pinephone_defconfig: reduce boot delay
Subsystems (3)
PATCH 2/4 pinephone_defconfig: reduce boot delay
From: Arnaud Ferraris <[email protected]>
On a cellular phone, the vast majority of users can be expected to have no serial console connected and prefer a short boot.
--- configs/pinephone_defconfig | 1 + 1 file changed, 1 insertion(+)
configs/pinephone_defconfig +1 -0
@@ -10,4 +10,5 @@ CONFIG_PINEPHONE_DT_SELECTION=y CONFIG_DEFAULT_DEVICE_TREE="sun50i-a64-pinephone-1.2" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_BOOTDELAY=0 CONFIG_OF_LIST="sun50i-a64-pinephone-1.1 sun50i-a64-pinephone-1.2"
Signature · 1 line
2.20.1
PATCH 20/20 Enable led on boot to notify user of boot status
From: Marius Gripsgard <[email protected]>
--- arch/arm/mach-sunxi/Kconfig | 5 +++++ board/sunxi/board.c | 4 ++-- configs/pinephone_defconfig | 1 + 3 files changed, 8 insertions(+), 2 deletions(-)
arch/arm/mach-sunxi/Kconfig +5 -0
@@ -1,5 +1,10 @@ if ARCH_SUNXI +config PINEPHONE_LEDS + bool "Notify boot status via LEDs on PinePhone" + ---help--- + LED boot notification. + config SPL_LDSCRIPT default "arch/arm/cpu/armv7/sunxi/u-boot-spl.lds" if !ARM64
board/sunxi/board.c +6 -0
@@ -637,6 +638,12 @@ void sunxi_board_init(void) {int power_failed =0 ; +#ifdef CONFIG_PINEPHONE_LEDS +/* PD18:G PD19:R PD20:B */ +gpio_request (SUNXI_GPD (18 ),"led:green" ); +gpio_direction_output (SUNXI_GPD (18 ),1 ); +#endif +#ifdef CONFIG_SY8106A_POWER power_failed =sy8106a_set_vout1 (CONFIG_SY8106A_VOUT1_VOLT );#endif
configs/pinephone_defconfig +1 -0
@@ -1,6 +21,7 @@ CONFIG_ARM=y CONFIG_ARCH_SUNXI=y CONFIG_SPL=y +CONFIG_PINEPHONE_LEDS=y CONFIG_MACH_SUN50I=y CONFIG_SUNXI_DRAM_LPDDR3_STOCK=y CONFIG_DRAM_CLK=552
Signature · 1 line
2.26.2
PATCH 20/20 Enable led on boot to notify user of boot status
Quoted 1 line · Nicolas Boulenguez
From: Marius Gripsgard <[email protected]>
Hi,
This is not really Pinephone specific, actually not even sunxi specific. I see two better ways of solving this:
- We introduce some generic code to find "gpio-leds" subnodes in the DT, which have a default-state = "on" property. This could be either added to drivers/led/led_gpio.c, or in some higher level.
- We introduce a generic boot LED GPIO config symbol. Maybe there is already something, that sounds like a generally useful feature? That would have the advantage of being already enabled in the SPL (admittedly a sunxi specific problem).
Any opinions?
Cheers,
Andre
Quoted 51 lines
--- arch/arm/mach-sunxi/Kconfig | 5 +++++ board/sunxi/board.c | 4 ++-- configs/pinephone_defconfig | 1 + 3 files changed, 8 insertions(+), 2 deletions(-)arch/arm/mach-sunxi/Kconfig +5
-0@@ -1,5 +1,10 @@ if ARCH_SUNXI +config PINEPHONE_LEDS + bool "Notify boot status via LEDs on PinePhone" + ---help--- + LED boot notification. + config SPL_LDSCRIPT default "arch/arm/cpu/armv7/sunxi/u-boot-spl.lds" if !ARM64board/sunxi/board.c +6
-0@@ -637,6 +638,12 @@ void sunxi_board_init(void) {int power_failed =0 ; +#ifdef CONFIG_PINEPHONE_LEDS +/* PD18:G PD19:R PD20:B */ +gpio_request (SUNXI_GPD (18 ),"led:green" ); +gpio_direction_output (SUNXI_GPD (18 ),1 ); +#endif +#ifdef CONFIG_SY8106A_POWER power_failed =sy8106a_set_vout1 (CONFIG_SY8106A_VOUT1_VOLT );#endif configs/pinephone_defconfig +1
-0@@ -1,6 +21,7 @@ CONFIG_ARM=y CONFIG_ARCH_SUNXI=y CONFIG_SPL=y +CONFIG_PINEPHONE_LEDS=y CONFIG_MACH_SUN50I=y CONFIG_SUNXI_DRAM_LPDDR3_STOCK=y CONFIG_DRAM_CLK=552
PATCH 20/20 Enable led on boot to notify user of boot status
Quoted 13 lines · Andr? Przywara
Quoted 1 line · Nicolas Boulenguez
From: Marius Gripsgard <[email protected]>
Hi,
This is not really Pinephone specific, actually not even sunxi specific. I see two better ways of solving this:
- We introduce some generic code to find "gpio-leds" subnodes in the DT, which have a default-state = "on" property. This could be either added to
drivers/led/led_gpio.c, or in some higher level.
Quoted 6 lines
- We introduce a generic boot LED GPIO config symbol. Maybe there is already something, that sounds like a generally useful feature? That would have the advantage of being already enabled in the SPL (admittedly a sunxi specific problem).
Any opinions?
I believe there's already a way to use LEDs for status during the boot process using the CONFIG_LED_STATUS selection of config options. A grep of the defconfig already shows a number of boards using this. I wonder why the already existing infrastructure isn't useful.
