Skip to contentSkip to conversation

dma-buf: dma-heap: Provide accessor to get heap name

RFC PATCH Superseded John Stultz 4 participants 9 messages Feb 6, 2021 – Feb 9, 2021

Subsystems (3)

v1 of 2 Superseded Latest is v2 →

lore
Share & tools
lore
#0 lore raw

RFC PATCH 1/2 dma-buf: dma-heap: Provide accessor to get heap name

It can be useful to access the name for the heap, so provide an accessor to do so.

Cc Daniel Vetter <[email protected]>
Cc Sumit Semwal <[email protected]>
Cc Liam Mark <[email protected]>
Cc Chris Goldsworthy <[email protected]>
Cc Laura Abbott <[email protected]>
Cc Brian Starkey <[email protected]>
Cc Hridya Valsaraju <[email protected]>
Cc Suren Baghdasaryan <[email protected]>
Cc Sandeep Patil <[email protected]>
Cc Daniel Mentz <[email protected]>
Cc Ørjan Eide <[email protected]>
Cc Robin Murphy <[email protected]>
Cc Ezequiel Garcia <[email protected]>
Cc Simon Ser <[email protected]>
Cc James Jones <[email protected]>
---
 drivers/dma-buf/dma-heap.c | 13 +++++++++++++
 include/linux/dma-heap.h   |  9 +++++++++
 2 files changed, 22 insertions(+)
drivers/dma-buf/dma-heap.c +13 -0
index afd22c9dbdcf..6c746ea67676 100644
@@ -190,6 +190,19 @@ void *dma_heap_get_drvdata(struct dma_heap *heap)
 	return heap->priv;
 }
 
+
+/**
+ * dma_heap_get_name() - get heap name
+ * @heap: DMA-Heap to retrieve private data for
+ *
+ * Returns:
+ * The char* for the heap name.
+ */
+char *dma_heap_get_name(struct dma_heap *heap)
+{
+	return heap->name;
+}
+
 struct dma_heap *dma_heap_add(const struct dma_heap_export_info *exp_info)
 {
 	struct dma_heap *heap, *h, *err_ret;
include/linux/dma-heap.h +9 -0
index 454e354d1ffb..b91778291fb1 100644
@@ -50,6 +50,15 @@ struct dma_heap_export_info {
  */
 void *dma_heap_get_drvdata(struct dma_heap *heap);
 
+/**
+ * dma_heap_get_name() - get heap name
+ * @heap: DMA-Heap to retrieve private data for
+ *
+ * Returns:
+ * The char* for the heap name.
+ */
+char *dma_heap_get_name(struct dma_heap *heap);
+
 /**
  * dma_heap_add - adds a heap to dmabuf heaps
  * @exp_info:		information needed to register this heap
Signature · 6 lines
2.25.1

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
#1 lore raw

RFC PATCH 2/2 dma-buf: heaps: Fix the name used when exporting dmabufs to be the actual heap name

By default dma_buf_export() sets the exporter name to be KBUILD_MODNAME. Unfortunately this may not be identical to the string used as the heap name (ie: "system" vs "system_heap").

This can cause some minor confusion with tooling, and there is the future potential where multiple heap types may be exported by the same module (but would all have the same name).

So to avoid all this, set the exporter exp_name to the heap name.

Cc Daniel Vetter <[email protected]>
Cc Sumit Semwal <[email protected]>
Cc Liam Mark <[email protected]>
Cc Chris Goldsworthy <[email protected]>
Cc Laura Abbott <[email protected]>
Cc Brian Starkey <[email protected]>
Cc Hridya Valsaraju <[email protected]>
Cc Suren Baghdasaryan <[email protected]>
Cc Sandeep Patil <[email protected]>
Cc Daniel Mentz <[email protected]>
Cc Ørjan Eide <[email protected]>
Cc Robin Murphy <[email protected]>
Cc Ezequiel Garcia <[email protected]>
Cc Simon Ser <[email protected]>
Cc James Jones <[email protected]>
---
 drivers/dma-buf/heaps/cma_heap.c    | 1 +
 drivers/dma-buf/heaps/system_heap.c | 1 +
 2 files changed, 2 insertions(+)
drivers/dma-buf/heaps/cma_heap.c +1 -0
index 364fc2f3e499..62465d61ccc7 100644
@@ -339,6 +339,7 @@ static int cma_heap_allocate(struct dma_heap *heap,
 	buffer->pagecount = pagecount;
 
