dt-bindings: display: add bindings for newhaven, 1.8-128160EF
Subsystems (3)
PATCH v2 1/2 dt-bindings: display: add bindings for newhaven, 1.8-128160EF
This adds documentation for a new ILI9163 based, SPI connected display.
--- .../bindings/display/ilitek,ili9163.txt | 27 +++++++++++++++++++ 1 file changed, 27 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/ilitek,ili9163.txt
Documentation/devicetree/bindings/display/ilitek,ili9163.txt new file +27 -0
@@ -0,0 +1,27 @@ +Ilitek ILI9163 display panels + +This binding is for display panels using an Ilitek ILI9163 controller in SPI +mode. + +Required properties: +- compatible: "newhaven,1.8-128160EF", "ilitek,ili9163" +- dc-gpios: D/C pin +- reset-gpios: Reset pin + +The node for this driver must be a child node of a SPI controller, hence +all mandatory properties described in ../spi/spi-bus.txt must be specified. + +Optional properties: +- rotation: panel rotation in degrees counter clockwise (0,90,180,270) +- backlight: phandle of the backlight device attached to the panel + +Example: + display@0{ + compatible = "newhaven,1.8-128160EF", "ilitek,ili9163" + reg = <0>; + spi-max-frequency = <32000000>; + dc-gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>; + rotation = <270>; + backlight = <&backlight>; + };
Signature · 6 lines
2.29.2 _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
PATCH v2 2/2 drm/tiny: add driver for newhaven,1.8-128160EF
This patch adds support for Newhaven's NHD-1.8-128160EF display, featuring an Ilitek ILI9163 controller.
---
v2:
* Address comments from Thomas Zimmermann
* Split patch in DT and implementation part
drivers/gpu/drm/tiny/Kconfig | 13 ++ drivers/gpu/drm/tiny/Makefile | 1 + drivers/gpu/drm/tiny/ili9163.c | 224 +++++++++++++++++++++++++++++++++ 3 files changed, 238 insertions(+) create mode 100644 drivers/gpu/drm/tiny/ili9163.c
drivers/gpu/drm/tiny/Kconfig +13 -0
@@ -41,6 +41,19 @@ config TINYDRM_HX8357D If M is selected the module will be called hx8357d. +config TINYDRM_ILI9163 + tristate "DRM support for ILI9163 display panels" + depends on DRM && SPI + select DRM_KMS_HELPER + select DRM_KMS_CMA_HELPER + select DRM_MIPI_DBI + select BACKLIGHT_CLASS_DEVICE + help + DRM driver for the following Ilitek ILI9163 panels: + * NHD-1.8-128160EF 128x160 TFT + + If M is selected the module will be called ili9163. + config TINYDRM_ILI9225 tristate "DRM support for ILI9225 display panels" depends on DRM && SPI
drivers/gpu/drm/tiny/Makefile +1 -0
@@ -3,6 +3,7 @@ obj-$(CONFIG_DRM_CIRRUS_QEMU) += cirrus.o obj-$(CONFIG_DRM_GM12U320) += gm12u320.o obj-$(CONFIG_TINYDRM_HX8357D) += hx8357d.o +obj-$(CONFIG_TINYDRM_ILI9163) += ili9163.o obj-$(CONFIG_TINYDRM_ILI9225) += ili9225.o obj-$(CONFIG_TINYDRM_ILI9341) += ili9341.o obj-$(CONFIG_TINYDRM_ILI9486) += ili9486.o
drivers/gpu/drm/tiny/ili9163.c new file +224 -0
224 lines not on this page · raw message
Signature · 6 lines
2.29.2 _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
Rob Herring
maintainerRe: [PATCH v2 1/2] dt-bindings: display: add bindings for newhaven,1.8-128160EF
In reply to Daniel MackQuoted 7 lines · Daniel Mack
This adds documentation for a new ILI9163 based, SPI connected display.
Signed-off-by Daniel Mack <[email protected]>--- .../bindings/display/ilitek,ili9163.txt | 27 +++++++++++++++++++ 1 file changed, 27 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/ilitek,ili9163.txt
Bindings are in schema format now.
Quoted 37 lines
Documentation/devicetree/bindings/display/ilitek,ili9163.txt new file +27
-0@@ -0,0 +1,27 @@ +Ilitek ILI9163 display panels + +This binding is for display panels using an Ilitek ILI9163 controller in SPI +mode. + +Required properties: +- compatible: "newhaven,1.8-128160EF", "ilitek,ili9163" +- dc-gpios: D/C pin +- reset-gpios: Reset pin + +The node for this driver must be a child node of a SPI controller, hence +all mandatory properties described in ../spi/spi-bus.txt must be specified. + +Optional properties: +- rotation: panel rotation in degrees counter clockwise (0,90,180,270) +- backlight: phandle of the backlight device attached to the panel + +Example: + display@0{ + compatible = "newhaven,1.8-128160EF", "ilitek,ili9163" + reg = <0>; + spi-max-frequency = <32000000>; + dc-gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>; + rotation = <270>; + backlight = <&backlight>; + };Signature · 1 line
2.29.2
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel