Skip to contentSkip to conversation

kernel-doc: Make the description of return value readable

PATCH In review Jarkko Sakkinen 2 participants 3 messages Jan 25, 2021 – Jan 26, 2021 Documentation

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 kernel-doc: Make the description of return value readable

The description on how to describe return values is over-complicated, and hard to follow. For alien reason, the body of the section is a note, and the first paragraph speaks about 'Return', albeit the section name is actually 'Return:'.

To give a better help when both implementing and reviewing patches, provide a straight-forward guideline, how to decribe return values, instead of providing a note that starts by "blacklisting" one of the infinite possible options of doing it wrong.

This decreases the cumulative amount of time, which is probably substantial, on this otherwise somewhat trivial topic.

---
 Documentation/doc-guide/kernel-doc.rst | 34 +++++++-------------------
 1 file changed, 9 insertions(+), 25 deletions(-)
Documentation/doc-guide/kernel-doc.rst +9 -25
index 79aaa55d6bcf..dc5e1722c150 100644
@@ -136,34 +136,18 @@ Examples::
 Return values
 ~~~~~~~~~~~~~
 
-The return value, if any, should be described in a dedicated section
-named ``Return``.
+The return value, if any, should be described in a dedicated section named
+``Return:``.
 
-.. note::
-
-  #) The multi-line descriptive text you provide does *not* recognize
-     line breaks, so if you try to format some text nicely, as in::
-
-	* Return:
-	* 0 - OK
-	* -EINVAL - invalid argument
-	* -ENOMEM - out of memory
-
-     this will all run together and produce::
-
-	Return: 0 - OK -EINVAL - invalid argument -ENOMEM - out of memory
-
-     So, in order to produce the desired line breaks, you need to use a
-     ReST list, e. g.::
+In order to describe multiple return values, a ReST list should be used. That
+way Sphinx knows how to line-up them properly::
 
-      * Return:
-      * * 0		- OK to runtime suspend the device
-      * * -EBUSY	- Device should not be runtime suspended
+  * Return:
+  * - 0:	The run-time is allowed to suspend the device.
+  * - -EBUSY:	Device should not be suspended.
 
-  #) If the descriptive text you provide has lines that begin with
-     some phrase followed by a colon, each of those phrases will be taken
-     as a new section heading, which probably won't produce the desired
-     effect.
+Using a dash rather than asterisk an is probably a better idea, because it does
+not meddle as much with the C-comments.
 
 Structure, union, and enumeration documentation
 -----------------------------------------------
Signature · 1 line
2.30.0
#1 lore raw

Em Mon, 25 Jan 2021 10:19:04 +0200
Jarkko Sakkinen <[email protected]> escreveu:

Quoted 53 lines

The description on how to describe return values is over-complicated, and hard to follow. For alien reason, the body of the section is a note, and the first paragraph speaks about 'Return', albeit the section name is actually 'Return:'.

To give a better help when both implementing and reviewing patches, provide a straight-forward guideline, how to decribe return values, instead of providing a note that starts by "blacklisting" one of the infinite possible options of doing it wrong.

This decreases the cumulative amount of time, which is probably substantial, on this otherwise somewhat trivial topic.

---
 Documentation/doc-guide/kernel-doc.rst | 34 +++++++-------------------
 1 file changed, 9 insertions(+), 25 deletions(-)
Documentation/doc-guide/kernel-doc.rst +4 -21
index 79aaa55d6bcf..dc5e1722c150 100644
@@ -136,34 +136,18 @@ Examples::
 Return values
 ~~~~~~~~~~~~~
 
-The return value, if any, should be described in a dedicated section
-named ``Return``.
+The return value, if any, should be described in a dedicated section named
+``Return:``.
 