 	/* create the dmabuf */
+	exp_info.exp_name = dma_heap_get_name(heap);
 	exp_info.ops = &cma_heap_buf_ops;
 	exp_info.size = buffer->len;
 	exp_info.flags = fd_flags;
drivers/dma-buf/heaps/system_heap.c +1 -0
index 17e0e9a68baf..2d4afc79c700 100644
@@ -388,6 +388,7 @@ static int system_heap_allocate(struct dma_heap *heap,
 	}
 
 	/* create the dmabuf */
+	exp_info.exp_name = dma_heap_get_name(heap);
 	exp_info.ops = &system_heap_buf_ops;
 	exp_info.size = buffer->len;
 	exp_info.flags = fd_flags;
Signature · 6 lines
2.25.1

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
#2 lore raw

Re: [RFC][PATCH 2/2] dma-buf: heaps: Fix the name used when exporting dmabufs to be the actual heap name

Quoted 20 lines · John Stultz

By default dma_buf_export() sets the exporter name to be KBUILD_MODNAME. Unfortunately this may not be identical to the string used as the heap name (ie: "system" vs "system_heap").

This can cause some minor confusion with tooling, and there is the future potential where multiple heap types may be exported by the same module (but would all have the same name).

So to avoid all this, set the exporter exp_name to the heap name.

Cc Daniel Vetter <[email protected]>
Cc Sumit Semwal <[email protected]>
Cc Liam Mark <[email protected]>
Cc Chris Goldsworthy <[email protected]>
Cc Laura Abbott <[email protected]>
Cc Brian Starkey <[email protected]>
Cc Hridya Valsaraju <[email protected]>
Cc Suren Baghdasaryan <[email protected]>
Cc Sandeep Patil <[email protected]>
Cc Daniel Mentz <[email protected]>
Quoted 8 lines
Cc Ørjan Eide <[email protected]>
Cc Robin Murphy <[email protected]>
Cc Ezequiel Garcia <[email protected]>
Cc Simon Ser <[email protected]>
Cc James Jones <[email protected]>

Looks reasonable to me.

I guess the main worry is "does this mean heap names become uapi", in which case I'm maybe not so sure anymore how this will tie into the overall gpu memory accounting story.

Since for dma-buf heaps one name per buffer is perfectly fine, since dma-buf heaps aren't very dynamic. But on discrete gpu drivers buffers move, so baking in the assumption that "exporter name = resource usage for this buffer" is broken.

So I'm not sure we shouldn't instead name all the dma-buf heaps as "dma-buf heaps" to stop this :-)
-Daniel

Quoted 32 lines
---
 drivers/dma-buf/heaps/cma_heap.c    | 1 +
 drivers/dma-buf/heaps/system_heap.c | 1 +
 2 files changed, 2 insertions(+)
drivers/dma-buf/heaps/cma_heap.c +1 -0
index 364fc2f3e499..62465d61ccc7 100644
@@ -339,6 +339,7 @@ static int cma_heap_allocate(struct dma_heap *heap,
 	buffer->pagecount = pagecount;
 
 	/* create the dmabuf */
+	exp_info.exp_name = dma_heap_get_name(heap);
 	exp_info.ops = &cma_heap_buf_ops;
 	exp_info.size = buffer->len;
 	exp_info.flags = fd_flags;
drivers/dma-buf/heaps/system_heap.c +1 -0
index 17e0e9a68baf..2d4afc79c700 100644
@@ -388,6 +388,7 @@ static int system_heap_allocate(struct dma_heap *heap,
 	}
 
 	/* create the dmabuf */
+	exp_info.exp_name = dma_heap_get_name(heap);
 	exp_info.ops = &system_heap_buf_ops;
 	exp_info.size = buffer->len;
 	exp_info.flags = fd_flags;
Signature · 1 line
2.25.1
Signature · 7 lines
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
#3 lore raw

Re: [RFC][PATCH 2/2] dma-buf: heaps: Fix the name used when exporting dmabufs to be the actual heap name

Quoted 32 lines · Daniel Vetter
Quoted 20 lines · John Stultz

By default dma_buf_export() sets the exporter name to be KBUILD_MODNAME. Unfortunately this may not be identical to the string used as the heap name (ie: "system" vs "system_heap").

