Skip to contentSkip to conversation

WMI and debugfs calls for TWT dialogs

PATCH Superseded Aloka Dixit 2 participants 9 messages Feb 22, 2021 – Mar 11, 2021 1 message not in the archive Qualcomm Atheros ATH11K wireless driver

v5 of 8 Superseded Latest is v8 →

lore
Share & tools
lore
#0 lore raw

v5 cover WMI and debugfs calls for TWT dialogs

This patchset adds support for TWT dialogs using debugfs. Individual patch files show changes in V5.

John Crispin (2):
ath11k: add WMI calls to manually add/del/pause/resume TWT dialogs
ath11k: add debugfs for TWT debug calls

 drivers/net/wireless/ath/ath11k/core.h  |   4 +
 drivers/net/wireless/ath/ath11k/debug.c | 224 ++++++++++++++++++++++++
 drivers/net/wireless/ath/ath11k/debug.h |  13 ++
 drivers/net/wireless/ath/ath11k/mac.c   |   3 +
 drivers/net/wireless/ath/ath11k/wmi.c   | 218 ++++++++++++++++++++++-
 drivers/net/wireless/ath/ath11k/wmi.h   | 114 ++++++++++++
 6 files changed, 572 insertions(+), 4 deletions(-)

base-commit: f5242d42da02730c67d517a7402015c13f59deee

Signature · 7 lines
2.25.0


-- 
ath11k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath11k
#1 lore raw

PATCH v5 1/2 ath11k: add WMI calls to manually add/del/pause/resume TWT dialogs

From: John Crispin <[email protected]>

These calls are used for debugging and will be required for WFA certification tests.

---
Changes in V5
* Setting and resetting of twt_enabled in WMI functions
* ath11k_dbg() instead of ath11k_info() in ath11k_wmi_twt_add_dialog_event()
* Made WMI error messages more readable

---
 drivers/net/wireless/ath/ath11k/core.h |   1 +
 drivers/net/wireless/ath/ath11k/wmi.c  | 218 ++++++++++++++++++++++++-
 drivers/net/wireless/ath/ath11k/wmi.h  | 114 +++++++++++++
 3 files changed, 329 insertions(+), 4 deletions(-)
drivers/net/wireless/ath/ath11k/core.h +1 -0
index 9cdc4f0b0690..a7d5333485aa 100644
@@ -564,6 +564,7 @@ struct ath11k {
 #endif
 	bool dfs_block_radar_events;
 	struct ath11k_thermal thermal;
+	u8 twt_enabled;
 };
 
 struct ath11k_band_cap {
drivers/net/wireless/ath/ath11k/wmi.c +214 -4

253 lines not on this page · raw message

drivers/net/wireless/ath/ath11k/wmi.h +114 -0

126 lines not on this page · raw message

Signature · 7 lines
2.25.0


-- 
ath11k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath11k
#2 lore raw

Re: [PATCH V5 1/2] ath11k: add WMI calls to manually add/del/pause/resume TWT dialogs

Quoted 7 lines · Aloka Dixit

These calls are used for debugging and will be required for WFA certification tests.

This patchset had new warnings:

drivers/net/wireless/ath/ath11k/debugfs.c:16:15: warning: symbol 'debugfs_ath11k' was not declared. Should it be static? drivers/net/wireless/ath/ath11k/wmi.c:7143: char * array declaration might be better as static const

Signature · 9 lines
https://patchwork.kernel.org/project/linux-wireless/patch/[email protected]/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches


-- 
ath11k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath11k
#3 lore raw

Re: [PATCH V5 1/2] ath11k: add WMI calls to manually add/del/pause/resume TWT dialogs

In reply to Aloka Dixit
Quoted 7 lines · Aloka Dixit

These calls are used for debugging and will be required for WFA certification tests.

This patchset had new warnings:

drivers/net/wireless/ath/ath11k/debugfs.c:16:15: warning: symbol 'debugfs_ath11k' was not declared. Should it be static? drivers/net/wireless/ath/ath11k/wmi.c:7143: char * array declaration might be better as static const

Signature · 3 lines
https://patchwork.kernel.org/project/linux-wireless/patch/[email protected]/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
#4 lore raw

Re: [PATCH V5 1/2] ath11k: add WMI calls to manually add/del/pause/resume TWT dialogs

In reply to Aloka Dixit
Quoted 8 lines · Aloka Dixit

From: John Crispin <[email protected]>

These calls are used for debugging and will be required for WFA certification tests.

