add Kontron pITX-imx8m board

This patch series adds support for the Kontron pITX-imx8m board:

https://www.kontron.com/products/boards-and-standard-form-factors/single-board-computer/pitx-imx8m.html

Heiko Thiery (2):
dt-bindings: arm: fsl: add Kontron pITX-imx8m board
arm64: dts: fsl: add support for Kontron pitx-imx8m board

 .../devicetree/bindings/arm/fsl.yaml          |   1 +
 arch/arm64/boot/dts/freescale/Makefile        |   1 +
 .../freescale/imx8mq-kontron-pitx-imx8m.dts   | 611 ++++++++++++++++++
 3 files changed, 613 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/imx8mq-kontron-pitx-imx8m.dts

2.30.0

Add the Kontron pITX-imx8m board.

---
v2:
- bring in correct alphabetical order

v3:
- no change

v4:
- no change

 Documentation/devicetree/bindings/arm/fsl.yaml | 1 +
 1 file changed, 1 insertion(+)

index 297c87f45db8..6d121bc9af8d 100644
@@ -733,6 +733,7 @@ properties:
               - einfochips,imx8mq-thor96  # i.MX8MQ Thor96 Board
               - fsl,imx8mq-evk            # i.MX8MQ EVK Board
               - google,imx8mq-phanbell    # Google Coral Edge TPU
+              - kontron,pitx-imx8m        # Kontron pITX-imx8m Board
               - purism,librem5-devkit     # Purism Librem5 devkit
               - solidrun,hummingboard-pulse # SolidRun Hummingboard Pulse
               - technexion,pico-pi-imx8m  # TechNexion PICO-PI-8M evk

2.30.0

The Kontron pitx-imx8m board is based on an i.MX8MQ soc.

---
v2:
- bring root nodes in alphabetical order
- remove pinctrl_gpio_keys for pciewake
- remove pinctrl_sai2 and pinctrl_spdfif1 since it is not used yet

Thanks to Michael Walle:
- add pinctrl for regulator-v-3v3-sd
- add name for regulator swbst
- add comment about currently unused audio codec
- put usb_phy entry in correct alphabetical order

Thanks to Krzysztof Kozlowski:
- use generic names for pcie-refclk, tpm, fan-controller, sensor
- remove empty line
- fix group name to match schema (ecspi2cs -> ecspi2csgrp)

v3:
Thanks to Michael Walle:
- set compatible as first in regulator-v-3v3-sd node
- remove audio-codec@1a node

Thanks to Krzysztof Kozlowski:
- use more generic name for pcie reference clock

v4:
Thanks to Fabio Estevam:
- rename regulator node
- remove tpm-reset node
- remove usb-hub-reset
- use reset-gpios for ethernet phy instead of phy-reset-gpios
- remove disable-gpio and ext_osc property from pcie0
- remove ext_osc property from pcie1

 arch/arm64/boot/dts/freescale/Makefile        |   1 +
 .../freescale/imx8mq-kontron-pitx-imx8m.dts   | 611 ++++++++++++++++++
 2 files changed, 612 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/imx8mq-kontron-pitx-imx8m.dts

index 6438db3822f8..9fc2c6f64407 100644
@@ -47,6 +47,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mp-evk.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-phyboard-pollux-rdk.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mq-evk.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mq-hummingboard-pulse.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mq-kontron-pitx-imx8m.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mq-librem5-devkit.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mq-librem5-r2.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mq-librem5-r3.dtb

2.30.0

Hi Heiko,

Applied both, thanks.