Carry forward IMA measurement log on kexec on ARM64
Subsystems (8)
v18 cover Carry forward IMA measurement log on kexec on ARM64
On kexec file load Integrity Measurement Architecture (IMA) subsystem may verify the IMA signature of the kernel and initramfs, and measure it. The command line parameters passed to the kernel in the kexec call may also be measured by IMA. A remote attestation service can verify a TPM quote based on the TPM event log, the IMA measurement list, and the TPM PCR data. This can be achieved only if the IMA measurement log is carried over from the current kernel to the next kernel across the kexec call.
powerpc already supports carrying forward the IMA measurement log on kexec. This patch set adds support for carrying forward the IMA measurement log on kexec on ARM64.
This patch set moves the platform independent code defined for powerpc such that it can be reused for other platforms as well. A chosen node "linux,ima-kexec-buffer" is added to the DTB for ARM64 to hold the address and the size of the memory reserved to carry the IMA measurement log.
This patch set has been tested for ARM64 platform using QEMU. I would like help from the community for testing this change on powerpc. Thanks.
This patch set is based on
commit f31e3386a4e9 ("ima: Free IMA measurement buffer after kexec syscall") in https://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity.git
"ima-kexec-fixes" branch.
Changelog:
v18
- Added a parameter to of_kexec_alloc_and_setup_fdt() for the caller to specify additional space needed for the FDT buffer
- Renamed arm64 and powerpc ELF buffer address field in "struct kimage_arch" to elf_load_addr to match x86_64 name.
- Removed of_ima_add_kexec_buffer() and instead directly set ima_buffer_addr and ima_buffer_size in ima_add_kexec_buffer()
- Moved FDT_EXTRA_SPACE definition from include/linux/of.h to drivers/of/kexec.c
v17
- Renamed of_kexec_setup_new_fdt() to of_kexec_alloc_and_setup_fdt(), and moved memory allocation for the new FDT to this function.
v16
- Defined functions to allocate and free buffer for FDT for powerpc
and arm64.
- Moved ima_buffer_addr and ima_buffer_size fields from "struct kimage_arch" in powerpc to "struct kimage"
v15
- Included Rob's patches in the patch set, and rebased the changes to "next-integrity" branch.
- Allocate memory for DTB, on arm64, using kmalloc() instead of vmalloc() to keep it consistent with powerpc implementation.
- Call of_kexec_setup_new_fdt() from setup_new_fdt_ppc64() and remove setup_new_fdt() in the same patch to keep it bisect safe.
v14
- Select CONFIG_HAVE_IMA_KEXEC for CONFIG_KEXEC_FILE, for powerpc and arm64, if CONFIG_IMA is enabled.
- Use IS_ENABLED() macro instead of "#ifdef" in remove_ima_buffer(), ima_get_kexec_buffer(), and ima_free_kexec_buffer().
- Call of_kexec_setup_new_fdt() from setup_new_fdt_ppc64() and remove setup_new_fdt() in "arch/powerpc/kexec/file_load.c".
v13
- Moved the arch independent functions to drivers/of/kexec.c and then refactored the code.
- Moved arch_ima_add_kexec_buffer() to security/integrity/ima/ima_kexec.c
v12
- Use fdt_appendprop_addrrange() in setup_ima_buffer() to setup the IMA measurement list property in the device tree.
- Moved architecture independent functions from "arch/powerpc/kexec/ima.c" to "drivers/of/kexec."
- Deleted "arch/powerpc/kexec/ima.c" and "arch/powerpc/include/asm/ima.h".
v11
- Rebased the changes on the kexec code refactoring done by Rob Herring in his "dt/kexec" branch
- Removed "extern" keyword in function declarations
- Removed unnecessary header files included in C files
- Updated patch descriptions per Thiago's comments
v10
- Moved delete_fdt_mem_rsv(), remove_ima_buffer(), get_ima_kexec_buffer, and get_root_addr_size_cells() to drivers/of/kexec.c
- Moved arch_ima_add_kexec_buffer() to security/integrity/ima/ima_kexec.c
- Conditionally define IMA buffer fields in struct kimage_arch
v9
- Moved delete_fdt_mem_rsv() to drivers/of/kexec_fdt.c
- Defined a new function get_ima_kexec_buffer() in drivers/of/ima_kexec.c to replace do_get_kexec_buffer()
- Changed remove_ima_kexec_buffer() to the original function name remove_ima_buffer()
- Moved remove_ima_buffer() to drivers/of/ima_kexec.c
- Moved ima_get_kexec_buffer() and ima_free_kexec_buffer() to security/integrity/ima/ima_kexec.c
v8:
- Moved remove_ima_kexec_buffer(), do_get_kexec_buffer(), and delete_fdt_mem_rsv() to drivers/of/fdt.c
- Moved ima_dump_measurement_list() and ima_add_kexec_buffer() back to security/integrity/ima/ima_kexec.c
v7:
- Renamed remove_ima_buffer() to remove_ima_kexec_buffer() and moved this function definition to kernel.
- Moved delete_fdt_mem_rsv() definition to kernel
- Moved ima_dump_measurement_list() and ima_add_kexec_buffer() to a new file namely ima_kexec_fdt.c in IMA
v6:
- Remove any existing FDT_PROP_IMA_KEXEC_BUFFER property in the device tree and also its corresponding memory reservation in the currently running kernel.
- Moved the function remove_ima_buffer() defined for powerpc to IMA and renamed the function to ima_remove_kexec_buffer(). Also, moved delete_fdt_mem_rsv() from powerpc to IMA.
v5:
- Merged get_addr_size_cells() and do_get_kexec_buffer() into a single function when moving the arch independent code from powerpc to IMA
- Reverted the change to use FDT functions in powerpc code and added back the original code in get_addr_size_cells() and do_get_kexec_buffer() for powerpc.
- Added fdt_add_mem_rsv() for ARM64 to reserve the memory for the IMA log buffer during kexec.
- Fixed the warning reported by kernel test bot for ARM64 arch_ima_add_kexec_buffer() - moved this function to a new file namely arch/arm64/kernel/ima_kexec.c
v4:
- Submitting the patch series on behalf of the original author Prakhar Srivastava <[email protected]>
- Moved FDT_PROP_IMA_KEXEC_BUFFER ("linux,ima-kexec-buffer") to libfdt.h so that it can be shared by multiple platforms.
v3:
Breakup patches further into separate patches.
- Refactoring non architecture specific code out of powerpc
- Update powerpc related code to use fdt functions
- Update IMA buffer read related code to use of functions
- Add support to store the memory information of the IMA measurement logs to be carried forward.
- Update the property strings to align with documented nodes
https://github.com/devicetree-org/dt-schema/pull/46
v2:
Break patches into separate patches.
- Powerpc related Refactoring
- Updating the docuemntation for chosen node
- Updating arm64 to support IMA buffer pass
v1:
Refactoring carrying over IMA measuremnet logs over Kexec. This patch
moves the non-architecture specific code out of powerpc and adds to security/ima.(Suggested by Thiago)
Add Documentation regarding the ima-kexec-buffer node in the chosen
node documentation
v0:
Add a layer of abstraction to use the memory reserved by device tree
for ima buffer pass.
Add support for ima buffer pass using reserved memory for arm64 kexec.
Update the arch sepcific code path in kexec file load to store the ima buffer in the reserved memory. The same reserved memory is read on kexec or cold boot.
