Skip to contentSkip to conversation

doc: remove illegal characters

PATCH New Heinrich Schuchardt 3 participants 6 messages Jan 25, 2021 – Jan 26, 2021 SiFive drivers

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 doc: remove illegal characters

Avoid errors when generating the HTML documentation like:

    'ascii' codec can't decode byte 0xc2

Correct capitalization of 'U-Boot'.

---
 doc/board/freescale/b4860qds.rst    |  2 +-
 doc/board/microchip/mpfs_icicle.rst |  4 ++--
 doc/board/sifive/fu540.rst          |  2 +-
 doc/board/xen/xenguest_arm64.rst    | 14 +++++++-------
 doc/driver-model/design.rst         |  2 +-
 doc/usage/bootmenu.rst              |  2 +-
 6 files changed, 13 insertions(+), 13 deletions(-)
doc/board/freescale/b4860qds.rst +1 -1
index de14d857b9..efb1422e1c 100644
@@ -9,7 +9,7 @@ The B4860QDS is a Freescale reference board that hosts the B4860 SoC
 B4860 Overview
 --------------
 The B4860 QorIQ Qonverge device is a Freescale high-end, multicore SoC based on
-StarCore and Power Architecture? cores. It targets the broadband wireless
+StarCore and Power Architecture cores. It targets the broadband wireless
 infrastructure and builds upon the proven success of the existing multicore
 DSPs and Power CPUs. It is designed to bolster the rapidly changing and
 expanding wireless markets, such as 3GLTE (FDD and TDD), LTE-Advanced, and UMTS.
doc/board/microchip/mpfs_icicle.rst +2 -2
index c71c2f3cab..1f9ce13a3c 100644
@@ -702,9 +702,9 @@ Sample boot log from MPFS Icicle Kit
    [    2.756098] systemd[1]: Created slice User and Session Slice.
    [  OK  ] Created slice User and Session Slice.
    [    2.789065] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
-   [  OK  ] Started Dispatch Password ?ts to Console Directory Watch.
+   [  OK  ] Started Dispatch Password ..ts to Console Directory Watch.
    [    2.828974] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
-   [  OK  ] Started Forward Password R?uests to Wall Directory Watch.
+   [  OK  ] Started Forward Password R..uests to Wall Directory Watch.
    [    2.869009] systemd[1]: Reached target Paths.
    [  OK  ] Reached target Paths.
    [    2.898808] systemd[1]: Reached target Remote File Systems.
doc/board/sifive/fu540.rst +1 -1
index 4e4c852ff3..c8091f6490 100644
@@ -5,7 +5,7 @@ HiFive Unleashed
 
 FU540-C000 RISC-V SoC
 ---------------------
-The FU540-C000 is the world?s first 4+1 64-bit RISC-V SoC from SiFive.
+The FU540-C000 is the world's first 4+1 64-bit RISC-V SoC from SiFive.
 
 The HiFive Unleashed development platform is based on FU540-C000 and capable
 of running Linux.
doc/board/xen/xenguest_arm64.rst +7 -7
index 1327f88f99..31a5c23dfd 100644
@@ -6,17 +6,17 @@ Xen guest ARM64 board
 This board specification
 ------------------------
 
-This board is to be run as a virtual Xen [1] guest with U-boot as its primary
+This board is to be run as a virtual Xen [1] guest with U-Boot as its primary
 bootloader. Xen is a type 1 hypervisor that allows multiple operating systems
 to run simultaneously on a single physical server. Xen is capable of running
 virtual machines in both full virtualization and para-virtualization (PV)
-modes. Xen runs virtual machines, which are called ?domains?.
+modes. Xen runs virtual machines, which are called "domains".
 
 Paravirtualized drivers are a special type of device drivers that are used in
 a guest system in the Xen domain and perform I/O operations using a special
 interface provided by the virtualization system and the host system.
 
