Add support for ECDSA image signing (with test)
Subsystems (2)
v5 cover Add support for ECDSA image signing (with test)
## Purpose and intent
The purpose of this series is to enable ECDSA as an alternative to RSA for FIT signing. As new chips have built-in support for ECDSA verified boot, it makes sense to stick to one signing algorithm, instead of resorting to RSA for u-boot images.
The focus of this series is signing an existing FIT image:
mkimage -F some-existing.fit --signing-key some/key.pem
Signing while assembling a FIT is not a tested use case.
# Implementation
## Code organization
Unlike the RSA path, which mixes host and firmware code in the same, source files, this series keeps a very clear distinction. ecdsa-libcrypto.c is intended to be used for host code and only for host code. There is more opportunity for code reuse this way.
## Signing
There is one major difference from the RSA path. The 'key-name-hint' property is ignored in the ECDSA path. There are two reasons:
(1) The intent of 'key-name-hint' is not clear
(2) Initial implementation is much easier to review
There is an intentional side-effect. The RSA path takes 'key-name-hint' to decide which key file to read from disk. In the context of "which fdt node describes my signing key", this makes sense. On the other hand, 'key-name-hint' is also used as the basename of where the key is on the filesystem. This leads to some funny search paths, such as
"some/dir/(null).key"
So I am using the -K option to mkimage as the _full_ path to the key file. It doesn't have to be named .key, it doesn't have to be named .crt, and it doesn't have to exist in a particular directory (as is the case for the RSA path). I understand and recognize that this discrepancy must be resolved, but resolving it right now would make the initial implementation much harder and longer.
# Testing
test/py/tests/test_fit_ecdsa.py is implemented withe the goal to check that the signing is done correctly, and that the signature is encoded in the proper raw format. Verification is done with pyCryptodomex, so this test will catch both coding errors and openssl bugs. This is the only scope of testing proposed here.
# Things not yet resolved:
- is mkimage '-k' supposed to be a directory or file path
I'm hoping I can postpone answering this question pending further discussion.
Changes since v4:
- Fixed tools/ build issue with # FIT_SIGNATURE is not selected
This caught me by surprise that the build of the host tools could somehow depend on the target configuration. In my view, the tools should behave identically across all targets. However, I've decided to go along with it, and fix the build.
Changes since v3:
- Don't use 'log_msg_ret()', as it's not available host-side
Changes since v1 and v2:
- Added lots of function comments
- Replaced hardcoded error numbers with more meaningful errno numbers
- Changed some error paths to use 'return log_msg_ret'
Alexandru Gagniuc (6):
lib: Rename rsa-checksum.c to hash-checksum.c lib/rsa: Make fdt_add_bignum() available outside of RSA code
lib: Add support for ECDSA image signing
doc: signature.txt: Document devicetree format for ECDSA keys test/py: Add pycryptodomex to list of required pakages test/py: ecdsa: Add test for mkimage ECDSA signing
common/image-fit-sig.c | 2 +-
common/image-sig.c | 13 +-
doc/uImage.FIT/signature.txt | 7 +-
include/image.h | 5 +-
include/u-boot/ecdsa.h | 94 ++++++
include/u-boot/fdt-libcrypto.h | 27 ++
.../{rsa-checksum.h => hash-checksum.h} | 0
lib/Makefile | 1 +
lib/crypto/pkcs7_verify.c | 2 +-
lib/crypto/x509_public_key.c | 2 +-
lib/ecdsa/ecdsa-libcrypto.c | 306 ++++++++++++++++++
lib/fdt-libcrypto.c | 72 +++++
lib/{rsa/rsa-checksum.c => hash-checksum.c} | 3 +-
lib/rsa/Makefile | 2 +-
lib/rsa/rsa-sign.c | 65 +---
test/py/requirements.txt | 1 +
test/py/tests/test_fit_ecdsa.py | 111 +++++++
tools/Makefile | 11 +-
18 files changed, 649 insertions(+), 75 deletions(-)
create mode 100644 include/u-boot/ecdsa.h
create mode 100644 include/u-boot/fdt-libcrypto.h
rename include/u-boot/{rsa-checksum.h => hash-checksum.h} (100%)
create mode 100644 lib/ecdsa/ecdsa-libcrypto.c
create mode 100644 lib/fdt-libcrypto.c
rename lib/{rsa/rsa-checksum.c => hash-checksum.c} (96%)
create mode 100644 test/py/tests/test_fit_ecdsa.pySignature · 1 line
2.26.2
PATCH v5 1/6 lib: Rename rsa-checksum.c to hash-checksum.c
rsa-checksum.c sontains the hash_calculate() implementations. Despite the "rsa-" file prefix, this function is useful for other algorithms.
