Skip to contentSkip to conversation

powerpc/powernv: Enable HAIL (HV AIL) for ISA v3.1 processors

PATCH Applied Nicholas Piggin 4 participants 6 messages Apr 2, 2021 – Apr 19, 2021 PowerPC

lore
Share & tools
lore

Nicholas Piggin

author reviewer
#0 lore raw

PATCH 1/1 powerpc/powernv: Enable HAIL (HV AIL) for ISA v3.1 processors

Starting with ISA v3.1, LPCR[AIL] no longer controls the interrupt mode for HV=1 interrupts. Instead, a new LPCR[HAIL] bit is defined which behaves like AIL=3 for HV interrupts when set.

Set HAIL on bare metal to give us mmu-on interrupts and improve performance.

This also fixes an scv bug: we don't implement scv real mode (AIL=0) vectors because they are at an inconvenient location, so we just disable scv support when AIL can not be set. However powernv assumes that LPCR[AIL] will enable AIL mode so it enables scv support despite HV interrupts being AIL=0, which causes scv interrupts to go off into the weeds.

---
 arch/powerpc/include/asm/reg.h |  1 +
 arch/powerpc/kernel/setup_64.c | 19 ++++++++++++++++---
 2 files changed, 17 insertions(+), 3 deletions(-)
arch/powerpc/include/asm/reg.h +1 -0
index 1be20bc8dce2..9086a2644c89 100644
@@ -441,6 +441,7 @@
 #define   LPCR_VRMA_LP1		ASM_CONST(0x0000800000000000)
 #define   LPCR_RMLS		0x1C000000	/* Implementation dependent RMO limit sel */
 #define   LPCR_RMLS_SH		26
+#define   LPCR_HAIL		ASM_CONST(0x0000000004000000)   /* HV AIL (ISAv3.1) */
 #define   LPCR_ILE		ASM_CONST(0x0000000002000000)   /* !HV irqs set MSR:LE */
 #define   LPCR_AIL		ASM_CONST(0x0000000001800000)	/* Alternate interrupt location */
 #define   LPCR_AIL_0		ASM_CONST(0x0000000000000000)	/* MMU off exception offset 0x0 */
arch/powerpc/kernel/setup_64.c +16 -3
index 04a31586f760..671192afcdfd 100644
@@ -233,10 +233,23 @@ static void cpu_ready_for_interrupts(void)
 	 * If we are not in hypervisor mode the job is done once for
 	 * the whole partition in configure_exceptions().
 	 */
-	if (cpu_has_feature(CPU_FTR_HVMODE) &&
-	    cpu_has_feature(CPU_FTR_ARCH_207S)) {
+	if (cpu_has_feature(CPU_FTR_HVMODE)) {
 		unsigned long lpcr = mfspr(SPRN_LPCR);
-		mtspr(SPRN_LPCR, lpcr | LPCR_AIL_3);
+		unsigned long new_lpcr = lpcr;
+
+		if (cpu_has_feature(CPU_FTR_ARCH_31)) {
+			/* P10 DD1 does not have HAIL */
+			if (pvr_version_is(PVR_POWER10) &&
+					(mfspr(SPRN_PVR) & 0xf00) == 0x100)
+				new_lpcr |= LPCR_AIL_3;
+			else
+				new_lpcr |= LPCR_HAIL;
+		} else if (cpu_has_feature(CPU_FTR_ARCH_207S)) {
+			new_lpcr |= LPCR_AIL_3;
+		}
+
+		if (new_lpcr != lpcr)
+			mtspr(SPRN_LPCR, new_lpcr);
 	}
 
 	/*
Signature · 1 line
2.23.0
#1 lore raw
Quoted 3 lines · Nicholas Piggin

Starting with ISA v3.1, LPCR[AIL] no longer controls the interrupt mode for HV=1 interrupts. Instead, a new LPCR[HAIL] bit is defined which behaves like AIL=3 for HV interrupts when set.

Will QEMU need an update ?

Thanks,

C.

Quoted 60 lines

Set HAIL on bare metal to give us mmu-on interrupts and improve performance.

This also fixes an scv bug: we don't implement scv real mode (AIL=0) vectors because they are at an inconvenient location, so we just disable scv support when AIL can not be set. However powernv assumes that LPCR[AIL] will enable AIL mode so it enables scv support despite HV interrupts being AIL=0, which causes scv interrupts to go off into the weeds.