-Xen support for U-boot is implemented by introducing a new Xen guest ARM64
+Xen support for U-Boot is implemented by introducing a new Xen guest ARM64
 board and porting essential drivers from MiniOS [3] as well as some of the work
 previously done by NXP [4]:
 
@@ -39,7 +39,7 @@ previously done by NXP [4]:
 Board limitations
 -----------------
 
-1. U-boot runs without MMU enabled at the early stages.
+1. U-Boot runs without MMU enabled at the early stages.
    According to Xen on ARM ABI (xen/include/public/arch-arm.h): all memory
    which is shared with other entities in the system (including the hypervisor
    and other guests) must reside in memory which is mapped as Normal Inner
@@ -54,14 +54,14 @@ Board limitations
 2. No serial console until MMU is up.
    Because data cache maintenance is required until the MMU setup the
    early/debug serial console is not implemented. Therefore, we do not have
-   usual prints like U-boot?s banner etc. until the serial driver is
+   usual prints like U-Boot's banner etc. until the serial driver is
    initialized.
 
 3. Single RAM bank supported.
    If a Xen guest is given much memory it is possible that Xen allocates two
    memory banks for it. The first one is allocated under 4GB address space and
-   in some cases may represent the whole guest?s memory. It is assumed that
-   U-boot most likely won?t require high memory bank for its work andlaunching
+   in some cases may represent the whole guest's memory. It is assumed that
+   U-Boot most likely won't require high memory bank for its work andlaunching
    OS, so it is enough to take the first one.
 
 
doc/driver-model/design.rst +1 -1
index ffed7d5f79..93a9f3dc41 100644
@@ -10,7 +10,7 @@ by:
 
    * Marek Vasut <[email protected]>
    * Pavel Herrmann <[email protected]>
-   * Viktor K?iv?k <[email protected]>
+   * Viktor Krivak <[email protected]>
    * Tomas Hlavacek <[email protected]>
 
 This has been both simplified and extended into the current implementation
doc/usage/bootmenu.rst +1 -1
index 1f094ad6ed..44654acced 100644
@@ -1,5 +1,5 @@
 .. SPDX-License-Identifier: GPL-2.0+
-.. (C) Copyright 2011-2012 Pali Roh?r <[email protected]>
+.. (C) Copyright 2011-2012 Pali Rohar <[email protected]>
 
 bootmenu command
 ================

--
2.29.2

#1 lore raw

PATCH 1/1 doc: remove illegal characters

Hello Heinrich!

Does this change mean that UTF-8 is now disallowed in U-Boot?

Quoted 3 lines · On Monday 25 January 2021 22:48:56 Heinrich Schuchardt wrote:

Avoid errors when generating the HTML documentation like:

    'ascii' codec can't decode byte 0xc2

This sounds like an incorrect configuration of tool which is generating HTML documentation.

Quoted 133 lines

Correct capitalization of 'U-Boot'.

---
 doc/board/freescale/b4860qds.rst    |  2 +-
 doc/board/microchip/mpfs_icicle.rst |  4 ++--
 doc/board/sifive/fu540.rst          |  2 +-
 doc/board/xen/xenguest_arm64.rst    | 14 +++++++-------
 doc/driver-model/design.rst         |  2 +-
 doc/usage/bootmenu.rst              |  2 +-
 6 files changed, 13 insertions(+), 13 deletions(-)
doc/board/freescale/b4860qds.rst +1 -1
index de14d857b9..efb1422e1c 100644
@@ -9,7 +9,7 @@ The B4860QDS is a Freescale reference board that hosts the B4860 SoC
 B4860 Overview
 --------------
 The B4860 QorIQ Qonverge device is a Freescale high-end, multicore SoC based on
-StarCore and Power Architecture? cores. It targets the broadband wireless
+StarCore and Power Architecture cores. It targets the broadband wireless
 infrastructure and builds upon the proven success of the existing multicore
 DSPs and Power CPUs. It is designed to bolster the rapidly changing and
 expanding wireless markets, such as 3GLTE (FDD and TDD), LTE-Advanced, and UMTS.
doc/board/microchip/mpfs_icicle.rst +2 -2
index c71c2f3cab..1f9ce13a3c 100644
@@ -702,9 +702,9 @@ Sample boot log from MPFS Icicle Kit
    [    2.756098] systemd[1]: Created slice User and Session Slice.
    [  OK  ] Created slice User and Session Slice.
    [    2.789065] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
-   [  OK  ] Started Dispatch Password ?ts to Console Directory Watch.
+   [  OK  ] Started Dispatch Password ..ts to Console Directory Watch.
    [    2.828974] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
-   [  OK  ] Started Forward Password R?uests to Wall Directory Watch.
+   [  OK  ] Started Forward Password R..uests to Wall Directory Watch.
    [    2.869009] systemd[1]: Reached target Paths.
    [  OK  ] Reached target Paths.
    [    2.898808] systemd[1]: Reached target Remote File Systems.
doc/board/sifive/fu540.rst +1 -1
index 4e4c852ff3..c8091f6490 100644
@@ -5,7 +5,7 @@ HiFive Unleashed
 
