Skip to contentSkip to conversation

platform/x86: hp-wmi: add platform profile support

PATCH In review Elia Devito 3 participants 6 messages Feb 21, 2021 – Mar 4, 2021 x86 platform drivers

lore
Share & tools
lore
#0 lore raw

PATCH 2/2 platform/x86: hp-wmi: add platform profile support

Implement support for cool, balanced and performance thermal profile

---
the "quiet" profile will be implemented with a further patch

 drivers/platform/x86/hp-wmi.c | 96 +++++++++++++++++++++++++++++++++--
 1 file changed, 91 insertions(+), 5 deletions(-)
drivers/platform/x86/hp-wmi.c +91 -5
index 6d7b91b8109b..d983267b252b 100644
@@ -21,6 +21,7 @@
 #include <linux/input.h>
 #include <linux/input/sparse-keymap.h>
 #include <linux/platform_device.h>
+#include <linux/platform_profile.h>
 #include <linux/acpi.h>
 #include <linux/rfkill.h>
 #include <linux/string.h>
@@ -119,6 +120,12 @@ enum hp_wireless2_bits {
 	HPWMI_POWER_FW_OR_HW	= HPWMI_POWER_BIOS | HPWMI_POWER_HARD,
 };
 
+enum hp_thermal_profile {
+	HP_THERMAL_PROFILE_PERFORMANCE	= 0x00,
+	HP_THERMAL_PROFILE_DEFAULT		= 0x01,
+	HP_THERMAL_PROFILE_COOL			= 0x02
+};
+
 #define IS_HWBLOCKED(x) ((x & HPWMI_POWER_FW_OR_HW) != HPWMI_POWER_FW_OR_HW)
 #define IS_SWBLOCKED(x) !(x & HPWMI_POWER_SOFT)
 
@@ -159,6 +166,7 @@ static const struct key_entry hp_wmi_keymap[] = {
 
 static struct input_dev *hp_wmi_input_dev;
 static struct platform_device *hp_wmi_platform_dev;
+static struct platform_profile_handler platform_profile_handler;
 
 static struct rfkill *wifi_rfkill;
 static struct rfkill *bluetooth_rfkill;
@@ -869,23 +877,101 @@ static int __init hp_wmi_rfkill2_setup(struct platform_device *device)
 	return err;
 }
 
-static int thermal_profile_setup(struct platform_device *device)
+static int thermal_profile_get(void)
 {
-	int err, tp;
+	int tp;
 
 	tp = hp_wmi_read_int(HPWMI_THERMAL_PROFILE_QUERY);
 	if (tp < 0)
 		return tp;
 
+	return tp;
+}
+
+static int thermal_profile_set(int thermal_profile)
+{
+	int err;
+
+	err = hp_wmi_perform_query(HPWMI_THERMAL_PROFILE_QUERY, HPWMI_WRITE, &thermal_profile,
+							   sizeof(thermal_profile), 0);
+	if (err)
+		return err;
+
+	return 0;
+}
+
+static int platform_profile_get(struct platform_profile_handler *pprof,
+				enum platform_profile_option *profile)
+{
+	int tp = thermal_profile_get();
+
+	switch (tp) {
+	case HP_THERMAL_PROFILE_PERFORMANCE:
+		*profile =  PLATFORM_PROFILE_PERFORMANCE;
+		break;
+	case HP_THERMAL_PROFILE_DEFAULT:
+		*profile =  PLATFORM_PROFILE_BALANCED;
+		break;
+	case HP_THERMAL_PROFILE_COOL:
+		*profile =  PLATFORM_PROFILE_COOL;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int platform_profile_set(struct platform_profile_handler *pprof,
+				enum platform_profile_option profile)
+{
+	int err, tp;
+
+	switch (profile) {
+	case PLATFORM_PROFILE_PERFORMANCE:
+		tp =  HP_THERMAL_PROFILE_PERFORMANCE;
+		break;
+	case PLATFORM_PROFILE_BALANCED:
+		tp =  HP_THERMAL_PROFILE_DEFAULT;
+		break;
+	case PLATFORM_PROFILE_COOL:
+		tp =  HP_THERMAL_PROFILE_COOL;
+		break;
+	default:
+		return -EOPNOTSUPP;
+	}
+
+	err = thermal_profile_set(tp);
+	if (err)
+		return err;
+
+	return 0;
+}
+
+static int thermal_profile_setup(void)
+{
+	int err, tp;
+
+	tp = thermal_profile_get();
+	if (tp < 0)
+		return tp;
+
 	/*
 	 * call thermal profile write command to ensure that the firmware correctly
 	 * sets the OEM variables for the DPTF
 	 */
-	err = hp_wmi_perform_query(HPWMI_THERMAL_PROFILE_QUERY, HPWMI_WRITE, &tp,
-							   sizeof(tp), 0);
+	err = thermal_profile_set(tp);
 	if (err)
 		return err;
 
