docs: misc cleanup
cover docs: misc cleanup
Just a couple of documentation fixes that I noticed in passing today. Nothing too controversial.
This branch is based on 'maint'.
Denton Liu (3):
i18n.txt: camel case and monospace "i18n.commitEncoding" git-cat-file.txt: monospace args and placeholders git-cat-file.txt: remove references to "sha1"
Documentation/git-cat-file.txt | 52 +++++++++++++++++----------------- Documentation/i18n.txt | 2 +- 2 files changed, 27 insertions(+), 27 deletions(-)
Signature · 1 line
2.30.0.478.g8a0d178c01
PATCH 1/3 i18n.txt: camel case and monospace "i18n.commitEncoding"
In 95791be750 (doc: camelCase the i18n config variables to improve readability, 2017-07-17), the other i18n config variables were camel cased. However, this one instance was missed.
Camel case and monospace "i18n.commitEncoding" so that it matches the surrounding text.
--- Documentation/i18n.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
Documentation/i18n.txt +1 -1
@@ -38,7 +38,7 @@ mind. a warning if the commit log message given to it does not look like a valid UTF-8 string, unless you explicitly say your project uses a legacy encoding. The way to say this is to - have i18n.commitencoding in `.git/config` file, like this: + have `i18n.commitEncoding` in `.git/config` file, like this: + ------------ [i18n]
Signature · 1 line
2.30.0.478.g8a0d178c01
Re: [PATCH 1/3] i18n.txt: camel case and monospace "i18n.commitEncoding"
Quoted 11 lines · Denton Liu
In
95791be750(doc: camelCase the i18n config variables to improve readability, 2017-07-17), the other i18n config variables were camel cased. However, this one instance was missed.Camel case and monospace "i18n.commitEncoding" so that it matches the surrounding text.
Signed-off-by Denton Liu <[email protected]>--- Documentation/i18n.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
Looking good.
Documentation/i18n.txt mind. · line 44
Quoted 13 lines
Documentation/i18n.txt +1
-1@@ -38,7 +38,7 @@ mind. a warning if the commit log message given to it does not look like a valid UTF-8 string, unless you explicitly say your project uses a legacy encoding. The way to say this is to - have i18n.commitencoding in `.git/config` file, like this: + have `i18n.commitEncoding` in `.git/config` file, like this: + ------------ [i18n]
Thanks, but whenever you noticed an issue like "Ah, here we used an incorrect spelling i18n.commitencoding", please make it a habit to see if we did exactly the same mistake elsewhere (you have been working with Git long enough to know how cheap such a check is):
$ git grep -F -e i18n.commitencoding -- \
Documentation/ ':!Documentation/RelNotes/'and you would have found three other instances.
This obviously does not have to be part of this miniseries, but I wonder if we should have a list of all the configuration variables in one place that we can use to record the canonical spelling of these variables. As
$ git grep -h -E -i \ -e '^[a-z][-a-z0-9]*\.[a-z][-a-z0-9]*::' \ -e '^[a-z][-a-z0-9]*\.(\*|<?[a-z][-a-z0-9]*>?)\.(\*|<?[a-z][-a-z0-9]*>?)::' \ Documentation/config
gives many hits with camelCased names, it might be a good place to start.
Pretending that the above gives a good "canonical list" (it does not yet, if you look at the hits), I got curious how far we can go.
Massaging the output from the above into config-variables.lst
$ ... above command ... | sed -e 's/::$//' | sort -u >config-variables.lst
and then to extract use of these tokens in the main part of the documentation like this:
$ git grep -h -o -i -F -f config-variables.lst -- \ Documentation/ ':!Documentation/RelNotes/' | sort -u >config-usage.lst
gives us something we can compare with the "canonical" usage list.
$ comm -3 config-usage.lst config-variables.lst blame.blankboundary core.excludesfile core.filemode core.gitproxy core.ignorestat core.logallrefupdates core.repositoryformatversion core.trustCtime http.sslverify http.sslversion i18n.commitencoding push.pushoption remote.<name>.partialCloneFilter remote.pushdefault repack.UseDeltaBaseOffset sendemail.aliasesfile showbranch.default transfer.hiderefs uploadArchive.allowUnreachable
Some of them may be false hits, some may be showing that the copy in Documentation/config/ are spelled in all lowercase, but the majority of the hits above seem to be genuine errors similar to what you fixed in your patch.
Thanks.
PATCH v2 1/1 i18n.txt: camel case and monospace "i18n.commitEncoding"
In reply to Denton LiuIn 95791be750 (doc: camelCase the i18n config variables to improve readability, 2017-07-17), the other i18n config variables were camel cased. However, this one instance was missed.
Camel case and monospace "i18n.commitEncoding" so that it matches the surrounding text.
---
* So, while I still remember, I amended your commit and queued this.