 FU540-C000 RISC-V SoC
 ---------------------
-The FU540-C000 is the world?s first 4+1 64-bit RISC-V SoC from SiFive.
+The FU540-C000 is the world's first 4+1 64-bit RISC-V SoC from SiFive.
 
 The HiFive Unleashed development platform is based on FU540-C000 and capable
 of running Linux.
doc/board/xen/xenguest_arm64.rst +7 -7
index 1327f88f99..31a5c23dfd 100644
@@ -6,17 +6,17 @@ Xen guest ARM64 board
 This board specification
 ------------------------
 
-This board is to be run as a virtual Xen [1] guest with U-boot as its primary
+This board is to be run as a virtual Xen [1] guest with U-Boot as its primary
 bootloader. Xen is a type 1 hypervisor that allows multiple operating systems
 to run simultaneously on a single physical server. Xen is capable of running
 virtual machines in both full virtualization and para-virtualization (PV)
-modes. Xen runs virtual machines, which are called ?domains?.
+modes. Xen runs virtual machines, which are called "domains".
 
 Paravirtualized drivers are a special type of device drivers that are used in
 a guest system in the Xen domain and perform I/O operations using a special
 interface provided by the virtualization system and the host system.
 
-Xen support for U-boot is implemented by introducing a new Xen guest ARM64
+Xen support for U-Boot is implemented by introducing a new Xen guest ARM64
 board and porting essential drivers from MiniOS [3] as well as some of the work
 previously done by NXP [4]:
 
@@ -39,7 +39,7 @@ previously done by NXP [4]:
 Board limitations
 -----------------
 
-1. U-boot runs without MMU enabled at the early stages.
+1. U-Boot runs without MMU enabled at the early stages.
    According to Xen on ARM ABI (xen/include/public/arch-arm.h): all memory
    which is shared with other entities in the system (including the hypervisor
    and other guests) must reside in memory which is mapped as Normal Inner
@@ -54,14 +54,14 @@ Board limitations
 2. No serial console until MMU is up.
    Because data cache maintenance is required until the MMU setup the
    early/debug serial console is not implemented. Therefore, we do not have
-   usual prints like U-boot?s banner etc. until the serial driver is
+   usual prints like U-Boot's banner etc. until the serial driver is
    initialized.
 
 3. Single RAM bank supported.
    If a Xen guest is given much memory it is possible that Xen allocates two
    memory banks for it. The first one is allocated under 4GB address space and
-   in some cases may represent the whole guest?s memory. It is assumed that
-   U-boot most likely won?t require high memory bank for its work andlaunching
+   in some cases may represent the whole guest's memory. It is assumed that
+   U-Boot most likely won't require high memory bank for its work andlaunching
    OS, so it is enough to take the first one.
 
 
doc/driver-model/design.rst +1 -1
index ffed7d5f79..93a9f3dc41 100644
@@ -10,7 +10,7 @@ by:
 
    * Marek Vasut <[email protected]>
    * Pavel Herrmann <[email protected]>
-   * Viktor K?iv?k <[email protected]>
+   * Viktor Krivak <[email protected]>
    * Tomas Hlavacek <[email protected]>
 
 This has been both simplified and extended into the current implementation
doc/usage/bootmenu.rst +1 -2
index 1f094ad6ed..44654acced 100644
@@ -1,5 +1,5 @@
 .. SPDX-License-Identifier: GPL-2.0+
-.. (C) Copyright 2011-2012 Pali Roh?r <[email protected]>
+.. (C) Copyright 2011-2012 Pali Rohar <[email protected]>
 
 bootmenu command
 ================
--

2.29.2

#2 lore raw

PATCH 1/1 doc: remove illegal characters

Quoted 11 lines · Pali Roh?r

Hello Heinrich!

