Skip to contentSkip to conversation

arm64: dts: qcom: sc7180: Disable the charger thermal zone on more trogdor boards

PATCH Superseded Matthias Kaehlcke 2 participants 10 messages Mar 12, 2021 – Mar 15, 2021

Subsystems (4)

v2 of 4 Superseded Latest is v4 →

lore
Share & tools
lore
#0 lore raw

v2 cover arm64: dts: qcom: sc7180: Disable the charger thermal zone on more trogdor boards

We already disabled the charger thermal zone for lazor to avoid bogus temperature readings from an unsupported thermistor. Some revisions of other trogdor boards that are added by Doug's 'arm64: dts: qcom: Update sc7180-trogdor variants from downstream' series have the same problem. Disable the charger thermal zone for them too.

This series is based on v2 of the 'arm64: dts: qcom: Update sc7180-trogdor variants from downstream' series
(https://patchwork.kernel.org/project/linux-arm-msm/list/?series=440315)

(no changes since v1)

Matthias Kaehlcke (3):
arm64: dts: qcom: sc7180: lazor: Simplify disabling of charger thermal
zone
arm64: dts: qcom: sc7180: Add pompom rev3
arm64: dts: qcom: sc7180: Add CoachZ rev3

 arch/arm64/boot/dts/qcom/Makefile             |  4 ++
 .../dts/qcom/sc7180-trogdor-coachz-r1.dts     |  9 +++++
 .../dts/qcom/sc7180-trogdor-coachz-r2-lte.dts |  4 +-
 .../dts/qcom/sc7180-trogdor-coachz-r2.dts     | 13 ++++++-
 .../dts/qcom/sc7180-trogdor-coachz-r3-lte.dts | 18 +++++++++
 .../dts/qcom/sc7180-trogdor-coachz-r3.dts     | 15 ++++++++
 .../boot/dts/qcom/sc7180-trogdor-lazor-r0.dts |  9 -----
 .../boot/dts/qcom/sc7180-trogdor-lazor-r1.dts |  9 -----
 .../boot/dts/qcom/sc7180-trogdor-lazor-r3.dts |  9 -----
 .../boot/dts/qcom/sc7180-trogdor-lazor.dtsi   |  9 +++++
 .../dts/qcom/sc7180-trogdor-pompom-r1.dts     | 12 ++++++
 .../dts/qcom/sc7180-trogdor-pompom-r2-lte.dts |  4 +-
 .../dts/qcom/sc7180-trogdor-pompom-r2.dts     | 38 +++++--------------
 .../dts/qcom/sc7180-trogdor-pompom-r3-lte.dts | 14 +++++++
 .../dts/qcom/sc7180-trogdor-pompom-r3.dts     | 15 ++++++++
 .../boot/dts/qcom/sc7180-trogdor-pompom.dtsi  | 31 +++++++++++++++
 16 files changed, 151 insertions(+), 62 deletions(-)
 create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r3-lte.dts
 create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r3.dts
 create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r3-lte.dts
 create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r3.dts
Signature · 1 line
2.31.0.rc2.261.g7f71774620-goog
#1 lore raw

PATCH v2 1/3 arm64: dts: qcom: sc7180: lazor: Simplify disabling of charger thermal zone

Commit f73558cc83d1 ("arm64: dts: qcom: sc7180: Disable charger thermal zone for lazor") disables the charger thermal zone for specific lazor revisions due to an unsupported thermistor type. The initial idea was to disable the thermal zone for older revisions and leave it enabled for newer ones that use a supported thermistor. Finally the thermistor won't be changed on newer revisions, hence the thermal zone should be disabled for all lazor (and limozeen) revisions. Instead of disabling it per revision do it once in the shared .dtsi for lazor.

---

Changes in v2:
- none

 arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r0.dts | 9 ---------
 arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1.dts | 9 ---------
 arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3.dts | 9 ---------
 arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi   | 9 +++++++++
 4 files changed, 9 insertions(+), 27 deletions(-)
arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r0.dts +0 -9
index 5c997cd90069..30e3e769d2b4 100644
@@ -14,15 +14,6 @@ / {
 	compatible = "google,lazor-rev0", "qcom,sc7180";
 };
 