Lakshmi Ramasubramanian (7):
arm64: Rename kexec elf_headers_mem to elf_load_addr
powerpc: Move ima buffer fields to struct kimage
powerpc: Enable passing IMA log to next kernel on kexec
powerpc: Move arch independent ima kexec functions to
drivers/of/kexec.c
kexec: Use fdt_appendprop_addrrange() to add ima buffer to FDT
powerpc: Delete unused function delete_fdt_mem_rsv()
arm64: Enable passing IMA log to next kernel on kexec
Rob Herring (4):
powerpc: Rename kexec elfcorehdr_addr to elf_load_addr
of: Add a common kexec FDT setup function
arm64: Use common of_kexec_alloc_and_setup_fdt()
powerpc: Use common of_kexec_alloc_and_setup_fdt()
arch/arm64/Kconfig | 1 + arch/arm64/include/asm/kexec.h | 2 +- arch/arm64/kernel/machine_kexec_file.c | 184 +--------- arch/powerpc/Kconfig | 2 +- arch/powerpc/include/asm/ima.h | 30 -- arch/powerpc/include/asm/kexec.h | 12 +- arch/powerpc/kexec/Makefile | 7 - arch/powerpc/kexec/elf_64.c | 30 +- arch/powerpc/kexec/file_load.c | 183 +--------- arch/powerpc/kexec/file_load_64.c | 11 +- arch/powerpc/kexec/ima.c | 219 ------------ drivers/of/Makefile | 6 + drivers/of/kexec.c | 458 +++++++++++++++++++++++++ include/linux/kexec.h | 3 + include/linux/of.h | 7 + security/integrity/ima/ima.h | 4 - security/integrity/ima/ima_kexec.c | 9 +- 17 files changed, 516 insertions(+), 652 deletions(-) delete mode 100644 arch/powerpc/include/asm/ima.h delete mode 100644 arch/powerpc/kexec/ima.c create mode 100644 drivers/of/kexec.c
Signature · 1 line
2.30.0
PATCH v18 1/11 powerpc: Rename kexec elfcorehdr_addr to elf_load_addr
From: Rob Herring <[email protected]>
The architecture specific field, elfcorehdr_addr in struct kimage_arch, that holds the address of the buffer in memory for ELF core header for powerpc has a different name than the one used for x86_64. This makes it hard to have a common code for setting up the device tree for kexec system call.
Rename elfcorehdr_addr to elf_load_addr to align with x86_64 name so common code can use it.
--- arch/powerpc/include/asm/kexec.h | 2 +- arch/powerpc/kexec/file_load.c | 4 ++-- arch/powerpc/kexec/file_load_64.c | 4 ++-- 3 files changed, 5 insertions(+), 5 deletions(-)
arch/powerpc/include/asm/kexec.h +1 -1
@@ -108,7 +108,7 @@ struct kimage_arch {unsigned long backup_start;void *backup_buf; -unsigned long elfcorehdr_addr; +unsigned long elf_load_addr;unsigned long elf_headers_sz;void *elf_headers;
arch/powerpc/kexec/file_load.c +2 -2
@@ -45,7 +45,7 @@ char *setup_kdump_cmdline(struct kimage *image, char *cmdline,return NULL ; elfcorehdr_strlen =sprintf (cmdline_ptr,"elfcorehdr=0x%lx " , - image->arch.elfcorehdr_addr); + image->arch.elf_load_addr);if (elfcorehdr_strlen + cmdline_len >COMMAND_LINE_SIZE ) {pr_err ("Appending elfcorehdr=<addr> exceeds cmdline size\n" );
@@ -263,7 +263,7 @@ int setup_new_fdt(const struct kimage *image, void *fdt,* Avoid elfcorehdr from being stomped on in kdump kernel by * setting up memory reserve map. */ - ret =fdt_add_mem_rsv (fdt, image->arch.elfcorehdr_addr, + ret =fdt_add_mem_rsv (fdt, image->arch.elf_load_addr, image->arch.elf_headers_sz);if (ret) { pr_err("Error reserving elfcorehdr memory: %s\n",
arch/powerpc/kexec/file_load_64.c +2 -2
@@ -815,7 +815,7 @@ static int load_elfcorehdr_segment(struct kimage *image, struct kexec_buf *kbuf) goto out; } - image->arch.elfcorehdr_addr = kbuf->mem; + image->arch.elf_load_addr = kbuf->mem; image->arch.elf_headers_sz = headers_sz; image->arch.elf_headers = headers; out:
@@ -851,7 +851,7 @@ int load_crashdump_segments_ppc64(struct kimage *image,return ret; }pr_debug ("Loaded elf core header at 0x%lx, bufsz=0x%lx memsz=0x%lx\n" , - image->arch.elfcorehdr_addr, kbuf->bufsz, kbuf->memsz); + image->arch.elf_load_addr, kbuf->bufsz, kbuf->memsz);return 0 ; }
Signature · 1 line
2.30.0
Re: [PATCH v18 01/11] powerpc: Rename kexec elfcorehdr_addr to elf_load_addr
Quoted 11 lines · Lakshmi Ramasubramanian
From: Rob Herring <[email protected]>
The architecture specific field,
elfcorehdr_addrin structkimage_arch, that holds the address of the buffer in memory for ELF core header for powerpc has a different name than the one used forx86_64. This makes it hard to have a common code for setting up the device tree for kexec system call.Rename
elfcorehdr_addrtoelf_load_addrto align withx86_64name so common code can use it.
Quoted 7 lines
Signed-off-by Rob Herring <[email protected]>Reviewed-by Lakshmi Ramasubramanian <[email protected]>--- arch/powerpc/include/asm/kexec.h | 2 +- arch/powerpc/kexec/file_load.c | 4 ++-- arch/powerpc/kexec/file_load_64.c | 4 ++-- 3 files changed, 5 insertions(+), 5 deletions(-)
Signature · 7 lines
Thiago Jung Bauermann IBM Linux Technology Center _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
PATCH v18 2/11 arm64: Rename kexec elf_headers_mem to elf_load_addr
In reply to Lakshmi RamasubramanianThe architecture specific field, elf_headers_mem in struct kimage_arch, that holds the address of the buffer in memory for ELF core header for arm64 has a different name than the one used for powerpc. This makes it hard to have a common code for setting up the device tree for kexec system call.
Rename elf_headers_mem to elf_load_addr to align with powerpc name so common code can use it.
--- arch/arm64/include/asm/kexec.h | 2 +- arch/arm64/kernel/machine_kexec_file.c | 6 +++--- 2 files changed, 4 insertions(+), 4 deletions(-)
arch/arm64/include/asm/kexec.h +1 -1
@@ -98,7 +98,7 @@ struct kimage_arch {unsigned long dtb_mem;/* Core ELF header buffer */ void *elf_headers; -unsigned long elf_headers_mem; +unsigned long elf_load_addr;unsigned long elf_headers_sz; };
arch/arm64/kernel/machine_kexec_file.c +3 -3
@@ -73,7 +73,7 @@ static int setup_dtb(struct kimage *image,/* add linux,elfcorehdr */ ret =fdt_appendprop_addrrange (dtb,0 , off,FDT_PROP_KEXEC_ELFHDR , - image->arch.elf_headers_mem, + image->arch.elf_load_addr, image->arch.elf_headers_sz);if (ret)return (ret == -FDT_ERR_NOSPACE ? -ENOMEM : -EINVAL );
@@ -283,11 +283,11 @@ int load_other_segments(struct kimage *image, goto out_err; } image->arch.elf_headers = headers; - image->arch.elf_headers_mem = kbuf.mem; + image->arch.elf_load_addr = kbuf.mem; image->arch.elf_headers_sz = headers_sz;pr_debug ("Loaded elf core header at 0x%lx bufsz=0x%lx memsz=0x%lx\n" , - image->arch.elf_headers_mem, kbuf.bufsz, kbuf.memsz); + image->arch.elf_load_addr, kbuf.bufsz, kbuf.memsz); }/* load initrd */
Signature · 1 line
2.30.0
Re: [PATCH v18 02/11] arm64: Rename kexec elf_headers_mem to elf_load_addr
Quoted 9 lines · Lakshmi Ramasubramanian
The architecture specific field,
elf_headers_memin structkimage_arch, that holds the address of the buffer in memory for ELF core header for arm64 has a different name than the one used for powerpc. This makes it hard to have a common code for setting up the device tree for kexec system call.Rename
elf_headers_memtoelf_load_addrto align with powerpc name so common code can use it.
Quoted 6 lines
Signed-off-by Lakshmi Ramasubramanian <[email protected]>Suggested-by Thiago Jung Bauermann <[email protected]>--- arch/arm64/include/asm/kexec.h | 2 +- arch/arm64/kernel/machine_kexec_file.c | 6 +++--- 2 files changed, 4 insertions(+), 4 deletions(-)
Signature · 2 lines
Thiago Jung Bauermann IBM Linux Technology Center
PATCH v18 3/11 of: Add a common kexec FDT setup function
In reply to Lakshmi RamasubramanianFrom: Rob Herring <[email protected]>
Both arm64 and powerpc do essentially the same FDT /chosen setup for kexec. The differences are either omissions that arm64 should have or additional properties that will be ignored. The setup code can be combined and shared by both powerpc and arm64.
The differences relative to the arm64 version:
- If /chosen doesn't exist, it will be created (should never happen).
- Any old dtb and initrd reserved memory will be released.
- The new initrd and elfcorehdr are marked reserved.
- "linux,booted-from-kexec" is set.
The differences relative to the powerpc version:
- "kaslr-seed" and "rng-seed" may be set.
