ARM: ftrace: pause/unpause function graph tracer in cpu_suspend()
PATCH 1/1 ARM: ftrace: pause/unpause function graph tracer in cpu_suspend()
From: "louis.wang1" <[email protected]>
Enabling function_graph tracer on ARM causes kernel panic, because the function graph tracer updates the "return address" of a function in order to insert a trace callback on function exit, it saves the function's original return address in a return trace stack, but cpu_suspend() may not return through the normal return path.
cpu_suspend() will resume directly via the cpu_resume path, but the return trace stack has been set-up by the subfunctions of cpu_suspend(), which makes the "return address" inconsistent with cpu_suspend().
This patch refers to Commit de818bd4522c40ea02a81b387d2fa86f989c9623 ("arm64: kernel: pause/unpause function graph tracer in cpu_suspend()"), fixes the issue by pausing/resuming the function graph tracer on the thread executing cpu_suspend(), so that the function graph tracer state is kept consistent across functions that enter power down states and never return by effectively disabling graph tracer while they are executing.
--- arch/arm/kernel/suspend.c | 19 ++++++++++++++++++- 1 file changed, 18 insertions(+), 1 deletion(-)
arch/arm/kernel/suspend.c +18 -1
@@ -1,4 +1,5 @@// SPDX-License-Identifier: GPL-2.0 +#include <linux/ftrace.h> #include <linux/init.h> #include <linux/slab.h> #include <linux/mm_types.h>
@@ -26,12 +27,22 @@ int cpu_suspend(unsigned long arg, int (*fn)(unsigned long))return -EINVAL ;/* +* Function graph tracer state gets incosistent when the kernel +* calls functions that never return (aka suspend finishers) hence +* disable graph tracing during their execution. +*/ +pause_graph_tracing (); + +/* * Provide a temporary page table with an identity mapping for * the MMU-enable code, required for resuming. On successful * resume (indicated by a zero return code), we need to switch * back to the correct page tables. */ ret =__cpu_suspend (arg, fn, __mpidr); + +unpause_graph_tracing (); +if (ret ==0 ) {cpu_switch_mm (mm->pgd, mm);local_flush_bp_all ();
@@ -45,7 +56,13 @@ int cpu_suspend(unsigned long arg, int (*fn)(unsigned long))int cpu_suspend (unsigned long arg,int (*fn)(unsigned long )) {u32 __mpidr =cpu_logical_map (smp_processor_id ()); -return __cpu_suspend (arg, fn, __mpidr); +int ret; + +pause_graph_tracing (); + ret =__cpu_suspend (arg, fn, __mpidr); +unpause_graph_tracing (); + +return ret; }#define idmap_pgd NULL#endif
Signature · 1 line
2.7.4
RFC PATCH 1/1 ARM: ftrace: pause/unpause function graph tracer in cpu_suspend()
Hi,all
Quoted 74 lines · Louis Wang
From: "louis.wang1" <[email protected]>
Enabling
function_graphtracer on ARM causes kernel panic, because the function graph tracer updates the "return address" of a function in order to insert a trace callback on function exit, it saves the function's original return address in a return trace stack, butcpu_suspend()may not return through the normal return path.
cpu_suspend()will resume directly via thecpu_resumepath, but the return trace stack has been set-up by the subfunctions ofcpu_suspend(), which makes the "return address" inconsistent withcpu_suspend().This patch refers to Commit
de818bd4522c40ea02a81b387d2fa86f989c9623("arm64: kernel: pause/unpause function graph tracer incpu_suspend()"), fixes the issue by pausing/resuming the function graph tracer on the thread executingcpu_suspend(), so that the function graph tracer state is kept consistent across functions that enter power down states and never return by effectively disabling graph tracer while they are executing.Signed-off-by louis.wang1 <[email protected]>--- arch/arm/kernel/suspend.c | 19 ++++++++++++++++++- 1 file changed, 18 insertions(+), 1 deletion(-)arch/arm/kernel/suspend.c +18
-2@@ -1,4 +1,5 @@// SPDX-License-Identifier: GPL-2.0 +#include <linux/ftrace.h> #include <linux/init.h> #include <linux/slab.h> #include <linux/mm_types.h> @@ -26,12 +27,22 @@ int cpu_suspend(unsigned long arg, int (*fn)(unsigned long))return -EINVAL ;/* +* Function graph tracer state gets incosistent when the kernel +* calls functions that never return (aka suspend finishers) hence +* disable graph tracing during their execution. +*/ +pause_graph_tracing (); + +/* * Provide a temporary page table with an identity mapping for * the MMU-enable code, required for resuming. On successful * resume (indicated by a zero return code), we need to switch * back to the correct page tables. */ ret =__cpu_suspend (arg, fn, __mpidr); + +unpause_graph_tracing (); +if (ret ==0 ) {cpu_switch_mm (mm->pgd, mm);local_flush_bp_all ();@@ -45,7 +56,13 @@ int cpu_suspend(unsigned long arg, int (*fn)(unsigned long))int cpu_suspend (unsigned long arg,int (*fn)(unsigned long )) {u32 __mpidr =cpu_logical_map (smp_processor_id ()); -return __cpu_suspend (arg, fn, __mpidr); +int ret; + +pause_graph_tracing (); + ret =__cpu_suspend (arg, fn, __mpidr); +unpause_graph_tracing (); + +return ret; }#define idmap_pgd NULL#endif --
Quoted 2 lines
2.7.4
ftrace function_graph tracer always cause kernel panic on my ARM device with multiple CPUs, I found a solution for the problem on ARM64, refers to the patch above,
I was wondering why this bugfix on ARM64 hasn't been upstreamed to ARM, Does anyone have a similar problem and can share information with me? Thanks.
