ARM: dts: imx53-qsb: Describe the esdhc1 card detect pin
Subsystems (2)
Fabio Estevam
reviewerPATCH 1/1 ARM: dts: imx53-qsb: Describe the esdhc1 card detect pin
The micro SD card slot uses GPIO3_13 as card detect pin, so describe it in the devicetree.
This was noticed when converting imx53-qsb board to driver model in U-Boot as the micro SD card was not getting detected.
Signed-off-by Fabio Estevam <[email protected]>
--- arch/arm/boot/dts/imx53-qsb-common.dtsi | 2 ++ 1 file changed, 2 insertions(+)
arch/arm/boot/dts/imx53-qsb-common.dtsi +2 -0
@@ -142,6 +142,7 @@ &cpu0 { &esdhc1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_esdhc1>; + cd-gpios = <&gpio3 13 GPIO_ACTIVE_LOW>; status = "okay"; };
@@ -209,6 +210,7 @@ MX53_PAD_SD1_DATA2__ESDHC1_DAT2 0x1d5 MX53_PAD_SD1_DATA3__ESDHC1_DAT3 0x1d5 MX53_PAD_SD1_CMD__ESDHC1_CMD 0x1d5 MX53_PAD_SD1_CLK__ESDHC1_CLK 0x1d5 + MX53_PAD_EIM_DA13__GPIO3_13 0xe4 >; };
Signature · 7 lines
2.25.1 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Shawn Guo
AppliedQuoted 7 lines · Fabio Estevam
The micro SD card slot uses
GPIO3_13as card detect pin, so describe it in the devicetree.This was noticed when converting imx53-qsb board to driver model in U-Boot as the micro SD card was not getting detected.
Signed-off-by Fabio Estevam <[email protected]>
Applied, thanks.
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel