iio: hid-sensor-rotation: Fix quaternion data not correct

Because the data of HID_USAGE_SENSOR_ORIENT_QUATERNION defined by ISH FW is s16, but quaternion data type is in_rot_quaternion_type(le:s16/32X4>>0), need to transform data type from s16 to s32

Fixes fc18dddc0625 ("iio: hid-sensors: Added device rotation support")

Signed-off-by Ye Xiang <[email protected]>

---
v2:
- Add Fixes tag

---
 drivers/iio/orientation/hid-sensor-rotation.c | 13 ++++++++++---
 1 file changed, 10 insertions(+), 3 deletions(-)

drivers/iio/orientation/hid-sensor-rotation.c +10 -3

index b0245b3b7ffc..cf7f57a47681 100644
@@ -21,7 +21,7 @@ struct dev_rot_state {
 	struct hid_sensor_common common_attributes;
 	struct hid_sensor_hub_attribute_info quaternion;
 	struct {
-		u32 sampled_vals[4] __aligned(16);
+		s32 sampled_vals[4] __aligned(16);
 		u64 timestamp __aligned(8);
 	} scan;
 	int scale_pre_decml;

@@ -175,8 +175,15 @@ static int dev_rot_capture_sample(struct hid_sensor_hub_device *hsdev,
 	struct dev_rot_state *rot_state = iio_priv(indio_dev);
 
 	if (usage_id == HID_USAGE_SENSOR_ORIENT_QUATERNION) {
-		memcpy(&rot_state->scan.sampled_vals, raw_data,
-		       sizeof(rot_state->scan.sampled_vals));
+		if (raw_len / 4 == sizeof(s16)) {
+			rot_state->scan.sampled_vals[0] = ((s16 *)raw_data)[0];
+			rot_state->scan.sampled_vals[1] = ((s16 *)raw_data)[1];
+			rot_state->scan.sampled_vals[2] = ((s16 *)raw_data)[2];
+			rot_state->scan.sampled_vals[3] = ((s16 *)raw_data)[3];
+		} else {
+			memcpy(&rot_state->scan.sampled_vals, raw_data,
+			       sizeof(rot_state->scan.sampled_vals));
+		}
 
 		dev_dbg(&indio_dev->dev, "Recd Quat len:%zu::%zu\n", raw_len,
 			sizeof(rot_state->scan.sampled_vals));