SWIOTLB: Preserve swiotlb map offset when needed.
Subsystems (3)
v2 cover SWIOTLB: Preserve swiotlb map offset when needed.
NVMe driver and other applications may depend on the data offset to operate correctly. Currently when unaligned data is mapped via SWIOTLB, the data is mapped as slab aligned with the SWIOTLB. This patch adds an option to make sure the mapped data preserves its offset of the orginal addrss.
Without the patch when creating xfs formatted disk on NVMe backends, with swiotlb=force in kernel boot option, creates the following error:
meta-data=/dev/nvme2n1 isize=512 agcount=4, agsize=131072 blks
= sectsz=512 attr=2, projid32bit=1
= crc=1 finobt=1, sparse=0, rmapbt=0, refl
ink=0
data = bsize=4096 blocks=524288, imaxpct=25
= sunit=0 swidth=0 blks
naming =version 2 bsize=4096 ascii-ci=0 ftype=1
log =internal log bsize=4096 blocks=2560, version=2
= sectsz=512 sunit=0 blks, lazy-count=1
realtime =none extsz=4096 blocks=0, rtextents=0mkfs.xfs: pwrite failed: Input/output error
Jianxiong Gao (3):
Adding page_offset_mask to device_dma_parameters Add swiotlb offset preserving mapping when
dma_dma_parameters->page_offset_mask is non zero.
Adding device_dma_parameters->offset_preserve_mask to NVMe driver.
drivers/nvme/host/pci.c | 4 ++++ include/linux/device.h | 1 + include/linux/dma-mapping.h | 17 +++++++++++++++++ kernel/dma/swiotlb.c | 16 +++++++++++++++- 4 files changed, 37 insertions(+), 1 deletion(-)
Signature · 7 lines
2.27.0 _______________________________________________ Linux-nvme mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-nvme
PATCH v2 1/3 Adding page_offset_mask to device_dma_parameters
Some devices rely on the address offset in a page to function correctly (NVMe driver as an example). These devices may use a different page size than the Linux kernel. The address offset has to be preserved upon mapping, and in order to do so, we need to record the page_offset_mask first.
--- include/linux/device.h | 1 + include/linux/dma-mapping.h | 17 +++++++++++++++++ 2 files changed, 18 insertions(+)
include/linux/device.h +1 -0
@@ -291,6 +291,7 @@ struct device_dma_parameters {* sg limitations. */ unsigned int max_segment_size; +unsigned int min_align_mask;unsigned long segment_boundary_mask; };
include/linux/dma-mapping.h +17 -0
@@ -500,6 +500,23 @@ static inline int dma_set_seg_boundary(struct device *dev, unsigned long mask)return -EIO ; } +static inline unsigned int dma_get_min_align_mask (struct device *dev) +{ +if (dev->dma_parms) +return dev->dma_parms->min_align_mask; +return 0 ; +} + +static inline int dma_set_min_align_mask (struct device *dev, +unsigned int min_align_mask) +{ +if (dev->dma_parms) { + dev->dma_parms->min_align_mask = min_align_mask; +return 0 ; + } +return -EIO ; +} +static inline int dma_get_cache_alignment (void ) {#ifdef ARCH_DMA_MINALIGN
Signature · 7 lines
2.27.0 _______________________________________________ Linux-nvme mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-nvme
PATCH v2 2/3 Add swiotlb offset preserving mapping when dma_dma_parameters->page_offset_mask is non zero.
In reply to Jianxiong GaoFor devices that need to preserve address offset on mapping through swiotlb, this patch adds offset preserving based on page_offset_mask and keeps the offset if the mask is non zero. This is needed for device drivers like NVMe.
