scsi: mpt3sas: Fix out-of-bounds warnings in _ctl_addnl_diag_query

Fix the following out-of-bounds warnings by embedding existing struct htb_rel_query into struct mpt3_addnl_diag_query, instead of duplicating its members:

include/linux/fortify-string.h:20:29: warning: '__builtin_memcpy' offset [19, 32] from the object at 'karg' is out of the bounds of referenced subobject 'buffer_rel_condition' with type 'short unsigned int' at offset 16 [-Warray-bounds] include/linux/fortify-string.h:22:29: warning: '__builtin_memset' offset [19, 32] from the object at 'karg' is out of the bounds of referenced subobject 'buffer_rel_condition' with type 'short unsigned int' at offset 16 [-Warray-bounds]

The problem is that the original code is trying to copy data into a bunch of struct members adjacent to each other in a single call to memcpy(). All those members are exactly the same contained in struct htb_rel_query, so instead of duplicating them into struct mpt3_addnl_diag_query, replace them with new member rel_query of type struct htb_rel_query. So, now that this new object is introduced, memcpy() doesn't overrun the length of &karg.buffer_rel_condition, because the address of the new struct object _rel_query_ is used as destination, instead. The same issue is present when calling memset(), and it is fixed with this same approach.

Below is a comparison of struct mpt3_addnl_diag_query, before and after this change (the size and cachelines remain the same):

$ pahole -C mpt3_addnl_diag_query drivers/scsi/mpt3sas/mpt3sas_ctl.o
struct mpt3_addnl_diag_query {
	struct mpt3_ioctl_header   hdr;                  /*     0    12 */
	uint32_t                   unique_id;            /*    12     4 */
	uint16_t                   buffer_rel_condition; /*    16     2 */
	uint16_t                   reserved1;            /*    18     2 */
	uint32_t                   trigger_type;         /*    20     4 */
	uint32_t                   trigger_info_dwords[2]; /*    24     8 */
	uint32_t                   reserved2[2];         /*    32     8 */

	/* size: 40, cachelines: 1, members: 7 */
	/* last cacheline: 40 bytes */
};

$ pahole -C mpt3_addnl_diag_query drivers/scsi/mpt3sas/mpt3sas_ctl.o
struct mpt3_addnl_diag_query {
	struct mpt3_ioctl_header   hdr;                  /*     0    12 */
	uint32_t                   unique_id;            /*    12     4 */
	struct htb_rel_query       rel_query;            /*    16    16 */
	uint32_t                   reserved2[2];         /*    32     8 */

	/* size: 40, cachelines: 1, members: 4 */
	/* last cacheline: 40 bytes */
};

Also, this helps with the ongoing efforts to globally enable -Warray-bounds and get us closer to being able to tighten the FORTIFY_SOURCE routines on memcpy().

---
 drivers/scsi/mpt3sas/mpt3sas_ctl.c |  5 ++---
 drivers/scsi/mpt3sas/mpt3sas_ctl.h | 12 ++++--------
 2 files changed, 6 insertions(+), 11 deletions(-)

index e7582fb8a93f..b66140e4c370 100644
@@ -2507,7 +2507,7 @@ _ctl_addnl_diag_query(struct MPT3SAS_ADAPTER *ioc, void __user *arg)
 		    __func__, karg.unique_id);
 		return -EPERM;
 	}
-	memset(&karg.buffer_rel_condition, 0, sizeof(struct htb_rel_query));
+	memset(&karg.rel_query, 0, sizeof(karg.rel_query));
 	if ((ioc->diag_buffer_status[buffer_type] &
 	    MPT3_DIAG_BUFFER_IS_REGISTERED) == 0) {
 		ioc_info(ioc, "%s: buffer_type(0x%02x) is not registered\n",

@@ -2520,8 +2520,7 @@ _ctl_addnl_diag_query(struct MPT3SAS_ADAPTER *ioc, void __user *arg)
 		    __func__, buffer_type);
 		return -EPERM;
 	}
-	memcpy(&karg.buffer_rel_condition, &ioc->htb_rel,
-	    sizeof(struct  htb_rel_query));
+	memcpy(&karg.rel_query, &ioc->htb_rel, sizeof(karg.rel_query));
 out:
 	if (copy_to_user(arg, &karg, sizeof(struct mpt3_addnl_diag_query))) {
 		ioc_err(ioc, "%s: unable to write mpt3_addnl_diag_query data @ %p\n",

index d2ccdafb8df2..8f6ffb40261c 100644
@@ -50,6 +50,8 @@
 #include <linux/miscdevice.h>
 #endif
 
+#include "mpt3sas_base.h"
+
 #ifndef MPT2SAS_MINOR
 #define MPT2SAS_MINOR		(MPT_MINOR + 1)
 #endif

@@ -436,19 +438,13 @@ struct mpt3_diag_read_buffer {
  * struct mpt3_addnl_diag_query - diagnostic buffer release reason
  * @hdr - generic header
  * @unique_id - unique id associated with this buffer.
- * @buffer_rel_condition - Release condition ioctl/sysfs/reset
- * @reserved1
- * @trigger_type - Master/Event/scsi/MPI
- * @trigger_info_dwords - Data Correspondig to trigger type
+ * @rel_query - release query.
  * @reserved2
  */
 struct mpt3_addnl_diag_query {
 	struct mpt3_ioctl_header hdr;
 	uint32_t unique_id;
-	uint16_t buffer_rel_condition;
-	uint16_t reserved1;
-	uint32_t trigger_type;
-	uint32_t trigger_info_dwords[2];
+	struct htb_rel_query rel_query;
 	uint32_t reserved2[2];
 };
 

2.27.0

Gustavo,

Applied to 5.13/scsi-staging, thanks!

Martin K. Petersen	Oracle Linux Engineering

Applied to 5.13/scsi-queue, thanks!

[1/1] scsi: mpt3sas: Fix out-of-bounds warnings in _ctl_addnl_diag_query

      https://git.kernel.org/mkp/scsi/c/16660db3fc2a

Martin K. Petersen	Oracle Linux Engineering