to be present.

Fixes e7a095908227 ("arm64: dts: rockchip: Add devicetree for NanoPC-T4")

Reviewed-by Robin Murphy <[email protected]>

Signed-off-by Chen-Yu Tsai <[email protected]>

---
 arch/arm64/boot/dts/rockchip/rk3399-nanopc-t4.dts | 1 +
 arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi  | 1 -
 2 files changed, 1 insertion(+), 1 deletion(-)

arch/arm64/boot/dts/rockchip/rk3399-nanopc-t4.dts +1 -0

index e0d75617bb7e..452728b82e42 100644
@@ -95,6 +95,7 @@ map3 {
 };
 
 &pcie0 {
+	ep-gpios = <&gpio2 RK_PA4 GPIO_ACTIVE_HIGH>;
 	num-lanes = <4>;
 	vpcie3v3-supply = <&vcc3v3_sys>;
 };

arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi +0 -1

index 76a8b40a93c6..48ed4aaa37f3 100644
@@ -504,7 +504,6 @@ &pcie_phy {
 };
 
 &pcie0 {
-	ep-gpios = <&gpio2 RK_PA4 GPIO_ACTIVE_HIGH>;
 	max-link-speed = <2>;
 	num-lanes = <2>;
 	vpcie0v9-supply = <&vcca0v9_s3>;

Signature · 7 lines

2.29.2


_______________________________________________
Linux-rockchip mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-rockchip

Chen-Yu Tsai

author

2021-01-21 16:23 UTC #4 lore raw

PATCH v4 4/4 arm64: dts: rockchip: rk3399: Add NanoPi M4B

In reply to Chen-Yu Tsai

From: Chen-Yu Tsai <[email protected]>

The NanoPi M4B is a minor revision of the original M4.

The differences against the original Nanopi M4 that are common with the other M4V2 revision include:

- microphone header removed
- power button added
- recovery button added

Additional changes specific to the M4B:

Add a new dts file for the new board revision that shows the difference against the original.

Signed-off-by Chen-Yu Tsai <[email protected]>

---
 arch/arm64/boot/dts/rockchip/Makefile         |  1 +
 .../boot/dts/rockchip/rk3399-nanopi-m4b.dts   | 52 +++++++++++++++++++
 2 files changed, 53 insertions(+)
 create mode 100644 arch/arm64/boot/dts/rockchip/rk3399-nanopi-m4b.dts

arch/arm64/boot/dts/rockchip/Makefile +1 -0

index b29a445b355a..62d3abc17a24 100644
@@ -34,6 +34,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-kobol-helios64.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-leez-p710.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopc-t4.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopi-m4.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopi-m4b.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopi-neo4.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-orangepi.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-pinebook-pro.dtb

arch/arm64/boot/dts/rockchip/rk3399-nanopi-m4b.dts new file +52 -0

52 lines not on this page · raw message

Signature · 7 lines

2.29.2


_______________________________________________
Linux-rockchip mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-rockchip

Lorenzo Pieralisi

Applied

2021-01-25 17:10 UTC #5 lore raw

In reply to Chen-Yu Tsai

Quoted 8 lines · Chen-Yu Tsai

This is v4 of my Nanopi M4B series.
Changes since v3 include:
- Directly return dev_err_probe() instead of having a separate return statement
[...]

Applied to pci/rockchip (dropped dts patches 3-4), thanks!

[1/2] PCI: rockchip: Make 'ep-gpios' DT property optional

      https://git.kernel.org/lpieralisi/pci/c/96f760cc00
[2/2] dt-bindings: arm: rockchip: Add FriendlyARM NanoPi M4B
      https://git.kernel.org/lpieralisi/pci/c/b205659626

Thanks,
Lorenzo

_______________________________________________
Linux-rockchip mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-rockchip

Heiko Stuebner

maintainer Applied

2021-01-25 23:58 UTC #6 lore raw

Re: (subset) [PATCH v4 0/4] arm64: rockchip: Fix PCIe ep-gpios requirement and Add Nanopi M4B

In reply to Chen-Yu Tsai

Quoted 8 lines · Chen-Yu Tsai

This is v4 of my Nanopi M4B series.
Changes since v3 include:
- Directly return dev_err_probe() instead of having a separate return statement
[...]

Applied, thanks!

[3/4] arm64: dts: rockchip: nanopi4: Move ep-gpios property to nanopc-t4

      commit: 3503376d6cc385b6266f93c24ead9a33d8dfe8cb
[4/4] arm64: dts: rockchip: rk3399: Add NanoPi M4B
      commit: c7b03115003f7f337ab165542cee37148cf30a8a

Best regards,

Signature · 1 line

Heiko Stuebner <[email protected]>