Documentation/git-am.txt | 2 +- Documentation/git-mailinfo.txt | 4 ++-- Documentation/i18n.txt | 2 +- 3 files changed, 4 insertions(+), 4 deletions(-)
Documentation/git-am.txt +1 -1
@@ -79,7 +79,7 @@ OPTIONS Pass `-u` flag to 'git mailinfo' (see linkgit:git-mailinfo[1]). The proposed commit log message taken from the e-mail is re-coded into UTF-8 encoding (configuration variable - `i18n.commitencoding` can be used to specify project's + `i18n.commitEncoding` can be used to specify project's preferred encoding if it is not UTF-8). + This was optional in prior versions of git, but now it is the
Documentation/git-mailinfo.txt +2 -2
@@ -53,7 +53,7 @@ character. The commit log message, author name and author email are taken from the e-mail, and after minimally decoding MIME transfer encoding, re-coded in the charset specified by - i18n.commitencoding (defaulting to UTF-8) by transliterating + `i18n.commitEncoding` (defaulting to UTF-8) by transliterating them. This used to be optional but now it is the default. + Note that the patch is always used as-is without charset
@@ -61,7 +61,7 @@ conversion, even with this flag. --encoding=<encoding>:: Similar to -u. But when re-coding, the charset specified here is - used instead of the one specified by i18n.commitencoding or UTF-8. + used instead of the one specified by `i18n.commitEncoding` or UTF-8. -n:: Disable all charset re-coding of the metadata.
Documentation/i18n.txt +1 -1
@@ -38,7 +38,7 @@ mind. a warning if the commit log message given to it does not look like a valid UTF-8 string, unless you explicitly say your project uses a legacy encoding. The way to say this is to - have i18n.commitencoding in `.git/config` file, like this: + have `i18n.commitEncoding` in `.git/config` file, like this: + ------------ [i18n]
Signature · 1 line
2.30.1-808-g8fd60da8ea
Re: [PATCH v2] i18n.txt: camel case and monospace "i18n.commitEncoding"
Quoted 7 lines · Junio C Hamano
In
95791be750(doc: camelCase the i18n config variables to improve readability, 2017-07-17), the other i18n config variables were camel cased. However, this one instance was missed.Camel case and monospace "i18n.commitEncoding" so that it matches the surrounding text.
Quoted 6 lines
Signed-off-by Denton Liu <[email protected]>[jc: fixed 3 other mistakes that are exactly the same]Signed-off-by Junio C Hamano <[email protected]>---
* So, while I still remember, I amended your commit and queued this.
Denton's authorship seems to have been lost (no From: header). Was that intentional?
Re: [PATCH v2] i18n.txt: camel case and monospace "i18n.commitEncoding"
Quoted 15 lines · Eric Sunshine
Quoted 7 lines · Junio C Hamano
In
95791be750(doc: camelCase the i18n config variables to improve readability, 2017-07-17), the other i18n config variables were camel cased. However, this one instance was missed.Camel case and monospace "i18n.commitEncoding" so that it matches the surrounding text.
Quoted 6 lines
Signed-off-by Denton Liu <[email protected]>[jc: fixed 3 other mistakes that are exactly the same]Signed-off-by Junio C Hamano <[email protected]>---
* So, while I still remember, I amended your commit and queued this.
Quoted 2 lines
Denton's authorship seems to have been lost (no From: header). Was that intentional?
I didn't even notice.
I actually expect that Denton will produce a more complete series based on the "comm -3" output, so that this patch itself (or its authorship) won't matter ;-)
And I also expect that somebody will take the "two greps and comm" trick I showed and wrap it into some form of doc-lint. Hint, hint...
Thanks.
v3 cover doc: spell configuration variable names in camelCase
I said in the first review on Denton's patch
This obviously does not have to be part of this miniseries, but I wonder if we should have a list of all the configuration variables in one place that we can use to record the canonical spelling of these variables. As
$ git grep -h -E -i \
-e '^[a-z][-a-z0-9]*\.[a-z][-a-z0-9]*::' \
-e '^[a-z][-a-z0-9]*\.(\*|<?[a-z][-a-z0-9]*>?)\.(\*|<?[a-z][-a-z0-9]*>?)::' \
Documentation/config
gives many hits with camelCased names, it might be a good place to start.
Pretending that the above gives a good "canonical list" (it does not yet, if you look at the hits), I got curious how far we can go.
Massaging the output from the above into config-variables.lst
$ ... above command ... |
sed -e 's/::$//' |
sort -u >config-variables.lst
and then to extract use of these tokens in the main part of the documentation like this:
$ git grep -h -o -i -F -f config-variables.lst -- \
Documentation/ ':!Documentation/RelNotes/' | sort -u >config-usage.lst
gives us something we can compare with the "canonical" usage list.
