arm: mvebu: Espressobin: Set the maximum slave SPI speed to 40MHz
PATCH 1/1 arm: mvebu: Espressobin: Set the maximum slave SPI speed to 40MHz
From: Konstantin Porotchkin <[email protected]>
While the SPI controller speed is defined by DTS, the maximum slave speed (connected devices) is limited by the pre-defined configuration value CONFIG_SF_DEFAULT_SPEED to 1MHz This patch increases this maximum SPI slave device speed to 40MHz
Reviewed-on: http://vgitil04.il.marvell.com:8080/59516
--- configs/mvebu_espressobin-88f3720_defconfig | 1 + 1 file changed, 1 insertion(+)
configs/mvebu_espressobin-88f3720_defconfig +1 -0
@@ -54,6 +54,7 @@ CONFIG_MMC_SDHCI_SDMA=y CONFIG_MMC_SDHCI_XENON=y CONFIG_MTD=y CONFIG_SF_DEFAULT_MODE=0 +CONFIG_SF_DEFAULT_SPEED=40000000 CONFIG_SPI_FLASH_GIGADEVICE=y CONFIG_SPI_FLASH_ISSI=y CONFIG_SPI_FLASH_MACRONIX=y
Signature · 1 line
2.20.1
PATCH 1/1 arm: mvebu: Espressobin: Set the maximum slave SPI speed to 40MHz
Quoted 7 lines · Pali Roh?r
From: Konstantin Porotchkin <[email protected]>
While the SPI controller speed is defined by DTS, the maximum slave speed (connected devices) is limited by the pre-defined configuration value
CONFIG_SF_DEFAULT_SPEEDto 1MHz This patch increases this maximum SPI slave device speed to 40MHz
Quoted 7 lines
Change-Id I0d1239bd8a2061c66725c2c227c1e1f49c92c29eSigned-off-by Konstantin Porotchkin <[email protected]>Reviewed-on: http://vgitil04.il.marvell.com:8080/59516
Tested-by iSoC Platform CI <[email protected]>Reviewed-by Igal Liberman <[email protected]>[pali: Set CONFIG_SF_DEFAULT_SPEED via defconfig]Signed-off-by Pali Roh?r <[email protected]>
Thanks,
Stefan
Quoted 10 lines
--- configs/mvebu_espressobin-88f3720_defconfig | 1 + 1 file changed, 1 insertion(+)configs/mvebu_espressobin-88f3720_defconfig +0
-0
configs/mvebu_espressobin-88f3720_defconfig CONFIG_MMC_SDHCI_SDMA=y · line 60
Quoted 7 lines
configs/mvebu_espressobin-88f3720_defconfig +1
-0@@ -54,6 +54,7 @@ CONFIG_MMC_SDHCI_SDMA=y CONFIG_MMC_SDHCI_XENON=y CONFIG_MTD=y CONFIG_SF_DEFAULT_MODE=0 +CONFIG_SF_DEFAULT_SPEED=40000000 CONFIG_SPI_FLASH_GIGADEVICE=y CONFIG_SPI_FLASH_ISSI=y CONFIG_SPI_FLASH_MACRONIX=y
Viele Gr??e,
Stefan
Signature · 3 lines
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: sr at denx.de
PATCH 1/1 arm: mvebu: Espressobin: Set the maximum slave SPI speed to 40MHz
In reply to Pali RohárQuoted 7 lines · Pali Roh?r
From: Konstantin Porotchkin <[email protected]>
While the SPI controller speed is defined by DTS, the maximum slave speed (connected devices) is limited by the pre-defined configuration value
CONFIG_SF_DEFAULT_SPEEDto 1MHz This patch increases this maximum SPI slave device speed to 40MHz
Quoted 7 lines
Change-Id I0d1239bd8a2061c66725c2c227c1e1f49c92c29eSigned-off-by Konstantin Porotchkin <[email protected]>Reviewed-on: http://vgitil04.il.marvell.com:8080/59516
Tested-by iSoC Platform CI <[email protected]>Reviewed-by Igal Liberman <[email protected]>[pali: Set CONFIG_SF_DEFAULT_SPEED via defconfig]Signed-off-by Pali Roh?r <[email protected]>
Applied to u-boot-marvell/master
Thanks,
Stefan