- "linux,elfcorehdr" is set.
- Any existing "linux,usable-memory-range" is removed.
Combine the code for setting up the /chosen node in the FDT and updating the memory reservation for kexec, for powerpc and arm64, in of_kexec_alloc_and_setup_fdt() and move it to "drivers/of/kexec.c".
--- drivers/of/Makefile | 6 + drivers/of/kexec.c | 265 ++++++++++++++++++++++++++++++++++++++++++++ include/linux/of.h | 5 + 3 files changed, 276 insertions(+) create mode 100644 drivers/of/kexec.c
drivers/of/Makefile +6 -0
@@ -14,4 +14,10 @@ obj-$(CONFIG_OF_RESOLVE) += resolver.o obj-$(CONFIG_OF_OVERLAY) += overlay.o obj-$(CONFIG_OF_NUMA) += of_numa.o +ifdef CONFIG_KEXEC_FILE +ifdef CONFIG_OF_FLATTREE +obj-y += kexec.o +endif +endif + obj-$(CONFIG_OF_UNITTEST) += unittest-data/
drivers/of/kexec.c new file +265 -0
265 lines not on this page · raw message
include/linux/of.h +5 -0
@@ -560,6 +560,11 @@ int of_map_id(struct device_node *np, u32 id,phys_addr_t of_dma_get_max_cpu_address (struct device_node *np); +struct kimage ; +void *of_kexec_alloc_and_setup_fdt (const struct kimage *image, +unsigned long initrd_load_addr, +unsigned long initrd_len, +const char *cmdline,size_t extra_fdt_size);#else /* CONFIG_OF */ static inline void of_core_init (void )
Signature · 1 line
2.30.0
Re: [PATCH v18 03/11] of: Add a common kexec FDT setup function
Quoted 22 lines · Lakshmi Ramasubramanian
From: Rob Herring <[email protected]>
Both arm64 and powerpc do essentially the same FDT /chosen setup for kexec. The differences are either omissions that arm64 should have or additional properties that will be ignored. The setup code can be combined and shared by both powerpc and arm64.
The differences relative to the arm64 version:
- If /chosen doesn't exist, it will be created (should never happen).
- Any old dtb and initrd reserved memory will be released.
- The new initrd and elfcorehdr are marked reserved.
- "linux,booted-from-kexec" is set.The differences relative to the powerpc version:
- "kaslr-seed" and "rng-seed" may be set.
- "linux,elfcorehdr" is set.
- Any existing "linux,usable-memory-range" is removed.Combine the code for setting up the /chosen node in the FDT and updating the memory reservation for kexec, for powerpc and arm64, in
of_kexec_alloc_and_setup_fdt()and move it to "drivers/of/kexec.c".
Quoted 8 lines
Signed-off-by Rob Herring <[email protected]>Signed-off-by Lakshmi Ramasubramanian <[email protected]>--- drivers/of/Makefile | 6 + drivers/of/kexec.c | 265 ++++++++++++++++++++++++++++++++++++++++++++ include/linux/of.h | 5 + 3 files changed, 276 insertions(+) create mode 100644 drivers/of/kexec.c
Signature · 7 lines
Thiago Jung Bauermann IBM Linux Technology Center _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Re: [PATCH v18 03/11] of: Add a common kexec FDT setup function
In reply to Lakshmi RamasubramanianQuoted 18 lines · Lakshmi Ramasubramanian
From: Rob Herring <[email protected]>
Both arm64 and powerpc do essentially the same FDT /chosen setup for kexec. The differences are either omissions that arm64 should have or additional properties that will be ignored. The setup code can be combined and shared by both powerpc and arm64.
The differences relative to the arm64 version:
- If /chosen doesn't exist, it will be created (should never happen).
- Any old dtb and initrd reserved memory will be released.
- The new initrd and elfcorehdr are marked reserved.
- "linux,booted-from-kexec" is set.The differences relative to the powerpc version:
- "kaslr-seed" and "rng-seed" may be set.
- "linux,elfcorehdr" is set.
- Any existing "linux,usable-memory-range" is removed.
Quoted 6 lines
Combine the code for setting up the /chosen node in the FDT and updating the memory reservation for kexec, for powerpc and arm64, in
of_kexec_alloc_and_setup_fdt()and move it to "drivers/of/kexec.c".Signed-off-by Rob Herring <[email protected]>Signed-off-by Lakshmi Ramasubramanian <[email protected]>
s390:allmodconfig:
drivers/of/kexec.c: In function 'of_kexec_alloc_and_setup_fdt':drivers/of/kexec.c:378:10: error: 'const struct kimage' has no member named 'arch'
378 | image->arch.elf_load_addr,
| ^~drivers/of/kexec.c:379:10: error: 'const struct kimage' has no member named 'arch'
379 | image->arch.elf_headers_sz);
| ^~drivers/of/kexec.c:387:35: error: 'const struct kimage' has no member named 'arch'
387 | ret = fdt_add_mem_rsv(fdt, image->arch.elf_load_addr,
| ^~drivers/of/kexec.c:388:16: error: 'const struct kimage' has no member named 'arch'
388 | image->arch.elf_headers_sz);
| ^~
Guenter
Re: [PATCH v18 03/11] of: Add a common kexec FDT setup function
On 2/21/21 5:32 PM, Guenter Roeck wrote:
Hi Guenter,
Quoted 28 lines · Lakshmi Ramasubramanian
Quoted 18 lines
From: Rob Herring <[email protected]>
Both arm64 and powerpc do essentially the same FDT /chosen setup for kexec. The differences are either omissions that arm64 should have or additional properties that will be ignored. The setup code can be combined and shared by both powerpc and arm64.
The differences relative to the arm64 version:
- If /chosen doesn't exist, it will be created (should never happen).
- Any old dtb and initrd reserved memory will be released.
- The new initrd and elfcorehdr are marked reserved.
- "linux,booted-from-kexec" is set.The differences relative to the powerpc version:
- "kaslr-seed" and "rng-seed" may be set.
- "linux,elfcorehdr" is set.
- Any existing "linux,usable-memory-range" is removed.Quoted 6 lines
Combine the code for setting up the /chosen node in the FDT and updating the memory reservation for kexec, for powerpc and arm64, in
of_kexec_alloc_and_setup_fdt()and move it to "drivers/of/kexec.c".Signed-off-by Rob Herring <[email protected]>Signed-off-by Lakshmi Ramasubramanian <[email protected]>s390:allmodconfig:
Quoted 14 lines
drivers/of/kexec.c: In function 'of_kexec_alloc_and_setup_fdt':drivers/of/kexec.c:378:10: error: 'const struct kimage' has no member named 'arch'
378 |image->arch.elf_load_addr,
| ^~drivers/of/kexec.c:379:10: error: 'const struct kimage' has no member named 'arch'
379 |image->arch.elf_headers_sz);
| ^~drivers/of/kexec.c:387:35: error: 'const struct kimage' has no member named 'arch'
387 | ret = fdt_add_mem_rsv(fdt,image->arch.elf_load_addr,
| ^~drivers/of/kexec.c:388:16: error: 'const struct kimage' has no member named 'arch'
388 |image->arch.elf_headers_sz);
| ^~
I have posted a new patch set (link given below) that fixes the above build break. Could you please try that?
https://patchwork.kernel.org/project/linux-integrity/patch/[email protected]/
thanks,
-lakshmi
PATCH v18 4/11 arm64: Use common of_kexec_alloc_and_setup_fdt()
In reply to Lakshmi RamasubramanianFrom: Rob Herring <[email protected]>
The code for setting up the /chosen node in the device tree and updating the memory reservation for the next kernel has been moved to of_kexec_alloc_and_setup_fdt() defined in "drivers/of/kexec.c".
Use the common of_kexec_alloc_and_setup_fdt() to setup the device tree and update the memory reservation for kexec for arm64.