[...]

Quoted 30 lines
drivers/net/wireless/ath/ath11k/wmi.c +30 -0
+int ath11k_wmi_send_twt_add_dialog_cmd(struct ath11k *ar,
+				       struct wmi_twt_add_dialog_params *params)
+{
+	struct ath11k_pdev_wmi *wmi = ar->wmi;
+	struct ath11k_base *ab = wmi->wmi_ab->ab;
+	struct wmi_twt_add_dialog_params_cmd *cmd;
+	struct sk_buff *skb;
+	int ret, len;
+
+	len = sizeof(*cmd);
+
+	skb = ath11k_wmi_alloc_skb(wmi->wmi_ab, len);
+	if (!skb)
+		return -ENOMEM;
+
+	cmd = (struct wmi_twt_add_dialog_params_cmd *)skb->data;
+	cmd->tlv_header = FIELD_PREP(WMI_TLV_TAG, WMI_TAG_TWT_ADD_DIALOG_CMD) |
+			  FIELD_PREP(WMI_TLV_LEN, len - TLV_HDR_SIZE);
+
+	cmd->vdev_id = params->vdev_id;
+	ether_addr_copy(cmd->peer_macaddr.addr, params->peer_macaddr);
+	cmd->dialog_id = params->dialog_id;
+	cmd->wake_intvl_us = params->wake_intvl_us;
+	cmd->wake_intvl_mantis = params->wake_intvl_mantis;
+	cmd->wake_dura_us = params->wake_dura_us;
+	cmd->sp_offset_us = params->sp_offset_us;
+	cmd->flags = params->twt_cmd;
+	if (params->flag_bcast)
+		cmd->flags |= WMI_TWT_ADD_DIALOG_FLAG_BCAST;
+	if (params->flag_trigger)

drivers/net/wireless/ath/ath11k/wmi.c ath11k_wmi_send_twt_disable_cmd(struct ath11k *ar, u32 pdev_id) · line 2979

Quoted 10 lines
drivers/net/wireless/ath/ath11k/wmi.c +10 -0
+		cmd->flags |= WMI_TWT_ADD_DIALOG_FLAG_TRIGGER;
+	if (params->flag_flow_type)
+		cmd->flags |= WMI_TWT_ADD_DIALOG_FLAG_FLOW_TYPE;
+	if (params->flag_protection)
+		cmd->flags |= WMI_TWT_ADD_DIALOG_FLAG_PROTECTION;
+
+	ath11k_dbg(ar->ab, ATH11K_DBG_WMI,
+		   "WMI add TWT dialog, vdev %u, dialog id %u,\n"
+		   "wake interval %u, mantissa %u, wake duration %u,\n"
+		   "service period offset %u, flags 0x%x\n",

In debug messages please use all lower case, and no commas nor \n (ie. all in one line).

drivers/net/wireless/ath/ath11k/wmi.c ath11k_wmi_send_twt_disable_cmd(struct ath11k *ar, u32 pdev_id) · line 2988

Quoted 5 lines
drivers/net/wireless/ath/ath11k/wmi.c +5 -0
+	ret = ath11k_wmi_cmd_send(wmi, skb, WMI_TWT_ADD_DIALOG_CMDID);
+
+	if (ret) {
+		ath11k_warn(ab,
+			    "Failed to send WMI command to add TWT dialog\n");

Warning and error messages should follow style:

