Skip to contentSkip to conversation

Control-flow Enforcement: Shadow Stack

PATCH Superseded Yu-cheng Yu 4 participants 49 messages Jan 27, 2021 – Feb 3, 2021

Subsystems (19)

v18 of 30 Superseded Latest is v30 →

lore
Share & tools
lore
#0 lore raw

v18 cover Control-flow Enforcement: Shadow Stack

Control-flow Enforcement (CET) is a new Intel processor feature that blocks return/jump-oriented programming attacks. Details are in "Intel 64 and IA-32 Architectures Software Developer's Manual" [1].

CET can protect applications and the kernel. This series enables only application-level protection, and has three parts:

- Shadow stack [2],
- Indirect branch tracking [3], and
- Selftests [4].

I have run tests on these patches for quite some time, and they have been very stable. Linux distributions with CET are available now, and Intel processors with CET are already on the market. It would be nice if CET support can be accepted into the kernel. I will be working to address any issues should they come up.

Changes in v18:
- Patch #2: change X86_CET_USER to X86_CET
- Patch #4: move setting of X86_FEATURE_CET from get_cpu_cap() to bsp_init_intel().
- Patch #6: change printk_ratelimit() to __ratelimit(), pr_info() to pr_emerg(), and do panic() for kernel-mode control protection fault.
- patch #8: make p*_wrprotect() more readable by using p*_set_flags()/ p*_clear_flags() directly.
- patch #11: move reading old_pte out of while() loop. Update comments.
- patch #22: merge GNU_PROPERTY_* definitions and arch_setup_elf_property() into one patch.
- Rebase to v5.11-rc5

[1] Intel 64 and IA-32 Architectures Software Developer's Manual:

    https://software.intel.com/en-us/download/intel-64-and-ia-32-
    architectures-sdm-combined-volumes-1-2a-2b-2c-2d-3a-3b-3c-3d-and-4

[2] CET Shadow Stack patches v17:

    https://lkml.kernel.org/r/[email protected]/

[3] Indirect Branch Tracking patches v17.

    https://lkml.kernel.org/r/[email protected]/

[4] I am holding off the selftests changes and working to get Reviewed-by's. The earlier version of the selftests patches:

https://lkml.kernel.org/r/[email protected]/

[5] The kernel ptrace patch is tested with an Intel-internal updated GDB. I am holding off the kernel ptrace patch to re-test it with my earlier patch for fixing regset holes.

Yu-cheng Yu (25):
Documentation/x86: Add CET description
x86/cet/shstk: Add Kconfig option for user-mode control-flow
protection
x86/cpufeatures: Add CET CPU feature flags for Control-flow
Enforcement Technology (CET)
x86/cpufeatures: Introduce X86_FEATURE_CET and setup functions x86/fpu/xstate: Introduce CET MSR and XSAVES supervisor states x86/cet: Add control-protection fault handler
x86/mm: Remove _PAGE_DIRTY from kernel RO pages x86/mm: Introduce _PAGE_COW
drm/i915/gvt: Change _PAGE_DIRTY to _PAGE_DIRTY_BITS x86/mm: Update pte_modify for _PAGE_COW
x86/mm: Update ptep_set_wrprotect() and pmdp_set_wrprotect() for
transition from _PAGE_DIRTY to _PAGE_COW
mm: Introduce VM_SHSTK for shadow stack memory x86/mm: Shadow Stack page fault error checking x86/mm: Update maybe_mkwrite() for shadow stack
mm: Fixup places that call pte_mkwrite() directly
mm: Add guard pages around a shadow stack.
mm/mmap: Add shadow stack pages to memory accounting
mm: Update can_follow_write_pte() for shadow stack
mm: Re-introduce vm_flags to do_mmap()
x86/cet/shstk: User-mode shadow stack support x86/cet/shstk: Handle signals for shadow stack
ELF: Introduce arch_setup_elf_property() x86/cet/shstk: Handle thread shadow stack x86/cet/shstk: Add arch_prctl functions for shadow stack
mm: Introduce PROT_SHSTK for shadow stack

 .../admin-guide/kernel-parameters.txt         |   6 +
 Documentation/x86/index.rst                   |   1 +
 Documentation/x86/intel_cet.rst               | 136 +++++++
 arch/arm64/include/asm/elf.h                  |   5 +
 arch/x86/Kconfig                              |  28 ++
 arch/x86/Kconfig.assembler                    |   5 +
 arch/x86/ia32/ia32_signal.c                   |  17 +
 arch/x86/include/asm/cet.h                    |  42 +++
 arch/x86/include/asm/cpufeatures.h            |   4 +-
 arch/x86/include/asm/disabled-features.h      |  17 +-
 arch/x86/include/asm/elf.h                    |  13 +
 arch/x86/include/asm/fpu/internal.h           |  10 +
 arch/x86/include/asm/fpu/types.h              |  23 +-
 arch/x86/include/asm/fpu/xstate.h             |   6 +-
 arch/x86/include/asm/idtentry.h               |   4 +
 arch/x86/include/asm/mman.h                   |  85 +++++
 arch/x86/include/asm/mmu_context.h            |   3 +
 arch/x86/include/asm/msr-index.h              |  19 +
 arch/x86/include/asm/page_64_types.h          |  10 +
 arch/x86/include/asm/pgtable.h                | 194 +++++++++-
 arch/x86/include/asm/pgtable_types.h          |  48 ++-
 arch/x86/include/asm/processor.h              |   5 +
 arch/x86/include/asm/special_insns.h          |  32 ++
 arch/x86/include/asm/trap_pf.h                |   2 +
 arch/x86/include/uapi/asm/mman.h              |  28 +-
 arch/x86/include/uapi/asm/prctl.h             |   4 +
 arch/x86/include/uapi/asm/processor-flags.h   |   2 +
 arch/x86/include/uapi/asm/sigcontext.h        |   9 +
 arch/x86/kernel/Makefile                      |   2 +
 arch/x86/kernel/cet.c                         | 343 ++++++++++++++++++
 arch/x86/kernel/cet_prctl.c                   |  68 ++++
 arch/x86/kernel/cpu/common.c                  |  16 +
 arch/x86/kernel/cpu/cpuid-deps.c              |   2 +
 arch/x86/kernel/cpu/intel.c                   |   3 +
 arch/x86/kernel/fpu/signal.c                  | 100 +++++
 arch/x86/kernel/fpu/xstate.c                  |  10 +-
 arch/x86/kernel/idt.c                         |   4 +
 arch/x86/kernel/process.c                     |  14 +-
 arch/x86/kernel/process_64.c                  |  32 ++
 arch/x86/kernel/signal.c                      |  10 +
 arch/x86/kernel/signal_compat.c               |   2 +-
 arch/x86/kernel/traps.c                       |  60 +++
 arch/x86/mm/fault.c                           |  19 +
 arch/x86/mm/mmap.c                            |   2 +
 arch/x86/mm/pat/set_memory.c                  |   2 +-
 arch/x86/mm/pgtable.c                         |  25 ++
 drivers/gpu/drm/i915/gvt/gtt.c                |   2 +-
 fs/aio.c                                      |   2 +-
 fs/binfmt_elf.c                               |   4 +
 fs/proc/task_mmu.c                            |   3 +
 include/linux/elf.h                           |   6 +
 include/linux/mm.h                            |  38 +-
 include/linux/pgtable.h                       |  35 ++
 include/uapi/asm-generic/siginfo.h            |   3 +-
 include/uapi/linux/elf.h                      |   9 +
 ipc/shm.c                                     |   2 +-
 mm/gup.c                                      |   8 +-
 mm/huge_memory.c                              |  10 +-
 mm/memory.c                                   |   5 +-
 mm/migrate.c                                  |   3 +-
 mm/mmap.c                                     |  23 +-
 mm/mprotect.c                                 |   2 +-
 mm/nommu.c                                    |   4 +-
 mm/util.c                                     |   2 +-
 64 files changed, 1549 insertions(+), 84 deletions(-)
 create mode 100644 Documentation/x86/intel_cet.rst
 create mode 100644 arch/x86/include/asm/cet.h
 create mode 100644 arch/x86/include/asm/mman.h
 create mode 100644 arch/x86/kernel/cet.c
 create mode 100644 arch/x86/kernel/cet_prctl.c
Signature · 1 line
2.21.0
#1 lore raw

PATCH v18 1/25 Documentation/x86: Add CET description

Explain no_user_shstk/no_user_ibt kernel parameters, and introduce a new document on Control-flow Enforcement Technology (CET).

---
 .../admin-guide/kernel-parameters.txt         |   6 +
 Documentation/x86/index.rst                   |   1 +
 Documentation/x86/intel_cet.rst               | 136 ++++++++++++++++++
 3 files changed, 143 insertions(+)
 create mode 100644 Documentation/x86/intel_cet.rst
Documentation/admin-guide/kernel-parameters.txt +6 -0
index a10b545c2070..96f65530768c 100644
@@ -3202,6 +3202,12 @@
 			noexec=on: enable non-executable mappings (default)
 			noexec=off: disable non-executable mappings
 
+	no_user_shstk	[X86-64] Disable Shadow Stack for user-mode
+			applications
+
+	no_user_ibt	[X86-64] Disable Indirect Branch Tracking for user-mode
+			applications
+
 	nosmap		[X86,PPC]
 			Disable SMAP (Supervisor Mode Access Prevention)
 			even if it is supported by processor.
Documentation/x86/index.rst +1 -0
index 4693e192b447..cf5250a3cc70 100644
@@ -21,6 +21,7 @@ x86-specific Documentation
    tlb
    mtrr
    pat
+   intel_cet
    intel-iommu
    intel_txt
    amd-memory-encryption
Documentation/x86/intel_cet.rst new file +136 -0

136 lines not on this page · raw message

Signature · 1 line
2.21.0
#2 lore raw

PATCH v18 2/25 x86/cet/shstk: Add Kconfig option for user-mode control-flow protection

In reply to Yu-cheng Yu

Shadow Stack provides protection against function return address corruption. It is active when the processor supports it, the kernel has CONFIG_X86_CET enabled, and the application is built for the feature. This is only implemented for the 64-bit kernel. When it is enabled, legacy non-Shadow Stack applications continue to work, but without protection.

---
 arch/x86/Kconfig           | 22 ++++++++++++++++++++++
 arch/x86/Kconfig.assembler |  5 +++++
 2 files changed, 27 insertions(+)
arch/x86/Kconfig +22 -0
index 21f851179ff0..2d080a2335df 100644
@@ -1951,6 +1951,28 @@ config X86_SGX
 
 	  If unsure, say N.
 
+config ARCH_HAS_SHADOW_STACK
+	def_bool n
+
+config X86_CET
+	prompt "Intel Control-flow protection for user-mode"
+	def_bool n
+	depends on CPU_SUP_INTEL && X86_64
+	depends on AS_WRUSS
+	select ARCH_USES_HIGH_VMA_FLAGS
+	select ARCH_HAS_SHADOW_STACK
+	help
+	  Control-flow protection is a hardware security hardening feature
+	  that detects function-return address or jump target changes by
+	  malicious code.  Applications must be enabled to use it, and old
+	  userspace does not get protection "for free".
+	  Support for this feature is present on processors released in
+	  2020 or later.  Enabling this feature increases kernel text size
+	  by 3.7 KB.
+	  See Documentation/x86/intel_cet.rst for more information.
+
+	  If unsure, say N.
+
 config EFI
 	bool "EFI runtime service support"
 	depends on ACPI
arch/x86/Kconfig.assembler +5 -0
index 26b8c08e2fc4..00c79dd93651 100644
@@ -19,3 +19,8 @@ config AS_TPAUSE
 	def_bool $(as-instr,tpause %ecx)
 	help
 	  Supported by binutils >= 2.31.1 and LLVM integrated assembler >= V7
+
+config AS_WRUSS
+	def_bool $(as-instr,wrussq %rax$(comma)(%rbx))
+	help
+	  Supported by binutils >= 2.31 and LLVM integrated assembler
Signature · 1 line
2.21.0
#3 lore raw

Re: [PATCH v18 02/25] x86/cet/shstk: Add Kconfig option for user-mode control-flow protection

arch/x86/Kconfig config X86_SGX

Quoted 4 lines · Yu-cheng Yu
arch/x86/Kconfig +4 -0
+	help
+	  Control-flow protection is a hardware security hardening feature
+	  that detects function-return address or jump target changes by
+	  malicious code.

It's not really one feature. I also think it's not worth talking about shadow stacks or indirect branch tracking in *here*. Leave that for Documentation/.

Just say:

Control-flow protection is a set of hardware features which place additional restrictions on indirect branches. These help mitigate ROP attacks.

... and add more in the IBT patches.

arch/x86/Kconfig config X86_SGX · line 1971

Quoted 5 lines

Applications must be enabled to use it, and old

arch/x86/Kconfig +4 -0
+	  userspace does not get protection "for free".
+	  Support for this feature is present on processors released in
+	  2020 or later.  Enabling this feature increases kernel text size
+	  by 3.7 KB.

Did any CPUs ever get released that have this? If so, name them. If not, time to change this to 2021, I think.

#4 lore raw

Re: [PATCH v18 02/25] x86/cet/shstk: Add Kconfig option for user-mode control-flow protection

Quoted 22 lines · Dave Hansen

arch/x86/Kconfig config X86_SGX

Quoted 4 lines · Yu-cheng Yu
arch/x86/Kconfig +4 -0
+    help
+      Control-flow protection is a hardware security hardening feature
+      that detects function-return address or jump target changes by
+      malicious code.

It's not really one feature. I also think it's not worth talking about shadow stacks or indirect branch tracking in *here*. Leave that for Documentation/.

Just say:

Control-flow protection is a set of hardware features which place additional restrictions on indirect branches. These help mitigate ROP attacks.

... and add more in the IBT patches.

Quoted 8 lines

arch/x86/Kconfig config X86_SGX · line 1971

Quoted 5 lines

Applications must be enabled to use it, and old

arch/x86/Kconfig +4 -0
+      userspace does not get protection "for free".
+      Support for this feature is present on processors released in
+      2020 or later.  Enabling this feature increases kernel text size
+      by 3.7 KB.

Did any CPUs ever get released that have this? If so, name them. If not, time to change this to 2021, I think.

Zen 3 :)

#5 lore raw

Re: [PATCH v18 02/25] x86/cet/shstk: Add Kconfig option for user-mode control-flow protection

Quoted 3 lines · Andy Lutomirski
Quoted 2 lines

Did any CPUs ever get released that have this? If so, name them. If not, time to change this to 2021, I think.

Zen 3 :)

In that case is there any reason to keep the "depends on CPU_SUP_INTEL"?

maintainer
#6 lore raw

Re: [PATCH v18 02/25] x86/cet/shstk: Add Kconfig option for user-mode control-flow protection

Quoted 1 line · Dave Hansen

In that case is there any reason to keep the "depends on CPU_SUP_INTEL"?

Probably not. I haven't heard of the AMD implementation being somehow different from Intel's.

Signature · 4 lines
Regards/Gruss,
    Boris.

https://people.kernel.org/tglx/notes-about-netiquette
#7 lore raw

Re: [PATCH v18 02/25] x86/cet/shstk: Add Kconfig option for user-mode control-flow protection

Quoted 6 lines · Borislav Petkov
Quoted 1 line · Dave Hansen

In that case is there any reason to keep the "depends on CPU_SUP_INTEL"?

Probably not. I haven't heard of the AMD implementation being somehow different from Intel's.

Ok, I will remove it.

#8 lore raw

Re: [PATCH v18 02/25] x86/cet/shstk: Add Kconfig option for user-mode control-flow protection

In reply to Dave Hansen
Quoted 18 lines · Dave Hansen

arch/x86/Kconfig config X86_SGX

Quoted 4 lines · Yu-cheng Yu
arch/x86/Kconfig +4 -0
+	help
+	  Control-flow protection is a hardware security hardening feature
+	  that detects function-return address or jump target changes by
+	  malicious code.

It's not really one feature. I also think it's not worth talking about shadow stacks or indirect branch tracking in *here*. Leave that for Documentation/.

Just say:

Control-flow protection is a set of hardware features which place additional restrictions on indirect branches. These help mitigate ROP attacks.

... and add more in the IBT patches.

Quoted 9 lines

arch/x86/Kconfig config X86_SGX · line 1971

Quoted 5 lines

Applications must be enabled to use it, and old

arch/x86/Kconfig +4 -0
+	  userspace does not get protection "for free".
+	  Support for this feature is present on processors released in
+	  2020 or later.  Enabling this feature increases kernel text size
+	  by 3.7 KB.

Did any CPUs ever get released that have this? If so, name them. If not, time to change this to 2021, I think.

Ok. I will update this.

Yu-cheng

#9 lore raw

PATCH v18 3/25 x86/cpufeatures: Add CET CPU feature flags for Control-flow Enforcement Technology (CET)

In reply to Yu-cheng Yu

Add CPU feature flags for Control-flow Enforcement Technology (CET).

CPUID.(EAX=7,ECX=0):ECX[bit 7] Shadow stack CPUID.(EAX=7,ECX=0):EDX[bit 20] Indirect Branch Tracking

---
 arch/x86/include/asm/cpufeatures.h       |  2 ++
 arch/x86/include/asm/disabled-features.h | 12 ++++++++++--
 arch/x86/kernel/cpu/cpuid-deps.c         |  2 ++
 3 files changed, 14 insertions(+), 2 deletions(-)
arch/x86/include/asm/cpufeatures.h +2 -0
index 84b887825f12..292fe87b26b3 100644
@@ -345,6 +345,7 @@
 #define X86_FEATURE_OSPKE		(16*32+ 4) /* OS Protection Keys Enable */
 #define X86_FEATURE_WAITPKG		(16*32+ 5) /* UMONITOR/UMWAIT/TPAUSE Instructions */
 #define X86_FEATURE_AVX512_VBMI2	(16*32+ 6) /* Additional AVX512 Vector Bit Manipulation Instructions */
+#define X86_FEATURE_SHSTK		(16*32+ 7) /* Shadow Stack */
 #define X86_FEATURE_GFNI		(16*32+ 8) /* Galois Field New Instructions */
 #define X86_FEATURE_VAES		(16*32+ 9) /* Vector AES */
 #define X86_FEATURE_VPCLMULQDQ		(16*32+10) /* Carry-Less Multiplication Double Quadword */
@@ -377,6 +378,7 @@
 #define X86_FEATURE_TSXLDTRK		(18*32+16) /* TSX Suspend Load Address Tracking */
 #define X86_FEATURE_PCONFIG		(18*32+18) /* Intel PCONFIG */
 #define X86_FEATURE_ARCH_LBR		(18*32+19) /* Intel ARCH LBR */
+#define X86_FEATURE_IBT			(18*32+20) /* Indirect Branch Tracking */
 #define X86_FEATURE_AVX512_FP16		(18*32+23) /* AVX512 FP16 */
 #define X86_FEATURE_SPEC_CTRL		(18*32+26) /* "" Speculation Control (IBRS + IBPB) */
 #define X86_FEATURE_INTEL_STIBP		(18*32+27) /* "" Single Thread Indirect Branch Predictors */
arch/x86/include/asm/disabled-features.h +10 -2
index 7947cb1782da..a66e7f34b788 100644
@@ -68,6 +68,14 @@
 # define DISABLE_SGX	(1 << (X86_FEATURE_SGX & 31))
 #endif
 
+#ifdef CONFIG_X86_CET
+#define DISABLE_SHSTK	0
+#define DISABLE_IBT	0
+#else
+#define DISABLE_SHSTK	(1 << (X86_FEATURE_SHSTK & 31))
+#define DISABLE_IBT	(1 << (X86_FEATURE_IBT & 31))
+#endif
+
 /*
  * Make sure to add features to the correct mask
  */
@@ -88,9 +96,9 @@
 #define DISABLED_MASK14	0
 #define DISABLED_MASK15	0
 #define DISABLED_MASK16	(DISABLE_PKU|DISABLE_OSPKE|DISABLE_LA57|DISABLE_UMIP| \
-			 DISABLE_ENQCMD)
+			 DISABLE_ENQCMD|DISABLE_SHSTK)
 #define DISABLED_MASK17	0
-#define DISABLED_MASK18	0
+#define DISABLED_MASK18	(DISABLE_IBT)
 #define DISABLED_MASK_CHECK BUILD_BUG_ON_ZERO(NCAPINTS != 19)
 
 #endif /* _ASM_X86_DISABLED_FEATURES_H */
arch/x86/kernel/cpu/cpuid-deps.c +2 -0
index 42af31b64c2c..52d9a682a0e6 100644
@@ -72,6 +72,8 @@ static const struct cpuid_dep cpuid_deps[] = {
 	{ X86_FEATURE_AVX512_FP16,		X86_FEATURE_AVX512BW  },
 	{ X86_FEATURE_ENQCMD,			X86_FEATURE_XSAVES    },
 	{ X86_FEATURE_PER_THREAD_MBA,		X86_FEATURE_MBA       },
+	{ X86_FEATURE_SHSTK,			X86_FEATURE_XSAVES    },
+	{ X86_FEATURE_IBT,			X86_FEATURE_XSAVES    },
 	{}
 };
 
Signature · 1 line
2.21.0
#10 lore raw

PATCH v18 4/25 x86/cpufeatures: Introduce X86_FEATURE_CET and setup functions

In reply to Yu-cheng Yu

Introduce a software-defined X86_FEATURE_CET, which indicates either Shadow Stack or Indirect Branch Tracking (or both) is present. Also introduce related cpu init/setup functions.