+	platform_profile_handler.profile_get = platform_profile_get,
+	platform_profile_handler.profile_set = platform_profile_set,
+
+	set_bit(PLATFORM_PROFILE_COOL, platform_profile_handler.choices);
+	set_bit(PLATFORM_PROFILE_BALANCED, platform_profile_handler.choices);
+	set_bit(PLATFORM_PROFILE_PERFORMANCE, platform_profile_handler.choices);
+
+	platform_profile_register(&platform_profile_handler);
 	return 0;
 }
 
@@ -900,7 +986,7 @@ static int __init hp_wmi_bios_setup(struct platform_device *device)
 	if (hp_wmi_rfkill_setup(device))
 		hp_wmi_rfkill2_setup(device);
 
-	thermal_profile_setup(device);
+	thermal_profile_setup();
 
 	return 0;
 }
Signature · 1 line
2.29.2
#1 lore raw

PATCH v2 2/2 platform/x86: hp-wmi: add platform profile support

Implement support for cool, balanced and performance thermal profile

---
the "quiet" profile will be implemented with a further patch

v2: added platform_profile_remove() missing call

 drivers/platform/x86/hp-wmi.c | 103 ++++++++++++++++++++++++++++++++--
 1 file changed, 98 insertions(+), 5 deletions(-)
drivers/platform/x86/hp-wmi.c +98 -5
index 6d7b91b8109b..a33203d61cf0 100644
@@ -21,6 +21,7 @@
 #include <linux/input.h>
 #include <linux/input/sparse-keymap.h>
 #include <linux/platform_device.h>
+#include <linux/platform_profile.h>
 #include <linux/acpi.h>
 #include <linux/rfkill.h>
 #include <linux/string.h>
@@ -119,6 +120,12 @@ enum hp_wireless2_bits {
 	HPWMI_POWER_FW_OR_HW	= HPWMI_POWER_BIOS | HPWMI_POWER_HARD,
 };
 
+enum hp_thermal_profile {
+	HP_THERMAL_PROFILE_PERFORMANCE	= 0x00,
+	HP_THERMAL_PROFILE_DEFAULT		= 0x01,
+	HP_THERMAL_PROFILE_COOL			= 0x02
+};
+
 #define IS_HWBLOCKED(x) ((x & HPWMI_POWER_FW_OR_HW) != HPWMI_POWER_FW_OR_HW)
 #define IS_SWBLOCKED(x) !(x & HPWMI_POWER_SOFT)
 
@@ -159,6 +166,8 @@ static const struct key_entry hp_wmi_keymap[] = {
 
 static struct input_dev *hp_wmi_input_dev;
 static struct platform_device *hp_wmi_platform_dev;
+static struct platform_profile_handler platform_profile_handler;
+static int platform_profile_support = 0;
 
 static struct rfkill *wifi_rfkill;
 static struct rfkill *bluetooth_rfkill;
@@ -869,11 +878,80 @@ static int __init hp_wmi_rfkill2_setup(struct platform_device *device)
 	return err;
 }
 
-static int thermal_profile_setup(struct platform_device *device)
+static int thermal_profile_get(void)
 {
-	int err, tp;
+	int tp;
 
 	tp = hp_wmi_read_int(HPWMI_THERMAL_PROFILE_QUERY);
+
+	return tp;
+}
+
+static int thermal_profile_set(int thermal_profile)
+{
+	int err;
+
+	err = hp_wmi_perform_query(HPWMI_THERMAL_PROFILE_QUERY, HPWMI_WRITE, &thermal_profile,
+							   sizeof(thermal_profile), 0);
+	if (err)
+		return err;
+
+	return 0;
+}
+
+static int platform_profile_get(struct platform_profile_handler *pprof,
+				enum platform_profile_option *profile)
+{
+	int tp = thermal_profile_get();
+
+	switch (tp) {
+	case HP_THERMAL_PROFILE_PERFORMANCE:
+		*profile =  PLATFORM_PROFILE_PERFORMANCE;
+		break;
+	case HP_THERMAL_PROFILE_DEFAULT:
+		*profile =  PLATFORM_PROFILE_BALANCED;
+		break;
+	case HP_THERMAL_PROFILE_COOL:
+		*profile =  PLATFORM_PROFILE_COOL;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int platform_profile_set(struct platform_profile_handler *pprof,
+				enum platform_profile_option profile)
+{
+	int err, tp;
+
+	switch (profile) {
+	case PLATFORM_PROFILE_PERFORMANCE:
+		tp =  HP_THERMAL_PROFILE_PERFORMANCE;
+		break;
+	case PLATFORM_PROFILE_BALANCED:
+		tp =  HP_THERMAL_PROFILE_DEFAULT;
+		break;
+	case PLATFORM_PROFILE_COOL:
+		tp =  HP_THERMAL_PROFILE_COOL;
+		break;
+	default:
+		return -EOPNOTSUPP;
+	}
+
+	err = thermal_profile_set(tp);
+	if (err)
+		return err;
+
+	return 0;
+}
+
+static int thermal_profile_setup(void)
+{
+	int err, tp;
+
+	tp = thermal_profile_get();
 	if (tp < 0)
 		return tp;
 