Peter
Quoted 55 lines
Cheers,
AndreQuoted 51 lines
--- arch/arm/mach-sunxi/Kconfig | 5 +++++ board/sunxi/board.c | 4 ++-- configs/pinephone_defconfig | 1 + 3 files changed, 8 insertions(+), 2 deletions(-)arch/arm/mach-sunxi/Kconfig +5
-0@@ -1,5 +1,10 @@ if ARCH_SUNXI +config PINEPHONE_LEDS + bool "Notify boot status via LEDs on PinePhone" + ---help--- + LED boot notification. + config SPL_LDSCRIPT default "arch/arm/cpu/armv7/sunxi/u-boot-spl.lds" if !ARM64board/sunxi/board.c +6
-0@@ -637,6 +638,12 @@ void sunxi_board_init(void) {int power_failed =0 ; +#ifdef CONFIG_PINEPHONE_LEDS +/* PD18:G PD19:R PD20:B */ +gpio_request (SUNXI_GPD (18 ),"led:green" ); +gpio_direction_output (SUNXI_GPD (18 ),1 ); +#endif +#ifdef CONFIG_SY8106A_POWER power_failed =sy8106a_set_vout1 (CONFIG_SY8106A_VOUT1_VOLT );#endif configs/pinephone_defconfig +1
-0@@ -1,6 +21,7 @@ CONFIG_ARM=y CONFIG_ARCH_SUNXI=y CONFIG_SPL=y +CONFIG_PINEPHONE_LEDS=y CONFIG_MACH_SUN50I=y CONFIG_SUNXI_DRAM_LPDDR3_STOCK=y CONFIG_DRAM_CLK=552
PATCH 1/1 sunxi: support asymmetric dual rank DRAM on A64/R40
In reply to Nicolas BoulenguezFrom: Icenowy Zheng <[email protected]>
Previously we have known that R40 has a configuration register for its rank 1, which allows different configuration than rank 0. Reverse engineering of newest libdram of A64 from Allwinner shows that A64 has this register too. It's bit 0 (which enables dual rank in rank 0 configuration register) means a dedicated rank size setup is used for rank 1.
Now, Pine64 scheduled to use a 3GiB LPDDR3 DRAM chip (which has 2GiB rank 0 and 1GiB rank 1) on PinePhone, that makes asymmetric dual rank DRAM support necessary.
Add this support. As we have gained knowledge of asymmetric dual rank, we can now allow R40 dual rank memory setup to work too.
--- .../include/asm/arch-sunxi/dram_sunxi_dw.h | 11 +- arch/arm/mach-sunxi/dram_sunxi_dw.c | 100 +++++++++++++----- 2 files changed, 84 insertions(+), 27 deletions(-)
arch/arm/include/asm/arch-sunxi/dram_sunxi_dw.h +8 -3
@@ -215,12 +215,17 @@ struct sunxi_mctl_ctl_reg {#define NR_OF_BYTE_LANES (32 / BITS_PER_BYTE)/* The eight data lines (DQn) plus DM, DQS and DQSN */ #define LINES_PER_BYTE_LANE (BITS_PER_BYTE + 3) -struct dram_para { + +struct rank_para {u16 page_size; -u8 bus_full_width; -u8 dual_rank;u8 row_bits;u8 bank_bits; +}; + +struct dram_para { +u8 dual_rank; +u8 bus_full_width; +struct rank_para ranks[2 ];const u8 dx_read_delays[NR_OF_BYTE_LANES ][LINES_PER_BYTE_LANE ];const u8 dx_write_delays[NR_OF_BYTE_LANES ][LINES_PER_BYTE_LANE ];const u8 ac_delays[31 ];
arch/arm/mach-sunxi/dram_sunxi_dw.c +76 -24
147 lines not on this page · raw message
Signature · 1 line
2.27.0
PATCH 1/1 sunxi: support asymmetric dual rank DRAM on A64/R40
On 20/02/2021 12:14, Nicolas Boulenguez wrote:
Hi,
Quoted 9 lines
From: Icenowy Zheng <[email protected]>
Previously we have known that R40 has a configuration register for its rank 1, which allows different configuration than rank 0. Reverse engineering of newest libdram of A64 from Allwinner shows that A64 has this register too. It's bit 0 (which enables dual rank in rank 0 configuration register) means a dedicated rank size setup is used for rank 1.
Quoted 6 lines
Now, Pine64 scheduled to use a 3GiB LPDDR3 DRAM chip (which has 2GiB rank 0 and 1GiB rank 1) on PinePhone, that makes asymmetric dual rank DRAM support necessary.
Add this support. As we have gained knowledge of asymmetric dual rank, we can now allow R40 dual rank memory setup to work too.
Icenowy just sent a new version, together with another patch. I will review her version, so you can drop this one here.
Cheers,
Andre
Quoted 188 lines
Signed-off-by Icenowy Zheng <[email protected]>--- .../include/asm/arch-sunxi/dram_sunxi_dw.h | 11 +- arch/arm/mach-sunxi/dram_sunxi_dw.c | 100 +++++++++++++----- 2 files changed, 84 insertions(+), 27 deletions(-)arch/arm/include/asm/arch-sunxi/dram_sunxi_dw.h +8
-3@@ -215,12 +215,17 @@ struct sunxi_mctl_ctl_reg {#define NR_OF_BYTE_LANES (32 / BITS_PER_BYTE)/* The eight data lines (DQn) plus DM, DQS and DQSN */ #define LINES_PER_BYTE_LANE (BITS_PER_BYTE + 3) -struct dram_para { + +struct rank_para {u16 page_size; -u8 bus_full_width; -u8 dual_rank;u8 row_bits;u8 bank_bits; +}; + +struct dram_para { +u8 dual_rank; +u8 bus_full_width; +struct rank_para ranks[2 ];const u8 dx_read_delays[NR_OF_BYTE_LANES ][LINES_PER_BYTE_LANE ];const u8 dx_write_delays[NR_OF_BYTE_LANES ][LINES_PER_BYTE_LANE ];const u8 ac_delays[31 ];arch/arm/mach-sunxi/dram_sunxi_dw.c +76