To prevent confusion, move this file to lib/, and rename it to hash-checksum.c, to give it a more "generic" feel.
---
common/image-fit-sig.c | 2 +-
common/image-sig.c | 2 +-
include/image.h | 2 +-
include/u-boot/{rsa-checksum.h => hash-checksum.h} | 0
lib/Makefile | 1 +
lib/crypto/pkcs7_verify.c | 2 +-
lib/crypto/x509_public_key.c | 2 +-
lib/{rsa/rsa-checksum.c => hash-checksum.c} | 3 ++-
lib/rsa/Makefile | 2 +-
tools/Makefile | 3 ++-
10 files changed, 11 insertions(+), 8 deletions(-)
rename include/u-boot/{rsa-checksum.h => hash-checksum.h} (100%)
rename lib/{rsa/rsa-checksum.c => hash-checksum.c} (96%)common/image-fit-sig.c +1 -1
@@ -15,7 +15,7 @@ DECLARE_GLOBAL_DATA_PTR;#include <fdt_region.h> #include <image.h> #include <u-boot/rsa.h> -#include <u-boot/rsa-checksum.h> +#include <u-boot/hash-checksum.h> #define IMAGE_MAX_HASHED_NODES 100
common/image-sig.c +1 -1
@@ -16,7 +16,7 @@ DECLARE_GLOBAL_DATA_PTR;#endif /* !USE_HOSTCC*/ #include <image.h> #include <u-boot/rsa.h> -#include <u-boot/rsa-checksum.h> +#include <u-boot/hash-checksum.h> #define IMAGE_MAX_HASHED_NODES 100
include/image.h +1 -1
@@ -1259,7 +1259,7 @@ struct image_region { };#if IMAGE_ENABLE_VERIFY -# include <u-boot/rsa-checksum.h> +# include <u-boot/hash-checksum.h> #endif struct checksum_algo {const char *name;
include/u-boot/hash-checksum.h renamed from include/u-boot/rsa-checksum.h +0 -0
lib/Makefile +1 -0
@@ -60,6 +60,7 @@ endif obj-$(CONFIG_$(SPL_)ACPIGEN) += acpi/ obj-$(CONFIG_$(SPL_)MD5) += md5.o obj-$(CONFIG_$(SPL_)RSA) += rsa/ +obj-$(CONFIG_FIT_SIGNATURE) += hash-checksum.o obj-$(CONFIG_SHA1) += sha1.o obj-$(CONFIG_SHA256) += sha256.o obj-$(CONFIG_SHA512_ALGO) += sha512.o
lib/crypto/pkcs7_verify.c +1 -1
@@ -15,7 +15,7 @@#include <linux/bitops.h> #include <linux/compat.h> #include <linux/asn1.h> -#include <u-boot/rsa-checksum.h> +#include <u-boot/hash-checksum.h> #include <crypto/public_key.h> #include <crypto/pkcs7_parser.h> #else
lib/crypto/x509_public_key.c +1 -1
@@ -19,7 +19,7 @@#include <linux/kernel.h> #ifdef __UBOOT__#include <crypto/x509_parser.h> -#include <u-boot/rsa-checksum.h> +#include <u-boot/hash-checksum.h> #else #include <linux/slab.h> #include <keys/asymmetric-subtype.h>
lib/hash-checksum.c renamed from lib/rsa/rsa-checksum.c +2 -1
@@ -13,7 +13,8 @@#else #include "fdt_host.h" #endif -#include <u-boot/rsa.h> +#include <hash.h> +#include <image.h> int hash_calculate(const char *name, const struct image_region region[],
lib/rsa/Makefile +1 -1
@@ -5,6 +5,6 @@ # (C) Copyright 2000-2007 # Wolfgang Denk, DENX Software Engineering, wd at denx.de. -obj-$(CONFIG_$(SPL_TPL_)RSA_VERIFY) += rsa-verify.o rsa-checksum.o +obj-$(CONFIG_$(SPL_TPL_)RSA_VERIFY) += rsa-verify.o obj-$(CONFIG_$(SPL_TPL_)RSA_VERIFY_WITH_PKEY) += rsa-keyprop.o obj-$(CONFIG_RSA_SOFTWARE_EXP) += rsa-mod-exp.o
tools/Makefile +2 -1