"failed to send add TWT dialog WMI command: %d", ret

Quoted 19 lines
drivers/net/wireless/ath/ath11k/wmi.c +19 -0
+static void ath11k_wmi_twt_add_dialog_event(struct ath11k_base *ab,
+					    struct sk_buff *skb)
+{
+	const char *status[] = {
+		"OK", "TWT_NOT_ENABLED", "USED_DIALOG_ID", "INVALID_PARAM",
+		"NOT_READY", "NO_RESOURCE", "NO_ACK", "NO_RESPONSE",
+		"DENIED", "UNKNOWN_ERROR"
+	};
+	const void **tb;
+	const struct wmi_twt_add_dialog_event *ev;
+	int ret;
+
+	tb = ath11k_wmi_tlv_parse_alloc(ab, skb->data, skb->len, GFP_ATOMIC);
+	if (IS_ERR(tb)) {
+		ret = PTR_ERR(tb);
+		ath11k_warn(ab,
+			    "failed to parse TWT add dialog status event tlv: %d\n", ret);
+		return;
+	}

drivers/net/wireless/ath/ath11k/wmi.c static void ath11k_wmi_event_wow_wakeup_host(struct ath11k_base *ab, struct sk_b · line 7184

Quoted 10 lines
drivers/net/wireless/ath/ath11k/wmi.c +10 -0
+
+	ev = tb[WMI_TAG_TWT_ADD_DIALOG_COMPLETE_EVENT];
+	if (!ev) {
+		ath11k_warn(ab, "failed to fetch TWT add dialog event\n");
+		goto exit;
+	}
+
+	ath11k_dbg(ab, ATH11K_DBG_WMI,
+		   "TWT Add Dialog Event - vdev: %d, dialog id: %d, status: %s\n",
+		   ev->vdev_id, ev->dialog_id, status[ev->status]);

You are not checking that status array is not used out of bounds. I would just remove the string conversion to keep things simple, but if you want to print in strings please add a helper function to do the conversion and add status values as enum to wmi.h.

Signature · 8 lines
https://patchwork.kernel.org/project/linux-wireless/list/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches

-- 
ath11k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath11k

A message that is not in the archive (sent off-list or not yet received): [email protected]

#6 lore raw

Re: [PATCH V5 1/2] ath11k: add WMI calls to manually add/del/pause/resume TWT dialogs

Quoted 10 lines · Kalle Valo
Quoted 7 lines · Aloka Dixit

These calls are used for debugging and will be required for WFA certification tests.

Quoted 4 lines

This patchset had new warnings:

drivers/net/wireless/ath/ath11k/debugfs.c:16:15: warning: symbol 'debugfs_ath11k' was not declared. Should it be static?

This patch-set doesn't add any reference to 'debugfs_ath11k', so don't know why this warning came up.

Quoted 2 lines

drivers/net/wireless/ath/ath11k/wmi.c:7143: char * array declaration might be better as static const

Will remove this array as per your other comment regarding adding a helper function.

Signature · 3 lines
ath11k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath11k
#7 lore raw

Re: [PATCH V5 1/2] ath11k: add WMI calls to manually add/del/pause/resume TWT dialogs

Quoted 11 lines · Aloka Dixit
Quoted 10 lines · Kalle Valo
Quoted 7 lines · Aloka Dixit

These calls are used for debugging and will be required for WFA certification tests.

Quoted 7 lines
Quoted 4 lines

This patchset had new warnings:

drivers/net/wireless/ath/ath11k/debugfs.c:16:15: warning: symbol 'debugfs_ath11k' was not declared. Should it be static?

This patch-set doesn't add any reference to 'debugfs_ath11k', so don't know why this warning came up.

Ah, sorry. That's coming from Anil's debugfs patch.

Signature · 8 lines
https://patchwork.kernel.org/project/linux-wireless/list/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches

-- 
ath11k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath11k
#8 lore raw

PATCH v5 2/2 ath11k: add debugfs for TWT debug calls

In reply to Aloka Dixit

From: John Crispin <[email protected]>

New debugfs files to manually add/delete/pause/resume TWT dialogs for test/debug purposes.

