Skip to contentSkip to conversation

selftests/bpf: add a verifier scale test with unknown bounded loop

PATCH Superseded Yonghong Song 2 participants 4 messages Feb 26, 2021

Subsystems (3)

v1 of 2 Superseded Latest is v2 →

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 selftests/bpf: add a verifier scale test with unknown bounded loop

The orignal bcc pull request
https://github.com/iovisor/bcc/pull/3270
exposed a verifier failure with Clang 12/13 while Clang 4 works fine. Further investigation exposed two issues.
Issue 1: LLVM may generate code which uses less refined
value. The issue is fixed in llvm patch
https://reviews.llvm.org/D97479
Issue 2: Spills with initial value 0 are marked as precise
which makes later state pruning less effective. This is my rough initial analysis and further investigation is needed to find how to improve verifier pruning in such cases.

With the above llvm patch, for the new loop6.c test, which has smaller loop bound compared to original test, I got

  $ test_progs -s -n 10/16
  ...
  stack depth 64
  processed 405099 insns (limit 1000000) max_states_per_insn 92
      total_states 8866 peak_states 889 mark_read 6
  #10/16 loop6.o:OK

Use the original loop bound, i.e., commenting out "#define WORKAROUND", I got

  $ test_progs -s -n 10/16
  ...
  BPF program is too large. Processed 1000001 insn
  stack depth 64
  processed 1000001 insns (limit 1000000) max_states_per_insn 91
      total_states 23176 peak_states 5069 mark_read 6
  ...
  #10/16 loop6.o:FAIL

The purpose of this patch is to provide a regression test for the above llvm fix and also provide a test case for further analyzing the verifier pruning issue.

---
 tools/testing/selftests/bpf/README.rst        |  39 +++++++
 .../bpf/prog_tests/bpf_verif_scale.c          |   1 +
 tools/testing/selftests/bpf/progs/loop6.c     | 101 ++++++++++++++++++
 3 files changed, 141 insertions(+)
 create mode 100644 tools/testing/selftests/bpf/progs/loop6.c
tools/testing/selftests/bpf/README.rst +39 -0
index fd148b8410fa..dbc8f6cc5c67 100644
@@ -111,6 +111,45 @@ available in 10.0.1. The patch is available in llvm 11.0.0 trunk.
 
 __  https://reviews.llvm.org/D78466
 
+bpf_verif_scale/loop6.o test failure with Clang 12
+==================================================
+
+With Clang 12, the following bpf_verif_scale test failed:
+  * ``bpf_verif_scale/loop6.o``
+
+The verifier output looks like
+
+.. code-block:: c
+
+  R1 type=ctx expected=fp
+  The sequence of 8193 jumps is too complex.
+
+The reason is compiler generating the following code
+
+.. code-block:: c
+
+  ;       for (i = 0; (i < VIRTIO_MAX_SGS) && (i < num); i++) {
+      14:       16 05 40 00 00 00 00 00 if w5 == 0 goto +64 <LBB0_6>
+      15:       bc 51 00 00 00 00 00 00 w1 = w5
+      16:       04 01 00 00 ff ff ff ff w1 += -1
+      17:       67 05 00 00 20 00 00 00 r5 <<= 32
+      18:       77 05 00 00 20 00 00 00 r5 >>= 32
+      19:       a6 01 01 00 05 00 00 00 if w1 < 5 goto +1 <LBB0_4>
+      20:       b7 05 00 00 06 00 00 00 r5 = 6
+  00000000000000a8 <LBB0_4>:
+      21:       b7 02 00 00 00 00 00 00 r2 = 0
+      22:       b7 01 00 00 00 00 00 00 r1 = 0
+  ;       for (i = 0; (i < VIRTIO_MAX_SGS) && (i < num); i++) {
+      23:       7b 1a e0 ff 00 00 00 00 *(u64 *)(r10 - 32) = r1
+      24:       7b 5a c0 ff 00 00 00 00 *(u64 *)(r10 - 64) = r5
+
+Note that insn #15 has w1 = w5 and w1 is refined later but
+r5(w5) is eventually saved on stack at insn #24 for later use.
+This cause later verifier failure. The bug has been `fixed`__ in
+Clang 13.
+
+__  https://reviews.llvm.org/D97479
+
 BPF CO-RE-based tests and Clang version
 =======================================
 
