drm/panel: simple: Add support for EDT ETMV570G2DHU panel
Subsystems (4)
PATCH 1/2 drm/panel: simple: Add support for EDT ETMV570G2DHU panel
From: Stefan Riedmueller <[email protected]>
This patch adds support for the EDT ETMV570G2DHU 5.7" (640x480) lcd panel to DRM simple panel driver.
--- .../bindings/display/panel/panel-simple.yaml | 3 ++ drivers/gpu/drm/panel/panel-simple.c | 29 +++++++++++++++++++ 2 files changed, 32 insertions(+)
Documentation/devicetree/bindings/display/panel/panel-simple.yaml +3 -0
@@ -114,6 +114,9 @@ properties: - edt,etm043080dh6gp # Emerging Display Technology Corp. 480x272 TFT Display - edt,etm0430g0dh6 + # Emerging Display Technology Corp. 5.7" VGA TFT LCD panel with + # capacitive touch + - edt,etmv570g2dhu # Emerging Display Technology Corp. WVGA TFT Display with capacitive touch # Same as ETM0700G0DH6 but with inverted pixel clock. - edt,etm070080bdh6
drivers/gpu/drm/panel/panel-simple.c +29 -0
@@ -1926,6 +1926,32 @@ static const struct panel_desc edt_et057090dhu = { .connector_type = DRM_MODE_CONNECTOR_DPI, }; +static const struct drm_display_mode edt_etmv570g2dhu_mode = { + .clock =25175 , + .hdisplay =640 , + .hsync_start =640 , + .hsync_end =640 +16 , + .htotal =640 +16 +30 +114 , + .vdisplay =480 , + .vsync_start =480 +10 , + .vsync_end =480 +10 +3 , + .vtotal =480 +10 +3 +35 , + .flags =DRM_MODE_FLAG_PVSYNC |DRM_MODE_FLAG_PHSYNC , +}; + +static const struct panel_desc edt_etmv570g2dhu = { + .modes = &edt_etmv570g2dhu_mode, + .num_modes =1 , + .bpc =6 , + .size = { + .width =115 , + .height =86 , + }, + .bus_format =MEDIA_BUS_FMT_RGB888_1X24 , + .bus_flags =DRM_BUS_FLAG_DE_HIGH |DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE , + .connector_type =DRM_MODE_CONNECTOR_DPI , +}; +static const struct drm_display_mode edt_etm0700g0dh6_mode = { .clock =33260 , .hdisplay =800 ,
@@ -4226,6 +4252,9 @@ static const struct of_device_id platform_of_match[] = { }, { .compatible = "edt,et057090dhu", .data = &edt_et057090dhu, + }, { + .compatible = "edt,etmv570g2dhu", + .data = &edt_etmv570g2dhu, }, { .compatible = "edt,et070080dh6", .data = &edt_etm0700g0dh6,
Signature · 1 line
2.30.0
PATCH 2/2 drm/panel: simple: Add support for EDT ETM0350G0DH6 panel
From: Stefan Riedmueller <[email protected]>
This patch adds support for the EDT ETM0350G0DH6 3.5" (320x240) lcd panel to DRM simple panel driver.
--- .../bindings/display/panel/panel-simple.yaml | 3 ++ drivers/gpu/drm/panel/panel-simple.c | 29 +++++++++++++++++++ 2 files changed, 32 insertions(+)
Documentation/devicetree/bindings/display/panel/panel-simple.yaml +3 -0
@@ -107,6 +107,9 @@ properties: - dlc,dlc1010gig # Emerging Display Technology Corp. 3.5" QVGA TFT LCD panel - edt,et035012dm6 + # Emerging Display Technology Corp. 3.5" WVGA TFT LCD panel with + # capacitive multitouch + - edt,etm0350g0dh6 # Emerging Display Technology Corp. 5.7" VGA TFT LCD panel - edt,et057090dhu - edt,et070080dh6
drivers/gpu/drm/panel/panel-simple.c +29 -0
@@ -1847,6 +1847,32 @@ static const struct panel_desc edt_et035012dm6 = { .bus_flags = DRM_BUS_FLAG_DE_LOW | DRM_BUS_FLAG_PIXDATA_SAMPLE_POSEDGE, }; +static const struct drm_display_mode edt_etm0350g0dh6_mode = { + .clock =6520 , + .hdisplay =320 , + .hsync_start =320 +20 , + .hsync_end =320 +20 +68 , + .htotal =320 +20 +68 , + .vdisplay =240 , + .vsync_start =240 +4 , + .vsync_end =240 +4 +18 , + .vtotal =240 +4 +18 , + .flags =DRM_MODE_FLAG_NVSYNC |DRM_MODE_FLAG_NHSYNC , +}; + +static const struct panel_desc edt_etm0350g0dh6 = { + .modes = &edt_etm0350g0dh6_mode, + .num_modes =1 , + .bpc =6 , + .size = { + .width =70 , + .height =53 , + }, + .bus_format =MEDIA_BUS_FMT_RGB888_1X24 , + .bus_flags =DRM_BUS_FLAG_DE_HIGH |DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE , + .connector_type =DRM_MODE_CONNECTOR_DPI , +}; +static const struct drm_display_mode edt_etm043080dh6gp_mode = { .clock =10870 , .hdisplay =480 ,
@@ -4243,6 +4269,9 @@ static const struct of_device_id platform_of_match[] = { }, { .compatible = "edt,et035012dm6", .data = &edt_et035012dm6, + }, { + .compatible = "edt,etm0350g0dh6", + .data = &edt_etm0350g0dh6, }, { .compatible = "edt,etm043080dh6gp", .data = &edt_etm043080dh6gp,
Signature · 1 line
2.30.0
Rob Herring
maintainerRe: [PATCH 2/2] drm/panel: simple: Add support for EDT ETM0350G0DH6 panel
Quoted 17 lines · Yunus Bas
From: Stefan Riedmueller <[email protected]>
This patch adds support for the EDT ETM0350G0DH6 3.5" (320x240) lcd panel to DRM simple panel driver.