-24@@ -346,18 +346,24 @@ static void mctl_set_cr(uint16_t socid, struct dram_para *para)#else #error Unsupported DRAM type!#endif - (para->bank_bits ==3 ?MCTL_CR_EIGHT_BANKS :MCTL_CR_FOUR_BANKS ) | + (para->ranks[0 ].bank_bits ==3 ?MCTL_CR_EIGHT_BANKS :MCTL_CR_FOUR_BANKS ) |MCTL_CR_BUS_FULL_WIDTH (para->bus_full_width) | (para->dual_rank ?MCTL_CR_DUAL_RANK :MCTL_CR_SINGLE_RANK ) | -MCTL_CR_PAGE_SIZE (para->page_size) | - MCTL_CR_ROW_BITS(para->row_bits), &mctl_com->cr); +MCTL_CR_PAGE_SIZE (para->ranks[0 ].page_size) | + MCTL_CR_ROW_BITS(para->ranks[0].row_bits), &mctl_com->cr); -if (socid ==SOCID_R40 ) { -if (para->dual_rank) -panic ("Dual rank memory not supported\n" ); +if (socid ==SOCID_A64 || socid ==SOCID_R40 ) { +writel ((para->ranks[1 ].bank_bits ==3 ?MCTL_CR_EIGHT_BANKS :MCTL_CR_FOUR_BANKS ) | +MCTL_CR_BUS_FULL_WIDTH (para->bus_full_width) | + (para->dual_rank ?MCTL_CR_DUAL_RANK :MCTL_CR_SINGLE_RANK ) | +MCTL_CR_PAGE_SIZE (para->ranks[1 ].page_size) | +MCTL_CR_ROW_BITS (para->ranks[1 ].row_bits), &mctl_com->cr_r1); + } +if (socid ==SOCID_R40 ) {/* Mux pin to A15 address line for single rank memory. */ -setbits_le32 (&mctl_com->cr_r1,MCTL_CR_R1_MUX_A15 ); +if (!para->dual_rank) +setbits_le32 (&mctl_com->cr_r1,MCTL_CR_R1_MUX_A15 ); } }@@ -581,35 +587,63 @@ static int mctl_channel_init(uint16_t socid, struct dram_para *para)return 0 ; } -static void mctl_auto_detect_dram_size (uint16_t socid,struct dram_para *para) +/* +* Test if memory at offset offset matches memory at a certain base +*/ +static bool mctl_mem_matches_base (u32 offset,ulong base) +{ +/* Try to write different values to RAM at two addresses */ +writel (0 , base); +writel (0xaa55aa55 , base + offset); +dsb (); +/* Check if the same value is actually observed when reading back */ +return readl (base) == +readl (base + offset); +} + +static void mctl_auto_detect_dram_size_rank (uint16_t socid,struct dram_para *para,ulong base,struct rank_para *rank) {/* detect row address bits */ - para->page_size =512 ; - para->row_bits =16 ; - para->bank_bits =2 ; + rank->page_size =512 ; + rank->row_bits =16 ; + rank->bank_bits =2 ;mctl_set_cr (socid, para); -for (para->row_bits =11 ; para->row_bits <16 ; para->row_bits++) -if (mctl_mem_matches ((1 << (para->row_bits + para->bank_bits)) * para->page_size)) +for (rank->row_bits =11 ; rank->row_bits <16 ; rank->row_bits++) +if (mctl_mem_matches_base ((1 << (rank->row_bits + rank->bank_bits)) * rank->page_size, base))break ;/* detect bank address bits */ - para->bank_bits =3 ; + rank->bank_bits =3 ;mctl_set_cr (socid, para); -for (para->bank_bits =2 ; para->bank_bits <3 ; para->bank_bits++) -if (mctl_mem_matches ((1 << para->bank_bits) * para->page_size)) +for (rank->bank_bits =2 ; rank->bank_bits <3 ; rank->bank_bits++) +if (mctl_mem_matches_base ((1 << rank->bank_bits) * rank->page_size, base))break ;/* detect page size */ - para->page_size =8192 ; + rank->page_size =8192 ;mctl_set_cr (socid, para); -for (para->page_size =512 ; para->page_size <8192 ; para->page_size *=2 ) -if (mctl_mem_matches (para->page_size)) +for (rank->page_size =512 ; rank->page_size <8192 ; rank->page_size *=2 ) +if (mctl_mem_matches_base (rank->page_size, base))break ; } +static unsigned long mctl_calc_rank_size (struct rank_para *rank) +{ +return (1UL << (rank->row_bits + rank->bank_bits)) * rank->page_size; +} + +static void mctl_auto_detect_dram_size (uint16_t socid,struct dram_para *para) +{ +mctl_auto_detect_dram_size_rank (socid, para, (ulong )CONFIG_SYS_SDRAM_BASE , ¶->ranks[0 ]); + +if ((socid ==SOCID_A64 || socid ==SOCID_R40 ) && para->dual_rank) { +mctl_auto_detect_dram_size_rank (socid, para, (ulong )CONFIG_SYS_SDRAM_BASE +mctl_calc_rank_size (¶->ranks[0 ]), ¶->ranks[1 ]); + } +} +/* * The actual values used here are taken from Allwinner provided boot0 * binaries, though they are probably board specific, so would likely benefit @@ -688,12 +722,23 @@ unsigned long sunxi_dram_init(void)struct sunxi_mctl_ctl_reg *const mctl_ctl = (struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE ; +unsigned long size; +struct dram_para para = { .dual_rank =1 , .bus_full_width =1 , - .row_bits =15 , - .bank_bits =3 , - .page_size =4096 , + .ranks = { + { + .row_bits =15 , + .bank_bits =3 , + .page_size =4096 , + }, + { + .row_bits =15 , + .bank_bits =3 , + .page_size =4096 , + } + }, #if defined(CONFIG_MACH_SUN8I_H3) .dx_read_delays = SUN8I_H3_DX_READ_DELAYS,@@ -762,6 +807,13 @@ unsigned long sunxi_dram_init(void)mctl_auto_detect_dram_size (socid, ¶);mctl_set_cr (socid, ¶); -return (1UL << (para.row_bits + para.bank_bits)) * para.page_size * - (para.dual_rank ?2 :1 ); + size =mctl_calc_rank_size (¶.ranks[0 ]); +if (socid ==SOCID_A64 || socid ==SOCID_R40 ) { +if (para.dual_rank) + size +=mctl_calc_rank_size (¶.ranks[1 ]); + }else if (para.dual_rank) { + size *=2 ; + } + +return size; }
PATCH 1/1 sunxi-common: support loading compressed kernel images on ARMv8
In reply to Nicolas BoulenguezFrom: Arnaud Ferraris <[email protected]>
--- include/configs/sunxi-common.h | 15 +++++++++++++++ 1 file changed, 15 insertions(+)
include/configs/sunxi-common.h +15 -0
