Skip to contentSkip to conversation

Bluetooth: Add support for virtio transport driver

PATCH In review Marcel Holtmann 4 participants 5 messages Apr 6, 2021 – May 25, 2021

Subsystems (2)
lore
Share & tools
lore

Marcel Holtmann

author maintainer
#0 lore raw

PATCH 1/1 Bluetooth: Add support for virtio transport driver

This adds support for Bluetooth HCI transport over virtio.

---
 drivers/bluetooth/Kconfig       |  10 +
 drivers/bluetooth/Makefile      |   2 +
 drivers/bluetooth/virtio_bt.c   | 401 ++++++++++++++++++++++++++++++++
 include/uapi/linux/virtio_bt.h  |  31 +++
 include/uapi/linux/virtio_ids.h |   1 +
 5 files changed, 445 insertions(+)
 create mode 100644 drivers/bluetooth/virtio_bt.c
 create mode 100644 include/uapi/linux/virtio_bt.h
drivers/bluetooth/Kconfig +10 -0
index 4e73a531b377..851842372c9b 100644
@@ -425,4 +425,14 @@ config BT_HCIRSI
 	  Say Y here to compile support for HCI over Redpine into the
 	  kernel or say M to compile as a module.
 
+config BT_VIRTIO
+	tristate "Virtio Bluetooth driver"
+	depends on VIRTIO
+	help
+	  Virtio Bluetooth support driver.
+	  This driver supports Virtio Bluetooth devices.
+
+	  Say Y here to compile support for HCI over Virtio into the
+	  kernel or say M to compile as a module.
+
 endmenu
drivers/bluetooth/Makefile +2 -0
index 1a58a3ae142c..16286ea2655d 100644
@@ -26,6 +26,8 @@ obj-$(CONFIG_BT_BCM)		+= btbcm.o
 obj-$(CONFIG_BT_RTL)		+= btrtl.o
 obj-$(CONFIG_BT_QCA)		+= btqca.o
 
+obj-$(CONFIG_BT_VIRTIO)		+= virtio_bt.o
+
 obj-$(CONFIG_BT_HCIUART_NOKIA)	+= hci_nokia.o
 
 obj-$(CONFIG_BT_HCIRSI)		+= btrsi.o
drivers/bluetooth/virtio_bt.c new file +401 -0

401 lines not on this page · raw message

include/uapi/linux/virtio_bt.h new file +31 -0
new file mode 100644
index 000000000000..0cedceaacf88
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: BSD-3-Clause
+
+#ifndef _UAPI_LINUX_VIRTIO_BT_H
+#define _UAPI_LINUX_VIRTIO_BT_H
+
+#include <linux/virtio_types.h>
+
+/* Feature bits */
+#define VIRTIO_BT_F_VND_HCI	0	/* Indicates vendor command support */
+#define VIRTIO_BT_F_MSFT_EXT	1	/* Indicates MSFT vendor support */
+#define VIRTIO_BT_F_AOSP_EXT	2	/* Indicates AOSP vendor support */
+
+enum virtio_bt_config_type {
+	VIRTIO_BT_CONFIG_TYPE_PRIMARY	= 0,
+	VIRTIO_BT_CONFIG_TYPE_AMP	= 1,
+};
+
+enum virtio_bt_config_vendor {
+	VIRTIO_BT_CONFIG_VENDOR_NONE	= 0,
+	VIRTIO_BT_CONFIG_VENDOR_ZEPHYR	= 1,
+	VIRTIO_BT_CONFIG_VENDOR_INTEL	= 2,
+	VIRTIO_BT_CONFIG_VENDOR_REALTEK	= 3,
+};
+
+struct virtio_bt_config {
+	__u8  type;
+	__u16 vendor;
+	__u16 msft_opcode;
+} __attribute__((packed));
+
+#endif /* _UAPI_LINUX_VIRTIO_BT_H */
include/uapi/linux/virtio_ids.h +1 -0
index bc1c0621f5ed..b4f468e9441d 100644
@@ -53,6 +53,7 @@
 #define VIRTIO_ID_MEM			24 /* virtio mem */
 #define VIRTIO_ID_FS			26 /* virtio filesystem */
 #define VIRTIO_ID_PMEM			27 /* virtio pmem */
+#define VIRTIO_ID_BT			28 /* virtio bluetooth */
 #define VIRTIO_ID_MAC80211_HWSIM	29 /* virtio mac80211-hwsim */
 
 #endif /* _LINUX_VIRTIO_IDS_H */
Signature · 1 line
2.30.2
#1 lore raw

This is automated email and please do not reply to this email!