--- kernel/dma/swiotlb.c | 27 ++++++++++++++++++++++++--- 1 file changed, 24 insertions(+), 3 deletions(-)
kernel/dma/swiotlb.c +24 -3
@@ -468,7 +468,7 @@ phys_addr_t swiotlb_tbl_map_single(struct device *hwdev, phys_addr_t orig_addr,dma_addr_t tbl_dma_addr =phys_to_dma_unencrypted (hwdev, io_tlb_start);unsigned long flags;phys_addr_t tlb_addr; -unsigned int nslots, stride, index, wrap; +unsigned int nslots, stride, index, wrap, min_align_mask, page_offset;int i;unsigned long mask;unsigned long offset_slots;
@@ -500,12 +500,16 @@ phys_addr_t swiotlb_tbl_map_single(struct device *hwdev, phys_addr_t orig_addr, ?ALIGN (mask +1 ,1 <<IO_TLB_SHIFT ) >>IO_TLB_SHIFT :1UL << (BITS_PER_LONG -IO_TLB_SHIFT ); + min_align_mask =dma_get_min_align_mask (hwdev); + page_offset = orig_addr & min_align_mask; + alloc_size += page_offset; +/* * For mappings greater than or equal to a page, we limit the stride * (and hence alignment) to a page size. */ nslots =ALIGN (alloc_size,1 <<IO_TLB_SHIFT ) >>IO_TLB_SHIFT ; -if (alloc_size >=PAGE_SIZE ) +if ((alloc_size >=PAGE_SIZE ) || (min_align_mask > (1 <<IO_TLB_SHIFT ))) stride = (1 << (PAGE_SHIFT -IO_TLB_SHIFT ));else stride =1 ;
@@ -583,6 +587,11 @@ phys_addr_t swiotlb_tbl_map_single(struct device *hwdev, phys_addr_t orig_addr,*/ for (i =0 ; i < nslots; i++) io_tlb_orig_addr[index+i] = orig_addr + (i <<IO_TLB_SHIFT ); +/* +* When keeping the offset of the original data, we need to advance +* the tlb_addr by the offset of orig_addr. +*/ + tlb_addr += page_offset;if (!(attrs &DMA_ATTR_SKIP_CPU_SYNC ) && (dir ==DMA_TO_DEVICE || dir ==DMA_BIDIRECTIONAL ))swiotlb_bounce (orig_addr, tlb_addr, mapping_size,DMA_TO_DEVICE );
@@ -598,7 +607,11 @@ void swiotlb_tbl_unmap_single(struct device *hwdev, phys_addr_t tlb_addr, enum dma_data_direction dir, unsigned long attrs) {unsigned long flags; -int i, count, nslots =ALIGN (alloc_size,1 <<IO_TLB_SHIFT ) >>IO_TLB_SHIFT ; +unsigned int num_page_offset_slabs; +unsigned int min_align_mask =dma_get_min_align_mask (hwdev); +int i, count; +int nslots =ALIGN (alloc_size + (tlb_addr & min_align_mask), +1 <<IO_TLB_SHIFT ) >>IO_TLB_SHIFT ;int index = (tlb_addr - io_tlb_start) >>IO_TLB_SHIFT ;phys_addr_t orig_addr = io_tlb_orig_addr[index];
@@ -610,6 +623,14 @@ void swiotlb_tbl_unmap_single(struct device *hwdev, phys_addr_t tlb_addr, ((dir == DMA_FROM_DEVICE) || (dir == DMA_BIDIRECTIONAL)))swiotlb_bounce (orig_addr, tlb_addr, mapping_size,DMA_FROM_DEVICE ); +/* +* When dma_get_min_align_mask is used, we may have padded more slabs +* when padding exceeds one slab. We need to move index back to the +* beginning of the padding. +*/ + num_page_offset_slabs = (tlb_addr & min_align_mask) / (1 <<IO_TLB_SHIFT ); + index -= num_page_offset_slabs; +/* * Return the buffer to the free list by setting the corresponding * entries to indicate the number of contiguous entries available.
Signature · 7 lines
2.27.0 _______________________________________________ Linux-nvme mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-nvme
PATCH v2 3/3 Adding device_dma_parameters->offset_preserve_mask to NVMe driver.
In reply to Jianxiong GaoNVMe driver relies on the address offset to function properly. This patch adds the offset preserve mask to NVMe driver when mapping via dma_map_sg_attrs and unmapping via nvme_unmap_sg. The mask depends on the page size defined by CC.MPS register of NVMe controller.