@@ -291,6 +291,8 @@ extern int soft_i2c_gpio_scl;*/ #define BOOTM_SIZE __stringify(0xa000000)#define KERNEL_ADDR_R __stringify(SDRAM_OFFSET(0080000)) +#define KERNEL_COMP_ADDR_R __stringify(SDRAM_OFFSET(4000000)) +#define KERNEL_COMP_SIZE __stringify(0x4000000)#define FDT_ADDR_R __stringify(SDRAM_OFFSET(FA00000))#define SCRIPT_ADDR_R __stringify(SDRAM_OFFSET(FC00000))#define PXEFILE_ADDR_R __stringify(SDRAM_OFFSET(FD00000))
@@ -332,6 +334,18 @@ extern int soft_i2c_gpio_scl;"pxefile_addr_r=" PXEFILE_ADDR_R "\0" \ "ramdisk_addr_r=" RAMDISK_ADDR_R "\0" +#ifdef CONFIG_ARM64 + +#define MEM_LAYOUT_ENV_EXTRA_SETTINGS \ + "kernel_comp_addr_r=" KERNEL_COMP_ADDR_R "\0" \ + "kernel_comp_size=" KERNEL_COMP_SIZE "\0" + +#else + +#define MEM_LAYOUT_ENV_EXTRA_SETTINGS "" + +#endif +#define DFU_ALT_INFO_RAM \ "dfu_alt_info_ram=" \ "kernel ram " KERNEL_ADDR_R " 0x1000000;" \
@@ -487,6 +501,7 @@ extern int soft_i2c_gpio_scl;#define CONFIG_EXTRA_ENV_SETTINGS \ CONSOLE_ENV_SETTINGS \ MEM_LAYOUT_ENV_SETTINGS \ + MEM_LAYOUT_ENV_EXTRA_SETTINGS \ DFU_ALT_INFO_RAM \ "fdtfile=" FDTFILE "\0" \ "console=ttyS0,115200\0" \
Signature · 1 line
2.28.0
PATCH 1/1 sunxi-common: support loading compressed kernel images on ARMv8
On 20/02/2021 12:14, Nicolas Boulenguez wrote:
Hi,
Quoted 1 line
From: Arnaud Ferraris <[email protected]>
This looks OK on the first glance, but is missing a commit message and a Signed-off-by:
Cheers,
Andre
Quoted 46 lines
--- include/configs/sunxi-common.h | 15 +++++++++++++++ 1 file changed, 15 insertions(+)include/configs/sunxi-common.h +15
-0@@ -291,6 +291,8 @@ extern int soft_i2c_gpio_scl;*/ #define BOOTM_SIZE __stringify(0xa000000)#define KERNEL_ADDR_R __stringify(SDRAM_OFFSET(0080000)) +#define KERNEL_COMP_ADDR_R __stringify(SDRAM_OFFSET(4000000)) +#define KERNEL_COMP_SIZE __stringify(0x4000000)#define FDT_ADDR_R __stringify(SDRAM_OFFSET(FA00000))#define SCRIPT_ADDR_R __stringify(SDRAM_OFFSET(FC00000))#define PXEFILE_ADDR_R __stringify(SDRAM_OFFSET(FD00000))@@ -332,6 +334,18 @@ extern int soft_i2c_gpio_scl;"pxefile_addr_r=" PXEFILE_ADDR_R "\0" \ "ramdisk_addr_r=" RAMDISK_ADDR_R "\0" +#ifdef CONFIG_ARM64 + +#define MEM_LAYOUT_ENV_EXTRA_SETTINGS \ + "kernel_comp_addr_r=" KERNEL_COMP_ADDR_R "\0" \ + "kernel_comp_size=" KERNEL_COMP_SIZE "\0" + +#else + +#define MEM_LAYOUT_ENV_EXTRA_SETTINGS "" + +#endif +#define DFU_ALT_INFO_RAM \ "dfu_alt_info_ram=" \ "kernel ram " KERNEL_ADDR_R " 0x1000000;" \@@ -487,6 +501,7 @@ extern int soft_i2c_gpio_scl;#define CONFIG_EXTRA_ENV_SETTINGS \ CONSOLE_ENV_SETTINGS \ MEM_LAYOUT_ENV_SETTINGS \ + MEM_LAYOUT_ENV_EXTRA_SETTINGS \ DFU_ALT_INFO_RAM \ "fdtfile=" FDTFILE "\0" \ "console=ttyS0,115200\0" \
PATCH 1/1 sunxi-common: support loading compressed kernel images on ARMv8
In reply to Nicolas BoulenguezOn 20/02/2021 12:14, Nicolas Boulenguez wrote:
Hi Arnaud,
Quoted 1 line
From: Arnaud Ferraris <[email protected]>
as mentioned before, this looks useful, so can you re-send this with a commit message and your Signed-off-by:?
Also I was wondering if you could increase the COMP_SIZE? The 64MB look rather arbitrary and maybe unnecessarily limiting. I think we could go up till 0xfa00000, but maybe should stop at 0xf800000, to leave some space for further extensions?
Cheers,
Andre
Quoted 46 lines
--- include/configs/sunxi-common.h | 15 +++++++++++++++ 1 file changed, 15 insertions(+)include/configs/sunxi-common.h +15
-0@@ -291,6 +291,8 @@ extern int soft_i2c_gpio_scl;*/ #define BOOTM_SIZE __stringify(0xa000000)#define KERNEL_ADDR_R __stringify(SDRAM_OFFSET(0080000)) +#define KERNEL_COMP_ADDR_R __stringify(SDRAM_OFFSET(4000000)) +#define KERNEL_COMP_SIZE __stringify(0x4000000)#define FDT_ADDR_R __stringify(SDRAM_OFFSET(FA00000))#define SCRIPT_ADDR_R __stringify(SDRAM_OFFSET(FC00000))#define PXEFILE_ADDR_R __stringify(SDRAM_OFFSET(FD00000))@@ -332,6 +334,18 @@ extern int soft_i2c_gpio_scl;"pxefile_addr_r=" PXEFILE_ADDR_R "\0" \ "ramdisk_addr_r=" RAMDISK_ADDR_R "\0" +#ifdef CONFIG_ARM64 + +#define MEM_LAYOUT_ENV_EXTRA_SETTINGS \ + "kernel_comp_addr_r=" KERNEL_COMP_ADDR_R "\0" \ + "kernel_comp_size=" KERNEL_COMP_SIZE "\0" + +#else + +#define MEM_LAYOUT_ENV_EXTRA_SETTINGS "" + +#endif +#define DFU_ALT_INFO_RAM \ "dfu_alt_info_ram=" \ "kernel ram " KERNEL_ADDR_R " 0x1000000;" \@@ -487,6 +501,7 @@ extern int soft_i2c_gpio_scl;#define CONFIG_EXTRA_ENV_SETTINGS \ CONSOLE_ENV_SETTINGS \ MEM_LAYOUT_ENV_SETTINGS \ + MEM_LAYOUT_ENV_EXTRA_SETTINGS \ DFU_ALT_INFO_RAM \ "fdtfile=" FDTFILE "\0" \ "console=ttyS0,115200\0" \
Samuel Holland
maintainerPATCH 1/1 sunxi-common: support loading compressed kernel images on ARMv8
Andre,
Quoted 8 lines · Andre Przywara
On 20/02/2021 12:14, Nicolas Boulenguez wrote:
Hi Arnaud,
Quoted 1 line
From: Arnaud Ferraris <[email protected]>
as mentioned before, this looks useful, so can you re-send this with a commit message and your Signed-off-by:?