--- arch/arm64/kernel/machine_kexec_file.c | 180 ++----------------------- 1 file changed, 8 insertions(+), 172 deletions(-)
arch/arm64/kernel/machine_kexec_file.c +8 -172
@@ -15,23 +15,12 @@#include <linux/kexec.h> #include <linux/libfdt.h> #include <linux/memblock.h> +#include <linux/of.h> #include <linux/of_fdt.h> -#include <linux/random.h> #include <linux/slab.h> #include <linux/string.h> #include <linux/types.h> #include <linux/vmalloc.h> -#include <asm/byteorder.h> - -/* relevant device tree properties */ -#define FDT_PROP_KEXEC_ELFHDR "linux,elfcorehdr" -#define FDT_PROP_MEM_RANGE "linux,usable-memory-range" -#define FDT_PROP_INITRD_START "linux,initrd-start" -#define FDT_PROP_INITRD_END "linux,initrd-end" -#define FDT_PROP_BOOTARGS "bootargs" -#define FDT_PROP_KASLR_SEED "kaslr-seed" -#define FDT_PROP_RNG_SEED "rng-seed" -#define RNG_SEED_SIZE 128const struct kexec_file_ops *const kexec_file_loaders[] = { &kexec_image_ops,
@@ -40,7 +29,7 @@ const struct kexec_file_ops * const kexec_file_loaders[] = {int arch_kimage_file_post_load_cleanup (struct kimage *image) { -vfree (image->arch.dtb); +kvfree (image->arch.dtb); image->arch.dtb =NULL ;vfree (image->arch.elf_headers);
@@ -50,162 +39,6 @@ int arch_kimage_file_post_load_cleanup(struct kimage *image)return kexec_image_post_load_cleanup_default (image); } -static int setup_dtb (struct kimage *image, -unsigned long initrd_load_addr,unsigned long initrd_len, -char *cmdline,void *dtb) -{ -int off, ret; - - ret =fdt_path_offset (dtb,"/chosen" ); -if (ret <0 ) - goto out; - - off = ret; - - ret =fdt_delprop (dtb, off,FDT_PROP_KEXEC_ELFHDR ); -if (ret && ret != -FDT_ERR_NOTFOUND ) - goto out; - ret =fdt_delprop (dtb, off,FDT_PROP_MEM_RANGE ); -if (ret && ret != -FDT_ERR_NOTFOUND ) - goto out; - -if (image->type ==KEXEC_TYPE_CRASH ) { -/* add linux,elfcorehdr */ - ret =fdt_appendprop_addrrange (dtb,0 , off, -FDT_PROP_KEXEC_ELFHDR , - image->arch.elf_load_addr, - image->arch.elf_headers_sz); -if (ret) -return (ret == -FDT_ERR_NOSPACE ? -ENOMEM : -EINVAL ); - -/* add linux,usable-memory-range */ - ret =fdt_appendprop_addrrange (dtb,0 , off, -FDT_PROP_MEM_RANGE , - crashk_res.start, - crashk_res.end - crashk_res.start +1 ); -if (ret) -return (ret == -FDT_ERR_NOSPACE ? -ENOMEM : -EINVAL ); - } - -/* add bootargs */ -if (cmdline) { - ret =fdt_setprop_string (dtb, off,FDT_PROP_BOOTARGS , cmdline); -if (ret) - goto out; - }else { - ret =fdt_delprop (dtb, off,FDT_PROP_BOOTARGS ); -if (ret && (ret != -FDT_ERR_NOTFOUND )) - goto out; - } - -/* add initrd-* */ -if (initrd_load_addr) { - ret =fdt_setprop_u64 (dtb, off,FDT_PROP_INITRD_START , - initrd_load_addr); -if (ret) - goto out; - - ret =fdt_setprop_u64 (dtb, off,FDT_PROP_INITRD_END , - initrd_load_addr + initrd_len); -if (ret) - goto out; - }else { - ret =fdt_delprop (dtb, off,FDT_PROP_INITRD_START ); -if (ret && (ret != -FDT_ERR_NOTFOUND )) - goto out; - - ret =fdt_delprop (dtb, off,FDT_PROP_INITRD_END ); -if (ret && (ret != -FDT_ERR_NOTFOUND )) - goto out; - } - -/* add kaslr-seed */ - ret =fdt_delprop (dtb, off,FDT_PROP_KASLR_SEED ); -if (ret == -FDT_ERR_NOTFOUND ) - ret =0 ; -else if (ret) - goto out; - -if (rng_is_initialized ()) { -u64 seed =get_random_u64 (); - ret =fdt_setprop_u64 (dtb, off,FDT_PROP_KASLR_SEED , seed); -if (ret) - goto out; - }else { -pr_notice ("RNG is not initialised: omitting \"%s\" property\n" , -FDT_PROP_KASLR_SEED ); - } - -/* add rng-seed */ -if (rng_is_initialized ()) { -void *rng_seed; - ret =fdt_setprop_placeholder (dtb, off,FDT_PROP_RNG_SEED , -RNG_SEED_SIZE , &rng_seed); -if (ret) - goto out; -get_random_bytes (rng_seed,RNG_SEED_SIZE ); - }else { -pr_notice ("RNG is not initialised: omitting \"%s\" property\n" , -FDT_PROP_RNG_SEED ); - } - -out: -if (ret) -return (ret == -FDT_ERR_NOSPACE ) ? -ENOMEM : -EINVAL ; - -return 0 ; -} - -/* -* More space needed so that we can add initrd, bootargs, kaslr-seed, -* rng-seed, userable-memory-range and elfcorehdr. -*/ -#define DTB_EXTRA_SPACE 0x1000 - -static int create_dtb (struct kimage *image, -unsigned long initrd_load_addr,unsigned long initrd_len, -char *cmdline,void **dtb) -{ -void *buf; -size_t buf_size; -size_t cmdline_len; -int ret; - - cmdline_len = cmdline ?strlen (cmdline) :0 ; - buf_size =fdt_totalsize (initial_boot_params) - + cmdline_len +DTB_EXTRA_SPACE ; - -for (;;) { - buf =vmalloc (buf_size); -if (!buf) -return -ENOMEM ; - -/* duplicate a device tree blob */ - ret =fdt_open_into (initial_boot_params, buf, buf_size); -if (ret) -return -EINVAL ; - - ret =setup_dtb (image, initrd_load_addr, initrd_len, - cmdline, buf); -if (ret) { -vfree (buf); -if (ret == -ENOMEM ) { -/* unlikely, but just in case */ - buf_size +=DTB_EXTRA_SPACE ; -continue ; - }else { -return ret; - } - } - -/* trim it */ -fdt_pack (buf); - *dtb = buf; - -return 0 ; - } -} -static int prepare_elf_headers (void **addr,unsigned long *sz) {struct crash_mem *cmem;
@@ -312,12 +145,15 @@ int load_other_segments(struct kimage *image, }/* load dtb */ - ret =create_dtb (image, initrd_load_addr, initrd_len, cmdline, &dtb); -if (ret) { + dtb =of_kexec_alloc_and_setup_fdt (image, initrd_load_addr, + initrd_len, cmdline,0 ); +if (!dtb) {pr_err ("Preparing for new dtb failed\n" ); goto out_err; } +/* trim it */ +fdt_pack (dtb); dtb_len =fdt_totalsize (dtb); kbuf.buffer = dtb; kbuf.bufsz = dtb_len;
@@ -341,6 +177,6 @@ int load_other_segments(struct kimage *image, out_err: image->nr_segments = orig_segments; -vfree (dtb); +kvfree (dtb);return ret; }
Signature · 1 line
2.30.0
Re: [PATCH v18 04/11] arm64: Use common of_kexec_alloc_and_setup_fdt()
Quoted 6 lines · Lakshmi Ramasubramanian
From: Rob Herring <[email protected]>
The code for setting up the /chosen node in the device tree and updating the memory reservation for the next kernel has been moved to
of_kexec_alloc_and_setup_fdt()defined in "drivers/of/kexec.c".
Quoted 8 lines
Use the common
of_kexec_alloc_and_setup_fdt()to setup the device tree and update the memory reservation for kexec for arm64.Signed-off-by Rob Herring <[email protected]>Signed-off-by Lakshmi Ramasubramanian <[email protected]>--- arch/arm64/kernel/machine_kexec_file.c | 180 ++----------------------- 1 file changed, 8 insertions(+), 172 deletions(-)
Signature · 2 lines
Thiago Jung Bauermann IBM Linux Technology Center
PATCH v18 5/11 powerpc: Use common of_kexec_alloc_and_setup_fdt()
In reply to Lakshmi RamasubramanianFrom: Rob Herring <[email protected]>
The code for setting up the /chosen node in the device tree and updating the memory reservation for the next kernel has been moved to of_kexec_alloc_and_setup_fdt() defined in "drivers/of/kexec.c".
Use the common of_kexec_alloc_and_setup_fdt() to setup the device tree and update the memory reservation for kexec for powerpc.
