Skip to contentSkip to conversation

mmc: aspeed: move kunit test into separate module

PATCH In review Arnd Bergmann 2 participants 2 messages Jan 25, 2021 – Jan 26, 2021

Subsystems (4)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 mmc: aspeed: move kunit test into separate module

From: Arnd Bergmann <[email protected]>

Having both the driver and the unit test in the same module leads to a link failure because of the extra init/exit functions:

drivers/mmc/host/sdhci-of-aspeed-test.c:98:1: error: redefinition of '__inittest' kunit_test_suite(aspeed_sdhci_test_suite);

Make it a separate module instead.

---
 drivers/mmc/host/Kconfig                |  2 +-
 drivers/mmc/host/Makefile               |  1 +
 drivers/mmc/host/sdhci-of-aspeed-test.c |  5 +++++
 drivers/mmc/host/sdhci-of-aspeed.c      | 11 ++++-------
 drivers/mmc/host/sdhci-of-aspeed.h      | 10 ++++++++++
 5 files changed, 21 insertions(+), 8 deletions(-)
 create mode 100644 drivers/mmc/host/sdhci-of-aspeed.h
drivers/mmc/host/Kconfig +1 -1
index d6f00d1d6251..a248f9f6be91 100644
@@ -169,7 +169,7 @@ config MMC_SDHCI_OF_ASPEED
 	  If unsure, say N.
 
 config MMC_SDHCI_OF_ASPEED_TEST
-	bool "Tests for the ASPEED SDHCI driver"
+	tristate "Tests for the ASPEED SDHCI driver"
 	depends on MMC_SDHCI_OF_ASPEED && KUNIT=y
 	help
 	  Enable KUnit tests for the ASPEED SDHCI driver. Select this
drivers/mmc/host/Makefile +1 -0
index 451c25fc2c69..5cc7e5f13587 100644
@@ -90,6 +90,7 @@ obj-$(CONFIG_MMC_SDHCI_DOVE)		+= sdhci-dove.o
 obj-$(CONFIG_MMC_SDHCI_TEGRA)		+= sdhci-tegra.o
 obj-$(CONFIG_MMC_SDHCI_OF_ARASAN)	+= sdhci-of-arasan.o
 obj-$(CONFIG_MMC_SDHCI_OF_ASPEED)	+= sdhci-of-aspeed.o
+obj-$(CONFIG_MMC_SDHCI_OF_ASPEED_TEST)  += sdhci-of-aspeed-test.o
 obj-$(CONFIG_MMC_SDHCI_OF_AT91)		+= sdhci-of-at91.o
 obj-$(CONFIG_MMC_SDHCI_OF_ESDHC)	+= sdhci-of-esdhc.o
 obj-$(CONFIG_MMC_SDHCI_OF_HLWD)		+= sdhci-of-hlwd.o
drivers/mmc/host/sdhci-of-aspeed-test.c +5 -0
index 34070605b28b..e7e42991534a 100644
@@ -2,6 +2,7 @@
 /* Copyright (C) 2020 IBM Corp. */
 
 #include <kunit/test.h>
+#include "sdhci-of-aspeed.h"
 
 static void aspeed_sdhci_phase_ddr52(struct kunit *test)
 {
@@ -96,3 +97,7 @@ static struct kunit_suite aspeed_sdhci_test_suite = {
 	.test_cases = aspeed_sdhci_test_cases,
 };
 kunit_test_suite(aspeed_sdhci_test_suite);
+
+MODULE_DESCRIPTION("Unit test for the ASPEED SD/SDIO/SDHCI Controllers");
+MODULE_AUTHOR("Andrew Jeffery <[email protected]>");
+MODULE_LICENSE("GPL");
drivers/mmc/host/sdhci-of-aspeed.c +4 -7
index 3b0d381e1215..dcc80099f528 100644
@@ -15,6 +15,7 @@
 #include <linux/platform_device.h>
 #include <linux/spinlock.h>
 
+#include "sdhci-of-aspeed.h"
 #include "sdhci-pltfm.h"
 
 #define ASPEED_SDC_INFO			0x00
@@ -42,7 +43,6 @@ struct aspeed_sdc {
 struct aspeed_sdhci_tap_param {
 	bool valid;
 