It looks like you picked up this patch regardless?
Quoted 4 lines
Also I was wondering if you could increase the
COMP_SIZE? The 64MB look rather arbitrary and maybe unnecessarily limiting. I think we could go up till0xfa00000, but maybe should stop at0xf800000, to leave some space for further extensions?
And you changed KERNEL_COMP_SIZE to 0xb000000. How does that work when U-Boot itself is at 0x4a000000 (KERNEL_COMP_ADDR_R + 0x6000000)?
Samuel
Quoted 25 lines
Cheers,
AndreQuoted 22 lines
--- include/configs/sunxi-common.h | 15 +++++++++++++++ 1 file changed, 15 insertions(+)include/configs/sunxi-common.h +2
-0@@ -291,6 +291,8 @@ extern int soft_i2c_gpio_scl;*/ #define BOOTM_SIZE __stringify(0xa000000)#define KERNEL_ADDR_R __stringify(SDRAM_OFFSET(0080000)) +#define KERNEL_COMP_ADDR_R __stringify(SDRAM_OFFSET(4000000)) +#define KERNEL_COMP_SIZE __stringify(0x4000000)#define FDT_ADDR_R __stringify(SDRAM_OFFSET(FA00000))#define SCRIPT_ADDR_R __stringify(SDRAM_OFFSET(FC00000))#define PXEFILE_ADDR_R __stringify(SDRAM_OFFSET(FD00000))@@ -332,6 +334,18 @@ extern int soft_i2c_gpio_scl;"pxefile_addr_r=" PXEFILE_ADDR_R "\0" \"ramdisk_addr_r=" RAMDISK_ADDR_R "\0"
Quoted 9 lines
include/configs/sunxi-common.h extern int soft_i2c_gpio_scl; · line 345
Quoted 9 lines
include/configs/sunxi-common.h +9
-0+#ifdef CONFIG_ARM64 + +#define MEM_LAYOUT_ENV_EXTRA_SETTINGS \ + "kernel_comp_addr_r=" KERNEL_COMP_ADDR_R "\0" \ + "kernel_comp_size=" KERNEL_COMP_SIZE "\0" + +#else + +#define MEM_LAYOUT_ENV_EXTRA_SETTINGS ""
This can be defined to nothing. No empty string is needed.
Quoted 16 lines
Quoted 15 lines
include/configs/sunxi-common.h +4
-0+ +#endif +#define DFU_ALT_INFO_RAM \ "dfu_alt_info_ram=" \ "kernel ram " KERNEL_ADDR_R " 0x1000000;" \@@ -487,6 +501,7 @@ extern int soft_i2c_gpio_scl;#define CONFIG_EXTRA_ENV_SETTINGS \ CONSOLE_ENV_SETTINGS \ MEM_LAYOUT_ENV_SETTINGS \ + MEM_LAYOUT_ENV_EXTRA_SETTINGS \ DFU_ALT_INFO_RAM \ "fdtfile=" FDTFILE "\0" \ "console=ttyS0,115200\0" \
PATCH 1/1 sunxi-common: support loading compressed kernel images on ARMv8
On Sat, 17 Apr 2021 12:47:23 -0500
Samuel Holland <[email protected]> wrote:
Hi Samuel,
Quoted 11 lines · Andre Przywara
Quoted 8 lines · Nicolas Boulenguez
Hi Arnaud,
Quoted 1 line
From: Arnaud Ferraris <[email protected]>
as mentioned before, this looks useful, so can you re-send this with a commit message and your Signed-off-by:?
It looks like you picked up this patch regardless?
Yes, I asked him twice, without any reply. At the end I figured that the danger of a copyright infringement is low given the nature of the change, and I didn't feel this should block this useful feature. The alternative would be to have sent it as a patch of mine, but I felt that I should preserve his authorship, so took the patch anyway. I got a reply from him on another patch, and it's not his first U-Boot patch, so I think it's just an oversight (from the sender of the patch?)
Chen-Yu asked about the feature lately, so if you think that approach is dodgy, we can revert it and take another version of the patch.
Quoted 7 lines
Quoted 4 lines
Also I was wondering if you could increase the
COMP_SIZE? The 64MB look rather arbitrary and maybe unnecessarily limiting. I think we could go up till0xfa00000, but maybe should stop at0xf800000, to leave some space for further extensions?And you changed
KERNEL_COMP_SIZEto0xb000000. How does that work when U-Boot itself is at0x4a000000(KERNEL_COMP_ADDR_R+0x6000000)?
It's not anymore at this time, that's just the load address, and it relocates itself to the end of DRAM very early. So basically the whole memory except the very end is available.
Btw, the reason we confine everything to below 0x50000000 is just that we need to concatenate the base (0x4....) with that offset, and cannot use arithmetic, because that doesn't work in the Makefiles.