@@ -67,7 +67,7 @@ LIBFDT_OBJS := $(addprefix libfdt/, fdt.o fdt_ro.o fdt_wip.o fdt_sw.o fdt_rw.o \ fdt_strerror.o fdt_empty_tree.o fdt_addresses.o fdt_overlay.o) RSA_OBJS-$(CONFIG_FIT_SIGNATURE) := $(addprefix lib/rsa/, \ - rsa-sign.o rsa-verify.o rsa-checksum.o \ + rsa-sign.o rsa-verify.o \ rsa-mod-exp.o) AES_OBJS-$(CONFIG_FIT_CIPHER) := $(addprefix lib/aes/, \
@@ -106,6 +106,7 @@ dumpimage-mkimage-objs := aisimage.o \ socfpgaimage.o \ sunxi_egon.o \ lib/crc16.o \ + lib/hash-checksum.o \ lib/sha1.o \ lib/sha256.o \ lib/sha512.o \
Signature · 1 line
2.26.2
PATCH v5 2/6 lib/rsa: Make fdt_add_bignum() available outside of RSA code
In reply to Alexandru Gagniucfdt_add_bignum() is useful for algorithms other than just RSA. To allow its use for ECDSA, move it to a common file under lib/.
The new file is suffixed with '-libcrypto' because it has a direct dependency on openssl. This is due to the use of the "BIGNUM *" type.
--- include/u-boot/fdt-libcrypto.h | 27 +++++++++++++ lib/fdt-libcrypto.c | 72 ++++++++++++++++++++++++++++++++++ lib/rsa/rsa-sign.c | 65 +----------------------------- tools/Makefile | 5 +++ 4 files changed, 105 insertions(+), 64 deletions(-) create mode 100644 include/u-boot/fdt-libcrypto.h create mode 100644 lib/fdt-libcrypto.c
include/u-boot/fdt-libcrypto.h new file +27 -0
@@ -0,0 +1,27 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* +* Copyright (c) 2020, Alexandru Gagniuc <[email protected]> +* Copyright (c) 2013, Google Inc. +*/ + +#ifndef _FDT_LIBCRYPTO_H +#define _FDT_LIBCRYPTO_H + +#include <openssl/bn.h> + +/** +* fdt_add_bignum() - Write a libcrypto BIGNUM as an FDT property +* +* Convert a libcrypto BIGNUM * into a big endian array of integers. +* +* @blob: FDT blob to modify +* @noffset: Offset of the FDT node +* @prop_name: What to call the property in the FDT +* @num: pointer to a libcrypto big number +* @num_bits: How big is 'num' in bits? +* @return 0 if all good all working, -ve on horror +*/ +int fdt_add_bignum (void *blob,int noffset,const char *prop_name, +BIGNUM *num,int num_bits); + +#endif /* _FDT_LIBCRYPTO_H */
lib/fdt-libcrypto.c new file +72 -0
72 lines not on this page · raw message
lib/rsa/rsa-sign.c +1 -64
77 lines not on this page · raw message
tools/Makefile +5 -0
@@ -73,6 +73,10 @@ RSA_OBJS-$(CONFIG_FIT_SIGNATURE) := $(addprefix lib/rsa/, \ AES_OBJS-$(CONFIG_FIT_CIPHER) := $(addprefix lib/aes/, \ aes-encrypt.o aes-decrypt.o) +# Cryptographic helpers that depend on openssl/libcrypto +LIBCRYPTO_OBJS-$(CONFIG_FIT_SIGNATURE) := $(addprefix lib/, \ + fdt-libcrypto.o) + ROCKCHIP_OBS = lib/rc4.o rkcommon.o rkimage.o rksd.o rkspi.o # common objs for dumpimage and mkimage
@@ -115,6 +119,7 @@ dumpimage-mkimage-objs := aisimage.o \ zynqimage.o \ zynqmpimage.o \ zynqmpbif.o \ + $(LIBCRYPTO_OBJS-y) \ $(LIBFDT_OBJS) \ gpimage.o \ gpimage-common.o \
Signature · 1 line
2.26.2
PATCH v5 3/6 lib: Add support for ECDSA image signing
In reply to Alexandru Gagniucmkimage supports rsa2048, and rsa4096 signatures. With newer silicon now supporting hardware-accelerated ECDSA, it makes sense to expand signing support to elliptic curves.