---
 arch/x86/include/asm/cpufeatures.h          |  2 +-
 arch/x86/include/asm/disabled-features.h    |  5 ++++-
 arch/x86/include/uapi/asm/processor-flags.h |  2 ++
 arch/x86/kernel/cpu/common.c                | 16 ++++++++++++++++
 arch/x86/kernel/cpu/intel.c                 |  3 +++
 5 files changed, 26 insertions(+), 2 deletions(-)
arch/x86/include/asm/cpufeatures.h +1 -1
index 292fe87b26b3..d1866659edbd 100644
@@ -108,7 +108,7 @@
 #define X86_FEATURE_EXTD_APICID		( 3*32+26) /* Extended APICID (8 bits) */
 #define X86_FEATURE_AMD_DCM		( 3*32+27) /* AMD multi-node processor */
 #define X86_FEATURE_APERFMPERF		( 3*32+28) /* P-State hardware coordination feedback capability (APERF/MPERF MSRs) */
-/* free					( 3*32+29) */
+#define X86_FEATURE_CET			( 3*32+29) /* Control-flow enforcement */
 #define X86_FEATURE_NONSTOP_TSC_S3	( 3*32+30) /* TSC doesn't stop in S3 state */
 #define X86_FEATURE_TSC_KNOWN_FREQ	( 3*32+31) /* TSC has known frequency */
 
arch/x86/include/asm/disabled-features.h +4 -1
index a66e7f34b788..ab28dc7b30d0 100644
@@ -71,9 +71,11 @@
 #ifdef CONFIG_X86_CET
 #define DISABLE_SHSTK	0
 #define DISABLE_IBT	0
+#define DISABLE_CET	0
 #else
 #define DISABLE_SHSTK	(1 << (X86_FEATURE_SHSTK & 31))
 #define DISABLE_IBT	(1 << (X86_FEATURE_IBT & 31))
+#define DISABLE_CET	(1 << (X86_FEATURE_CET & 31))
 #endif
 
 /*
@@ -82,7 +84,8 @@
 #define DISABLED_MASK0	(DISABLE_VME)
 #define DISABLED_MASK1	0
 #define DISABLED_MASK2	0
-#define DISABLED_MASK3	(DISABLE_CYRIX_ARR|DISABLE_CENTAUR_MCR|DISABLE_K6_MTRR)
+#define DISABLED_MASK3	(DISABLE_CYRIX_ARR|DISABLE_CENTAUR_MCR|DISABLE_K6_MTRR| \
+			 DISABLE_CET)
 #define DISABLED_MASK4	(DISABLE_PCID)
 #define DISABLED_MASK5	0
 #define DISABLED_MASK6	0
arch/x86/include/uapi/asm/processor-flags.h +2 -0
index bcba3c643e63..a8df907e8017 100644
@@ -130,6 +130,8 @@
 #define X86_CR4_SMAP		_BITUL(X86_CR4_SMAP_BIT)
 #define X86_CR4_PKE_BIT		22 /* enable Protection Keys support */
 #define X86_CR4_PKE		_BITUL(X86_CR4_PKE_BIT)
+#define X86_CR4_CET_BIT		23 /* enable Control-flow Enforcement */
+#define X86_CR4_CET		_BITUL(X86_CR4_CET_BIT)
 
 /*
  * x86-64 Task Priority Register, CR8
arch/x86/kernel/cpu/common.c +16 -0
index 35ad8480c464..803d0749b302 100644
@@ -510,6 +510,14 @@ static __init int setup_disable_pku(char *arg)
 __setup("nopku", setup_disable_pku);
 #endif /* CONFIG_X86_64 */
 
+static __always_inline void setup_cet(struct cpuinfo_x86 *c)
+{
+	if (!cpu_feature_enabled(X86_FEATURE_CET))
+		return;
+
+	cr4_set_bits(X86_CR4_CET);
+}
+
 /*
  * Some CPU features depend on higher CPUID levels, which may not always
  * be available due to CPUID level capping or broken virtualization
@@ -1252,6 +1260,13 @@ static void __init cpu_parse_early_param(void)
 	if (cmdline_find_option_bool(boot_command_line, "noxsaves"))
 		setup_clear_cpu_cap(X86_FEATURE_XSAVES);
 
+#ifdef CONFIG_X86_CET
+	if (cmdline_find_option_bool(boot_command_line, "no_user_shstk"))
+		setup_clear_cpu_cap(X86_FEATURE_SHSTK);
+	if (cmdline_find_option_bool(boot_command_line, "no_user_ibt"))
+		setup_clear_cpu_cap(X86_FEATURE_IBT);
+#endif
+
 	arglen = cmdline_find_option(boot_command_line, "clearcpuid", arg, sizeof(arg));
 	if (arglen <= 0)
 		return;
@@ -1591,6 +1606,7 @@ static void identify_cpu(struct cpuinfo_x86 *c)
 
 	x86_init_rdrand(c);
 	setup_pku(c);
+	setup_cet(c);
 
 	/*
 	 * Clear/Set all flags overridden by options, need do it
arch/x86/kernel/cpu/intel.c +3 -0
index 59a1e3ce3f14..1784b9f95239 100644
@@ -333,6 +333,9 @@ static void early_init_intel(struct cpuinfo_x86 *c)
 
 static void bsp_init_intel(struct cpuinfo_x86 *c)
 {
+	if (cpu_has(c, X86_FEATURE_SHSTK) || cpu_has(c, X86_FEATURE_IBT))
+		setup_force_cpu_cap(X86_FEATURE_CET);
+
 	resctrl_cpu_detect(c);
 }
 
Signature · 1 line
2.21.0
#11 lore raw

PATCH v18 5/25 x86/fpu/xstate: Introduce CET MSR and XSAVES supervisor states

In reply to Yu-cheng Yu

Control-flow Enforcement Technology (CET) introduces these MSRs:

MSR_IA32_U_CET (user-mode CET settings), MSR_IA32_PL3_SSP (user-mode shadow stack pointer),

MSR_IA32_PL0_SSP (kernel-mode shadow stack pointer), MSR_IA32_PL1_SSP (Privilege Level 1 shadow stack pointer), MSR_IA32_PL2_SSP (Privilege Level 2 shadow stack pointer), MSR_IA32_S_CET (kernel-mode CET settings), MSR_IA32_INT_SSP_TAB (exception shadow stack table).

The two user-mode MSRs belong to XFEATURE_CET_USER. The first three of kernel-mode MSRs belong to XFEATURE_CET_KERNEL. Both XSAVES states are supervisor states.

---
 arch/x86/include/asm/fpu/types.h  | 23 +++++++++++++++++++++--
 arch/x86/include/asm/fpu/xstate.h |  6 ++++--
 arch/x86/include/asm/msr-index.h  | 19 +++++++++++++++++++
 arch/x86/kernel/fpu/xstate.c      | 10 +++++++++-
 4 files changed, 53 insertions(+), 5 deletions(-)
arch/x86/include/asm/fpu/types.h +21 -2
index f5a38a5f3ae1..035eb0ec665e 100644
@@ -115,8 +115,8 @@ enum xfeature {
 	XFEATURE_PT_UNIMPLEMENTED_SO_FAR,
 	XFEATURE_PKRU,
 	XFEATURE_PASID,
-	XFEATURE_RSRVD_COMP_11,
-	XFEATURE_RSRVD_COMP_12,
+	XFEATURE_CET_USER,
+	XFEATURE_CET_KERNEL,
 	XFEATURE_RSRVD_COMP_13,
 	XFEATURE_RSRVD_COMP_14,
 	XFEATURE_LBR,
@@ -135,6 +135,8 @@ enum xfeature {
 #define XFEATURE_MASK_PT		(1 << XFEATURE_PT_UNIMPLEMENTED_SO_FAR)
 #define XFEATURE_MASK_PKRU		(1 << XFEATURE_PKRU)
 #define XFEATURE_MASK_PASID		(1 << XFEATURE_PASID)
+#define XFEATURE_MASK_CET_USER		(1 << XFEATURE_CET_USER)
+#define XFEATURE_MASK_CET_KERNEL	(1 << XFEATURE_CET_KERNEL)
 #define XFEATURE_MASK_LBR		(1 << XFEATURE_LBR)
 
 #define XFEATURE_MASK_FPSSE		(XFEATURE_MASK_FP | XFEATURE_MASK_SSE)
@@ -237,6 +239,23 @@ struct pkru_state {
 	u32				pad;
 } __packed;
 
+/*
+ * State component 11 is Control-flow Enforcement user states
+ */
+struct cet_user_state {
+	u64 user_cet;			/* user control-flow settings */
+	u64 user_ssp;			/* user shadow stack pointer */
+};
+
+/*
+ * State component 12 is Control-flow Enforcement kernel states
+ */
+struct cet_kernel_state {
+	u64 kernel_ssp;			/* kernel shadow stack */
+	u64 pl1_ssp;			/* privilege level 1 shadow stack */
+	u64 pl2_ssp;			/* privilege level 2 shadow stack */
+};
+
 /*
  * State component 15: Architectural LBR configuration state.
  * The size of Arch LBR state depends on the number of LBRs (lbr_depth).
arch/x86/include/asm/fpu/xstate.h +4 -2
index 47a92232d595..582f3575e0bd 100644
@@ -35,7 +35,8 @@
 				      XFEATURE_MASK_BNDCSR)
 
 /* All currently supported supervisor features */
-#define XFEATURE_MASK_SUPERVISOR_SUPPORTED (XFEATURE_MASK_PASID)
+#define XFEATURE_MASK_SUPERVISOR_SUPPORTED (XFEATURE_MASK_PASID | \
+					    XFEATURE_MASK_CET_USER)
 
 /*
  * A supervisor state component may not always contain valuable information,
@@ -62,7 +63,8 @@
  * Unsupported supervisor features. When a supervisor feature in this mask is
  * supported in the future, move it to the supported supervisor feature mask.
  */
-#define XFEATURE_MASK_SUPERVISOR_UNSUPPORTED (XFEATURE_MASK_PT)
+#define XFEATURE_MASK_SUPERVISOR_UNSUPPORTED (XFEATURE_MASK_PT | \
+					      XFEATURE_MASK_CET_KERNEL)
 
 /* All supervisor states including supported and unsupported states. */
 #define XFEATURE_MASK_SUPERVISOR_ALL (XFEATURE_MASK_SUPERVISOR_SUPPORTED | \
arch/x86/include/asm/msr-index.h +19 -0
index 546d6ecf0a35..fae6b3ea1f6d 100644
@@ -933,4 +933,23 @@
 #define MSR_VM_IGNNE                    0xc0010115
 #define MSR_VM_HSAVE_PA                 0xc0010117
 
+/* Control-flow Enforcement Technology MSRs */
+#define MSR_IA32_U_CET		0x6a0 /* user mode cet setting */
+#define MSR_IA32_S_CET		0x6a2 /* kernel mode cet setting */
+#define CET_SHSTK_EN		BIT_ULL(0)
+#define CET_WRSS_EN		BIT_ULL(1)
+#define CET_ENDBR_EN		BIT_ULL(2)
+#define CET_LEG_IW_EN		BIT_ULL(3)
+#define CET_NO_TRACK_EN		BIT_ULL(4)
+#define CET_SUPPRESS_DISABLE	BIT_ULL(5)
+#define CET_RESERVED		(BIT_ULL(6) | BIT_ULL(7) | BIT_ULL(8) | BIT_ULL(9))
+#define CET_SUPPRESS		BIT_ULL(10)
+#define CET_WAIT_ENDBR		BIT_ULL(11)
+
+#define MSR_IA32_PL0_SSP	0x6a4 /* kernel shadow stack pointer */
+#define MSR_IA32_PL1_SSP	0x6a5 /* ring-1 shadow stack pointer */
+#define MSR_IA32_PL2_SSP	0x6a6 /* ring-2 shadow stack pointer */
+#define MSR_IA32_PL3_SSP	0x6a7 /* user shadow stack pointer */
+#define MSR_IA32_INT_SSP_TAB	0x6a8 /* exception shadow stack table */
+
 #endif /* _ASM_X86_MSR_INDEX_H */
arch/x86/kernel/fpu/xstate.c +9 -1
index 5d8047441a0a..22eedf8066bf 100644
@@ -38,6 +38,8 @@ static const char *xfeature_names[] =
 	"Processor Trace (unused)"	,
 	"Protection Keys User registers",
 	"PASID state",
+	"Control-flow User registers"	,
+	"Control-flow Kernel registers"	,
 	"unknown xstate feature"	,
 };
 
@@ -53,6 +55,8 @@ static short xsave_cpuid_features[] __initdata = {
 	X86_FEATURE_INTEL_PT,
 	X86_FEATURE_PKU,
 	X86_FEATURE_ENQCMD,
+	X86_FEATURE_CET, /* XFEATURE_CET_USER */
+	X86_FEATURE_CET, /* XFEATURE_CET_KERNEL */
 };
 
 /*
@@ -321,6 +325,8 @@ static void __init print_xstate_features(void)
 	print_xstate_feature(XFEATURE_MASK_Hi16_ZMM);
 	print_xstate_feature(XFEATURE_MASK_PKRU);
 	print_xstate_feature(XFEATURE_MASK_PASID);
+	print_xstate_feature(XFEATURE_MASK_CET_USER);
+	print_xstate_feature(XFEATURE_MASK_CET_KERNEL);
 }
 
 /*
@@ -596,6 +602,8 @@ static void check_xstate_against_struct(int nr)
 	XCHECK_SZ(sz, nr, XFEATURE_Hi16_ZMM,  struct avx_512_hi16_state);
 	XCHECK_SZ(sz, nr, XFEATURE_PKRU,      struct pkru_state);
 	XCHECK_SZ(sz, nr, XFEATURE_PASID,     struct ia32_pasid_state);
+	XCHECK_SZ(sz, nr, XFEATURE_CET_USER,   struct cet_user_state);
+	XCHECK_SZ(sz, nr, XFEATURE_CET_KERNEL, struct cet_kernel_state);
 
 	/*
 	 * Make *SURE* to add any feature numbers in below if
@@ -605,7 +613,7 @@ static void check_xstate_against_struct(int nr)
 	if ((nr < XFEATURE_YMM) ||
 	    (nr >= XFEATURE_MAX) ||
 	    (nr == XFEATURE_PT_UNIMPLEMENTED_SO_FAR) ||
-	    ((nr >= XFEATURE_RSRVD_COMP_11) && (nr <= XFEATURE_LBR))) {
+	    ((nr >= XFEATURE_RSRVD_COMP_13) && (nr <= XFEATURE_LBR))) {
 		WARN_ONCE(1, "no structure for xstate: %d\n", nr);
 		XSTATE_WARN_ON(1);
 	}
Signature · 1 line
2.21.0
#12 lore raw

Re: [NEEDS-REVIEW] [PATCH v18 05/25] x86/fpu/xstate: Introduce CET MSR and XSAVES supervisor states

Quoted 10 lines · Yu-cheng Yu
arch/x86/include/asm/fpu/types.h +2 -0
@@ -135,6 +135,8 @@ enum xfeature {
 #define XFEATURE_MASK_PT		(1 << XFEATURE_PT_UNIMPLEMENTED_SO_FAR)
 #define XFEATURE_MASK_PKRU		(1 << XFEATURE_PKRU)
 #define XFEATURE_MASK_PASID		(1 << XFEATURE_PASID)
+#define XFEATURE_MASK_CET_USER		(1 << XFEATURE_CET_USER)
+#define XFEATURE_MASK_CET_KERNEL	(1 << XFEATURE_CET_KERNEL)
 #define XFEATURE_MASK_LBR		(1 << XFEATURE_LBR)
 
 #define XFEATURE_MASK_FPSSE		(XFEATURE_MASK_FP | XFEATURE_MASK_SSE)

arch/x86/include/asm/fpu/types.h struct pkru_state { · line 248

Quoted 10 lines
arch/x86/include/asm/fpu/types.h +7 -0
@@ -237,6 +239,23 @@ struct pkru_state {
 	u32				pad;
 } __packed;
 
+/*
+ * State component 11 is Control-flow Enforcement user states
+ */
+struct cet_user_state {
+	u64 user_cet;			/* user control-flow settings */
+	u64 user_ssp;			/* user shadow stack pointer */
+};

Andy Cooper just mentioned on IRC about this nugget in the spec:

XRSTORS on CET state will do reserved bit and canonicality checks on the state in similar manner as done by the WRMSR to these state elements.

We're using copy_kernel_to_xregs_err(), so the #GP *should* be OK. Could we prove this out in practice, please?

#13 lore raw

Re: [NEEDS-REVIEW] [PATCH v18 05/25] x86/fpu/xstate: Introduce CET MSR and XSAVES supervisor states

Quoted 24 lines · Dave Hansen
Quoted 10 lines · Yu-cheng Yu
arch/x86/include/asm/fpu/types.h +2 -0
@@ -135,6 +135,8 @@ enum xfeature {
  #define XFEATURE_MASK_PT		(1 << XFEATURE_PT_UNIMPLEMENTED_SO_FAR)
  #define XFEATURE_MASK_PKRU		(1 << XFEATURE_PKRU)
  #define XFEATURE_MASK_PASID		(1 << XFEATURE_PASID)
+#define XFEATURE_MASK_CET_USER		(1 << XFEATURE_CET_USER)
+#define XFEATURE_MASK_CET_KERNEL	(1 << XFEATURE_CET_KERNEL)
  #define XFEATURE_MASK_LBR		(1 << XFEATURE_LBR)
 
  #define XFEATURE_MASK_FPSSE		(XFEATURE_MASK_FP | XFEATURE_MASK_SSE)

arch/x86/include/asm/fpu/types.h struct pkru_state { · line 248

Quoted 10 lines
arch/x86/include/asm/fpu/types.h +7 -0
@@ -237,6 +239,23 @@ struct pkru_state {
  	u32				pad;
  } __packed;
 
+/*
+ * State component 11 is Control-flow Enforcement user states
+ */
+struct cet_user_state {
+	u64 user_cet;			/* user control-flow settings */
+	u64 user_ssp;			/* user shadow stack pointer */
+};

Andy Cooper just mentioned on IRC about this nugget in the spec:

Quoted 7 lines

XRSTORS on CET state will do reserved bit and canonicality checks on the state in similar manner as done by the WRMSR to these state elements.

We're using copy_kernel_to_xregs_err(), so the #GP *should* be OK. Could we prove this out in practice, please?

Do we want to verify that setting reserved bits in CET XSAVES states triggers GP? Then, yes, I just verified it again. Thanks for reminding. Do we have any particular case relating to this?

--
Yu-cheng

#14 lore raw

Re: [PATCH v18 05/25] x86/fpu/xstate: Introduce CET MSR and XSAVES supervisor states

Quoted 6 lines · Yu-cheng
Quoted 6 lines

Andy Cooper just mentioned on IRC about this nugget in the spec:

    XRSTORS on CET state will do reserved bit and canonicality checks on the state in similar manner as done by the WRMSR to these state elements.

Quoted 6 lines
Quoted 3 lines

We're using copy_kernel_to_xregs_err(), so the #GP *should* be OK. Could we prove this out in practice, please?

Quoted 1 line

Do we want to verify that setting reserved bits in CET XSAVES states triggers GP?  Then, yes, I just verified it again.  Thanks for reminding.  Do we have any particular case relating to this?

I want to confirm that it triggers #GP and kills userspace without the kernel WARN'ing or otherwise being visibly unhappy.

What about the return-to-userspace path after a ptracer writes content
to the CET fields? I don't see the same tolerance for errors in
__fpregs_load_activate(), for instance.