$ comm -3 config-usage.lst config-variables.lst blame.blankboundary
core.excludesfile
core.filemode
core.gitproxy
core.ignorestat
core.logallrefupdates core.repositoryformatversion core.trustCtime
http.sslverify
http.sslversion
i18n.commitencoding
push.pushoption remote.<name>.partialCloneFilter remote.pushdefault repack.UseDeltaBaseOffset sendemail.aliasesfile showbranch.default
transfer.hiderefs uploadArchive.allowUnreachable
Some of them may be false hits, some may be showing that the copy in Documentation/config/ are spelled in all lowercase, but the majority of the hits above seem to be genuine errors similar to what you fixed in your patch.
Thanks.
and as I identified a handful of low hanging fruits that way, here are a few patches on top of his patch that started the whole thing.
I think we should make sure Documentation/config/*.txt
- spells all the configuration variables in the way we want to see them, and
- covers all the configuration variables.
before we can proceed with more low hanging fruits with confidence, as I do think the coverage is very good, but I know it is not 100%, and the eventual goal should be to make sure we can teach lint-docs to catch these before the reviewers even see them.
Denton Liu (1):
i18n.txt: camel case and monospace "i18n.commitEncoding"
Junio C Hamano (2):
blame-options.txt: camelcase blame.blankBoundary index-format doc: camelCase core.excludesFile
Documentation/blame-options.txt | 2 +- Documentation/git-am.txt | 2 +- Documentation/git-mailinfo.txt | 4 ++-- Documentation/i18n.txt | 2 +- Documentation/technical/index-format.txt | 4 ++-- 5 files changed, 7 insertions(+), 7 deletions(-)
Signature · 1 line
2.30.1-826-g07a034c5ea
PATCH v3 1/3 i18n.txt: camel case and monospace "i18n.commitEncoding"
From: Denton Liu <[email protected]>
In 95791be750 (doc: camelCase the i18n config variables to improve readability, 2017-07-17), the other i18n config variables were camel cased. However, this one instance was missed.
Camel case and monospace "i18n.commitEncoding" so that it matches the surrounding text.
--- Documentation/git-am.txt | 2 +- Documentation/git-mailinfo.txt | 4 ++-- Documentation/i18n.txt | 2 +- 3 files changed, 4 insertions(+), 4 deletions(-)
Documentation/git-am.txt +1 -1
@@ -79,7 +79,7 @@ OPTIONS Pass `-u` flag to 'git mailinfo' (see linkgit:git-mailinfo[1]). The proposed commit log message taken from the e-mail is re-coded into UTF-8 encoding (configuration variable - `i18n.commitencoding` can be used to specify project's + `i18n.commitEncoding` can be used to specify project's preferred encoding if it is not UTF-8). + This was optional in prior versions of git, but now it is the
Documentation/git-mailinfo.txt +2 -2
@@ -53,7 +53,7 @@ character. The commit log message, author name and author email are taken from the e-mail, and after minimally decoding MIME transfer encoding, re-coded in the charset specified by - i18n.commitencoding (defaulting to UTF-8) by transliterating + `i18n.commitEncoding` (defaulting to UTF-8) by transliterating them. This used to be optional but now it is the default. + Note that the patch is always used as-is without charset
@@ -61,7 +61,7 @@ conversion, even with this flag. --encoding=<encoding>:: Similar to -u. But when re-coding, the charset specified here is - used instead of the one specified by i18n.commitencoding or UTF-8. + used instead of the one specified by `i18n.commitEncoding` or UTF-8. -n:: Disable all charset re-coding of the metadata.
Documentation/i18n.txt +1 -1
@@ -38,7 +38,7 @@ mind. a warning if the commit log message given to it does not look like a valid UTF-8 string, unless you explicitly say your project uses a legacy encoding. The way to say this is to - have i18n.commitencoding in `.git/config` file, like this: + have `i18n.commitEncoding` in `.git/config` file, like this: + ------------ [i18n]
Signature · 1 line
2.30.1-826-g07a034c5ea
PATCH v3 2/3 blame-options.txt: camelcase blame.blankBoundary
In reply to Junio C HamanoAll other references to blame.* configuration variables are camelCased already. Update this one to match.
--- Documentation/blame-options.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
Documentation/blame-options.txt +1 -1
@@ -1,6 +1,6 @@ -b:: Show blank SHA-1 for boundary commits. This can also - be controlled via the `blame.blankboundary` config option. + be controlled via the `blame.blankBoundary` config option. --root:: Do not treat root commits as boundaries. This can also be
Signature · 1 line
2.30.1-826-g07a034c5ea
PATCH v3 3/3 index-format doc: camelCase core.excludesFile
In reply to Junio C Hamano--- Documentation/technical/index-format.txt | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
Documentation/technical/index-format.txt +2 -2
@@ -251,14 +251,14 @@ Git index format - Stat data of $GIT_DIR/info/exclude. See "Index entry" section from ctime field until "file size". - - Stat data of core.excludesfile + - Stat data of core.excludesFile - 32-bit dir_flags (see struct dir_struct) - Hash of $GIT_DIR/info/exclude. A null hash means the file does not exist. - - Hash of core.excludesfile. A null hash means the file does + - Hash of core.excludesFile. A null hash means the file does not exist. - NUL-terminated string of per-dir exclude file name. This usually
Signature · 1 line
2.30.1-826-g07a034c5ea
PATCH 2/3 git-cat-file.txt: monospace args and placeholders
In reply to Denton LiuIn modern documentation, args and placeholders are monospaced. Format all remaining args and placeholders as monospace.