Russell King - ARM Linux admin
maintainerQuoted 6 lines · liang wang
Hi,all
ftrace
function_graphtracer always cause kernel panic on my ARM device with multiple CPUs, I found a solution for the problem on ARM64, refers to the patch above,
I was wondering why this bugfix on ARM64 hasn't been upstreamed to ARM,
Patches get applied to the ARM tree after they've been submitted to the patch system. If they don't get submitted to the patch system, then they get buried and forgotten.
Signature · 2 lines
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/ FTTP is here! 40Mbps down 10Mbps up. Decent connectivity at last!
Hi Russell,
Quoted 9 lines · Russell King - ARM Linux admin
Quoted 6 lines · liang wang
Hi,all
ftrace
function_graphtracer always cause kernel panic on my ARM device with multiple CPUs, I found a solution for the problem on ARM64, refers to the patch above,
I was wondering why this bugfix on ARM64 hasn't been upstreamed to ARM,
Quoted 7 lines
Patches get applied to the ARM tree after they've been submitted to the patch system. If they don't get submitted to the patch system, then they get buried and forgotten.
--
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 40Mbps down 10Mbps up. Decent connectivity at last!
Thanks for replying,
So I refers to the solution on ARM64 and sent my patch on January as below.
http://lists.infradead.org/pipermail/linux-arm-kernel/2021-January/628460.html
But I haven't got any replies on my patch. How can I get my patch reviewed and submitted to the patch system?Should I resend a new patch to this maillist? Thanks!
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Russell King - ARM Linux admin
maintainerQuoted 21 lines · liang wang
Hi Russell,
Quoted 9 lines · Russell King - ARM Linux admin
Quoted 6 lines · liang wang
Hi,all
ftrace
function_graphtracer always cause kernel panic on my ARM device with multiple CPUs, I found a solution for the problem on ARM64, refers to the patch above,
I was wondering why this bugfix on ARM64 hasn't been upstreamed to ARM,Quoted 7 lines
Patches get applied to the ARM tree after they've been submitted to the patch system. If they don't get submitted to the patch system, then they get buried and forgotten.
--
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 40Mbps down 10Mbps up. Decent connectivity at last!
Quoted 7 lines
Thanks for replying,
So I refers to the solution on ARM64 and sent my patch on January as below.http://lists.infradead.org/pipermail/linux-arm-kernel/2021-January/628460.html
But I haven't got any replies on my patch. How can I get my patch reviewed and submitted to the patch system?
I don't use ftrace, so I'm not the right person to review it - but it seems that lots of patches for ARM are left to me to try and review, despite me not knowing sufficient to know whether it's correct or not. This isn't sustainable.
Quoted 1 line
Should I resend a new patch to this maillist?
You can try but I suspect the same thing will happen. The only thing I can think is if you put it in the patch system and I apply it, if someone has a problem with it, they'll shout about it soon enough. Not the best way, but I don't see much other option.
Signature · 2 lines
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/ FTTP is here! 40Mbps down 10Mbps up. Decent connectivity at last!
RFC PATCH 1/1 ARM: ftrace: pause/unpause function graph tracer in cpu_suspend()
Hi Russell
Quoted 38 lines · Russell King - ARM Linux admin
Quoted 21 lines · liang wang
Hi Russell,
Quoted 9 lines · Russell King - ARM Linux admin
Quoted 6 lines · liang wang
Hi,all
ftrace
function_graphtracer always cause kernel panic on my ARM device with multiple CPUs, I found a solution for the problem on ARM64, refers to the patch above,
I was wondering why this bugfix on ARM64 hasn't been upstreamed to ARM,Quoted 7 lines
Patches get applied to the ARM tree after they've been submitted to the patch system. If they don't get submitted to the patch system, then they get buried and forgotten.
--
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 40Mbps down 10Mbps up. Decent connectivity at last!Quoted 7 lines
Thanks for replying,
So I refers to the solution on ARM64 and sent my patch on January as below.http://lists.infradead.org/pipermail/linux-arm-kernel/2021-January/628460.html
But I haven't got any replies on my patch. How can I get my patch reviewed and submitted to the patch system?
I don't use ftrace, so I'm not the right person to review it - but it seems that lots of patches for ARM are left to me to try and review, despite me not knowing sufficient to know whether it's correct or not. This isn't sustainable.
Quoted 1 line
Should I resend a new patch to this maillist?
Quoted 8 lines
You can try but I suspect the same thing will happen. The only thing I can think is if you put it in the patch system and I apply it, if someone has a problem with it, they'll shout about it soon enough. Not the best way, but I don't see much other option.
--
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 40Mbps down 10Mbps up. Decent connectivity at last!
Thanks for answering my question.
I will upload it to the patch system as needed, and see whether there is a problem
or someone to discuss with.