Implement host-side ECDSA signing and verification with libcrypto. Device-side implementation of signature verification is beyond the scope of this patch.
--- common/image-sig.c | 11 +- include/image.h | 3 + include/u-boot/ecdsa.h | 94 +++++++++++ lib/ecdsa/ecdsa-libcrypto.c | 306 ++++++++++++++++++++++++++++++++++++ tools/Makefile | 3 + 5 files changed, 415 insertions(+), 2 deletions(-) create mode 100644 include/u-boot/ecdsa.h create mode 100644 lib/ecdsa/ecdsa-libcrypto.c
common/image-sig.c +9 -2
@@ -15,6 +15,7 @@DECLARE_GLOBAL_DATA_PTR ;#endif /* !USE_HOSTCC*/ #include <image.h> +#include <u-boot/ecdsa.h> #include <u-boot/rsa.h> #include <u-boot/hash-checksum.h>
@@ -82,8 +83,14 @@ struct crypto_algo crypto_algos[] = { .sign = rsa_sign, .add_verify_data = rsa_add_verify_data, .verify = rsa_verify, - } - + }, + { + .name = "ecdsa256", + .key_len = ECDSA256_BYTES, + .sign = ecdsa_sign, + .add_verify_data = ecdsa_add_verify_data, + .verify = ecdsa_verify, + }, };struct padding_algo padding_algos[] = {
include/image.h +3 -0
@@ -1200,16 +1200,19 @@ int calculate_hash(const void *data, int data_len, const char *algo,# if defined(CONFIG_FIT_SIGNATURE )# define IMAGE_ENABLE_SIGN 1# define IMAGE_ENABLE_VERIFY 1 +# define IMAGE_ENABLE_VERIFY_ECDSA 1# define FIT_IMAGE_ENABLE_VERIFY 1# include <openssl/evp.h> # else # define IMAGE_ENABLE_SIGN 0# define IMAGE_ENABLE_VERIFY 0 +# define IMAGE_ENABLE_VERIFY_ECDSA 0# define FIT_IMAGE_ENABLE_VERIFY 0# endif #else # define IMAGE_ENABLE_SIGN 0# define IMAGE_ENABLE_VERIFY CONFIG_IS_ENABLED(RSA_VERIFY) +# define IMAGE_ENABLE_VERIFY_ECDSA 0# define FIT_IMAGE_ENABLE_VERIFY CONFIG_IS_ENABLED(FIT_SIGNATURE)#endif
include/u-boot/ecdsa.h new file +94 -0
94 lines not on this page · raw message
lib/ecdsa/ecdsa-libcrypto.c new file +306 -0
306 lines not on this page · raw message
tools/Makefile +3 -0
@@ -70,6 +70,8 @@ RSA_OBJS-$(CONFIG_FIT_SIGNATURE) := $(addprefix lib/rsa/, \ rsa-sign.o rsa-verify.o \ rsa-mod-exp.o) +ECDSA_OBJS-$(CONFIG_FIT_SIGNATURE) := $(addprefix lib/ecdsa/, ecdsa-libcrypto.o) + AES_OBJS-$(CONFIG_FIT_CIPHER) := $(addprefix lib/aes/, \ aes-encrypt.o aes-decrypt.o)
@@ -124,6 +126,7 @@ dumpimage-mkimage-objs := aisimage.o \ gpimage.o \ gpimage-common.o \ mtk_image.o \ + $(ECDSA_OBJS-y) \ $(RSA_OBJS-y) \ $(AES_OBJS-y)
Signature · 1 line
2.26.2
PATCH v5 4/6 doc: signature.txt: Document devicetree format for ECDSA keys
In reply to Alexandru Gagniuc--- doc/uImage.FIT/signature.txt | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-)
doc/uImage.FIT/signature.txt +6 -1
@@ -142,7 +142,7 @@ public key in U-Boot's control FDT (using CONFIG_OF_CONTROL). Public keys should be stored as sub-nodes in a /signature node. Required properties are: -- algo: Algorithm name (e.g. "sha1,rsa2048") +- algo: Algorithm name (e.g. "sha1,rsa2048" or "sha256,ecdsa256") Optional properties are:
@@ -167,6 +167,11 @@ For RSA the following are mandatory: - rsa,r-squared: (2^num-bits)^2 as a big-endian multi-word integer - rsa,n0-inverse: -1 / modulus[0] mod 2^32 +For ECDSA the following are mandatory: +- ecdsa,curve: Name of ECDSA curve (e.g. "prime256v1") +- ecdsa,x-point: Public key X coordinate as a big-endian multi-word integer +- ecdsa,y-point: Public key Y coordinate as a big-endian multi-word integer + These parameters can be added to a binary device tree using parameter -K of the mkimage command::
Signature · 1 line
2.26.2
PATCH v5 5/6 test/py: Add pycryptodomex to list of required pakages
In reply to Alexandru GagniucWe wish to use pycryptodomex to verify code paths involving ECDSA signatures. Add it to requirements.txt so that they get picked up automatically .gitlab and .azure tasks