#15 lore raw

Re: [PATCH v18 05/25] x86/fpu/xstate: Introduce CET MSR and XSAVES supervisor states

Quoted 10 lines · Dave Hansen
Quoted 9 lines · Yu-cheng
Quoted 9 lines

Andy Cooper just mentioned on IRC about this nugget in the spec:

    XRSTORS on CET state will do reserved bit and canonicality checks on the state in similar manner as done by the WRMSR to these state elements.

We're using copy_kernel_to_xregs_err(), so the #GP *should* be OK. Could we prove this out in practice, please?

Quoted 1 line
Quoted 6 lines
Quoted 3 lines

Do we want to verify that setting reserved bits in CET XSAVES states triggers GP?  Then, yes, I just verified it again.  Thanks for reminding.  Do we have any particular case relating to this?

I want to confirm that it triggers #GP and kills userspace without the kernel WARN'ing or otherwise being visibly unhappy.

For sigreturn, shadow stack pointer is checked against its restore token and must be smaller than TASK_SIZE_MAX. Sigreturn cannot set any MSR_IA32_U_CET reserved bits.

Quoted 5 lines

What about the return-to-userspace path after a ptracer writes content
to the CET fields? I don't see the same tolerance for errors in
__fpregs_load_activate(), for instance.

Good thought. I have not sent out my revised PTRACE patch, but values from user will be checked for valid address and reserved bits.

--
Yu-cheng

#16 lore raw

Re: [PATCH v18 05/25] x86/fpu/xstate: Introduce CET MSR and XSAVES supervisor states

Quoted 15 lines · Yu-cheng
Quoted 14 lines · Dave Hansen
Quoted 12 lines · Yu-cheng
Quoted 9 lines

Andy Cooper just mentioned on IRC about this nugget in the spec:

     XRSTORS on CET state will do reserved bit and canonicality checks on the state in similar manner as done by the WRMSR to these state elements.

We're using copy_kernel_to_xregs_err(), so the #GP *should* be OK. Could we prove this out in practice, please?

Quoted 1 line

Do we want to verify that setting reserved bits in CET XSAVES states triggers GP?  Then, yes, I just verified it again.  Thanks for reminding.  Do we have any particular case relating to this?

Quoted 6 lines
Quoted 2 lines

I want to confirm that it triggers #GP and kills userspace without the kernel WARN'ing or otherwise being visibly unhappy.

For sigreturn, shadow stack pointer is checked against its restore token and must be smaller than TASK_SIZE_MAX.  Sigreturn cannot set any MSR_IA32_U_CET reserved bits.

That would be nice to at least allude to in the changelog or comments.

Quoted 7 lines
Quoted 4 lines

What about the return-to-userspace path after a ptracer writes content to the CET fields?   I don't see the same tolerance for errors in __fpregs_load_activate(), for instance.

Good thought.  I have not sent out my revised PTRACE patch, but values from user will be checked for valid address and reserved bits.

Wait a sec... What about *THIS* series? Will *THIS* series give us oopses when userspace blasts a new XSAVE buffer in with NT_X86_XSTATE?

#17 lore raw

Re: [PATCH v18 05/25] x86/fpu/xstate: Introduce CET MSR and XSAVES supervisor states

Quoted 16 lines · Dave Hansen
Quoted 15 lines · Yu-cheng
Quoted 14 lines · Dave Hansen
Quoted 12 lines · Yu-cheng
Quoted 9 lines

Andy Cooper just mentioned on IRC about this nugget in the spec:

     XRSTORS on CET state will do reserved bit and canonicality checks on the state in similar manner as done by the WRMSR to these state elements.

We're using copy_kernel_to_xregs_err(), so the #GP *should* be OK. Could we prove this out in practice, please?

Quoted 1 line

Do we want to verify that setting reserved bits in CET XSAVES states triggers GP?  Then, yes, I just verified it again.  Thanks for reminding.  Do we have any particular case relating to this?

Quoted 9 lines
Quoted 6 lines
Quoted 2 lines

I want to confirm that it triggers #GP and kills userspace without the kernel WARN'ing or otherwise being visibly unhappy.

For sigreturn, shadow stack pointer is checked against its restore token and must be smaller than TASK_SIZE_MAX.  Sigreturn cannot set any MSR_IA32_U_CET reserved bits.

That would be nice to at least allude to in the changelog or comments.

Ok.

Quoted 11 lines
Quoted 7 lines
Quoted 4 lines

What about the return-to-userspace path after a ptracer writes content to the CET fields?   I don't see the same tolerance for errors in __fpregs_load_activate(), for instance.

Good thought.  I have not sent out my revised PTRACE patch, but values from user will be checked for valid address and reserved bits.

Wait a sec... What about *THIS* series? Will *THIS* series give us oopses when userspace blasts a new XSAVE buffer in with NT_X86_XSTATE?

Fortunately, CET states are supervisor states. NT_x86_XSTATE has only user states.

#18 lore raw

Re: [PATCH v18 05/25] x86/fpu/xstate: Introduce CET MSR and XSAVES supervisor states

Quoted 8 lines · Yu-cheng
Quoted 5 lines
Quoted 1 line

Wait a sec...  What about *THIS* series?  Will *THIS* series give us oopses when userspace blasts a new XSAVE buffer in with NT_X86_XSTATE?

Fortunately, CET states are supervisor states.  NT_x86_XSTATE has only user states.

Ahhh, good point. You did mention this in the changelog:

Quoted 11 lines

Control-flow Enforcement Technology (CET) introduces these MSRs:

MSR_IA32_U_CET (user-mode CET settings), MSR_IA32_PL3_SSP (user-mode shadow stack pointer),

MSR_IA32_PL0_SSP (kernel-mode shadow stack pointer), MSR_IA32_PL1_SSP (Privilege Level 1 shadow stack pointer), MSR_IA32_PL2_SSP (Privilege Level 2 shadow stack pointer), MSR_IA32_S_CET (kernel-mode CET settings), MSR_IA32_INT_SSP_TAB (exception shadow stack table).

Quoted 3 lines

The two user-mode MSRs belong to XFEATURE_CET_USER. The first three of kernel-mode MSRs belong to XFEATURE_CET_KERNEL. Both XSAVES states are supervisor states.

This is another great place to add some information about the feature.

"Both XSAVES states are supervisor states." ... This means that there is no direct, unprivileged access to this state, making it harder for an attacker to subvert CET.

You could also allude to the future ptrace() support here.

#19 lore raw

Re: [PATCH v18 05/25] x86/fpu/xstate: Introduce CET MSR and XSAVES supervisor states

Quoted 27 lines · Dave Hansen
Quoted 8 lines · Yu-cheng
Quoted 5 lines
Quoted 1 line

Wait a sec...  What about *THIS* series?  Will *THIS* series give us oopses when userspace blasts a new XSAVE buffer in with NT_X86_XSTATE?

Fortunately, CET states are supervisor states.  NT_x86_XSTATE has only user states.

Ahhh, good point. You did mention this in the changelog:

Quoted 11 lines

Control-flow Enforcement Technology (CET) introduces these MSRs:

MSR_IA32_U_CET (user-mode CET settings), MSR_IA32_PL3_SSP (user-mode shadow stack pointer),

MSR_IA32_PL0_SSP (kernel-mode shadow stack pointer), MSR_IA32_PL1_SSP (Privilege Level 1 shadow stack pointer), MSR_IA32_PL2_SSP (Privilege Level 2 shadow stack pointer), MSR_IA32_S_CET (kernel-mode CET settings), MSR_IA32_INT_SSP_TAB (exception shadow stack table).

Quoted 3 lines

The two user-mode MSRs belong to XFEATURE_CET_USER. The first three of kernel-mode MSRs belong to XFEATURE_CET_KERNEL. Both XSAVES states are supervisor states.

Quoted 8 lines

This is another great place to add some information about the feature.

"Both XSAVES states are supervisor states." ... This means that there is no direct, unprivileged access to this state, making it harder for an attacker to subvert CET.

You could also allude to the future ptrace() support here.

I will add that.

#20 lore raw

PATCH v18 6/25 x86/cet: Add control-protection fault handler

In reply to Yu-cheng Yu

A control-protection fault is triggered when a control-flow transfer attempt violates Shadow Stack or Indirect Branch Tracking constraints. For example, the return address for a RET instruction differs from the copy on the shadow stack; or an indirect JMP instruction, without the NOTRACK prefix, arrives at a non-ENDBR opcode.

The control-protection fault handler works in a similar way as the general protection fault handler. It provides the si_code SEGV_CPERR to the signal handler.

Cc Michael Kerrisk <[email protected]>
---
 arch/x86/include/asm/idtentry.h    |  4 ++
 arch/x86/kernel/idt.c              |  4 ++
 arch/x86/kernel/signal_compat.c    |  2 +-
 arch/x86/kernel/traps.c            | 60 ++++++++++++++++++++++++++++++
 include/uapi/asm-generic/siginfo.h |  3 +-
 5 files changed, 71 insertions(+), 2 deletions(-)
arch/x86/include/asm/idtentry.h +4 -0
index 247a60a47331..3805a776b5ca 100644
@@ -574,6 +574,10 @@ DECLARE_IDTENTRY_ERRORCODE(X86_TRAP_SS,	exc_stack_segment);
 DECLARE_IDTENTRY_ERRORCODE(X86_TRAP_GP,	exc_general_protection);
 DECLARE_IDTENTRY_ERRORCODE(X86_TRAP_AC,	exc_alignment_check);
 
+#ifdef CONFIG_X86_CET
+DECLARE_IDTENTRY_ERRORCODE(X86_TRAP_CP, exc_control_protection);
+#endif
+
 /* Raw exception entries which need extra work */
 DECLARE_IDTENTRY_RAW(X86_TRAP_UD,		exc_invalid_op);
 DECLARE_IDTENTRY_RAW(X86_TRAP_BP,		exc_int3);
arch/x86/kernel/idt.c +4 -0
index ee1a283f8e96..e8166d9bbb10 100644
@@ -105,6 +105,10 @@ static const __initconst struct idt_data def_idts[] = {
 #elif defined(CONFIG_X86_32)
 	SYSG(IA32_SYSCALL_VECTOR,	entry_INT80_32),
 #endif
+
+#ifdef CONFIG_X86_CET
+	INTG(X86_TRAP_CP,		asm_exc_control_protection),
+#endif
 };
 
 /*
arch/x86/kernel/signal_compat.c +1 -1
index a5330ff498f0..dd92490b1e7f 100644
@@ -27,7 +27,7 @@ static inline void signal_compat_build_tests(void)
 	 */
 	BUILD_BUG_ON(NSIGILL  != 11);
 	BUILD_BUG_ON(NSIGFPE  != 15);
-	BUILD_BUG_ON(NSIGSEGV != 9);
+	BUILD_BUG_ON(NSIGSEGV != 10);
 	BUILD_BUG_ON(NSIGBUS  != 5);
 	BUILD_BUG_ON(NSIGTRAP != 5);
 	BUILD_BUG_ON(NSIGCHLD != 6);
arch/x86/kernel/traps.c +60 -0

66 lines not on this page · raw message

include/uapi/asm-generic/siginfo.h +2 -1
index d2597000407a..1c2ea91284a0 100644
@@ -231,7 +231,8 @@ typedef struct siginfo {
 #define SEGV_ADIPERR	7	/* Precise MCD exception */
 #define SEGV_MTEAERR	8	/* Asynchronous ARM MTE error */
 #define SEGV_MTESERR	9	/* Synchronous ARM MTE exception */
-#define NSIGSEGV	9
+#define SEGV_CPERR	10	/* Control protection fault */
+#define NSIGSEGV	10
 
 /*
  * SIGBUS si_codes
Signature · 1 line
2.21.0
#21 lore raw

PATCH v18 7/25 x86/mm: Remove _PAGE_DIRTY from kernel RO pages

In reply to Yu-cheng Yu

The x86 family of processors do not directly create read-only and Dirty PTEs. These PTEs are created by software. One such case is that kernel read-only pages are historically setup as Dirty.

New processors that support Shadow Stack regard read-only and Dirty PTEs as shadow stack pages. This results in ambiguity between shadow stack and kernel read-only pages. To resolve this, removed Dirty from kernel read- only pages.

Cc "H. Peter Anvin" <[email protected]>
Cc Kees Cook <[email protected]>
Cc Thomas Gleixner <[email protected]>
Cc Dave Hansen <[email protected]>
Cc Christoph Hellwig <[email protected]>
Cc Andy Lutomirski <[email protected]>
Cc Ingo Molnar <[email protected]>
Cc Borislav Petkov <[email protected]>
Cc Peter Zijlstra <[email protected]>
---
 arch/x86/include/asm/pgtable_types.h | 6 +++---
 arch/x86/mm/pat/set_memory.c         | 2 +-
 2 files changed, 4 insertions(+), 4 deletions(-)
arch/x86/include/asm/pgtable_types.h +3 -3
index 394757ee030a..b8b79d618bbc 100644
@@ -194,10 +194,10 @@ enum page_cache_mode {
 #define _KERNPG_TABLE		 (__PP|__RW|   0|___A|   0|___D|   0|   0| _ENC)
 #define _PAGE_TABLE_NOENC	 (__PP|__RW|_USR|___A|   0|___D|   0|   0)
 #define _PAGE_TABLE		 (__PP|__RW|_USR|___A|   0|___D|   0|   0| _ENC)
-#define __PAGE_KERNEL_RO	 (__PP|   0|   0|___A|__NX|___D|   0|___G)
-#define __PAGE_KERNEL_ROX	 (__PP|   0|   0|___A|   0|___D|   0|___G)
+#define __PAGE_KERNEL_RO	 (__PP|   0|   0|___A|__NX|   0|   0|___G)
+#define __PAGE_KERNEL_ROX	 (__PP|   0|   0|___A|   0|   0|   0|___G)
 #define __PAGE_KERNEL_NOCACHE	 (__PP|__RW|   0|___A|__NX|___D|   0|___G| __NC)
-#define __PAGE_KERNEL_VVAR	 (__PP|   0|_USR|___A|__NX|___D|   0|___G)
+#define __PAGE_KERNEL_VVAR	 (__PP|   0|_USR|___A|__NX|   0|   0|___G)
 #define __PAGE_KERNEL_LARGE	 (__PP|__RW|   0|___A|__NX|___D|_PSE|___G)
 #define __PAGE_KERNEL_LARGE_EXEC (__PP|__RW|   0|___A|   0|___D|_PSE|___G)
 #define __PAGE_KERNEL_WP	 (__PP|__RW|   0|___A|__NX|___D|   0|___G| __WP)
arch/x86/mm/pat/set_memory.c +1 -1
index 16f878c26667..6bebb95a6988 100644
@@ -1932,7 +1932,7 @@ int set_memory_nx(unsigned long addr, int numpages)
 
 int set_memory_ro(unsigned long addr, int numpages)
 {
-	return change_page_attr_clear(&addr, numpages, __pgprot(_PAGE_RW), 0);
+	return change_page_attr_clear(&addr, numpages, __pgprot(_PAGE_RW | _PAGE_DIRTY), 0);
 }
 
 int set_memory_rw(unsigned long addr, int numpages)
Signature · 1 line
2.21.0
#22 lore raw

PATCH v18 8/25 x86/mm: Introduce _PAGE_COW

In reply to Yu-cheng Yu

There is essentially no room left in the x86 hardware PTEs on some OSes (not Linux). That left the hardware architects looking for a way to represent a new memory type (shadow stack) within the existing bits. They chose to repurpose a lightly-used state: Write=0, Dirty=1.

The reason it's lightly used is that Dirty=1 is normally set by hardware and cannot normally be set by hardware on a Write=0 PTE. Software must normally be involved to create one of these PTEs, so software can simply opt to not create them.

In places where Linux normally creates Write=0, Dirty=1, it can use the software-defined _PAGE_COW in place of the hardware _PAGE_DIRTY. In other words, whenever Linux needs to create Write=0, Dirty=1, it instead creates Write=0, Cow=1, except for shadow stack, which is Write=0, Dirty=1. This clearly separates shadow stack from other data, and results in the following:

(a) A modified, copy-on-write (COW) page: (Write=0, Cow=1)
(b) A R/O page that has been COW'ed: (Write=0, Cow=1)
The user page is in a R/O VMA, and get_user_pages() needs a writable copy. The page fault handler creates a copy of the page and sets the new copy's PTE as Write=0 and Cow=1.
(c) A shadow stack PTE: (Write=0, Dirty=1)
(d) A shared shadow stack PTE: (Write=0, Cow=1)
When a shadow stack page is being shared among processes (this happens at fork()), its PTE is made Dirty=0, so the next shadow stack access causes a fault, and the page is duplicated and Dirty=1 is set again. This is the COW equivalent for shadow stack pages, even though it's copy-on-access rather than copy-on-write.
(e) A page where the processor observed a Write=1 PTE, started a write, set Dirty=1, but then observed a Write=0 PTE. That's possible today, but will not happen on processors that support shadow stack.

Define _PAGE_COW and update pte_*() helpers and apply the same changes to pmd and pud.

After this, there are six free bits left in the 64-bit PTE, and no more free bits in the 32-bit PTE (except for PAE) and Shadow Stack is not implemented for the 32-bit kernel.

---
 arch/x86/include/asm/pgtable.h       | 125 ++++++++++++++++++++++++---
 arch/x86/include/asm/pgtable_types.h |  42 ++++++++-
 2 files changed, 154 insertions(+), 13 deletions(-)
arch/x86/include/asm/pgtable.h +113 -12
index a02c67291cfc..4b0ec61510dc 100644
@@ -121,9 +121,9 @@ extern pmdval_t early_pmd_flags;
  * The following only work if pte_present() is true.
  * Undefined behaviour if not..
  */
-static inline int pte_dirty(pte_t pte)
+static inline bool pte_dirty(pte_t pte)
 {
-	return pte_flags(pte) & _PAGE_DIRTY;
+	return pte_flags(pte) & _PAGE_DIRTY_BITS;
 }
 
 
@@ -160,9 +160,9 @@ static inline int pte_young(pte_t pte)
 	return pte_flags(pte) & _PAGE_ACCESSED;
 }
 
-static inline int pmd_dirty(pmd_t pmd)
+static inline bool pmd_dirty(pmd_t pmd)
 {
-	return pmd_flags(pmd) & _PAGE_DIRTY;
+	return pmd_flags(pmd) & _PAGE_DIRTY_BITS;
 }
 
 static inline int pmd_young(pmd_t pmd)
@@ -170,9 +170,9 @@ static inline int pmd_young(pmd_t pmd)
 	return pmd_flags(pmd) & _PAGE_ACCESSED;
 }
 
-static inline int pud_dirty(pud_t pud)
+static inline bool pud_dirty(pud_t pud)
 {
-	return pud_flags(pud) & _PAGE_DIRTY;
+	return pud_flags(pud) & _PAGE_DIRTY_BITS;
 }
 
 static inline int pud_young(pud_t pud)
@@ -182,7 +182,14 @@ static inline int pud_young(pud_t pud)
 
 static inline int pte_write(pte_t pte)
 {
-	return pte_flags(pte) & _PAGE_RW;
+	/*
+	 * If _PAGE_DIRTY is set, the PTE must either have _PAGE_RW or be
+	 * a shadow stack PTE, which is logically writable.
+	 */
+	if (cpu_feature_enabled(X86_FEATURE_SHSTK))
+		return pte_flags(pte) & (_PAGE_RW | _PAGE_DIRTY);
+	else
+		return pte_flags(pte) & _PAGE_RW;
 }
 
 static inline int pte_huge(pte_t pte)
@@ -333,7 +340,7 @@ static inline pte_t pte_clear_uffd_wp(pte_t pte)
 
 static inline pte_t pte_mkclean(pte_t pte)
 {
-	return pte_clear_flags(pte, _PAGE_DIRTY);
+	return pte_clear_flags(pte, _PAGE_DIRTY_BITS);
 }
 
 static inline pte_t pte_mkold(pte_t pte)
@@ -343,6 +350,18 @@ static inline pte_t pte_mkold(pte_t pte)
 
 static inline pte_t pte_wrprotect(pte_t pte)
 {
+	/*
+	 * Blindly clearing _PAGE_RW might accidentally create
+	 * a shadow stack PTE (RW=0, Dirty=1).  Move the hardware
+	 * dirty value to the software bit.
+	 */
+	if (cpu_feature_enabled(X86_FEATURE_SHSTK)) {
+		if (pte_flags(pte) & _PAGE_DIRTY) {
+			pte = pte_clear_flags(pte, _PAGE_DIRTY);
+			pte = pte_set_flags(pte, _PAGE_COW);
+		}
+	}
+
 	return pte_clear_flags(pte, _PAGE_RW);
 }
 
@@ -353,6 +372,18 @@ static inline pte_t pte_mkexec(pte_t pte)
 
 static inline pte_t pte_mkdirty(pte_t pte)
 {
+	pteval_t dirty = _PAGE_DIRTY;
+
+	/* Avoid creating (HW)Dirty=1, Write=0 PTEs */
+	if (cpu_feature_enabled(X86_FEATURE_SHSTK) && !pte_write(pte))
+		dirty = _PAGE_COW;
+
+	return pte_set_flags(pte, dirty | _PAGE_SOFT_DIRTY);
+}
+
+static inline pte_t pte_mkwrite_shstk(pte_t pte)
+{
+	pte = pte_clear_flags(pte, _PAGE_COW);
 	return pte_set_flags(pte, _PAGE_DIRTY | _PAGE_SOFT_DIRTY);
 }
 
@@ -363,6 +394,13 @@ static inline pte_t pte_mkyoung(pte_t pte)
 
 static inline pte_t pte_mkwrite(pte_t pte)
 {
+	if (cpu_feature_enabled(X86_FEATURE_SHSTK)) {
+		if (pte_flags(pte) & _PAGE_COW) {
+			pte = pte_clear_flags(pte, _PAGE_COW);
+			pte = pte_set_flags(pte, _PAGE_DIRTY);
+		}
+	}
+
 	return pte_set_flags(pte, _PAGE_RW);
 }
 
@@ -434,16 +472,40 @@ static inline pmd_t pmd_mkold(pmd_t pmd)
 
 static inline pmd_t pmd_mkclean(pmd_t pmd)
 {
-	return pmd_clear_flags(pmd, _PAGE_DIRTY);
+	return pmd_clear_flags(pmd, _PAGE_DIRTY_BITS);
 }
 
 static inline pmd_t pmd_wrprotect(pmd_t pmd)
 {
+	/*
+	 * Blindly clearing _PAGE_RW might accidentally create
+	 * a shadow stack PMD (RW=0, Dirty=1).  Move the hardware
+	 * dirty value to the software bit.
+	 */
+	if (cpu_feature_enabled(X86_FEATURE_SHSTK)) {
+		if (pmd_flags(pmd) & _PAGE_DIRTY) {
+			pmd = pmd_clear_flags(pmd, _PAGE_DIRTY);
+			pmd = pmd_set_flags(pmd, _PAGE_COW);
+		}
+	}
+
 	return pmd_clear_flags(pmd, _PAGE_RW);
 }
 
 static inline pmd_t pmd_mkdirty(pmd_t pmd)
 {
+	pmdval_t dirty = _PAGE_DIRTY;
+
+	/* Avoid creating (HW)Dirty=1, Write=0 PMDs */
+	if (cpu_feature_enabled(X86_FEATURE_SHSTK) && !(pmd_flags(pmd) & _PAGE_RW))
+		dirty = _PAGE_COW;
+
+	return pmd_set_flags(pmd, dirty | _PAGE_SOFT_DIRTY);
+}
+
+static inline pmd_t pmd_mkwrite_shstk(pmd_t pmd)
+{
+	pmd = pmd_clear_flags(pmd, _PAGE_COW);
 	return pmd_set_flags(pmd, _PAGE_DIRTY | _PAGE_SOFT_DIRTY);
 }
 
@@ -464,6 +526,13 @@ static inline pmd_t pmd_mkyoung(pmd_t pmd)
 
 static inline pmd_t pmd_mkwrite(pmd_t pmd)
 {
+	if (cpu_feature_enabled(X86_FEATURE_SHSTK)) {
+		if (pmd_flags(pmd) & _PAGE_COW) {
+			pmd = pmd_clear_flags(pmd, _PAGE_COW);
+			pmd = pmd_set_flags(pmd, _PAGE_DIRTY);
+		}
+	}
+
 	return pmd_set_flags(pmd, _PAGE_RW);
 }
 
@@ -488,17 +557,35 @@ static inline pud_t pud_mkold(pud_t pud)
 
 static inline pud_t pud_mkclean(pud_t pud)
 {
-	return pud_clear_flags(pud, _PAGE_DIRTY);
+	return pud_clear_flags(pud, _PAGE_DIRTY_BITS);
 }
 
 static inline pud_t pud_wrprotect(pud_t pud)
 {
+	/*
+	 * Blindly clearing _PAGE_RW might accidentally create
+	 * a shadow stack PUD (RW=0, Dirty=1).  Move the hardware
+	 * dirty value to the software bit.
+	 */
+	if (cpu_feature_enabled(X86_FEATURE_SHSTK)) {
+		if (pud_flags(pud) & _PAGE_DIRTY) {
+			pud = pud_clear_flags(pud, _PAGE_DIRTY);
+			pud = pud_set_flags(pud, _PAGE_COW);
+		}
+	}
+
 	return pud_clear_flags(pud, _PAGE_RW);
 }
 
 static inline pud_t pud_mkdirty(pud_t pud)
 {
-	return pud_set_flags(pud, _PAGE_DIRTY | _PAGE_SOFT_DIRTY);
+	pudval_t dirty = _PAGE_DIRTY;
+
+	/* Avoid creating (HW)Dirty=1, Write=0 PUDs */
+	if (cpu_feature_enabled(X86_FEATURE_SHSTK) && !(pud_flags(pud) & _PAGE_RW))
+		dirty = _PAGE_COW;
+
+	return pud_set_flags(pud, dirty | _PAGE_SOFT_DIRTY);
 }
 
 static inline pud_t pud_mkdevmap(pud_t pud)
@@ -518,6 +605,13 @@ static inline pud_t pud_mkyoung(pud_t pud)
 
 static inline pud_t pud_mkwrite(pud_t pud)
 {
+	if (cpu_feature_enabled(X86_FEATURE_SHSTK)) {
+		if (pud_flags(pud) & _PAGE_COW) {
+			pud = pud_clear_flags(pud, _PAGE_COW);
+			pud = pud_set_flags(pud, _PAGE_DIRTY);
+		}
+	}
+
 	return pud_set_flags(pud, _PAGE_RW);
 }
 
@@ -1131,7 +1225,14 @@ extern int pmdp_clear_flush_young(struct vm_area_struct *vma,
 #define pmd_write pmd_write
 static inline int pmd_write(pmd_t pmd)
 {
-	return pmd_flags(pmd) & _PAGE_RW;
+	/*
+	 * If _PAGE_DIRTY is set, then the PMD must either have _PAGE_RW or
+	 * be a shadow stack PMD, which is logically writable.
+	 */
+	if (cpu_feature_enabled(X86_FEATURE_SHSTK))
+		return pmd_flags(pmd) & (_PAGE_RW | _PAGE_DIRTY);
+	else
+		return pmd_flags(pmd) & _PAGE_RW;
 }
 
 #define __HAVE_ARCH_PMDP_HUGE_GET_AND_CLEAR
arch/x86/include/asm/pgtable_types.h +41 -1

60 lines not on this page · raw message

Signature · 1 line
2.21.0
#23 lore raw

PATCH v18 9/25 drm/i915/gvt: Change _PAGE_DIRTY to _PAGE_DIRTY_BITS

In reply to Yu-cheng Yu

After the introduction of _PAGE_COW, a modified page's PTE can have either _PAGE_DIRTY or _PAGE_COW. Change _PAGE_DIRTY to _PAGE_DIRTY_BITS.

Cc David Airlie <[email protected]>
Cc Joonas Lahtinen <[email protected]>
Cc Jani Nikula <[email protected]>
Cc Daniel Vetter <[email protected]>
Cc Rodrigo Vivi <[email protected]>
Cc Zhenyu Wang <[email protected]>
Cc Zhi Wang <[email protected]>
---
 drivers/gpu/drm/i915/gvt/gtt.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/gpu/drm/i915/gvt/gtt.c +1 -1
index 897c007ea96a..937b6083b2dc 100644
@@ -1216,7 +1216,7 @@ static int split_2MB_gtt_entry(struct intel_vgpu *vgpu,
 	}
 
 	/* Clear dirty field. */
-	se->val64 &= ~_PAGE_DIRTY;
+	se->val64 &= ~_PAGE_DIRTY_BITS;
 
 	ops->clear_pse(se);
 	ops->clear_ips(se);
Signature · 1 line
2.21.0
#24 lore raw

PATCH v18 10/25 x86/mm: Update pte_modify for _PAGE_COW

In reply to Yu-cheng Yu

The read-only and Dirty PTE has been used to indicate copy-on-write pages. However, newer x86 processors also regard a read-only and Dirty PTE as a shadow stack page. In order to separate the two, the software-defined _PAGE_COW is created to replace _PAGE_DIRTY for the copy-on-write case, and pte_*() are updated.

Pte_modify() changes a PTE to 'newprot', but it doesn't use the pte_*(). Introduce fixup_dirty_pte(), which sets a dirty PTE, based on _PAGE_RW, to either _PAGE_DIRTY or _PAGE_COW.

Apply the same changes to pmd_modify().

---
 arch/x86/include/asm/pgtable.h | 33 +++++++++++++++++++++++++++++++++
 1 file changed, 33 insertions(+)
arch/x86/include/asm/pgtable.h +33 -0
index 4b0ec61510dc..4a7fd3e5b7df 100644
@@ -726,6 +726,21 @@ static inline pmd_t pmd_mkinvalid(pmd_t pmd)
 
 static inline u64 flip_protnone_guard(u64 oldval, u64 val, u64 mask);
 
+static inline pteval_t fixup_dirty_pte(pteval_t pteval)
+{
+	pte_t pte = __pte(pteval);
+
+	if (cpu_feature_enabled(X86_FEATURE_SHSTK) && pte_dirty(pte)) {
+		pte = pte_mkclean(pte);
+
+		if (pte_flags(pte) & _PAGE_RW)
+			pte = pte_set_flags(pte, _PAGE_DIRTY);
+		else
+			pte = pte_set_flags(pte, _PAGE_COW);
+	}
+	return pte_val(pte);
+}
+
 static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
 {
 	pteval_t val = pte_val(pte), oldval = val;
@@ -736,16 +751,34 @@ static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
 	 */
 	val &= _PAGE_CHG_MASK;
 	val |= check_pgprot(newprot) & ~_PAGE_CHG_MASK;
+	val = fixup_dirty_pte(val);
 	val = flip_protnone_guard(oldval, val, PTE_PFN_MASK);
 	return __pte(val);
 }
 
+static inline int pmd_write(pmd_t pmd);
+static inline pmdval_t fixup_dirty_pmd(pmdval_t pmdval)
+{
+	pmd_t pmd = __pmd(pmdval);
+
+	if (cpu_feature_enabled(X86_FEATURE_SHSTK) && pmd_dirty(pmd)) {
+		pmd = pmd_mkclean(pmd);
+
+		if (pmd_flags(pmd) & _PAGE_RW)
+			pmd = pmd_set_flags(pmd, _PAGE_DIRTY);
+		else
+			pmd = pmd_set_flags(pmd, _PAGE_COW);
+	}
+	return pmd_val(pmd);
+}
+
 static inline pmd_t pmd_modify(pmd_t pmd, pgprot_t newprot)
 {
 	pmdval_t val = pmd_val(pmd), oldval = val;
 
 	val &= _HPAGE_CHG_MASK;
 	val |= check_pgprot(newprot) & ~_HPAGE_CHG_MASK;
+	val = fixup_dirty_pmd(val);
 	val = flip_protnone_guard(oldval, val, PHYSICAL_PMD_PAGE_MASK);
 	return __pmd(val);
 }
Signature · 1 line
2.21.0
#25 lore raw

PATCH v18 11/25 x86/mm: Update ptep_set_wrprotect() and pmdp_set_wrprotect() for transition from _PAGE_DIRTY to _PAGE_COW

In reply to Yu-cheng Yu

When Shadow Stack is introduced, [R/O + _PAGE_DIRTY] PTE is reserved for shadow stack. Copy-on-write PTEs have [R/O + _PAGE_COW].

When a PTE goes from [R/W + _PAGE_DIRTY] to [R/O + _PAGE_COW], it could become a transient shadow stack PTE in two cases:

The first case is that some processors can start a write but end up seeing a read-only PTE by the time they get to the Dirty bit, creating a transient shadow stack PTE. However, this will not occur on processors supporting Shadow Stack, and a TLB flush is not necessary.

The second case is that when _PAGE_DIRTY is replaced with _PAGE_COW non- atomically, a transient shadow stack PTE can be created as a result. Thus, prevent that with cmpxchg.

Dave Hansen, Jann Horn, Andy Lutomirski, and Peter Zijlstra provided many insights to the issue. Jann Horn provided the cmpxchg solution.

---
 arch/x86/include/asm/pgtable.h | 36 ++++++++++++++++++++++++++++++++++
 1 file changed, 36 insertions(+)
arch/x86/include/asm/pgtable.h +36 -0
index 4a7fd3e5b7df..2144a25ca2a3 100644
@@ -1229,6 +1229,24 @@ static inline pte_t ptep_get_and_clear_full(struct mm_struct *mm,
 static inline void ptep_set_wrprotect(struct mm_struct *mm,
 				      unsigned long addr, pte_t *ptep)
 {
+	/*
+	 * If Shadow Stack is enabled, pte_wrprotect() moves _PAGE_DIRTY
+	 * to _PAGE_COW (see comments at pte_wrprotect()).
+	 * When a thread reads a RW=1, Dirty=0 PTE and before changing it
+	 * to RW=0, Dirty=0, another thread could have written to the page
+	 * and the PTE is RW=1, Dirty=1 now.  Use try_cmpxchg() to detect
+	 * PTE changes and update old_pte, then try again.
+	 */
+	if (cpu_feature_enabled(X86_FEATURE_SHSTK)) {
+		pte_t old_pte, new_pte;
+
+		old_pte = READ_ONCE(*ptep);
+		do {
+			new_pte = pte_wrprotect(old_pte);
+		} while (!try_cmpxchg(&ptep->pte, &old_pte.pte, new_pte.pte));
+
+		return;
+	}
 	clear_bit(_PAGE_BIT_RW, (unsigned long *)&ptep->pte);
 }
 
@@ -1286,6 +1304,24 @@ static inline pud_t pudp_huge_get_and_clear(struct mm_struct *mm,
 static inline void pmdp_set_wrprotect(struct mm_struct *mm,
 				      unsigned long addr, pmd_t *pmdp)
 {
+	/*
+	 * If Shadow Stack is enabled, pmd_wrprotect() moves _PAGE_DIRTY
+	 * to _PAGE_COW (see comments at pmd_wrprotect()).
+	 * When a thread reads a RW=1, Dirty=0 PMD and before changing it
+	 * to RW=0, Dirty=0, another thread could have written to the page
+	 * and the PMD is RW=1, Dirty=1 now.  Use try_cmpxchg() to detect
+	 * PMD changes and update old_pmd, then try again.
+	 */
+	if (cpu_feature_enabled(X86_FEATURE_SHSTK)) {
+		pmd_t old_pmd, new_pmd;
+
+		old_pmd = READ_ONCE(*pmdp);
+		do {
+			new_pmd = pmd_wrprotect(old_pmd);
+		} while (!try_cmpxchg((pmdval_t *)pmdp, (pmdval_t *)&old_pmd, pmd_val(new_pmd)));
+
+		return;
+	}
 	clear_bit(_PAGE_BIT_RW, (unsigned long *)pmdp);
 }
 
Signature · 1 line
2.21.0
#26 lore raw

PATCH v18 12/25 mm: Introduce VM_SHSTK for shadow stack memory

In reply to Yu-cheng Yu

A shadow stack PTE must be read-only and have _PAGE_DIRTY set. However, read-only and Dirty PTEs also exist for copy-on-write (COW) pages. These two cases are handled differently for page faults. Introduce VM_SHSTK to track shadow stack VMAs.

---
 arch/x86/mm/mmap.c | 2 ++
 fs/proc/task_mmu.c | 3 +++
 include/linux/mm.h | 8 ++++++++
 3 files changed, 13 insertions(+)
arch/x86/mm/mmap.c +2 -0
index c90c20904a60..a22c6b6fc607 100644
@@ -165,6 +165,8 @@ unsigned long get_mmap_base(int is_legacy)
 
 const char *arch_vma_name(struct vm_area_struct *vma)
 {
+	if (vma->vm_flags & VM_SHSTK)
+		return "[shadow stack]";
 	return NULL;
 }
 
fs/proc/task_mmu.c +3 -0
index 602e3a52884d..59623dcd92bb 100644
@@ -661,6 +661,9 @@ static void show_smap_vma_flags(struct seq_file *m, struct vm_area_struct *vma)
 		[ilog2(VM_PKEY_BIT4)]	= "",
 #endif
 #endif /* CONFIG_ARCH_HAS_PKEYS */
+#ifdef CONFIG_X86_CET
+		[ilog2(VM_SHSTK)]	= "ss",
+#endif
 	};
 	size_t i;
 
include/linux/mm.h +8 -0
index ecdf8a8cd6ae..7be5f8b874aa 100644
@@ -312,11 +312,13 @@ extern unsigned int kobjsize(const void *objp);
 #define VM_HIGH_ARCH_BIT_2	34	/* bit only usable on 64-bit architectures */
 #define VM_HIGH_ARCH_BIT_3	35	/* bit only usable on 64-bit architectures */
 #define VM_HIGH_ARCH_BIT_4	36	/* bit only usable on 64-bit architectures */
+#define VM_HIGH_ARCH_BIT_5	37	/* bit only usable on 64-bit architectures */
 #define VM_HIGH_ARCH_0	BIT(VM_HIGH_ARCH_BIT_0)
 #define VM_HIGH_ARCH_1	BIT(VM_HIGH_ARCH_BIT_1)
 #define VM_HIGH_ARCH_2	BIT(VM_HIGH_ARCH_BIT_2)
 #define VM_HIGH_ARCH_3	BIT(VM_HIGH_ARCH_BIT_3)
 #define VM_HIGH_ARCH_4	BIT(VM_HIGH_ARCH_BIT_4)
+#define VM_HIGH_ARCH_5	BIT(VM_HIGH_ARCH_BIT_5)
 #endif /* CONFIG_ARCH_USES_HIGH_VMA_FLAGS */
 
 #ifdef CONFIG_ARCH_HAS_PKEYS
@@ -332,6 +334,12 @@ extern unsigned int kobjsize(const void *objp);
 #endif
 #endif /* CONFIG_ARCH_HAS_PKEYS */
 
+#ifdef CONFIG_X86_CET
+# define VM_SHSTK	VM_HIGH_ARCH_5
+#else
+# define VM_SHSTK	VM_NONE
+#endif
+
 #if defined(CONFIG_X86)
 # define VM_PAT		VM_ARCH_1	/* PAT reserves whole VMA at once (x86) */
 #elif defined(CONFIG_PPC)
Signature · 1 line
2.21.0
#27 lore raw

PATCH v18 13/25 x86/mm: Shadow Stack page fault error checking

In reply to Yu-cheng Yu

Shadow stack accesses are those that are performed by the CPU where it expects to encounter a shadow stack mapping. These accesses are performed implicitly by CALL/RET at the site of the shadow stack pointer. These accesses are made explicitly by shadow stack management instructions like WRUSSQ.

Shadow stacks accesses to shadow-stack mapping can see faults in normal, valid operation just like regular accesses to regular mappings. Shadow stacks need some of the same features like delayed allocation, swap and copy-on-write.

Shadow stack accesses can also result in errors, such as when a shadow stack overflows, or if a shadow stack access occurs to a non-shadow-stack mapping.

In handling a shadow stack page fault, verify it occurs within a shadow stack mapping. It is always an error otherwise. For valid shadow stack accesses, set FAULT_FLAG_WRITE to effect copy-on-write. Because clearing _PAGE_DIRTY (vs. _PAGE_RW) is used to trigger the fault, shadow stack read fault and shadow stack write fault are not differentiated and both are handled as a write access.