-/*
- * Lazor is stuffed with a 47k NTC as charger thermistor which currently is
- * not supported by the PM6150 ADC driver. Disable the charger thermal zone
- * to avoid using bogus temperature values.
- */
-&charger_thermal {
-	status = "disabled";
-};
-
 &pp3300_hub {
 	/* pp3300_l7c is used to power the USB hub */
 	/delete-property/regulator-always-on;
arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1.dts +0 -9
index d9fbcc7bc5bd..c2ef06367baf 100644
@@ -14,15 +14,6 @@ / {
 	compatible = "google,lazor-rev1", "google,lazor-rev2", "qcom,sc7180";
 };
 
-/*
- * Lazor is stuffed with a 47k NTC as charger thermistor which currently is
- * not supported by the PM6150 ADC driver. Disable the charger thermal zone
- * to avoid using bogus temperature values.
- */
-&charger_thermal {
-	status = "disabled";
-};
-
 &pp3300_hub {
 	/* pp3300_l7c is used to power the USB hub */
 	/delete-property/regulator-always-on;
arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3.dts +0 -9
index ea8c2ee09741..b474df47cd70 100644
@@ -14,12 +14,3 @@ / {
 	model = "Google Lazor (rev3+)";
 	compatible = "google,lazor", "qcom,sc7180";
 };
-
-/*
- * Lazor is stuffed with a 47k NTC as charger thermistor which currently is
- * not supported by the PM6150 ADC driver. Disable the charger thermal zone
- * to avoid using bogus temperature values.
- */
-&charger_thermal {
-	status = "disabled";
-};
arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi +9 -0
index 6b10b96173e8..6d540321b4a5 100644
@@ -41,6 +41,15 @@ ap_ts: touchscreen@10 {
 	};
 };
 
+/*
+ * Lazor is stuffed with a 47k NTC as charger thermistor which currently is
+ * not supported by the PM6150 ADC driver. Disable the charger thermal zone
+ * to avoid using bogus temperature values.
+ */
+&charger_thermal {
+	status = "disabled";
+};
+
 &panel {
 	compatible = "boe,nv133fhm-n62";
 };
Signature · 1 line
2.31.0.rc2.261.g7f71774620-goog
Reviewed-by on v2 1/3
#2 lore raw

Re: [PATCH v2 1/3] arm64: dts: qcom: sc7180: lazor: Simplify disabling of charger thermal zone

Hi,

Quoted 86 lines · Matthias Kaehlcke

Commit f73558cc83d1 ("arm64: dts: qcom: sc7180: Disable charger thermal zone for lazor") disables the charger thermal zone for specific lazor revisions due to an unsupported thermistor type. The initial idea was to disable the thermal zone for older revisions and leave it enabled for newer ones that use a supported thermistor. Finally the thermistor won't be changed on newer revisions, hence the thermal zone should be disabled for all lazor (and limozeen) revisions. Instead of disabling it per revision do it once in the shared .dtsi for lazor.

---

Changes in v2:
- none

 arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r0.dts | 9 ---------
 arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1.dts | 9 ---------
 arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3.dts | 9 ---------
 arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi   | 9 +++++++++
 4 files changed, 9 insertions(+), 27 deletions(-)
arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r0.dts +0 -9
index 5c997cd90069..30e3e769d2b4 100644
@@ -14,15 +14,6 @@ / {
        compatible = "google,lazor-rev0", "qcom,sc7180";
 };
 
-/*
- * Lazor is stuffed with a 47k NTC as charger thermistor which currently is
- * not supported by the PM6150 ADC driver. Disable the charger thermal zone
- * to avoid using bogus temperature values.
- */
-&charger_thermal {
-       status = "disabled";
-};
-
 &pp3300_hub {
        /* pp3300_l7c is used to power the USB hub */
        /delete-property/regulator-always-on;
arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1.dts +0 -9
index d9fbcc7bc5bd..c2ef06367baf 100644
@@ -14,15 +14,6 @@ / {
        compatible = "google,lazor-rev1", "google,lazor-rev2", "qcom,sc7180";
 };
 
-/*
- * Lazor is stuffed with a 47k NTC as charger thermistor which currently is
- * not supported by the PM6150 ADC driver. Disable the charger thermal zone
- * to avoid using bogus temperature values.
- */
-&charger_thermal {
-       status = "disabled";
-};
-
 &pp3300_hub {
        /* pp3300_l7c is used to power the USB hub */
        /delete-property/regulator-always-on;
arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3.dts +0 -9
index ea8c2ee09741..b474df47cd70 100644
@@ -14,12 +14,3 @@ / {
        model = "Google Lazor (rev3+)";
        compatible = "google,lazor", "qcom,sc7180";
 };
-
-/*
- * Lazor is stuffed with a 47k NTC as charger thermistor which currently is
- * not supported by the PM6150 ADC driver. Disable the charger thermal zone
- * to avoid using bogus temperature values.
- */
-&charger_thermal {
-       status = "disabled";
-};
arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi +0 -0
index 6b10b96173e8..6d540321b4a5 100644
@@ -41,6 +41,15 @@ ap_ts: touchscreen@10 {
        };

arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi ap_ts: touchscreen@10 { · line 51