-#define ASPEED_SDHCI_TAP_PARAM_INVERT_CLK	BIT(4)
 	u8 in;
 	u8 out;
 };
@@ -123,8 +123,8 @@ aspeed_sdc_set_phase_taps(struct aspeed_sdc *sdc,
 #define ASPEED_SDHCI_NR_TAPS		15
 /* Measured value with *handwave* environmentals and static loading */
 #define ASPEED_SDHCI_MAX_TAP_DELAY_PS	1253
-static int aspeed_sdhci_phase_to_tap(struct device *dev, unsigned long rate_hz,
-				     int phase_deg)
+int aspeed_sdhci_phase_to_tap(struct device *dev, unsigned long rate_hz,
+			      int phase_deg)
 {
 	u64 phase_period_ps;
 	u64 prop_delay_ps;
@@ -158,6 +158,7 @@ static int aspeed_sdhci_phase_to_tap(struct device *dev, unsigned long rate_hz,
 
 	return inverted | tap;
 }
+EXPORT_SYMBOL_GPL(aspeed_sdhci_phase_to_tap);
 
 static void
 aspeed_sdhci_phases_to_taps(struct device *dev, unsigned long rate,
@@ -579,10 +580,6 @@ static void __exit aspeed_sdc_exit(void)
 }
 module_exit(aspeed_sdc_exit);
 
-#if defined(CONFIG_MMC_SDHCI_OF_ASPEED_TEST)
-#include "sdhci-of-aspeed-test.c"
-#endif
-
 MODULE_DESCRIPTION("Driver for the ASPEED SD/SDIO/SDHCI Controllers");
 MODULE_AUTHOR("Ryan Chen <[email protected]>");
 MODULE_AUTHOR("Andrew Jeffery <[email protected]>");
drivers/mmc/host/sdhci-of-aspeed.h new file +10 -0
new file mode 100644
index 000000000000..931e70781d08
@@ -0,0 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+#ifndef _SDHCI_OF_ASPEED_H
+#define _SDHCI_OF_ASPEED_H
+
+struct device;
+int aspeed_sdhci_phase_to_tap(struct device *dev, unsigned long rate_hz,
+			      int phase_deg);
+#define ASPEED_SDHCI_TAP_PARAM_INVERT_CLK	BIT(4)
+
+#endif /* _SDHCI_OF_ASPEED_H */
Signature · 1 line
2.29.2
#1 lore raw
Quoted 6 lines · Arnd Bergmann

From: Arnd Bergmann <[email protected]>

Having both the driver and the unit test in the same module leads to a link failure because of the extra init/exit functions:

Quoted 6 lines

drivers/mmc/host/sdhci-of-aspeed-test.c:98:1: error: redefinition of '__inittest' kunit_test_suite(aspeed_sdhci_test_suite);

Make it a separate module instead.

Arnd, thanks for the patch and for your help! However, this time Andrew already posted a similar patch [1] to fix the problem, which I have just applied.

[1]
https://patchwork.kernel.org/project/linux-mmc/patch/20210122114852.3790565-1-andrew at aj.id.au/

Kind regards
Uffe

Quoted 123 lines
---
 drivers/mmc/host/Kconfig                |  2 +-
 drivers/mmc/host/Makefile               |  1 +
 drivers/mmc/host/sdhci-of-aspeed-test.c |  5 +++++
 drivers/mmc/host/sdhci-of-aspeed.c      | 11 ++++-------
 drivers/mmc/host/sdhci-of-aspeed.h      | 10 ++++++++++
 5 files changed, 21 insertions(+), 8 deletions(-)
 create mode 100644 drivers/mmc/host/sdhci-of-aspeed.h
drivers/mmc/host/Kconfig +1 -1
index d6f00d1d6251..a248f9f6be91 100644
@@ -169,7 +169,7 @@ config MMC_SDHCI_OF_ASPEED
          If unsure, say N.
 