--- drivers/nvme/host/pci.c | 19 +++++++++++++++++-- 1 file changed, 17 insertions(+), 2 deletions(-)
drivers/nvme/host/pci.c +17 -2
@@ -580,12 +580,15 @@ static void nvme_free_sgls(struct nvme_dev *dev, struct request *req)static void nvme_unmap_sg (struct nvme_dev *dev,struct request *req) {struct nvme_iod *iod =blk_mq_rq_to_pdu (req); - +if (dma_set_min_align_mask (dev->dev,NVME_CTRL_PAGE_SIZE -1 )) +dev_warn (dev->dev,"dma_set_min_align_mask failed to set offset\n" );if (is_pci_p2pdma_page (sg_page (iod->sg)))pci_p2pdma_unmap_sg (dev->dev, iod->sg, iod->nents,rq_dma_dir (req));else dma_unmap_sg (dev->dev, iod->sg, iod->nents,rq_dma_dir (req)); +if (dma_set_min_align_mask (dev->dev,0 )) +dev_warn (dev->dev,"dma_set_min_align_mask failed to reset offset\n" ); }static void nvme_unmap_data (struct nvme_dev *dev,struct request *req)
@@ -842,7 +845,7 @@ static blk_status_t nvme_map_data(struct nvme_dev *dev, struct request *req, {struct nvme_iod *iod =blk_mq_rq_to_pdu (req);blk_status_t ret =BLK_STS_RESOURCE ; -int nr_mapped; +int nr_mapped, offset_ret;if (blk_rq_nr_phys_segments (req) ==1 ) {struct bio_vec bv =req_bvec (req);
@@ -868,12 +871,24 @@ static blk_status_t nvme_map_data(struct nvme_dev *dev, struct request *req,if (!iod->nents) goto out_free_sg; + offset_ret =dma_set_min_align_mask (dev->dev,NVME_CTRL_PAGE_SIZE -1 ); +if (offset_ret) { +dev_warn (dev->dev,"dma_set_min_align_mask failed to set offset\n" ); + goto out_free_sg; + } +if (is_pci_p2pdma_page (sg_page (iod->sg))) nr_mapped =pci_p2pdma_map_sg_attrs (dev->dev, iod->sg, iod->nents,rq_dma_dir (req),DMA_ATTR_NO_WARN );else nr_mapped =dma_map_sg_attrs (dev->dev, iod->sg, iod->nents,rq_dma_dir (req),DMA_ATTR_NO_WARN ); + + offset_ret =dma_set_min_align_mask (dev->dev,0 ); +if (offset_ret) { +dev_warn (dev->dev,"dma_set_min_align_mask failed to reset offset\n" ); + goto out_free_sg; + }if (!nr_mapped) goto out_free_sg;
Signature · 7 lines
2.27.0 _______________________________________________ Linux-nvme mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-nvme
Re: [PATCH V2 3/3] Adding device_dma_parameters->offset_preserve_mask to NVMe driver.
Quoted 5 lines · Jianxiong Gao
NVMe driver relies on the address offset to function properly. This patch adds the offset preserve mask to NVMe driver when mapping via
dma_map_sg_attrsand unmapping vianvme_unmap_sg. The mask depends on the page size defined by CC.MPS register of NVMe controller.
...
drivers/nvme/host/pci.c static blk_status_t nvme_map_data(struct nvme_dev *dev, struct request *req, · line 891
Quoted 12 lines
drivers/nvme/host/pci.c +6
-0if (is_pci_p2pdma_page (sg_page (iod->sg))) nr_mapped =pci_p2pdma_map_sg_attrs (dev->dev, iod->sg, iod->nents,rq_dma_dir (req),DMA_ATTR_NO_WARN );else nr_mapped =dma_map_sg_attrs (dev->dev, iod->sg, iod->nents,rq_dma_dir (req),DMA_ATTR_NO_WARN ); + + offset_ret =dma_set_min_align_mask (dev->dev,0 ); +if (offset_ret) { +dev_warn (dev->dev,"dma_set_min_align_mask failed to reset offset\n" ); + goto out_free_sg; + }
Seems like rebasing effect which makes empty line goes in the middle of some other group of code lines.
drivers/nvme/host/pci.c static blk_status_t nvme_map_data(struct nvme_dev *dev, struct request *req, · line 893
Quoted 2 lines
drivers/nvme/host/pci.c +0
-0if (!nr_mapped) goto out_free_sg;
Perhaps it should be here?
Signature · 8 lines
With Best Regards, Andy Shevchenko _______________________________________________ iommu mailing list [email protected] https://lists.linuxfoundation.org/mailman/listinfo/iommu
Re: [PATCH V2 3/3] Adding device_dma_parameters->offset_preserve_mask to NVMe driver.