Dear submitter,

Thank you for submitting the patches to the linux bluetooth mailing list. This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=461599

---Test result---

##############################
Test: CheckPatch - FAIL
Bluetooth: Add support for virtio transport driver
WARNING: added, moved or deleted file(s), does MAINTAINERS need updating? #43:
new file mode 100644

WARNING: Improper SPDX comment style for 'include/uapi/linux/virtio_bt.h', please use '/*' instead #455: FILE: include/uapi/linux/virtio_bt.h:1:
+// SPDX-License-Identifier: BSD-3-Clause

WARNING: Missing or malformed SPDX-License-Identifier tag in line 1 #455: FILE: include/uapi/linux/virtio_bt.h:1:
+// SPDX-License-Identifier: BSD-3-Clause

total: 0 errors, 3 warnings, 461 lines checked

NOTE: For some of the reported defects, checkpatch may be able to
mechanically convert to the typical style using --fix or --fix-inplace.

"[PATCH] Bluetooth: Add support for virtio transport driver" has style problems, please review.

NOTE: If any of the errors are false positives, please report
them to the maintainer, see CHECKPATCH in MAINTAINERS.

##############################
Test: CheckGitLint - PASS

##############################
Test: CheckBuildK - PASS

##############################
Test: CheckTestRunner: Setup - PASS

##############################
Test: CheckTestRunner: l2cap-tester - PASS
Total: 40, Passed: 34 (85.0%), Failed: 0, Not Run: 6

##############################
Test: CheckTestRunner: bnep-tester - PASS
Total: 1, Passed: 1 (100.0%), Failed: 0, Not Run: 0

##############################
Test: CheckTestRunner: mgmt-tester - PASS
Total: 416, Passed: 402 (96.6%), Failed: 0, Not Run: 14

##############################
Test: CheckTestRunner: rfcomm-tester - PASS
Total: 9, Passed: 9 (100.0%), Failed: 0, Not Run: 0

##############################
Test: CheckTestRunner: sco-tester - PASS
Total: 8, Passed: 8 (100.0%), Failed: 0, Not Run: 0

##############################
Test: CheckTestRunner: smp-tester - PASS
Total: 8, Passed: 8 (100.0%), Failed: 0, Not Run: 0

##############################
Test: CheckTestRunner: userchan-tester - PASS
Total: 3, Passed: 3 (100.0%), Failed: 0, Not Run: 0

---
Regards,
Linux Bluetooth

c[?7lSeaBIOS (version 1.13.0-1ubuntu1.1) Booting from ROM..c[?7learly console in extract_kernel
input_data: 0x0000000001e732e0
input_len: 0x000000000035338a
output: 0x0000000001000000
output_len: 0x00000000011944cc
kernel_total_size: 0x0000000001030000
needed_size: 0x0000000001200000
trampoline_32bit: 0x000000000009d000
Physical KASLR using RDTSC...
Virtual KASLR using RDTSC...