This can cause some minor confusion with tooling, and there is the future potential where multiple heap types may be exported by the same module (but would all have the same name).

So to avoid all this, set the exporter exp_name to the heap name.

Cc Daniel Vetter <[email protected]>
Cc Sumit Semwal <[email protected]>
Cc Liam Mark <[email protected]>
Cc Chris Goldsworthy <[email protected]>
Cc Laura Abbott <[email protected]>
Cc Brian Starkey <[email protected]>
Cc Hridya Valsaraju <[email protected]>
Cc Suren Baghdasaryan <[email protected]>
Cc Sandeep Patil <[email protected]>
Cc Daniel Mentz <[email protected]>
Quoted 8 lines
Cc Ørjan Eide <[email protected]>
Cc Robin Murphy <[email protected]>
Cc Ezequiel Garcia <[email protected]>
Cc Simon Ser <[email protected]>
Cc James Jones <[email protected]>

Looks reasonable to me.

Quoted 8 lines

I guess the main worry is "does this mean heap names become uapi", in which case I'm maybe not so sure anymore how this will tie into the overall gpu memory accounting story.

Since for dma-buf heaps one name per buffer is perfectly fine, since dma-buf heaps aren't very dynamic. But on discrete gpu drivers buffers move, so baking in the assumption that "exporter name = resource usage for this buffer" is broken.

I suspect I'm missing a subtlety in what you're describing. My sense of the exporter name doesn't account for a buffer's usage, it just describes what code allocated it and implicitly which dmabuf_ops handles it. Maybe could you give a more specific example of what you're hoping to avoid?

To me this patch is mostly just a consistency/least-surprise thing, so the heaps exporter name matches the string used for the heap's chardev device (the interface used to allocate it) in output like debugfs/dma_buf/bufinfo.

thanks
-john
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel

#4 lore raw

Re: [RFC][PATCH 2/2] dma-buf: heaps: Fix the name used when exporting dmabufs to be the actual heap name

Quoted 42 lines · John Stultz
Quoted 32 lines · Daniel Vetter
Quoted 20 lines · John Stultz

By default dma_buf_export() sets the exporter name to be KBUILD_MODNAME. Unfortunately this may not be identical to the string used as the heap name (ie: "system" vs "system_heap").

This can cause some minor confusion with tooling, and there is the future potential where multiple heap types may be exported by the same module (but would all have the same name).

So to avoid all this, set the exporter exp_name to the heap name.

Cc Daniel Vetter <[email protected]>
Cc Sumit Semwal <[email protected]>
Cc Liam Mark <[email protected]>
Cc Chris Goldsworthy <[email protected]>
Cc Laura Abbott <[email protected]>
Cc Brian Starkey <[email protected]>
Cc Hridya Valsaraju <[email protected]>
Cc Suren Baghdasaryan <[email protected]>
Cc Sandeep Patil <[email protected]>
Cc Daniel Mentz <[email protected]>
Quoted 8 lines
Cc Ørjan Eide <[email protected]>
Cc Robin Murphy <[email protected]>
Cc Ezequiel Garcia <[email protected]>
Cc Simon Ser <[email protected]>
Cc James Jones <[email protected]>

Looks reasonable to me.

Quoted 8 lines

I guess the main worry is "does this mean heap names become uapi", in which case I'm maybe not so sure anymore how this will tie into the overall gpu memory accounting story.

Since for dma-buf heaps one name per buffer is perfectly fine, since dma-buf heaps aren't very dynamic. But on discrete gpu drivers buffers move, so baking in the assumption that "exporter name = resource usage for this buffer" is broken.