@@ -881,11 +959,23 @@ static int thermal_profile_setup(struct platform_device *device)
 	 * call thermal profile write command to ensure that the firmware correctly
 	 * sets the OEM variables for the DPTF
 	 */
-	err = hp_wmi_perform_query(HPWMI_THERMAL_PROFILE_QUERY, HPWMI_WRITE, &tp,
-							   sizeof(tp), 0);
+	err = thermal_profile_set(tp);
 	if (err)
 		return err;
 
+	platform_profile_handler.profile_get = platform_profile_get,
+	platform_profile_handler.profile_set = platform_profile_set,
+
+	set_bit(PLATFORM_PROFILE_COOL, platform_profile_handler.choices);
+	set_bit(PLATFORM_PROFILE_BALANCED, platform_profile_handler.choices);
+	set_bit(PLATFORM_PROFILE_PERFORMANCE, platform_profile_handler.choices);
+
+	err = platform_profile_register(&platform_profile_handler);
+	if (err)
+		return err;
+
+	platform_profile_support = 1;
+
 	return 0;
 }
 
@@ -900,7 +990,7 @@ static int __init hp_wmi_bios_setup(struct platform_device *device)
 	if (hp_wmi_rfkill_setup(device))
 		hp_wmi_rfkill2_setup(device);
 
-	thermal_profile_setup(device);
+	thermal_profile_setup();
 
 	return 0;
 }
@@ -1030,5 +1120,8 @@ static void __exit hp_wmi_exit(void)
 		platform_device_unregister(hp_wmi_platform_dev);
 		platform_driver_unregister(&hp_wmi_driver);
 	}
+
+	if (platform_profile_support)
+		platform_profile_remove();
 }
 module_exit(hp_wmi_exit);
Signature · 1 line
2.29.2
#2 lore raw

Hi

2021. február 21., vasárnap 22:30 keltezéssel, Elia Devito írta:

Quoted 37 lines

Implement support for cool, balanced and performance thermal profile

---
the "quiet" profile will be implemented with a further patch

v2: added platform_profile_remove() missing call

 drivers/platform/x86/hp-wmi.c | 103 ++++++++++++++++++++++++++++++++--
 1 file changed, 98 insertions(+), 5 deletions(-)
drivers/platform/x86/hp-wmi.c +7 -0
index 6d7b91b8109b..a33203d61cf0 100644
@@ -21,6 +21,7 @@
 #include <linux/input.h>
 #include <linux/input/sparse-keymap.h>
 #include <linux/platform_device.h>
+#include <linux/platform_profile.h>
 #include <linux/acpi.h>
 #include <linux/rfkill.h>
 #include <linux/string.h>
@@ -119,6 +120,12 @@ enum hp_wireless2_bits {
 	HPWMI_POWER_FW_OR_HW	= HPWMI_POWER_BIOS | HPWMI_POWER_HARD,
 };
 
+enum hp_thermal_profile {
+	HP_THERMAL_PROFILE_PERFORMANCE	= 0x00,
+	HP_THERMAL_PROFILE_DEFAULT		= 0x01,
+	HP_THERMAL_PROFILE_COOL			= 0x02
+};
+
 #define IS_HWBLOCKED(x) ((x & HPWMI_POWER_FW_OR_HW) != HPWMI_POWER_FW_OR_HW)
 #define IS_SWBLOCKED(x) !(x & HPWMI_POWER_SOFT)
 

drivers/platform/x86/hp-wmi.c static const struct key_entry hp_wmi_keymap[] = { · line 170

Quoted 5 lines
drivers/platform/x86/hp-wmi.c +2 -0
@@ -159,6 +166,8 @@ static const struct key_entry hp_wmi_keymap[] = {
 
 static struct input_dev *hp_wmi_input_dev;
 static struct platform_device *hp_wmi_platform_dev;
+static struct platform_profile_handler platform_profile_handler;
+static int platform_profile_support = 0;

I suggest you use bool and omit the initialization (checkpatch will warn you about that).

