Skip to contentSkip to conversation

crypto: arm - clean up redundant helper macros

PATCH In review Ard Biesheuvel 2 participants 4 messages Mar 10, 2021 – Mar 19, 2021

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

v3 cover crypto: arm - clean up redundant helper macros

Now that ARM's asm/assembler.h provides mov_l and rev_l macros, let's get rid of the locally defined ones that live in the ChaCha and AES crypto code.

Changes since v2:
- fix rev_32->rev_l in the patch subject lines
- add Eric's ack

Changes since v1:
- drop the patch that introduces rev_l, it has been merged in v5.12-rc
- rev_32 was renamed to rev_l, so both patches were updated to reflect that
- add acks from Nico, Geert and Linus

Cc Geert Uytterhoeven <[email protected]>
Cc Nicolas Pitre <[email protected]>
Cc Eric Biggers <[email protected]>
Cc Linus Walleij <[email protected]>

Ard Biesheuvel (2):
crypto: arm/aes-scalar - switch to common rev_l/mov_l macros
crypto: arm/chacha-scalar - switch to common rev_l macro

 arch/arm/crypto/aes-cipher-core.S    | 42 +++++--------------
 arch/arm/crypto/chacha-scalar-core.S | 43 ++++++--------------
 2 files changed, 23 insertions(+), 62 deletions(-)
Signature · 1 line
2.30.1
#1 lore raw

PATCH v3 1/2 crypto: arm/aes-scalar - switch to common rev_l/mov_l macros

The scalar AES implementation has some locally defined macros which reimplement things that are now available in macros defined in assembler.h. So let's switch to those.

---
 arch/arm/crypto/aes-cipher-core.S | 42 +++++---------------
 1 file changed, 10 insertions(+), 32 deletions(-)
arch/arm/crypto/aes-cipher-core.S +10 -32
index 472e56d09eea..1da3f41359aa 100644
@@ -99,28 +99,6 @@
 	__hround	\out2, \out3, \in2, \in1, \in0, \in3, \in1, \in0, 0, \sz, \op, \oldcpsr
 	.endm
 
-	.macro		__rev, out, in
-	.if		__LINUX_ARM_ARCH__ < 6
-	lsl		t0, \in, #24
-	and		t1, \in, #0xff00
-	and		t2, \in, #0xff0000
-	orr		\out, t0, \in, lsr #24
-	orr		\out, \out, t1, lsl #8
-	orr		\out, \out, t2, lsr #8
-	.else
-	rev		\out, \in
-	.endif
-	.endm
-
-	.macro		__adrl, out, sym, c
-	.if		__LINUX_ARM_ARCH__ < 7
-	ldr\c		\out, =\sym
-	.else
-	movw\c		\out, #:lower16:\sym
-	movt\c		\out, #:upper16:\sym
-	.endif
-	.endm
-
 	.macro		do_crypt, round, ttab, ltab, bsz
 	push		{r3-r11, lr}
 
@@ -133,10 +111,10 @@
 	ldr		r7, [in, #12]
 
 #ifdef CONFIG_CPU_BIG_ENDIAN
-	__rev		r4, r4
-	__rev		r5, r5
-	__rev		r6, r6
-	__rev		r7, r7
+	rev_l		r4, t0
+	rev_l		r5, t0
+	rev_l		r6, t0
+	rev_l		r7, t0
 #endif
 
 	eor		r4, r4, r8
@@ -144,7 +122,7 @@
 	eor		r6, r6, r10
 	eor		r7, r7, r11
 
-	__adrl		ttab, \ttab
+	mov_l		ttab, \ttab
 	/*
 	 * Disable interrupts and prefetch the 1024-byte 'ft' or 'it' table into
 	 * L1 cache, assuming cacheline size >= 32.  This is a hardening measure
@@ -180,7 +158,7 @@
 2:	.ifb		\ltab
 	add		ttab, ttab, #1
 	.else
-	__adrl		ttab, \ltab
+	mov_l		ttab, \ltab
 	// Prefetch inverse S-box for final round; see explanation above
 	.set		i, 0
 	.rept		256 / 64
@@ -194,10 +172,10 @@
 	\round		r4, r5, r6, r7, r8, r9, r10, r11, \bsz, b, rounds
 