Signed-off-by Stefan Riedmueller <[email protected]>Signed-off-by Yunus Bas <[email protected]>--- .../bindings/display/panel/panel-simple.yaml | 3 ++ drivers/gpu/drm/panel/panel-simple.c | 29 +++++++++++++++++++ 2 files changed, 32 insertions(+)Documentation/devicetree/bindings/display/panel/panel-simple.yaml +0
-0
Documentation/devicetree/bindings/display/panel/panel-simple.yaml properties: · line 112
Quoted 6 lines
Documentation/devicetree/bindings/display/panel/panel-simple.yaml +3
-0@@ -107,6 +107,9 @@ properties: - dlc,dlc1010gig # Emerging Display Technology Corp. 3.5" QVGA TFT LCD panel - edt,et035012dm6 + # Emerging Display Technology Corp. 3.5" WVGA TFT LCD panel with + # capacitive multitouch + - edt,etm0350g0dh6
Alpha-numeric order.
Documentation/devicetree/bindings/display/panel/panel-simple.yaml properties: · line 115
Quoted 3 lines
Documentation/devicetree/bindings/display/panel/panel-simple.yaml +0
-0# Emerging Display Technology Corp. 5.7" VGA TFT LCD panel - edt,et057090dhu - edt,et070080dh6
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
Rob Herring
maintainerQuoted 9 lines · Yunus Bas
From: Stefan Riedmueller <[email protected]>
This patch adds support for the EDT ETMV570G2DHU 5.7" (640x480) lcd panel to DRM simple panel driver.
Signed-off-by Stefan Riedmueller <[email protected]>Signed-off-by Yunus Bas <[email protected]>--- .../bindings/display/panel/panel-simple.yaml | 3 ++
Bindings should be their own patch.
Quoted 67 lines
drivers/gpu/drm/panel/panel-simple.c | 29 +++++++++++++++++++ 2 files changed, 32 insertions(+)Documentation/devicetree/bindings/display/panel/panel-simple.yaml +3
-0@@ -114,6 +114,9 @@ properties: - edt,etm043080dh6gp # Emerging Display Technology Corp. 480x272 TFT Display - edt,etm0430g0dh6 + # Emerging Display Technology Corp. 5.7" VGA TFT LCD panel with + # capacitive touch + - edt,etmv570g2dhu # Emerging Display Technology Corp. WVGA TFT Display with capacitive touch # Same as ETM0700G0DH6 but with inverted pixel clock. - edt,etm070080bdh6drivers/gpu/drm/panel/panel-simple.c +29
-0@@ -1926,6 +1926,32 @@ static const struct panel_desc edt_et057090dhu = { .connector_type = DRM_MODE_CONNECTOR_DPI, }; +static const struct drm_display_mode edt_etmv570g2dhu_mode = { + .clock =25175 , + .hdisplay =640 , + .hsync_start =640 , + .hsync_end =640 +16 , + .htotal =640 +16 +30 +114 , + .vdisplay =480 , + .vsync_start =480 +10 , + .vsync_end =480 +10 +3 , + .vtotal =480 +10 +3 +35 , + .flags =DRM_MODE_FLAG_PVSYNC |DRM_MODE_FLAG_PHSYNC , +}; + +static const struct panel_desc edt_etmv570g2dhu = { + .modes = &edt_etmv570g2dhu_mode, + .num_modes =1 , + .bpc =6 , + .size = { + .width =115 , + .height =86 , + }, + .bus_format =MEDIA_BUS_FMT_RGB888_1X24 , + .bus_flags =DRM_BUS_FLAG_DE_HIGH |DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE , + .connector_type =DRM_MODE_CONNECTOR_DPI , +}; +static const struct drm_display_mode edt_etm0700g0dh6_mode = { .clock =33260 , .hdisplay =800 ,@@ -4226,6 +4252,9 @@ static const struct of_device_id platform_of_match[] = { }, { .compatible = "edt,et057090dhu", .data = &edt_et057090dhu, + }, { + .compatible = "edt,etmv570g2dhu", + .data = &edt_etmv570g2dhu, }, { .compatible = "edt,et070080dh6", .data = &edt_etm0700g0dh6,Signature · 1 line
2.30.0
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
Am Dienstag, dem 30.03.2021 um 17:47 -0500 schrieb Rob Herring:
On Tue, Mar 30, 2021 at 09:09:06AM +0200, Yunus Bas wrote:
From: Stefan Riedmueller <[email protected]<mailto:[email protected]>>
This patch adds support for the EDT ETMV570G2DHU 5.7" (640x480) lcd panel to DRM simple panel driver.