-.. note::
-
-  #) The multi-line descriptive text you provide does *not* recognize
-     line breaks, so if you try to format some text nicely, as in::
-
-	* Return:
-	* 0 - OK
-	* -EINVAL - invalid argument
-	* -ENOMEM - out of memory
-
-     this will all run together and produce::
-
-	Return: 0 - OK -EINVAL - invalid argument -ENOMEM - out of memory
-
-     So, in order to produce the desired line breaks, you need to use a
-     ReST list, e. g.::
+In order to describe multiple return values, a ReST list should be used. That
+way Sphinx knows how to line-up them properly::
 
-      * Return:
-      * * 0		- OK to runtime suspend the device
-      * * -EBUSY	- Device should not be runtime suspended

Documentation/doc-guide/kernel-doc.rst Examples:: · line 150

Quoted 10 lines
Documentation/doc-guide/kernel-doc.rst +5 -4
+  * Return:
+  * - 0:	The run-time is allowed to suspend the device.
+  * - -EBUSY:	Device should not be suspended.
 
-  #) If the descriptive text you provide has lines that begin with
-     some phrase followed by a colon, each of those phrases will be taken
-     as a new section heading, which probably won't produce the desired
-     effect.
+Using a dash rather than asterisk an is probably a better idea, because it does
+not meddle as much with the C-comments.

Well, there are different opinions with that regards... Some devs think that using:

- -EBUSY

is confusing. I ended agreeing with that. That's why the recommendation is to use an asterisk.

Thanks,
Mauro

#2 lore raw
Quoted 70 lines · Mauro Carvalho Chehab

Em Mon, 25 Jan 2021 10:19:04 +0200
Jarkko Sakkinen <[email protected]> escreveu:

Quoted 53 lines

The description on how to describe return values is over-complicated, and hard to follow. For alien reason, the body of the section is a note, and the first paragraph speaks about 'Return', albeit the section name is actually 'Return:'.

To give a better help when both implementing and reviewing patches, provide a straight-forward guideline, how to decribe return values, instead of providing a note that starts by "blacklisting" one of the infinite possible options of doing it wrong.

This decreases the cumulative amount of time, which is probably substantial, on this otherwise somewhat trivial topic.

---
 Documentation/doc-guide/kernel-doc.rst | 34 +++++++-------------------
 1 file changed, 9 insertions(+), 25 deletions(-)
Documentation/doc-guide/kernel-doc.rst +4 -21
index 79aaa55d6bcf..dc5e1722c150 100644
@@ -136,34 +136,18 @@ Examples::
 Return values
 ~~~~~~~~~~~~~
 
-The return value, if any, should be described in a dedicated section
-named ``Return``.
+The return value, if any, should be described in a dedicated section named
+``Return:``.
 
-.. note::
-
-  #) The multi-line descriptive text you provide does *not* recognize
-     line breaks, so if you try to format some text nicely, as in::
-
-	* Return:
-	* 0 - OK
-	* -EINVAL - invalid argument
-	* -ENOMEM - out of memory
-
-     this will all run together and produce::
-
-	Return: 0 - OK -EINVAL - invalid argument -ENOMEM - out of memory
-
-     So, in order to produce the desired line breaks, you need to use a
-     ReST list, e. g.::
+In order to describe multiple return values, a ReST list should be used. That
+way Sphinx knows how to line-up them properly::
 
-      * Return:
-      * * 0		- OK to runtime suspend the device
-      * * -EBUSY	- Device should not be runtime suspended

Documentation/doc-guide/kernel-doc.rst Examples:: · line 150

Quoted 10 lines
Documentation/doc-guide/kernel-doc.rst +5 -4
+  * Return:
+  * - 0:	The run-time is allowed to suspend the device.
+  * - -EBUSY:	Device should not be suspended.
 
-  #) If the descriptive text you provide has lines that begin with
-     some phrase followed by a colon, each of those phrases will be taken
-     as a new section heading, which probably won't produce the desired
-     effect.
+Using a dash rather than asterisk an is probably a better idea, because it does
+not meddle as much with the C-comments.

Well, there are different opinions with that regards... Some devs think that using:

Quoted 4 lines

- -EBUSY

is confusing. I ended agreeing with that. That's why the recommendation is to use an asterisk.

Maybe then whitelisting two options would be the way to move forward?

Quoted 2 lines

Thanks,
Mauro

/Jarkko