Quoted 10 lines
arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi +8 -0
 };
 
+/*
+ * Lazor is stuffed with a 47k NTC as charger thermistor which currently is
+ * not supported by the PM6150 ADC driver. Disable the charger thermal zone
+ * to avoid using bogus temperature values.
+ */
+&charger_thermal {
+       status = "disabled";
+};

So this always confuses me too, but the sort order is wrong. :(

While it _looks_like the node above you is "ap_ts", I believe the convention for sorting is not to use labels added in this file. Yeah, we gotta document this somewhere. Thus, this node should be sorted as "charger_thermal" (using a label not defined in this file) and the node above should be sorted as "touchscreen@10" and thus we should go above it.

In general I think the reason we tend to use the node name and not any labels is that it keeps us from having to redo the sort ordering if we give something a new label. It also helps keep the i2c busses together, the SPI busses together, etc.

That's just a sort order nit, though, so:

-Doug

#3 lore raw

Re: [PATCH v2 1/3] arm64: dts: qcom: sc7180: lazor: Simplify disabling of charger thermal zone

Quoted 102 lines · Doug Anderson

Hi,

Quoted 86 lines · Matthias Kaehlcke

Commit f73558cc83d1 ("arm64: dts: qcom: sc7180: Disable charger thermal zone for lazor") disables the charger thermal zone for specific lazor revisions due to an unsupported thermistor type. The initial idea was to disable the thermal zone for older revisions and leave it enabled for newer ones that use a supported thermistor. Finally the thermistor won't be changed on newer revisions, hence the thermal zone should be disabled for all lazor (and limozeen) revisions. Instead of disabling it per revision do it once in the shared .dtsi for lazor.

---

Changes in v2:
- none

 arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r0.dts | 9 ---------
 arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1.dts | 9 ---------
 arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3.dts | 9 ---------
 arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi   | 9 +++++++++
 4 files changed, 9 insertions(+), 27 deletions(-)
arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r0.dts +0 -9
index 5c997cd90069..30e3e769d2b4 100644
@@ -14,15 +14,6 @@ / {
        compatible = "google,lazor-rev0", "qcom,sc7180";
 };
 
-/*
- * Lazor is stuffed with a 47k NTC as charger thermistor which currently is
- * not supported by the PM6150 ADC driver. Disable the charger thermal zone
- * to avoid using bogus temperature values.
- */
-&charger_thermal {
-       status = "disabled";
-};
-
 &pp3300_hub {
        /* pp3300_l7c is used to power the USB hub */
        /delete-property/regulator-always-on;
arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1.dts +0 -9
index d9fbcc7bc5bd..c2ef06367baf 100644
@@ -14,15 +14,6 @@ / {
        compatible = "google,lazor-rev1", "google,lazor-rev2", "qcom,sc7180";
 };
 
-/*
- * Lazor is stuffed with a 47k NTC as charger thermistor which currently is
- * not supported by the PM6150 ADC driver. Disable the charger thermal zone
- * to avoid using bogus temperature values.
- */
-&charger_thermal {
-       status = "disabled";
-};
-
 &pp3300_hub {
        /* pp3300_l7c is used to power the USB hub */
        /delete-property/regulator-always-on;
arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3.dts +0 -9
index ea8c2ee09741..b474df47cd70 100644
@@ -14,12 +14,3 @@ / {
        model = "Google Lazor (rev3+)";
        compatible = "google,lazor", "qcom,sc7180";
 };
-
-/*
- * Lazor is stuffed with a 47k NTC as charger thermistor which currently is
- * not supported by the PM6150 ADC driver. Disable the charger thermal zone
- * to avoid using bogus temperature values.
- */
-&charger_thermal {
-       status = "disabled";
-};
arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi +0 -0
index 6b10b96173e8..6d540321b4a5 100644
@@ -41,6 +41,15 @@ ap_ts: touchscreen@10 {
        };

arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi ap_ts: touchscreen@10 { · line 51