--- Documentation/git-cat-file.txt | 42 +++++++++++++++++----------------- 1 file changed, 21 insertions(+), 21 deletions(-)
Documentation/git-cat-file.txt +21 -21
@@ -35,42 +35,42 @@ OPTIONS -t:: Instead of the content, show the object type identified by - <object>. + `<object>`. -s:: Instead of the content, show the object size identified by - <object>. + `<object>`. -e:: - Exit with zero status if <object> exists and is a valid - object. If <object> is of an invalid format exit with non-zero and + Exit with zero status if `<object>` exists and is a valid + object. If `<object>` is of an invalid format exit with non-zero and emits an error on stderr. -p:: - Pretty-print the contents of <object> based on its type. + Pretty-print the contents of `<object>` based on its type. <type>:: - Typically this matches the real type of <object> but asking + Typically this matches the real type of `<object>` but asking for a type that can trivially be dereferenced from the given - <object> is also permitted. An example is to ask for a - "tree" with <object> being a commit object that contains it, - or to ask for a "blob" with <object> being a tag object that + `<object>` is also permitted. An example is to ask for a + "tree" with `<object>` being a commit object that contains it, + or to ask for a "blob" with `<object>` being a tag object that points at it. --textconv:: Show the content as transformed by a textconv filter. In this case, - <object> has to be of the form <tree-ish>:<path>, or :<path> in + `<object>` has to be of the form `<tree-ish>:<path>`, or `:<path>` in order to apply the filter to the content recorded in the index at - <path>. + `<path>`. --filters:: Show the content as converted by the filters configured in - the current working tree for the given <path> (i.e. smudge filters, - end-of-line conversion, etc). In this case, <object> has to be of - the form <tree-ish>:<path>, or :<path>. + the current working tree for the given `<path>` (i.e. smudge filters, + end-of-line conversion, etc). In this case, `<object>` has to be of + the form `<tree-ish>:<path>`, or `:<path>`. --path=<path>:: - For use with --textconv or --filters, to allow specifying an object + For use with `--textconv` or `--filters`, to allow specifying an object name and a path separately, e.g. when it is difficult to figure out the revision from which the blob came.
@@ -115,7 +115,7 @@ OPTIONS repository. --allow-unknown-type:: - Allow -s or -t to query broken/corrupt objects of unknown type. + Allow `-s` or `-t` to query broken/corrupt objects of unknown type. --follow-symlinks:: With --batch or --batch-check, follow symlinks inside the
@@ -175,15 +175,15 @@ respectively print: OUTPUT ------ -If `-t` is specified, one of the <type>. +If `-t` is specified, one of the `<type>`. -If `-s` is specified, the size of the <object> in bytes. +If `-s` is specified, the size of the `<object>` in bytes. -If `-e` is specified, no output, unless the <object> is malformed. +If `-e` is specified, no output, unless the `<object>` is malformed. -If `-p` is specified, the contents of <object> are pretty-printed. +If `-p` is specified, the contents of `<object>` are pretty-printed. -If <type> is specified, the raw (though uncompressed) contents of the <object> +If `<type>` is specified, the raw (though uncompressed) contents of the `<object>` will be returned. BATCH OUTPUT
Signature · 1 line
2.30.0.478.g8a0d178c01
Re: [PATCH 2/3] git-cat-file.txt: monospace args and placeholders
Documentation/git-cat-file.txt OPTIONS · line 119
Quoted 13 lines · Denton Liu
In modern documentation, args and placeholders are monospaced. Format all remaining args and placeholders as monospace.
Signed-off-by Denton Liu <[email protected]>---
Documentation/git-cat-file.txt +1
-1@@ -115,7 +115,7 @@ OPTIONS --allow-unknown-type:: - Allow -s or -t to query broken/corrupt objects of unknown type. + Allow `-s` or `-t` to query broken/corrupt objects of unknown type. --follow-symlinks:: With --batch or --batch-check, follow symlinks inside the
Missed these? --batch, --batch-check
PATCH 2/3 git-cat-file.txt: monospace args, placeholders and filenames
In reply to Denton LiuIn modern documentation, args, placeholders and filenames are monospaced. Apply monospace formatting to these objects.
---
Thanks for catching the omission, Eric. I've gone through the documentation with a fine-tooth comb and caught many more missing instances.
