man2: udpate mm/userfaultfd manpages to latest

index e7dc9f813..5c41e4816 100644
@@ -77,6 +77,13 @@ When the last file descriptor referring to a userfaultfd object is closed,
 all memory ranges that were registered with the object are unregistered
 and unread events are flushed.
 .\"
+.PP
+Since Linux 4.14, userfaultfd page fault message can selectively embed faulting
+thread ID information into the fault message.
+One needs to enable this feature explicitly using the
+.BR UFFD_FEATURE_THREAD_ID
+feature bit when initializing the userfaultfd context.
+By default, thread ID reporting is disabled.
 .SS Usage
 The userfaultfd mechanism is designed to allow a thread in a multithreaded
 program to perform user-space paging for the other threads in the process.

@@ -229,6 +236,9 @@ struct uffd_msg {
         struct {
             __u64 flags;    /* Flags describing fault */
             __u64 address;  /* Faulting address */
+            union {
+                __u32 ptid; /* Thread ID of the fault */
+            } feat;
         } pagefault;
 
         struct {            /* Since Linux 4.11 */

@@ -358,6 +368,9 @@ otherwise it is a read fault.
 .\" UFFD_PAGEFAULT_FLAG_WP is not yet supported.
 .RE
 .TP
+.I pagefault.feat.pid
+The thread ID that triggered the page fault.
+.TP
 .I fork.ufd
 The file descriptor associated with the userfault object
 created for the child created by

index 5c41e4816..474294c3d 100644
@@ -78,6 +78,32 @@ all memory ranges that were registered with the object are unregistered
 and unread events are flushed.
 .\"
 .PP
+Userfaultfd supports two modes of registration:
+.TP
+.BR UFFDIO_REGISTER_MODE_MISSING " (since 4.10)"
+When registered with
+.B UFFDIO_REGISTER_MODE_MISSING
+mode, the userspace will receive a page fault message
+when a missing page is accessed.
+The faulted thread will be stopped from execution until the page fault is
+resolved from the userspace by either an
+.B UFFDIO_COPY
+or an
+.B UFFDIO_ZEROPAGE
+ioctl.
+.TP
+.BR UFFDIO_REGISTER_MODE_WP " (since 5.7)"
+When registered with
+.B UFFDIO_REGISTER_MODE_WP
+mode, the userspace will receive a page fault message
+when a write-protected page is written.
+The faulted thread will be stopped from execution
+until the userspace write-unprotect the page using an
+.B UFFDIO_WRITEPROTECT
+ioctl.
+.PP
+Multiple modes can be enabled at the same time for the same memory range.
+.PP
 Since Linux 4.14, userfaultfd page fault message can selectively embed faulting
 thread ID information into the fault message.
 One needs to enable this feature explicitly using the

@@ -107,7 +133,7 @@ the process that monitors userfaultfd and handles page faults
 needs to be aware of the changes in the virtual memory layout
 of the faulting process to avoid memory corruption.
 .PP
-Starting from Linux 4.11,
+Since Linux 4.11,
 userfaultfd can also notify the fault-handling threads about changes
 in the virtual memory layout of the faulting process.
 In addition, if the faulting process invokes

@@ -144,6 +170,17 @@ single threaded non-cooperative userfaultfd manager implementations.
 .\" and limitations remaining in 4.11
 .\" Maybe it's worth adding a dedicated sub-section...
 .\"
+.PP
+Since Linux 5.7, userfaultfd is able to do
+synchronous page dirty tracking using the new write-protect register mode.
+One should check against the feature bit
+.B UFFD_FEATURE_PAGEFAULT_FLAG_WP
+before using this feature.
+Similar to the original userfaultfd missing mode, the write-protect mode will
+generate an userfaultfd message when the protected page is written.
+The user needs to resolve the page fault by unprotecting the faulted page and
+kick the faulted thread to continue.
+For more information, please refer to "Userfaultfd write-protect mode" section.
 .SS Userfaultfd operation
 After the userfaultfd object is created with
 .BR userfaultfd (),

