Skip to contentSkip to conversation

arm64: dts: broadcom: bcm4908: fix Netgear R8000P LEDs nodes

PATCH Applied Rafał Miłecki 2 participants 2 messages Mar 10, 2021 Device tree bindings

lore
Share & tools
lore

Rafał Miłecki

author
#0 lore raw

PATCH 1/1 arm64: dts: broadcom: bcm4908: fix Netgear R8000P LEDs nodes

From: Rafał Miłecki <[email protected]>

Update nodes names to match leds-gpio.yaml requirements.

Fixes 29b08ead247a ("arm64: dts: broadcom: bcm4908: add remaining Netgear R8000P LEDs")
Signed-off-by Rafał Miłecki <[email protected]>
---
 .../bcm4908/bcm4906-netgear-r8000p.dts         | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)
arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts +9 -9
index 7b24ad365a3c..41e8fbf095c6 100644
@@ -18,55 +18,55 @@ memory@0 {
 	leds {
 		compatible = "gpio-leds";
 
-		power-white {
+		led-power-white {
 			function = LED_FUNCTION_POWER;
 			color = <LED_COLOR_ID_WHITE>;
 			gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
 		};
 
-		power-amber {
+		led-power-amber {
 			function = LED_FUNCTION_POWER;
 			color = <LED_COLOR_ID_AMBER>;
 			gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
 		};
 
-		wps {
+		led-wps {
 			function = LED_FUNCTION_WPS;
 			color = <LED_COLOR_ID_WHITE>;
 			gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
 		};
 
-		2ghz {
+		led-2ghz {
 			function = "2ghz";
 			color = <LED_COLOR_ID_WHITE>;
 			gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
 		};
 
-		5ghz-1 {
+		led-5ghz-1 {
 			function = "5ghz-1";
 			color = <LED_COLOR_ID_WHITE>;
 			gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
 		};
 
-		5ghz-2 {
+		led-5ghz-2 {
 			function = "5ghz-2";
 			color = <LED_COLOR_ID_WHITE>;
 			gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
 		};
 
-		usb2 {
+		led-usb2 {
 			function = "usb2";
 			color = <LED_COLOR_ID_WHITE>;
 			gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
 		};
 
-		usb3 {
+		led-usb3 {
 			function = "usb3";
 			color = <LED_COLOR_ID_WHITE>;
 			gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
 		};
 
-		wifi {
+		led-wifi {
 			function = "wifi";
 			color = <LED_COLOR_ID_WHITE>;
 			gpios = <&gpio0 56 GPIO_ACTIVE_LOW>;
Signature · 1 line
2.26.2