The debugfs files expect the following parameters
(1) Add dialog
echo '<Peer_MAC> <Dialog_ID> <Wake_Interval_Usec> <Wake_Interval_Mantis> <Wake_Duration_Usec> <First_SP_Offset> <TWT_Command> <1:Broadcast / 0:Individual> <1:Triggered / 0:Untriggered> <1:Unannounced / 0:Announced> <1:Protected / 0:Unprotected>' > /sys/kernel/debug/ieee80211/phyX/netdev:wlanX/twt/add_dialog

Example (Non-triggered and un-announced):
echo '00:03:7F:20:13:52 1 102400 100 30720 20480 4 0 0 1 0' > /sys/kernel/debug/ieee80211/phy0/netdev:wlan0/twt/add_dialog

(2) Delete dialog
echo '<Peer_MAC> <Dialog_ID>' > /sys/kernel/debug/ieee80211/phyX/netdev:wlanX/twt/del_dialog

(3) Pause dialog
echo '<Peer_MAC> <Dialog_ID>' > /sys/kernel/debug/ieee80211/phyX/netdev:wlanX/twt/pause_dialog

(4) Resume dialog
echo '<Peer_MAC> <Dialog_ID> <SP_Offset_Usec> <Next_TWT_Size>' > /sys/kernel/debug/ieee80211/phyX/netdev:wlanX/twt/resume_dialog

Example:
echo '00:03:7F:20:13:52 1 2000000 3' > /sys/kernel/debug/ieee80211/phy0/netdev:wlan0/twt/resume_dialog

---
Changes in V5
* TWT directory created during ath11k_mac_op_add_interface() instead
* of during TWT enable command.
* File write operation check for twt_enabled.
* Used CONFIG_ATH11K_DEBUGFS instead of CONFIG_MAC80211_DEBUGFS.
* Example commands in commit description.

---
 drivers/net/wireless/ath/ath11k/core.h  |   3 +
 drivers/net/wireless/ath/ath11k/debug.c | 224 ++++++++++++++++++++++++
 drivers/net/wireless/ath/ath11k/debug.h |  13 ++
 drivers/net/wireless/ath/ath11k/mac.c   |   3 +
 4 files changed, 243 insertions(+)
drivers/net/wireless/ath/ath11k/core.h +3 -0
index a7d5333485aa..944a9f88ed17 100644
@@ -241,6 +241,9 @@ struct ath11k_vif {
 	bool rsnie_present;
 	bool wpaie_present;
 	struct ieee80211_chanctx_conf chanctx;
+#ifdef CONFIG_ATH11K_DEBUGFS
+	struct dentry *debugfs_twt;
+#endif /* CONFIG_ATH11K_DEBUGFS */
 };
 
 struct ath11k_vif_iter {
drivers/net/wireless/ath/ath11k/debug.c +224 -0

227 lines not on this page · raw message

drivers/net/wireless/ath/ath11k/debug.h +13 -0
index 659a275e2eb3..2b41cefb68b5 100644
@@ -64,4 +64,17 @@ do {								\
 		__ath11k_dbg(ar, dbg_mask, fmt, ##__VA_ARGS__);	\
 } while (0)
 
+#ifdef CONFIG_ATH11K_DEBUGFS
+void ath11k_debugfs_add_interface(struct ath11k_vif *arvif);
+void ath11k_debugfs_remove_interface(struct ath11k_vif *arvif);
+#else /* CONFIG_ATH11K_DEBUGFS */
+static inline void ath11k_debugfs_add_interface(struct ath11k_vif *arvif)
+{
+}
+
+static inline void ath11k_debugfs_remove_interface(struct ath11k_vif *arvif)
+{
+}
+#endif /* CONFIG_ATH11K_DEBUGFS */
+
 #endif /* _ATH11K_DEBUG_H_ */
drivers/net/wireless/ath/ath11k/mac.c +3 -0
index 335d49af7dd5..aa0f2b65d10c 100644
@@ -4766,6 +4766,7 @@ static int ath11k_mac_op_add_interface(struct ieee80211_hw *hw,
 	}
 
 	ath11k_dp_vdev_tx_attach(ar, arvif);
+	ath11k_debugfs_add_interface(arvif);
 
 	mutex_unlock(&ar->conf_mutex);
 
@@ -4885,6 +4886,8 @@ static void ath11k_mac_op_remove_interface(struct ieee80211_hw *hw,
 
 	/* TODO: recal traffic pause state based on the available vdevs */
 
+	ath11k_debugfs_remove_interface(arvif);
+
 	mutex_unlock(&ar->conf_mutex);
 }
 
Signature · 7 lines
2.25.0


-- 
ath11k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath11k
#9 lore raw

Re: [PATCH V5 2/2] ath11k: add debugfs for TWT debug calls

Quoted 36 lines · Aloka Dixit

From: John Crispin <[email protected]>

New debugfs files to manually add/delete/pause/resume TWT dialogs for test/debug purposes.