Cheers,
Andre
Quoted 50 lines
Quoted 21 lines
Quoted 21 lines
--- include/configs/sunxi-common.h | 15 +++++++++++++++ 1 file changed, 15 insertions(+)include/configs/sunxi-common.h +2
-0@@ -291,6 +291,8 @@ extern int soft_i2c_gpio_scl;*/ #define BOOTM_SIZE __stringify(0xa000000)#define KERNEL_ADDR_R __stringify(SDRAM_OFFSET(0080000)) +#define KERNEL_COMP_ADDR_R __stringify(SDRAM_OFFSET(4000000)) +#define KERNEL_COMP_SIZE __stringify(0x4000000)#define FDT_ADDR_R __stringify(SDRAM_OFFSET(FA00000))#define SCRIPT_ADDR_R __stringify(SDRAM_OFFSET(FC00000))#define PXEFILE_ADDR_R __stringify(SDRAM_OFFSET(FD00000))@@ -332,6 +334,18 @@ extern int soft_i2c_gpio_scl;"pxefile_addr_r=" PXEFILE_ADDR_R "\0" \"ramdisk_addr_r=" RAMDISK_ADDR_R "\0" Quoted 9 lines
include/configs/sunxi-common.h extern int soft_i2c_gpio_scl; · line 345
Quoted 9 lines
include/configs/sunxi-common.h +9
-0+#ifdef CONFIG_ARM64 + +#define MEM_LAYOUT_ENV_EXTRA_SETTINGS \ + "kernel_comp_addr_r=" KERNEL_COMP_ADDR_R "\0" \ + "kernel_comp_size=" KERNEL_COMP_SIZE "\0" + +#else + +#define MEM_LAYOUT_ENV_EXTRA_SETTINGS ""This can be defined to nothing. No empty string is needed.
Quoted 16 lines
Quoted 15 lines
include/configs/sunxi-common.h +4
-0+ +#endif +#define DFU_ALT_INFO_RAM \ "dfu_alt_info_ram=" \ "kernel ram " KERNEL_ADDR_R " 0x1000000;" \@@ -487,6 +501,7 @@ extern int soft_i2c_gpio_scl;#define CONFIG_EXTRA_ENV_SETTINGS \ CONSOLE_ENV_SETTINGS \ MEM_LAYOUT_ENV_SETTINGS \ + MEM_LAYOUT_ENV_EXTRA_SETTINGS \ DFU_ALT_INFO_RAM \ "fdtfile=" FDTFILE "\0" \ "console=ttyS0,115200\0" \
Samuel Holland
maintainerPATCH 1/1 sunxi-common: support loading compressed kernel images on ARMv8
Andre,
Quoted 21 lines · Andre Przywara
Quoted 11 lines · On Sat, 17 Apr 2021 12:47:23 -0500 Samuel Holland <[email protected]> wrote:
Quoted 8 lines · Andre Przywara
On 20/02/2021 12:14, Nicolas Boulenguez wrote:
Hi Arnaud,
Quoted 1 line
From: Arnaud Ferraris <[email protected]>
as mentioned before, this looks useful, so can you re-send this with a commit message and your Signed-off-by:?
It looks like you picked up this patch regardless?
Yes, I asked him twice, without any reply. At the end I figured that the danger of a copyright infringement is low given the nature of the change, and I didn't feel this should block this useful feature. The alternative would be to have sent it as a patch of mine, but I felt that I should preserve his authorship, so took the patch anyway. I got a reply from him on another patch, and it's not his first U-Boot patch, so I think it's just an oversight (from the sender of the patch?)
Quoted 2 lines
Chen-Yu asked about the feature lately, so if you think that approach is dodgy, we can revert it and take another version of the patch.
Okay, I'll trust your judgement here.
Quoted 8 lines
Quoted 7 lines
Quoted 4 lines
Also I was wondering if you could increase the
COMP_SIZE? The 64MB look rather arbitrary and maybe unnecessarily limiting. I think we could go up till0xfa00000, but maybe should stop at0xf800000, to leave some space for further extensions?And you changed
KERNEL_COMP_SIZEto0xb000000. How does that work when U-Boot itself is at0x4a000000(KERNEL_COMP_ADDR_R+0x6000000)?
Quoted 7 lines
It's not anymore at this time, that's just the load address, and it relocates itself to the end of DRAM very early. So basically the whole memory except the very end is available.
Btw, the reason we confine everything to below
0x50000000is just that we need to concatenate the base (0x4....) with that offset, and cannot use arithmetic, because that doesn't work in the Makefiles.
Ah, that makes sense. So we're assuming that U-Boot relocates itself above 0x50000000, and so nothing important remains inside the address range used by sunxi-common.h.
Thanks for the explanation,
Samuel
Quoted 54 lines
Cheers,
AndreQuoted 50 lines
Quoted 21 lines
Quoted 21 lines
--- include/configs/sunxi-common.h | 15 +++++++++++++++ 1 file changed, 15 insertions(+)include/configs/sunxi-common.h +2
-0@@ -291,6 +291,8 @@ extern int soft_i2c_gpio_scl;*/ #define BOOTM_SIZE __stringify(0xa000000)#define KERNEL_ADDR_R __stringify(SDRAM_OFFSET(0080000)) +#define KERNEL_COMP_ADDR_R __stringify(SDRAM_OFFSET(4000000)) +#define KERNEL_COMP_SIZE __stringify(0x4000000)#define FDT_ADDR_R __stringify(SDRAM_OFFSET(FA00000))#define SCRIPT_ADDR_R __stringify(SDRAM_OFFSET(FC00000))#define PXEFILE_ADDR_R __stringify(SDRAM_OFFSET(FD00000))@@ -332,6 +334,18 @@ extern int soft_i2c_gpio_scl;"pxefile_addr_r=" PXEFILE_ADDR_R "\0" \"ramdisk_addr_r=" RAMDISK_ADDR_R "\0" Quoted 9 lines
include/configs/sunxi-common.h extern int soft_i2c_gpio_scl; · line 345
Quoted 9 lines
include/configs/sunxi-common.h +9
-0+#ifdef CONFIG_ARM64 + +#define MEM_LAYOUT_ENV_EXTRA_SETTINGS \ + "kernel_comp_addr_r=" KERNEL_COMP_ADDR_R "\0" \ + "kernel_comp_size=" KERNEL_COMP_SIZE "\0" + +#else + +#define MEM_LAYOUT_ENV_EXTRA_SETTINGS ""This can be defined to nothing. No empty string is needed.