Quoted 5 lines

I suspect I'm missing a subtlety in what you're describing. My sense of the exporter name doesn't account for a buffer's usage, it just describes what code allocated it and implicitly which dmabuf_ops handles it. Maybe could you give a more specific example of what you're hoping to avoid?

Just paranoia really - on the linux side where we allocate most buffers (even shared ones) with the driver, that allocator info isn't that meaningful, it really just tells you which code allocated/exported that dma-buf.

But on Android, where all shared buffers come from specific heaps, it is rather meaningful information. So I wondered whether e.g. the android dmabuf debug tool uses that to collect per-heap stats, but sounds like no right now. Plus with the chat we've had I think we have a long-term plan for how to expose that information properly.

Quoted 4 lines

To me this patch is mostly just a consistency/least-surprise thing, so the heaps exporter name matches the string used for the heap's chardev device (the interface used to allocate it) in output like debugfs/dma_buf/bufinfo.

Yeah for debug this makes sense. a-b: me if you want that somewhere on the patches.
-Daniel

Signature · 7 lines
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
maintainer
#5 lore raw

Re: [RFC][PATCH 2/2] dma-buf: heaps: Fix the name used when exporting dmabufs to be the actual heap name

Hi Daniel,

Quoted 61 lines · Daniel Vetter
Quoted 42 lines · John Stultz
Quoted 32 lines · Daniel Vetter
Quoted 20 lines · John Stultz

By default dma_buf_export() sets the exporter name to be KBUILD_MODNAME. Unfortunately this may not be identical to the string used as the heap name (ie: "system" vs "system_heap").

This can cause some minor confusion with tooling, and there is the future potential where multiple heap types may be exported by the same module (but would all have the same name).

So to avoid all this, set the exporter exp_name to the heap name.

Cc Daniel Vetter <[email protected]>
Cc Sumit Semwal <[email protected]>
Cc Liam Mark <[email protected]>
Cc Chris Goldsworthy <[email protected]>
Cc Laura Abbott <[email protected]>
Cc Brian Starkey <[email protected]>
Cc Hridya Valsaraju <[email protected]>
Cc Suren Baghdasaryan <[email protected]>
Cc Sandeep Patil <[email protected]>
Cc Daniel Mentz <[email protected]>
Quoted 8 lines
Cc Ørjan Eide <[email protected]>
Cc Robin Murphy <[email protected]>
Cc Ezequiel Garcia <[email protected]>
Cc Simon Ser <[email protected]>
Cc James Jones <[email protected]>

Looks reasonable to me.

Quoted 8 lines

I guess the main worry is "does this mean heap names become uapi", in which case I'm maybe not so sure anymore how this will tie into the overall gpu memory accounting story.

Since for dma-buf heaps one name per buffer is perfectly fine, since dma-buf heaps aren't very dynamic. But on discrete gpu drivers buffers move, so baking in the assumption that "exporter name = resource usage for this buffer" is broken.

Quoted 5 lines

I suspect I'm missing a subtlety in what you're describing. My sense of the exporter name doesn't account for a buffer's usage, it just describes what code allocated it and implicitly which dmabuf_ops handles it. Maybe could you give a more specific example of what you're hoping to avoid?

Just paranoia really - on the linux side where we allocate most buffers (even shared ones) with the driver, that allocator info isn't that meaningful, it really just tells you which code allocated/exported that dma-buf.

But on Android, where all shared buffers come from specific heaps, it is rather meaningful information. So I wondered whether e.g. the android dmabuf debug tool uses that to collect per-heap stats, but sounds like no right now. Plus with the chat we've had I think we have a long-term plan for how to expose that information properly.

Quoted 7 lines
Quoted 4 lines

To me this patch is mostly just a consistency/least-surprise thing, so the heaps exporter name matches the string used for the heap's chardev device (the interface used to allocate it) in output like debugfs/dma_buf/bufinfo.

Yeah for debug this makes sense. a-b: me if you want that somewhere on the patches.

Great that this got sorted; I'll apply both the patches of this series to drm-misc-next, with your a-b.

Quoted 1 line

-Daniel

Best
Sumit.