Quoted 23 lines · Andy Shevchenko
Quoted 5 lines · Jianxiong Gao
NVMe driver relies on the address offset to function properly. This patch adds the offset preserve mask to NVMe driver when mapping via
dma_map_sg_attrsand unmapping vianvme_unmap_sg. The mask depends on the page size defined by CC.MPS register of NVMe controller....
drivers/nvme/host/pci.c static blk_status_t nvme_map_data(struct nvme_dev *dev, struct request *req, · line 891
Quoted 12 lines
if (is_pci_p2pdma_page(sg_page(iod->sg))) nr_mapped = pci_p2pdma_map_sg_attrs(dev->dev, iod->sg, iod->nents, rq_dma_dir(req), DMA_ATTR_NO_WARN); else nr_mapped = dma_map_sg_attrs(dev->dev, iod->sg, iod->nents, rq_dma_dir(req), DMA_ATTR_NO_WARN);drivers/nvme/host/pci.c +6
-0+ + offset_ret =dma_set_min_align_mask (dev->dev,0 ); +if (offset_ret) { +dev_warn (dev->dev,"dma_set_min_align_mask failed to reset offset\n" ); + goto out_free_sg; + }
Quoted 7 lines
Seems like rebasing effect which makes empty line goes in the middle of some other group of code lines.
Quoted 2 lines
if (!nr_mapped) goto out_free_sg;Perhaps it should be here?
Yes you are correct, it should be
else
nr_mapped = dma_map_sg_attrs(dev->dev, iod->sg, iod->nents,
rq_dma_dir(req), DMA_ATTR_NO_WARN);
if (!nr_mapped)
goto out_free_sg;+
+ offset_ret = dma_set_min_align_mask(dev->dev, 0);
+ if (offset_ret) {
+ dev_warn(dev->dev, "dma_set_min_align_mask failed to
reset offset\n");
+ goto out_free_sg;
+ }
Thanks for pointing it out.
Quoted 6 lines
--
With Best Regards,
Andy Shevchenko
Signature · 5 lines
Jianxiong Gao _______________________________________________ iommu mailing list [email protected] https://lists.linuxfoundation.org/mailman/listinfo/iommu
Keith Busch
maintainerRe: [PATCH V2 3/3] Adding device_dma_parameters->offset_preserve_mask to NVMe driver.
In reply to Jianxiong GaoQuoted 14 lines · Jianxiong Gao
drivers/nvme/host/pci.c +6
-0@@ -868,12 +871,24 @@ static blk_status_t nvme_map_data(struct nvme_dev *dev, struct request *req,if (!iod->nents) goto out_free_sg; + offset_ret =dma_set_min_align_mask (dev->dev,NVME_CTRL_PAGE_SIZE -1 ); +if (offset_ret) { +dev_warn (dev->dev,"dma_set_min_align_mask failed to set offset\n" ); + goto out_free_sg; + } +if (is_pci_p2pdma_page (sg_page (iod->sg))) nr_mapped =pci_p2pdma_map_sg_attrs (dev->dev, iod->sg, iod->nents,rq_dma_dir (req),DMA_ATTR_NO_WARN );else
drivers/nvme/host/pci.c static blk_status_t nvme_map_data(struct nvme_dev *dev, struct request *req, · line 893
Quoted 10 lines
drivers/nvme/host/pci.c +6
-0nr_mapped =dma_map_sg_attrs (dev->dev, iod->sg, iod->nents,rq_dma_dir (req),DMA_ATTR_NO_WARN ); + + offset_ret =dma_set_min_align_mask (dev->dev,0 ); +if (offset_ret) { +dev_warn (dev->dev,"dma_set_min_align_mask failed to reset offset\n" ); + goto out_free_sg; + }if (!nr_mapped) goto out_free_sg;
Why is this setting being done and undone on each IO? Wouldn't it be more efficient to set it once during device initialization?
And more importantly, this isn't thread safe: one CPU may be setting the device's dma alignment mask to 0 while another CPU is expecting it to be NVME_CTRL_PAGE_SIZE - 1.
_______________________________________________
iommu mailing list
[email protected]
https://lists.linuxfoundation.org/mailman/listinfo/iommu
Re: [PATCH V2 3/3] Adding device_dma_parameters->offset_preserve_mask to NVMe driver.