The debugfs files expect the following parameters
(1) Add dialog
echo '<Peer_MAC> <Dialog_ID> <Wake_Interval_Usec> <Wake_Interval_Mantis> <Wake_Duration_Usec> <First_SP_Offset> <TWT_Command> <1:Broadcast / 0:Individual> <1:Triggered / 0:Untriggered> <1:Unannounced / 0:Announced> <1:Protected / 0:Unprotected>' > /sys/kernel/debug/ieee80211/phyX/netdev:wlanX/twt/add_dialog

Example (Non-triggered and un-announced):
echo '00:03:7F:20:13:52 1 102400 100 30720 20480 4 0 0 1 0' > /sys/kernel/debug/ieee80211/phy0/netdev:wlan0/twt/add_dialog

(2) Delete dialog
echo '<Peer_MAC> <Dialog_ID>' > /sys/kernel/debug/ieee80211/phyX/netdev:wlanX/twt/del_dialog

(3) Pause dialog
echo '<Peer_MAC> <Dialog_ID>' > /sys/kernel/debug/ieee80211/phyX/netdev:wlanX/twt/pause_dialog

(4) Resume dialog
echo '<Peer_MAC> <Dialog_ID> <SP_Offset_Usec> <Next_TWT_Size>' > /sys/kernel/debug/ieee80211/phyX/netdev:wlanX/twt/resume_dialog

Example:
echo '00:03:7F:20:13:52 1 2000000 3' > /sys/kernel/debug/ieee80211/phy0/netdev:wlan0/twt/resume_dialog

[...]

Quoted 220 lines
drivers/net/wireless/ath/ath11k/debug.c +214 -0
@@ -104,3 +104,227 @@ void ath11k_dbg_dump(struct ath11k_base *ab,
 EXPORT_SYMBOL(ath11k_dbg_dump);
 