tools/testing/selftests/bpf/prog_tests/bpf_verif_scale.c +1 -0
index e698ee6bb6c2..3d002c245d2b 100644
@@ -76,6 +76,7 @@ void test_bpf_verif_scale(void)
 		{ "loop2.o", BPF_PROG_TYPE_RAW_TRACEPOINT },
 		{ "loop4.o", BPF_PROG_TYPE_SCHED_CLS },
 		{ "loop5.o", BPF_PROG_TYPE_SCHED_CLS },
+		{ "loop6.o", BPF_PROG_TYPE_KPROBE },
 
 		/* partial unroll. 19k insn in a loop.
 		 * Total program size 20.8k insn.
tools/testing/selftests/bpf/progs/loop6.c new file +101 -0

101 lines not on this page · raw message

Signature · 1 line
2.24.1
#1 lore raw
Quoted 144 lines · Yonghong Song

The orignal bcc pull request
https://github.com/iovisor/bcc/pull/3270
exposed a verifier failure with Clang 12/13 while Clang 4 works fine. Further investigation exposed two issues.
Issue 1: LLVM may generate code which uses less refined
value. The issue is fixed in llvm patch
https://reviews.llvm.org/D97479
Issue 2: Spills with initial value 0 are marked as precise
which makes later state pruning less effective. This is my rough initial analysis and further investigation is needed to find how to improve verifier pruning in such cases.

With the above llvm patch, for the new loop6.c test, which has smaller loop bound compared to original test, I got

  $ test_progs -s -n 10/16
  ...
  stack depth 64
  processed 405099 insns (limit 1000000) max_states_per_insn 92
      total_states 8866 peak_states 889 mark_read 6
  #10/16 loop6.o:OK

Use the original loop bound, i.e., commenting out "#define WORKAROUND", I got

  $ test_progs -s -n 10/16
  ...
  BPF program is too large. Processed 1000001 insn
  stack depth 64
  processed 1000001 insns (limit 1000000) max_states_per_insn 91
      total_states 23176 peak_states 5069 mark_read 6
  ...
  #10/16 loop6.o:FAIL

The purpose of this patch is to provide a regression test for the above llvm fix and also provide a test case for further analyzing the verifier pruning issue.

---
 tools/testing/selftests/bpf/README.rst        |  39 +++++++
 .../bpf/prog_tests/bpf_verif_scale.c          |   1 +
 tools/testing/selftests/bpf/progs/loop6.c     | 101 ++++++++++++++++++
 3 files changed, 141 insertions(+)
 create mode 100644 tools/testing/selftests/bpf/progs/loop6.c
tools/testing/selftests/bpf/README.rst +39 -0
index fd148b8410fa..dbc8f6cc5c67 100644
@@ -111,6 +111,45 @@ available in 10.0.1. The patch is available in llvm 11.0.0 trunk.
 
 __  https://reviews.llvm.org/D78466
 
+bpf_verif_scale/loop6.o test failure with Clang 12
+==================================================
+
+With Clang 12, the following bpf_verif_scale test failed:
+  * ``bpf_verif_scale/loop6.o``
+
+The verifier output looks like
+
+.. code-block:: c
+
+  R1 type=ctx expected=fp
+  The sequence of 8193 jumps is too complex.
+
+The reason is compiler generating the following code
+
+.. code-block:: c
+
+  ;       for (i = 0; (i < VIRTIO_MAX_SGS) && (i < num); i++) {
+      14:       16 05 40 00 00 00 00 00 if w5 == 0 goto +64 <LBB0_6>
+      15:       bc 51 00 00 00 00 00 00 w1 = w5
+      16:       04 01 00 00 ff ff ff ff w1 += -1
+      17:       67 05 00 00 20 00 00 00 r5 <<= 32
+      18:       77 05 00 00 20 00 00 00 r5 >>= 32
+      19:       a6 01 01 00 05 00 00 00 if w1 < 5 goto +1 <LBB0_4>
+      20:       b7 05 00 00 06 00 00 00 r5 = 6
+  00000000000000a8 <LBB0_4>:
+      21:       b7 02 00 00 00 00 00 00 r2 = 0
+      22:       b7 01 00 00 00 00 00 00 r1 = 0
+  ;       for (i = 0; (i < VIRTIO_MAX_SGS) && (i < num); i++) {
+      23:       7b 1a e0 ff 00 00 00 00 *(u64 *)(r10 - 32) = r1
+      24:       7b 5a c0 ff 00 00 00 00 *(u64 *)(r10 - 64) = r5
+
+Note that insn #15 has w1 = w5 and w1 is refined later but
+r5(w5) is eventually saved on stack at insn #24 for later use.
+This cause later verifier failure. The bug has been `fixed`__ in
+Clang 13.
+
+__  https://reviews.llvm.org/D97479
+
 BPF CO-RE-based tests and Clang version
 =======================================
 