Quoted 33 lines · Jianxiong Gao
Review static blk_status_t nvme_map_data(struct nvme_dev
Quoted 1 line
(quoted diff) +0
-0@@ -868,12 +871,24 @@ static blk_status_t nvme_map_data(struct nvme_dev*dev, struct request *req,
drivers/nvme/host/pci.c static blk_status_t nvme_map_data(struct nvme_dev *dev, struct request *req,
Quoted 4 lines
drivers/nvme/host/pci.c +1
-0if (!iod->nents) goto out_free_sg; + offset_ret = dma_set_min_align_mask(dev->dev, NVME_CTRL_PAGE_SIZE- 1);
Review static blk_status_t nvme_map_data(struct nvme_dev · line 876
Quoted 2 lines
(quoted diff) +2
-0+ if (offset_ret) { + dev_warn(dev->dev, "dma_set_min_align_mask failed to setoffset\n");
drivers/nvme/host/pci.c static blk_status_t nvme_map_data(struct nvme_dev *dev, struct request *req,
Quoted 6 lines
drivers/nvme/host/pci.c +3
-0+ goto out_free_sg; + } +if (is_pci_p2pdma_page (sg_page (iod->sg))) nr_mapped = pci_p2pdma_map_sg_attrs(dev->dev, iod->sg, iod->nents, rq_dma_dir(req),
DMA_ATTR_NO_WARN);drivers/nvme/host/pci.c static blk_status_t nvme_map_data(struct nvme_dev *dev, struct request *req,
Quoted 3 lines
drivers/nvme/host/pci.c +0
-0else nr_mapped = dma_map_sg_attrs(dev->dev, iod->sg, iod->nents, rq_dma_dir(req),
DMA_ATTR_NO_WARN);drivers/nvme/host/pci.c static blk_status_t nvme_map_data(struct nvme_dev *dev, struct request *req,
Quoted 4 lines
drivers/nvme/host/pci.c +4
-0+ + offset_ret =dma_set_min_align_mask (dev->dev,0 ); +if (offset_ret) { + dev_warn(dev->dev, "dma_set_min_align_mask failed to resetoffset\n");
drivers/nvme/host/pci.c static blk_status_t nvme_map_data(struct nvme_dev *dev, struct request *req, · line 893
Quoted 4 lines
drivers/nvme/host/pci.c +2
-0+ goto out_free_sg; + }if (!nr_mapped) goto out_free_sg;
Quoted 7 lines
Why is this setting being done and undone on each IO? Wouldn't it be more efficient to set it once during device initialization?
And more importantly, this isn't thread safe: one CPU may be setting the device's dma alignment mask to 0 while another CPU is expecting it to be
NVME_CTRL_PAGE_SIZE- 1.
I was having trouble getting the OS booted when setting it once during initialization. However when I rebased to the latest rc6 this morning it seems to be working with setting the mask on probe. I am still testing out and will appreciate any idea what may cause the nvme driver to fail with a single mask.
Signature · 1 line
Jianxiong Gao
_______________________________________________
iommu mailing list
[email protected]
https://lists.linuxfoundation.org/mailman/listinfo/iommu
Re: [PATCH V2 3/3] Adding device_dma_parameters->offset_preserve_mask to NVMe driver.
Quoted 6 lines
Why is this setting being done and undone on each IO? Wouldn't it be more efficient to set it once during device initialization?
And more importantly, this isn't thread safe: one CPU may be setting the device's dma alignment mask to 0 while another CPU is expecting it to be
NVME_CTRL_PAGE_SIZE- 1.
I was having trouble getting the OS booted when setting it once during initialization. However when I rebased to the latest rc6 this morning it seems to be working with setting the mask on probe. I am still testing out and will appreciate any idea what may cause the nvme driver to fail with a single mask.
Signature · 5 lines
Jianxiong Gao _______________________________________________ iommu mailing list [email protected] https://lists.linuxfoundation.org/mailman/listinfo/iommu
Re: [PATCH V2 3/3] Adding device_dma_parameters->offset_preserve_mask to NVMe driver.
Quoted 11 lines · Jianxiong Gao
Quoted 6 lines
Why is this setting being done and undone on each IO? Wouldn't it be more efficient to set it once during device initialization?