Quoted 7 lines
drivers/platform/x86/hp-wmi.c +0 -0
 static struct rfkill *wifi_rfkill;
 static struct rfkill *bluetooth_rfkill;
@@ -869,11 +878,80 @@ static int __init hp_wmi_rfkill2_setup(struct platform_device *device)
 	return err;
 }
 

drivers/platform/x86/hp-wmi.c static int __init hp_wmi_rfkill2_setup(struct platform_device *device) · line 888

Quoted 10 lines
drivers/platform/x86/hp-wmi.c +5 -2
-static int thermal_profile_setup(struct platform_device *device)
+static int thermal_profile_get(void)
 {
-	int err, tp;
+	int tp;
 
 	tp = hp_wmi_read_int(HPWMI_THERMAL_PROFILE_QUERY);
+
+	return tp;
+}

Is there any reason why you didn't write

  return hp_wmi_read_int(...);

?

drivers/platform/x86/hp-wmi.c static int __init hp_wmi_rfkill2_setup(struct platform_device *device) · line 900

Quoted 12 lines
drivers/platform/x86/hp-wmi.c +12 -0
+
+static int thermal_profile_set(int thermal_profile)
+{
+	int err;
+
+	err = hp_wmi_perform_query(HPWMI_THERMAL_PROFILE_QUERY, HPWMI_WRITE, &thermal_profile,
+							   sizeof(thermal_profile), 0);
+	if (err)
+		return err;
+
+	return 0;
+}

Here as well?

Quoted 8 lines
drivers/platform/x86/hp-wmi.c +8 -0
+
+static int platform_profile_get(struct platform_profile_handler *pprof,
+				enum platform_profile_option *profile)
+{
+	int tp = thermal_profile_get();
+
+	switch (tp) {
+	case HP_THERMAL_PROFILE_PERFORMANCE:

drivers/platform/x86/hp-wmi.c static int __init hp_wmi_rfkill2_setup(struct platform_device *device) · line 918

Quoted 10 lines
drivers/platform/x86/hp-wmi.c +10 -0
+		*profile =  PLATFORM_PROFILE_PERFORMANCE;
+		break;
+	case HP_THERMAL_PROFILE_DEFAULT:
+		*profile =  PLATFORM_PROFILE_BALANCED;
+		break;
+	case HP_THERMAL_PROFILE_COOL:
+		*profile =  PLATFORM_PROFILE_COOL;
+		break;
+	default:
+		return -EINVAL;

I think error values (tp < 0) could possibly be propagated.

Quoted 75 lines
drivers/platform/x86/hp-wmi.c +51 -3
+	}
+
+	return 0;
+}
+
+static int platform_profile_set(struct platform_profile_handler *pprof,
+				enum platform_profile_option profile)
+{
+	int err, tp;
+
+	switch (profile) {
+	case PLATFORM_PROFILE_PERFORMANCE:
+		tp =  HP_THERMAL_PROFILE_PERFORMANCE;
+		break;
+	case PLATFORM_PROFILE_BALANCED:
+		tp =  HP_THERMAL_PROFILE_DEFAULT;
+		break;
+	case PLATFORM_PROFILE_COOL:
+		tp =  HP_THERMAL_PROFILE_COOL;
+		break;
+	default:
+		return -EOPNOTSUPP;
+	}
+
+	err = thermal_profile_set(tp);
+	if (err)
+		return err;
+
+	return 0;
+}
+
+static int thermal_profile_setup(void)
+{
+	int err, tp;
+
+	tp = thermal_profile_get();
 	if (tp < 0)
 		return tp;
 
@@ -881,11 +959,23 @@ static int thermal_profile_setup(struct platform_device *device)
 	 * call thermal profile write command to ensure that the firmware correctly
 	 * sets the OEM variables for the DPTF
 	 */
-	err = hp_wmi_perform_query(HPWMI_THERMAL_PROFILE_QUERY, HPWMI_WRITE, &tp,
-							   sizeof(tp), 0);
+	err = thermal_profile_set(tp);
 	if (err)
 		return err;
 
+	platform_profile_handler.profile_get = platform_profile_get,
+	platform_profile_handler.profile_set = platform_profile_set,
+
+	set_bit(PLATFORM_PROFILE_COOL, platform_profile_handler.choices);
+	set_bit(PLATFORM_PROFILE_BALANCED, platform_profile_handler.choices);
+	set_bit(PLATFORM_PROFILE_PERFORMANCE, platform_profile_handler.choices);
+
+	err = platform_profile_register(&platform_profile_handler);
+	if (err)
+		return err;
+
+	platform_profile_support = 1;
+
 	return 0;
 }
 
@@ -900,7 +990,7 @@ static int __init hp_wmi_bios_setup(struct platform_device *device)
 	if (hp_wmi_rfkill_setup(device))
 		hp_wmi_rfkill2_setup(device);
 
-	thermal_profile_setup(device);
+	thermal_profile_setup();
 
 	return 0;
 }

drivers/platform/x86/hp-wmi.c static void __exit hp_wmi_exit(void) · line 1125

Quoted 6 lines
drivers/platform/x86/hp-wmi.c +3 -0
@@ -1030,5 +1120,8 @@ static void __exit hp_wmi_exit(void)
 		platform_device_unregister(hp_wmi_platform_dev);
 		platform_driver_unregister(&hp_wmi_driver);
 	}
+
+	if (platform_profile_support)
+		platform_profile_remove();

I personally don't like the asymmetry that hp_wmi_bios_setup() registers (even if only indirectly), but hp_wmi_exit() removes. I'd put this in hp_wmi_bios_remove().