Quoted 10 lines
arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi +8 -0
 };
 
+/*
+ * Lazor is stuffed with a 47k NTC as charger thermistor which currently is
+ * not supported by the PM6150 ADC driver. Disable the charger thermal zone
+ * to avoid using bogus temperature values.
+ */
+&charger_thermal {
+       status = "disabled";
+};

So this always confuses me too, but the sort order is wrong. :(

Quoted 6 lines

While it _looks_like the node above you is "ap_ts", I believe the convention for sorting is not to use labels added in this file. Yeah, we gotta document this somewhere. Thus, this node should be sorted as "charger_thermal" (using a label not defined in this file) and the node above should be sorted as "touchscreen@10" and thus we should go above it.

"ap_ts" is a sub-node of "ap_ts_pen_1v8" (aka "i2c4"), so I think it is irrelevant here. However IIUC the sort order should still change, since "charger_thermal" should be before "i2c4" (ignoring "ap_ts_pen_1v8" defined in this file).

Quoted 4 lines

In general I think the reason we tend to use the node name and not any labels is that it keeps us from having to redo the sort ordering if we give something a new label. It also helps keep the i2c busses together, the SPI busses together, etc.

Yeah, at least for the busses it makes sense. There could also be conflicts for nodes with multiple labels, though one could use the convention of using the first label for sorting.

#4 lore raw

PATCH v2 2/3 arm64: dts: qcom: sc7180: Add pompom rev3

In reply to Matthias Kaehlcke

The only kernel visible change with respect to rev2 is that pompom rev3 changed the charger thermistor from a 47k to a 100k NTC to use a thermistor which is supported by the PM6150 ADC driver.

Disable the charger thermal zone for pompom rev1 and rev2 to avoid the use of bogus temperature values from the unsupported thermistor.

---

Changes in v2:
- moved keyboard definition to sc7180-trogdor-pompom.dtsi instead of duplicating it, use cros-ec keyboard for rev1
- squashed with 'arm64: dts: qcom: sc7180: pompom: Disable charger thermal zone for rev1 and rev2'

 arch/arm64/boot/dts/qcom/Makefile             |  2 +
 .../dts/qcom/sc7180-trogdor-pompom-r1.dts     | 12 ++++++
 .../dts/qcom/sc7180-trogdor-pompom-r2-lte.dts |  4 +-
 .../dts/qcom/sc7180-trogdor-pompom-r2.dts     | 38 +++++--------------
 .../dts/qcom/sc7180-trogdor-pompom-r3-lte.dts | 14 +++++++
 .../dts/qcom/sc7180-trogdor-pompom-r3.dts     | 15 ++++++++
 .../boot/dts/qcom/sc7180-trogdor-pompom.dtsi  | 31 +++++++++++++++
 7 files changed, 85 insertions(+), 31 deletions(-)
 create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r3-lte.dts
 create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r3.dts
arch/arm64/boot/dts/qcom/Makefile +2 -0
index a81966d59cf7..11aa83ca798f 100644
@@ -49,6 +49,8 @@ dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-pompom-r1.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-pompom-r1-lte.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-pompom-r2.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-pompom-r2-lte.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-pompom-r3.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-pompom-r3-lte.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-r1.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-r1-lte.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm630-sony-xperia-ganges-kirin.dtb
arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r1.dts +12 -0
index e720e7bd0d70..7f87877408c5 100644
@@ -9,11 +9,23 @@
 
 #include "sc7180-trogdor-pompom.dtsi"
 
+/delete-node/ keyboard_controller;
+#include <arm/cros-ec-keyboard.dtsi>
+
 / {
 	model = "Google Pompom (rev1)";
 	compatible = "google,pompom-rev1", "qcom,sc7180";
 };
 
+/*
+ * Pompom rev1 is stuffed with a 47k NTC as charger thermistor which currently
+ * is not supported by the PM6150 ADC driver. Disable the charger thermal zone
+ * to avoid using bogus temperature values.
+ */
+&charger_thermal {
+	status = "disabled";
+};
+
 &pp3300_hub {
 	/* pp3300_l7c is used to power the USB hub */
 	/delete-property/regulator-always-on;
arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r2-lte.dts +2 -2
index 791d496ad046..00e187c08eb9 100644
@@ -9,6 +9,6 @@
 #include "sc7180-trogdor-lte-sku.dtsi"
 