---
 arch/x86/include/asm/trap_pf.h |  2 ++
 arch/x86/mm/fault.c            | 19 +++++++++++++++++++
 2 files changed, 21 insertions(+)
arch/x86/include/asm/trap_pf.h +2 -0
index 10b1de500ab1..afa524325e55 100644
@@ -11,6 +11,7 @@
  *   bit 3 ==				1: use of reserved bit detected
  *   bit 4 ==				1: fault was an instruction fetch
  *   bit 5 ==				1: protection keys block access
+ *   bit 6 ==				1: shadow stack access fault
  *   bit 15 ==				1: SGX MMU page-fault
  */
 enum x86_pf_error_code {
@@ -20,6 +21,7 @@ enum x86_pf_error_code {
 	X86_PF_RSVD	=		1 << 3,
 	X86_PF_INSTR	=		1 << 4,
 	X86_PF_PK	=		1 << 5,
+	X86_PF_SHSTK	=		1 << 6,
 	X86_PF_SGX	=		1 << 15,
 };
 
arch/x86/mm/fault.c +19 -0
index f1f1b5a0956a..4cfb8c474a82 100644
@@ -1131,6 +1131,17 @@ access_error(unsigned long error_code, struct vm_area_struct *vma)
 				       (error_code & X86_PF_INSTR), foreign))
 		return 1;
 
+	/*
+	 * Verify a shadow stack access is within a shadow stack VMA.
+	 * It is always an error otherwise.  Normal data access to a
+	 * shadow stack area is checked in the case followed.
+	 */
+	if (error_code & X86_PF_SHSTK) {
+		if (!(vma->vm_flags & VM_SHSTK))
+			return 1;
+		return 0;
+	}
+
 	if (error_code & X86_PF_WRITE) {
 		/* write, present and write, not present: */
 		if (unlikely(!(vma->vm_flags & VM_WRITE)))
@@ -1296,6 +1307,14 @@ void do_user_addr_fault(struct pt_regs *regs,
 
 	perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS, 1, regs, address);
 
+	/*
+	 * Clearing _PAGE_DIRTY is used to detect shadow stack access.
+	 * This method cannot distinguish shadow stack read vs. write.
+	 * For valid shadow stack accesses, set FAULT_FLAG_WRITE to effect
+	 * copy-on-write.
+	 */
+	if (hw_error_code & X86_PF_SHSTK)
+		flags |= FAULT_FLAG_WRITE;
 	if (hw_error_code & X86_PF_WRITE)
 		flags |= FAULT_FLAG_WRITE;
 	if (hw_error_code & X86_PF_INSTR)
Signature · 1 line
2.21.0
#28 lore raw

PATCH v18 14/25 x86/mm: Update maybe_mkwrite() for shadow stack

In reply to Yu-cheng Yu

When serving a page fault, maybe_mkwrite() makes a PTE writable if its vma has VM_WRITE.

A shadow stack vma has VM_SHSTK. Its PTEs have _PAGE_DIRTY, but not _PAGE_WRITE. In fork(), _PAGE_DIRTY is cleared to effect copy-on-write, and in page fault, _PAGE_DIRTY is restored and the shadow stack page is writable again.

Update maybe_mkwrite() by introducing arch_maybe_mkwrite(), which sets _PAGE_DIRTY for a shadow stack PTE.

Apply the same changes to maybe_pmd_mkwrite().

---
 arch/x86/Kconfig        |  4 ++++
 arch/x86/mm/pgtable.c   | 18 ++++++++++++++++++
 include/linux/mm.h      |  2 ++
 include/linux/pgtable.h | 24 ++++++++++++++++++++++++
 mm/huge_memory.c        |  2 ++
 5 files changed, 50 insertions(+)
arch/x86/Kconfig +4 -0
index 2d080a2335df..1204a6dcc0da 100644
@@ -1954,6 +1954,9 @@ config X86_SGX
 config ARCH_HAS_SHADOW_STACK
 	def_bool n
 
+config ARCH_MAYBE_MKWRITE
+	def_bool n
+
 config X86_CET
 	prompt "Intel Control-flow protection for user-mode"
 	def_bool n
@@ -1961,6 +1964,7 @@ config X86_CET
 	depends on AS_WRUSS
 	select ARCH_USES_HIGH_VMA_FLAGS
 	select ARCH_HAS_SHADOW_STACK
+	select ARCH_MAYBE_MKWRITE
 	help
 	  Control-flow protection is a hardware security hardening feature
 	  that detects function-return address or jump target changes by
arch/x86/mm/pgtable.c +18 -0
index f6a9e2e36642..0f4fbf51a9fc 100644
@@ -610,6 +610,24 @@ int pmdp_clear_flush_young(struct vm_area_struct *vma,
 }
 #endif
 
+#ifdef CONFIG_ARCH_MAYBE_MKWRITE
+pte_t arch_maybe_mkwrite(pte_t pte, struct vm_area_struct *vma)
+{
+	if (likely(vma->vm_flags & VM_SHSTK))
+		pte = pte_mkwrite_shstk(pte);
+	return pte;
+}
+
+#ifdef CONFIG_TRANSPARENT_HUGEPAGE
+pmd_t arch_maybe_pmd_mkwrite(pmd_t pmd, struct vm_area_struct *vma)
+{
+	if (likely(vma->vm_flags & VM_SHSTK))
+		pmd = pmd_mkwrite_shstk(pmd);
+	return pmd;
+}
+#endif /* CONFIG_TRANSPARENT_HUGEPAGE */
+#endif /* CONFIG_ARCH_MAYBE_MKWRITE */
+
 /**
  * reserve_top_address - reserves a hole in the top of kernel address space
  * @reserve - size of hole to reserve
include/linux/mm.h +2 -0
index 7be5f8b874aa..abd756e426fc 100644
@@ -993,6 +993,8 @@ static inline pte_t maybe_mkwrite(pte_t pte, struct vm_area_struct *vma)
 {
 	if (likely(vma->vm_flags & VM_WRITE))
 		pte = pte_mkwrite(pte);
+	else
+		pte = arch_maybe_mkwrite(pte, vma);
 	return pte;
 }
 
include/linux/pgtable.h +24 -0
index 8fcdfa52eb4b..d8452218d09b 100644
@@ -1439,6 +1439,30 @@ static inline bool arch_has_pfn_modify_check(void)
 }
 #endif /* !_HAVE_ARCH_PFN_MODIFY_ALLOWED */
 
+#ifdef CONFIG_MMU
+#ifdef CONFIG_ARCH_MAYBE_MKWRITE
+pte_t arch_maybe_mkwrite(pte_t pte, struct vm_area_struct *vma);
+
+#ifdef CONFIG_TRANSPARENT_HUGEPAGE
+pmd_t arch_maybe_pmd_mkwrite(pmd_t pmd, struct vm_area_struct *vma);
+#endif /* CONFIG_TRANSPARENT_HUGEPAGE */
+
+#else /* !CONFIG_ARCH_MAYBE_MKWRITE */
+static inline pte_t arch_maybe_mkwrite(pte_t pte, struct vm_area_struct *vma)
+{
+	return pte;
+}
+
+#ifdef CONFIG_TRANSPARENT_HUGEPAGE
+static inline pmd_t arch_maybe_pmd_mkwrite(pmd_t pmd, struct vm_area_struct *vma)
+{
+	return pmd;
+}
+#endif /* CONFIG_TRANSPARENT_HUGEPAGE */
+
+#endif /* CONFIG_ARCH_MAYBE_MKWRITE */
+#endif /* CONFIG_MMU */
+
 /*
  * Architecture PAGE_KERNEL_* fallbacks
  *
mm/huge_memory.c +2 -0
index 9237976abe72..bfec65c9308b 100644
@@ -478,6 +478,8 @@ pmd_t maybe_pmd_mkwrite(pmd_t pmd, struct vm_area_struct *vma)
 {
 	if (likely(vma->vm_flags & VM_WRITE))
 		pmd = pmd_mkwrite(pmd);
+	else
+		pmd = arch_maybe_pmd_mkwrite(pmd, vma);
 	return pmd;
 }
 
Signature · 1 line
2.21.0
#29 lore raw

PATCH v18 15/25 mm: Fixup places that call pte_mkwrite() directly

In reply to Yu-cheng Yu

When serving a page fault, maybe_mkwrite() makes a PTE writable if it is in a writable vma. A shadow stack vma is writable, but its PTEs need _PAGE_DIRTY to be set to become writable. For this reason, maybe_mkwrite() has been updated.

There are a few places that call pte_mkwrite() directly, but effect the same result as from maybe_mkwrite(). These sites need to be updated for shadow stack as well. Thus, change them to maybe_mkwrite():

- do_anonymous_page() and migrate_vma_insert_page() check VM_WRITE directly and call pte_mkwrite(), which is the same as maybe_mkwrite(). Change them to maybe_mkwrite().

- In do_numa_page(), if the numa entry 'was-writable', then pte_mkwrite() is called directly. Fix it by doing maybe_mkwrite().

- In change_pte_range(), pte_mkwrite() is called directly. Replace it with maybe_mkwrite().

A shadow stack vma is writable but has different vma
flags, and handled accordingly in maybe_mkwrite().

---
 mm/memory.c   | 5 ++---
 mm/migrate.c  | 3 +--
 mm/mprotect.c | 2 +-
 3 files changed, 4 insertions(+), 6 deletions(-)
mm/memory.c +2 -3
index feff48e1465a..1de649c61013 100644
@@ -3549,8 +3549,7 @@ static vm_fault_t do_anonymous_page(struct vm_fault *vmf)
 
 	entry = mk_pte(page, vma->vm_page_prot);
 	entry = pte_sw_mkyoung(entry);
-	if (vma->vm_flags & VM_WRITE)
-		entry = pte_mkwrite(pte_mkdirty(entry));
+	entry = maybe_mkwrite(pte_mkdirty(entry), vma);
 
 	vmf->pte = pte_offset_map_lock(vma->vm_mm, vmf->pmd, vmf->address,
 			&vmf->ptl);
@@ -4205,7 +4204,7 @@ static vm_fault_t do_numa_page(struct vm_fault *vmf)
 	pte = pte_modify(old_pte, vma->vm_page_prot);
 	pte = pte_mkyoung(pte);
 	if (was_writable)
-		pte = pte_mkwrite(pte);
+		pte = maybe_mkwrite(pte, vma);
 	ptep_modify_prot_commit(vma, vmf->address, vmf->pte, old_pte, pte);
 	update_mmu_cache(vma, vmf->address, vmf->pte);
 
mm/migrate.c +1 -2
index c0efe921bca5..8878d75c0db7 100644
@@ -2964,8 +2964,7 @@ static void migrate_vma_insert_page(struct migrate_vma *migrate,
 		}
 	} else {
 		entry = mk_pte(page, vma->vm_page_prot);
-		if (vma->vm_flags & VM_WRITE)
-			entry = pte_mkwrite(pte_mkdirty(entry));
+		entry = maybe_mkwrite(pte_mkdirty(entry), vma);
 	}
 
 	ptep = pte_offset_map_lock(mm, pmdp, addr, &ptl);
mm/mprotect.c +1 -1
index ab709023e9aa..ed26e675c423 100644
@@ -135,7 +135,7 @@ static unsigned long change_pte_range(struct vm_area_struct *vma, pmd_t *pmd,
 			if (dirty_accountable && pte_dirty(ptent) &&
 					(pte_soft_dirty(ptent) ||
 					 !(vma->vm_flags & VM_SOFTDIRTY))) {
-				ptent = pte_mkwrite(ptent);
+				ptent = maybe_mkwrite(ptent, vma);
 			}
 			ptep_modify_prot_commit(vma, addr, pte, oldpte, ptent);
 			pages++;
Signature · 1 line
2.21.0
#30 lore raw

PATCH v18 16/25 mm: Add guard pages around a shadow stack.

In reply to Yu-cheng Yu

INCSSP(Q/D) increments shadow stack pointer and 'pops and discards' the first and the last elements in the range, effectively touches those memory areas.

The maximum moving distance by INCSSPQ is 255 * 8 = 2040 bytes and 255 * 4 = 1020 bytes by INCSSPD. Both ranges are far from PAGE_SIZE. Thus, putting a gap page on both ends of a shadow stack prevents INCSSP, CALL, and RET from going beyond.

---
 arch/x86/include/asm/page_64_types.h | 10 ++++++++++
 include/linux/mm.h                   | 24 ++++++++++++++++++++----
 2 files changed, 30 insertions(+), 4 deletions(-)
arch/x86/include/asm/page_64_types.h +10 -0
index 645bd1d0ee07..fda4c023e009 100644
@@ -115,4 +115,14 @@
 #define KERNEL_IMAGE_SIZE	(512 * 1024 * 1024)
 #endif
 
+/*
+ * Shadow stack pointer is moved by CALL, RET, and INCSSP(Q/D).  INCSSPQ
+ * moves shadow stack pointer up to 255 * 8 = ~2 KB (~1KB for INCSSPD) and
+ * touches the first and the last element in the range, which triggers a
+ * page fault if the range is not in a shadow stack.  Because of this,
+ * creating 4-KB guard pages around a shadow stack prevents these
+ * instructions from going beyond.
+ */
+#define ARCH_SHADOW_STACK_GUARD_GAP PAGE_SIZE
+
 #endif /* _ASM_X86_PAGE_64_DEFS_H */
include/linux/mm.h +20 -4
index abd756e426fc..c12b3d36dbd3 100644
@@ -2640,6 +2640,10 @@ extern vm_fault_t filemap_page_mkwrite(struct vm_fault *vmf);
 int __must_check write_one_page(struct page *page);
 void task_dirty_inc(struct task_struct *tsk);
 
+#ifndef ARCH_SHADOW_STACK_GUARD_GAP
+#define ARCH_SHADOW_STACK_GUARD_GAP 0
+#endif
+
 extern unsigned long stack_guard_gap;
 /* Generic expand stack which grows the stack according to GROWS{UP,DOWN} */
 extern int expand_stack(struct vm_area_struct *vma, unsigned long address);
@@ -2672,9 +2676,15 @@ static inline struct vm_area_struct * find_vma_intersection(struct mm_struct * m
 static inline unsigned long vm_start_gap(struct vm_area_struct *vma)
 {
 	unsigned long vm_start = vma->vm_start;
+	unsigned long gap = 0;
 
-	if (vma->vm_flags & VM_GROWSDOWN) {
-		vm_start -= stack_guard_gap;
+	if (vma->vm_flags & VM_GROWSDOWN)
+		gap = stack_guard_gap;
+	else if (vma->vm_flags & VM_SHSTK)
+		gap = ARCH_SHADOW_STACK_GUARD_GAP;
+
+	if (gap != 0) {
+		vm_start -= gap;
 		if (vm_start > vma->vm_start)
 			vm_start = 0;
 	}
@@ -2684,9 +2694,15 @@ static inline unsigned long vm_start_gap(struct vm_area_struct *vma)
 static inline unsigned long vm_end_gap(struct vm_area_struct *vma)
 {
 	unsigned long vm_end = vma->vm_end;
+	unsigned long gap = 0;
+
+	if (vma->vm_flags & VM_GROWSUP)
+		gap = stack_guard_gap;
+	else if (vma->vm_flags & VM_SHSTK)
+		gap = ARCH_SHADOW_STACK_GUARD_GAP;
 
-	if (vma->vm_flags & VM_GROWSUP) {
-		vm_end += stack_guard_gap;
+	if (gap != 0) {
+		vm_end += gap;
 		if (vm_end < vma->vm_end)
 			vm_end = -PAGE_SIZE;
 	}
Signature · 1 line
2.21.0
#31 lore raw

PATCH v18 17/25 mm/mmap: Add shadow stack pages to memory accounting

In reply to Yu-cheng Yu

Account shadow stack pages to stack memory.

---
 arch/x86/mm/pgtable.c   |  7 +++++++
 include/linux/pgtable.h | 11 +++++++++++
 mm/mmap.c               |  5 +++++
 3 files changed, 23 insertions(+)
arch/x86/mm/pgtable.c +7 -0
index 0f4fbf51a9fc..948d28c29964 100644
@@ -895,3 +895,10 @@ int pmd_free_pte_page(pmd_t *pmd, unsigned long addr)
 
 #endif /* CONFIG_X86_64 */
 #endif	/* CONFIG_HAVE_ARCH_HUGE_VMAP */
+
+#ifdef CONFIG_ARCH_HAS_SHADOW_STACK
+bool arch_shadow_stack_mapping(vm_flags_t vm_flags)
+{
+	return (vm_flags & VM_SHSTK);
+}
+#endif
include/linux/pgtable.h +11 -0
index d8452218d09b..b888b246b8b1 100644
@@ -1463,6 +1463,17 @@ static inline pmd_t arch_maybe_pmd_mkwrite(pmd_t pmd, struct vm_area_struct *vma
 #endif /* CONFIG_ARCH_MAYBE_MKWRITE */
 #endif /* CONFIG_MMU */
 
+#ifdef CONFIG_MMU
+#ifdef CONFIG_ARCH_HAS_SHADOW_STACK
+bool arch_shadow_stack_mapping(vm_flags_t vm_flags);
+#else
+static inline bool arch_shadow_stack_mapping(vm_flags_t vm_flags)
+{
+	return false;
+}
+#endif /* CONFIG_ARCH_HAS_SHADOW_STACK */
+#endif /* CONFIG_MMU */
+
 /*
  * Architecture PAGE_KERNEL_* fallbacks
  *
mm/mmap.c +5 -0
index dc7206032387..51200b821898 100644
@@ -1720,6 +1720,9 @@ static inline int accountable_mapping(struct file *file, vm_flags_t vm_flags)
 	if (file && is_file_hugepages(file))
 		return 0;
 
+	if (arch_shadow_stack_mapping(vm_flags))
+		return 1;
+
 	return (vm_flags & (VM_NORESERVE | VM_SHARED | VM_WRITE)) == VM_WRITE;
 }
 
@@ -3389,6 +3392,8 @@ void vm_stat_account(struct mm_struct *mm, vm_flags_t flags, long npages)
 		mm->stack_vm += npages;
 	else if (is_data_mapping(flags))
 		mm->data_vm += npages;
+	else if (arch_shadow_stack_mapping(flags))
+		mm->stack_vm += npages;
 }
 
 static vm_fault_t special_mapping_fault(struct vm_fault *vmf);
Signature · 1 line
2.21.0
#32 lore raw

PATCH v18 18/25 mm: Update can_follow_write_pte() for shadow stack

In reply to Yu-cheng Yu

Can_follow_write_pte() ensures a read-only page is COWed by checking the FOLL_COW flag, and uses pte_dirty() to validate the flag is still valid.

Like a writable data page, a shadow stack page is writable, and becomes read-only during copy-on-write, but it is always dirty. Thus, in the can_follow_write_pte() check, it belongs to the writable page case and should be excluded from the read-only page pte_dirty() check. Apply the same changes to can_follow_write_pmd().

---
 mm/gup.c         | 8 +++++---
 mm/huge_memory.c | 8 +++++---
 2 files changed, 10 insertions(+), 6 deletions(-)
mm/gup.c +5 -3
index e4c224cd9661..66ab67626f57 100644
@@ -357,10 +357,12 @@ static int follow_pfn_pte(struct vm_area_struct *vma, unsigned long address,
  * FOLL_FORCE can write to even unwritable pte's, but only
  * after we've gone through a COW cycle and they are dirty.
  */
-static inline bool can_follow_write_pte(pte_t pte, unsigned int flags)
+static inline bool can_follow_write_pte(pte_t pte, unsigned int flags,
+					struct vm_area_struct *vma)
 {
 	return pte_write(pte) ||
-		((flags & FOLL_FORCE) && (flags & FOLL_COW) && pte_dirty(pte));
+		((flags & FOLL_FORCE) && (flags & FOLL_COW) && pte_dirty(pte) &&
+				  !arch_shadow_stack_mapping(vma->vm_flags));
 }
 
 static struct page *follow_page_pte(struct vm_area_struct *vma,
@@ -403,7 +405,7 @@ static struct page *follow_page_pte(struct vm_area_struct *vma,
 	}
 	if ((flags & FOLL_NUMA) && pte_protnone(pte))
 		goto no_page;
-	if ((flags & FOLL_WRITE) && !can_follow_write_pte(pte, flags)) {
+	if ((flags & FOLL_WRITE) && !can_follow_write_pte(pte, flags, vma)) {
 		pte_unmap_unlock(ptep, ptl);
 		return NULL;
 	}
mm/huge_memory.c +5 -3
index bfec65c9308b..eb64e2b56bc9 100644
@@ -1337,10 +1337,12 @@ vm_fault_t do_huge_pmd_wp_page(struct vm_fault *vmf, pmd_t orig_pmd)
  * FOLL_FORCE can write to even unwritable pmd's, but only
  * after we've gone through a COW cycle and they are dirty.
  */
-static inline bool can_follow_write_pmd(pmd_t pmd, unsigned int flags)
+static inline bool can_follow_write_pmd(pmd_t pmd, unsigned int flags,
+					struct vm_area_struct *vma)
 {
 	return pmd_write(pmd) ||
-	       ((flags & FOLL_FORCE) && (flags & FOLL_COW) && pmd_dirty(pmd));
+	       ((flags & FOLL_FORCE) && (flags & FOLL_COW) && pmd_dirty(pmd) &&
+				  !arch_shadow_stack_mapping(vma->vm_flags));
 }
 
 struct page *follow_trans_huge_pmd(struct vm_area_struct *vma,
@@ -1353,7 +1355,7 @@ struct page *follow_trans_huge_pmd(struct vm_area_struct *vma,
 
 	assert_spin_locked(pmd_lockptr(mm, pmd));
 
-	if (flags & FOLL_WRITE && !can_follow_write_pmd(*pmd, flags))
+	if (flags & FOLL_WRITE && !can_follow_write_pmd(*pmd, flags, vma))
 		goto out;
 
 	/* Avoid dumping huge zero page */
Signature · 1 line
2.21.0
#33 lore raw

PATCH v18 19/25 mm: Re-introduce vm_flags to do_mmap()

In reply to Yu-cheng Yu

There was no more caller passing vm_flags to do_mmap(), and vm_flags was removed from the function's input by:

commit 45e55300f114 ("mm: remove unnecessary wrapper function do_mmap_pgoff()").