And more importantly, this isn't thread safe: one CPU may be setting the device's dma alignment mask to 0 while another CPU is expecting it to be
NVME_CTRL_PAGE_SIZE- 1.I was having trouble getting the OS booted when setting it once during initialization. However when I rebased to the latest rc6 this morning it seems to be working with setting the mask on probe. I am still testing out and will appreciate any idea what may cause the nvme driver to fail with a single mask.
Based on the Keith's comment it needs to be completely avoided in hot path.
Did you get a chance to bisect the problem in the rc6 ? We need to know the root cause otherwise it might happen again after we add this patch.
_______________________________________________
Linux-nvme mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-nvme
Re: [PATCH V2 3/3] Adding device_dma_parameters->offset_preserve_mask to NVMe driver.
In reply to Jianxiong GaoQuoted 2 lines
Why is this setting being done and undone on each IO? Wouldn't it be more efficient to set it once during device initialization?
I agree that setting it once is the right way of doing it.
So I have changed the patch to enable the mask once in nvme_probe.
drivers/nvme/host/pci.c | 3 +++ 1 file changed, 3 insertions(+)
drivers/nvme/host/pci.c +2 -0
@@ -2630,6 +2630,9 @@ static void nvme_reset_work(struct work_struct *work)*/ dma_set_max_seg_size (dev->dev,0xffffffff ); +if (dma_set_min_align_mask (dev->dev,NVME_CTRL_PAGE_SIZE -1 )) + dev_warn(dev->dev, "dma_set_min_align_mask failed to
set offset\n");
+
mutex_unlock(&dev->shutdown_lock);
/*However on boot of the system, the following error happens occasionally. The error seems related to Journal service. Whenever "Stopping Journal Service..."
appears, the boot succeeds. Otherwise boot fails with the following message.
----------------------------log start here-------------------------- [ OK ] Started Journal Service.
[ 10.774545] xfs filesystem being remounted at / supports timestamps
until 2038 (0x7fffffff)
[ OK ] Started Remount Root and Kernel File Systems.
Starting Flush Journal to Persistent Storage... Starting Load/Save Random Seed...
Starting Create Static [ 10.804340] systemd-journald[780]:
Received request to flush runtime journal from PID 1 Device Nodes in /dev...
[ OK ] Started Load/Save Random Seed. [ OK ] Started Flush Journal to Persistent Storage. [ OK ] Started Create Static Device Nodes in /dev.
Starting udev Kernel Device Manager...
[ OK ] Reached target Local File Systems (Pre).
Starting File System Check on /dev/disk/by-uuid/7281-17FC...
[ OK ] Started File System Check on /dev/disk/by-uuid/7281-17FC.
Mounting /boot/efi...
[ OK ] Mounted /boo[ 11.203461] systemd[1]: segfault at 2e0 ip000055b08607cc24 sp 00007ffe13809090 error 4 in systemd[55b086000000+140000]
t/efi.
[ 11.216088] Code: 02 c7 44 24 10 fe ff ff ff 49 89 e4 89 06 48 8d
6c 24 08 48 8d 5c 24 10 48 c7 44 24 18 00 00 00 00 eb 10 0f 1f 00 48 8b 3c 24 <44> 39 b7 e0 02 00 00 74 3b 49 8b 7d 00 4c 89 e1 48 89 ea 48 89 de
---------------log ends here-----------
Quoted 4 lines
Based on the Keith's comment it needs to be completely avoided in hot path.
Did you get a chance to bisect the problem in the rc6 ? We need to know the root cause otherwise it might happen again after we add this patch.
I am now trying to bisect the problem.
I am not sure how the mapping offset could have caused the error. Any suggestions are appreciated.
--
Jianxiong Gao
_______________________________________________
iommu mailing list
[email protected]
https://lists.linuxfoundation.org/mailman/listinfo/iommu
Re: [PATCH V2 3/3] Adding device_dma_parameters->offset_preserve_mask to NVMe driver.
Quoted 1 line · Jianxiong Gao
+ if (
dma_set_min_align_mask(dev->dev, NVME_CTRL_PAGE_SIZE - 1))
Side note: we have DMA_BIT_MASK(), please use it.
Quoted 2 lines
+ dev_warn(dev->dev, "
dma_set_min_align_maskfailed to
set offset\n");
Signature · 8 lines
With Best Regards, Andy Shevchenko _______________________________________________ iommu mailing list [email protected] https://lists.linuxfoundation.org/mailman/listinfo/iommu
Robin Murphy
reviewerRe: [PATCH V2 3/3] Adding device_dma_parameters->offset_preserve_mask to NVMe driver.