tools/testing/selftests/bpf/prog_tests/bpf_verif_scale.c +1 -0
index e698ee6bb6c2..3d002c245d2b 100644
@@ -76,6 +76,7 @@ void test_bpf_verif_scale(void)
                { "loop2.o", BPF_PROG_TYPE_RAW_TRACEPOINT },
                { "loop4.o", BPF_PROG_TYPE_SCHED_CLS },
                { "loop5.o", BPF_PROG_TYPE_SCHED_CLS },
+               { "loop6.o", BPF_PROG_TYPE_KPROBE },
 
                /* partial unroll. 19k insn in a loop.
                 * Total program size 20.8k insn.
tools/testing/selftests/bpf/progs/loop6.c new file +29 -0
new file mode 100644
index 000000000000..fe535922bed8
@@ -0,0 +1,101 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <linux/ptrace.h>
+#include <stddef.h>
+#include <linux/bpf.h>
+#include <bpf/bpf_helpers.h>
+#include <bpf/bpf_tracing.h>
+
+char _license[] SEC("license") = "GPL";
+
+/* typically virtio scsi has max SGs of 6 */
+#define VIRTIO_MAX_SGS 6
+
+/* Verifier will fail with SG_MAX = 128. The failure can be
+ * workarounded with a smaller SG_MAX, e.g. 10.
+ */
+#define WORKAROUND
+#ifdef WORKAROUND
+#define SG_MAX         10
+#else
+/* typically virtio blk has max SEG of 128 */
+#define SG_MAX         128
+#endif
+
+#define SG_CHAIN       0x01UL
+#define SG_END         0x02UL
+
+struct scatterlist {
+       unsigned long   page_link;

tools/testing/selftests/bpf/progs/loop6.c line 39

Quoted 10 lines
tools/testing/selftests/bpf/progs/loop6.c new file +10 -0
+       unsigned int    offset;
+       unsigned int    length;
+};
+
+#define sg_is_chain(sg)                ((sg)->page_link & SG_CHAIN)
+#define sg_is_last(sg)         ((sg)->page_link & SG_END)
+#define sg_chain_ptr(sg)       \
+       ((struct scatterlist *) ((sg)->page_link & ~(SG_CHAIN | SG_END)))
+
+static inline struct scatterlist *__sg_next(struct scatterlist *sgp)

nit: here and below, it doesn't have to be inline, does it?

Quoted 19 lines
tools/testing/selftests/bpf/progs/loop6.c new file +19 -0
+{
+       struct scatterlist sg;
+
+       bpf_probe_read_kernel(&sg, sizeof(sg), sgp);
+       if (sg_is_last(&sg))
+               return NULL;
+
+       sgp++;
+
+       bpf_probe_read_kernel(&sg, sizeof(sg), sgp);
+       if (sg_is_chain(&sg))
+               sgp = sg_chain_ptr(&sg);
+
+       return sgp;
+}
+
+static inline struct scatterlist *get_sgp(struct scatterlist **sgs, int i)
+{
+       struct scatterlist *sgp;

tools/testing/selftests/bpf/progs/loop6.c line 68

Quoted 10 lines
tools/testing/selftests/bpf/progs/loop6.c new file +10 -0
+
+       bpf_probe_read_kernel(&sgp, sizeof(sgp), sgs + i);
+       return sgp;
+}
+
+int config = 0;
+int result = 0;
+
+SEC("kprobe/virtqueue_add_sgs")
+int nested_loops(volatile struct pt_regs* ctx)

libbpf provides BPF_KPROBE macro, similar to BPF_PROG for fentry/fexit. Can you please use that instead? You won't need PT_REGS_PARM macroses below, which will lead to nicer and shorter code.