Quoted 4 lines
drivers/platform/x86/hp-wmi.c +0 -1
 }
 module_exit(hp_wmi_exit);
--

2.29.2

Regards,
Barnabás Pőcze

#3 lore raw

PATCH v3 2/2 platform/x86: hp-wmi: add platform profile support

Implement support for cool, balanced and performance thermal profile

---
the "quiet" profile will be implemented with a further patch

v2: added platform_profile_remove() missing call
v3: apply Barnabás suggestions

 drivers/platform/x86/hp-wmi.c | 97 +++++++++++++++++++++++++++++++++--
 1 file changed, 92 insertions(+), 5 deletions(-)
drivers/platform/x86/hp-wmi.c +92 -5
index 6d7b91b8109b..027a1467d009 100644
@@ -21,6 +21,7 @@
 #include <linux/input.h>
 #include <linux/input/sparse-keymap.h>
 #include <linux/platform_device.h>
+#include <linux/platform_profile.h>
 #include <linux/acpi.h>
 #include <linux/rfkill.h>
 #include <linux/string.h>
@@ -119,6 +120,12 @@ enum hp_wireless2_bits {
 	HPWMI_POWER_FW_OR_HW	= HPWMI_POWER_BIOS | HPWMI_POWER_HARD,
 };
 
+enum hp_thermal_profile {
+	HP_THERMAL_PROFILE_PERFORMANCE	= 0x00,
+	HP_THERMAL_PROFILE_DEFAULT		= 0x01,
+	HP_THERMAL_PROFILE_COOL			= 0x02
+};
+
 #define IS_HWBLOCKED(x) ((x & HPWMI_POWER_FW_OR_HW) != HPWMI_POWER_FW_OR_HW)
 #define IS_SWBLOCKED(x) !(x & HPWMI_POWER_SOFT)
 
@@ -159,6 +166,8 @@ static const struct key_entry hp_wmi_keymap[] = {
 
 static struct input_dev *hp_wmi_input_dev;
 static struct platform_device *hp_wmi_platform_dev;
+static struct platform_profile_handler platform_profile_handler;
+static bool platform_profile_support;
 
 static struct rfkill *wifi_rfkill;
 static struct rfkill *bluetooth_rfkill;
@@ -869,11 +878,74 @@ static int __init hp_wmi_rfkill2_setup(struct platform_device *device)
 	return err;
 }
 
-static int thermal_profile_setup(struct platform_device *device)
+static int thermal_profile_get(void)
+{
+	return hp_wmi_read_int(HPWMI_THERMAL_PROFILE_QUERY);
+}
+
+static int thermal_profile_set(int thermal_profile)
+{
+	return hp_wmi_perform_query(HPWMI_THERMAL_PROFILE_QUERY, HPWMI_WRITE, &thermal_profile,
+							   sizeof(thermal_profile), 0);
+}
+
+static int platform_profile_get(struct platform_profile_handler *pprof,
+				enum platform_profile_option *profile)
+{
+	int tp;
+
+	tp = thermal_profile_get();
+	if (tp < 0)
+		return tp;
+
+	switch (tp) {
+	case HP_THERMAL_PROFILE_PERFORMANCE:
+		*profile =  PLATFORM_PROFILE_PERFORMANCE;
+		break;
+	case HP_THERMAL_PROFILE_DEFAULT:
+		*profile =  PLATFORM_PROFILE_BALANCED;
+		break;
+	case HP_THERMAL_PROFILE_COOL:
+		*profile =  PLATFORM_PROFILE_COOL;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int platform_profile_set(struct platform_profile_handler *pprof,
+				enum platform_profile_option profile)
 {
 	int err, tp;
 
-	tp = hp_wmi_read_int(HPWMI_THERMAL_PROFILE_QUERY);
+	switch (profile) {
+	case PLATFORM_PROFILE_PERFORMANCE:
+		tp =  HP_THERMAL_PROFILE_PERFORMANCE;
+		break;
+	case PLATFORM_PROFILE_BALANCED:
+		tp =  HP_THERMAL_PROFILE_DEFAULT;
+		break;
+	case PLATFORM_PROFILE_COOL:
+		tp =  HP_THERMAL_PROFILE_COOL;
+		break;
+	default:
+		return -EOPNOTSUPP;
+	}
+
+	err = thermal_profile_set(tp);
+	if (err)
+		return err;
+
+	return 0;
+}
+
+static int thermal_profile_setup(void)
+{
+	int err, tp;
+
+	tp = thermal_profile_get();
 	if (tp < 0)
 		return tp;
 