Documentation/git-cat-file.txt | 56 +++++++++++++++++----------------- 1 file changed, 28 insertions(+), 28 deletions(-)
Documentation/git-cat-file.txt +28 -28
@@ -35,42 +35,42 @@ OPTIONS -t:: Instead of the content, show the object type identified by - <object>. + `<object>`. -s:: Instead of the content, show the object size identified by - <object>. + `<object>`. -e:: - Exit with zero status if <object> exists and is a valid - object. If <object> is of an invalid format exit with non-zero and + Exit with zero status if `<object>` exists and is a valid + object. If `<object>` is of an invalid format exit with non-zero and emits an error on stderr. -p:: - Pretty-print the contents of <object> based on its type. + Pretty-print the contents of `<object>` based on its type. <type>:: - Typically this matches the real type of <object> but asking + Typically this matches the real type of `<object>` but asking for a type that can trivially be dereferenced from the given - <object> is also permitted. An example is to ask for a - "tree" with <object> being a commit object that contains it, - or to ask for a "blob" with <object> being a tag object that + `<object>` is also permitted. An example is to ask for a + "tree" with `<object>` being a commit object that contains it, + or to ask for a "blob" with `<object>` being a tag object that points at it. --textconv:: Show the content as transformed by a textconv filter. In this case, - <object> has to be of the form <tree-ish>:<path>, or :<path> in + `<object>` has to be of the form `<tree-ish>:<path>`, or `:<path>` in order to apply the filter to the content recorded in the index at - <path>. + `<path>`. --filters:: Show the content as converted by the filters configured in - the current working tree for the given <path> (i.e. smudge filters, - end-of-line conversion, etc). In this case, <object> has to be of - the form <tree-ish>:<path>, or :<path>. + the current working tree for the given `<path>` (i.e. smudge filters, + end-of-line conversion, etc). In this case, `<object>` has to be of + the form `<tree-ish>:<path>`, or `:<path>`. --path=<path>:: - For use with --textconv or --filters, to allow specifying an object + For use with `--textconv` or `--filters`, to allow specifying an object name and a path separately, e.g. when it is difficult to figure out the revision from which the blob came.
@@ -115,15 +115,15 @@ OPTIONS repository. --allow-unknown-type:: - Allow -s or -t to query broken/corrupt objects of unknown type. + Allow `-s` or `-t` to query broken/corrupt objects of unknown type. --follow-symlinks:: - With --batch or --batch-check, follow symlinks inside the + With `--batch` or `--batch-check`, follow symlinks inside the repository when requesting objects with extended SHA-1 expressions of the form tree-ish:path-in-tree. Instead of providing output about the link itself, provide output about the linked-to object. If a symlink points outside the - tree-ish (e.g. a link to /foo or a root-level link to ../foo), + tree-ish (e.g. a link to `/foo` or a root-level link to `../foo`), the portion of the link which is outside the tree will be printed. +
@@ -175,15 +175,15 @@ respectively print: OUTPUT ------ -If `-t` is specified, one of the <type>. +If `-t` is specified, one of the `<type>`. -If `-s` is specified, the size of the <object> in bytes. +If `-s` is specified, the size of the `<object>` in bytes. -If `-e` is specified, no output, unless the <object> is malformed. +If `-e` is specified, no output, unless the `<object>` is malformed. -If `-p` is specified, the contents of <object> are pretty-printed. +If `-p` is specified, the contents of `<object>` are pretty-printed. -If <type> is specified, the raw (though uncompressed) contents of the <object> +If `<type>` is specified, the raw (though uncompressed) contents of the `<object>` will be returned. BATCH OUTPUT
@@ -258,7 +258,7 @@ If a name is specified that might refer to more than one object (an ambiguous sh <object> SP ambiguous LF ------------ -If --follow-symlinks is used, and a symlink in the repository points +If `--follow-symlinks` is used, and a symlink in the repository points outside the repository, then `cat-file` will ignore any custom format and print:
@@ -267,11 +267,11 @@ symlink SP <size> LF <symlink> LF ------------ -The symlink will either be absolute (beginning with a /), or relative -to the tree root. For instance, if dir/link points to ../../foo, then -<symlink> will be ../foo. <size> is the size of the symlink in bytes. +The symlink will either be absolute (beginning with a `/`), or relative +to the tree root. For instance, if dir/link points to `../../foo`, then +`<symlink>` will be `../foo`. `<size>` is the size of the symlink in bytes. -If --follow-symlinks is used, the following error messages will be +If `--follow-symlinks` is used, the following error messages will be displayed: ------------
Signature · 1 line
2.30.1.823.g0a3b79fd18
PATCH 3/3 git-cat-file.txt: remove references to "sha1"
In reply to Denton LiuAs part of the hash-transition, git can operate on more than just SHA-1 repositories. Replace "sha1"-specific documentation with hash-agnostic terminology.