There is a new user now. Shadow stack allocation passes VM_SHSTK to do_mmap(). Re-introduce vm_flags to do_mmap(), but without the old wrapper do_mmap_pgoff(). Instead, make all callers of the wrapper pass a zero vm_flags to do_mmap().

---
 fs/aio.c           |  2 +-
 include/linux/mm.h |  3 ++-
 ipc/shm.c          |  2 +-
 mm/mmap.c          | 10 +++++-----
 mm/nommu.c         |  4 ++--
 mm/util.c          |  2 +-
 6 files changed, 12 insertions(+), 11 deletions(-)
fs/aio.c +1 -1
index 1f32da13d39e..b5d0586209a7 100644
@@ -529,7 +529,7 @@ static int aio_setup_ring(struct kioctx *ctx, unsigned int nr_events)
 
 	ctx->mmap_base = do_mmap(ctx->aio_ring_file, 0, ctx->mmap_size,
 				 PROT_READ | PROT_WRITE,
-				 MAP_SHARED, 0, &unused, NULL);
+				 MAP_SHARED, 0, 0, &unused, NULL);
 	mmap_write_unlock(mm);
 	if (IS_ERR((void *)ctx->mmap_base)) {
 		ctx->mmap_size = 0;
include/linux/mm.h +2 -1
index c12b3d36dbd3..06e9899e13b8 100644
@@ -2585,7 +2585,8 @@ extern unsigned long mmap_region(struct file *file, unsigned long addr,
 	struct list_head *uf);
 extern unsigned long do_mmap(struct file *file, unsigned long addr,
 	unsigned long len, unsigned long prot, unsigned long flags,
-	unsigned long pgoff, unsigned long *populate, struct list_head *uf);
+	vm_flags_t vm_flags, unsigned long pgoff, unsigned long *populate,
+	struct list_head *uf);
 extern int __do_munmap(struct mm_struct *, unsigned long, size_t,
 		       struct list_head *uf, bool downgrade);
 extern int do_munmap(struct mm_struct *, unsigned long, size_t,
ipc/shm.c +1 -1
index febd88daba8c..b6370eb1eaab 100644
@@ -1556,7 +1556,7 @@ long do_shmat(int shmid, char __user *shmaddr, int shmflg,
 			goto invalid;
 	}
 
-	addr = do_mmap(file, addr, size, prot, flags, 0, &populate, NULL);
+	addr = do_mmap(file, addr, size, prot, flags, 0, 0, &populate, NULL);
 	*raddr = addr;
 	err = 0;
 	if (IS_ERR_VALUE(addr))
mm/mmap.c +5 -5
index 51200b821898..95ce7cd68654 100644
@@ -1403,11 +1403,11 @@ static inline bool file_mmap_ok(struct file *file, struct inode *inode,
  */
 unsigned long do_mmap(struct file *file, unsigned long addr,
 			unsigned long len, unsigned long prot,
-			unsigned long flags, unsigned long pgoff,
-			unsigned long *populate, struct list_head *uf)
+			unsigned long flags, vm_flags_t vm_flags,
+			unsigned long pgoff, unsigned long *populate,
+			struct list_head *uf)
 {
 	struct mm_struct *mm = current->mm;
-	vm_flags_t vm_flags;
 	int pkey = 0;
 
 	*populate = 0;
@@ -1469,7 +1469,7 @@ unsigned long do_mmap(struct file *file, unsigned long addr,
 	 * to. we assume access permissions have been handled by the open
 	 * of the memory object, so we don't do any here.
 	 */
-	vm_flags = calc_vm_prot_bits(prot, pkey) | calc_vm_flag_bits(flags) |
+	vm_flags |= calc_vm_prot_bits(prot, pkey) | calc_vm_flag_bits(flags) |
 			mm->def_flags | VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC;
 
 	if (flags & MAP_LOCKED)
@@ -3049,7 +3049,7 @@ SYSCALL_DEFINE5(remap_file_pages, unsigned long, start, unsigned long, size,
 
 	file = get_file(vma->vm_file);
 	ret = do_mmap(vma->vm_file, start, size,
-			prot, flags, pgoff, &populate, NULL);
+			prot, flags, 0, pgoff, &populate, NULL);
 	fput(file);
 out:
 	mmap_write_unlock(mm);
mm/nommu.c +2 -2
index 870fea12823e..dbfa8e50d2db 100644
@@ -1071,6 +1071,7 @@ unsigned long do_mmap(struct file *file,
 			unsigned long len,
 			unsigned long prot,
 			unsigned long flags,
+			vm_flags_t vm_flags,
 			unsigned long pgoff,
 			unsigned long *populate,
 			struct list_head *uf)
@@ -1078,7 +1079,6 @@ unsigned long do_mmap(struct file *file,
 	struct vm_area_struct *vma;
 	struct vm_region *region;
 	struct rb_node *rb;
-	vm_flags_t vm_flags;
 	unsigned long capabilities, result;
 	int ret;
 
@@ -1097,7 +1097,7 @@ unsigned long do_mmap(struct file *file,
 
 	/* we've determined that we can make the mapping, now translate what we
 	 * now know into VMA flags */
-	vm_flags = determine_vm_flags(file, prot, flags, capabilities);
+	vm_flags |= determine_vm_flags(file, prot, flags, capabilities);
 
 	/* we're going to need to record the mapping */
 	region = kmem_cache_zalloc(vm_region_jar, GFP_KERNEL);
mm/util.c +1 -1
index 8c9b7d1e7c49..0f7ab91e672b 100644
@@ -516,7 +516,7 @@ unsigned long vm_mmap_pgoff(struct file *file, unsigned long addr,
 	if (!ret) {
 		if (mmap_write_lock_killable(mm))
 			return -EINTR;
-		ret = do_mmap(file, addr, len, prot, flag, pgoff, &populate,
+		ret = do_mmap(file, addr, len, prot, flag, 0, pgoff, &populate,
 			      &uf);
 		mmap_write_unlock(mm);
 		userfaultfd_unmap_complete(mm, &uf);
Signature · 1 line
2.21.0
#34 lore raw

PATCH v18 20/25 x86/cet/shstk: User-mode shadow stack support

In reply to Yu-cheng Yu

Introduce basic shadow stack enabling/disabling/allocation routines. A task's shadow stack is allocated from memory with VM_SHSTK flag and has a fixed size of min(RLIMIT_STACK, 4GB).

---
 arch/x86/include/asm/cet.h       |  28 ++++++
 arch/x86/include/asm/processor.h |   5 ++
 arch/x86/kernel/Makefile         |   2 +
 arch/x86/kernel/cet.c            | 147 +++++++++++++++++++++++++++++++
 4 files changed, 182 insertions(+)
 create mode 100644 arch/x86/include/asm/cet.h
 create mode 100644 arch/x86/kernel/cet.c
arch/x86/include/asm/cet.h new file +28 -0
new file mode 100644
index 000000000000..5750fbcbb952
@@ -0,0 +1,28 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _ASM_X86_CET_H
+#define _ASM_X86_CET_H
+
+#ifndef __ASSEMBLY__
+#include <linux/types.h>
+
+struct task_struct;
+/*
+ * Per-thread CET status
+ */
+struct cet_status {
+	unsigned long	shstk_base;
+	unsigned long	shstk_size;
+};
+
+#ifdef CONFIG_X86_CET
+int cet_setup_shstk(void);
+void cet_disable_shstk(void);
+void cet_free_shstk(struct task_struct *p);
+#else
+static inline void cet_disable_shstk(void) {}
+static inline void cet_free_shstk(struct task_struct *p) {}
+#endif
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* _ASM_X86_CET_H */
arch/x86/include/asm/processor.h +5 -0
index c20a52b5534b..51158c6beb4f 100644
@@ -27,6 +27,7 @@ struct vm86;
 #include <asm/unwind_hints.h>
 #include <asm/vmxfeatures.h>
 #include <asm/vdso/processor.h>
+#include <asm/cet.h>
 
 #include <linux/personality.h>
 #include <linux/cache.h>
@@ -536,6 +537,10 @@ struct thread_struct {
 
 	unsigned int		sig_on_uaccess_err:1;
 
+#ifdef CONFIG_X86_CET
+	struct cet_status	cet;
+#endif
+
 	/* Floating point and extended processor state */
 	struct fpu		fpu;
 	/*
arch/x86/kernel/Makefile +2 -0
index 5eeb808eb024..4a9a7e7d00dc 100644
@@ -151,6 +151,8 @@ obj-$(CONFIG_UNWINDER_FRAME_POINTER)	+= unwind_frame.o
 obj-$(CONFIG_UNWINDER_GUESS)		+= unwind_guess.o
 
 obj-$(CONFIG_AMD_MEM_ENCRYPT)		+= sev-es.o
+obj-$(CONFIG_X86_CET)			+= cet.o
+
 ###
 # 64 bit specific files
 ifeq ($(CONFIG_X86_64),y)
arch/x86/kernel/cet.c new file +147 -0

147 lines not on this page · raw message

Signature · 1 line
2.21.0
#35 lore raw

PATCH v18 21/25 x86/cet/shstk: Handle signals for shadow stack

In reply to Yu-cheng Yu

To deliver a signal, create a shadow stack restore token and put a restore token and the signal restorer address on the shadow stack. For sigreturn, verify the token and restore the shadow stack pointer.

Introduce WRUSS, which is a kernel-mode instruction but writes directly to user shadow stack. It is used to construct the user signal stack as described above.

Introduce a signal context extension struct 'sc_ext', which is used to save shadow stack restore token address and WAIT_ENDBR status. WAIT_ENDBR will be introduced later in the Indirect Branch Tracking (IBT) series, but add that into sc_ext now to keep the struct stable in case the IBT series is applied later.

---
 arch/x86/ia32/ia32_signal.c            |  17 +++
 arch/x86/include/asm/cet.h             |   8 ++
 arch/x86/include/asm/fpu/internal.h    |  10 ++
 arch/x86/include/asm/special_insns.h   |  32 ++++++
 arch/x86/include/uapi/asm/sigcontext.h |   9 ++
 arch/x86/kernel/cet.c                  | 152 +++++++++++++++++++++++++
 arch/x86/kernel/fpu/signal.c           | 100 ++++++++++++++++
 arch/x86/kernel/signal.c               |  10 ++
 8 files changed, 338 insertions(+)
arch/x86/ia32/ia32_signal.c +17 -0
index 5e3d9b7fd5fb..377ae8de511f 100644
@@ -35,6 +35,7 @@
 #include <asm/sigframe.h>
 #include <asm/sighandling.h>
 #include <asm/smap.h>
+#include <asm/cet.h>
 
 static inline void reload_segments(struct sigcontext_32 *sc)
 {
@@ -205,6 +206,7 @@ static void __user *get_sigframe(struct ksignal *ksig, struct pt_regs *regs,
 				 void __user **fpstate)
 {
 	unsigned long sp, fx_aligned, math_size;
+	void __user *restorer = NULL;
 
 	/* Default to using normal stack */
 	sp = regs->sp;
@@ -218,8 +220,23 @@ static void __user *get_sigframe(struct ksignal *ksig, struct pt_regs *regs,
 		 ksig->ka.sa.sa_restorer)
 		sp = (unsigned long) ksig->ka.sa.sa_restorer;
 
+	if (ksig->ka.sa.sa_flags & SA_RESTORER) {
+		restorer = ksig->ka.sa.sa_restorer;
+	} else if (current->mm->context.vdso) {
+		if (ksig->ka.sa.sa_flags & SA_SIGINFO)
+			restorer = current->mm->context.vdso +
+				vdso_image_32.sym___kernel_rt_sigreturn;
+		else
+			restorer = current->mm->context.vdso +
+				vdso_image_32.sym___kernel_sigreturn;
+	}
+
 	sp = fpu__alloc_mathframe(sp, 1, &fx_aligned, &math_size);
 	*fpstate = (struct _fpstate_32 __user *) sp;
+
+	if (save_cet_to_sigframe(1, *fpstate, (unsigned long)restorer))
+		return (void __user *) -1L;
+
 	if (copy_fpstate_to_sigframe(*fpstate, (void __user *)fx_aligned,
 				     math_size) < 0)
 		return (void __user *) -1L;
arch/x86/include/asm/cet.h +8 -0
index 5750fbcbb952..73435856ce54 100644
@@ -6,6 +6,8 @@
 #include <linux/types.h>
 
 struct task_struct;
+struct sc_ext;
+
 /*
  * Per-thread CET status
  */
@@ -18,9 +20,15 @@ struct cet_status {
 int cet_setup_shstk(void);
 void cet_disable_shstk(void);
 void cet_free_shstk(struct task_struct *p);
+int cet_verify_rstor_token(bool ia32, unsigned long ssp, unsigned long *new_ssp);
+void cet_restore_signal(struct sc_ext *sc);
+int cet_setup_signal(bool ia32, unsigned long rstor, struct sc_ext *sc);
 #else
 static inline void cet_disable_shstk(void) {}
 static inline void cet_free_shstk(struct task_struct *p) {}
+static inline void cet_restore_signal(struct sc_ext *sc) { return; }
+static inline int cet_setup_signal(bool ia32, unsigned long rstor,
+				   struct sc_ext *sc) { return -EINVAL; }
 #endif
 
 #endif /* __ASSEMBLY__ */
arch/x86/include/asm/fpu/internal.h +10 -0
index 8d33ad80704f..c1dedec2281b 100644
@@ -443,6 +443,16 @@ static inline void copy_kernel_to_fpregs(union fpregs_state *fpstate)
 	__copy_kernel_to_fpregs(fpstate, -1);
 }
 
+#ifdef CONFIG_X86_CET
+extern int save_cet_to_sigframe(int ia32, void __user *fp,
+				unsigned long restorer);
+#else
+static inline int save_cet_to_sigframe(int ia32, void __user *fp,
+				unsigned long restorer)
+{
+	return 0;
+}
+#endif
 extern int copy_fpstate_to_sigframe(void __user *buf, void __user *fp, int size);
 
 /*
arch/x86/include/asm/special_insns.h +32 -0
index cc177b4431ae..d979d0deb3ae 100644
@@ -234,6 +234,38 @@ static inline void clwb(volatile void *__p)
 		: [pax] "a" (p));
 }
 
+#ifdef CONFIG_X86_CET
+#if defined(CONFIG_IA32_EMULATION) || defined(CONFIG_X86_X32)
+static inline int write_user_shstk_32(unsigned long addr, unsigned int val)
+{
+	asm_volatile_goto("1: wrussd %1, (%0)\n"
+			  _ASM_EXTABLE(1b, %l[fail])
+			  :: "r" (addr), "r" (val)
+			  :: fail);
+	return 0;
+fail:
+	return -EPERM;
+}
+#else
+static inline int write_user_shstk_32(unsigned long addr, unsigned int val)
+{
+	WARN_ONCE(1, "%s used but not supported.\n", __func__);
+	return -EFAULT;
+}
+#endif
+
+static inline int write_user_shstk_64(unsigned long addr, unsigned long val)
+{
+	asm_volatile_goto("1: wrussq %1, (%0)\n"
+			  _ASM_EXTABLE(1b, %l[fail])
+			  :: "r" (addr), "r" (val)
+			  :: fail);
+	return 0;
+fail:
+	return -EPERM;
+}
+#endif /* CONFIG_X86_CET */
+
 #define nop() asm volatile ("nop")
 
 static inline void serialize(void)
arch/x86/include/uapi/asm/sigcontext.h +9 -0
index 844d60eb1882..cf2d55db3be4 100644
@@ -196,6 +196,15 @@ struct _xstate {
 	/* New processor state extensions go here: */
 };
 
+/*
+ * Located at the end of sigcontext->fpstate, aligned to 8.
+ */
+struct sc_ext {
+	unsigned long total_size;
+	unsigned long ssp;
+	unsigned long wait_endbr;
+};
+
 /*
  * The 32-bit signal frame:
  */
arch/x86/kernel/cet.c +152 -0

167 lines not on this page · raw message

arch/x86/kernel/fpu/signal.c +100 -0

142 lines not on this page · raw message

arch/x86/kernel/signal.c +10 -0
index ea794a083c44..1807379f1d86 100644
@@ -46,6 +46,7 @@
 #include <asm/syscall.h>
 #include <asm/sigframe.h>
 #include <asm/signal.h>
+#include <asm/cet.h>
 
 #ifdef CONFIG_X86_64
 /*
@@ -239,6 +240,9 @@ get_sigframe(struct k_sigaction *ka, struct pt_regs *regs, size_t frame_size,
 	unsigned long buf_fx = 0;
 	int onsigstack = on_sig_stack(sp);
 	int ret;
+#ifdef CONFIG_X86_64
+	void __user *restorer = NULL;
+#endif
 
 	/* redzone */
 	if (IS_ENABLED(CONFIG_X86_64))
@@ -270,6 +274,12 @@ get_sigframe(struct k_sigaction *ka, struct pt_regs *regs, size_t frame_size,
 	if (onsigstack && !likely(on_sig_stack(sp)))
 		return (void __user *)-1L;
 
+#ifdef CONFIG_X86_64
+	if (ka->sa.sa_flags & SA_RESTORER)
+		restorer = ka->sa.sa_restorer;
+	ret = save_cet_to_sigframe(0, *fpstate, (unsigned long)restorer);
+#endif
+
 	/* save i387 and extended state */
 	ret = copy_fpstate_to_sigframe(*fpstate, (void __user *)buf_fx, math_size);
 	if (ret < 0)
Signature · 1 line
2.21.0
#36 lore raw

Re: [PATCH v18 21/25] x86/cet/shstk: Handle signals for shadow stack

Quoted 8 lines · Yu-cheng Yu

To deliver a signal, create a shadow stack restore token and put a restore token and the signal restorer address on the shadow stack. For sigreturn, verify the token and restore the shadow stack pointer.

Introduce WRUSS, which is a kernel-mode instruction but writes directly to user shadow stack. It is used to construct the user signal stack as described above.

Quoted 5 lines

Introduce a signal context extension struct 'sc_ext', which is used to save shadow stack restore token address and WAIT_ENDBR status. WAIT_ENDBR will be introduced later in the Indirect Branch Tracking (IBT) series, but add that into sc_ext now to keep the struct stable in case the IBT series is applied later.

This changelog needs some work. It's got a lot of "what" and not enough "why".

Why do we need a token?
What function does it serve?
What does it protect against?
Why do we need a signal context extension?

#37 lore raw

Re: [PATCH v18 21/25] x86/cet/shstk: Handle signals for shadow stack

Quoted 15 lines · Dave Hansen
Quoted 8 lines · Yu-cheng Yu

To deliver a signal, create a shadow stack restore token and put a restore token and the signal restorer address on the shadow stack. For sigreturn, verify the token and restore the shadow stack pointer.

Introduce WRUSS, which is a kernel-mode instruction but writes directly to user shadow stack. It is used to construct the user signal stack as described above.

Quoted 5 lines

Introduce a signal context extension struct 'sc_ext', which is used to save shadow stack restore token address and WAIT_ENDBR status. WAIT_ENDBR will be introduced later in the Indirect Branch Tracking (IBT) series, but add that into sc_ext now to keep the struct stable in case the IBT series is applied later.

Quoted 8 lines

This changelog needs some work. It's got a lot of "what" and not enough "why".

Why do we need a token?
What function does it serve?
What does it protect against?
Why do we need a signal context extension?

I will update it.

--
Yu-cheng

#38 lore raw

PATCH v18 22/25 ELF: Introduce arch_setup_elf_property()

In reply to Yu-cheng Yu

An ELF file's .note.gnu.property indicates arch features supported by the file. These features are extracted by arch_parse_elf_property() and stored in 'arch_elf_state'.