 #ifdef CONFIG_CPU_BIG_ENDIAN
-	__rev		r4, r4
-	__rev		r5, r5
-	__rev		r6, r6
-	__rev		r7, r7
+	rev_l		r4, t0
+	rev_l		r5, t0
+	rev_l		r6, t0
+	rev_l		r7, t0
 #endif
 
 	ldr		out, [sp]
Signature · 1 line
2.30.1
#2 lore raw

PATCH v3 2/2 crypto: arm/chacha-scalar - switch to common rev_l macro

In reply to Ard Biesheuvel

Drop the local definition of a byte swapping macro and use the common one instead.

---
 arch/arm/crypto/chacha-scalar-core.S | 43 ++++++--------------
 1 file changed, 13 insertions(+), 30 deletions(-)
arch/arm/crypto/chacha-scalar-core.S +13 -30
index 2985b80a45b5..083fe1ab96d0 100644
@@ -41,32 +41,15 @@
 	X14	.req	r12
 	X15	.req	r14
 
-.macro __rev		out, in,  t0, t1, t2
-.if __LINUX_ARM_ARCH__ >= 6
-	rev		\out, \in
-.else
-	lsl		\t0, \in, #24
-	and		\t1, \in, #0xff00
-	and		\t2, \in, #0xff0000
-	orr		\out, \t0, \in, lsr #24
-	orr		\out, \out, \t1, lsl #8
-	orr		\out, \out, \t2, lsr #8
-.endif
-.endm
-
-.macro _le32_bswap	x,  t0, t1, t2
+.macro _le32_bswap_4x	a, b, c, d,  tmp
 #ifdef __ARMEB__
-	__rev		\x, \x,  \t0, \t1, \t2
+	rev_l		\a,  \tmp
+	rev_l		\b,  \tmp
+	rev_l		\c,  \tmp
+	rev_l		\d,  \tmp
 #endif
 .endm
 
-.macro _le32_bswap_4x	a, b, c, d,  t0, t1, t2
-	_le32_bswap	\a,  \t0, \t1, \t2
-	_le32_bswap	\b,  \t0, \t1, \t2
-	_le32_bswap	\c,  \t0, \t1, \t2
-	_le32_bswap	\d,  \t0, \t1, \t2
-.endm
-
 .macro __ldrd		a, b, src, offset
 #if __LINUX_ARM_ARCH__ >= 6
 	ldrd		\a, \b, [\src, #\offset]
@@ -200,7 +183,7 @@
 	add		X1, X1, r9
 	add		X2, X2, r10
 	add		X3, X3, r11
-	_le32_bswap_4x	X0, X1, X2, X3,  r8, r9, r10
+	_le32_bswap_4x	X0, X1, X2, X3,  r8
 	ldmia		r12!, {r8-r11}
 	eor		X0, X0, r8
 	eor		X1, X1, r9
@@ -216,7 +199,7 @@
 	ldmia		r12!, {X0-X3}
 	add		X6, r10, X6, ror #brot
 	add		X7, r11, X7, ror #brot
-	_le32_bswap_4x	X4, X5, X6, X7,  r8, r9, r10
+	_le32_bswap_4x	X4, X5, X6, X7,  r8
 	eor		X4, X4, X0
 	eor		X5, X5, X1
 	eor		X6, X6, X2
@@ -231,7 +214,7 @@
 	add		r1, r1, r9		// x9
 	add		r6, r6, r10		// x10
 	add		r7, r7, r11		// x11
-	_le32_bswap_4x	r0, r1, r6, r7,  r8, r9, r10
+	_le32_bswap_4x	r0, r1, r6, r7,  r8
 	ldmia		r12!, {r8-r11}
 	eor		r0, r0, r8		// x8
 	eor		r1, r1, r9		// x9
@@ -245,7 +228,7 @@
 	add		r3, r9, r3, ror #drot	// x13
 	add		r4, r10, r4, ror #drot	// x14
 	add		r5, r11, r5, ror #drot	// x15
-	_le32_bswap_4x	r2, r3, r4, r5,  r9, r10, r11
+	_le32_bswap_4x	r2, r3, r4, r5,  r9
 	  ldr		r9, [sp, #72]		// load LEN
 	eor		r2, r2, r0		// x12
 	eor		r3, r3, r1		// x13
@@ -301,7 +284,7 @@
 	add		X1, X1, r9
 	add		X2, X2, r10
 	add		X3, X3, r11
-	_le32_bswap_4x	X0, X1, X2, X3,  r8, r9, r10
+	_le32_bswap_4x	X0, X1, X2, X3,  r8
 	stmia		r14!, {X0-X3}
 
