mm: huge_memory: a new debugfs interface for splitting THP tests.
Subsystems (3)
PATCH v3 1/1 mm: huge_memory: a new debugfs interface for splitting THP tests.
From: Zi Yan <[email protected]>
We do not have a direct user interface of splitting the compound page backing a THP and there is no need unless we want to expose the THP implementation details to users. Make <debugfs>/split_huge_pages accept a new command to do that.
By writing "<pid>,<vaddr_start>,<vaddr_end>" to <debugfs>/split_huge_pages, THPs within the given virtual address range from the process with the given pid are split. It is used to test split_huge_page function. In addition, a selftest program is added to tools/testing/selftests/vm to utilize the interface by splitting PMD THPs and PTE-mapped THPs.
This does not change the old behavior, i.e., writing 1 to the interface to split all THPs in the system.
Changelog:
From v2:
1. Reused existing <debugfs>/split_huge_pages interface. (suggested by Yang Shi)
From v1:
1. Removed unnecessary calling to vma_migratable, spotted by kernel test robot <[email protected]>.
2. Dropped the use of find_mm_struct and code it directly, since there is no need for the permission check in that function and the function is only available when migration is on.
3. Added some comments in the selftest program to clarify how PTE-mapped THPs are formed.
--- mm/huge_memory.c | 122 ++++++- tools/testing/selftests/vm/.gitignore | 1 + tools/testing/selftests/vm/Makefile | 1 + .../selftests/vm/split_huge_page_test.c | 313 ++++++++++++++++++ 4 files changed, 430 insertions(+), 7 deletions(-) create mode 100644 tools/testing/selftests/vm/split_huge_page_test.c
mm/huge_memory.c +115 -7
@@ -7,6 +7,7 @@#include <linux/mm.h> #include <linux/sched.h> +#include <linux/sched/mm.h> #include <linux/sched/coredump.h> #include <linux/sched/numa_balancing.h> #include <linux/highmem.h>
@@ -2922,16 +2923,13 @@ static struct shrinker deferred_split_shrinker = { };#ifdef CONFIG_DEBUG_FS -static int split_huge_pages_set (void *data,u64 val) +static void split_huge_pages_all (void ) {struct zone *zone;struct page *page;unsigned long pfn, max_zone_pfn;unsigned long total =0 , split =0 ; -if (val !=1 ) -return -EINVAL ; -for_each_populated_zone (zone) { max_zone_pfn =zone_end_pfn (zone);for (pfn = zone->zone_start_pfn; pfn < max_zone_pfn; pfn++) {
@@ -2959,11 +2957,121 @@ static int split_huge_pages_set(void *data, u64 val) }pr_info ("%lu of %lu THP split\n" , split, total); +} + +static ssize_t split_huge_pages_write (struct file *file,const char __user *buf, +size_t count,loff_t *ppops) +{ +static DEFINE_MUTEX (mutex); +ssize_t ret; +char input_buf[80 ];/* hold pid, start_vaddr, end_vaddr */ +int pid; +unsigned long vaddr_start, vaddr_end, addr; +struct task_struct *task; +struct mm_struct *mm; +unsigned long total =0 , split =0 ; + + ret =mutex_lock_interruptible (&mutex); +if (ret) +return ret; + + ret = -EFAULT ; + +memset (input_buf,0 ,80 ); +if (copy_from_user (input_buf, buf,min_t (size_t, count,80 ))) + goto out; + + input_buf[79 ] ='\0' ; + ret =sscanf (input_buf,"%d,0x%lx,0x%lx" , &pid, &vaddr_start, &vaddr_end); +if (ret ==1 && pid ==1 ) { +split_huge_pages_all (); + ret =strlen (input_buf); + goto out; + }else if (ret !=3 ) { + ret = -EINVAL ; + goto out; + } + + vaddr_start &=PAGE_MASK ; + vaddr_end &=PAGE_MASK ; + + ret =strlen (input_buf); +pr_debug ("split huge pages in pid: %d, vaddr: [%lx - %lx]\n" , + pid, vaddr_start, vaddr_end); + +/* Find the task_struct from pid */ +rcu_read_lock (); + task =find_task_by_vpid (pid); +if (!task) { +rcu_read_unlock (); + ret = -ESRCH ; + goto out; + } +get_task_struct (task); +rcu_read_unlock (); + +/* Find the mm_struct */ + mm =get_task_mm (task); +put_task_struct (task); + +if (!mm) { + ret = -EINVAL ; + goto out; + } + +mmap_read_lock (mm); +/* +* always increase addr by PAGE_SIZE, since we could have a PTE page +* table filled with PTE-mapped THPs, each of which is distinct. +*/ +for (addr = vaddr_start; addr < vaddr_end; addr +=PAGE_SIZE ) { +struct vm_area_struct *vma =find_vma (mm, addr); +unsigned int follflags; +struct page *page; + +if (!vma || addr < vma->vm_start) +break ; + +/* FOLL_DUMP to ignore special (like zero) pages */ + follflags =FOLL_GET |FOLL_DUMP ; + page =follow_page (vma, addr, follflags); + +if (IS_ERR (page)) +break ; +if (!page) +break ; + +if (!is_transparent_hugepage (page)) +continue ; + + total++; +if (!can_split_huge_page (compound_head (page),NULL )) +continue ; + +if (!trylock_page (page)) +continue ; + +if (!split_huge_page (page)) + split++; + +unlock_page (page); +put_page (page); + } +mmap_read_unlock (mm); +mmput (mm); + +pr_debug ("%lu of %lu THP split\n" , split, total); +out: +mutex_unlock (&mutex); +return ret; -return 0 ; } -DEFINE_DEBUGFS_ATTRIBUTE (split_huge_pages_fops,NULL , split_huge_pages_set, -"%llu\n" ); + +static const struct file_operations split_huge_pages_fops = { + .owner =THIS_MODULE , + .write = split_huge_pages_write, + .llseek = no_llseek, +};static int __init split_huge_pages_debugfs (void ) {
tools/testing/selftests/vm/.gitignore +1 -0
@@ -22,3 +22,4 @@ map_fixed_noreplace write_to_hugetlbfs hmm-tests local_config.* +split_huge_page_test
tools/testing/selftests/vm/Makefile +1 -0
@@ -42,6 +42,7 @@ TEST_GEN_FILES += on-fault-limit TEST_GEN_FILES += thuge-gen TEST_GEN_FILES += transhuge-stress TEST_GEN_FILES += userfaultfd +TEST_GEN_FILES += split_huge_page_test ifeq ($(MACHINE),x86_64) CAN_BUILD_I386 := $(shell ./../x86/check_cc.sh $(CC) ../x86/trivial_32bit_program.c -m32)
tools/testing/selftests/vm/split_huge_page_test.c new file +313 -0
313 lines not on this page · raw message
Signature · 1 line
2.30.1
Quoted 4 lines · Zi Yan
From: Zi Yan <[email protected]>
We do not have a direct user interface of splitting the compound page backing a THP
But we do. You expand it.