Quoted 5 lines · Andy Shevchenko
Quoted 1 line · Jianxiong Gao
+ if (
dma_set_min_align_mask(dev->dev, NVME_CTRL_PAGE_SIZE - 1))Side note: we have
DMA_BIT_MASK(), please use it.
FWIW I'd actually disagree on that point. Conceptually, this is a very different thing from dev->{coherent_}dma_mask. It does not need to handle everything up to 2^64-1 correctly without overflow issues, and data alignments typically *are* defined in terms of sizes rather than numbers of bits.
In fact, it might be neat to just have callers pass a size directly to a dma_set_min_align() interface which asserts that it is a power of two and stores it as a mask internally.
Robin.
Quoted 4 lines
Quoted 3 lines
+ dev_warn(dev->dev, "
dma_set_min_align_maskfailed to
set offset\n");
_______________________________________________
iommu mailing list
[email protected]
https://lists.linuxfoundation.org/mailman/listinfo/iommu
Christoph Hellwig
maintainerRe: [PATCH V2 3/3] Adding device_dma_parameters->offset_preserve_mask to NVMe driver.
In reply to Jianxiong GaoPlease try with this extra patch:
---
From 212764c3c15ce859e6f55d2146f450ea4ca6fdb9 Mon Sep 17 00:00:00 2001
From: Christoph Hellwig <[email protected]>
Date: Wed, 3 Feb 2021 14:27:13 +0100
Subject: nvme-pci: fix 2nd PRP setup in nvme_setup_prp_simple
Use the dma address instead of the bio_vec offset for the arithmetics to find the address for the 2nd PRP.
--- drivers/nvme/host/pci.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
drivers/nvme/host/pci.c +4 -4
@@ -808,8 +808,7 @@ static blk_status_t nvme_setup_prp_simple(struct nvme_dev *dev, struct bio_vec *bv) {struct nvme_iod *iod =blk_mq_rq_to_pdu (req); -unsigned int offset = bv->bv_offset & (NVME_CTRL_PAGE_SIZE -1 ); -unsigned int first_prp_len =NVME_CTRL_PAGE_SIZE - offset; +dma_addr_t next_prp; iod->first_dma =dma_map_bvec (dev->dev, bv,rq_dma_dir (req),0 );if (dma_mapping_error (dev->dev, iod->first_dma))
@@ -817,8 +816,9 @@ static blk_status_t nvme_setup_prp_simple(struct nvme_dev *dev, iod->dma_len = bv->bv_len; cmnd->dptr.prp1 =cpu_to_le64 (iod->first_dma); -if (bv->bv_len > first_prp_len) - cmnd->dptr.prp2 =cpu_to_le64 (iod->first_dma + first_prp_len); + next_prp =round_down (iod->first_dma + bv->bv_len,NVME_CTRL_PAGE_SIZE ); +if (next_prp > iod->first_dma) + cmnd->dptr.prp2 =cpu_to_le64 (next_prp);return BLK_STS_OK ; }
Signature · 6 lines
2.29.2 _______________________________________________ iommu mailing list [email protected] https://lists.linuxfoundation.org/mailman/listinfo/iommu
Re: [PATCH V2 3/3] Adding device_dma_parameters->offset_preserve_mask to NVMe driver.
Quoted 3 lines
Please try with this extra patch:
I have tried with the extra patch and it still fails to boot. I have attached dmesg output for the error:
-------------dmesg starts here-----------------
[ 6.357755] XFS (nvme0n1p2): Mounting V5 Filesystem [ 6.430092] XFS (nvme0n1p2): Torn write (CRC failure) detected at log block 0x20d0. Truncating head block from 0x20e0. [ 6.442828] XFS (nvme0n1p2): Starting recovery (logdev: internal) [ 7.272456] XFS (nvme0n1p2): Ending recovery (logdev: internal) [ 7.610250] systemd-journald[434]: Received SIGTERM from PID 1 (systemd). ... [ 10.054121] systemd[755]: /usr/lib/systemd/system-generators/systemd-rc-local-generator terminated by signal ABRT. [ 10.726122] audit: type=1400 audit(1612370261.090:4): avc: denied
{ search } for pid=783 comm="systemd-sysctl" name="crash" dev="nvme0n1p2" ino=50789805 scontext=system_u:system_r:systemd_sysctl_t:s0 tcontext=system_u:object_r:kdump_crash_t:s0 tclass=dir permissive=0
[ 10.751764] audit: type=1400 audit(1612370261.090:5): avc: denied
{ search } for pid=783 comm="systemd-sysctl" name="crash" dev="nvme0n1p2" ino=50789805 scontext=system_u:system_r:systemd_sysctl_t:s0 tcontext=system_u:object_r:kdump_crash_t:s0 tclass=dir permissive=0
[ 12.366607] xfs filesystem being remounted at / supports timestamps
until 2038 (0x7fffffff)
[ 12.376379] audit: type=1400 audit(1612370262.740:6): avc: denied
{ write } for pid=788 comm="systemd-remount" name="crash"
dev="nvme0n1p2" ino=50789805 scontext=system_u:system_r:init_t:s0
tcontext=system_u:object_r:kdump_crash_t:s0 tclass=dir permissive=0
[ 12.413155] systemd-journald[781]: Received request to flush
runtime journal from PID 1
[ 12.428917] audit: type=1400 audit(1612370262.793:7): avc: denied
{ write } for pid=815 comm="journalctl" name="crash" dev="nvme0n1p2"
ino=50789805 scontext=system_u:system_r:init_t:s0
tcontext=system_u:object_r:kdump_crash_t:s0 tclass=dir permissive=0
[ 12.453006] audit: type=1400 audit(1612370262.799:8): avc: denied
{ write } for pid=817 comm="systemd-random-" name="crash"
dev="nvme0n1p2" ino=50789805 scontext=system_u:system_r:init_t:s0
tcontext=system_u:object_r:kdump_crash_t:s0 tclass=dir permissive=0
[ 13.306030] plymouth[853]: segfault at 0 ip 00007f2eabca8090 sp
00007fffe94d8c08 error 6 in libc-2.28.so[7f2eabbcd000+1b9000]
[ 13.318772] Code: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 <00> 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00
[ 78.782418] sed[911]: segfault at 0 ip 00007fc3540da090 sp
00007ffdb4373ff8 error 6 in libc-2.28.so[7fc353fff000+1b9000]
[ 78.794007] Code: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <00> 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
--------------dmesg ends here-----------
Signature · 5 lines
Jianxiong Gao _______________________________________________ iommu mailing list [email protected] https://lists.linuxfoundation.org/mailman/listinfo/iommu
Greg KH
maintainerQuoted 23 lines · Jianxiong Gao
NVMe driver and other applications may depend on the data offset to operate correctly. Currently when unaligned data is mapped via SWIOTLB, the data is mapped as slab aligned with the SWIOTLB. This patch adds an option to make sure the mapped data preserves its offset of the orginal addrss.
Without the patch when creating xfs formatted disk on NVMe backends, with swiotlb=force in kernel boot option, creates the following error:
meta-data=/dev/nvme2n1 isize=512 agcount=4, agsize=131072 blks = sectsz=512 attr=2, projid32bit=1 = crc=1 finobt=1, sparse=0, rmapbt=0, refl ink=0 data = bsize=4096 blocks=524288, imaxpct=25 = sunit=0 swidth=0 blks naming =version 2 bsize=4096 ascii-ci=0 ftype=1 log =internal log bsize=4096 blocks=2560, version=2 = sectsz=512 sunit=0 blks, lazy-count=1 realtime =none extsz=4096 blocks=0, rtextents=0mkfs.xfs: pwrite failed: Input/output error
Jianxiong Gao (3):
Addingpage_offset_masktodevice_dma_parametersAdd swiotlb offset preserving mapping when
Quoted 12 lines
dma_dma_parameters->page_offset_mask is non zero.Adding
device_dma_parameters->offset_preserve_maskto NVMe driver.drivers/nvme/host/pci.c | 4 ++++ include/linux/device.h | 1 + include/linux/dma-mapping.h | 17 +++++++++++++++++ kernel/dma/swiotlb.c | 16 +++++++++++++++- 4 files changed, 37 insertions(+), 1 deletion(-)Signature · 1 line
2.27.0
You forgot to mention somewhere, what changed from v1 to v2 :(
_______________________________________________
iommu mailing list
[email protected]
https://lists.linuxfoundation.org/mailman/listinfo/iommu