 / {
-	model = "Google Pompom (rev2+) with LTE";
-	compatible = "google,pompom-sku0", "qcom,sc7180";
+	model = "Google Pompom (rev2) with LTE";
+	compatible = "google,pompom-rev2-sku0", "qcom,sc7180";
 };
arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r2.dts +9 -29
index 984d7337da78..4f32e6733f4c 100644
@@ -10,35 +10,15 @@
 #include "sc7180-trogdor-pompom.dtsi"
 
 / {
-	model = "Google Pompom (rev2+)";
-	compatible = "google,pompom", "qcom,sc7180";
+	model = "Google Pompom (rev2)";
+	compatible = "google,pompom-rev2", "qcom,sc7180";
 };
 
-&keyboard_controller {
-	function-row-physmap = <
-		MATRIX_KEY(0x00, 0x02, 0)	/* T1 */
-		MATRIX_KEY(0x03, 0x02, 0)	/* T2 */
-		MATRIX_KEY(0x02, 0x02, 0)	/* T3 */
-		MATRIX_KEY(0x01, 0x02, 0)	/* T4 */
-		MATRIX_KEY(0x03, 0x04, 0)	/* T5 */
-		MATRIX_KEY(0x02, 0x04, 0)	/* T6 */
-		MATRIX_KEY(0x01, 0x04, 0)	/* T7 */
-		MATRIX_KEY(0x02, 0x09, 0)	/* T8 */
-		MATRIX_KEY(0x01, 0x09, 0)	/* T9 */
-		MATRIX_KEY(0x00, 0x04, 0)	/* T10 */
-	>;
-	linux,keymap = <
-		MATRIX_KEY(0x00, 0x02, KEY_BACK)
-		MATRIX_KEY(0x03, 0x02, KEY_REFRESH)
-		MATRIX_KEY(0x02, 0x02, KEY_ZOOM)
-		MATRIX_KEY(0x01, 0x02, KEY_SCALE)
-		MATRIX_KEY(0x03, 0x04, KEY_SYSRQ)
-		MATRIX_KEY(0x02, 0x04, KEY_BRIGHTNESSDOWN)
-		MATRIX_KEY(0x01, 0x04, KEY_BRIGHTNESSUP)
-		MATRIX_KEY(0x02, 0x09, KEY_MUTE)
-		MATRIX_KEY(0x01, 0x09, KEY_VOLUMEDOWN)
-		MATRIX_KEY(0x00, 0x04, KEY_VOLUMEUP)
-
-		CROS_STD_MAIN_KEYMAP
-	>;
+/*
+ * Pompom rev2 is stuffed with a 47k NTC as charger thermistor which currently
+ * is not supported by the PM6150 ADC driver. Disable the charger thermal zone
+ * to avoid using bogus temperature values.
+ */
+&charger_thermal {
+	status = "disabled";
 };
arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r3-lte.dts new file +14 -0
new file mode 100644
index 000000000000..e90b73c353bb
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Pompom board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ */
+
+#include "sc7180-trogdor-pompom-r3.dts"
+#include "sc7180-trogdor-lte-sku.dtsi"
+
+/ {
+	model = "Google Pompom (rev3+) with LTE";
+	compatible = "google,pompom-sku0", "qcom,sc7180";
+};
arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r3.dts new file +15 -0
new file mode 100644
index 000000000000..f8aac63a53ef
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Pompom board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7180-trogdor-pompom.dtsi"
+
+/ {
+	model = "Google Pompom (rev3+)";
+	compatible = "google,pompom", "qcom,sc7180";
+};
arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi +31 -0
index d253a08f6fc8..1a51ebfe8fb4 100644
@@ -107,6 +107,37 @@ ap_ts: touchscreen@10 {
 	};
 };
 