Quoted 36 lines
tools/testing/selftests/bpf/progs/loop6.c new file +33 -1
+{
+       struct scatterlist **sgs = PT_REGS_PARM2(ctx);
+       unsigned int num1 = PT_REGS_PARM3(ctx);
+       unsigned int num2 = PT_REGS_PARM4(ctx);
+       struct scatterlist *sgp = NULL;
+       __u64 length1 = 0, length2 = 0;
+       unsigned int i, n, len;
+
+       if (config != 0)
+               return 0;
+
+       for (i = 0; (i < VIRTIO_MAX_SGS) && (i < num1); i++) {
+               for (n = 0, sgp = get_sgp(sgs, i); sgp && (n < SG_MAX);
+                    sgp = __sg_next(sgp)) {
+                       bpf_probe_read_kernel(&len, sizeof(len), &sgp->length);
+                       length1 += len;
+                       n++;
+               }
+       }
+
+       for (i = 0; (i < VIRTIO_MAX_SGS) && (i < num2); i++) {
+               for (n = 0, sgp = get_sgp(sgs, i); sgp && (n < SG_MAX);
+                    sgp = __sg_next(sgp)) {
+                       bpf_probe_read_kernel(&len, sizeof(len), &sgp->length);
+                       length2 += len;
+                       n++;
+               }
+       }
+
+       config = 1;
+       result = length2 - length1;
+       return 0;
+}
--

2.24.1

#2 lore raw
Quoted 149 lines · Andrii Nakryiko
Quoted 148 lines · Yonghong Song

The orignal bcc pull request
https://github.com/iovisor/bcc/pull/3270
exposed a verifier failure with Clang 12/13 while
Clang 4 works fine. Further investigation exposed two issues.
Issue 1: LLVM may generate code which uses less refined
value. The issue is fixed in llvm patch
https://reviews.llvm.org/D97479
Issue 2: Spills with initial value 0 are marked as precise
which makes later state pruning less effective. This is my rough initial analysis and further investigation is needed to find how to improve verifier pruning in such cases.

With the above llvm patch, for the new loop6.c test, which has smaller loop bound compared to original test, I got

   $ test_progs -s -n 10/16
   ...
   stack depth 64
   processed 405099 insns (limit 1000000) max_states_per_insn 92
       total_states 8866 peak_states 889 mark_read 6
   #10/16 loop6.o:OK

Use the original loop bound, i.e., commenting out "#define WORKAROUND", I got

   $ test_progs -s -n 10/16
   ...
   BPF program is too large. Processed 1000001 insn
   stack depth 64
   processed 1000001 insns (limit 1000000) max_states_per_insn 91
       total_states 23176 peak_states 5069 mark_read 6
   ...
   #10/16 loop6.o:FAIL

The purpose of this patch is to provide a regression test for the above llvm fix and also provide a test case for further analyzing the verifier pruning issue.

---
  tools/testing/selftests/bpf/README.rst        |  39 +++++++
  .../bpf/prog_tests/bpf_verif_scale.c          |   1 +
  tools/testing/selftests/bpf/progs/loop6.c     | 101 ++++++++++++++++++
  3 files changed, 141 insertions(+)

create mode 100644 tools/testing/selftests/bpf/progs/loop6.c

tools/testing/selftests/bpf/README.rst +39 -0
index fd148b8410fa..dbc8f6cc5c67 100644
@@ -111,6 +111,45 @@ available in 10.0.1. The patch is available in llvm 11.0.0 trunk.
 