 	// Save keystream for x4-x7
@@ -311,7 +294,7 @@
 	add		X5, r9, X5, ror #brot
 	add		X6, r10, X6, ror #brot
 	add		X7, r11, X7, ror #brot
-	_le32_bswap_4x	X4, X5, X6, X7,  r8, r9, r10
+	_le32_bswap_4x	X4, X5, X6, X7,  r8
 	  add		r8, sp, #64
 	stmia		r14!, {X4-X7}
 
@@ -323,7 +306,7 @@
 	add		r1, r1, r9		// x9
 	add		r6, r6, r10		// x10
 	add		r7, r7, r11		// x11
-	_le32_bswap_4x	r0, r1, r6, r7,  r8, r9, r10
+	_le32_bswap_4x	r0, r1, r6, r7,  r8
 	stmia		r14!, {r0,r1,r6,r7}
 	__ldrd		r8, r9, sp, 144
 	__ldrd		r10, r11, sp, 152
@@ -331,7 +314,7 @@
 	add		r3, r9, r3, ror #drot	// x13
 	add		r4, r10, r4, ror #drot	// x14
 	add		r5, r11, r5, ror #drot	// x15
-	_le32_bswap_4x	r2, r3, r4, r5,  r9, r10, r11
+	_le32_bswap_4x	r2, r3, r4, r5,  r9
 	stmia		r14, {r2-r5}
 
 	// Stack: ks0-ks15 unused0-unused7 x0-x15 OUT IN LEN
Signature · 1 line
2.30.1
maintainer
#3 lore raw
In reply to Ard Biesheuvel
Quoted 17 lines · Ard Biesheuvel

Now that ARM's asm/assembler.h provides mov_l and rev_l macros, let's get rid of the locally defined ones that live in the ChaCha and AES crypto code.

Changes since v2:
- fix rev_32->rev_l in the patch subject lines
- add Eric's ack

Changes since v1:
- drop the patch that introduces rev_l, it has been merged in v5.12-rc
- rev_32 was renamed to rev_l, so both patches were updated to reflect that
- add acks from Nico, Geert and Linus

Cc Geert Uytterhoeven <[email protected]>
Cc Nicolas Pitre <[email protected]>
Cc Eric Biggers <[email protected]>
Cc Linus Walleij <[email protected]>
Quoted 7 lines

Ard Biesheuvel (2):
crypto: arm/aes-scalar - switch to common rev_l/mov_l macros
crypto: arm/chacha-scalar - switch to common rev_l macro

 arch/arm/crypto/aes-cipher-core.S    | 42 +++++--------------
 arch/arm/crypto/chacha-scalar-core.S | 43 ++++++--------------
 2 files changed, 23 insertions(+), 62 deletions(-)

All applied. Thanks.

Signature · 3 lines
Email: Herbert Xu <[email protected]>
Home Page: http://gondor.apana.org.au/~herbert/
PGP Key: http://gondor.apana.org.au/~herbert/pubkey.txt