+&keyboard_controller {
+	function-row-physmap = <
+		MATRIX_KEY(0x00, 0x02, 0)	/* T1 */
+		MATRIX_KEY(0x03, 0x02, 0)	/* T2 */
+		MATRIX_KEY(0x02, 0x02, 0)	/* T3 */
+		MATRIX_KEY(0x01, 0x02, 0)	/* T4 */
+		MATRIX_KEY(0x03, 0x04, 0)	/* T5 */
+		MATRIX_KEY(0x02, 0x04, 0)	/* T6 */
+		MATRIX_KEY(0x01, 0x04, 0)	/* T7 */
+		MATRIX_KEY(0x02, 0x09, 0)	/* T8 */
+		MATRIX_KEY(0x01, 0x09, 0)	/* T9 */
+		MATRIX_KEY(0x00, 0x04, 0)	/* T10 */
+	>;
+	linux,keymap = <
+		MATRIX_KEY(0x00, 0x02, KEY_BACK)
+		MATRIX_KEY(0x03, 0x02, KEY_REFRESH)
+		MATRIX_KEY(0x02, 0x02, KEY_ZOOM)
+		MATRIX_KEY(0x01, 0x02, KEY_SCALE)
+		MATRIX_KEY(0x03, 0x04, KEY_SYSRQ)
+		MATRIX_KEY(0x02, 0x04, KEY_BRIGHTNESSDOWN)
+		MATRIX_KEY(0x01, 0x04, KEY_BRIGHTNESSUP)
+		MATRIX_KEY(0x02, 0x09, KEY_MUTE)
+		MATRIX_KEY(0x01, 0x09, KEY_VOLUMEDOWN)
+		MATRIX_KEY(0x00, 0x04, KEY_VOLUMEUP)
+
+		MATRIX_KEY(0x03, 0x09, KEY_SLEEP)	/* LOCK key */
+
+		CROS_STD_MAIN_KEYMAP
+	>;
+};
+
 &panel {
 	compatible = "kingdisplay,kd116n21-30nv-a010";
 };
Signature · 1 line
2.31.0.rc2.261.g7f71774620-goog
#5 lore raw

Re: [PATCH v2 2/3] arm64: dts: qcom: sc7180: Add pompom rev3

Hi,

Quoted 4 lines · Matthias Kaehlcke
arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi +3 -0
+       linux,keymap = <
+               MATRIX_KEY(0x00, 0x02, KEY_BACK)
+               MATRIX_KEY(0x03, 0x02, KEY_REFRESH)

arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi ap_ts: touchscreen@10 { · line 135

Quoted 10 lines
arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi +10 -0
+               MATRIX_KEY(0x02, 0x02, KEY_ZOOM)
+               MATRIX_KEY(0x01, 0x02, KEY_SCALE)
+               MATRIX_KEY(0x03, 0x04, KEY_SYSRQ)
+               MATRIX_KEY(0x02, 0x04, KEY_BRIGHTNESSDOWN)
+               MATRIX_KEY(0x01, 0x04, KEY_BRIGHTNESSUP)
+               MATRIX_KEY(0x02, 0x09, KEY_MUTE)
+               MATRIX_KEY(0x01, 0x09, KEY_VOLUMEDOWN)
+               MATRIX_KEY(0x00, 0x04, KEY_VOLUMEUP)
+
+               MATRIX_KEY(0x03, 0x09, KEY_SLEEP)       /* LOCK key */

I don't think you want the LOCK key. See <https://crrev.com/c/2719075>

-Doug

#6 lore raw

Re: [PATCH v2 2/3] arm64: dts: qcom: sc7180: Add pompom rev3

Quoted 18 lines · Doug Anderson

Hi,

Quoted 4 lines · Matthias Kaehlcke
arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi +3 -0
+       linux,keymap = <
+               MATRIX_KEY(0x00, 0x02, KEY_BACK)
+               MATRIX_KEY(0x03, 0x02, KEY_REFRESH)

arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi ap_ts: touchscreen@10 { · line 135

Quoted 10 lines
arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi +10 -0
+               MATRIX_KEY(0x02, 0x02, KEY_ZOOM)
+               MATRIX_KEY(0x01, 0x02, KEY_SCALE)
+               MATRIX_KEY(0x03, 0x04, KEY_SYSRQ)
+               MATRIX_KEY(0x02, 0x04, KEY_BRIGHTNESSDOWN)
+               MATRIX_KEY(0x01, 0x04, KEY_BRIGHTNESSUP)
+               MATRIX_KEY(0x02, 0x09, KEY_MUTE)
+               MATRIX_KEY(0x01, 0x09, KEY_VOLUMEDOWN)
+               MATRIX_KEY(0x00, 0x04, KEY_VOLUMEUP)
+
+               MATRIX_KEY(0x03, 0x09, KEY_SLEEP)       /* LOCK key */
Quoted 1 line

I don't think you want the LOCK key. See <https://crrev.com/c/2719075>

ack, thanks!

