Skip to contentSkip to conversation

watchdog: imx_sc_wdt: fix pretimeout

PATCH Superseded [email protected] 2 participants 2 messages Apr 6, 2021

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH v2 1/1 watchdog: imx_sc_wdt: fix pretimeout

From: Stefan Eichenberger <[email protected]>

If the WDIOF_PRETIMEOUT flag is not set when registering the device the driver will not show the sysfs entries or register the default governor. By moving the registering after the decision whether pretimeout is supported this gets fixed.

---
 drivers/watchdog/imx_sc_wdt.c | 11 ++++-------
 1 file changed, 4 insertions(+), 7 deletions(-)
drivers/watchdog/imx_sc_wdt.c +4 -7
index e9ee22a7cb45..8ac021748d16 100644
@@ -183,16 +183,12 @@ static int imx_sc_wdt_probe(struct platform_device *pdev)
 	watchdog_stop_on_reboot(wdog);
 	watchdog_stop_on_unregister(wdog);
 
-	ret = devm_watchdog_register_device(dev, wdog);
-	if (ret)
-		return ret;
-
 	ret = imx_scu_irq_group_enable(SC_IRQ_GROUP_WDOG,
 				       SC_IRQ_WDOG,
 				       true);
 	if (ret) {
 		dev_warn(dev, "Enable irq failed, pretimeout NOT supported\n");
-		return 0;
+		goto register_device;
 	}
 
 	imx_sc_wdd->wdt_notifier.notifier_call = imx_sc_wdt_notify;
@@ -203,7 +199,7 @@ static int imx_sc_wdt_probe(struct platform_device *pdev)
 					 false);
 		dev_warn(dev,
 			 "Register irq notifier failed, pretimeout NOT supported\n");
-		return 0;
+		goto register_device;
 	}
 
 	ret = devm_add_action_or_reset(dev, imx_sc_wdt_action,
@@ -213,7 +209,8 @@ static int imx_sc_wdt_probe(struct platform_device *pdev)
 	else
 		dev_warn(dev, "Add action failed, pretimeout NOT supported\n");
 
-	return 0;
+register_device:
+	return devm_watchdog_register_device(dev, wdog);
 }
 
 static int __maybe_unused imx_sc_wdt_suspend(struct device *dev)
Signature · 1 line
2.27.0
maintainer Reviewed-by on v2 1/1
#1 lore raw
Quoted 8 lines · On 4/6/21 5:12 AM, [email protected] wrote:

From: Stefan Eichenberger <[email protected]>

If the WDIOF_PRETIMEOUT flag is not set when registering the device the driver will not show the sysfs entries or register the default governor. By moving the registering after the decision whether pretimeout is supported this gets fixed.

Quoted 46 lines
---
 drivers/watchdog/imx_sc_wdt.c | 11 ++++-------
 1 file changed, 4 insertions(+), 7 deletions(-)
drivers/watchdog/imx_sc_wdt.c +4 -7
index e9ee22a7cb45..8ac021748d16 100644
@@ -183,16 +183,12 @@ static int imx_sc_wdt_probe(struct platform_device *pdev)
 	watchdog_stop_on_reboot(wdog);
 	watchdog_stop_on_unregister(wdog);
 
-	ret = devm_watchdog_register_device(dev, wdog);
-	if (ret)
-		return ret;
-
 	ret = imx_scu_irq_group_enable(SC_IRQ_GROUP_WDOG,
 				       SC_IRQ_WDOG,
 				       true);
 	if (ret) {
 		dev_warn(dev, "Enable irq failed, pretimeout NOT supported\n");
-		return 0;
+		goto register_device;
 	}
 
 	imx_sc_wdd->wdt_notifier.notifier_call = imx_sc_wdt_notify;
@@ -203,7 +199,7 @@ static int imx_sc_wdt_probe(struct platform_device *pdev)
 					 false);
 		dev_warn(dev,
 			 "Register irq notifier failed, pretimeout NOT supported\n");
-		return 0;
+		goto register_device;
 	}
 
 	ret = devm_add_action_or_reset(dev, imx_sc_wdt_action,
@@ -213,7 +209,8 @@ static int imx_sc_wdt_probe(struct platform_device *pdev)
 	else
 		dev_warn(dev, "Add action failed, pretimeout NOT supported\n");
 
-	return 0;
+register_device:
+	return devm_watchdog_register_device(dev, wdog);
 }
 
 static int __maybe_unused imx_sc_wdt_suspend(struct device *dev)