@@ -179,7 +216,7 @@ or
 .BR ioctl (2)
 operations to resolve the page fault.
 .PP
-Starting from Linux 4.14, if the application sets the
+Since Linux 4.14, if the application sets the
 .B UFFD_FEATURE_SIGBUS
 feature bit using the
 .B UFFDIO_API

@@ -219,6 +256,65 @@ userfaultfd can be used only with anonymous private memory mappings.
 Since Linux 4.11,
 userfaultfd can be also used with hugetlbfs and shared memory mappings.
 .\"
+.SS Userfaultfd write-protect mode (since 5.7)
+Since Linux 5.7, userfaultfd supports write-protect mode.
+The user needs to first check availability of this feature using
+.B UFFDIO_API
+ioctl against the feature bit
+.B UFFD_FEATURE_PAGEFAULT_FLAG_WP
+before using this feature.
+.PP
+To register with userfaultfd write-protect mode, the user needs to initiate the
+.B UFFDIO_REGISTER
+ioctl with mode
+.B UFFDIO_REGISTER_MODE_WP
+set.
+Note that it's legal to monitor the same memory range with multiple modes.
+For example, the user can do
+.B UFFDIO_REGISTER
+with the mode set to
+.BR "UFFDIO_REGISTER_MODE_MISSING | UFFDIO_REGISTER_MODE_WP" .
+When there is only
+.B UFFDIO_REGISTER_MODE_WP
+registered, the userspace will
+.I not
+receive any message when a missing page is written.
+Instead, the userspace will only receive a write-protect page fault message
+when an existing but write-protected page got written.
+.PP
+After the
+.B UFFDIO_REGISTER
+ioctl completed with
+.B UFFDIO_REGISTER_MODE_WP
+mode set,
+the user can write-protect any existing memory within the range using the ioctl
+.B UFFDIO_WRITEPROTECT
+where
+.I uffdio_writeprotect.mode
+should be set to
+.BR UFFDIO_WRITEPROTECT_MODE_WP .
+.PP
+When a write-protect event happens,
+the userspace will receive a page fault message whose
+.I uffd_msg.pagefault.flags
+will be with
+.B UFFD_PAGEFAULT_FLAG_WP
+flag set.
+Note: since only writes can trigger such kind of fault,
+write-protect messages will always be with
+.B UFFD_PAGEFAULT_FLAG_WRITE
+bit set too along with bit
+.BR UFFD_PAGEFAULT_FLAG_WP .
+.PP
+To resolve a write-protection page fault, the user should initiate another
+.B UFFDIO_WRITEPROTECT
+ioctl, whose
+.I uffd_msg.pagefault.flags
+should have the flag
+.B UFFDIO_WRITEPROTECT_MODE_WP
+cleared upon the faulted page or range.
+.PP
+Write-protect mode only supports private anonymous memory.
 .SS Reading from the userfaultfd structure
 Each
 .BR read (2)

@@ -364,8 +460,12 @@ flag (see
 .BR ioctl_userfaultfd (2))
 and this flag is set, this a write fault;
 otherwise it is a read fault.
-.\"
-.\" UFFD_PAGEFAULT_FLAG_WP is not yet supported.
+.TP
+.B UFFD_PAGEFAULT_FLAG_WP
+If the address is in a range that was registered with the
+.B UFFDIO_REGISTER_MODE_WP
+flag, when this bit is set it means it's a write-protect fault.
+Otherwise it's a page missing fault.
 .RE
 .TP
 .I pagefault.feat.pid