#7 lore raw

PATCH v2 3/3 arm64: dts: qcom: sc7180: Add CoachZ rev3

In reply to Matthias Kaehlcke

CoachZ rev3 uses a 100k NTC thermistor for the charger temperatures, instead of the 47k NTC that is stuffed in earlier revisions. Add .dts files for rev3.

The 47k NTC currently isn't supported by the PM6150 ADC driver. Disable the charger thermal zone for rev1 and rev2 to avoid the use of bogus temperature values.

---

Changes in v2:
- added CoachZ rev3
- updated subject and commit message

 arch/arm64/boot/dts/qcom/Makefile              |  2 ++
 .../boot/dts/qcom/sc7180-trogdor-coachz-r1.dts |  9 +++++++++
 .../dts/qcom/sc7180-trogdor-coachz-r2-lte.dts  |  4 ++--
 .../boot/dts/qcom/sc7180-trogdor-coachz-r2.dts | 13 +++++++++++--
 .../dts/qcom/sc7180-trogdor-coachz-r3-lte.dts  | 18 ++++++++++++++++++
 .../boot/dts/qcom/sc7180-trogdor-coachz-r3.dts | 15 +++++++++++++++
 6 files changed, 57 insertions(+), 4 deletions(-)
 create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r3-lte.dts
 create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r3.dts
arch/arm64/boot/dts/qcom/Makefile +2 -0
index 11aa83ca798f..ffb6d662754a 100644
@@ -35,6 +35,8 @@ dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-coachz-r1.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-coachz-r1-lte.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-coachz-r2.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-coachz-r2-lte.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-coachz-r3.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-coachz-r3-lte.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-lazor-r0.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-lazor-r1.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-lazor-r1-kb.dtb
arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r1.dts +9 -0
index 86619f6c1134..c6b078e70d31 100644
@@ -14,6 +14,15 @@ / {
 	compatible = "google,coachz-rev1", "qcom,sc7180";
 };
 
+/*
+ * CoachZ rev1 is stuffed with a 47k NTC as charger thermistor which currently
+ * is not supported by the PM6150 ADC driver. Disable the charger thermal zone
+ * to avoid using bogus temperature values.
+ */
+&charger_thermal {
+	status = "disabled";
+};
+
 &tlmm {
 	gpio-line-names = "HUB_RST_L",
 			  "AP_RAM_ID0",
arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r2-lte.dts +2 -2
index 6e7745801fae..5d92309af091 100644
@@ -9,8 +9,8 @@
 #include "sc7180-trogdor-lte-sku.dtsi"
 
 / {
-	model = "Google CoachZ (rev2+) with LTE";
-	compatible = "google,coachz-sku0", "qcom,sc7180";
+	model = "Google CoachZ (rev2) with LTE";
+	compatible = "google,coachz-rev2-sku0", "qcom,sc7180";
 };
 
 &cros_ec_proximity {
arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r2.dts +11 -2
index 4f69b6ba299f..6ce2b1534a68 100644
@@ -10,6 +10,15 @@
 #include "sc7180-trogdor-coachz.dtsi"
 
 / {
-	model = "Google CoachZ (rev2+)";
-	compatible = "google,coachz", "qcom,sc7180";
+	model = "Google CoachZ (rev2)";
+	compatible = "google,coachz-rev2", "qcom,sc7180";
+};
+
+/*
+ * CoachZ rev2 is stuffed with a 47k NTC as charger thermistor which currently
+ * is not supported by the PM6150 ADC driver. Disable the charger thermal zone
+ * to avoid using bogus temperature values.
+ */
+&charger_thermal {
+	status = "disabled";
 };
arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r3-lte.dts new file +18 -0
new file mode 100644
index 000000000000..d23409034e8c
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google CoachZ board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ */
+
+#include "sc7180-trogdor-coachz-r3.dts"
+#include "sc7180-trogdor-lte-sku.dtsi"
+
+/ {
+	model = "Google CoachZ (rev3+) with LTE";
+	compatible = "google,coachz-sku0", "qcom,sc7180";
+};
+
+&cros_ec_proximity {
+	label = "proximity-wifi-lte";
+};
arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r3.dts new file +15 -0
new file mode 100644
index 000000000000..a02d2d57c78c
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google CoachZ board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7180-trogdor-coachz.dtsi"
+
+/ {
+	model = "Google CoachZ (rev3+)";
+	compatible = "google,coachz", "qcom,sc7180";
+};
Signature · 1 line
2.31.0.rc2.261.g7f71774620-goog
#8 lore raw

Re: [PATCH v2 3/3] arm64: dts: qcom: sc7180: Add CoachZ rev3

Hi,

Quoted 16 lines · Matthias Kaehlcke

CoachZ rev3 uses a 100k NTC thermistor for the charger temperatures, instead of the 47k NTC that is stuffed in earlier revisions. Add .dts files for rev3.