---
 arch/powerpc/include/asm/reg.h |  1 +
 arch/powerpc/kernel/setup_64.c | 19 ++++++++++++++++---
 2 files changed, 17 insertions(+), 3 deletions(-)
arch/powerpc/include/asm/reg.h +1 -0
index 1be20bc8dce2..9086a2644c89 100644
@@ -441,6 +441,7 @@
 #define   LPCR_VRMA_LP1		ASM_CONST(0x0000800000000000)
 #define   LPCR_RMLS		0x1C000000	/* Implementation dependent RMO limit sel */
 #define   LPCR_RMLS_SH		26
+#define   LPCR_HAIL		ASM_CONST(0x0000000004000000)   /* HV AIL (ISAv3.1) */
 #define   LPCR_ILE		ASM_CONST(0x0000000002000000)   /* !HV irqs set MSR:LE */
 #define   LPCR_AIL		ASM_CONST(0x0000000001800000)	/* Alternate interrupt location */
 #define   LPCR_AIL_0		ASM_CONST(0x0000000000000000)	/* MMU off exception offset 0x0 */
arch/powerpc/kernel/setup_64.c +16 -3
index 04a31586f760..671192afcdfd 100644
@@ -233,10 +233,23 @@ static void cpu_ready_for_interrupts(void)
 	 * If we are not in hypervisor mode the job is done once for
 	 * the whole partition in configure_exceptions().
 	 */
-	if (cpu_has_feature(CPU_FTR_HVMODE) &&
-	    cpu_has_feature(CPU_FTR_ARCH_207S)) {
+	if (cpu_has_feature(CPU_FTR_HVMODE)) {
 		unsigned long lpcr = mfspr(SPRN_LPCR);
-		mtspr(SPRN_LPCR, lpcr | LPCR_AIL_3);
+		unsigned long new_lpcr = lpcr;
+
+		if (cpu_has_feature(CPU_FTR_ARCH_31)) {
+			/* P10 DD1 does not have HAIL */
+			if (pvr_version_is(PVR_POWER10) &&
+					(mfspr(SPRN_PVR) & 0xf00) == 0x100)
+				new_lpcr |= LPCR_AIL_3;
+			else
+				new_lpcr |= LPCR_HAIL;
+		} else if (cpu_has_feature(CPU_FTR_ARCH_207S)) {
+			new_lpcr |= LPCR_AIL_3;
+		}
+
+		if (new_lpcr != lpcr)
+			mtspr(SPRN_LPCR, new_lpcr);
 	}
 
 	/*
author reviewer
#2 lore raw

Excerpts from Cédric Le Goater's message of April 2, 2021 4:10 pm:

Quoted 6 lines · Nicholas Piggin
Quoted 3 lines

Starting with ISA v3.1, LPCR[AIL] no longer controls the interrupt mode for HV=1 interrupts. Instead, a new LPCR[HAIL] bit is defined which behaves like AIL=3 for HV interrupts when set.

Will QEMU need an update ?

Yes you're right it will, we need to do that.

Thanks,
Nick

#3 lore raw
In reply to Nicholas Piggin
Quoted 7 lines · Nicholas Piggin

Starting with ISA v3.1, LPCR[AIL] no longer controls the interrupt mode for HV=1 interrupts. Instead, a new LPCR[HAIL] bit is defined which behaves like AIL=3 for HV interrupts when set.

Set HAIL on bare metal to give us mmu-on interrupts and improve performance.

Quoted 6 lines

This also fixes an scv bug: we don't implement scv real mode (AIL=0) vectors because they are at an inconvenient location, so we just disable scv support when AIL can not be set. However powernv assumes that LPCR[AIL] will enable AIL mode so it enables scv support despite HV interrupts being AIL=0, which causes scv interrupts to go off into the weeds.

Should we tag this as fixing the initial P10 support, or the scv support? Or neither?

cheers

Quoted 45 lines
arch/powerpc/include/asm/reg.h +1 -0
index 1be20bc8dce2..9086a2644c89 100644
@@ -441,6 +441,7 @@
 #define   LPCR_VRMA_LP1		ASM_CONST(0x0000800000000000)
 #define   LPCR_RMLS		0x1C000000	/* Implementation dependent RMO limit sel */
 #define   LPCR_RMLS_SH		26
+#define   LPCR_HAIL		ASM_CONST(0x0000000004000000)   /* HV AIL (ISAv3.1) */
 #define   LPCR_ILE		ASM_CONST(0x0000000002000000)   /* !HV irqs set MSR:LE */
 #define   LPCR_AIL		ASM_CONST(0x0000000001800000)	/* Alternate interrupt location */
 #define   LPCR_AIL_0		ASM_CONST(0x0000000000000000)	/* MMU off exception offset 0x0 */
arch/powerpc/kernel/setup_64.c +16 -3
index 04a31586f760..671192afcdfd 100644
@@ -233,10 +233,23 @@ static void cpu_ready_for_interrupts(void)
 	 * If we are not in hypervisor mode the job is done once for
 	 * the whole partition in configure_exceptions().
 	 */
-	if (cpu_has_feature(CPU_FTR_HVMODE) &&
-	    cpu_has_feature(CPU_FTR_ARCH_207S)) {
+	if (cpu_has_feature(CPU_FTR_HVMODE)) {
 		unsigned long lpcr = mfspr(SPRN_LPCR);
-		mtspr(SPRN_LPCR, lpcr | LPCR_AIL_3);
+		unsigned long new_lpcr = lpcr;
+
+		if (cpu_has_feature(CPU_FTR_ARCH_31)) {
+			/* P10 DD1 does not have HAIL */
+			if (pvr_version_is(PVR_POWER10) &&
+					(mfspr(SPRN_PVR) & 0xf00) == 0x100)
+				new_lpcr |= LPCR_AIL_3;
+			else
+				new_lpcr |= LPCR_HAIL;
+		} else if (cpu_has_feature(CPU_FTR_ARCH_207S)) {
+			new_lpcr |= LPCR_AIL_3;
+		}
+
+		if (new_lpcr != lpcr)
+			mtspr(SPRN_LPCR, new_lpcr);
 	}
 