--- arch/powerpc/include/asm/kexec.h | 1 + arch/powerpc/kexec/elf_64.c | 30 ++++--- arch/powerpc/kexec/file_load.c | 132 +----------------------------- arch/powerpc/kexec/file_load_64.c | 3 + 4 files changed, 26 insertions(+), 140 deletions(-)
arch/powerpc/include/asm/kexec.h +1 -0
@@ -111,6 +111,7 @@ struct kimage_arch {unsigned long elf_load_addr;unsigned long elf_headers_sz;void *elf_headers; +void *fdt;#ifdef CONFIG_IMA_KEXEC phys_addr_t ima_buffer_addr;
arch/powerpc/kexec/elf_64.c +18 -12
@@ -19,6 +19,7 @@#include <linux/kexec.h> #include <linux/libfdt.h> #include <linux/module.h> +#include <linux/of.h> #include <linux/of_fdt.h> #include <linux/slab.h> #include <linux/types.h>
@@ -29,7 +30,6 @@ static void *elf64_load(struct kimage *image, char *kernel_buf, unsigned long cmdline_len) {int ret; -unsigned int fdt_size;unsigned long kernel_load_addr;unsigned long initrd_load_addr =0 , fdt_load_addr;void *fdt;
@@ -102,15 +102,10 @@ static void *elf64_load(struct kimage *image, char *kernel_buf,pr_debug ("Loaded initrd at 0x%lx\n" , initrd_load_addr); } - fdt_size =fdt_totalsize (initial_boot_params) *2 ; - fdt =kmalloc (fdt_size,GFP_KERNEL ); + fdt =of_kexec_alloc_and_setup_fdt (image, initrd_load_addr, + initrd_len, cmdline, +fdt_totalsize (initial_boot_params));if (!fdt) { -pr_err ("Not enough memory for the device tree.\n" ); - ret = -ENOMEM ; - goto out; - } - ret =fdt_open_into (initial_boot_params, fdt, fdt_size); -if (ret <0 ) {pr_err ("Error setting up the new device tree.\n" ); ret = -EINVAL ; goto out;
@@ -124,13 +119,17 @@ static void *elf64_load(struct kimage *image, char *kernel_buf,fdt_pack (fdt); kbuf.buffer = fdt; - kbuf.bufsz = kbuf.memsz = fdt_size; + kbuf.bufsz = kbuf.memsz =fdt_totalsize (fdt); kbuf.buf_align =PAGE_SIZE ; kbuf.top_down = true; kbuf.mem =KEXEC_BUF_MEM_UNKNOWN ; ret =kexec_add_buffer (&kbuf);if (ret) goto out; + +/* FDT will be freed in arch_kimage_file_post_load_cleanup */ + image->arch.fdt = fdt; + fdt_load_addr = kbuf.mem;pr_debug ("Loaded device tree at 0x%lx\n" , fdt_load_addr);
@@ -145,8 +144,15 @@ static void *elf64_load(struct kimage *image, char *kernel_buf,kfree (modified_cmdline);kexec_free_elf_info (&elf_info); -/* Make kimage_file_post_load_cleanup free the fdt buffer for us. */ -return ret ?ERR_PTR (ret) : fdt; +/* +* Once FDT buffer has been successfully passed to kexec_add_buffer(), +* the FDT buffer address is saved in image->arch.fdt. In that case, +* the memory cannot be freed here in case of any other error. +*/ +if (ret && !image->arch.fdt) +kvfree (fdt); + +return ret ?ERR_PTR (ret) :NULL ; }const struct kexec_file_ops kexec_elf64_ops = {
arch/powerpc/kexec/file_load.c +4 -128
139 lines not on this page · raw message
arch/powerpc/kexec/file_load_64.c +3 -0
@@ -1111,5 +1111,8 @@ int arch_kimage_file_post_load_cleanup(struct kimage *image) image->arch.elf_headers =NULL ; image->arch.elf_headers_sz =0 ; +kvfree (image->arch.fdt); + image->arch.fdt =NULL ; +return kexec_image_post_load_cleanup_default (image); }
Signature · 7 lines
2.30.0 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Re: [PATCH v18 05/11] powerpc: Use common of_kexec_alloc_and_setup_fdt()
Quoted 9 lines · Lakshmi Ramasubramanian
From: Rob Herring <[email protected]>
The code for setting up the /chosen node in the device tree and updating the memory reservation for the next kernel has been moved to
of_kexec_alloc_and_setup_fdt()defined in "drivers/of/kexec.c".Use the common
of_kexec_alloc_and_setup_fdt()to setup the device tree and update the memory reservation for kexec for powerpc.
Quoted 8 lines
Signed-off-by Rob Herring <[email protected]>Signed-off-by Lakshmi Ramasubramanian <[email protected]>--- arch/powerpc/include/asm/kexec.h | 1 + arch/powerpc/kexec/elf_64.c | 30 ++++--- arch/powerpc/kexec/file_load.c | 132 +----------------------------- arch/powerpc/kexec/file_load_64.c | 3 + 4 files changed, 26 insertions(+), 140 deletions(-)
Signature · 2 lines
Thiago Jung Bauermann IBM Linux Technology Center
PATCH v18 6/11 powerpc: Move ima buffer fields to struct kimage
In reply to Lakshmi RamasubramanianThe fields ima_buffer_addr and ima_buffer_size in "struct kimage_arch" for powerpc are used to carry forward the IMA measurement list across kexec system call. These fields are not architecture specific, but are currently limited to powerpc.
arch_ima_add_kexec_buffer() defined in "arch/powerpc/kexec/ima.c" sets ima_buffer_addr and ima_buffer_size for the kexec system call. This function does not have architecture specific code, but is currently limited to powerpc.
Move ima_buffer_addr and ima_buffer_size to "struct kimage". Set ima_buffer_addr and ima_buffer_size in ima_add_kexec_buffer() in security/integrity/ima/ima_kexec.c.
--- arch/powerpc/include/asm/ima.h | 3 --- arch/powerpc/include/asm/kexec.h | 5 ----- arch/powerpc/kexec/ima.c | 29 ++++++----------------------- include/linux/kexec.h | 3 +++ security/integrity/ima/ima_kexec.c | 8 ++------ 5 files changed, 11 insertions(+), 37 deletions(-)
arch/powerpc/include/asm/ima.h +0 -3
@@ -14,9 +14,6 @@ static inline void remove_ima_buffer(void *fdt, int chosen_node) {}#endif #ifdef CONFIG_IMA_KEXEC -int arch_ima_add_kexec_buffer (struct kimage *image,unsigned long load_addr, -size_t size); -int setup_ima_buffer (const struct kimage *image,void *fdt,int chosen_node);#else static inline int setup_ima_buffer(const struct kimage *image, void *fdt,
arch/powerpc/include/asm/kexec.h +0 -5
@@ -112,11 +112,6 @@ struct kimage_arch {unsigned long elf_headers_sz;void *elf_headers;void *fdt; - -#ifdef CONFIG_IMA_KEXEC -phys_addr_t ima_buffer_addr; -size_t ima_buffer_size; -#endif }; char *setup_kdump_cmdline(struct kimage *image, char *cmdline,
arch/powerpc/kexec/ima.c +6 -23
@@ -128,23 +128,6 @@ void remove_ima_buffer(void *fdt, int chosen_node) }#ifdef CONFIG_IMA_KEXEC -/** -* arch_ima_add_kexec_buffer - do arch-specific steps to add the IMA buffer -* -* Architectures should use this function to pass on the IMA buffer -* information to the next kernel. -* -* Return: 0 on success, negative errno on error. -*/ -int arch_ima_add_kexec_buffer (struct kimage *image,unsigned long load_addr, -size_t size) -{ - image->arch.ima_buffer_addr = load_addr; - image->arch.ima_buffer_size = size; - -return 0 ; -} -static int write_number (void *p,u64 value,int cells) {if (cells ==1 ) {
@@ -180,7 +163,7 @@ int setup_ima_buffer(const struct kimage *image, void *fdt, int chosen_node)u8 value[16 ];remove_ima_buffer (fdt, chosen_node); -if (!image->arch.ima_buffer_size) +if (!image->ima_buffer_size)return 0 ; ret =get_addr_size_cells (&addr_cells, &size_cells);
@@ -192,11 +175,11 @@ int setup_ima_buffer(const struct kimage *image, void *fdt, int chosen_node)if (entry_size >sizeof (value))return -EINVAL ; - ret =write_number (value, image->arch.ima_buffer_addr, addr_cells); + ret =write_number (value, image->ima_buffer_addr, addr_cells);if (ret)return ret; - ret =write_number (value +4 * addr_cells, image->arch.ima_buffer_size, + ret =write_number (value +4 * addr_cells, image->ima_buffer_size, size_cells);if (ret)return ret;
@@ -206,13 +189,13 @@ int setup_ima_buffer(const struct kimage *image, void *fdt, int chosen_node)if (ret <0 )return -EINVAL ; - ret =fdt_add_mem_rsv (fdt, image->arch.ima_buffer_addr, - image->arch.ima_buffer_size); + ret =fdt_add_mem_rsv (fdt, image->ima_buffer_addr, + image->ima_buffer_size);if (ret)return -EINVAL ;pr_debug ("IMA buffer at 0x%llx, size = 0x%zx\n" , - image->arch.ima_buffer_addr, image->arch.ima_buffer_size); + image->ima_buffer_addr, image->ima_buffer_size);return 0 ; }
include/linux/kexec.h +3 -0
@@ -304,6 +304,9 @@ struct kimage {#ifdef CONFIG_IMA_KEXEC /* Virtual address of IMA measurement buffer for kexec syscall */ void *ima_buffer; + +phys_addr_t ima_buffer_addr; +size_t ima_buffer_size;#endif };
security/integrity/ima/ima_kexec.c +2 -6
@@ -123,12 +123,8 @@ void ima_add_kexec_buffer(struct kimage *image)return ; } - ret =arch_ima_add_kexec_buffer (image, kbuf.mem, kexec_segment_size); -if (ret) { -pr_err ("Error passing over kexec measurement buffer.\n" ); -return ; - } - + image->ima_buffer_addr = kbuf.mem; + image->ima_buffer_size = kexec_segment_size; image->ima_buffer = kexec_buffer; pr_debug("kexec measurement buffer for the loaded kernel at 0x%lx.\n",
Signature · 7 lines
2.30.0 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Re: [PATCH v18 06/11] powerpc: Move ima buffer fields to struct kimage
Quoted 18 lines · Lakshmi Ramasubramanian
The fields
ima_buffer_addrandima_buffer_sizein "structkimage_arch" for powerpc are used to carry forward the IMA measurement list across kexec system call. These fields are not architecture specific, but are currently limited to powerpc.
