usb: gadget: pch_udc: Drop unneeded cpu_to_le32() call

index a3c1fc924268..2e2dca391007 100644
@@ -1756,7 +1756,7 @@ static struct usb_request *pch_udc_alloc_request(struct usb_ep *usbep,
 	}
 	/* prevent from using desc. - set HOST BUSY */
 	dma_desc->status |= PCH_UDC_BS_HST_BSY;
-	dma_desc->dataptr = cpu_to_le32(DMA_ADDR_INVALID);
+	dma_desc->dataptr = DMA_ADDR_INVALID;
 	req->td_data = dma_desc;
 	req->td_data_last = dma_desc;
 	req->chain_len = 1;

index 2e2dca391007..5bb83a2705ad 100644
@@ -2298,6 +2298,21 @@ static void pch_udc_svc_data_out(struct pch_udc_dev *dev, int ep_num)
 		pch_udc_set_dma(dev, DMA_DIR_RX);
 }
 
+static int pch_udc_gadget_setup(struct pch_udc_dev *dev)
+	__must_hold(&dev->lock)
+{
+	int rc;
+
+	/* In some cases we can get an interrupt before driver gets setup */
+	if (!dev->driver)
+		return -ESHUTDOWN;
+
+	spin_unlock(&dev->lock);
+	rc = dev->driver->setup(&dev->gadget, &dev->setup_data);
+	spin_lock(&dev->lock);
+	return rc;
+}
+
 /**
  * pch_udc_svc_control_in() - Handle Control IN endpoint interrupts
  * @dev:	Reference to the device structure

@@ -2369,15 +2384,12 @@ static void pch_udc_svc_control_out(struct pch_udc_dev *dev)
 			dev->gadget.ep0 = &dev->ep[UDC_EP0IN_IDX].ep;
 		else /* OUT */
 			dev->gadget.ep0 = &ep->ep;
-		spin_lock(&dev->lock);
 		/* If Mass storage Reset */
 		if ((dev->setup_data.bRequestType == 0x21) &&
 		    (dev->setup_data.bRequest == 0xFF))
 			dev->prot_stall = 0;
 		/* call gadget with setup data received */
-		setup_supported = dev->driver->setup(&dev->gadget,
-						     &dev->setup_data);
-		spin_unlock(&dev->lock);
+		setup_supported = pch_udc_gadget_setup(dev);
 
 		if (dev->setup_data.bRequestType & USB_DIR_IN) {
 			ep->td_data->status = (ep->td_data->status &

@@ -2625,9 +2637,7 @@ static void pch_udc_svc_intf_interrupt(struct pch_udc_dev *dev)
 		dev->ep[i].halted = 0;
 	}
 	dev->stall = 0;
-	spin_unlock(&dev->lock);
-	dev->driver->setup(&dev->gadget, &dev->setup_data);
-	spin_lock(&dev->lock);
+	pch_udc_gadget_setup(dev);
 }
 
 /**

@@ -2662,9 +2672,7 @@ static void pch_udc_svc_cfg_interrupt(struct pch_udc_dev *dev)
 	dev->stall = 0;
 
 	/* call gadget zero with setup data received */
-	spin_unlock(&dev->lock);
-	dev->driver->setup(&dev->gadget, &dev->setup_data);
-	spin_lock(&dev->lock);
+	pch_udc_gadget_setup(dev);
 }
 
 /**

index 5bb83a2705ad..5421075df01c 100644
@@ -596,18 +596,22 @@ static void pch_udc_reconnect(struct pch_udc_dev *dev)
 static inline void pch_udc_vbus_session(struct pch_udc_dev *dev,
 					  int is_active)
 {
+	unsigned long		iflags;
+
+	spin_lock_irqsave(&dev->lock, iflags);
 	if (is_active) {
 		pch_udc_reconnect(dev);
 		dev->vbus_session = 1;
 	} else {
 		if (dev->driver && dev->driver->disconnect) {
-			spin_lock(&dev->lock);
+			spin_unlock_irqrestore(&dev->lock, iflags);
 			dev->driver->disconnect(&dev->gadget);
-			spin_unlock(&dev->lock);
+			spin_lock_irqsave(&dev->lock, iflags);
 		}
 		pch_udc_set_disconnect(dev);
 		dev->vbus_session = 0;
 	}
+	spin_unlock_irqrestore(&dev->lock, iflags);
 }
 