--- test/py/requirements.txt | 1 + 1 file changed, 1 insertion(+)
test/py/requirements.txt +1 -0
@@ -10,6 +10,7 @@ packaging==19.2 pbr==5.4.3 pluggy==0.13.0 py==1.8.0 +pycryptodomex==3.9.8 pyparsing==2.4.2 pytest==5.2.1 python-mimeparse==1.6.0
Signature · 1 line
2.26.2
PATCH v5 6/6 test/py: ecdsa: Add test for mkimage ECDSA signing
In reply to Alexandru GagniucAdd a test to make sure that the ECDSA signatures generated by mkimage can be verified successfully. pyCryptodomex was chosen as the crypto library because it integrates much better with python code. Using openssl would have been unnecessarily painful.
--- test/py/tests/test_fit_ecdsa.py | 111 ++++++++++++++++++++++++++++++++ 1 file changed, 111 insertions(+) create mode 100644 test/py/tests/test_fit_ecdsa.py
test/py/tests/test_fit_ecdsa.py new file +111 -0
@@ -0,0 +1,111 @@ +# SPDX-License-Identifier: GPL-2.0+ +# +# Copyright (c) 2020,2021 Alexandru Gagniuc <[email protected]> + +""" +Test ECDSA signing of FIT images + +This test uses mkimage to sign an existing FIT image with an ECDSA key. The +signature is then extracted, and verified against pyCryptodome. +This test doesn't run the sandbox. It only checks the host tool 'mkimage' +""" + +import pytest +import u_boot_utils as util +from Cryptodome.Hash import SHA256 +from Cryptodome.PublicKey import ECC +from Cryptodome.Signature import DSS + +class SignableFitImage(object): + """ Helper to manipulate a FIT image on disk """ + def __init__(self, cons, file_name): + self.fit = file_name + self.cons = cons + self.signable_nodes = set() + + def __fdt_list(self, path): + return util.run_and_log(self.cons, f'fdtget -l {self.fit} {path}') + + def __fdt_set(self, node, **prop_value): + for prop, value in prop_value.items(): + util.run_and_log(self.cons, f'fdtput -ts {self.fit} {node} {prop} {value}') + + def __fdt_get_binary(self, node, prop): + numbers = util.run_and_log(self.cons, f'fdtget -tbi {self.fit} {node} {prop}') + + bignum = bytearray() + for little_num in numbers.split(): + bignum.append(int(little_num)) + + return bignum + + def find_signable_image_nodes(self): + for node in self.__fdt_list('/images').split(): + image = f'/images/{node}' + if 'signature' in self.__fdt_list(image): + self.signable_nodes.add(image) + + return self.signable_nodes + + def change_signature_algo_to_ecdsa(self): + for image in self.signable_nodes: + self.__fdt_set(f'{image}/signature', algo='sha256,ecdsa256') + + def sign(self, mkimage, key_file): + util.run_and_log(self.cons, [mkimage, '-F', self.fit, f'-k{key_file}']) + + def check_signatures(self, key): + for image in self.signable_nodes: + raw_sig = self.__fdt_get_binary(f'{image}/signature', 'value') + raw_bin = self.__fdt_get_binary(image, 'data') + + sha = SHA256.new(raw_bin) + verifier = DSS.new(key, 'fips-186-3') + verifier.verify(sha, bytes(raw_sig)) + + + at pytest.mark.buildconfigspec('fit_signature') + at pytest.mark.requiredtool('dtc') + at pytest.mark.requiredtool('fdtget') + at pytest.mark.requiredtool('fdtput') +def test_fit_ecdsa(u_boot_console): + """ Test that signatures generated by mkimage are legible. """ + def generate_ecdsa_key(): + return ECC.generate(curve='prime256v1') + + def assemble_fit_image(dest_fit, its, destdir): + dtc_args = f'-I dts -O dtb -i {destdir}' + util.run_and_log(cons, [mkimage, '-D', dtc_args, '-f', its, dest_fit]) + + def dtc(dts): + dtb = dts.replace('.dts', '.dtb') + util.run_and_log(cons, f'dtc {datadir}/{dts} -O dtb -o {tempdir}/{dtb}') + + cons = u_boot_console + mkimage = cons.config.build_dir + '/tools/mkimage' + datadir = cons.config.source_dir + '/test/py/tests/vboot/' + tempdir = cons.config.result_dir + key_file = f'{tempdir}/ecdsa-test-key.pem' + fit_file = f'{tempdir}/test.fit' + dtc('sandbox-kernel.dts') + + key = generate_ecdsa_key() + + # Create a fake kernel image -- zeroes will do just fine + with open(f'{tempdir}/test-kernel.bin', 'w') as fd: + fd.write(500 * chr(0)) + + # invokations of mkimage expect to read the key from disk + with open(key_file, 'w') as f: + f.write(key.export_key(format='PEM')) + + assemble_fit_image(fit_file, f'{datadir}/sign-images-sha256.its', tempdir) + + fit = SignableFitImage(cons, fit_file) + nodes = fit.find_signable_image_nodes() + if len(nodes) == 0: + raise ValueError('FIT image has no "/image" nodes with "signature"') + + fit.change_signature_algo_to_ecdsa() + fit.sign(mkimage, key_file) + fit.check_signatures(key)
Signature · 1 line
2.26.2
PATCH v5 6/6 test/py: ecdsa: Add test for mkimage ECDSA signing
Hi Alexandru,
Quoted 131 lines · Alexandru Gagniuc
Add a test to make sure that the ECDSA signatures generated by mkimage can be verified successfully. pyCryptodomex was chosen as the crypto library because it integrates much better with python code. Using openssl would have been unnecessarily painful.
Signed-off-by Alexandru Gagniuc <[email protected]>Reviewed-by Simon Glass <[email protected]>--- test/py/tests/test_fit_ecdsa.py | 111 ++++++++++++++++++++++++++++++++ 1 file changed, 111 insertions(+) create mode 100644 test/py/tests/test_fit_ecdsa.pytest/py/tests/test_fit_ecdsa.py new file +111
-1@@ -0,0 +1,111 @@ +# SPDX-License-Identifier: GPL-2.0+ +# +# Copyright (c) 2020,2021 Alexandru Gagniuc <[email protected]> + +""" +Test ECDSA signing of FIT images + +This test uses mkimage to sign an existing FIT image with an ECDSA key. The +signature is then extracted, and verified against pyCryptodome. +This test doesn't run the sandbox. It only checks the host tool 'mkimage' +""" + +import pytest +import u_boot_utils as util +from Cryptodome.Hash import SHA256 +from Cryptodome.PublicKey import ECC +from Cryptodome.Signature import DSS + +class SignableFitImage(object): + """ Helper to manipulate a FIT image on disk """ + def __init__(self, cons, file_name): + self.fit = file_name + self.cons = cons + self.signable_nodes = set() + + def __fdt_list(self, path): + return util.run_and_log(self.cons, f'fdtget -l {self.fit} {path}') + + def __fdt_set(self, node, **prop_value): + for prop, value in prop_value.items(): + util.run_and_log(self.cons, f'fdtput -ts {self.fit} {node} {prop} {value}') + + def __fdt_get_binary(self, node, prop): + numbers = util.run_and_log(self.cons, f'fdtget -tbi {self.fit} {node} {prop}') + + bignum = bytearray() + for little_num in numbers.split(): + bignum.append(int(little_num)) + + return bignum + + def find_signable_image_nodes(self): + for node in self.__fdt_list('/images').split(): + image = f'/images/{node}' + if 'signature' in self.__fdt_list(image): + self.signable_nodes.add(image) + + return self.signable_nodes + + def change_signature_algo_to_ecdsa(self): + for image in self.signable_nodes: + self.__fdt_set(f'{image}/signature', algo='sha256,ecdsa256') + + def sign(self, mkimage, key_file): + util.run_and_log(self.cons, [mkimage, '-F', self.fit, f'-k{key_file}']) + + def check_signatures(self, key): + for image in self.signable_nodes: + raw_sig = self.__fdt_get_binary(f'{image}/signature', 'value') + raw_bin = self.