arch_ima_add_kexec_buffer()defined in "arch/powerpc/kexec/ima.c" setsima_buffer_addrandima_buffer_sizefor the kexec system call. This function does not have architecture specific code, but is currently limited to powerpc.Move
ima_buffer_addrandima_buffer_sizeto "struct kimage". Setima_buffer_addrandima_buffer_sizeinima_add_kexec_buffer()insecurity/integrity/ima/ima_kexec.c.Co-developed-by Prakhar Srivastava <[email protected]>Signed-off-by Prakhar Srivastava <[email protected]>Signed-off-by Lakshmi Ramasubramanian <[email protected]>Suggested-by Will Deacon <[email protected]>
Quoted 7 lines
--- arch/powerpc/include/asm/ima.h | 3 --- arch/powerpc/include/asm/kexec.h | 5 ----- arch/powerpc/kexec/ima.c | 29 ++++++----------------------- include/linux/kexec.h | 3 +++ security/integrity/ima/ima_kexec.c | 8 ++------ 5 files changed, 11 insertions(+), 37 deletions(-)
Signature · 2 lines
Thiago Jung Bauermann IBM Linux Technology Center
PATCH v18 7/11 powerpc: Enable passing IMA log to next kernel on kexec
In reply to Lakshmi RamasubramanianCONFIG_HAVE_IMA_KEXEC is enabled to indicate that the IMA measurement log information is present in the device tree. This should be selected only if CONFIG_IMA is enabled.
Update CONFIG_KEXEC_FILE to select CONFIG_HAVE_IMA_KEXEC, if CONFIG_IMA is enabled, to indicate that the IMA measurement log information is present in the device tree for powerpc.
--- arch/powerpc/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
arch/powerpc/Kconfig +1 -1
@@ -554,7 +554,7 @@ config KEXEC config KEXEC_FILE bool "kexec file based system call" select KEXEC_CORE - select HAVE_IMA_KEXEC + select HAVE_IMA_KEXEC if IMA select BUILD_BIN2C select KEXEC_ELF depends on PPC64
Signature · 7 lines
2.30.0 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
PATCH v18 8/11 powerpc: Move arch independent ima kexec functions to drivers/of/kexec.c
In reply to Lakshmi RamasubramanianThe functions defined in "arch/powerpc/kexec/ima.c" handle setting up and freeing the resources required to carry over the IMA measurement list from the current kernel to the next kernel across kexec system call. These functions do not have architecture specific code, but are currently limited to powerpc.
Move remove_ima_buffer() and setup_ima_buffer() calls into of_kexec_alloc_and_setup_fdt() defined in "drivers/of/kexec.c".
Move the remaining architecture independent functions from "arch/powerpc/kexec/ima.c" to "drivers/of/kexec.c".
Delete "arch/powerpc/kexec/ima.c" and "arch/powerpc/include/asm/ima.h". Remove references to the deleted files and functions in powerpc and in ima.
--- arch/powerpc/include/asm/ima.h | 27 ---- arch/powerpc/include/asm/kexec.h | 3 - arch/powerpc/kexec/Makefile | 7 - arch/powerpc/kexec/file_load.c | 25 --- arch/powerpc/kexec/file_load_64.c | 4 - arch/powerpc/kexec/ima.c | 202 ------------------------ drivers/of/kexec.c | 240 +++++++++++++++++++++++++++++ include/linux/of.h | 2 + security/integrity/ima/ima.h | 4 - security/integrity/ima/ima_kexec.c | 1 + 10 files changed, 243 insertions(+), 272 deletions(-) delete mode 100644 arch/powerpc/include/asm/ima.h delete mode 100644 arch/powerpc/kexec/ima.c
arch/powerpc/include/asm/ima.h deleted +0 -27
@@ -1,27 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef _ASM_POWERPC_IMA_H -#define _ASM_POWERPC_IMA_H - -struct kimage ; - -int ima_get_kexec_buffer (void **addr,size_t *size); -int ima_free_kexec_buffer (void ); - -#ifdef CONFIG_IMA -void remove_ima_buffer (void *fdt,int chosen_node); -#else -static inline void remove_ima_buffer (void *fdt,int chosen_node) {} -#endif - -#ifdef CONFIG_IMA_KEXEC -int setup_ima_buffer (const struct kimage *image,void *fdt,int chosen_node); -#else -static inline int setup_ima_buffer (const struct kimage *image,void *fdt, -int chosen_node) -{ -remove_ima_buffer (fdt, chosen_node); -return 0 ; -} -#endif /* CONFIG_IMA_KEXEC */ - -#endif /* _ASM_POWERPC_IMA_H */
arch/powerpc/include/asm/kexec.h +0 -3
@@ -119,9 +119,6 @@ char *setup_kdump_cmdline(struct kimage *image, char *cmdline,int setup_purgatory (struct kimage *image,const void *slave_code,const void *fdt,unsigned long kernel_load_addr,unsigned long fdt_load_addr); -int setup_new_fdt (const struct kimage *image,void *fdt, -unsigned long initrd_load_addr,unsigned long initrd_len, -const char *cmdline);int delete_fdt_mem_rsv (void *fdt,unsigned long start,unsigned long size);#ifdef CONFIG_PPC64
arch/powerpc/kexec/Makefile +0 -7
@@ -9,13 +9,6 @@ obj-$(CONFIG_PPC32) += relocate_32.o obj-$(CONFIG_KEXEC_FILE) += file_load.o ranges.o file_load_$(BITS).o elf_$(BITS).o -ifdef CONFIG_HAVE_IMA_KEXEC -ifdef CONFIG_IMA -obj-y += ima.o -endif -endif - - # Disable GCOV, KCOV & sanitizers in odd or sensitive code GCOV_PROFILE_core_$(BITS).o := n KCOV_INSTRUMENT_core_$(BITS).o := n
arch/powerpc/kexec/file_load.c +0 -25
@@ -19,7 +19,6 @@#include <linux/of_fdt.h> #include <linux/libfdt.h> #include <asm/setup.h> -#include <asm/ima.h> #define SLAVE_CODE_SIZE 256/* First 0x100 bytes */
@@ -140,27 +139,3 @@ int delete_fdt_mem_rsv(void *fdt, unsigned long start, unsigned long size)return -ENOENT ; } - -/* -* setup_new_fdt - modify /chosen and memory reservation for the next kernel -* @image: kexec image being loaded. -* @fdt: Flattened device tree for the next kernel. -* @initrd_load_addr: Address where the next initrd will be loaded. -* @initrd_len: Size of the next initrd, or 0 if there will be none. -* @cmdline: Command line for the next kernel, or NULL if there will -* be none. -* -* Return: 0 on success, or negative errno on error. -*/ -int setup_new_fdt (const struct kimage *image,void *fdt, -unsigned long initrd_load_addr,unsigned long initrd_len, -const char *cmdline) -{ -int ret; - - ret =setup_ima_buffer (image, fdt,fdt_path_offset (fdt,"/chosen" )); -if (ret) -pr_err ("Error setting up the new device tree.\n" ); - -return ret; -}
arch/powerpc/kexec/file_load_64.c +0 -4
@@ -944,10 +944,6 @@ int setup_new_fdt_ppc64(const struct kimage *image, void *fdt,struct crash_mem *umem =NULL , *rmem =NULL ;int i, nr_ranges, ret; - ret =setup_new_fdt (image, fdt, initrd_load_addr, initrd_len, cmdline); -if (ret) - goto out; -/* * Restrict memory usage for kdump kernel by setting up * usable memory ranges and memory reserve map.