--- Documentation/git-cat-file.txt | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)
Documentation/git-cat-file.txt +5 -5
@@ -200,7 +200,7 @@ object, with placeholders of the form `%(atom)` expanded, followed by a newline. The available atoms are: `objectname`:: - The 40-hex object name of the object. + The full hex representation of the object. `objecttype`:: The type of the object (the same as `cat-file -t` reports).
@@ -215,8 +215,8 @@ newline. The available atoms are: `deltabase`:: If the object is stored as a delta on-disk, this expands to the - 40-hex sha1 of the delta base object. Otherwise, expands to the - null sha1 (40 zeroes). See `CAVEATS` below. + full hex representation of the delta base object. Otherwise, expands to the + null OID (all zeroes). See `CAVEATS` below. `rest`:: If this atom is used in the output string, input lines are split
@@ -235,14 +235,14 @@ newline. For example, `--batch` without a custom format would produce: ------------ -<sha1> SP <type> SP <size> LF +<oid> SP <type> SP <size> LF <contents> LF ------------ Whereas `--batch-check='%(objectname) %(objecttype)'` would produce: ------------ -<sha1> SP <type> LF +<oid> SP <type> LF ------------ If a name is specified on stdin that cannot be resolved to an object in
Signature · 1 line
2.30.0.478.g8a0d178c01
Re: [PATCH 3/3] git-cat-file.txt: remove references to "sha1"
Documentation/git-cat-file.txt object, with placeholders of the form `%(atom)` expanded, followed by a · line 201
Quoted 11 lines · Denton Liu
As part of the hash-transition, git can operate on more than just SHA-1 repositories. Replace "sha1"-specific documentation with hash-agnostic terminology.
Signed-off-by Denton Liu <[email protected]>---
Documentation/git-cat-file.txt +1
-1@@ -200,7 +200,7 @@ object, with placeholders of the form `%(atom)` expanded, followed by a `objectname`:: - The 40-hex object name of the object. + The full hex representation of the object.
I find this new terminology confusing and ambiguous. To me, this seems to be saying that it is a hex representation of the entire object rather than a hex representation of the hash of the object. Perhaps say either "hex representation of the hash of the object" or "hex representation of the object ID"?
Documentation/git-cat-file.txt newline. The available atoms are: · line 218
Quoted 7 lines
Documentation/git-cat-file.txt +2
-2@@ -215,8 +215,8 @@ newline. The available atoms are: `deltabase`:: If the object is stored as a delta on-disk, this expands to the - 40-hex sha1 of the delta base object. Otherwise, expands to the - null sha1 (40 zeroes). See `CAVEATS` below. + full hex representation of the delta base object. Otherwise, expands to the + null OID (all zeroes). See `CAVEATS` below.
Same issue. "hex representation of the delta base object" sounds misleading. Should probably mention "hash of the" in there somewhere or something.
PATCH v2 1/1 git-cat-file.txt: remove references to "sha1"
In reply to Denton LiuAs part of the hash-transition, git can operate on more than just SHA-1 repositories. Replace "sha1"-specific documentation with hash-agnostic terminology.
--- Documentation/git-cat-file.txt | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-)
Documentation/git-cat-file.txt +6 -5
@@ -200,7 +200,7 @@ object, with placeholders of the form `%(atom)` expanded, followed by a newline. The available atoms are: `objectname`:: - The 40-hex object name of the object. + The full hex representation of the object ID of the object. `objecttype`:: The type of the object (the same as `cat-file -t` reports).
@@ -215,8 +215,9 @@ newline. The available atoms are: `deltabase`:: If the object is stored as a delta on-disk, this expands to the - 40-hex sha1 of the delta base object. Otherwise, expands to the - null sha1 (40 zeroes). See `CAVEATS` below. + full hex representation of the object ID of the delta base + object. Otherwise, expands to the null OID (all zeroes). See + `CAVEATS` below. `rest`:: If this atom is used in the output string, input lines are split
@@ -235,14 +236,14 @@ newline. For example, `--batch` without a custom format would produce: ------------ -<sha1> SP <type> SP <size> LF +<oid> SP <type> SP <size> LF <contents> LF ------------ Whereas `--batch-check='%(objectname) %(objecttype)'` would produce: ------------ -<sha1> SP <type> LF +<oid> SP <type> LF ------------ If a name is specified on stdin that cannot be resolved to an object in
Signature · 1 line
2.30.1.823.g0a3b79fd18
Re: [PATCH v2] git-cat-file.txt: remove references to "sha1"
Documentation/git-cat-file.txt object, with placeholders of the form `%(atom)` expanded, followed by a · line 203
Quoted 3 lines · Denton Liu
objectname::Documentation/git-cat-file.txt +1
-1- The 40-hex object name of the object. + The full hex representation of the object ID of the object.
While I agree that it is a good idea to move away from an explicit mention of "40", I do not see why we would want to explain "object name" not as "object name" but as "object ID". IOW, s/ID/name/.
Documentation/git-cat-file.txt newline. The available atoms are: · line 220
Quoted 9 lines
Documentation/git-cat-file.txt +3
-2@@ -215,8 +215,9 @@ newline. The available atoms are: `deltabase`:: If the object is stored as a delta on-disk, this expands to the - 40-hex sha1 of the delta base object. Otherwise, expands to the - null sha1 (40 zeroes). See `CAVEATS` below. + full hex representation of the object ID of the delta base + object. Otherwise, expands to the null OID (all zeroes). See + `CAVEATS` below.
Likewise. Documentation/glossary-content.txt says "object name" is the canonical term, with "object identifier", "hash" etc. as its synonyms.
Quoted 5 lines
Documentation/git-cat-file.txt +0
-1@@ -235,14 +236,14 @@ newline. For example, `--batch` without a custom format would produce: ------------ -<sha1> SP <type> SP <size> LF
Documentation/git-cat-file.txt newline. · line 247
Quoted 10 lines
Documentation/git-cat-file.txt +2
-1+<oid> SP <type> SP <size> LF <contents> LF ------------ Whereas `--batch-check='%(objectname) %(objecttype)'` would produce: ------------ -<sha1> SP <type> LF +<oid> SP <type> LF ------------
These look good.
Thanks.
v2 cover git-cat-file.txt: doc cleanup
In reply to Denton LiuA couple of fixes that I've noticed in passing.
Changes since v1:
* Drop 'i18n.txt: camel case and monospace "i18n.commitEncoding"' (it's already merged to 'master')
* Change "object ID of the object" to "object name"
Denton Liu (2):
git-cat-file.txt: monospace args, placeholders and filenames git-cat-file.txt: remove references to "sha1"
Documentation/git-cat-file.txt | 67 +++++++++++++++++----------------- 1 file changed, 34 insertions(+), 33 deletions(-)
Range-diff against v1:
1: cc48b12516 < -: ---------- i18n.txt: camel case and monospace "i18n.commitEncoding" 2: 7dab69ce23 = 1: 6d044cf540 git-cat-file.txt: monospace args, placeholders and filenames 3: 4030a678b9 ! 2: 1b57fdad97 git-cat-file.txt: remove references to "sha1"
@@ Documentation/git-cat-file.txt: object, with placeholders of the form %(atom)
objectname::
- The 40-hex object name of the object.
-+ The full hex representation of the object ID of the object.
++ The full hex representation of the object name.
objecttype::
The type of the object (the same as cat-file -t reports).
@@ Documentation/git-cat-file.txt: newline. The available atoms are:
If the object is stored as a delta on-disk, this expands to the
- 40-hex sha1 of the delta base object. Otherwise, expands to the
- null sha1 (40 zeroes). See CAVEATS below.
-+ full hex representation of the object ID of the delta base
-+ object. Otherwise, expands to the null OID (all zeroes). See
-+ CAVEATS below.
++ full hex representation of the delta base object name.
++ Otherwise, expands to the null OID (all zeroes). See CAVEATS
++ below.
rest::
If this atom is used in the output string, input lines are split
Signature · 1 line
2.30.1.823.g0a3b79fd18
PATCH v2 1/2 git-cat-file.txt: monospace args, placeholders and filenames
In modern documentation, args, placeholders and filenames are monospaced. Apply monospace formatting to these objects.
--- Documentation/git-cat-file.txt | 56 +++++++++++++++++----------------- 1 file changed, 28 insertions(+), 28 deletions(-)
Documentation/git-cat-file.txt +28 -28
@@ -35,42 +35,42 @@ OPTIONS -t:: Instead of the content, show the object type identified by - <object>. + `<object>`. -s:: Instead of the content, show the object size identified by - <object>. + `<object>`. -e:: - Exit with zero status if <object> exists and is a valid - object. If <object> is of an invalid format exit with non-zero and + Exit with zero status if `<object>` exists and is a valid + object. If `<object>` is of an invalid format exit with non-zero and emits an error on stderr. -p:: - Pretty-print the contents of <object> based on its type. + Pretty-print the contents of `<object>` based on its type. <type>:: - Typically this matches the real type of <object> but asking + Typically this matches the real type of `<object>` but asking for a type that can trivially be dereferenced from the given - <object> is also permitted. An example is to ask for a - "tree" with <object> being a commit object that contains it, - or to ask for a "blob" with <object> being a tag object that + `<object>` is also permitted. An example is to ask for a + "tree" with `<object>` being a commit object that contains it, + or to ask for a "blob" with `<object>` being a tag object that points at it. --textconv:: Show the content as transformed by a textconv filter. In this case, - <object> has to be of the form <tree-ish>:<path>, or :<path> in + `<object>` has to be of the form `<tree-ish>:<path>`, or `:<path>` in order to apply the filter to the content recorded in the index at - <path>. + `<path>`. --filters:: Show the content as converted by the filters configured in - the current working tree for the given <path> (i.e. smudge filters, - end-of-line conversion, etc). In this case, <object> has to be of - the form <tree-ish>:<path>, or :<path>. + the current working tree for the given `<path>` (i.e. smudge filters, + end-of-line conversion, etc). In this case, `<object>` has to be of + the form `<tree-ish>:<path>`, or `:<path>`. --path=<path>:: - For use with --textconv or --filters, to allow specifying an object + For use with `--textconv` or `--filters`, to allow specifying an object name and a path separately, e.g. when it is difficult to figure out the revision from which the blob came.