Introduce x86 feature definitions and arch_setup_elf_property(), which enables such features. The first use-case of this function is Shadow Stack.

ARM64 is the other arch that has ARCH_USE_GNU_PROPERTY and arch_parse_elf_ property(). Add arch_setup_elf_property() for it.

Cc Mark Brown <[email protected]>
Cc Catalin Marinas <[email protected]>
Cc Dave Martin <[email protected]>
---
 arch/arm64/include/asm/elf.h |  5 +++++
 arch/x86/Kconfig             |  2 ++
 arch/x86/include/asm/elf.h   | 13 +++++++++++++
 arch/x86/kernel/process_64.c | 32 ++++++++++++++++++++++++++++++++
 fs/binfmt_elf.c              |  4 ++++
 include/linux/elf.h          |  6 ++++++
 include/uapi/linux/elf.h     |  9 +++++++++
 7 files changed, 71 insertions(+)
arch/arm64/include/asm/elf.h +5 -0
index 8d1c8dcb87fd..d37bc7915935 100644
@@ -281,6 +281,11 @@ static inline int arch_parse_elf_property(u32 type, const void *data,
 	return 0;
 }
 
+static inline int arch_setup_elf_property(struct arch_elf_state *arch)
+{
+	return 0;
+}
+
 static inline int arch_elf_pt_proc(void *ehdr, void *phdr,
 				   struct file *f, bool is_interp,
 				   struct arch_elf_state *state)
arch/x86/Kconfig +2 -0
index 1204a6dcc0da..aec4c988a5ae 100644
@@ -1965,6 +1965,8 @@ config X86_CET
 	select ARCH_USES_HIGH_VMA_FLAGS
 	select ARCH_HAS_SHADOW_STACK
 	select ARCH_MAYBE_MKWRITE
+	select ARCH_USE_GNU_PROPERTY
+	select ARCH_BINFMT_ELF_STATE
 	help
 	  Control-flow protection is a hardware security hardening feature
 	  that detects function-return address or jump target changes by
arch/x86/include/asm/elf.h +13 -0
index 66bdfe838d61..13701eaa521c 100644
@@ -390,6 +390,19 @@ extern int compat_arch_setup_additional_pages(struct linux_binprm *bprm,
 
 extern bool arch_syscall_is_vdso_sigreturn(struct pt_regs *regs);
 
+#ifdef CONFIG_ARCH_BINFMT_ELF_STATE
+struct arch_elf_state {
+	unsigned int gnu_property;
+};
+
+#define INIT_ARCH_ELF_STATE {	\
+	.gnu_property = 0,	\
+}
+
+#define arch_elf_pt_proc(ehdr, phdr, elf, interp, state) (0)
+#define arch_check_elf(ehdr, interp, interp_ehdr, state) (0)
+#endif
+
 /* Do not change the values. See get_align_mask() */
 enum align_flags {
 	ALIGN_VA_32	= BIT(0),
arch/x86/kernel/process_64.c +32 -0
index ad582f9ac5a6..19f138f7a209 100644
@@ -835,3 +835,35 @@ unsigned long KSTK_ESP(struct task_struct *task)
 {
 	return task_pt_regs(task)->sp;
 }
+
+#ifdef CONFIG_ARCH_USE_GNU_PROPERTY
+int arch_parse_elf_property(u32 type, const void *data, size_t datasz,
+			    bool compat, struct arch_elf_state *state)
+{
+	if (type != GNU_PROPERTY_X86_FEATURE_1_AND)
+		return 0;
+
+	if (datasz != sizeof(unsigned int))
+		return -ENOEXEC;
+
+	state->gnu_property = *(unsigned int *)data;
+	return 0;
+}
+
+int arch_setup_elf_property(struct arch_elf_state *state)
+{
+	int r = 0;
+
+	if (!IS_ENABLED(CONFIG_X86_CET))
+		return r;
+
+	memset(&current->thread.cet, 0, sizeof(struct cet_status));
+
+	if (static_cpu_has(X86_FEATURE_SHSTK)) {
+		if (state->gnu_property & GNU_PROPERTY_X86_FEATURE_1_SHSTK)
+			r = cet_setup_shstk();
+	}
+
+	return r;
+}
+#endif
fs/binfmt_elf.c +4 -0
index 950bc177238a..5d5f6a54a035 100644
@@ -1245,6 +1245,10 @@ static int load_elf_binary(struct linux_binprm *bprm)
 
 	set_binfmt(&elf_format);
 
+	retval = arch_setup_elf_property(&arch_state);
+	if (retval < 0)
+		goto out;
+
 #ifdef ARCH_HAS_SETUP_ADDITIONAL_PAGES
 	retval = ARCH_SETUP_ADDITIONAL_PAGES(bprm, elf_ex, !!interpreter);
 	if (retval < 0)
include/linux/elf.h +6 -0
index c9a46c4e183b..be04d15e937f 100644
@@ -92,9 +92,15 @@ static inline int arch_parse_elf_property(u32 type, const void *data,
 {
 	return 0;
 }
+
+static inline int arch_setup_elf_property(struct arch_elf_state *arch)
+{
+	return 0;
+}
 #else
 extern int arch_parse_elf_property(u32 type, const void *data, size_t datasz,
 				   bool compat, struct arch_elf_state *arch);
+extern int arch_setup_elf_property(struct arch_elf_state *arch);
 #endif
 
 #ifdef CONFIG_ARCH_HAVE_ELF_PROT
include/uapi/linux/elf.h +9 -0
index 30f68b42eeb5..24ba55ba8278 100644
@@ -455,4 +455,13 @@ typedef struct elf64_note {
 /* Bits for GNU_PROPERTY_AARCH64_FEATURE_1_BTI */
 #define GNU_PROPERTY_AARCH64_FEATURE_1_BTI	(1U << 0)
 
+/* .note.gnu.property types for x86: */
+#define GNU_PROPERTY_X86_FEATURE_1_AND		0xc0000002
+
+/* Bits for GNU_PROPERTY_X86_FEATURE_1_AND */
+#define GNU_PROPERTY_X86_FEATURE_1_IBT		0x00000001
+#define GNU_PROPERTY_X86_FEATURE_1_SHSTK	0x00000002
+#define GNU_PROPERTY_X86_FEATURE_1_VALID (GNU_PROPERTY_X86_FEATURE_1_IBT | \
+					   GNU_PROPERTY_X86_FEATURE_1_SHSTK)
+
 #endif /* _UAPI_LINUX_ELF_H */
Signature · 1 line
2.21.0
#39 lore raw

PATCH v18 23/25 x86/cet/shstk: Handle thread shadow stack

In reply to Yu-cheng Yu

The kernel allocates (and frees on thread exit) a new shadow stack for a pthread child.

It is possible for the kernel to complete the clone syscall and set the child's shadow stack pointer to NULL and let the child thread allocate a shadow stack for itself. There are two issues in this approach: It is not compatible with existing code that does inline syscall and it cannot handle signals before the child can successfully allocate a shadow stack.

A 64-bit shadow stack has a size of min(RLIMIT_STACK, 4 GB). A compat-mode thread shadow stack has a size of 1/4 min(RLIMIT_STACK, 4 GB). This allows more threads to run in a 32-bit address space.

---
 arch/x86/include/asm/cet.h         |  3 ++
 arch/x86/include/asm/mmu_context.h |  3 ++
 arch/x86/kernel/cet.c              | 44 ++++++++++++++++++++++++++++++
 arch/x86/kernel/process.c          |  8 ++++++
 4 files changed, 58 insertions(+)
arch/x86/include/asm/cet.h +3 -0
index 73435856ce54..ec4b5e62d0ce 100644
@@ -18,12 +18,15 @@ struct cet_status {
 
 #ifdef CONFIG_X86_CET
 int cet_setup_shstk(void);
+int cet_setup_thread_shstk(struct task_struct *p, unsigned long clone_flags);
 void cet_disable_shstk(void);
 void cet_free_shstk(struct task_struct *p);
 int cet_verify_rstor_token(bool ia32, unsigned long ssp, unsigned long *new_ssp);
 void cet_restore_signal(struct sc_ext *sc);
 int cet_setup_signal(bool ia32, unsigned long rstor, struct sc_ext *sc);
 #else
+static inline int cet_setup_thread_shstk(struct task_struct *p,
+					 unsigned long clone_flags) { return 0; }
 static inline void cet_disable_shstk(void) {}
 static inline void cet_free_shstk(struct task_struct *p) {}
 static inline void cet_restore_signal(struct sc_ext *sc) { return; }
arch/x86/include/asm/mmu_context.h +3 -0
index 27516046117a..e90bd2ee8498 100644
@@ -11,6 +11,7 @@
 
 #include <asm/tlbflush.h>
 #include <asm/paravirt.h>
+#include <asm/cet.h>
 #include <asm/debugreg.h>
 
 extern atomic64_t last_mm_ctx_id;
@@ -146,6 +147,8 @@ do {						\
 #else
 #define deactivate_mm(tsk, mm)			\
 do {						\
+	if (!tsk->vfork_done)			\
+		cet_free_shstk(tsk);		\
 	load_gs_index(0);			\
 	loadsegment(fs, 0);			\
 } while (0)
arch/x86/kernel/cet.c +44 -0

50 lines not on this page · raw message

arch/x86/kernel/process.c +8 -0
index 145a7ac0c19a..3af6b36e1a5c 100644
@@ -43,6 +43,7 @@
 #include <asm/io_bitmap.h>
 #include <asm/proto.h>
 #include <asm/frame.h>
+#include <asm/cet.h>
 
 #include "process.h"
 
@@ -109,6 +110,7 @@ void exit_thread(struct task_struct *tsk)
 
 	free_vm86(t);
 
+	cet_free_shstk(tsk);
 	fpu__drop(fpu);
 }
 
@@ -181,6 +183,12 @@ int copy_thread(unsigned long clone_flags, unsigned long sp, unsigned long arg,
 	if (clone_flags & CLONE_SETTLS)
 		ret = set_new_tls(p, tls);
 
+#ifdef CONFIG_X86_64
+	/* Allocate a new shadow stack for pthread */
+	if (!ret)
+		ret = cet_setup_thread_shstk(p, clone_flags);
+#endif
+
 	if (!ret && unlikely(test_tsk_thread_flag(current, TIF_IO_BITMAP)))
 		io_bitmap_share(p);
 
Signature · 1 line
2.21.0
#40 lore raw

PATCH v18 24/25 x86/cet/shstk: Add arch_prctl functions for shadow stack

In reply to Yu-cheng Yu

arch_prctl(ARCH_X86_CET_STATUS, u64 *args)
Get CET feature status.

The parameter 'args' is a pointer to a user buffer. The kernel returns the following information:

*args = shadow stack/IBT status
*(args + 1) = shadow stack base address
*(args + 2) = shadow stack size

arch_prctl(ARCH_X86_CET_DISABLE, unsigned int features)
Disable CET features specified in 'features'. Return -EPERM if CET is locked.

arch_prctl(ARCH_X86_CET_LOCK)
Lock in CET features.

Also change do_arch_prctl_common()'s parameter 'cpuid_enabled' to 'arg2', as it is now also passed to prctl_cet().

---
 arch/x86/include/asm/cet.h        |  3 ++
 arch/x86/include/uapi/asm/prctl.h |  4 ++
 arch/x86/kernel/Makefile          |  2 +-
 arch/x86/kernel/cet_prctl.c       | 68 +++++++++++++++++++++++++++++++
 arch/x86/kernel/process.c         |  6 +--
 5 files changed, 79 insertions(+), 4 deletions(-)
 create mode 100644 arch/x86/kernel/cet_prctl.c
arch/x86/include/asm/cet.h +3 -0
index ec4b5e62d0ce..16870e5bc8eb 100644
@@ -14,9 +14,11 @@ struct sc_ext;
 struct cet_status {
 	unsigned long	shstk_base;
 	unsigned long	shstk_size;
+	unsigned int	locked:1;
 };
 
 #ifdef CONFIG_X86_CET
+int prctl_cet(int option, u64 arg2);
 int cet_setup_shstk(void);
 int cet_setup_thread_shstk(struct task_struct *p, unsigned long clone_flags);
 void cet_disable_shstk(void);
@@ -25,6 +27,7 @@ int cet_verify_rstor_token(bool ia32, unsigned long ssp, unsigned long *new_ssp)
 void cet_restore_signal(struct sc_ext *sc);
 int cet_setup_signal(bool ia32, unsigned long rstor, struct sc_ext *sc);
 #else
+static inline int prctl_cet(int option, u64 arg2) { return -EINVAL; }
 static inline int cet_setup_thread_shstk(struct task_struct *p,
 					 unsigned long clone_flags) { return 0; }
 static inline void cet_disable_shstk(void) {}
arch/x86/include/uapi/asm/prctl.h +4 -0
index 5a6aac9fa41f..9245bf629120 100644
@@ -14,4 +14,8 @@
 #define ARCH_MAP_VDSO_32	0x2002
 #define ARCH_MAP_VDSO_64	0x2003
 
+#define ARCH_X86_CET_STATUS		0x3001
+#define ARCH_X86_CET_DISABLE		0x3002
+#define ARCH_X86_CET_LOCK		0x3003
+
 #endif /* _ASM_X86_PRCTL_H */
arch/x86/kernel/Makefile +1 -1
index 4a9a7e7d00dc..2f60a28769f9 100644
@@ -151,7 +151,7 @@ obj-$(CONFIG_UNWINDER_FRAME_POINTER)	+= unwind_frame.o
 obj-$(CONFIG_UNWINDER_GUESS)		+= unwind_guess.o
 
 obj-$(CONFIG_AMD_MEM_ENCRYPT)		+= sev-es.o
-obj-$(CONFIG_X86_CET)			+= cet.o
+obj-$(CONFIG_X86_CET)			+= cet.o cet_prctl.o
 
 ###
 # 64 bit specific files
arch/x86/kernel/cet_prctl.c new file +68 -0

68 lines not on this page · raw message

arch/x86/kernel/process.c +3 -3
index 3af6b36e1a5c..9e11e5f589f3 100644
@@ -979,14 +979,14 @@ unsigned long get_wchan(struct task_struct *p)
 }
 
 long do_arch_prctl_common(struct task_struct *task, int option,
-			  unsigned long cpuid_enabled)
+			  unsigned long arg2)
 {
 	switch (option) {
 	case ARCH_GET_CPUID:
 		return get_cpuid_mode();
 	case ARCH_SET_CPUID:
-		return set_cpuid_mode(task, cpuid_enabled);
+		return set_cpuid_mode(task, arg2);
 	}
 
-	return -EINVAL;
+	return prctl_cet(option, arg2);
 }
Signature · 1 line
2.21.0
#41 lore raw

Re: [PATCH v18 24/25] x86/cet/shstk: Add arch_prctl functions for shadow stack

Quoted 9 lines · Yu-cheng Yu

arch_prctl(ARCH_X86_CET_STATUS, u64 *args)
Get CET feature status.

The parameter 'args' is a pointer to a user buffer. The kernel returns the following information:

*args = shadow stack/IBT status
*(args + 1) = shadow stack base address
*(args + 2) = shadow stack size

What's the deal for 32-bit binaries? The in-kernel code looks 64-bit only, but I don't see anything restricting the interface to 64-bit.

Quoted 1 line

+static int copy_status_to_user(struct cet_status *cet, u64 arg2)

This has static scope, but it's still awfully generically named. A cet_ prefix would be nice.

arch/x86/kernel/cet_prctl.c line 22

Quoted 7 lines
arch/x86/kernel/cet_prctl.c new file +7 -0
+{
+	u64 buf[3] = {0, 0, 0};
+
+	if (cet->shstk_size) {
+		buf[0] |= GNU_PROPERTY_X86_FEATURE_1_SHSTK;
+		buf[1] = (u64)cet->shstk_base;
+		buf[2] = (u64)cet->shstk_size;

What's the casting for?

Quoted 6 lines
arch/x86/kernel/cet_prctl.c new file +6 -0
+	}
+
+	return copy_to_user((u64 __user *)arg2, buf, sizeof(buf));
+}
+
+int prctl_cet(int option, u64 arg2)

arch/x86/kernel/cet_prctl.c line 38

Quoted 10 lines
arch/x86/kernel/cet_prctl.c new file +10 -0
+{
+	struct cet_status *cet;
+	unsigned int features;
+
+	/*
+	 * GLIBC's ENOTSUPP == EOPNOTSUPP == 95, and it does not recognize
+	 * the kernel's ENOTSUPP (524).  So return EOPNOTSUPP here.
+	 */
+	if (!IS_ENABLED(CONFIG_X86_CET))
+		return -EOPNOTSUPP;

Let's ignore glibc for a moment. What error code *should* the kernel be returning here? errno(3) says:

EOPNOTSUPP Operation not supported on socket (POSIX.1)
...
ENOTSUP Operation not supported (POSIX.1)

arch/x86/kernel/cet_prctl.c line 43

Quoted 4 lines
arch/x86/kernel/cet_prctl.c new file +4 -0
+	cet = &current->thread.cet;
+
+	if (option == ARCH_X86_CET_STATUS)
+		return copy_status_to_user(cet, arg2);

What's the point of doing copy_status_to_user() if the processor doesn't support CET? In other words, shouldn't this be below the CPU feature check?

Also, please cast arg2 *here*. It becomes a user pointer here, not at the copy_to_user().

arch/x86/kernel/cet_prctl.c line 46

Quoted 2 lines
arch/x86/kernel/cet_prctl.c new file +2 -0
+	if (!static_cpu_has(X86_FEATURE_CET))
+		return -EOPNOTSUPP;

So, you went to the trouble of adding a disabled-features.h entry for this. Why not just do:

	if (cpu_feature_enabled(X86_FEATURE_CET))
		...

instead of the IS_ENABLED() check above? That should get rid of one of these if's.

arch/x86/kernel/cet_prctl.c line 53

Quoted 6 lines
arch/x86/kernel/cet_prctl.c new file +6 -0
+	switch (option) {
+	case ARCH_X86_CET_DISABLE:
+		if (cet->locked)
+			return -EPERM;
+
+		features = (unsigned int)arg2;

What's the purpose of this cast?

arch/x86/kernel/cet_prctl.c line 59

Quoted 5 lines
arch/x86/kernel/cet_prctl.c new file +5 -0
+		if (features & ~GNU_PROPERTY_X86_FEATURE_1_VALID)
+			return -EINVAL;
+		if (features & GNU_PROPERTY_X86_FEATURE_1_SHSTK)
+			cet_disable_shstk();
+		return 0;

This doesn't enforce that the high bits of arg2 be 0. Shouldn't we call them reserved and enforce that they be 0?

arch/x86/kernel/cet_prctl.c line 63

Quoted 3 lines
arch/x86/kernel/cet_prctl.c new file +3 -0
+	case ARCH_X86_CET_LOCK:
+		cet->locked = 1;
+		return 0;

This needs to check for and enforce that arg2==0.

Quoted 4 lines
arch/x86/kernel/cet_prctl.c new file +4 -0
+	default:
+		return -ENOSYS;
+	}
+}
#42 lore raw

Re: [PATCH v18 24/25] x86/cet/shstk: Add arch_prctl functions for shadow stack

Quoted 7 lines · Dave Hansen
Quoted 6 lines · Yu-cheng Yu

arch_prctl(ARCH_X86_CET_STATUS, u64 *args)
Get CET feature status.

The parameter 'args' is a pointer to a user buffer. The kernel returns the following information:

Quoted 6 lines
Quoted 3 lines

*args = shadow stack/IBT status
*(args + 1) = shadow stack base address
*(args + 2) = shadow stack size

What's the deal for 32-bit binaries? The in-kernel code looks 64-bit only, but I don't see anything restricting the interface to 64-bit.

Items in args are 64-bit. A 32-bit binary uses the same interface, but uses only lower bits. I will add that in the comments.

Quoted 4 lines
Quoted 1 line

+static int copy_status_to_user(struct cet_status *cet, u64 arg2)

This has static scope, but it's still awfully generically named. A cet_ prefix would be nice.

I will add that.

Quoted 9 lines

arch/x86/kernel/cet_prctl.c line 22

Quoted 7 lines
arch/x86/kernel/cet_prctl.c new file +7 -0
+{
+	u64 buf[3] = {0, 0, 0};
+
+	if (cet->shstk_size) {
+		buf[0] |= GNU_PROPERTY_X86_FEATURE_1_SHSTK;
+		buf[1] = (u64)cet->shstk_base;
+		buf[2] = (u64)cet->shstk_size;

What's the casting for?

cet->shstk_base and cet->shstk_size are both 'unsigned long', not u64, so the cast.