arch/powerpc/kexec/ima.c deleted +0 -202
202 lines not on this page · raw message
drivers/of/kexec.c +240 -0
258 lines not on this page · raw message
include/linux/of.h +2 -0
@@ -565,6 +565,8 @@ void *of_kexec_alloc_and_setup_fdt(const struct kimage *image,unsigned long initrd_load_addr, unsigned long initrd_len, const char *cmdline, size_t extra_fdt_size); +int ima_get_kexec_buffer (void **addr,size_t *size); +int ima_free_kexec_buffer (void );#else /* CONFIG_OF */ static inline void of_core_init (void )
security/integrity/ima/ima.h +0 -4
@@ -24,10 +24,6 @@#include "../integrity.h" -#ifdef CONFIG_HAVE_IMA_KEXEC -#include <asm/ima.h> -#endif -enum ima_show_type {IMA_SHOW_BINARY ,IMA_SHOW_BINARY_NO_FIELD_LEN ,IMA_SHOW_BINARY_OLD_STRING_FMT ,IMA_SHOW_ASCII };enum tpm_pcrs {TPM_PCR0 =0 ,TPM_PCR8 =8 ,TPM_PCR10 =10 };
security/integrity/ima/ima_kexec.c +1 -0
@@ -10,6 +10,7 @@#include <linux/seq_file.h> #include <linux/vmalloc.h> #include <linux/kexec.h> +#include <linux/of.h> #include "ima.h" #ifdef CONFIG_IMA_KEXEC
Signature · 1 line
2.30.0
PATCH v18 9/11 kexec: Use fdt_appendprop_addrrange() to add ima buffer to FDT
In reply to Lakshmi Ramasubramanianfdt_appendprop_addrrange() function adds a property, with the given name, to the device tree at the given node offset, and also sets the address and size of the property. This function should be used to add "linux,ima-kexec-buffer" property to the device tree and set the address and size of the IMA measurement buffer, instead of using custom function.
Use fdt_appendprop_addrrange() to add "linux,ima-kexec-buffer" property to the device tree. This property holds the address and size of the IMA measurement buffer that needs to be passed from the current kernel to the next kernel across kexec system call.
Remove custom code that is used in setup_ima_buffer() to add "linux,ima-kexec-buffer" property to the device tree.
--- drivers/of/kexec.c | 57 ++++------------------------------------------ 1 file changed, 5 insertions(+), 52 deletions(-)
drivers/of/kexec.c +5 -52
@@ -216,36 +216,6 @@ static void remove_ima_buffer(void *fdt, int chosen_node) }#ifdef CONFIG_IMA_KEXEC -/** -* write_number - Convert number to big-endian format -* -* @p: Buffer to write the number to -* @value: Number to convert -* @cells: Number of cells -* -* Return: 0 on success, or negative errno on error. -*/ -static int write_number (void *p,u64 value,int cells) -{ -if (cells ==1 ) { -u32 tmp; - -if (value >U32_MAX ) -return -EINVAL ; - - tmp =cpu_to_be32 (value); -memcpy (p, &tmp,sizeof (tmp)); - }else if (cells ==2 ) { -u64 tmp; - - tmp =cpu_to_be64 (value); -memcpy (p, &tmp,sizeof (tmp)); - }else -return -EINVAL ; - -return 0 ; -} -/** * setup_ima_buffer - add IMA buffer information to the fdt * @image: kexec image being loaded.
@@ -257,32 +227,15 @@ static int write_number(void *p, u64 value, int cells)static int setup_ima_buffer (const struct kimage *image,void *fdt,int chosen_node) { -int ret, addr_cells, size_cells, entry_size; -u8 value[16 ]; +int ret;if (!image->ima_buffer_size)return 0 ; - ret =get_addr_size_cells (&addr_cells, &size_cells); -if (ret) -return ret; - - entry_size =4 * (addr_cells + size_cells); - -if (entry_size >sizeof (value)) -return -EINVAL ; - - ret =write_number (value, image->ima_buffer_addr, addr_cells); -if (ret) -return ret; - - ret =write_number (value +4 * addr_cells, image->ima_buffer_size, - size_cells); -if (ret) -return ret; - - ret =fdt_setprop (fdt, chosen_node,"linux,ima-kexec-buffer" , value, - entry_size); + ret =fdt_appendprop_addrrange (fdt,0 , chosen_node, +"linux,ima-kexec-buffer" , + image->ima_buffer_addr, + image->ima_buffer_size);if (ret <0 )return -EINVAL ;
Signature · 1 line
2.30.0
PATCH v18 10/11 powerpc: Delete unused function delete_fdt_mem_rsv()
In reply to Lakshmi Ramasubramaniandelete_fdt_mem_rsv() defined in "arch/powerpc/kexec/file_load.c" has been renamed to fdt_find_and_del_mem_rsv(), and moved to "drivers/of/kexec.c".
Remove delete_fdt_mem_rsv() in "arch/powerpc/kexec/file_load.c".
--- arch/powerpc/include/asm/kexec.h | 1 - arch/powerpc/kexec/file_load.c | 32 -------------------------------- 2 files changed, 33 deletions(-)
arch/powerpc/include/asm/kexec.h +0 -1
@@ -119,7 +119,6 @@ char *setup_kdump_cmdline(struct kimage *image, char *cmdline,int setup_purgatory (struct kimage *image,const void *slave_code,const void *fdt,unsigned long kernel_load_addr,unsigned long fdt_load_addr); -int delete_fdt_mem_rsv (void *fdt,unsigned long start,unsigned long size);#ifdef CONFIG_PPC64 struct kexec_buf ;
arch/powerpc/kexec/file_load.c +0 -32
@@ -107,35 +107,3 @@ int setup_purgatory(struct kimage *image, const void *slave_code,return 0 ; } - -/** -* delete_fdt_mem_rsv - delete memory reservation with given address and size -* -* Return: 0 on success, or negative errno on error. -*/ -int delete_fdt_mem_rsv (void *fdt,unsigned long start,unsigned long size) -{ -int i, ret, num_rsvs =fdt_num_mem_rsv (fdt); - -for (i =0 ; i < num_rsvs; i++) { -uint64_t rsv_start, rsv_size; - - ret =fdt_get_mem_rsv (fdt, i, &rsv_start, &rsv_size); -if (ret) { -pr_err ("Malformed device tree.\n" ); -return -EINVAL ; - } - -if (rsv_start == start && rsv_size == size) { - ret =fdt_del_mem_rsv (fdt, i); -if (ret) { -pr_err ("Error deleting device tree reservation.\n" ); -return -EINVAL ; - } - -return 0 ; - } - } - -return -ENOENT ; -}
Signature · 1 line
2.30.0
PATCH v18 11/11 arm64: Enable passing IMA log to next kernel on kexec
In reply to Lakshmi RamasubramanianUpdate CONFIG_KEXEC_FILE to select CONFIG_HAVE_IMA_KEXEC, if CONFIG_IMA is enabled, to indicate that the IMA measurement log information is present in the device tree for ARM64.