 /**

@@ -1166,20 +1170,25 @@ static int pch_udc_pcd_selfpowered(struct usb_gadget *gadget, int value)
 static int pch_udc_pcd_pullup(struct usb_gadget *gadget, int is_on)
 {
 	struct pch_udc_dev	*dev;
+	unsigned long		iflags;
 
 	if (!gadget)
 		return -EINVAL;
+
 	dev = container_of(gadget, struct pch_udc_dev, gadget);
+
+	spin_lock_irqsave(&dev->lock, iflags);
 	if (is_on) {
 		pch_udc_reconnect(dev);
 	} else {
 		if (dev->driver && dev->driver->disconnect) {
-			spin_lock(&dev->lock);
+			spin_unlock_irqrestore(&dev->lock, iflags);
 			dev->driver->disconnect(&dev->gadget);
-			spin_unlock(&dev->lock);
+			spin_lock_irqsave(&dev->lock, iflags);
 		}
 		pch_udc_set_disconnect(dev);
 	}
+	spin_unlock_irqrestore(&dev->lock, iflags);
 
 	return 0;
 }

index 5421075df01c..984c9299d2c6 100644
@@ -563,12 +563,13 @@ static void pch_udc_clear_disconnect(struct pch_udc_dev *dev)
 	pch_udc_bit_clr(dev, UDC_DEVCTL_ADDR, UDC_DEVCTL_RES);
 }
 
+static void pch_udc_init(struct pch_udc_dev *dev);
+
 /**
  * pch_udc_reconnect() - This API initializes usb device controller,
  *						and clear the disconnect status.
  * @dev:		Reference to pch_udc_regs structure
  */
-static void pch_udc_init(struct pch_udc_dev *dev);
 static void pch_udc_reconnect(struct pch_udc_dev *dev)
 {
 	pch_udc_init(dev);

index 984c9299d2c6..1c8c1070eb28 100644
@@ -1370,6 +1370,7 @@ static irqreturn_t pch_vbus_gpio_irq(int irq, void *data)
  */
 static int pch_vbus_gpio_init(struct pch_udc_dev *dev)
 {
+	struct device *d = &dev->pdev->dev;
 	int err;
 	int irq_num = 0;
 	struct gpio_desc *gpiod;

@@ -1378,7 +1379,7 @@ static int pch_vbus_gpio_init(struct pch_udc_dev *dev)
 	dev->vbus_gpio.intr = 0;
 
 	/* Retrieve the GPIO line from the USB gadget device */
-	gpiod = devm_gpiod_get(dev->gadget.dev.parent, NULL, GPIOD_IN);
+	gpiod = devm_gpiod_get(d, NULL, GPIOD_IN);
 	if (IS_ERR(gpiod))
 		return PTR_ERR(gpiod);
 	gpiod_set_consumer_name(gpiod, "pch_vbus");

@@ -3081,6 +3082,7 @@ static int pch_udc_probe(struct pci_dev *pdev,
 	if (retval)
 		return retval;
 
+	dev->pdev = pdev;
 	pci_set_drvdata(pdev, dev);
 
 	/* Determine BAR based on PCI ID */

@@ -3122,7 +3124,6 @@ static int pch_udc_probe(struct pci_dev *pdev,
 
 	/* device struct setup */
 	spin_lock_init(&dev->lock);
-	dev->pdev = pdev;
 	dev->gadget.ops = &pch_udc_ops;
 
 	retval = init_dma_pools(dev);

index 1c8c1070eb28..e5f3c6157d53 100644
@@ -7,12 +7,14 @@
 #include <linux/module.h>
 #include <linux/pci.h>
 #include <linux/delay.h>
+#include <linux/dmi.h>
 #include <linux/errno.h>
+#include <linux/gpio/consumer.h>
+#include <linux/gpio/machine.h>
 #include <linux/list.h>
 #include <linux/interrupt.h>
 #include <linux/usb/ch9.h>
 #include <linux/usb/gadget.h>
-#include <linux/gpio/consumer.h>
 #include <linux/irq.h>
 