Quoted 20 lines
Quoted 6 lines
arch/x86/kernel/cet_prctl.c new file +6 -0
+	}
+
+	return copy_to_user((u64 __user *)arg2, buf, sizeof(buf));
+}
+
+int prctl_cet(int option, u64 arg2)

arch/x86/kernel/cet_prctl.c line 38

Quoted 10 lines
arch/x86/kernel/cet_prctl.c new file +10 -0
+{
+	struct cet_status *cet;
+	unsigned int features;
+
+	/*
+	 * GLIBC's ENOTSUPP == EOPNOTSUPP == 95, and it does not recognize
+	 * the kernel's ENOTSUPP (524).  So return EOPNOTSUPP here.
+	 */
+	if (!IS_ENABLED(CONFIG_X86_CET))
+		return -EOPNOTSUPP;

Let's ignore glibc for a moment. What error code *should* the kernel be returning here? errno(3) says:

Quoted 4 lines

EOPNOTSUPP Operation not supported on socket (POSIX.1)
...
ENOTSUP Operation not supported (POSIX.1)

Yeah, other places in kernel use ENOTSUPP. This seems to be out of line. And since the issue is long-existing, applications already know how to deal with it. I should have made that argument. Change it to ENOTSUPP.

Quoted 7 lines

arch/x86/kernel/cet_prctl.c line 43

Quoted 4 lines
arch/x86/kernel/cet_prctl.c new file +4 -0
+	cet = &current->thread.cet;
+
+	if (option == ARCH_X86_CET_STATUS)
+		return copy_status_to_user(cet, arg2);

What's the point of doing copy_status_to_user() if the processor doesn't support CET? In other words, shouldn't this be below the CPU feature check?

The thought was to tell the difference between the kernel itself does not support CET and the system does not have CET. And, if the kernel supports it, show CET status of the thread.

Quoted 2 lines

Also, please cast arg2 *here*. It becomes a user pointer here, not at the copy_to_user().

I will fix it.

Quoted 6 lines

arch/x86/kernel/cet_prctl.c line 46

Quoted 2 lines
arch/x86/kernel/cet_prctl.c new file +2 -0
+	if (!static_cpu_has(X86_FEATURE_CET))
+		return -EOPNOTSUPP;

So, you went to the trouble of adding a disabled-features.h entry for this. Why not just do:

Quoted 6 lines
	if (cpu_feature_enabled(X86_FEATURE_CET))
		...

instead of the IS_ENABLED() check above? That should get rid of one of these if's.

Explained above.

Quoted 9 lines

arch/x86/kernel/cet_prctl.c line 53

Quoted 6 lines
arch/x86/kernel/cet_prctl.c new file +6 -0
+	switch (option) {
+	case ARCH_X86_CET_DISABLE:
+		if (cet->locked)
+			return -EPERM;
+
+		features = (unsigned int)arg2;

What's the purpose of this cast?

Quoted 8 lines

arch/x86/kernel/cet_prctl.c line 59

Quoted 5 lines
arch/x86/kernel/cet_prctl.c new file +5 -0
+		if (features & ~GNU_PROPERTY_X86_FEATURE_1_VALID)
+			return -EINVAL;
+		if (features & GNU_PROPERTY_X86_FEATURE_1_SHSTK)
+			cet_disable_shstk();
+		return 0;

This doesn't enforce that the high bits of arg2 be 0. Shouldn't we call them reserved and enforce that they be 0?

Yes, the code already checks invalid bits. We don't need the cast.

Quoted 5 lines

arch/x86/kernel/cet_prctl.c line 63

Quoted 3 lines
arch/x86/kernel/cet_prctl.c new file +3 -0
+	case ARCH_X86_CET_LOCK:
+		cet->locked = 1;
+		return 0;

This needs to check for and enforce that arg2==0.

Yes.

Quoted 5 lines
Quoted 5 lines
arch/x86/kernel/cet_prctl.c new file +4 -0
+	default:
+		return -ENOSYS;
+	}
+}
#43 lore raw

Re: [PATCH v18 24/25] x86/cet/shstk: Add arch_prctl functions for shadow stack

Quoted 3 lines · Yu-cheng
Quoted 2 lines · Dave Hansen
Quoted 1 line · Yu-cheng Yu

+    u64 buf[3] = {0, 0, 0};

Doesn't the compiler zero these if you initialize it to anything? In other words, doesn't this work?

	u64 buf[3] = {};
Quoted 9 lines
Quoted 6 lines
Quoted 4 lines

+    if (cet->shstk_size) {
+        buf[0] |= GNU_PROPERTY_X86_FEATURE_1_SHSTK; +        buf[1] = (u64)cet->shstk_base;
+        buf[2] = (u64)cet->shstk_size;

What's the casting for?

cet->shstk_base and cet->shstk_size are both 'unsigned long', not u64, so the cast.

Sure, but we don't put explicit casts at every implicit type conversion in the kernel. What function does this casting serve?

Quoted 5 lines
Quoted 5 lines
Quoted 4 lines

+    cet = &current->thread.cet;
+
+    if (option == ARCH_X86_CET_STATUS)
+        return copy_status_to_user(cet, arg2);

Quoted 7 lines
Quoted 3 lines

What's the point of doing copy_status_to_user() if the processor doesn't support CET?  In other words, shouldn't this be below the CPU feature check?

The thought was to tell the difference between the kernel itself does not support CET and the system does not have CET.  And, if the kernel supports it, show CET status of the thread.

Why would that matter to userspace?

If they want to know if the processor has CET support there are existing ways to do it. I don't think this should be part of the ABI.

#44 lore raw

Re: [PATCH v18 24/25] x86/cet/shstk: Add arch_prctl functions for shadow stack

Quoted 3 lines · Dave Hansen
Quoted 2 lines · Yu-cheng
Quoted 1 line · Dave Hansen

On 1/27/21 1:25 PM, Yu-cheng Yu wrote:

[...]

Quoted 4 lines
Quoted 4 lines
Quoted 3 lines

What's the point of doing copy_status_to_user() if the processor doesn't support CET?  In other words, shouldn't this be below the CPU feature check?

Quoted 9 lines
Quoted 3 lines

The thought was to tell the difference between the kernel itself does not support CET and the system does not have CET.  And, if the kernel supports it, show CET status of the thread.

Why would that matter to userspace?

If they want to know if the processor has CET support there are existing ways to do it. I don't think this should be part of the ABI.

Ok, I will make it:

if (!cpu_feature_enabled(X86_FEATURE_CET))

	...
#45 lore raw

Re: [PATCH v18 24/25] x86/cet/shstk: Add arch_prctl functions for shadow stack

In reply to Yu, Yu-cheng
Quoted 11 lines · Yu-cheng
Quoted 10 lines · Dave Hansen
Quoted 9 lines · Yu-cheng Yu

arch_prctl(ARCH_X86_CET_STATUS, u64 *args)
     Get CET feature status.

     The parameter 'args' is a pointer to a user buffer.  The kernel returns the following information:

     *args = shadow stack/IBT status
     *(args + 1) = shadow stack base address
     *(args + 2) = shadow stack size

[...]

Quoted 15 lines
Quoted 15 lines

arch/x86/kernel/cet_prctl.c line 38

Quoted 11 lines
arch/x86/kernel/cet_prctl.c new file +11 -0
+int prctl_cet(int option, u64 arg2)
+{
+    struct cet_status *cet;
+    unsigned int features;
+
+    /*
+     * GLIBC's ENOTSUPP == EOPNOTSUPP == 95, and it does not recognize
+     * the kernel's ENOTSUPP (524).  So return EOPNOTSUPP here.
+     */
+    if (!IS_ENABLED(CONFIG_X86_CET))
+        return -EOPNOTSUPP;

Let's ignore glibc for a moment.  What error code *should* the kernel be returning here?  errno(3) says:

Quoted 6 lines
Quoted 4 lines

        EOPNOTSUPP      Operation not supported on socket (POSIX.1)
...
        ENOTSUP         Operation not supported (POSIX.1)

Yeah, other places in kernel use ENOTSUPP.  This seems to be out of line.  And since the issue is long-existing, applications already know how to deal with it.  I should have made that argument.  Change it to ENOTSUPP.

When I make the change, checkpatch says...

WARNING: ENOTSUPP is not a SUSV4 error code, prefer EOPNOTSUPP #128: FILE: arch/x86/kernel/cet_prctl.c:33:
+ return -ENOTSUPP;

Do we want to reconsider?

[...]

#46 lore raw

Re: [PATCH v18 24/25] x86/cet/shstk: Add arch_prctl functions for shadow stack

Quoted 19 lines · Yu-cheng
Quoted 13 lines · Yu-cheng
Quoted 11 lines · Dave Hansen
Quoted 2 lines · Yu-cheng Yu

+    if (!IS_ENABLED(CONFIG_X86_CET))
+        return -EOPNOTSUPP;

Let's ignore glibc for a moment.  What error code *should* the kernel be returning here?  errno(3) says:

        EOPNOTSUPP      Operation not supported on socket (POSIX.1)
...
        ENOTSUP         Operation not supported (POSIX.1)

Quoted 4 lines

Yeah, other places in kernel use ENOTSUPP.  This seems to be out of line.  And since the issue is long-existing, applications already know how to deal with it.  I should have made that argument.  Change it to ENOTSUPP.

Quoted 7 lines

When I make the change, checkpatch says...

WARNING: ENOTSUPP is not a SUSV4 error code, prefer EOPNOTSUPP #128: FILE: arch/x86/kernel/cet_prctl.c:33:
+        return -ENOTSUPP;

Do we want to reconsider?

I'm not sure I trust checkpatch over manpages. I had to google "SUSV4".
I'm not sure it matters at *all* for a 100% Linux-specific interface.

ENOTSUPP does seem less popular lately:

Quoted 5 lines
$ git diff v5.0.. kernel/ arch/ drivers/ | grep ^+.*return.*E.*NO.*SUP.*\; | grep -o -- -E.*\; | sort | uniq -c | sort -n
... noise
     61 -EOPNOTSUPP);
    260 -ENOTSUPP;
   1577 -EOPNOTSUPP;

but far from unused. That might be due to checkpatch spew more than anything.

#47 lore raw

Re: [PATCH v18 24/25] x86/cet/shstk: Add arch_prctl functions for shadow stack

Quoted 33 lines · Dave Hansen
Quoted 19 lines · Yu-cheng
Quoted 13 lines · Yu-cheng
Quoted 11 lines · Dave Hansen
Quoted 2 lines · Yu-cheng Yu

+    if (!IS_ENABLED(CONFIG_X86_CET))
+        return -EOPNOTSUPP;

Let's ignore glibc for a moment.  What error code *should* the kernel be returning here?  errno(3) says:

        EOPNOTSUPP      Operation not supported on socket (POSIX.1)
...
        ENOTSUP         Operation not supported (POSIX.1)

Quoted 4 lines

Yeah, other places in kernel use ENOTSUPP.  This seems to be out of line.  And since the issue is long-existing, applications already know how to deal with it.  I should have made that argument.  Change it to ENOTSUPP.

Quoted 7 lines

When I make the change, checkpatch says...

WARNING: ENOTSUPP is not a SUSV4 error code, prefer EOPNOTSUPP #128: FILE: arch/x86/kernel/cet_prctl.c:33:
+        return -ENOTSUPP;

Do we want to reconsider?

I'm not sure I trust checkpatch over manpages. I had to google "SUSV4".
I'm not sure it matters at *all* for a 100% Linux-specific interface.

ENOTSUPP does seem less popular lately:

Quoted 9 lines
Quoted 5 lines
$ git diff v5.0.. kernel/ arch/ drivers/ | grep ^+.*return.*E.*NO.*SUP.*\; | grep -o -- -E.*\; | sort | uniq -c | sort -n
... noise
      61 -EOPNOTSUPP);
     260 -ENOTSUPP;
    1577 -EOPNOTSUPP;

but far from unused. That might be due to checkpatch spew more than anything.

Maybe I will keep it ENOTSUPP for now. If any logical reason should come up, I will be happy to change it again. Thanks!

--
Yu-cheng

#48 lore raw

PATCH v18 25/25 mm: Introduce PROT_SHSTK for shadow stack

In reply to Yu-cheng Yu

There are three possible options to create a shadow stack allocation API:
an arch_prctl, a new syscall, or adding PROT_SHSTK to mmap()/mprotect(). Each has its advantages and compromises.

An arch_prctl() is the least intrusive. However, the existing x86 arch_prctl() takes only two parameters. Multiple parameters must be passed in a memory buffer. There is a proposal to pass more parameters in registers [1], but no active discussion on that.

A new syscall minimizes compatibility issues and offers an extensible frame work to other architectures, but this will likely result in some overlap of mmap()/mprotect().

The introduction of PROT_SHSTK to mmap()/mprotect() takes advantage of existing APIs. The x86-specific PROT_SHSTK is translated to VM_SHSTK and a shadow stack mapping is created without reinventing the wheel. There are potential pitfalls though. The most obvious one would be using this as a bypass to shadow stack protection. However, the attacker would have to get to the syscall first.

Since arch_calc_vm_prot_bits() is modified, I have moved arch_vm_get_page _prot() and arch_calc_vm_prot_bits() to x86/include/asm/mman.h. This will be more consistent with other architectures.

[1] https://lore.kernel.org/lkml/[email protected]/

---
 arch/x86/include/asm/mman.h      | 85 ++++++++++++++++++++++++++++++++
 arch/x86/include/uapi/asm/mman.h | 28 ++---------
 include/linux/mm.h               |  1 +
 mm/mmap.c                        |  8 ++-
 4 files changed, 97 insertions(+), 25 deletions(-)
 create mode 100644 arch/x86/include/asm/mman.h
arch/x86/include/asm/mman.h new file +85 -0
new file mode 100644
index 000000000000..db897d14fc37
@@ -0,0 +1,85 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _ASM_X86_MMAN_H
+#define _ASM_X86_MMAN_H
+
+#include <linux/mm.h>
+#include <uapi/asm/mman.h>
+
+#ifdef CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS
+/*
+ * Take the 4 protection key bits out of the vma->vm_flags
+ * value and turn them in to the bits that we can put in
+ * to a pte.
+ *
+ * Only override these if Protection Keys are available
+ * (which is only on 64-bit).
+ */
+#define arch_vm_get_page_prot(vm_flags)	__pgprot(	\
+		((vm_flags) & VM_PKEY_BIT0 ? _PAGE_PKEY_BIT0 : 0) |	\
+		((vm_flags) & VM_PKEY_BIT1 ? _PAGE_PKEY_BIT1 : 0) |	\
+		((vm_flags) & VM_PKEY_BIT2 ? _PAGE_PKEY_BIT2 : 0) |	\
+		((vm_flags) & VM_PKEY_BIT3 ? _PAGE_PKEY_BIT3 : 0))
+
+#define pkey_vm_prot_bits(prot, key) (			\
+		((key) & 0x1 ? VM_PKEY_BIT0 : 0) |      \
+		((key) & 0x2 ? VM_PKEY_BIT1 : 0) |      \
+		((key) & 0x4 ? VM_PKEY_BIT2 : 0) |      \
+		((key) & 0x8 ? VM_PKEY_BIT3 : 0))
+#else
+#define pkey_vm_prot_bits(prot, key) (0)
+#endif
+
+static inline unsigned long arch_calc_vm_prot_bits(unsigned long prot,
+	unsigned long pkey)
+{
+	unsigned long vm_prot_bits = pkey_vm_prot_bits(prot, pkey);
+
+	if (!(prot & PROT_WRITE) && (prot & PROT_SHSTK))
+		vm_prot_bits |= VM_SHSTK;
+
+	return vm_prot_bits;
+}
+
+#define arch_calc_vm_prot_bits(prot, pkey) arch_calc_vm_prot_bits(prot, pkey)
+
+#ifdef CONFIG_X86_CET
+static inline bool arch_validate_prot(unsigned long prot, unsigned long addr)
+{
+	unsigned long valid = PROT_READ | PROT_WRITE | PROT_EXEC | PROT_SEM;
+
+	if (prot & ~(valid | PROT_SHSTK))
+		return false;
+
+	if (prot & PROT_SHSTK) {
+		struct vm_area_struct *vma;
+
+		if (!current->thread.cet.shstk_size)
+			return false;
+
+		/*
+		 * A shadow stack mapping is indirectly writable by only
+		 * the CALL and WRUSS instructions, but not other write
+		 * instructions).  PROT_SHSTK and PROT_WRITE are mutually
+		 * exclusive.
+		 */
+		if (prot & PROT_WRITE)
+			return false;
+
+		vma = find_vma(current->mm, addr);
+		if (!vma)
+			return false;
+
+		/*
+		 * Shadow stack cannot be backed by a file or shared.
+		 */
+		if (vma->vm_file || (vma->vm_flags & VM_SHARED))
+			return false;
+	}
+
+	return true;
+}
+
+#define arch_validate_prot arch_validate_prot
+#endif
+
+#endif /* _ASM_X86_MMAN_H */
arch/x86/include/uapi/asm/mman.h +4 -24
index d4a8d0424bfb..39bb7db344a6 100644
@@ -1,31 +1,11 @@
 /* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
-#ifndef _ASM_X86_MMAN_H
-#define _ASM_X86_MMAN_H
+#ifndef _UAPI_ASM_X86_MMAN_H
+#define _UAPI_ASM_X86_MMAN_H
 
 #define MAP_32BIT	0x40		/* only give out 32bit addresses */
 
-#ifdef CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS
-/*
- * Take the 4 protection key bits out of the vma->vm_flags
- * value and turn them in to the bits that we can put in
- * to a pte.
- *
- * Only override these if Protection Keys are available
- * (which is only on 64-bit).
- */
-#define arch_vm_get_page_prot(vm_flags)	__pgprot(	\
-		((vm_flags) & VM_PKEY_BIT0 ? _PAGE_PKEY_BIT0 : 0) |	\
-		((vm_flags) & VM_PKEY_BIT1 ? _PAGE_PKEY_BIT1 : 0) |	\
-		((vm_flags) & VM_PKEY_BIT2 ? _PAGE_PKEY_BIT2 : 0) |	\
-		((vm_flags) & VM_PKEY_BIT3 ? _PAGE_PKEY_BIT3 : 0))
-
-#define arch_calc_vm_prot_bits(prot, key) (		\
-		((key) & 0x1 ? VM_PKEY_BIT0 : 0) |      \
-		((key) & 0x2 ? VM_PKEY_BIT1 : 0) |      \
-		((key) & 0x4 ? VM_PKEY_BIT2 : 0) |      \
-		((key) & 0x8 ? VM_PKEY_BIT3 : 0))
-#endif
+#define PROT_SHSTK	0x10		/* shadow stack pages */
 
 #include <asm-generic/mman.h>
 
-#endif /* _ASM_X86_MMAN_H */
+#endif /* _UAPI_ASM_X86_MMAN_H */
include/linux/mm.h +1 -0
index 06e9899e13b8..f3a3b6be97e2 100644
@@ -342,6 +342,7 @@ extern unsigned int kobjsize(const void *objp);
 
 #if defined(CONFIG_X86)
 # define VM_PAT		VM_ARCH_1	/* PAT reserves whole VMA at once (x86) */
+# define VM_ARCH_CLEAR	VM_SHSTK
 #elif defined(CONFIG_PPC)
 # define VM_SAO		VM_ARCH_1	/* Strong Access Ordering (powerpc) */
 #elif defined(CONFIG_PARISC)
mm/mmap.c +7 -1
index 95ce7cd68654..9434469db2ce 100644
@@ -1483,6 +1483,12 @@ unsigned long do_mmap(struct file *file, unsigned long addr,
 		struct inode *inode = file_inode(file);
 		unsigned long flags_mask;
 
+		/*
+		 * Call stack cannot be backed by a file.
+		 */
+		if (vm_flags & VM_SHSTK)
+			return -EINVAL;
+
 		if (!file_mmap_ok(file, inode, pgoff, len))
 			return -EOVERFLOW;
 
@@ -1547,7 +1553,7 @@ unsigned long do_mmap(struct file *file, unsigned long addr,
 	} else {
 		switch (flags & MAP_TYPE) {
 		case MAP_SHARED:
-			if (vm_flags & (VM_GROWSDOWN|VM_GROWSUP))
+			if (vm_flags & (VM_GROWSDOWN|VM_GROWSUP|VM_SHSTK))
 				return -EINVAL;
 			/*
 			 * Ignore pgoff.
Signature · 1 line
2.21.0