@@ -115,15 +115,15 @@ OPTIONS repository. --allow-unknown-type:: - Allow -s or -t to query broken/corrupt objects of unknown type. + Allow `-s` or `-t` to query broken/corrupt objects of unknown type. --follow-symlinks:: - With --batch or --batch-check, follow symlinks inside the + With `--batch` or `--batch-check`, follow symlinks inside the repository when requesting objects with extended SHA-1 expressions of the form tree-ish:path-in-tree. Instead of providing output about the link itself, provide output about the linked-to object. If a symlink points outside the - tree-ish (e.g. a link to /foo or a root-level link to ../foo), + tree-ish (e.g. a link to `/foo` or a root-level link to `../foo`), the portion of the link which is outside the tree will be printed. +
@@ -175,15 +175,15 @@ respectively print: OUTPUT ------ -If `-t` is specified, one of the <type>. +If `-t` is specified, one of the `<type>`. -If `-s` is specified, the size of the <object> in bytes. +If `-s` is specified, the size of the `<object>` in bytes. -If `-e` is specified, no output, unless the <object> is malformed. +If `-e` is specified, no output, unless the `<object>` is malformed. -If `-p` is specified, the contents of <object> are pretty-printed. +If `-p` is specified, the contents of `<object>` are pretty-printed. -If <type> is specified, the raw (though uncompressed) contents of the <object> +If `<type>` is specified, the raw (though uncompressed) contents of the `<object>` will be returned. BATCH OUTPUT
@@ -258,7 +258,7 @@ If a name is specified that might refer to more than one object (an ambiguous sh <object> SP ambiguous LF ------------ -If --follow-symlinks is used, and a symlink in the repository points +If `--follow-symlinks` is used, and a symlink in the repository points outside the repository, then `cat-file` will ignore any custom format and print:
@@ -267,11 +267,11 @@ symlink SP <size> LF <symlink> LF ------------ -The symlink will either be absolute (beginning with a /), or relative -to the tree root. For instance, if dir/link points to ../../foo, then -<symlink> will be ../foo. <size> is the size of the symlink in bytes. +The symlink will either be absolute (beginning with a `/`), or relative +to the tree root. For instance, if dir/link points to `../../foo`, then +`<symlink>` will be `../foo`. `<size>` is the size of the symlink in bytes. -If --follow-symlinks is used, the following error messages will be +If `--follow-symlinks` is used, the following error messages will be displayed: ------------
Signature · 1 line
2.30.1.823.g0a3b79fd18
PATCH v2 2/2 git-cat-file.txt: remove references to "sha1"
In reply to Denton LiuAs part of the hash-transition, git can operate on more than just SHA-1 repositories. Replace "sha1"-specific documentation with hash-agnostic terminology.
--- Documentation/git-cat-file.txt | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-)
Documentation/git-cat-file.txt +6 -5
@@ -200,7 +200,7 @@ object, with placeholders of the form `%(atom)` expanded, followed by a newline. The available atoms are: `objectname`:: - The 40-hex object name of the object. + The full hex representation of the object name. `objecttype`:: The type of the object (the same as `cat-file -t` reports).
@@ -215,8 +215,9 @@ newline. The available atoms are: `deltabase`:: If the object is stored as a delta on-disk, this expands to the - 40-hex sha1 of the delta base object. Otherwise, expands to the - null sha1 (40 zeroes). See `CAVEATS` below. + full hex representation of the delta base object name. + Otherwise, expands to the null OID (all zeroes). See `CAVEATS` + below. `rest`:: If this atom is used in the output string, input lines are split
@@ -235,14 +236,14 @@ newline. For example, `--batch` without a custom format would produce: ------------ -<sha1> SP <type> SP <size> LF +<oid> SP <type> SP <size> LF <contents> LF ------------ Whereas `--batch-check='%(objectname) %(objecttype)'` would produce: ------------ -<sha1> SP <type> LF +<oid> SP <type> LF ------------ If a name is specified on stdin that cannot be resolved to an object in
Signature · 1 line
2.30.1.823.g0a3b79fd18
Re: [PATCH v2 0/2] git-cat-file.txt: doc cleanup
In reply to Denton LiuQuoted 3 lines · Denton Liu
Denton Liu (2):
git-cat-file.txt: monospace args, placeholders and filenames git-cat-file.txt: remove references to "sha1"
Thanks, will queue.