 config MMC_SDHCI_OF_ASPEED_TEST
-       bool "Tests for the ASPEED SDHCI driver"
+       tristate "Tests for the ASPEED SDHCI driver"
        depends on MMC_SDHCI_OF_ASPEED && KUNIT=y
        help
          Enable KUnit tests for the ASPEED SDHCI driver. Select this
drivers/mmc/host/Makefile +1 -0
index 451c25fc2c69..5cc7e5f13587 100644
@@ -90,6 +90,7 @@ obj-$(CONFIG_MMC_SDHCI_DOVE)          += sdhci-dove.o
 obj-$(CONFIG_MMC_SDHCI_TEGRA)          += sdhci-tegra.o
 obj-$(CONFIG_MMC_SDHCI_OF_ARASAN)      += sdhci-of-arasan.o
 obj-$(CONFIG_MMC_SDHCI_OF_ASPEED)      += sdhci-of-aspeed.o
+obj-$(CONFIG_MMC_SDHCI_OF_ASPEED_TEST)  += sdhci-of-aspeed-test.o
 obj-$(CONFIG_MMC_SDHCI_OF_AT91)                += sdhci-of-at91.o
 obj-$(CONFIG_MMC_SDHCI_OF_ESDHC)       += sdhci-of-esdhc.o
 obj-$(CONFIG_MMC_SDHCI_OF_HLWD)                += sdhci-of-hlwd.o
drivers/mmc/host/sdhci-of-aspeed-test.c +5 -0
index 34070605b28b..e7e42991534a 100644
@@ -2,6 +2,7 @@
 /* Copyright (C) 2020 IBM Corp. */
 
 #include <kunit/test.h>
+#include "sdhci-of-aspeed.h"
 
 static void aspeed_sdhci_phase_ddr52(struct kunit *test)
 {
@@ -96,3 +97,7 @@ static struct kunit_suite aspeed_sdhci_test_suite = {
        .test_cases = aspeed_sdhci_test_cases,
 };
 kunit_test_suite(aspeed_sdhci_test_suite);
+
+MODULE_DESCRIPTION("Unit test for the ASPEED SD/SDIO/SDHCI Controllers");
+MODULE_AUTHOR("Andrew Jeffery <[email protected]>");
+MODULE_LICENSE("GPL");
drivers/mmc/host/sdhci-of-aspeed.c +4 -7
index 3b0d381e1215..dcc80099f528 100644
@@ -15,6 +15,7 @@
 #include <linux/platform_device.h>
 #include <linux/spinlock.h>
 
+#include "sdhci-of-aspeed.h"
 #include "sdhci-pltfm.h"
 
 #define ASPEED_SDC_INFO                        0x00
@@ -42,7 +43,6 @@ struct aspeed_sdc {
 struct aspeed_sdhci_tap_param {
        bool valid;
 
-#define ASPEED_SDHCI_TAP_PARAM_INVERT_CLK      BIT(4)
        u8 in;
        u8 out;
 };
@@ -123,8 +123,8 @@ aspeed_sdc_set_phase_taps(struct aspeed_sdc *sdc,
 #define ASPEED_SDHCI_NR_TAPS           15
 /* Measured value with *handwave* environmentals and static loading */
 #define ASPEED_SDHCI_MAX_TAP_DELAY_PS  1253
-static int aspeed_sdhci_phase_to_tap(struct device *dev, unsigned long rate_hz,
-                                    int phase_deg)
+int aspeed_sdhci_phase_to_tap(struct device *dev, unsigned long rate_hz,
+                             int phase_deg)
 {
        u64 phase_period_ps;
        u64 prop_delay_ps;
@@ -158,6 +158,7 @@ static int aspeed_sdhci_phase_to_tap(struct device *dev, unsigned long rate_hz,
 
        return inverted | tap;
 }
+EXPORT_SYMBOL_GPL(aspeed_sdhci_phase_to_tap);
 
 static void
 aspeed_sdhci_phases_to_taps(struct device *dev, unsigned long rate,
@@ -579,10 +580,6 @@ static void __exit aspeed_sdc_exit(void)
 }
 module_exit(aspeed_sdc_exit);
 
-#if defined(CONFIG_MMC_SDHCI_OF_ASPEED_TEST)
-#include "sdhci-of-aspeed-test.c"
-#endif
-
 MODULE_DESCRIPTION("Driver for the ASPEED SD/SDIO/SDHCI Controllers");
 MODULE_AUTHOR("Ryan Chen <[email protected]>");
 MODULE_AUTHOR("Andrew Jeffery <[email protected]>");
drivers/mmc/host/sdhci-of-aspeed.h new file +10 -1
new file mode 100644
index 000000000000..931e70781d08
@@ -0,0 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+#ifndef _SDHCI_OF_ASPEED_H
+#define _SDHCI_OF_ASPEED_H
+
+struct device;
+int aspeed_sdhci_phase_to_tap(struct device *dev, unsigned long rate_hz,
+                             int phase_deg);
+#define ASPEED_SDHCI_TAP_PARAM_INVERT_CLK      BIT(4)
+
+#endif /* _SDHCI_OF_ASPEED_H */
--

2.29.2