__fdt_get_binary(image, 'data') + + sha = SHA256.new(raw_bin) + verifier = DSS.new(key, 'fips-186-3') + verifier.verify(sha, bytes(raw_sig)) + + + at pytest.mark.buildconfigspec('fit_signature') + at pytest.mark.requiredtool('dtc') + at pytest.mark.requiredtool('fdtget') + at pytest.mark.requiredtool('fdtput') +def test_fit_ecdsa(u_boot_console): + """ Test that signatures generated by mkimage are legible. """ + def generate_ecdsa_key(): + return ECC.generate(curve='prime256v1') + + def assemble_fit_image(dest_fit, its, destdir): + dtc_args = f'-I dts -O dtb -i {destdir}' + util.run_and_log(cons, [mkimage, '-D', dtc_args, '-f', its, dest_fit]) + + def dtc(dts): + dtb = dts.replace('.dts', '.dtb') + util.run_and_log(cons, f'dtc {datadir}/{dts} -O dtb -o {tempdir}/{dtb}') + + cons = u_boot_console + mkimage = cons.config.build_dir + '/tools/mkimage' + datadir = cons.config.source_dir + '/test/py/tests/vboot/' + tempdir = cons.config.result_dir + key_file = f'{tempdir}/ecdsa-test-key.pem' + fit_file = f'{tempdir}/test.fit' + dtc('sandbox-kernel.dts') + + key = generate_ecdsa_key() + + # Create a fake kernel image -- zeroes will do just fine + with open(f'{tempdir}/test-kernel.bin', 'w') as fd: + fd.write(500 * chr(0)) + + # invokations of mkimage expect to read the key from disk + with open(key_file, 'w') as f: + f.write(key.export_key(format='PEM')) + + assemble_fit_image(fit_file, f'{datadir}/sign-images-sha256.its', tempdir) + + fit = SignableFitImage(cons, fit_file) + nodes = fit.find_signable_image_nodes() + if len(nodes) == 0: + raise ValueError('FIT image has no "/image" nodes with "signature"') + + fit.change_signature_algo_to_ecdsa() + fit.sign(mkimage, key_file) + fit.check_signatures(key) --
Quoted 2 lines
2.26.2
As mentioned earlier, this does need a test that checks the U-Boot code paths. This just seems to be checking the signing process. This likely involves implementing the verification (or a fake of it) in sandbox.
If I am missing something, please let me know.
Regards,
Simon
PATCH v5 6/6 test/py: ecdsa: Add test for mkimage ECDSA signing
Quoted 1 line · Simon Glass
Hi Alexandru,
[snip]
Quoted 6 lines
As mentioned earlier, this does need a test that checks the U-Boot code paths. This just seems to be checking the signing process. This likely involves implementing the verification (or a fake of it) in sandbox.
If I am missing something, please let me know.
Yes! The test runs mkimage -F, which tests the host paths we've added. There's no target u-boot code in this series.
Alex
PATCH v5 6/6 test/py: ecdsa: Add test for mkimage ECDSA signing
In reply to Alexandru GagniucQuoted 7 lines · Alexandru Gagniuc
Add a test to make sure that the ECDSA signatures generated by mkimage can be verified successfully. pyCryptodomex was chosen as the crypto library because it integrates much better with python code. Using openssl would have been unnecessarily painful.
Signed-off-by Alexandru Gagniuc <[email protected]>Reviewed-by Simon Glass <[email protected]>
So, to run this test I've done a "pip install -rtest/py/requirements.txt" to make sure I have everything now needed
installed. When I run this test (building in /tmp):
+/tmp/.bm-work/sandbox/tools/mkimage -F /tmp/.bm-work/sandbox/test.fit -k/tmp/.bm-work/sandbox/ecdsa-test-key.pem Can not get key file '/tmp/.bm-work/sandbox/ecdsa-test-key.pem/dev.pem'
Can not get key file '/tmp/.bm-work/sandbox/ecdsa-test-key.pem/dev.pem'
Failed to sign 'signature' signature node in 'kernel' image node: -2
Failed to sign 'signature' signature node in 'fdt-1' image node: -2
FIT description: Chrome OS kernel image with one or more FDT blobs
...
