dt-bindings: mtd: add binding for Linksys Northstar partitions
Subsystems (2)
PATCH 1/2 dt-bindings: mtd: add binding for Linksys Northstar partitions
From: Rafał Miłecki <[email protected]>
Linksys on Broadcom Northstar devices uses fixed flash layout with multiple firmware partitions.
--- .../mtd/partitions/linksys,ns-partitions.yaml | 74 +++++++++++++++++++ 1 file changed, 74 insertions(+) create mode 100644 Documentation/devicetree/bindings/mtd/partitions/linksys,ns-partitions.yaml
Documentation/devicetree/bindings/mtd/partitions/linksys,ns-partitions.yaml new file +74 -0
@@ -0,0 +1,74 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mtd/partitions/linksys,ns-partitions.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Linksys Northstar partitioning + +description: | + Linksys devices based on Broadcom Northstar architecture often use two + firmware partitions. One is used for regular booting, the other is treated as + fallback. + + This binding allows defining all fixed partitions and marking those containing + firmware. System can use that information e.g. for booting or flashing + purposes. + +maintainers: + - Rafał Miłecki <[email protected]> + +properties: + compatible: + const: linksys,ns-partitions + + "#address-cells": + enum: [ 1, 2 ] + + "#size-cells": + enum: [ 1, 2 ] + +patternProperties: + "^partition@[0-9a-f]+$": + $ref: "partition.yaml#" + properties: + compatible: + items: + - const: linksys,ns-firmware + - const: brcm,trx + unevaluatedProperties: false + +required: + - "#address-cells" + - "#size-cells" + +additionalProperties: false + +examples: + - | + partitions { + compatible = "linksys,ns-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "boot"; + reg = <0x0 0x100000>; + read-only; + }; + + partition@100000 { + label = "nvram"; + reg = <0x100000 0x100000>; + }; + + partition@200000 { + compatible = "linksys,ns-firmware", "brcm,trx"; + reg = <0x200000 0xf00000>; + }; + + partition@1100000 { + compatible = "linksys,ns-firmware", "brcm,trx"; + reg = <0x1100000 0xf00000>; + }; + };
Signature · 6 lines
2.26.2 ______________________________________________________ Linux MTD discussion mailing list http://lists.infradead.org/mailman/listinfo/linux-mtd/
PATCH 2/2 mtd: parsers: ofpart: support Linksys Northstar partitions
From: Rafał Miłecki <[email protected]>
This allows extending ofpart parser with support for Linksys Northstar devices. That support uses recently added quirks mechanism.
--- drivers/mtd/parsers/Kconfig | 10 +++++ drivers/mtd/parsers/Makefile | 1 + drivers/mtd/parsers/ofpart_core.c | 6 +++ drivers/mtd/parsers/ofpart_linksys_ns.c | 50 +++++++++++++++++++++++++ drivers/mtd/parsers/ofpart_linksys_ns.h | 18 +++++++++ 5 files changed, 85 insertions(+) create mode 100644 drivers/mtd/parsers/ofpart_linksys_ns.c create mode 100644 drivers/mtd/parsers/ofpart_linksys_ns.h
drivers/mtd/parsers/Kconfig +10 -0
@@ -76,6 +76,16 @@ config MTD_OF_PARTS_BCM4908 that can have multiple "firmware" partitions. It takes care of finding currently used one and backup ones. +config MTD_OF_PARTS_LINKSYS_NS + bool "Linksys Northstar partitioning support" + depends on MTD_OF_PARTS && (ARCH_BCM_5301X || ARCH_BCM4908 || COMPILE_TEST) + default ARCH_BCM_5301X + help + This provides partitions parser for Linksys devices based on Broadcom + Northstar architecture. Linksys commonly uses fixed flash layout with + two "firmware" partitions. Currently used firmware has to be detected + using CFE environment variable. + config MTD_PARSER_IMAGETAG tristate "Parser for BCM963XX Image Tag format partitions" depends on BCM63XX || BMIPS_GENERIC || COMPILE_TEST