@@ -881,11 +953,23 @@ static int thermal_profile_setup(struct platform_device *device)
 	 * call thermal profile write command to ensure that the firmware correctly
 	 * sets the OEM variables for the DPTF
 	 */
-	err = hp_wmi_perform_query(HPWMI_THERMAL_PROFILE_QUERY, HPWMI_WRITE, &tp,
-							   sizeof(tp), 0);
+	err = thermal_profile_set(tp);
 	if (err)
 		return err;
 
+	platform_profile_handler.profile_get = platform_profile_get,
+	platform_profile_handler.profile_set = platform_profile_set,
+
+	set_bit(PLATFORM_PROFILE_COOL, platform_profile_handler.choices);
+	set_bit(PLATFORM_PROFILE_BALANCED, platform_profile_handler.choices);
+	set_bit(PLATFORM_PROFILE_PERFORMANCE, platform_profile_handler.choices);
+
+	err = platform_profile_register(&platform_profile_handler);
+	if (err)
+		return err;
+
+	platform_profile_support = true;
+
 	return 0;
 }
 
@@ -900,7 +984,7 @@ static int __init hp_wmi_bios_setup(struct platform_device *device)
 	if (hp_wmi_rfkill_setup(device))
 		hp_wmi_rfkill2_setup(device);
 
-	thermal_profile_setup(device);
+	thermal_profile_setup();
 
 	return 0;
 }
@@ -927,6 +1011,9 @@ static int __exit hp_wmi_bios_remove(struct platform_device *device)
 		rfkill_destroy(wwan_rfkill);
 	}
 
+	if (platform_profile_support)
+		platform_profile_remove();
+
 	return 0;
 }
 
Signature · 1 line
2.29.2
Reviewed-by on v3 2/2
#4 lore raw

Hi,

Quoted 3 lines · Elia Devito

Implement support for cool, balanced and performance thermal profile

Thanks, patch looks good to me:

I will merge this once we are out of the merge-window / once 5.12-rc1 is out.

Regards,

Hans

Quoted 166 lines

---
the "quiet" profile will be implemented with a further patch

v2: added platform_profile_remove() missing call
v3: apply Barnabás suggestions

 drivers/platform/x86/hp-wmi.c | 97 +++++++++++++++++++++++++++++++++--
 1 file changed, 92 insertions(+), 5 deletions(-)
drivers/platform/x86/hp-wmi.c +92 -5
index 6d7b91b8109b..027a1467d009 100644
@@ -21,6 +21,7 @@
 #include <linux/input.h>
 #include <linux/input/sparse-keymap.h>
 #include <linux/platform_device.h>
+#include <linux/platform_profile.h>
 #include <linux/acpi.h>
 #include <linux/rfkill.h>
 #include <linux/string.h>
@@ -119,6 +120,12 @@ enum hp_wireless2_bits {
 	HPWMI_POWER_FW_OR_HW	= HPWMI_POWER_BIOS | HPWMI_POWER_HARD,
 };
 
+enum hp_thermal_profile {
+	HP_THERMAL_PROFILE_PERFORMANCE	= 0x00,
+	HP_THERMAL_PROFILE_DEFAULT		= 0x01,
+	HP_THERMAL_PROFILE_COOL			= 0x02
+};
+
 #define IS_HWBLOCKED(x) ((x & HPWMI_POWER_FW_OR_HW) != HPWMI_POWER_FW_OR_HW)
 #define IS_SWBLOCKED(x) !(x & HPWMI_POWER_SOFT)
 
@@ -159,6 +166,8 @@ static const struct key_entry hp_wmi_keymap[] = {
 
 static struct input_dev *hp_wmi_input_dev;
 static struct platform_device *hp_wmi_platform_dev;
+static struct platform_profile_handler platform_profile_handler;
+static bool platform_profile_support;
 
 static struct rfkill *wifi_rfkill;
 static struct rfkill *bluetooth_rfkill;
@@ -869,11 +878,74 @@ static int __init hp_wmi_rfkill2_setup(struct platform_device *device)
 	return err;
 }
 