--- .../bindings/display/panel/panel-simple.yaml | 3 ++
Bindings should be their own patch.
Ok, I'll split up the patches.
drivers/gpu/drm/panel/panel-simple.c | 29 +++++++++++++++++++ 2 files changed, 32 insertions(+)
Documentation/devicetree/bindings/display/panel/panel-simple.yaml +3 -0
@@ -114,6 +114,9 @@ properties: - edt,etm043080dh6gp # Emerging Display Technology Corp. 480x272 TFT Display - edt,etm0430g0dh6 + # Emerging Display Technology Corp. 5.7" VGA TFT LCD panel with + # capacitive touch + - edt,etmv570g2dhu # Emerging Display Technology Corp. WVGA TFT Display with capacitive touch # Same as ETM0700G0DH6 but with inverted pixel clock. - edt,etm070080bdh6
drivers/gpu/drm/panel/panel-simple.c +29 -0
@@ -1926,6 +1926,32 @@ static const struct panel_desc edt_et057090dhu = { .connector_type = DRM_MODE_CONNECTOR_DPI, }; +static const struct drm_display_mode edt_etmv570g2dhu_mode = { + .clock =25175 , + .hdisplay =640 , + .hsync_start =640 , + .hsync_end =640 +16 , + .htotal =640 +16 +30 +114 , + .vdisplay =480 , + .vsync_start =480 +10 , + .vsync_end =480 +10 +3 , + .vtotal =480 +10 +3 +35 , + .flags =DRM_MODE_FLAG_PVSYNC |DRM_MODE_FLAG_PHSYNC , +}; + +static const struct panel_desc edt_etmv570g2dhu = { + .modes = &edt_etmv570g2dhu_mode, + .num_modes =1 , + .bpc =6 , + .size = { + .width =115 , + .height =86 , + }, + .bus_format =MEDIA_BUS_FMT_RGB888_1X24 , + .bus_flags =DRM_BUS_FLAG_DE_HIGH |DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE , + .connector_type =DRM_MODE_CONNECTOR_DPI , +}; +static const struct drm_display_mode edt_etm0700g0dh6_mode = { .clock =33260 , .hdisplay =800 ,
@@ -4226,6 +4252,9 @@ static const struct of_device_id platform_of_match[] = { }, { .compatible = "edt,et057090dhu", .data = &edt_et057090dhu, + }, { + .compatible = "edt,etmv570g2dhu", + .data = &edt_etmv570g2dhu, }, { .compatible = "edt,et070080dh6", .data = &edt_etm0700g0dh6,
--
2.30.0
--
Mit freundlichen Grüßen
Yunus Bas
-Software Engineer-
PHYTEC Messtechnik GmbH
Robert-Koch-Str. 39
55129 Mainz
Germany
Tel.: +49 (0)6131 9221- 466
Web: www.phytec.de<http://www.phytec.de/>
Sie finden uns auch auf: Facebook<https://www.facebook.com/PHYTEC.Mainz>, LinkedIn,<http://www.linkedin.com/company/phytec-messtechnik-gmbh> Xing<https://www.xing.com/companies/phytecmesstechnikgmbh>, YouTube<http://www.youtube.com/user/PhytecMainz>
PHYTEC Messtechnik GmbH | Robert-Koch-Str. 39 | 55129 Mainz, Germany
Geschäftsführer: Dipl.-Ing. Michael Mitezki, Dipl.-Ing. Bodo Huber | Handelsregister Mainz HRB 4656 | Finanzamt Mainz | St.Nr. 266500608, DE 149059855
This E-Mail may contain confidential or privileged information. If you are not the intended recipient (or have received this E-Mail in error) please notify the sender immediately and destroy this E-Mail. Any unauthorized copying, disclosure or distribution of the material in this E-Mail is strictly forbidden.
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel