Replace video_uc_platdata with video_uc_plat
PATCH 1/1 Replace video_uc_platdata with video_uc_plat
The video_uc_platdata structure no longer exists. It has been renamed video_uc_plat.
Signed-off-by Dario Binacchi <[email protected]>
---
drivers/video/Kconfig | 4 ++-- drivers/video/nexell_display.c | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-)
drivers/video/Kconfig +2 -2
@@ -30,7 +30,7 @@ config VIDEO_PCI_DEFAULT_FB_SIZE help Generally, video drivers request the amount of memory they need for the frame buffer when they are bound, by setting the size field in - struct video_uc_platdata. That memory is then reserved for use after + struct video_uc_plat. That memory is then reserved for use after relocation. But PCI drivers cannot be bound before relocation unless they are mentioned in the devicetree.
@@ -51,7 +51,7 @@ config VIDEO_COPY U-Boot) and then copied to the hardware frame-buffer as needed. To use this, your video driver must set @copy_base in - struct video_uc_platdata. + struct video_uc_plat. config BACKLIGHT_PWM bool "Generic PWM based Backlight Driver"
drivers/video/nexell_display.c +1 -1
@@ -15,7 +15,7 @@#include <malloc.h> #include <linux/compat.h> #include <linux/err.h> -#include <video.h> /* For struct video_uc_platdata */ +#include <video.h> /* For struct video_uc_plat */ #include <video_fb.h> #include <lcd.h> #include <asm/global_data.h>
Signature · 1 line
2.17.1
PATCH 1/1 Replace video_uc_platdata with video_uc_plat
Quoted 9 lines · On Sat, 23 Jan 2021 19:43:52 +0100 Dario Binacchi dariobin at libero.it wrote:
The
video_uc_platdatastructure no longer exists. It has been renamedvideo_uc_plat.Signed-off-by Dario Binacchi <[email protected]>---
drivers/video/Kconfig | 4 ++-- drivers/video/nexell_display.c | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-)
Applied to u-boot-video/master, thanks!
--
Anatolij