Skip to contentSkip to conversation

dt-bindings: mtd: spi-nor: Convert to DT schema format

PATCH Applied Rob Herring 2 participants 3 messages Feb 2, 2021 – Feb 16, 2021

Subsystems (3)
lore
Share & tools
lore

Rob Herring

author maintainer
#0 lore raw

PATCH 1/1 dt-bindings: mtd: spi-nor: Convert to DT schema format

Convert the SPI-NOR binding to DT schema format. Like other memory chips, the compatible strings are a mess with vendor prefixes not being used consistently and some compatibles not documented. The resulting schema passes on 'compatible' checks for most in tree users with the exception of some oddballs.

I dropped the 'm25p.*-nonjedec' compatible strings as these don't appear to be used anywhere.

Cc Miquel Raynal <[email protected]>
Cc Richard Weinberger <[email protected]>
Cc Vignesh Raghavendra <[email protected]>
---
 .../devicetree/bindings/mtd/jedec,spi-nor.txt |  91 ----------------
 .../bindings/mtd/jedec,spi-nor.yaml           | 102 ++++++++++++++++++
 2 files changed, 102 insertions(+), 91 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/mtd/jedec,spi-nor.txt
 create mode 100644 Documentation/devicetree/bindings/mtd/jedec,spi-nor.yaml
Documentation/devicetree/bindings/mtd/jedec,spi-nor.txt deleted +0 -91
deleted file mode 100644
index f03be904d3c2..000000000000
@@ -1,91 +0,0 @@
-* SPI NOR flash: ST M25Pxx (and similar) serial flash chips
-
-Required properties:
-- #address-cells, #size-cells : Must be present if the device has sub-nodes
-  representing partitions.
-- compatible : May include a device-specific string consisting of the
-               manufacturer and name of the chip. A list of supported chip
-               names follows.
-               Must also include "jedec,spi-nor" for any SPI NOR flash that can
-               be identified by the JEDEC READ ID opcode (0x9F).
-
-               Supported chip names:
-                 at25df321a
-                 at25df641
-                 at26df081a
-                 mr25h128
-                 mr25h256
-                 mr25h10
-                 mr25h40
-                 mx25l4005a
-                 mx25l1606e
-                 mx25l6405d
-                 mx25l12805d
-                 mx25l25635e
-                 n25q064
-                 n25q128a11
-                 n25q128a13
-                 n25q512a
-                 s25fl256s1
-                 s25fl512s
-                 s25sl12801
-                 s25fl008k
-                 s25fl064k
-                 sst25vf040b
-                 m25p40
-                 m25p80
-                 m25p16
-                 m25p32
-                 m25p64
-                 m25p128
-                 w25x80
-                 w25x32
-                 w25q32
-                 w25q64
-                 w25q32dw
-                 w25q80bl
-                 w25q128
-                 w25q256
-
-               The following chip names have been used historically to
-               designate quirky versions of flash chips that do not support the
-               JEDEC READ ID opcode (0x9F):
-                 m25p05-nonjedec
-                 m25p10-nonjedec
-                 m25p20-nonjedec
-                 m25p40-nonjedec
-                 m25p80-nonjedec
-                 m25p16-nonjedec
-                 m25p32-nonjedec
-                 m25p64-nonjedec
-                 m25p128-nonjedec
-
-- reg : Chip-Select number
-- spi-max-frequency : Maximum frequency of the SPI bus the chip can operate at
-
-Optional properties:
-- m25p,fast-read : Use the "fast read" opcode to read data from the chip instead
-                   of the usual "read" opcode. This opcode is not supported by
-                   all chips and support for it can not be detected at runtime.
-                   Refer to your chips' datasheet to check if this is supported
-                   by your chip.
-- broken-flash-reset : Some flash devices utilize stateful addressing modes
-		   (e.g., for 32-bit addressing) which need to be managed
-		   carefully by a system. Because these sorts of flash don't
-		   have a standardized software reset command, and because some
-		   systems don't toggle the flash RESET# pin upon system reset
-		   (if the pin even exists at all), there are systems which
-		   cannot reboot properly if the flash is left in the "wrong"
-		   state. This boolean flag can be used on such systems, to
-		   denote the absence of a reliable reset mechanism.
-
-Example:
-
-	flash: m25p80@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "spansion,m25p80", "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <40000000>;
-		m25p,fast-read;
-	};
Documentation/devicetree/bindings/mtd/jedec,spi-nor.yaml new file +102 -0