Does this change mean that UTF-8 is now disallowed in U-Boot?

Quoted 3 lines · On Monday 25 January 2021 22:48:56 Heinrich Schuchardt wrote:

Avoid errors when generating the HTML documentation like:

     'ascii' codec can't decode byte 0xc2

This sounds like an incorrect configuration of tool which is generating HTML documentation.

Sphinx uses as default:

source_encoding = 'utf-8-sig'

With Sphinx 3 on my machine I have no problem. But with Sphinx 2 on Gitlab an error is ejected for Unicode letters.

I do not know if elder Sphinx versions require a BOM to mark a file as UTF-8 when using utf-8-sig.

Best regards

Heinrich

Quoted 134 lines
Quoted 134 lines

Correct capitalization of 'U-Boot'.

---
  doc/board/freescale/b4860qds.rst    |  2 +-
  doc/board/microchip/mpfs_icicle.rst |  4 ++--
  doc/board/sifive/fu540.rst          |  2 +-
  doc/board/xen/xenguest_arm64.rst    | 14 +++++++-------
  doc/driver-model/design.rst         |  2 +-
  doc/usage/bootmenu.rst              |  2 +-
  6 files changed, 13 insertions(+), 13 deletions(-)
doc/board/freescale/b4860qds.rst +1 -1
index de14d857b9..efb1422e1c 100644
@@ -9,7 +9,7 @@ The B4860QDS is a Freescale reference board that hosts the B4860 SoC
  B4860 Overview
  --------------
  The B4860 QorIQ Qonverge device is a Freescale high-end, multicore SoC based on
-StarCore and Power Architecture? cores. It targets the broadband wireless
+StarCore and Power Architecture cores. It targets the broadband wireless
  infrastructure and builds upon the proven success of the existing multicore
  DSPs and Power CPUs. It is designed to bolster the rapidly changing and
  expanding wireless markets, such as 3GLTE (FDD and TDD), LTE-Advanced, and UMTS.
doc/board/microchip/mpfs_icicle.rst +2 -2
index c71c2f3cab..1f9ce13a3c 100644
@@ -702,9 +702,9 @@ Sample boot log from MPFS Icicle Kit
     [    2.756098] systemd[1]: Created slice User and Session Slice.
     [  OK  ] Created slice User and Session Slice.
     [    2.789065] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
-   [  OK  ] Started Dispatch Password ?ts to Console Directory Watch.
+   [  OK  ] Started Dispatch Password ..ts to Console Directory Watch.
     [    2.828974] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
-   [  OK  ] Started Forward Password R?uests to Wall Directory Watch.
+   [  OK  ] Started Forward Password R..uests to Wall Directory Watch.
     [    2.869009] systemd[1]: Reached target Paths.
     [  OK  ] Reached target Paths.
     [    2.898808] systemd[1]: Reached target Remote File Systems.
doc/board/sifive/fu540.rst +1 -1
index 4e4c852ff3..c8091f6490 100644
@@ -5,7 +5,7 @@ HiFive Unleashed
 
  FU540-C000 RISC-V SoC
  ---------------------
-The FU540-C000 is the world?s first 4+1 64-bit RISC-V SoC from SiFive.
+The FU540-C000 is the world's first 4+1 64-bit RISC-V SoC from SiFive.
 
  The HiFive Unleashed development platform is based on FU540-C000 and capable
  of running Linux.
doc/board/xen/xenguest_arm64.rst +7 -7
index 1327f88f99..31a5c23dfd 100644
@@ -6,17 +6,17 @@ Xen guest ARM64 board
  This board specification
  ------------------------
 
-This board is to be run as a virtual Xen [1] guest with U-boot as its primary
+This board is to be run as a virtual Xen [1] guest with U-Boot as its primary
  bootloader. Xen is a type 1 hypervisor that allows multiple operating systems
  to run simultaneously on a single physical server. Xen is capable of running
  virtual machines in both full virtualization and para-virtualization (PV)
-modes. Xen runs virtual machines, which are called ?domains?.
+modes. Xen runs virtual machines, which are called "domains".
 