Quoted 11 lines
and there is no need unless we want to expose the THP implementation details to users. Make <debugfs>/split_huge_pages accept a new command to do that.
By writing "<pid>,<vaddr_start>,<vaddr_end>" to <debugfs>/split_huge_pages, THPs within the given virtual address range from the process with the given pid are split. It is used to test
split_huge_pagefunction. In addition, a selftest program is added totools/testing/selftests/vmto utilize the interface by splitting PMD THPs and PTE-mapped THPs.
Okay, makes sense.
But it doesn't cover non-mapped THPs. tmpfs may have file backed by THP that mapped nowhere. Do we want to cover this case too?
Maybe have PID:<pid>,<vaddr_start>,<vaddr_end> and FILE:<path>,<off_start>,<off_end> ?
Signature · 1 line
Kirill A. Shutemov
Zi Yan
reviewerQuoted 20 lines · Kirill A. Shutemov
Quoted 4 lines · Zi Yan
From: Zi Yan <[email protected]>
We do not have a direct user interface of splitting the compound page backing a THP
But we do. You expand it.
Quoted 11 lines
and there is no need unless we want to expose the THP implementation details to users. Make <debugfs>/split_huge_pages accept a new command to do that.
By writing "<pid>,<vaddr_start>,<vaddr_end>" to <debugfs>/split_huge_pages, THPs within the given virtual address range from the process with the given pid are split. It is used to test
split_huge_pagefunction. In addition, a selftest program is added totools/testing/selftests/vmto utilize the interface by splitting PMD THPs and PTE-mapped THPs.
Quoted 4 lines
Okay, makes sense.
But it doesn't cover non-mapped THPs. tmpfs may have file backed by THP that mapped nowhere. Do we want to cover this case too?
Sure. It would be useful when large page in page cache too. I will send v4 with tmpfs THP split. I will definitely need a review for it, since I am not familiar with getting a page from a file path.
Quoted 2 lines
Maybe have PID:<pid>,<vaddr_start>,<vaddr_end> and FILE:<path>,<off_start>,<off_end> ?
Or just check input[0] == ‘/‘ for file path input.
—
Best Regards,
Yan Zi
Quoted 23 lines · Zi Yan
Quoted 20 lines · Kirill A. Shutemov
Quoted 4 lines · Zi Yan
From: Zi Yan <[email protected]>
We do not have a direct user interface of splitting the compound page backing a THP
But we do. You expand it.
Quoted 11 lines
and there is no need unless we want to expose the THP implementation details to users. Make <debugfs>/split_huge_pages accept a new command to do that.
By writing "<pid>,<vaddr_start>,<vaddr_end>" to <debugfs>/split_huge_pages, THPs within the given virtual address range from the process with the given pid are split. It is used to test
split_huge_pagefunction. In addition, a selftest program is added totools/testing/selftests/vmto utilize the interface by splitting PMD THPs and PTE-mapped THPs.
Quoted 8 lines
Quoted 4 lines
Okay, makes sense.
But it doesn't cover non-mapped THPs. tmpfs may have file backed by THP that mapped nowhere. Do we want to cover this case too?
Sure. It would be useful when large page in page cache too. I will send v4 with tmpfs THP split. I will definitely need a review for it, since I am not familiar with getting a page from a file path.
We do have some APIs to return pages for a file range, i.e.
find_get_pagefind_get_pagesfind_get_entriesfind_get_pages_range
They all need address_space, so you need to convert file path to address_space before using them.
The hole punch of tmpfs uses find_get_entries(), just check what shmem_undo_range() does.
Quoted 10 lines
Quoted 3 lines
Maybe have PID:<pid>,<vaddr_start>,<vaddr_end> and FILE:<path>,<off_start>,<off_end> ?
Or just check input[0] == ‘/‘ for file path input.
—
Best Regards,
Yan Zi