Quoted 16 lines
Quoted 15 lines
include/configs/sunxi-common.h +4
-0+ +#endif +#define DFU_ALT_INFO_RAM \ "dfu_alt_info_ram=" \ "kernel ram " KERNEL_ADDR_R " 0x1000000;" \@@ -487,6 +501,7 @@ extern int soft_i2c_gpio_scl;#define CONFIG_EXTRA_ENV_SETTINGS \ CONSOLE_ENV_SETTINGS \ MEM_LAYOUT_ENV_SETTINGS \ + MEM_LAYOUT_ENV_EXTRA_SETTINGS \ DFU_ALT_INFO_RAM \ "fdtfile=" FDTFILE "\0" \ "console=ttyS0,115200\0" \
Re: [PATCH] sunxi-common: support loading compressed kernel images on ARMv8
In reply to Andre PrzywaraHi Andre,
Le 17/04/2021 à 20:23, Andre Przywara a écrit :
Quoted 17 lines
On Sat, 17 Apr 2021 12:47:23 -0500
Samuel Holland <[email protected]> wrote:Hi Samuel,
Quoted 11 lines · Andre Przywara
Quoted 8 lines · Nicolas Boulenguez
Hi Arnaud,
Quoted 1 line
From: Arnaud Ferraris <[email protected]>
as mentioned before, this looks useful, so can you re-send this with a commit message and your Signed-off-by:?
It looks like you picked up this patch regardless?
Quoted 7 lines
Yes, I asked him twice, without any reply. At the end I figured that the danger of a copyright infringement is low given the nature of the change, and I didn't feel this should block this useful feature. The alternative would be to have sent it as a patch of mine, but I felt that I should preserve his authorship, so took the patch anyway. I got a reply from him on another patch, and it's not his first U-Boot patch, so I think it's just an oversight (from the sender of the patch?)
Thanks for picking up and reworking this patch, and my apologies for not replying earlier: I had personal stuff to deal with for a few months, and am only now able to fully process my emails backlog.
I should be more reactive from now on, and might have a few more patches for you in the near future.
All the best,
Arnaud
Quoted 73 lines
Chen-Yu asked about the feature lately, so if you think that approach is dodgy, we can revert it and take another version of the patch.
Quoted 7 lines
Quoted 4 lines
Also I was wondering if you could increase the
COMP_SIZE? The 64MB look rather arbitrary and maybe unnecessarily limiting. I think we could go up till0xfa00000, but maybe should stop at0xf800000, to leave some space for further extensions?And you changed
KERNEL_COMP_SIZEto0xb000000. How does that work when U-Boot itself is at0x4a000000(KERNEL_COMP_ADDR_R+0x6000000)?It's not anymore at this time, that's just the load address, and it relocates itself to the end of DRAM very early. So basically the whole memory except the very end is available.
Btw, the reason we confine everything to below0x50000000is just that we need to concatenate the base (0x4....) with that offset, and cannot use arithmetic, because that doesn't work in the Makefiles.Cheers,
AndreQuoted 50 lines
Quoted 21 lines
Quoted 21 lines
--- include/configs/sunxi-common.h | 15 +++++++++++++++ 1 file changed, 15 insertions(+)include/configs/sunxi-common.h +2
-0@@ -291,6 +291,8 @@ extern int soft_i2c_gpio_scl;*/ #define BOOTM_SIZE __stringify(0xa000000)#define KERNEL_ADDR_R __stringify(SDRAM_OFFSET(0080000)) +#define KERNEL_COMP_ADDR_R __stringify(SDRAM_OFFSET(4000000)) +#define KERNEL_COMP_SIZE __stringify(0x4000000)#define FDT_ADDR_R __stringify(SDRAM_OFFSET(FA00000))#define SCRIPT_ADDR_R __stringify(SDRAM_OFFSET(FC00000))#define PXEFILE_ADDR_R __stringify(SDRAM_OFFSET(FD00000))@@ -332,6 +334,18 @@ extern int soft_i2c_gpio_scl;"pxefile_addr_r=" PXEFILE_ADDR_R "\0" \"ramdisk_addr_r=" RAMDISK_ADDR_R "\0" Quoted 9 lines
include/configs/sunxi-common.h extern int soft_i2c_gpio_scl; · line 345
Quoted 9 lines
include/configs/sunxi-common.h +9
-0+#ifdef CONFIG_ARM64 + +#define MEM_LAYOUT_ENV_EXTRA_SETTINGS \ + "kernel_comp_addr_r=" KERNEL_COMP_ADDR_R "\0" \ + "kernel_comp_size=" KERNEL_COMP_SIZE "\0" + +#else + +#define MEM_LAYOUT_ENV_EXTRA_SETTINGS ""This can be defined to nothing. No empty string is needed.
Quoted 16 lines
Quoted 15 lines
include/configs/sunxi-common.h +4
-0+ +#endif +#define DFU_ALT_INFO_RAM \ "dfu_alt_info_ram=" \ "kernel ram " KERNEL_ADDR_R " 0x1000000;" \@@ -487,6 +501,7 @@ extern int soft_i2c_gpio_scl;#define CONFIG_EXTRA_ENV_SETTINGS \ CONSOLE_ENV_SETTINGS \ MEM_LAYOUT_ENV_SETTINGS \ + MEM_LAYOUT_ENV_EXTRA_SETTINGS \ DFU_ALT_INFO_RAM \ "fdtfile=" FDTFILE "\0" \ "console=ttyS0,115200\0" \
PATCH 1/1 arm: dts: sun50i-a64-pinephone: fix random wifi mac address
In reply to Nicolas BoulenguezFrom: Arnaud Ferraris <[email protected]>
The wi-fi mac-address was previously changing at every reboot.