-static int thermal_profile_setup(struct platform_device *device)
+static int thermal_profile_get(void)
+{
+	return hp_wmi_read_int(HPWMI_THERMAL_PROFILE_QUERY);
+}
+
+static int thermal_profile_set(int thermal_profile)
+{
+	return hp_wmi_perform_query(HPWMI_THERMAL_PROFILE_QUERY, HPWMI_WRITE, &thermal_profile,
+							   sizeof(thermal_profile), 0);
+}
+
+static int platform_profile_get(struct platform_profile_handler *pprof,
+				enum platform_profile_option *profile)
+{
+	int tp;
+
+	tp = thermal_profile_get();
+	if (tp < 0)
+		return tp;
+
+	switch (tp) {
+	case HP_THERMAL_PROFILE_PERFORMANCE:
+		*profile =  PLATFORM_PROFILE_PERFORMANCE;
+		break;
+	case HP_THERMAL_PROFILE_DEFAULT:
+		*profile =  PLATFORM_PROFILE_BALANCED;
+		break;
+	case HP_THERMAL_PROFILE_COOL:
+		*profile =  PLATFORM_PROFILE_COOL;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int platform_profile_set(struct platform_profile_handler *pprof,
+				enum platform_profile_option profile)
 {
 	int err, tp;
 
-	tp = hp_wmi_read_int(HPWMI_THERMAL_PROFILE_QUERY);
+	switch (profile) {
+	case PLATFORM_PROFILE_PERFORMANCE:
+		tp =  HP_THERMAL_PROFILE_PERFORMANCE;
+		break;
+	case PLATFORM_PROFILE_BALANCED:
+		tp =  HP_THERMAL_PROFILE_DEFAULT;
+		break;
+	case PLATFORM_PROFILE_COOL:
+		tp =  HP_THERMAL_PROFILE_COOL;
+		break;
+	default:
+		return -EOPNOTSUPP;
+	}
+
+	err = thermal_profile_set(tp);
+	if (err)
+		return err;
+
+	return 0;
+}
+
+static int thermal_profile_setup(void)
+{
+	int err, tp;
+
+	tp = thermal_profile_get();
 	if (tp < 0)
 		return tp;
 
@@ -881,11 +953,23 @@ static int thermal_profile_setup(struct platform_device *device)
 	 * call thermal profile write command to ensure that the firmware correctly
 	 * sets the OEM variables for the DPTF
 	 */
-	err = hp_wmi_perform_query(HPWMI_THERMAL_PROFILE_QUERY, HPWMI_WRITE, &tp,
-							   sizeof(tp), 0);
+	err = thermal_profile_set(tp);
 	if (err)
 		return err;
 
+	platform_profile_handler.profile_get = platform_profile_get,
+	platform_profile_handler.profile_set = platform_profile_set,
+
+	set_bit(PLATFORM_PROFILE_COOL, platform_profile_handler.choices);
+	set_bit(PLATFORM_PROFILE_BALANCED, platform_profile_handler.choices);
+	set_bit(PLATFORM_PROFILE_PERFORMANCE, platform_profile_handler.choices);
+
+	err = platform_profile_register(&platform_profile_handler);
+	if (err)
+		return err;
+
+	platform_profile_support = true;
+
 	return 0;
 }
 
@@ -900,7 +984,7 @@ static int __init hp_wmi_bios_setup(struct platform_device *device)
 	if (hp_wmi_rfkill_setup(device))
 		hp_wmi_rfkill2_setup(device);
 
-	thermal_profile_setup(device);
+	thermal_profile_setup();
 
 	return 0;
 }
@@ -927,6 +1011,9 @@ static int __exit hp_wmi_bios_remove(struct platform_device *device)
 		rfkill_destroy(wwan_rfkill);
 	}
 
+	if (platform_profile_support)
+		platform_profile_remove();
+
 	return 0;
 }
 
#5 lore raw
In reply to Elia Devito

Hi,

Quoted 8 lines · Elia Devito

Implement support for cool, balanced and performance thermal profile

---
the "quiet" profile will be implemented with a further patch

v2: added platform_profile_remove() missing call
v3: apply Barnabás suggestions

Thank you for your patch, I've applied this patch to my review-hans branch:
https://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86.git/log/?h=review-hans

Note it will show up in my review-hans branch once I've pushed my local branch there, which might take a while.

Once I've run some tests on this branch the patches there will be added to the platform-drivers-x86/for-next branch and eventually will be included in the pdx86 pull-request to Linus for the next merge-window.

Regards,

Hans

Quoted 161 lines
 drivers/platform/x86/hp-wmi.c | 97 +++++++++++++++++++++++++++++++++--
 1 file changed, 92 insertions(+), 5 deletions(-)
drivers/platform/x86/hp-wmi.c +92 -5
index 6d7b91b8109b..027a1467d009 100644
@@ -21,6 +21,7 @@
 #include <linux/input.h>
 #include <linux/input/sparse-keymap.h>
 #include <linux/platform_device.h>
+#include <linux/platform_profile.h>
 #include <linux/acpi.h>
 #include <linux/rfkill.h>
 #include <linux/string.h>
@@ -119,6 +120,12 @@ enum hp_wireless2_bits {
 	HPWMI_POWER_FW_OR_HW	= HPWMI_POWER_BIOS | HPWMI_POWER_HARD,
 };
 