Quoted 4 lines

--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch

Signature · 9 lines
Thanks and regards,

Sumit Semwal
Linaro Consumer Group - Tech Lead
Linaro.org │ Open source software for ARM SoCs
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
#6 lore raw

Re: [RFC][PATCH 2/2] dma-buf: heaps: Fix the name used when exporting dmabufs to be the actual heap name

Quoted 70 lines · Sumit Semwal

Hi Daniel,

Quoted 66 lines · Daniel Vetter
Quoted 42 lines · John Stultz
Quoted 32 lines · Daniel Vetter
Quoted 20 lines · John Stultz

By default dma_buf_export() sets the exporter name to be KBUILD_MODNAME. Unfortunately this may not be identical to the string used as the heap name (ie: "system" vs "system_heap").

This can cause some minor confusion with tooling, and there is the future potential where multiple heap types may be exported by the same module (but would all have the same name).

So to avoid all this, set the exporter exp_name to the heap name.

Cc Daniel Vetter <[email protected]>
Cc Sumit Semwal <[email protected]>
Cc Liam Mark <[email protected]>
Cc Chris Goldsworthy <[email protected]>
Cc Laura Abbott <[email protected]>
Cc Brian Starkey <[email protected]>
Cc Hridya Valsaraju <[email protected]>
Cc Suren Baghdasaryan <[email protected]>
Cc Sandeep Patil <[email protected]>
Cc Daniel Mentz <[email protected]>
Quoted 8 lines
Cc Ørjan Eide <[email protected]>
Cc Robin Murphy <[email protected]>
Cc Ezequiel Garcia <[email protected]>
Cc Simon Ser <[email protected]>
Cc James Jones <[email protected]>

Looks reasonable to me.

Quoted 8 lines

I guess the main worry is "does this mean heap names become uapi", in which case I'm maybe not so sure anymore how this will tie into the overall gpu memory accounting story.

Since for dma-buf heaps one name per buffer is perfectly fine, since dma-buf heaps aren't very dynamic. But on discrete gpu drivers buffers move, so baking in the assumption that "exporter name = resource usage for this buffer" is broken.

Quoted 5 lines

I suspect I'm missing a subtlety in what you're describing. My sense of the exporter name doesn't account for a buffer's usage, it just describes what code allocated it and implicitly which dmabuf_ops handles it. Maybe could you give a more specific example of what you're hoping to avoid?

Just paranoia really - on the linux side where we allocate most buffers (even shared ones) with the driver, that allocator info isn't that meaningful, it really just tells you which code allocated/exported that dma-buf.

But on Android, where all shared buffers come from specific heaps, it is rather meaningful information. So I wondered whether e.g. the android dmabuf debug tool uses that to collect per-heap stats, but sounds like no right now. Plus with the chat we've had I think we have a long-term plan for how to expose that information properly.

Quoted 4 lines

To me this patch is mostly just a consistency/least-surprise thing, so the heaps exporter name matches the string used for the heap's chardev device (the interface used to allocate it) in output like debugfs/dma_buf/bufinfo.

Quoted 5 lines
Quoted 2 lines

Yeah for debug this makes sense. a-b: me if you want that somewhere on the patches.

Great that this got sorted; I'll apply both the patches of this series to drm-misc-next, with your a-b.

Before you do, let me spin a v2 as I got some minor tweaks needed (using const char*) to fix the kbuild bot errors.

thanks
-john
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel

#7 lore raw
In reply to John Stultz
[If your patch is applied to the wrong git tree, kindly drop us a note. And when submitting patch, we suggest to use '--base' as documented in https://git-scm.com/docs/git-format-patch]

Hi John,

[FYI, it's a private test report for your RFC patch.]
[auto build test ERROR on linux/master]
[also build test ERROR on tegra-drm/drm/tegra/for-next linus/master v5.11-rc6 next-20210125] [If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]

url:    https://github.com/0day-ci/linux/commits/John-Stultz/dma-buf-dma-heap-Provide-accessor-to-get-heap-name/20210206-134941
base:   https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git 2ab38c17aac10bf55ab3efde4c4db3893d8691d2
config: mips-randconfig-r035-20210205 (attached as .config)
compiler: clang version 12.0.0 (https://github.com/llvm/llvm-project c9439ca36342fb6013187d0a69aef92736951476)