--- arch/arm/dts/sun50i-a64-pinephone.dtsi | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+)
arch/arm/dts/sun50i-a64-pinephone.dtsi +22 -0
@@ -14,6 +14,7 @@ / { aliases { serial0 = &uart0; + ethernet0 = &rtl8723cs; }; backlight: backlight {
@@ -49,6 +50,13 @@ }; }; + reg_vbat_wifi: vbat-wifi { + compatible = "regulator-fixed"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vbat-wifi"; + }; + speaker_amp: audio-amplifier { compatible = "simple-audio-amplifier"; enable-gpios = <&pio 2 7 GPIO_ACTIVE_HIGH>; /* PC7 */
@@ -195,6 +203,20 @@ status = "okay"; }; +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; + vmmc-supply = <®_vbat_wifi>; + vqmmc-supply = <®_dldo4>; + bus-width = <4>; + non-removable; + status = "okay"; + + rtl8723cs: wifi at 1 { + reg = <1>; + }; +}; + &mmc2 { pinctrl-names = "default"; pinctrl-0 = <&mmc2_pins>;
Signature · 1 line
2.29.2
PATCH 1/1 arm: dts: sun50i-a64-pinephone: fix random wifi mac address
Quoted 3 lines · Nicolas Boulenguez
From: Arnaud Ferraris <[email protected]>
The wi-fi mac-address was previously changing at every reboot.
This is already part of the kernel .dtsi, which we will sync anyway (with the new merge window). So we can drop this specific patch.
Cheers,
Andre
Quoted 53 lines
--- arch/arm/dts/sun50i-a64-pinephone.dtsi | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+)arch/arm/dts/sun50i-a64-pinephone.dtsi +22
-0@@ -14,6 +14,7 @@ / { aliases { serial0 = &uart0; + ethernet0 = &rtl8723cs; }; backlight: backlight {@@ -49,6 +50,13 @@ }; }; + reg_vbat_wifi: vbat-wifi { + compatible = "regulator-fixed"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vbat-wifi"; + }; + speaker_amp: audio-amplifier { compatible = "simple-audio-amplifier"; enable-gpios = <&pio 2 7 GPIO_ACTIVE_HIGH>; /* PC7 */@@ -195,6 +203,20 @@ status = "okay"; }; +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; + vmmc-supply = <®_vbat_wifi>; + vqmmc-supply = <®_dldo4>; + bus-width = <4>; + non-removable; + status = "okay"; + + rtl8723cs: wifi at 1 { + reg = <1>; + }; +}; + &mmc2 { pinctrl-names = "default"; pinctrl-0 = <&mmc2_pins>;
PATCH 2/4 pinephone_defconfig: reduce boot delay
In reply to Nicolas BoulenguezQuoted 4 lines · Nicolas Boulenguez
From: Arnaud Ferraris <[email protected]>
On a cellular phone, the vast majority of users can be expected to have no serial console connected and prefer a short boot.
It's a bit tricky to break in with a delay of 0, but indeed most users won't care, so looks fine to me.
But it's missing a Signed-off-by: line.
Cheers,
Andre
Quoted 15 lines
--- configs/pinephone_defconfig | 1 + 1 file changed, 1 insertion(+)configs/pinephone_defconfig +1
-0@@ -10,4 +10,5 @@ CONFIG_PINEPHONE_DT_SELECTION=y CONFIG_DEFAULT_DEVICE_TREE="sun50i-a64-pinephone-1.2" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_BOOTDELAY=0 CONFIG_OF_LIST="sun50i-a64-pinephone-1.1 sun50i-a64-pinephone-1.2"
PATCH 2/4 pinephone_defconfig: reduce boot delay
Quoted 10 lines · Andr? Przywara
Quoted 4 lines · Nicolas Boulenguez
From: Arnaud Ferraris <[email protected]>
On a cellular phone, the vast majority of users can be expected to have no serial console connected and prefer a short boot.
It's a bit tricky to break in with a delay of 0, but indeed most users won't care, so looks fine to me.
But it's missing a Signed-off-by: line.
I'm not sure we should start accepting custom boards changes like it's done here, this will only lead to inconsistencies between boards in the long run.
And a defconfig is really easy to change anyway, even when it's integrated in build systems
Maxime
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 228 bytes
Desc: not available
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20210225/c584200a/attachment.sig>
PATCH 2/4 pinephone_defconfig: reduce boot delay
On Thu, 25 Feb 2021 21:58:38 +0100
Maxime Ripard <[email protected]> wrote:
Hi,
Quoted 7 lines · Andr? Przywara
Quoted 6 lines · Nicolas Boulenguez
Quoted 4 lines
From: Arnaud Ferraris <[email protected]>
On a cellular phone, the vast majority of users can be expected to have no serial console connected and prefer a short boot.
Quoted 8 lines
Quoted 4 lines
It's a bit tricky to break in with a delay of 0, but indeed most users won't care, so looks fine to me.
But it's missing a Signed-off-by: line.
I'm not sure we should start accepting custom boards changes like it's done here, this will only lead to inconsistencies between boards in the long run.
I am a bit undecided, I see merits in both arguments.
Quoted 2 lines
And a defconfig is really easy to change anyway, even when it's integrated in build systems
Nicolas, could you live with:
$ sed -i s/^CONFIG_BOOTDELAY=2/CONFIG_BOOTDELAY=0/ .config
in your build system? Or is the U-Boot build generic?
Cheers,
Andre
PATCH 2/4 pinephone_defconfig: reduce boot delay
Quoted 3 lines
Nicolas, could you live with:
$ sed -i s/^CONFIG_BOOTDELAY=2/CONFIG_BOOTDELAY=0/ .config in your build system? Or is the U-Boot build generic?
No practical issue, the patch is already applied by Mobian. My concern was only to reduce divergence between redistributors.
Anyway, thanks for asking before taking the decision.
PATCH 2/4 pinephone_defconfig: reduce boot delay
In reply to Maxime RipardHi Maxime,
Le 25/02/2021 ? 21:58, Maxime Ripard a ?crit?:
Quoted 7 lines · Andr? Przywara
Quoted 6 lines · Nicolas Boulenguez
Quoted 4 lines
From: Arnaud Ferraris <[email protected]>
On a cellular phone, the vast majority of users can be expected to have no serial console connected and prefer a short boot.
Quoted 8 lines
Quoted 4 lines
It's a bit tricky to break in with a delay of 0, but indeed most users won't care, so looks fine to me.
But it's missing a Signed-off-by: line.
I'm not sure we should start accepting custom boards changes like it's done here, this will only lead to inconsistencies between boards in the long run.
The original reasoning behind this was, the PinePhone (and PineTab) is both a dev board and a consumer device, which is why I assumed it could use some kind of "special treatment".
However, I don't have a strong opinion on that matter and can certainly live with the default boot delay.
Regards,
Arnaud
Quoted 6 lines
And a defconfig is really easy to change anyway, even when it's integrated in build systems
Maxime