  Paravirtualized drivers are a special type of device drivers that are used in
  a guest system in the Xen domain and perform I/O operations using a special
  interface provided by the virtualization system and the host system.
 
-Xen support for U-boot is implemented by introducing a new Xen guest ARM64
+Xen support for U-Boot is implemented by introducing a new Xen guest ARM64
  board and porting essential drivers from MiniOS [3] as well as some of the work
  previously done by NXP [4]:
 
@@ -39,7 +39,7 @@ previously done by NXP [4]:
  Board limitations
  -----------------
 
-1. U-boot runs without MMU enabled at the early stages.
+1. U-Boot runs without MMU enabled at the early stages.
     According to Xen on ARM ABI (xen/include/public/arch-arm.h): all memory
     which is shared with other entities in the system (including the hypervisor
     and other guests) must reside in memory which is mapped as Normal Inner
@@ -54,14 +54,14 @@ Board limitations
  2. No serial console until MMU is up.
     Because data cache maintenance is required until the MMU setup the
     early/debug serial console is not implemented. Therefore, we do not have
-   usual prints like U-boot?s banner etc. until the serial driver is
+   usual prints like U-Boot's banner etc. until the serial driver is
     initialized.
 
  3. Single RAM bank supported.
     If a Xen guest is given much memory it is possible that Xen allocates two
     memory banks for it. The first one is allocated under 4GB address space and
-   in some cases may represent the whole guest?s memory. It is assumed that
-   U-boot most likely won?t require high memory bank for its work andlaunching
+   in some cases may represent the whole guest's memory. It is assumed that
+   U-Boot most likely won't require high memory bank for its work andlaunching
     OS, so it is enough to take the first one.
 
 
doc/driver-model/design.rst +1 -1
index ffed7d5f79..93a9f3dc41 100644
@@ -10,7 +10,7 @@ by:
 
     * Marek Vasut <[email protected]>
     * Pavel Herrmann <[email protected]>
-   * Viktor K?iv?k <[email protected]>
+   * Viktor Krivak <[email protected]>
     * Tomas Hlavacek <[email protected]>
 
  This has been both simplified and extended into the current implementation
doc/usage/bootmenu.rst +1 -2
index 1f094ad6ed..44654acced 100644
@@ -1,5 +1,5 @@
  .. SPDX-License-Identifier: GPL-2.0+
-.. (C) Copyright 2011-2012 Pali Roh?r <[email protected]>
+.. (C) Copyright 2011-2012 Pali Rohar <[email protected]>
 
  bootmenu command
  ================
--

2.29.2

#3 lore raw

PATCH 1/1 doc: remove illegal characters

Quoted 8 lines · On Tuesday 26 January 2021 00:33:29 Heinrich Schuchardt wrote:
Quoted 7 lines · Pali Roh?r

Hello Heinrich!

Does this change mean that UTF-8 is now disallowed in U-Boot?

Quoted 2 lines · On Monday 25 January 2021 22:48:56 Heinrich Schuchardt wrote:

Avoid errors when generating the HTML documentation like:

Quoted 8 lines
Quoted 4 lines
Quoted 1 line
     'ascii' codec can't decode byte 0xc2

This sounds like an incorrect configuration of tool which is generating HTML documentation.

Sphinx uses as default:

source_encoding = 'utf-8-sig'

utf-8-sig is IIRC UTF-8 encoding with leading BOM.

Quoted 5 lines

With Sphinx 3 on my machine I have no problem. But with Sphinx 2 on Gitlab an error is ejected for Unicode letters.

I do not know if elder Sphinx versions require a BOM to mark a file as UTF-8 when using utf-8-sig.

According to UNICODE standards, it is not required and moreover it is not recommended to use BOM in UTF-8.

So if some tool requires BOM in UTF-8 then it not compliant to UNICODE standard and I do not think it is a good idea to stop using UNICODE just because some tool cannot process UTF-8... But this is just my opinion and I do not know how Sphinx 2 works or how it is configured.

Maybe... can you check if it is possible to reconfigure Sphinx 2 to use UTF-8 without BOM? Is not there just option source_encoding = 'utf-8' ?