index 47ae5f473..d4a8375b8 100644
@@ -208,6 +208,11 @@ signal will be sent to the faulting process.
 Applications using this
 feature will not require the use of a userfaultfd monitor for processing
 memory accesses to the regions registered with userfaultfd.
+.TP
+.BR UFFD_FEATURE_THREAD_ID " (since Linux 4.14)"
+If this feature bit is set,
+.I uffd_msg.pagefault.feat.ptid
+will be set to the faulted thread ID for each page fault message.
 .PP
 The returned
 .I ioctls

index d4a8375b8..ca533a383 100644
@@ -234,6 +234,11 @@ operation is supported.
 The
 .B UFFDIO_UNREGISTER
 operation is supported.
+.TP
+.B 1 << _UFFDIO_WRITEPROTECT
+The
+.B UFFDIO_WRITEPROTECT
+operation is supported.
 .PP
 This
 .BR ioctl (2)

@@ -322,9 +327,6 @@ Track page faults on missing pages.
 .B UFFDIO_REGISTER_MODE_WP
 Track page faults on write-protected pages.
 .PP
-Currently, the only supported mode is
-.BR UFFDIO_REGISTER_MODE_MISSING .
-.PP
 If the operation is successful, the kernel modifies the
 .I ioctls
 bit-mask field to indicate which

@@ -443,6 +445,16 @@ operation:
 .TP
 .B UFFDIO_COPY_MODE_DONTWAKE
 Do not wake up the thread that waits for page-fault resolution
+.TP
+.B UFFDIO_COPY_MODE_WP
+Copy the page with read-only permission.
+This allows the user to trap the next write to the page,
+which will block and generate another write-protect userfault message.
+This is only used when both
+.B UFFDIO_REGISTER_MODE_MISSING
+and
+.B UFFDIO_REGISTER_MODE_WP
+modes are enabled for the registered range.
 .PP
 The
 .I copy

@@ -654,6 +666,72 @@ field of the
 structure was not a multiple of the system page size; or
 .I len
 was zero; or the specified range was otherwise invalid.
+.SS UFFDIO_WRITEPROTECT (Since Linux 5.7)
+Write-protect or write-unprotect an userfaultfd registered memory range
+registered with mode
+.BR UFFDIO_REGISTER_MODE_WP .
+.PP
+The
+.I argp
+argument is a pointer to a
+.I uffdio_range
+structure as shown below:
+.PP
+.in +4n
+.EX
+struct uffdio_writeprotect {
+    struct uffdio_range range;  /* Range to change write permission */
+    __u64 mode;                 /* Mode to change write permission */
+};
+.EE
+.in
+There're two mode bits that are supported in this structure:
+.TP
+.B UFFDIO_WRITEPROTECT_MODE_WP
+When this mode bit is set, the ioctl will be a write-protect operation upon the
+memory range specified by
+.IR range .
+Otherwise it'll be a write-unprotect operation upon the specified range,
+which can be used to resolve an userfaultfd write-protect page fault.
+.TP
+.B UFFDIO_WRITEPROTECT_MODE_DONTWAKE
+When this mode bit is set,
+do not wake up any thread that waits for page-fault resolution after the operation.
+This could only be specified if
+.B UFFDIO_WRITEPROTECT_MODE_WP
+is not specified.
+.PP
+This
+.BR ioctl (2)
+operation returns 0 on success.
+On error, \-1 is returned and
+.I errno
+is set to indicate the error.
+Possible errors include:
+.TP
+.B EINVAL
+The
+.I start
+or the
+.I len
+field of the
+.I ufdio_range
+structure was not a multiple of the system page size; or
+.I len
+was zero; or the specified range was otherwise invalid.
+.TP
+.B EAGAIN
+The process was interrupted; retry this call.
+.TP
+.B ENOENT
+The range specified in
+.I range
+is not valid.
+For example, the virtual address does not exist,
+or not registered with userfaultfd write-protect mode.
+.TP
+.B EFAULT
+Encountered a generic fault during processing.
 .SH RETURN VALUE
 See descriptions of the individual operations, above.
 .SH ERRORS