102 lines not on this page · raw message

Signature · 6 lines
2.27.0


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
author maintainer Applied
#1 lore raw
Quoted 14 lines · Rob Herring

Convert the SPI-NOR binding to DT schema format. Like other memory chips, the compatible strings are a mess with vendor prefixes not being used consistently and some compatibles not documented. The resulting schema passes on 'compatible' checks for most in tree users with the exception of some oddballs.

I dropped the 'm25p.*-nonjedec' compatible strings as these don't appear to be used anywhere.

Cc Miquel Raynal <[email protected]>
Cc Richard Weinberger <[email protected]>
Cc Vignesh Raghavendra <[email protected]>
Quoted 7 lines
---
 .../devicetree/bindings/mtd/jedec,spi-nor.txt |  91 ----------------
 .../bindings/mtd/jedec,spi-nor.yaml           | 102 ++++++++++++++++++
 2 files changed, 102 insertions(+), 91 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/mtd/jedec,spi-nor.txt
 create mode 100644 Documentation/devicetree/bindings/mtd/jedec,spi-nor.yaml

Applied, thanks!

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

#2 lore raw
In reply to Rob Herring

Hi Rob,

Quoted 6 lines · Rob Herring

Convert the SPI-NOR binding to DT schema format. Like other memory chips, the compatible strings are a mess with vendor prefixes not being used consistently and some compatibles not documented. The resulting schema passes on 'compatible' checks for most in tree users with the exception of some oddballs.

Quoted 8 lines

I dropped the 'm25p.*-nonjedec' compatible strings as these don't appear to be used anywhere.

Cc Miquel Raynal <[email protected]>
Cc Richard Weinberger <[email protected]>
Cc Vignesh Raghavendra <[email protected]>

Thanks for your patch!

Quoted 36 lines
Documentation/devicetree/bindings/mtd/jedec,spi-nor.yaml new file +33 -0
@@ -0,0 +1,102 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/jedec,spi-nor.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SPI NOR flash ST M25Pxx (and similar) serial flash chips
+
+maintainers:
+  - Rob Herring <[email protected]>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - pattern: "^((((micron|spansion|st),)?\
+              (m25p(40|80|16|32|64|128)|\
+              n25q(32b|064|128a11|128a13|256a|512a|164k)))|\
+              atmel,at25df(321a|641|081a)|\
+              everspin,mr25h(10|40|128|256)|\
+              (mxicy|macronix),mx25l(4005a|1606e|6405d|8005|12805d|25635e)|\
+              (mxicy|macronix),mx25u(4033|4035)|\
+              (spansion,)?s25fl(128s|256s1|512s|008k|064k|164k)|\
+              (sst|microchip),sst25vf(016b|032b|040b)|\
+              (sst,)?sst26wf016b|\
+              (sst,)?sst25wf(040b|080)|\
+              winbond,w25x(80|32)|\
+              (winbond,)?w25q(16|32(w|dw)?|64(dw)?|80bl|128(fw)?|256))$"
+          - const: jedec,spi-nor
+      - items:
+          - enum:
+              - issi,is25lp016d
+              - micron,mt25qu02g

Documentation/devicetree/bindings/mtd/jedec,spi-nor.yaml line 43

Quoted 10 lines
Documentation/devicetree/bindings/mtd/jedec,spi-nor.yaml new file +10 -0
+              - mxicy,mx25r1635f
+              - mxicy,mx25u6435f
+              - mxicy,mx25v8035f
+              - spansion,s25sl12801
+              - spansion,s25fs512s
+          - const: jedec,spi-nor
+      - const: jedec,spi-nor
+    description:
+      Must also include "jedec,spi-nor" for any SPI NOR flash that can be
+      identified by the JEDEC READ ID opcode (0x9F).

Is there any value in keeping this paragraph?
The schema already requires "jedec,spi-nor".

Gr{oetje,eeting}s,

Geert

Signature · 9 lines
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- [email protected]

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/