#4 lore raw

PATCH 1/1 doc: remove illegal characters

Quoted 29 lines · Pali Roh?r
Quoted 8 lines · On Tuesday 26 January 2021 00:33:29 Heinrich Schuchardt wrote:
Quoted 7 lines · Pali Roh?r

Hello Heinrich!

Does this change mean that UTF-8 is now disallowed in U-Boot?

Quoted 2 lines · On Monday 25 January 2021 22:48:56 Heinrich Schuchardt wrote:

Avoid errors when generating the HTML documentation like:

Quoted 8 lines
Quoted 4 lines
Quoted 1 line
     'ascii' codec can't decode byte 0xc2

This sounds like an incorrect configuration of tool which is generating HTML documentation.

Sphinx uses as default:

source_encoding = 'utf-8-sig'

utf-8-sig is IIRC UTF-8 encoding with leading BOM.

Quoted 5 lines

With Sphinx 3 on my machine I have no problem. But with Sphinx 2 on Gitlab an error is ejected for Unicode letters.

I do not know if elder Sphinx versions require a BOM to mark a file as UTF-8 when using utf-8-sig.

According to UNICODE standards, it is not required and moreover it is not recommended to use BOM in UTF-8.

Quoted 8 lines

So if some tool requires BOM in UTF-8 then it not compliant to UNICODE standard and I do not think it is a good idea to stop using UNICODE just because some tool cannot process UTF-8... But this is just my opinion and I do not know how Sphinx 2 works or how it is configured.

Maybe... can you check if it is possible to reconfigure Sphinx 2 to use UTF-8 without BOM? Is not there just option source_encoding = 'utf-8' ?

The problem is caused by doc/sphinx/automarkup.py inherited from Linux. The initial commit for the module says:

"Rather than fill our text files with :c:func:function() syntax, just do the markup via a hook into the sphinx build process."

I am not able to reproduce the problem locally.

We can deactivate this module. Anyway the module would have to be adjusted to match U-Boots file structure.

Best regards

Heinrich

#5 lore raw

PATCH 1/1 doc: remove illegal characters

In reply to Heinrich Schuchardt
Quoted 3 lines · Heinrich Schuchardt

Avoid errors when generating the HTML documentation like:

     'ascii' codec can't decode byte 0xc2

Why do we use the ascii codec (instead of e.g. UTF-8)?

--Sean

Quoted 134 lines

Correct capitalization of 'U-Boot'.

---
  doc/board/freescale/b4860qds.rst    |  2 +-
  doc/board/microchip/mpfs_icicle.rst |  4 ++--
  doc/board/sifive/fu540.rst          |  2 +-
  doc/board/xen/xenguest_arm64.rst    | 14 +++++++-------
  doc/driver-model/design.rst         |  2 +-
  doc/usage/bootmenu.rst              |  2 +-
  6 files changed, 13 insertions(+), 13 deletions(-)
doc/board/freescale/b4860qds.rst +1 -1
index de14d857b9..efb1422e1c 100644
@@ -9,7 +9,7 @@ The B4860QDS is a Freescale reference board that hosts the B4860 SoC
  B4860 Overview
  --------------
  The B4860 QorIQ Qonverge device is a Freescale high-end, multicore SoC based on
-StarCore and Power Architecture? cores. It targets the broadband wireless
+StarCore and Power Architecture cores. It targets the broadband wireless
  infrastructure and builds upon the proven success of the existing multicore
  DSPs and Power CPUs. It is designed to bolster the rapidly changing and
  expanding wireless markets, such as 3GLTE (FDD and TDD), LTE-Advanced, and UMTS.
doc/board/microchip/mpfs_icicle.rst +2 -2
index c71c2f3cab..1f9ce13a3c 100644
@@ -702,9 +702,9 @@ Sample boot log from MPFS Icicle Kit
     [    2.756098] systemd[1]: Created slice User and Session Slice.
     [  OK  ] Created slice User and Session Slice.
     [    2.789065] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
-   [  OK  ] Started Dispatch Password ?ts to Console Directory Watch.
+   [  OK  ] Started Dispatch Password ..ts to Console Directory Watch.
     [    2.828974] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
-   [  OK  ] Started Forward Password R?uests to Wall Directory Watch.
+   [  OK  ] Started Forward Password R..uests to Wall Directory Watch.
     [    2.869009] systemd[1]: Reached target Paths.
     [  OK  ] Reached target Paths.
     [    2.898808] systemd[1]: Reached target Remote File Systems.
doc/board/sifive/fu540.rst +1 -1
index 4e4c852ff3..c8091f6490 100644
@@ -5,7 +5,7 @@ HiFive Unleashed
 