  __  https://reviews.llvm.org/D78466
 
+bpf_verif_scale/loop6.o test failure with Clang 12
+==================================================
+
+With Clang 12, the following bpf_verif_scale test failed:
+  * ``bpf_verif_scale/loop6.o``
+
+The verifier output looks like
+
+.. code-block:: c
+
+  R1 type=ctx expected=fp
+  The sequence of 8193 jumps is too complex.
+
+The reason is compiler generating the following code
+
+.. code-block:: c
+
+  ;       for (i = 0; (i < VIRTIO_MAX_SGS) && (i < num); i++) {
+      14:       16 05 40 00 00 00 00 00 if w5 == 0 goto +64 <LBB0_6>
+      15:       bc 51 00 00 00 00 00 00 w1 = w5
+      16:       04 01 00 00 ff ff ff ff w1 += -1
+      17:       67 05 00 00 20 00 00 00 r5 <<= 32
+      18:       77 05 00 00 20 00 00 00 r5 >>= 32
+      19:       a6 01 01 00 05 00 00 00 if w1 < 5 goto +1 <LBB0_4>
+      20:       b7 05 00 00 06 00 00 00 r5 = 6
+  00000000000000a8 <LBB0_4>:
+      21:       b7 02 00 00 00 00 00 00 r2 = 0
+      22:       b7 01 00 00 00 00 00 00 r1 = 0
+  ;       for (i = 0; (i < VIRTIO_MAX_SGS) && (i < num); i++) {
+      23:       7b 1a e0 ff 00 00 00 00 *(u64 *)(r10 - 32) = r1
+      24:       7b 5a c0 ff 00 00 00 00 *(u64 *)(r10 - 64) = r5
+
+Note that insn #15 has w1 = w5 and w1 is refined later but
+r5(w5) is eventually saved on stack at insn #24 for later use.
+This cause later verifier failure. The bug has been `fixed`__ in
+Clang 13.
+
+__  https://reviews.llvm.org/D97479
+
  BPF CO-RE-based tests and Clang version
  =======================================
 
tools/testing/selftests/bpf/prog_tests/bpf_verif_scale.c +1 -0
index e698ee6bb6c2..3d002c245d2b 100644
@@ -76,6 +76,7 @@ void test_bpf_verif_scale(void)
                 { "loop2.o", BPF_PROG_TYPE_RAW_TRACEPOINT },
                 { "loop4.o", BPF_PROG_TYPE_SCHED_CLS },
                 { "loop5.o", BPF_PROG_TYPE_SCHED_CLS },
+               { "loop6.o", BPF_PROG_TYPE_KPROBE },
 
                 /* partial unroll. 19k insn in a loop.
                  * Total program size 20.8k insn.
tools/testing/selftests/bpf/progs/loop6.c new file +33 -0
new file mode 100644
index 000000000000..fe535922bed8
@@ -0,0 +1,101 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <linux/ptrace.h>
+#include <stddef.h>
+#include <linux/bpf.h>
+#include <bpf/bpf_helpers.h>
+#include <bpf/bpf_tracing.h>
+
+char _license[] SEC("license") = "GPL";
+
+/* typically virtio scsi has max SGs of 6 */
+#define VIRTIO_MAX_SGS 6
+
+/* Verifier will fail with SG_MAX = 128. The failure can be
+ * workarounded with a smaller SG_MAX, e.g. 10.
+ */
+#define WORKAROUND
+#ifdef WORKAROUND
+#define SG_MAX         10
+#else
+/* typically virtio blk has max SEG of 128 */
+#define SG_MAX         128
+#endif
+
+#define SG_CHAIN       0x01UL
+#define SG_END         0x02UL
+
+struct scatterlist {
+       unsigned long   page_link;
+       unsigned int    offset;
+       unsigned int    length;
+};
+
Quoted 8 lines

tools/testing/selftests/bpf/progs/loop6.c line 39

Quoted 6 lines
tools/testing/selftests/bpf/progs/loop6.c new file +6 -0
+#define sg_is_chain(sg)                ((sg)->page_link & SG_CHAIN)
+#define sg_is_last(sg)         ((sg)->page_link & SG_END)
+#define sg_chain_ptr(sg)       \
+       ((struct scatterlist *) ((sg)->page_link & ~(SG_CHAIN | SG_END)))
+
+static inline struct scatterlist *__sg_next(struct scatterlist *sgp)

nit: here and below, it doesn't have to be inline, does it?

I will keep inline here. With __noinline, current loop6.c failed at verifier:
BPF program is too large. Processed 1000001 insn
This may be another issue we need to investigate later.