 #endif /* CONFIG_ATH11K_DEBUG */
+
+#ifdef CONFIG_ATH11K_DEBUGFS
+static ssize_t ath11k_write_twt_add_dialog(struct file *file,
+					   const char __user *ubuf,
+					   size_t count, loff_t *ppos)
+{
+	struct ath11k_vif *arvif = file->private_data;
+	struct wmi_twt_add_dialog_params params = { 0 };
+	u8 buf[128] = {0};
+	int ret;
+
+	if (arvif->ar->twt_enabled == 0) {
+		ath11k_err(arvif->ar->ab, "TWT support is not enabled\n");
+		return -EOPNOTSUPP;
+	}
+
+	ret = simple_write_to_buffer(buf, sizeof(buf) - 1, ppos, ubuf, count);
+	if (ret < 0)
+		return ret;
+
+	buf[ret] = '\0';
+	ret = sscanf(buf,
+		     "%02hhx:%02hhx:%02hhx:%02hhx:%02hhx:%02hhx %u %u %u %u %u %hhu %hhu %hhu %hhu %hhu",
+		     &params.peer_macaddr[0],
+		     &params.peer_macaddr[1],
+		     &params.peer_macaddr[2],
+		     &params.peer_macaddr[3],
+		     &params.peer_macaddr[4],
+		     &params.peer_macaddr[5],
+		     &params.dialog_id,
+		     &params.wake_intvl_us,
+		     &params.wake_intvl_mantis,
+		     &params.wake_dura_us,
+		     &params.sp_offset_us,
+		     &params.twt_cmd,
+		     &params.flag_bcast,
+		     &params.flag_trigger,
+		     &params.flag_flow_type,
+		     &params.flag_protection);
+	if (ret != 16)
+		return -EINVAL;
+
+	params.vdev_id = arvif->vdev_id;
+
+	ret = ath11k_wmi_send_twt_add_dialog_cmd(arvif->ar, &params);
+	if (ret)
+		return ret;
+
+	return count;
+}
+
+static ssize_t ath11k_write_twt_del_dialog(struct file *file,
+					   const char __user *ubuf,
+					   size_t count, loff_t *ppos)
+{
+	struct ath11k_vif *arvif = file->private_data;
+	struct wmi_twt_del_dialog_params params = { 0 };
+	u8 buf[64] = {0};
+	int ret;
+
+	if (arvif->ar->twt_enabled == 0) {
+		ath11k_err(arvif->ar->ab, "TWT support is not enabled\n");
+		return -EOPNOTSUPP;
+	}
+
+	ret = simple_write_to_buffer(buf, sizeof(buf) - 1, ppos, ubuf, count);
+	if (ret < 0)
+		return ret;
+
+	buf[ret] = '\0';
+	ret = sscanf(buf, "%02hhx:%02hhx:%02hhx:%02hhx:%02hhx:%02hhx %u",
+		     &params.peer_macaddr[0],
+		     &params.peer_macaddr[1],
+		     &params.peer_macaddr[2],
+		     &params.peer_macaddr[3],
+		     &params.peer_macaddr[4],
+		     &params.peer_macaddr[5],
+		     &params.dialog_id);
+	if (ret != 7)
+		return -EINVAL;
+
+	params.vdev_id = arvif->vdev_id;
+
+	ret = ath11k_wmi_send_twt_del_dialog_cmd(arvif->ar, &params);
+	if (ret)
+		return ret;
+
+	return count;
+}
+
+static ssize_t ath11k_write_twt_pause_dialog(struct file *file,
+					     const char __user *ubuf,
+					     size_t count, loff_t *ppos)
+{
+	struct ath11k_vif *arvif = file->private_data;
+	struct wmi_twt_pause_dialog_params params = { 0 };
+	u8 buf[64] = {0};
+	int ret;
+
+	if (arvif->ar->twt_enabled == 0) {
+		ath11k_err(arvif->ar->ab, "TWT support is not enabled\n");
+		return -EOPNOTSUPP;
+	}
+
+	ret = simple_write_to_buffer(buf, sizeof(buf) - 1, ppos, ubuf, count);
+	if (ret < 0)
+		return ret;
+
+	buf[ret] = '\0';
+	ret = sscanf(buf, "%02hhx:%02hhx:%02hhx:%02hhx:%02hhx:%02hhx %u",
+		     &params.peer_macaddr[0],
+		     &params.peer_macaddr[1],
+		     &params.peer_macaddr[2],
+		     &params.peer_macaddr[3],
+		     &params.peer_macaddr[4],
+		     &params.peer_macaddr[5],
+		     &params.dialog_id);
+	if (ret != 7)
+		return -EINVAL;
+
+	params.vdev_id = arvif->vdev_id;
+
+	ret = ath11k_wmi_send_twt_pause_dialog_cmd(arvif->ar, &params);
+	if (ret)
+		return ret;
+
+	return count;
+}
+
+static ssize_t ath11k_write_twt_resume_dialog(struct file *file,
+					      const char __user *ubuf,
+					      size_t count, loff_t *ppos)
+{
+	struct ath11k_vif *arvif = file->private_data;
+	struct wmi_twt_resume_dialog_params params = { 0 };
+	u8 buf[64] = {0};
+	int ret;
+
+	if (arvif->ar->twt_enabled == 0) {
+		ath11k_err(arvif->ar->ab, "TWT support is not enabled\n");
+		return -EOPNOTSUPP;
+	}
+
+	ret = simple_write_to_buffer(buf, sizeof(buf) - 1, ppos, ubuf, count);
+	if (ret < 0)
+		return ret;
+
+	buf[ret] = '\0';
+	ret = sscanf(buf, "%02hhx:%02hhx:%02hhx:%02hhx:%02hhx:%02hhx %u %u %u",
+		     &params.peer_macaddr[0],
+		     &params.peer_macaddr[1],
+		     &params.peer_macaddr[2],
+		     &params.peer_macaddr[3],
+		     &params.peer_macaddr[4],
+		     &params.peer_macaddr[5],
+		     &params.dialog_id,
+		     &params.sp_offset_us,
+		     &params.next_twt_size);
+	if (ret != 9)
+		return -EINVAL;
+
+	params.vdev_id = arvif->vdev_id;
+
+	ret = ath11k_wmi_send_twt_resume_dialog_cmd(arvif->ar, &params);
+	if (ret)
+		return ret;
+
+	return count;
+}
+
+static const struct file_operations ath11k_fops_twt_add_dialog = {
+	.write = ath11k_write_twt_add_dialog,
+	.open = simple_open
+};
+
+static const struct file_operations ath11k_fops_twt_del_dialog = {
+	.write = ath11k_write_twt_del_dialog,
+	.open = simple_open
+};
+
+static const struct file_operations ath11k_fops_twt_pause_dialog = {
+	.write = ath11k_write_twt_pause_dialog,
+	.open = simple_open
+};
+
+static const struct file_operations ath11k_fops_twt_resume_dialog = {
+	.write = ath11k_write_twt_resume_dialog,
+	.open = simple_open
+};
+
+void ath11k_debugfs_add_interface(struct ath11k_vif *arvif)
+{
+	if (arvif->vif->type == NL80211_IFTYPE_AP && !arvif->debugfs_twt) {
+		arvif->debugfs_twt = debugfs_create_dir("twt",
+							arvif->vif->debugfs_dir);
+		if (IS_ERR_OR_NULL(arvif->debugfs_twt)) {
+			ath11k_warn(arvif->ar->ab,
+				    "failed to create twt debugfs: %p\n",
+				    arvif->debugfs_twt);
+			arvif->debugfs_twt = NULL;
+			return;
+		}
+
+		debugfs_create_file("add_dialog", 0200, arvif->debugfs_twt,
+				    arvif, &ath11k_fops_twt_add_dialog);
+
+		debugfs_create_file("del_dialog", 0200, arvif->debugfs_twt,
+				    arvif, &ath11k_fops_twt_del_dialog);
+
+		debugfs_create_file("pause_dialog", 0200, arvif->debugfs_twt,
+				    arvif, &ath11k_fops_twt_pause_dialog);
+
+		debugfs_create_file("resume_dialog", 0200, arvif->debugfs_twt,
+				    arvif, &ath11k_fops_twt_resume_dialog);

