ARM: dts: aspeed: amd-ethanolx: Enable secondary LPC snooping address
Subsystems (2)
PATCH 1/1 ARM: dts: aspeed: amd-ethanolx: Enable secondary LPC snooping address
AMD EthanolX CRB uses 2-byte POST codes which are sent to ports 0x80/0x81. Currently ASPEED controller snoops only 0x80 port and therefore captures only the lower byte of each POST code.
Enable secondary LPC snooping address to capture the higher byte of POST codes.
Signed-off-by Konstantin Aladyshev <[email protected]>
--- arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dts +1 -1
@@ -218,7 +218,7 @@ &lpc_snoop { status = "okay"; - snoop-ports = <0x80>; + snoop-ports = <0x80>, <0x81>; }; &lpc_ctrl {
Signature · 1 line
2.17.1
Quoted 7 lines · Konstantin Aladyshev
AMD EthanolX CRB uses 2-byte POST codes which are sent to ports 0x80/0x81. Currently ASPEED controller snoops only
0x80port and therefore captures only the lower byte of each POST code.
Enable secondary LPC snooping address to capture the higher byte of POST codes.Signed-off-by Konstantin Aladyshev <[email protected]>
Reviewed-by Andrew Jeffery <[email protected]>