 #define PCH_VBUS_PERIOD		3000	/* VBUS polling period (msec) */

@@ -1360,6 +1362,43 @@ static irqreturn_t pch_vbus_gpio_irq(int irq, void *data)
 	return IRQ_HANDLED;
 }
 
+static struct gpiod_lookup_table minnowboard_udc_gpios = {
+	.dev_id		= "0000:02:02.4",
+	.table		= {
+		GPIO_LOOKUP("sch_gpio.33158", 12, NULL, GPIO_ACTIVE_HIGH),
+		{}
+	},
+};
+
+static const struct dmi_system_id pch_udc_gpio_dmi_table[] = {
+	{
+		.ident = "MinnowBoard",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_NAME, "MinnowBoard"),
+		},
+		.driver_data = &minnowboard_udc_gpios,
+	},
+	{ }
+};
+
+static void pch_vbus_gpio_remove_table(void *table)
+{
+	gpiod_remove_lookup_table(table);
+}
+
+static int pch_vbus_gpio_add_table(struct pch_udc_dev *dev)
+{
+	struct device *d = &dev->pdev->dev;
+	const struct dmi_system_id *dmi;
+
+	dmi = dmi_first_match(pch_udc_gpio_dmi_table);
+	if (!dmi)
+		return 0;
+
+	gpiod_add_lookup_table(dmi->driver_data);
+	return devm_add_action_or_reset(d, pch_vbus_gpio_remove_table, dmi->driver_data);
+}
+
 /**
  * pch_vbus_gpio_init() - This API initializes GPIO port detecting VBUS.
  * @dev:		Reference to the driver structure

@@ -1378,8 +1417,12 @@ static int pch_vbus_gpio_init(struct pch_udc_dev *dev)
 	dev->vbus_gpio.port = NULL;
 	dev->vbus_gpio.intr = 0;
 
+	err = pch_vbus_gpio_add_table(dev);
+	if (err)
+		return err;
+
 	/* Retrieve the GPIO line from the USB gadget device */
-	gpiod = devm_gpiod_get(d, NULL, GPIOD_IN);
+	gpiod = devm_gpiod_get_optional(d, NULL, GPIOD_IN);
 	if (IS_ERR(gpiod))
 		return PTR_ERR(gpiod);
 	gpiod_set_consumer_name(gpiod, "pch_vbus");

@@ -2889,14 +2932,20 @@ static void pch_udc_pcd_reinit(struct pch_udc_dev *dev)
  * @dev:	Reference to the driver structure
  *
  * Return codes:
- *	0: Success
+ *	0:		Success
+ *	-%ERRNO:	All kind of errors when retrieving VBUS GPIO
  */
 static int pch_udc_pcd_init(struct pch_udc_dev *dev)
 {
+	int ret;
+
 	pch_udc_init(dev);
 	pch_udc_pcd_reinit(dev);
-	pch_vbus_gpio_init(dev);
-	return 0;
+
+	ret = pch_vbus_gpio_init(dev);
+	if (ret)
+		pch_udc_exit(dev);
+	return ret;
 }
 
 /**

@@ -3098,16 +3147,10 @@ static int pch_udc_probe(struct pci_dev *pdev,
 
 	dev->base_addr = pcim_iomap_table(pdev)[bar];
 
-	/*
-	 * FIXME: add a GPIO descriptor table to pdev.dev using
-	 * gpiod_add_descriptor_table() from <linux/gpio/machine.h> based on
-	 * the PCI subsystem ID. The system-dependent GPIO is necessary for
-	 * VBUS operation.
-	 */
-
 	/* initialize the hardware */
-	if (pch_udc_pcd_init(dev))
-		return -ENODEV;
+	retval = pch_udc_pcd_init(dev);
+	if (retval)
+		return retval;
 
 	pci_enable_msi(pdev);