ARM: dts: sti: add the spinor controller node within stih407-family
PATCH 1/2 ARM: dts: sti: add the spinor controller node within stih407-family
add the spinor controller node within stih407-family.
--- arch/arm/boot/dts/stih407-family.dtsi | 15 +++++++++++++++ 1 file changed, 15 insertions(+)
arch/arm/boot/dts/stih407-family.dtsi +15 -0
@@ -616,6 +616,21 @@ st,lpc-mode = <ST_LPC_MODE_CLKSRC>; }; + spifsm: spifsm@9022000{ + compatible = "st,spi-fsm"; + reg = <0x9022000 0x1000>; + reg-names = "spi-fsm"; + clocks = <&clk_s_c0_flexgen CLK_FLASH_PROMIP>; + clock-names = "emi_clk"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fsm>; + st,syscfg = <&syscfg_core>; + st,boot-device-reg = <0x8c4>; + st,boot-device-spi = <0x68>; + + status = "disabled"; + }; + sata0: sata@9b20000 { compatible = "st,ahci"; reg = <0x9b20000 0x1000>;
Signature · 7 lines
2.17.1 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Quoted 4 lines · Alain Volmat
add the spinor controller node within stih407-family.
Signed-off-by Alain Volmat <[email protected]>
dts changes look ok to me, but please resend considering:
- Add a proper changelog text, rather than repeating the subject in the body. I'm sure you can find something useful to say about this change:
Why do you need this controller? Why was this not originally part of the .dtsi file?
- Address your patches to the correct recipients. I see you have eight addresses on 'To:' and only yourself on 'Cc'. Try to find out who would be the person to pick up the patches and send it only to them, with others in Cc. [email protected] should not be in either list here, because that just means we get it in patchwork for the soc tree, but these should be picked up by the platform maintainer and forward to us from there.
Arnd