reproduce (this is a W=1 build):
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross chmod +x ~/bin/make.cross
# install mips cross compiling tool for clang build
# apt-get install binutils-mips-linux-gnu
# https://github.com/0day-ci/linux/commit/a0d33f8ab61bbc0c4e8272707613d83ce8695a89
git remote add linux-review https://github.com/0day-ci/linux
git fetch --no-tags linux-review John-Stultz/dma-buf-dma-heap-Provide-accessor-to-get-heap-name/20210206-134941 git checkout a0d33f8ab61bbc0c4e8272707613d83ce8695a89
# save the attached .config to linux build tree
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=clang make.cross ARCH=mips

If you fix the issue, kindly add following tag as appropriate

All errors (new ones prefixed by >>):

>> drivers/dma-buf/dma-heap.c:203:9: error: returning 'const char *' from a function with result type 'char *' discards qualifiers [-Werror,-Wincompatible-pointer-types-discards-qualifiers]
           return heap->name;
                  ^~~~~~~~~~

1 error generated.

vim +203 drivers/dma-buf/dma-heap.c

192
193
194 /**
195 * dma_heap_get_name() - get heap name
196 * @heap: DMA-Heap to retrieve private data for
197 *
198 * Returns:
199 * The char* for the heap name.
200 */
201 char *dma_heap_get_name(struct dma_heap *heap)
202 {

 > 203		return heap->name;

204 }
205

---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all(a)lists.01.org

#8 lore raw
In reply to John Stultz
[If your patch is applied to the wrong git tree, kindly drop us a note. And when submitting patch, we suggest to use '--base' as documented in https://git-scm.com/docs/git-format-patch]

Hi John,

[FYI, it's a private test report for your RFC patch.]
[auto build test WARNING on linux/master]
[also build test WARNING on tegra-drm/drm/tegra/for-next linus/master v5.11-rc6 next-20210125] [If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]

url:    https://github.com/0day-ci/linux/commits/John-Stultz/dma-buf-dma-heap-Provide-accessor-to-get-heap-name/20210206-134941
base:   https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git 2ab38c17aac10bf55ab3efde4c4db3893d8691d2
config: i386-randconfig-s002-20210206 (attached as .config)
compiler: gcc-9 (Debian 9.3.0-15) 9.3.0
reproduce:
        # apt-get install sparse
        # sparse version: v0.6.3-215-g0fb77bb6-dirty
        # https://github.com/0day-ci/linux/commit/a0d33f8ab61bbc0c4e8272707613d83ce8695a89
        git remote add linux-review https://github.com/0day-ci/linux
        git fetch --no-tags linux-review John-Stultz/dma-buf-dma-heap-Provide-accessor-to-get-heap-name/20210206-134941
        git checkout a0d33f8ab61bbc0c4e8272707613d83ce8695a89
        # save the attached .config to linux build tree
        make W=1 C=1 CF='-fdiagnostic-prefix -D__CHECK_ENDIAN__' ARCH=i386 

If you fix the issue, kindly add following tag as appropriate

All warnings (new ones prefixed by >>):

drivers/dma-buf/dma-heap.c: In function 'dma_heap_get_name':

>> drivers/dma-buf/dma-heap.c:203:13: warning: return discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers]
     203 |  return heap->name;
         |         ~~~~^~~~~~

"sparse warnings: (new ones prefixed by >>)"

>> drivers/dma-buf/dma-heap.c:203:20: sparse: sparse: incorrect type in return expression (different modifiers) @@     expected char * @@     got char const *name @@

drivers/dma-buf/dma-heap.c:203:20: sparse: expected char *
drivers/dma-buf/dma-heap.c:203:20: sparse: got char const *name

vim +/const +203 drivers/dma-buf/dma-heap.c

192
193
194 /**
195 * dma_heap_get_name() - get heap name
196 * @heap: DMA-Heap to retrieve private data for
197 *
198 * Returns:
199 * The char* for the heap name.
200 */
201 char *dma_heap_get_name(struct dma_heap *heap)
202 {

 > 203		return heap->name;

204 }
205

---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all(a)lists.01.org