+fdtget -tbi /tmp/.bm-work/sandbox/test.fit /images/kernel/signature value
Error at 'value': FDT_ERR_NOTFOUND
Which I think means that since we have a key-name-hint of "dev" it's taking the -k argument as a keydir and that's where it goes wrong.
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 659 bytes Desc: not available URL: <https://lists.denx.de/pipermail/u-boot/attachments/20210217/3cf505fd/attachment.sig>
PATCH v5 6/6 test/py: ecdsa: Add test for mkimage ECDSA signing
Quoted 23 lines · Tom Rini
Quoted 7 lines · Alexandru Gagniuc
Add a test to make sure that the ECDSA signatures generated by mkimage can be verified successfully. pyCryptodomex was chosen as the crypto library because it integrates much better with python code. Using openssl would have been unnecessarily painful.
Signed-off-by Alexandru Gagniuc <[email protected]>Reviewed-by Simon Glass <[email protected]>So, to run this test I've done a "pip install -r
test/py/requirements.txt" to make sure I have everything now needed
installed. When I run this test (building in /tmp):
+/tmp/.bm-work/sandbox/tools/mkimage -F/tmp/.bm-work/sandbox/test.fit-k/tmp/.bm-work/sandbox/ecdsa-test-key.pem Can not get key file '/tmp/.bm-work/sandbox/ecdsa-test-key.pem/dev.pem'
Can not get key file '/tmp/.bm-work/sandbox/ecdsa-test-key.pem/dev.pem'
Failed to sign 'signature' signature node in 'kernel' image node: -2
Failed to sign 'signature' signature node in 'fdt-1' image node: -2
FIT description: Chrome OS kernel image with one or more FDT blobs
...
+fdtget -tbi/tmp/.bm-work/sandbox/test.fit/images/kernel/signature value
Error at 'value':FDT_ERR_NOTFOUND
Quoted 2 lines
Which I think means that since we have a key-name-hint of "dev" it's taking the -k argument as a keydir and that's where it goes wrong.
Did this happen with this series alone?
I realize not that also applying "mkimage: Add a 'keyfile' argument for image signing" would cause this. I shoudl have (but forgot to) update the test in that series. I'll update the other series if you want to pull them in together.
Alex
PATCH v5 6/6 test/py: ecdsa: Add test for mkimage ECDSA signing
Quoted 24 lines · Alex G.
Quoted 23 lines · Tom Rini
Quoted 7 lines · Alexandru Gagniuc
Add a test to make sure that the ECDSA signatures generated by mkimage can be verified successfully. pyCryptodomex was chosen as the crypto library because it integrates much better with python code. Using openssl would have been unnecessarily painful.
Signed-off-by Alexandru Gagniuc <[email protected]>Reviewed-by Simon Glass <[email protected]>So, to run this test I've done a "pip install -r
test/py/requirements.txt" to make sure I have everything now needed
installed. When I run this test (building in /tmp):
+/tmp/.bm-work/sandbox/tools/mkimage -F/tmp/.bm-work/sandbox/test.fit-k/tmp/.bm-work/sandbox/ecdsa-test-key.pem Can not get key file '/tmp/.bm-work/sandbox/ecdsa-test-key.pem/dev.pem'
Can not get key file '/tmp/.bm-work/sandbox/ecdsa-test-key.pem/dev.pem'
Failed to sign 'signature' signature node in 'kernel' image node: -2
Failed to sign 'signature' signature node in 'fdt-1' image node: -2
FIT description: Chrome OS kernel image with one or more FDT blobs
...
+fdtget -tbi/tmp/.bm-work/sandbox/test.fit/images/kernel/signature value
Error at 'value':FDT_ERR_NOTFOUND
Quoted 8 lines
Quoted 2 lines
Which I think means that since we have a key-name-hint of "dev" it's taking the -k argument as a keydir and that's where it goes wrong.
Did this happen with this series alone?
I realize not that also applying "mkimage: Add a 'keyfile' argument for image signing" would cause this. I shoudl have (but forgot to) update the test in that series. I'll update the other series if you want to pull them in together.
No, this was with the other series applied as well. In the end, please make sure that yes, the tests all pass. If it's easier to combine both series, that's fine. Thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 659 bytes Desc: not available URL: <https://lists.denx.de/pipermail/u-boot/attachments/20210217/1f1577e8/attachment.sig>