  FU540-C000 RISC-V SoC
  ---------------------
-The FU540-C000 is the world?s first 4+1 64-bit RISC-V SoC from SiFive.
+The FU540-C000 is the world's first 4+1 64-bit RISC-V SoC from SiFive.
 
  The HiFive Unleashed development platform is based on FU540-C000 and capable
  of running Linux.
doc/board/xen/xenguest_arm64.rst +7 -7
index 1327f88f99..31a5c23dfd 100644
@@ -6,17 +6,17 @@ Xen guest ARM64 board
  This board specification
  ------------------------
 
-This board is to be run as a virtual Xen [1] guest with U-boot as its primary
+This board is to be run as a virtual Xen [1] guest with U-Boot as its primary
  bootloader. Xen is a type 1 hypervisor that allows multiple operating systems
  to run simultaneously on a single physical server. Xen is capable of running
  virtual machines in both full virtualization and para-virtualization (PV)
-modes. Xen runs virtual machines, which are called ?domains?.
+modes. Xen runs virtual machines, which are called "domains".
 
  Paravirtualized drivers are a special type of device drivers that are used in
  a guest system in the Xen domain and perform I/O operations using a special
  interface provided by the virtualization system and the host system.
 
-Xen support for U-boot is implemented by introducing a new Xen guest ARM64
+Xen support for U-Boot is implemented by introducing a new Xen guest ARM64
  board and porting essential drivers from MiniOS [3] as well as some of the work
  previously done by NXP [4]:
 
@@ -39,7 +39,7 @@ previously done by NXP [4]:
  Board limitations
  -----------------
 
-1. U-boot runs without MMU enabled at the early stages.
+1. U-Boot runs without MMU enabled at the early stages.
     According to Xen on ARM ABI (xen/include/public/arch-arm.h): all memory
     which is shared with other entities in the system (including the hypervisor
     and other guests) must reside in memory which is mapped as Normal Inner
@@ -54,14 +54,14 @@ Board limitations
  2. No serial console until MMU is up.
     Because data cache maintenance is required until the MMU setup the
     early/debug serial console is not implemented. Therefore, we do not have
-   usual prints like U-boot?s banner etc. until the serial driver is
+   usual prints like U-Boot's banner etc. until the serial driver is
     initialized.
 
  3. Single RAM bank supported.
     If a Xen guest is given much memory it is possible that Xen allocates two
     memory banks for it. The first one is allocated under 4GB address space and
-   in some cases may represent the whole guest?s memory. It is assumed that
-   U-boot most likely won?t require high memory bank for its work andlaunching
+   in some cases may represent the whole guest's memory. It is assumed that
+   U-Boot most likely won't require high memory bank for its work andlaunching
     OS, so it is enough to take the first one.
 
 
doc/driver-model/design.rst +1 -1
index ffed7d5f79..93a9f3dc41 100644
@@ -10,7 +10,7 @@ by:
 
     * Marek Vasut <[email protected]>
     * Pavel Herrmann <[email protected]>
-   * Viktor K?iv?k <[email protected]>
+   * Viktor Krivak <[email protected]>
     * Tomas Hlavacek <[email protected]>
 
  This has been both simplified and extended into the current implementation
doc/usage/bootmenu.rst +1 -2
index 1f094ad6ed..44654acced 100644
@@ -1,5 +1,5 @@
  .. SPDX-License-Identifier: GPL-2.0+
-.. (C) Copyright 2011-2012 Pali Roh?r <[email protected]>
+.. (C) Copyright 2011-2012 Pali Rohar <[email protected]>
 
  bootmenu command
  ================
--

2.29.2