Quoted 27 lines
Quoted 27 lines
tools/testing/selftests/bpf/progs/loop6.c new file +26 -0
+{
+       struct scatterlist sg;
+
+       bpf_probe_read_kernel(&sg, sizeof(sg), sgp);
+       if (sg_is_last(&sg))
+               return NULL;
+
+       sgp++;
+
+       bpf_probe_read_kernel(&sg, sizeof(sg), sgp);
+       if (sg_is_chain(&sg))
+               sgp = sg_chain_ptr(&sg);
+
+       return sgp;
+}
+
+static inline struct scatterlist *get_sgp(struct scatterlist **sgs, int i)
+{
+       struct scatterlist *sgp;
+
+       bpf_probe_read_kernel(&sgp, sizeof(sgp), sgs + i);
+       return sgp;
+}
+
+int config = 0;
+int result = 0;
Quoted 8 lines

tools/testing/selftests/bpf/progs/loop6.c line 68

Quoted 3 lines
tools/testing/selftests/bpf/progs/loop6.c new file +3 -0
+
+SEC("kprobe/virtqueue_add_sgs")
+int nested_loops(volatile struct pt_regs* ctx)

libbpf provides BPF_KPROBE macro, similar to BPF_PROG for fentry/fexit. Can you please use that instead? You won't need PT_REGS_PARM macroses below, which will lead to nicer and shorter code.

Sure. Will use. Indeed better.

Quoted 37 lines
Quoted 37 lines
tools/testing/selftests/bpf/progs/loop6.c new file +33 -1
+{
+       struct scatterlist **sgs = PT_REGS_PARM2(ctx);
+       unsigned int num1 = PT_REGS_PARM3(ctx);
+       unsigned int num2 = PT_REGS_PARM4(ctx);
+       struct scatterlist *sgp = NULL;
+       __u64 length1 = 0, length2 = 0;
+       unsigned int i, n, len;
+
+       if (config != 0)
+               return 0;
+
+       for (i = 0; (i < VIRTIO_MAX_SGS) && (i < num1); i++) {
+               for (n = 0, sgp = get_sgp(sgs, i); sgp && (n < SG_MAX);
+                    sgp = __sg_next(sgp)) {
+                       bpf_probe_read_kernel(&len, sizeof(len), &sgp->length);
+                       length1 += len;
+                       n++;
+               }
+       }
+
+       for (i = 0; (i < VIRTIO_MAX_SGS) && (i < num2); i++) {
+               for (n = 0, sgp = get_sgp(sgs, i); sgp && (n < SG_MAX);
+                    sgp = __sg_next(sgp)) {
+                       bpf_probe_read_kernel(&len, sizeof(len), &sgp->length);
+                       length2 += len;
+                       n++;
+               }
+       }
+
+       config = 1;
+       result = length2 - length1;
+       return 0;
+}
--

2.24.1

#3 lore raw
Quoted 162 lines · Yonghong Song
Quoted 149 lines · Andrii Nakryiko
Quoted 148 lines · Yonghong Song

The orignal bcc pull request
https://github.com/iovisor/bcc/pull/3270
exposed a verifier failure with Clang 12/13 while
Clang 4 works fine. Further investigation exposed two issues.
Issue 1: LLVM may generate code which uses less refined
value. The issue is fixed in llvm patch
https://reviews.llvm.org/D97479
Issue 2: Spills with initial value 0 are marked as precise
which makes later state pruning less effective. This is my rough initial analysis and further investigation is needed to find how to improve verifier pruning in such cases.

With the above llvm patch, for the new loop6.c test, which has smaller loop bound compared to original test, I got

   $ test_progs -s -n 10/16
   ...
   stack depth 64
   processed 405099 insns (limit 1000000) max_states_per_insn 92
       total_states 8866 peak_states 889 mark_read 6
   #10/16 loop6.o:OK

Use the original loop bound, i.e., commenting out "#define WORKAROUND", I got

   $ test_progs -s -n 10/16
   ...
   BPF program is too large. Processed 1000001 insn
   stack depth 64
   processed 1000001 insns (limit 1000000) max_states_per_insn 91
       total_states 23176 peak_states 5069 mark_read 6
   ...
   #10/16 loop6.o:FAIL

The purpose of this patch is to provide a regression test for the above llvm fix and also provide a test case for further analyzing the verifier pruning issue.