Decompressing Linux... Parsing ELF... Performing relocations... done.
Booting the kernel.
Linux version 5.11.0-g20f684290890 (root@9753153a6872) (gcc (Ubuntu 9.3.0-17ubuntu1~20.04) 9.3.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #2 Tue Apr 6 15:10:38 UTC 2021
Command line: console=ttyS0,115200n8 earlyprintk=serial rootfstype=9p rootflags=trans=virtio,version=9p2000.L acpi=off pci=noacpi noapic quiet ro init=/github/workspace/bluez/tools/test-runner TESTHOME=/github/workspace TESTDBUS=0 TESTMONITOR=0 TESTDEVS=0 TESTAUTO=0 TESTARGS='/github/workspace/bluez/tools/l2cap-tester' x86/fpu: x87 FPU will use FXSAVE
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000000bffdfff] usable
BIOS-e820: [mem 0x000000000bffe000-0x000000000bffffff] reserved
BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
printk: bootconsole [earlyser0] enabled
Memory KASLR using RDTSC...
Poking KASLR using RDTSC...
Mounting sysfs to /sys
Mounting proc to /proc
Mounting devtmpfs to /dev
Creating /dev/pts
Mounting devpts to /dev/pts
Creating /dev/shm
Mounting tmpfs to /dev/shm
Mounting tmpfs to /run
Mounting tmpfs to /tmp
Mounting debugfs to /sys/kernel/debug
Linking /dev/fd to /proc/self/fd
Linking /dev/stdin to /proc/self/fd/0
Linking /dev/stdout to /proc/self/fd/1
Linking /dev/stderr to /proc/self/fd/2
Creating new session group leader
Setting controlling terminal
Creating /var/lib/bluetooth
Failed to create filesystem: No such file or directory
Creating /etc/bluetooth
Failed to create filesystem: No such file or directory
Creating /etc/dbus-1
Failed to create filesystem: No such file or directory
Creating /usr/share/dbus-1
Running command /github/workspace/bluez/tools/l2cap-tester
New process 38 created
Changing into directory /github/workspace

Basic L2CAP Socket - Success - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x05
    Manufacturer: 0x003f
    Supported settings: 0x000110ff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Basic L2CAP Socket - Success - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
Basic L2CAP Socket - Success - setup complete
Basic L2CAP Socket - Success - run
Basic L2CAP Socket - Success - test passed
Basic L2CAP Socket - Success - teardown
Index Removed callback

    Index: 0x0000

Basic L2CAP Socket - Success - teardown complete
Basic L2CAP Socket - Success - done

Non-connected getpeername - Failure - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x05
    Manufacturer: 0x003f
    Supported settings: 0x000110ff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Non-connected getpeername - Failure - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
Non-connected getpeername - Failure - setup complete Non-connected getpeername - Failure - run Non-connected getpeername - Failure - test passed Non-connected getpeername - Failure - teardown
Index Removed callback

    Index: 0x0000

Non-connected getpeername - Failure - teardown complete Non-connected getpeername - Failure - done

L2CAP BR/EDR Client - Success - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x05
    Manufacturer: 0x003f
    Supported settings: 0x000110ff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

L2CAP BR/EDR Client - Success - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
L2CAP BR/EDR Client - Success - setup complete
L2CAP BR/EDR Client - Success - run
Connect in progress
Successfully connected
L2CAP BR/EDR Client - Success - test passed
L2CAP BR/EDR Client - Success - teardown
Index Removed callback

    Index: 0x0000

L2CAP BR/EDR Client - Success - teardown complete
L2CAP BR/EDR Client - Success - done

L2CAP BR/EDR Client SSP - Success 1 - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x05
    Manufacturer: 0x003f
    Supported settings: 0x000110ff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

L2CAP BR/EDR Client SSP - Success 1 - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
Client enable SSP status 0x00
L2CAP BR/EDR Client SSP - Success 1 - setup complete L2CAP BR/EDR Client SSP - Success 1 - run
Connect in progress
Successfully connected
L2CAP BR/EDR Client SSP - Success 1 - test passed L2CAP BR/EDR Client SSP - Success 1 - teardown
Index Removed callback

    Index: 0x0000

L2CAP BR/EDR Client SSP - Success 1 - teardown complete L2CAP BR/EDR Client SSP - Success 1 - done

L2CAP BR/EDR Client SSP - Success 2 - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x05
    Manufacturer: 0x003f
    Supported settings: 0x000110ff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

L2CAP BR/EDR Client SSP - Success 2 - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
Client enable SSP status 0x00
L2CAP BR/EDR Client SSP - Success 2 - setup complete L2CAP BR/EDR Client SSP - Success 2 - run
Connect in progress
Successfully connected
L2CAP BR/EDR Client SSP - Success 2 - test passed L2CAP BR/EDR Client SSP - Success 2 - teardown
Index Removed callback

    Index: 0x0000

L2CAP BR/EDR Client SSP - Success 2 - teardown complete L2CAP BR/EDR Client SSP - Success 2 - done