 	/*
Signature · 1 line
2.23.0
author reviewer
#4 lore raw

Excerpts from Michael Ellerman's message of April 7, 2021 9:33 pm:

Quoted 15 lines
Quoted 7 lines · Nicholas Piggin

Starting with ISA v3.1, LPCR[AIL] no longer controls the interrupt mode for HV=1 interrupts. Instead, a new LPCR[HAIL] bit is defined which behaves like AIL=3 for HV interrupts when set.

Set HAIL on bare metal to give us mmu-on interrupts and improve performance.

Quoted 6 lines

This also fixes an scv bug: we don't implement scv real mode (AIL=0) vectors because they are at an inconvenient location, so we just disable scv support when AIL can not be set. However powernv assumes that LPCR[AIL] will enable AIL mode so it enables scv support despite HV interrupts being AIL=0, which causes scv interrupts to go off into the weeds.

Quoted 2 lines

Should we tag this as fixing the initial P10 support, or the scv support? Or neither?

Good question. It does fix a nasty crash with scv so at least it should be tagged I guess.

I don't know of anything else that assumes AIL on bare metal, so I don't know of a crashy bug it fixes with initial P10 support. But it is a bit odd for a HV OS running a v3.1 processor to set the old LPCR AIL bits, so it is some kind of bug fix (performance at least).

Could go either way I guess.

Thanks,
Nick

Quoted 49 lines

cheers

Quoted 45 lines
arch/powerpc/include/asm/reg.h +1 -0
index 1be20bc8dce2..9086a2644c89 100644
@@ -441,6 +441,7 @@
 #define   LPCR_VRMA_LP1		ASM_CONST(0x0000800000000000)
 #define   LPCR_RMLS		0x1C000000	/* Implementation dependent RMO limit sel */
 #define   LPCR_RMLS_SH		26
+#define   LPCR_HAIL		ASM_CONST(0x0000000004000000)   /* HV AIL (ISAv3.1) */
 #define   LPCR_ILE		ASM_CONST(0x0000000002000000)   /* !HV irqs set MSR:LE */
 #define   LPCR_AIL		ASM_CONST(0x0000000001800000)	/* Alternate interrupt location */
 #define   LPCR_AIL_0		ASM_CONST(0x0000000000000000)	/* MMU off exception offset 0x0 */
arch/powerpc/kernel/setup_64.c +16 -3
index 04a31586f760..671192afcdfd 100644
@@ -233,10 +233,23 @@ static void cpu_ready_for_interrupts(void)
 	 * If we are not in hypervisor mode the job is done once for
 	 * the whole partition in configure_exceptions().
 	 */
-	if (cpu_has_feature(CPU_FTR_HVMODE) &&
-	    cpu_has_feature(CPU_FTR_ARCH_207S)) {
+	if (cpu_has_feature(CPU_FTR_HVMODE)) {
 		unsigned long lpcr = mfspr(SPRN_LPCR);
-		mtspr(SPRN_LPCR, lpcr | LPCR_AIL_3);
+		unsigned long new_lpcr = lpcr;
+
+		if (cpu_has_feature(CPU_FTR_ARCH_31)) {
+			/* P10 DD1 does not have HAIL */
+			if (pvr_version_is(PVR_POWER10) &&
+					(mfspr(SPRN_PVR) & 0xf00) == 0x100)
+				new_lpcr |= LPCR_AIL_3;
+			else
+				new_lpcr |= LPCR_HAIL;
+		} else if (cpu_has_feature(CPU_FTR_ARCH_207S)) {
+			new_lpcr |= LPCR_AIL_3;
+		}
+
+		if (new_lpcr != lpcr)
+			mtspr(SPRN_LPCR, new_lpcr);
 	}
 
 	/*
Signature · 1 line
2.23.0
#5 lore raw
In reply to Nicholas Piggin
Quoted 8 lines · Nicholas Piggin

Starting with ISA v3.1, LPCR[AIL] no longer controls the interrupt mode for HV=1 interrupts. Instead, a new LPCR[HAIL] bit is defined which behaves like AIL=3 for HV interrupts when set.

Set HAIL on bare metal to give us mmu-on interrupts and improve performance.

[...]

Applied to powerpc/next.

[1/1] powerpc/powernv: Enable HAIL (HV AIL) for ISA v3.1 processors

      https://git.kernel.org/powerpc/c/49c1d07fd04f54eb588c4a1dfcedc8d22c5ffd50

cheers