--- arch/arm64/Kconfig | 1 + 1 file changed, 1 insertion(+)
arch/arm64/Kconfig +1 -0
@@ -1093,6 +1093,7 @@ config KEXEC config KEXEC_FILE bool "kexec file based system call" select KEXEC_CORE + select HAVE_IMA_KEXEC if IMA help This is new version of kexec system call. This system call is file based and takes file descriptors as system call argument
Signature · 1 line
2.30.0
Rob Herring
maintainerQuoted 185 lines · Lakshmi Ramasubramanian
On kexec file load Integrity Measurement Architecture (IMA) subsystem may verify the IMA signature of the kernel and initramfs, and measure it. The command line parameters passed to the kernel in the kexec call may also be measured by IMA. A remote attestation service can verify a TPM quote based on the TPM event log, the IMA measurement list, and the TPM PCR data. This can be achieved only if the IMA measurement log is carried over from the current kernel to the next kernel across the kexec call.
powerpc already supports carrying forward the IMA measurement log on kexec. This patch set adds support for carrying forward the IMA measurement log on kexec on ARM64.
This patch set moves the platform independent code defined for powerpc such that it can be reused for other platforms as well. A chosen node "linux,ima-kexec-buffer" is added to the DTB for ARM64 to hold the address and the size of the memory reserved to carry the IMA measurement log.
This patch set has been tested for ARM64 platform using QEMU. I would like help from the community for testing this change on powerpc. Thanks.
This patch set is based on
commitf31e3386a4e9("ima: Free IMA measurement buffer after kexec syscall") in https://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity.git
"ima-kexec-fixes" branch.Changelog:
v18
- Added a parameter toof_kexec_alloc_and_setup_fdt()for the caller to specify additional space needed for the FDT buffer
- Renamed arm64 and powerpc ELF buffer address field in "structkimage_arch" toelf_load_addrto matchx86_64name.
- Removedof_ima_add_kexec_buffer()and instead directly setima_buffer_addrandima_buffer_sizeinima_add_kexec_buffer()
- MovedFDT_EXTRA_SPACEdefinition frominclude/linux/of.htodrivers/of/kexec.cv17
- Renamedof_kexec_setup_new_fdt()toof_kexec_alloc_and_setup_fdt(), and moved memory allocation for the new FDT to this function.v16
- Defined functions to allocate and free buffer for FDT for powerpcand arm64.- Moved
ima_buffer_addrandima_buffer_sizefields from "structkimage_arch" in powerpc to "struct kimage"
v15
- Included Rob's patches in the patch set, and rebased the changes to "next-integrity" branch.
- Allocate memory for DTB, on arm64, usingkmalloc()instead ofvmalloc()to keep it consistent with powerpc implementation.
- Callof_kexec_setup_new_fdt()fromsetup_new_fdt_ppc64()and removesetup_new_fdt()in the same patch to keep it bisect safe.v14
- SelectCONFIG_HAVE_IMA_KEXECforCONFIG_KEXEC_FILE, for powerpc and arm64, ifCONFIG_IMAis enabled.
- UseIS_ENABLED()macro instead of "#ifdef" inremove_ima_buffer(),ima_get_kexec_buffer(), andima_free_kexec_buffer().
- Callof_kexec_setup_new_fdt()fromsetup_new_fdt_ppc64()and removesetup_new_fdt()in "arch/powerpc/kexec/file_load.c".v13
- Moved the arch independent functions todrivers/of/kexec.cand then refactored the code.
- Movedarch_ima_add_kexec_buffer()tosecurity/integrity/ima/ima_kexec.cv12
- Usefdt_appendprop_addrrange()insetup_ima_buffer()to setup the IMA measurement list property in the device tree.
- Moved architecture independent functions from "arch/powerpc/kexec/ima.c" to "drivers/of/kexec."
- Deleted "arch/powerpc/kexec/ima.c" and "arch/powerpc/include/asm/ima.h".v11
- Rebased the changes on the kexec code refactoring done by Rob Herring in his "dt/kexec" branch
- Removed "extern" keyword in function declarations
- Removed unnecessary header files included in C files
- Updated patch descriptions per Thiago's commentsv10
- Moveddelete_fdt_mem_rsv(),remove_ima_buffer(),get_ima_kexec_buffer, andget_root_addr_size_cells()todrivers/of/kexec.c
- Movedarch_ima_add_kexec_buffer()tosecurity/integrity/ima/ima_kexec.c
- Conditionally define IMA buffer fields in structkimage_archv9
- Moveddelete_fdt_mem_rsv()todrivers/of/kexec_fdt.c
- Defined a new functionget_ima_kexec_buffer()indrivers/of/ima_kexec.cto replacedo_get_kexec_buffer()
- Changedremove_ima_kexec_buffer()to the original function nameremove_ima_buffer()
- Movedremove_ima_buffer()todrivers/of/ima_kexec.c
- Movedima_get_kexec_buffer()andima_free_kexec_buffer()tosecurity/integrity/ima/ima_kexec.cv8:
- Movedremove_ima_kexec_buffer(),do_get_kexec_buffer(), anddelete_fdt_mem_rsv()todrivers/of/fdt.c
- Movedima_dump_measurement_list()andima_add_kexec_buffer()back tosecurity/integrity/ima/ima_kexec.cv7:
- Renamedremove_ima_buffer()toremove_ima_kexec_buffer()and moved this function definition to kernel.
- Moveddelete_fdt_mem_rsv()definition to kernel
- Movedima_dump_measurement_list()andima_add_kexec_buffer()to a new file namelyima_kexec_fdt.cin IMAv6:
- Remove any existingFDT_PROP_IMA_KEXEC_BUFFERproperty in the device tree and also its corresponding memory reservation in the currently running kernel.
- Moved the functionremove_ima_buffer()defined for powerpc to IMA and renamed the function toima_remove_kexec_buffer(). Also, moveddelete_fdt_mem_rsv()from powerpc to IMA.v5:
- Mergedget_addr_size_cells()anddo_get_kexec_buffer()into a single function when moving the arch independent code from powerpc to IMA
- Reverted the change to use FDT functions in powerpc code and added back the original code inget_addr_size_cells()anddo_get_kexec_buffer()for powerpc.
- Addedfdt_add_mem_rsv()for ARM64 to reserve the memory for the IMA log buffer during kexec.
- Fixed the warning reported by kernel test bot for ARM64arch_ima_add_kexec_buffer()- moved this function to a new file namelyarch/arm64/kernel/ima_kexec.cv4:
- Submitting the patch series on behalf of the original author Prakhar Srivastava <[email protected]>
- MovedFDT_PROP_IMA_KEXEC_BUFFER("linux,ima-kexec-buffer") tolibfdt.hso that it can be shared by multiple platforms.v3:
Breakup patches further into separate patches.
- Refactoring non architecture specific code out of powerpc
- Update powerpc related code to use fdt functions
- Update IMA buffer read related code to use of functions
- Add support to store the memory information of the IMA measurement logs to be carried forward.
- Update the property strings to align with documented nodes
https://github.com/devicetree-org/dt-schema/pull/46v2:
Break patches into separate patches.
- Powerpc related Refactoring
- Updating the docuemntation for chosen node
- Updating arm64 to support IMA buffer passv1:
Refactoring carrying over IMA measuremnet logs over Kexec. This patch
moves the non-architecture specific code out of powerpc and adds to security/ima.(Suggested by Thiago)
Add Documentation regarding the ima-kexec-buffer node in the chosen
node documentationv0:
Add a layer of abstraction to use the memory reserved by device tree
for ima buffer pass.
Add support for ima buffer pass using reserved memory for arm64 kexec.
Update the arch sepcific code path in kexec file load to store the ima buffer in the reserved memory. The same reserved memory is read on kexec or cold boot.Lakshmi Ramasubramanian (7):
arm64: Rename kexecelf_headers_memtoelf_load_addr
powerpc: Move ima buffer fields to struct kimage
powerpc: Enable passing IMA log to next kernel on kexec
powerpc: Move arch independent ima kexec functions to
drivers/of/kexec.c
kexec: Usefdt_appendprop_addrrange()to add ima buffer to FDT
powerpc: Delete unused functiondelete_fdt_mem_rsv()
arm64: Enable passing IMA log to next kernel on kexec
Quoted 5 lines
Rob Herring (4):
powerpc: Rename kexecelfcorehdr_addrtoelf_load_addr
of: Add a common kexec FDT setup function
arm64: Use commonof_kexec_alloc_and_setup_fdt()
powerpc: Use commonof_kexec_alloc_and_setup_fdt()
I've applied the series. The merge conflict is not too bad, but will need a follow on patch to change the powerpc FDT size calculation (dropping the current FDT's size out).
Thanks for persisting!
Rob