L2CAP BR/EDR Client PIN Code - Success - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x05
    Manufacturer: 0x003f
    Supported settings: 0x000110ff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

L2CAP BR/EDR Client PIN Code - Success - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
L2CAP BR/EDR Client PIN Code - Success - setup complete L2CAP BR/EDR Client PIN Code - Success - run
Connect in progress
Successfully connected
L2CAP BR/EDR Client PIN Code - Success - test passed L2CAP BR/EDR Client PIN Code - Success - teardown
Index Removed callback

    Index: 0x0000

L2CAP BR/EDR Client PIN Code - Success - teardown complete L2CAP BR/EDR Client PIN Code - Success - done

L2CAP BR/EDR Client - Read Success - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x05
    Manufacturer: 0x003f
    Supported settings: 0x000110ff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

L2CAP BR/EDR Client - Read Success - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
L2CAP BR/EDR Client - Read Success - setup complete L2CAP BR/EDR Client - Read Success - run
Connect in progress
Successfully connected
L2CAP BR/EDR Client - Read Success - test passed L2CAP BR/EDR Client - Read Success - teardown
Index Removed callback

    Index: 0x0000

L2CAP BR/EDR Client - Read Success - teardown complete L2CAP BR/EDR Client - Read Success - done

L2CAP BR/EDR Client - Write Success - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x05
    Manufacturer: 0x003f
    Supported settings: 0x000110ff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

L2CAP BR/EDR Client - Write Success - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
L2CAP BR/EDR Client - Write Success - setup complete L2CAP BR/EDR Client - Write Success - run
Connect in progress
Successfully connected
L2CAP BR/EDR Client - Write Success - test passed L2CAP BR/EDR Client - Write Success - teardown
Index Removed callback

    Index: 0x0000

L2CAP BR/EDR Client - Write Success - teardown complete L2CAP BR/EDR Client - Write Success - done

L2CAP BR/EDR Client - Invalid PSM 1 - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x05
    Manufacturer: 0x003f
    Supported settings: 0x000110ff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

L2CAP BR/EDR Client - Invalid PSM 1 - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
L2CAP BR/EDR Client - Invalid PSM 1 - setup complete L2CAP BR/EDR Client - Invalid PSM 1 - run
Connect in progress
Connect failed: Connection refused (111)
L2CAP BR/EDR Client - Invalid PSM 1 - test passed L2CAP BR/EDR Client - Invalid PSM 1 - teardown
Index Removed callback

    Index: 0x0000

L2CAP BR/EDR Client - Invalid PSM 1 - teardown complete L2CAP BR/EDR Client - Invalid PSM 1 - done

L2CAP BR/EDR Client - Invalid PSM 2 - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x05
    Manufacturer: 0x003f
    Supported settings: 0x000110ff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

L2CAP BR/EDR Client - Invalid PSM 2 - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
L2CAP BR/EDR Client - Invalid PSM 2 - setup complete L2CAP BR/EDR Client - Invalid PSM 2 - run
Connect in progress
Connect failed: Connection refused (111)
L2CAP BR/EDR Client - Invalid PSM 2 - test passed L2CAP BR/EDR Client - Invalid PSM 2 - teardown
Index Removed callback

    Index: 0x0000

L2CAP BR/EDR Client - Invalid PSM 2 - teardown complete L2CAP BR/EDR Client - Invalid PSM 2 - done

L2CAP BR/EDR Client - Invalid PSM 3 - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x05
    Manufacturer: 0x003f
    Supported settings: 0x000110ff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

L2CAP BR/EDR Client - Invalid PSM 3 - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
Client enable SSP status 0x00
L2CAP BR/EDR Client - Invalid PSM 3 - setup complete L2CAP BR/EDR Client - Invalid PSM 3 - run
Connect in progress
Connect failed: Connection refused (111)
L2CAP BR/EDR Client - Invalid PSM 3 - test passed L2CAP BR/EDR Client - Invalid PSM 3 - teardown
Index Removed callback

    Index: 0x0000

L2CAP BR/EDR Client - Invalid PSM 3 - teardown complete L2CAP BR/EDR Client - Invalid PSM 3 - done