---
  tools/testing/selftests/bpf/README.rst        |  39 +++++++
  .../bpf/prog_tests/bpf_verif_scale.c          |   1 +
  tools/testing/selftests/bpf/progs/loop6.c     | 101 ++++++++++++++++++
  3 files changed, 141 insertions(+)

create mode 100644 tools/testing/selftests/bpf/progs/loop6.c

tools/testing/selftests/bpf/README.rst +39 -0
index fd148b8410fa..dbc8f6cc5c67 100644
@@ -111,6 +111,45 @@ available in 10.0.1. The patch is available in llvm 11.0.0 trunk.
 
  __  https://reviews.llvm.org/D78466
 
+bpf_verif_scale/loop6.o test failure with Clang 12
+==================================================
+
+With Clang 12, the following bpf_verif_scale test failed:
+  * ``bpf_verif_scale/loop6.o``
+
+The verifier output looks like
+
+.. code-block:: c
+
+  R1 type=ctx expected=fp
+  The sequence of 8193 jumps is too complex.
+
+The reason is compiler generating the following code
+
+.. code-block:: c
+
+  ;       for (i = 0; (i < VIRTIO_MAX_SGS) && (i < num); i++) {
+      14:       16 05 40 00 00 00 00 00 if w5 == 0 goto +64 <LBB0_6>
+      15:       bc 51 00 00 00 00 00 00 w1 = w5
+      16:       04 01 00 00 ff ff ff ff w1 += -1
+      17:       67 05 00 00 20 00 00 00 r5 <<= 32
+      18:       77 05 00 00 20 00 00 00 r5 >>= 32
+      19:       a6 01 01 00 05 00 00 00 if w1 < 5 goto +1 <LBB0_4>
+      20:       b7 05 00 00 06 00 00 00 r5 = 6
+  00000000000000a8 <LBB0_4>:
+      21:       b7 02 00 00 00 00 00 00 r2 = 0
+      22:       b7 01 00 00 00 00 00 00 r1 = 0
+  ;       for (i = 0; (i < VIRTIO_MAX_SGS) && (i < num); i++) {
+      23:       7b 1a e0 ff 00 00 00 00 *(u64 *)(r10 - 32) = r1
+      24:       7b 5a c0 ff 00 00 00 00 *(u64 *)(r10 - 64) = r5
+
+Note that insn #15 has w1 = w5 and w1 is refined later but
+r5(w5) is eventually saved on stack at insn #24 for later use.
+This cause later verifier failure. The bug has been `fixed`__ in
+Clang 13.
+
+__  https://reviews.llvm.org/D97479
+
  BPF CO-RE-based tests and Clang version
  =======================================
 
tools/testing/selftests/bpf/prog_tests/bpf_verif_scale.c +1 -0
index e698ee6bb6c2..3d002c245d2b 100644
@@ -76,6 +76,7 @@ void test_bpf_verif_scale(void)
                 { "loop2.o", BPF_PROG_TYPE_RAW_TRACEPOINT },
                 { "loop4.o", BPF_PROG_TYPE_SCHED_CLS },
                 { "loop5.o", BPF_PROG_TYPE_SCHED_CLS },
+               { "loop6.o", BPF_PROG_TYPE_KPROBE },
 
                 /* partial unroll. 19k insn in a loop.
                  * Total program size 20.8k insn.
tools/testing/selftests/bpf/progs/loop6.c new file +33 -0
new file mode 100644
index 000000000000..fe535922bed8
@@ -0,0 +1,101 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <linux/ptrace.h>
+#include <stddef.h>
+#include <linux/bpf.h>
+#include <bpf/bpf_helpers.h>
+#include <bpf/bpf_tracing.h>
+
+char _license[] SEC("license") = "GPL";
+
+/* typically virtio scsi has max SGs of 6 */
+#define VIRTIO_MAX_SGS 6
+
+/* Verifier will fail with SG_MAX = 128. The failure can be
+ * workarounded with a smaller SG_MAX, e.g. 10.
+ */
+#define WORKAROUND
+#ifdef WORKAROUND
+#define SG_MAX         10
+#else
+/* typically virtio blk has max SEG of 128 */
+#define SG_MAX         128
+#endif
+
+#define SG_CHAIN       0x01UL
+#define SG_END         0x02UL
+
+struct scatterlist {
+       unsigned long   page_link;
+       unsigned int    offset;
+       unsigned int    length;
+};
+
Quoted 8 lines