The 47k NTC currently isn't supported by the PM6150 ADC driver. Disable the charger thermal zone for rev1 and rev2 to avoid the use of bogus temperature values.

---

Changes in v2:
- added CoachZ rev3
- updated subject and commit message

Quoted 7 lines
 arch/arm64/boot/dts/qcom/Makefile              |  2 ++
 .../boot/dts/qcom/sc7180-trogdor-coachz-r1.dts |  9 +++++++++
 .../dts/qcom/sc7180-trogdor-coachz-r2-lte.dts  |  4 ++--
 .../boot/dts/qcom/sc7180-trogdor-coachz-r2.dts | 13 +++++++++++--
 .../dts/qcom/sc7180-trogdor-coachz-r3-lte.dts  | 18 ++++++++++++++++++
 .../boot/dts/qcom/sc7180-trogdor-coachz-r3.dts | 15 +++++++++++++++
 6 files changed, 57 insertions(+), 4 deletions(-)

So what you have here is good and we could land it. Feel free to add my Reviewed-by tag if you want.

...but I want to propose an alternative. It turns out that these days coachz-r1 and coachz-r2 are actually the same. The only reason both exist is because <https://crrev.com/c/2733863> ("CHROMIUM: arm64: dts:
qcom: sc7180: add dmic_clk_en back") wasn't the proper inverse of
<https://crrev.com/c/2596726> ("CHROMIUM: arm64: dts: qcom: sc7180:
remove dmic_clk_en").

It sorta squashes two changes into one, but if you combined your change with one that folded "-r1" into "-r2" it would actually make a smaller / easier to understand change, essentially, it would be:
- just a rename of the "-r2" file to be "-r3"
- add "-rev2" into the list of compatibles in "-r1" file.
- add the "disable" into the "-r1" file.

Anyway, I'll leave it up to you.

-Doug

#9 lore raw

Re: [PATCH v2 3/3] arm64: dts: qcom: sc7180: Add CoachZ rev3

Quoted 37 lines · Doug Anderson

Hi,

Quoted 16 lines · Matthias Kaehlcke

CoachZ rev3 uses a 100k NTC thermistor for the charger temperatures, instead of the 47k NTC that is stuffed in earlier revisions. Add .dts files for rev3.

The 47k NTC currently isn't supported by the PM6150 ADC driver. Disable the charger thermal zone for rev1 and rev2 to avoid the use of bogus temperature values.

---

Changes in v2:
- added CoachZ rev3
- updated subject and commit message

Quoted 7 lines
 arch/arm64/boot/dts/qcom/Makefile              |  2 ++
 .../boot/dts/qcom/sc7180-trogdor-coachz-r1.dts |  9 +++++++++
 .../dts/qcom/sc7180-trogdor-coachz-r2-lte.dts  |  4 ++--
 .../boot/dts/qcom/sc7180-trogdor-coachz-r2.dts | 13 +++++++++++--
 .../dts/qcom/sc7180-trogdor-coachz-r3-lte.dts  | 18 ++++++++++++++++++
 .../boot/dts/qcom/sc7180-trogdor-coachz-r3.dts | 15 +++++++++++++++
 6 files changed, 57 insertions(+), 4 deletions(-)

So what you have here is good and we could land it. Feel free to add my Reviewed-by tag if you want.

...but I want to propose an alternative. It turns out that these days coachz-r1 and coachz-r2 are actually the same. The only reason both exist is because <https://crrev.com/c/2733863> ("CHROMIUM: arm64: dts:
qcom: sc7180: add dmic_clk_en back") wasn't the proper inverse of
<https://crrev.com/c/2596726> ("CHROMIUM: arm64: dts: qcom: sc7180:
remove dmic_clk_en").

Quoted 6 lines

It sorta squashes two changes into one, but if you combined your change with one that folded "-r1" into "-r2" it would actually make a smaller / easier to understand change, essentially, it would be:
- just a rename of the "-r2" file to be "-r3"
- add "-rev2" into the list of compatibles in "-r1" file.
- add the "disable" into the "-r1" file.

I agree, if rev1 and rev2 are the same in terms of the DT they should use the same file(s).