+enum hp_thermal_profile {
+	HP_THERMAL_PROFILE_PERFORMANCE	= 0x00,
+	HP_THERMAL_PROFILE_DEFAULT		= 0x01,
+	HP_THERMAL_PROFILE_COOL			= 0x02
+};
+
 #define IS_HWBLOCKED(x) ((x & HPWMI_POWER_FW_OR_HW) != HPWMI_POWER_FW_OR_HW)
 #define IS_SWBLOCKED(x) !(x & HPWMI_POWER_SOFT)
 
@@ -159,6 +166,8 @@ static const struct key_entry hp_wmi_keymap[] = {
 
 static struct input_dev *hp_wmi_input_dev;
 static struct platform_device *hp_wmi_platform_dev;
+static struct platform_profile_handler platform_profile_handler;
+static bool platform_profile_support;
 
 static struct rfkill *wifi_rfkill;
 static struct rfkill *bluetooth_rfkill;
@@ -869,11 +878,74 @@ static int __init hp_wmi_rfkill2_setup(struct platform_device *device)
 	return err;
 }
 
-static int thermal_profile_setup(struct platform_device *device)
+static int thermal_profile_get(void)
+{
+	return hp_wmi_read_int(HPWMI_THERMAL_PROFILE_QUERY);
+}
+
+static int thermal_profile_set(int thermal_profile)
+{
+	return hp_wmi_perform_query(HPWMI_THERMAL_PROFILE_QUERY, HPWMI_WRITE, &thermal_profile,
+							   sizeof(thermal_profile), 0);
+}
+
+static int platform_profile_get(struct platform_profile_handler *pprof,
+				enum platform_profile_option *profile)
+{
+	int tp;
+
+	tp = thermal_profile_get();
+	if (tp < 0)
+		return tp;
+
+	switch (tp) {
+	case HP_THERMAL_PROFILE_PERFORMANCE:
+		*profile =  PLATFORM_PROFILE_PERFORMANCE;
+		break;
+	case HP_THERMAL_PROFILE_DEFAULT:
+		*profile =  PLATFORM_PROFILE_BALANCED;
+		break;
+	case HP_THERMAL_PROFILE_COOL:
+		*profile =  PLATFORM_PROFILE_COOL;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int platform_profile_set(struct platform_profile_handler *pprof,
+				enum platform_profile_option profile)
 {
 	int err, tp;
 
-	tp = hp_wmi_read_int(HPWMI_THERMAL_PROFILE_QUERY);
+	switch (profile) {
+	case PLATFORM_PROFILE_PERFORMANCE:
+		tp =  HP_THERMAL_PROFILE_PERFORMANCE;
+		break;
+	case PLATFORM_PROFILE_BALANCED:
+		tp =  HP_THERMAL_PROFILE_DEFAULT;
+		break;
+	case PLATFORM_PROFILE_COOL:
+		tp =  HP_THERMAL_PROFILE_COOL;
+		break;
+	default:
+		return -EOPNOTSUPP;
+	}
+
+	err = thermal_profile_set(tp);
+	if (err)
+		return err;
+
+	return 0;
+}
+
+static int thermal_profile_setup(void)
+{
+	int err, tp;
+
+	tp = thermal_profile_get();
 	if (tp < 0)
 		return tp;
 
@@ -881,11 +953,23 @@ static int thermal_profile_setup(struct platform_device *device)
 	 * call thermal profile write command to ensure that the firmware correctly
 	 * sets the OEM variables for the DPTF
 	 */
-	err = hp_wmi_perform_query(HPWMI_THERMAL_PROFILE_QUERY, HPWMI_WRITE, &tp,
-							   sizeof(tp), 0);
+	err = thermal_profile_set(tp);
 	if (err)
 		return err;
 
+	platform_profile_handler.profile_get = platform_profile_get,
+	platform_profile_handler.profile_set = platform_profile_set,
+
+	set_bit(PLATFORM_PROFILE_COOL, platform_profile_handler.choices);
+	set_bit(PLATFORM_PROFILE_BALANCED, platform_profile_handler.choices);
+	set_bit(PLATFORM_PROFILE_PERFORMANCE, platform_profile_handler.choices);
+
+	err = platform_profile_register(&platform_profile_handler);
+	if (err)
+		return err;
+
+	platform_profile_support = true;
+
 	return 0;
 }
 
@@ -900,7 +984,7 @@ static int __init hp_wmi_bios_setup(struct platform_device *device)
 	if (hp_wmi_rfkill_setup(device))
 		hp_wmi_rfkill2_setup(device);
 
-	thermal_profile_setup(device);
+	thermal_profile_setup();
 
 	return 0;
 }
@@ -927,6 +1011,9 @@ static int __exit hp_wmi_bios_remove(struct platform_device *device)
 		rfkill_destroy(wwan_rfkill);
 	}
 
+	if (platform_profile_support)
+		platform_profile_remove();
+
 	return 0;
 }