drivers/net/wireless/ath/ath11k/debug.c void ath11k_dbg_dump(struct ath11k_base *ab, · line 330

Quoted 10 lines
drivers/net/wireless/ath/ath11k/debug.c +10 -0
+	}
+}
+
+void ath11k_debugfs_remove_interface(struct ath11k_vif *arvif)
+{
+	debugfs_remove_recursive(arvif->debugfs_twt);
+	arvif->debugfs_twt = NULL;
+}
+
+#endif /* CONFIG_ATH11K_DEBUGFS */

Shouldn't these functions be in debugfs.c?

Quoted 10 lines
drivers/net/wireless/ath/ath11k/debug.h +2 -0
index 659a275e2eb3..2b41cefb68b5 100644
@@ -64,4 +64,17 @@ do {								\
 		__ath11k_dbg(ar, dbg_mask, fmt, ##__VA_ARGS__);	\
 } while (0)
 
+#ifdef CONFIG_ATH11K_DEBUGFS
+void ath11k_debugfs_add_interface(struct ath11k_vif *arvif);

drivers/net/wireless/ath/ath11k/debug.h do { \ · line 78

Quoted 10 lines
drivers/net/wireless/ath/ath11k/debug.h +10 -0
+void ath11k_debugfs_remove_interface(struct ath11k_vif *arvif);
+#else /* CONFIG_ATH11K_DEBUGFS */
+static inline void ath11k_debugfs_add_interface(struct ath11k_vif *arvif)
+{
+}
+
+static inline void ath11k_debugfs_remove_interface(struct ath11k_vif *arvif)
+{
+}
+#endif /* CONFIG_ATH11K_DEBUGFS */

And these in debugfs.h?

Signature · 8 lines
https://patchwork.kernel.org/project/linux-wireless/list/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches

-- 
ath11k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath11k