drivers/mtd/parsers/Makefile +1 -0
@@ -6,6 +6,7 @@ obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o obj-$(CONFIG_MTD_OF_PARTS) += ofpart.o ofpart-y += ofpart_core.o ofpart-$(CONFIG_MTD_OF_PARTS_BCM4908) += ofpart_bcm4908.o +ofpart-$(CONFIG_MTD_OF_PARTS_LINKSYS_NS)+= ofpart_linksys_ns.o obj-$(CONFIG_MTD_PARSER_IMAGETAG) += parser_imagetag.o obj-$(CONFIG_MTD_AFS_PARTS) += afs.o obj-$(CONFIG_MTD_PARSER_TRX) += parser_trx.o
drivers/mtd/parsers/ofpart_core.c +6 -0
@@ -17,6 +17,7 @@#include <linux/mtd/partitions.h> #include "ofpart_bcm4908.h" +#include "ofpart_linksys_ns.h" struct fixed_partitions_quirks {int (*post_parse)(struct mtd_info *mtd,struct mtd_partition *parts,int nr_parts);
@@ -26,6 +27,10 @@ static struct fixed_partitions_quirks bcm4908_partitions_quirks = { .post_parse = bcm4908_partitions_post_parse, }; +static struct fixed_partitions_quirks linksys_ns_partitions_quirks = { + .post_parse = linksys_ns_partitions_post_parse, +}; +static const struct of_device_id parse_ofpart_match_table[];static bool node_has_compatible (struct device_node *pp)
@@ -167,6 +172,7 @@ static const struct of_device_id parse_ofpart_match_table[] = { { .compatible = "fixed-partitions" }, /* Customized */ { .compatible = "brcm,bcm4908-partitions", .data = &bcm4908_partitions_quirks, }, + { .compatible = "linksys,ns-partitions", .data = &linksys_ns_partitions_quirks, }, {}, };MODULE_DEVICE_TABLE (of, parse_ofpart_match_table);
drivers/mtd/parsers/ofpart_linksys_ns.c new file +50 -0
50 lines not on this page · raw message
drivers/mtd/parsers/ofpart_linksys_ns.h new file +18 -0
@@ -0,0 +1,18 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef __OFPART_LINKSYS_NS_H +#define __OFPART_LINKSYS_NS_H + +#ifdef CONFIG_MTD_OF_PARTS_LINKSYS_NS +int linksys_ns_partitions_post_parse (struct mtd_info *mtd, +struct mtd_partition *parts, +int nr_parts); +#else +static inline int linksys_ns_partitions_post_parse (struct mtd_info *mtd, +struct mtd_partition *parts, +int nr_parts) +{ +return -EOPNOTSUPP ; +} +#endif + +#endif
Signature · 1 line
2.26.2
Re: [PATCH 2/2] mtd: parsers: ofpart: support Linksys Northstar partitions
Quoted 6 lines · On Fri, 2021-03-12 at 13:49:19 UTC, =?utf-8?b?UmFmYcWCIE1pxYJlY2tp?= wrote:
From: Rafał Miłecki <[email protected]>
This allows extending ofpart parser with support for Linksys Northstar devices. That support uses recently added quirks mechanism.
Signed-off-by Rafał Miłecki <[email protected]>
Applied to https://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux.git mtd/next, thanks.
Miquel
Quoted 11 lines · Rafał Miłecki
From: Rafał Miłecki <[email protected]>
Linksys on Broadcom Northstar devices uses fixed flash layout with multiple firmware partitions.
Signed-off-by Rafał Miłecki <[email protected]>--- .../mtd/partitions/linksys,ns-partitions.yaml | 74 +++++++++++++++++++ 1 file changed, 74 insertions(+) create mode 100644 Documentation/devicetree/bindings/mtd/partitions/linksys,ns-partitions.yaml
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
Quoted 7 lines · On Fri, 2021-03-12 at 13:49:18 UTC, =?utf-8?b?UmFmYcWCIE1pxYJlY2tp?= wrote:
From: Rafał Miłecki <[email protected]>
Linksys on Broadcom Northstar devices uses fixed flash layout with multiple firmware partitions.
Signed-off-by Rafał Miłecki <[email protected]>Reviewed-by Rob Herring <[email protected]>
Applied to https://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux.git mtd/next, thanks.
Miquel