tools/testing/selftests/bpf/progs/loop6.c line 39

Quoted 6 lines
tools/testing/selftests/bpf/progs/loop6.c new file +6 -0
+#define sg_is_chain(sg)                ((sg)->page_link & SG_CHAIN)
+#define sg_is_last(sg)         ((sg)->page_link & SG_END)
+#define sg_chain_ptr(sg)       \
+       ((struct scatterlist *) ((sg)->page_link & ~(SG_CHAIN | SG_END)))
+
+static inline struct scatterlist *__sg_next(struct scatterlist *sgp)

nit: here and below, it doesn't have to be inline, does it?

Quoted 5 lines

I will keep inline here. With __noinline, current loop6.c failed at verifier:
BPF program is too large. Processed 1000001 insn
This may be another issue we need to investigate later.

sure, no worries. At least we learned something new :)

Quoted 75 lines
Quoted 27 lines
Quoted 27 lines
tools/testing/selftests/bpf/progs/loop6.c new file +26 -0
+{
+       struct scatterlist sg;
+
+       bpf_probe_read_kernel(&sg, sizeof(sg), sgp);
+       if (sg_is_last(&sg))
+               return NULL;
+
+       sgp++;
+
+       bpf_probe_read_kernel(&sg, sizeof(sg), sgp);
+       if (sg_is_chain(&sg))
+               sgp = sg_chain_ptr(&sg);
+
+       return sgp;
+}
+
+static inline struct scatterlist *get_sgp(struct scatterlist **sgs, int i)
+{
+       struct scatterlist *sgp;
+
+       bpf_probe_read_kernel(&sgp, sizeof(sgp), sgs + i);
+       return sgp;
+}
+
+int config = 0;
+int result = 0;
Quoted 8 lines

tools/testing/selftests/bpf/progs/loop6.c line 68

Quoted 3 lines
tools/testing/selftests/bpf/progs/loop6.c new file +3 -0
+
+SEC("kprobe/virtqueue_add_sgs")
+int nested_loops(volatile struct pt_regs* ctx)

libbpf provides BPF_KPROBE macro, similar to BPF_PROG for fentry/fexit. Can you please use that instead? You won't need PT_REGS_PARM macroses below, which will lead to nicer and shorter code.

Sure. Will use. Indeed better.

Quoted 37 lines
Quoted 37 lines
tools/testing/selftests/bpf/progs/loop6.c new file +33 -1
+{
+       struct scatterlist **sgs = PT_REGS_PARM2(ctx);
+       unsigned int num1 = PT_REGS_PARM3(ctx);
+       unsigned int num2 = PT_REGS_PARM4(ctx);
+       struct scatterlist *sgp = NULL;
+       __u64 length1 = 0, length2 = 0;
+       unsigned int i, n, len;
+
+       if (config != 0)
+               return 0;
+
+       for (i = 0; (i < VIRTIO_MAX_SGS) && (i < num1); i++) {
+               for (n = 0, sgp = get_sgp(sgs, i); sgp && (n < SG_MAX);
+                    sgp = __sg_next(sgp)) {
+                       bpf_probe_read_kernel(&len, sizeof(len), &sgp->length);
+                       length1 += len;
+                       n++;
+               }
+       }
+
+       for (i = 0; (i < VIRTIO_MAX_SGS) && (i < num2); i++) {
+               for (n = 0, sgp = get_sgp(sgs, i); sgp && (n < SG_MAX);
+                    sgp = __sg_next(sgp)) {
+                       bpf_probe_read_kernel(&len, sizeof(len), &sgp->length);
+                       length2 += len;
+                       n++;
+               }
+       }
+
+       config = 1;
+       result = length2 - length1;
+       return 0;
+}
--

2.24.1