L2CAP BR/EDR Client - Socket Shut WR Success - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x05
    Manufacturer: 0x003f
    Supported settings: 0x000110ff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

L2CAP BR/EDR Client - Socket Shut WR Success - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
L2CAP BR/EDR Client - Socket Shut WR Success - setup complete L2CAP BR/EDR Client - Socket Shut WR Success - run
Connect in progress
Successfully connected
L2CAP BR/EDR Client - Socket Shut WR Success - test passed L2CAP BR/EDR Client - Socket Shut WR Success - teardown
Index Removed callback

    Index: 0x0000

L2CAP BR/EDR Client - Socket Shut WR Success - teardown complete L2CAP BR/EDR Client - Socket Shut WR Success - done

L2CAP BR/EDR Server - Success - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x05
    Manufacturer: 0x003f
    Supported settings: 0x000110ff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

L2CAP BR/EDR Server - Success - setup
Powering on controller
Controller powered on
L2CAP BR/EDR Server - Success - setup complete
L2CAP BR/EDR Server - Success - run
Listening for connections
New client connection with handle 0x002a
Sending L2CAP Request from client
Client received response code 0x03
L2CAP BR/EDR Server - Success - test passed
Successfully connected
L2CAP BR/EDR Server - Success - test passed
L2CAP BR/EDR Server - Success - teardown
Index Removed callback

    Index: 0x0000

L2CAP BR/EDR Server - Success - teardown complete
L2CAP BR/EDR Server - Success - done

L2CAP BR/EDR Server - Read Success - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x05
    Manufacturer: 0x003f
    Supported settings: 0x000110ff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

L2CAP BR/EDR Server - Read Success - setup
Powering on controller
Controller powered on
L2CAP BR/EDR Server - Read Success - setup complete L2CAP BR/EDR Server - Read Success - run
Listening for connections
New client connection with handle 0x002a Sending L2CAP Request from client
Client received response code 0x03
L2CAP BR/EDR Server - Read Success - test passed L2CAP BR/EDR Server - Read Success - teardown
Index Removed callback

    Index: 0x0000

L2CAP BR/EDR Server - Read Success - teardown complete L2CAP BR/EDR Server - Read Success - done

L2CAP BR/EDR Server - Write Success - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x05
    Manufacturer: 0x003f
    Supported settings: 0x000110ff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

L2CAP BR/EDR Server - Write Success - setup
Powering on controller
Controller powered on
L2CAP BR/EDR Server - Write Success - setup complete L2CAP BR/EDR Server - Write Success - run
Listening for connections
New client connection with handle 0x002a Sending L2CAP Request from client
Client received response code 0x03
L2CAP BR/EDR Server - Write Success - test passed L2CAP BR/EDR Server - Write Success - teardown
Index Removed callback

    Index: 0x0000

L2CAP BR/EDR Server - Write Success - teardown complete L2CAP BR/EDR Server - Write Success - done

L2CAP BR/EDR Server - Security Block - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x05
    Manufacturer: 0x003f
    Supported settings: 0x000110ff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

L2CAP BR/EDR Server - Security Block - setup
Powering on controller
Controller powered on
Server enable SSP status 0x00
L2CAP BR/EDR Server - Security Block - setup complete L2CAP BR/EDR Server - Security Block - run
Listening for connections
New client connection with handle 0x002a Sending L2CAP Request from client
Client received response code 0x03
L2CAP BR/EDR Server - Security Block - test passed L2CAP BR/EDR Server - Security Block - teardown
Index Removed callback

    Index: 0x0000

L2CAP BR/EDR Server - Security Block - teardown complete L2CAP BR/EDR Server - Security Block - done

L2CAP BR/EDR Server - Invalid PSM - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x05
    Manufacturer: 0x003f
    Supported settings: 0x000110ff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

L2CAP BR/EDR Server - Invalid PSM - setup
Powering on controller
Controller powered on
L2CAP BR/EDR Server - Invalid PSM - setup complete L2CAP BR/EDR Server - Invalid PSM - run
New client connection with handle 0x002a Sending L2CAP Request from client
Client received response code 0x03
L2CAP BR/EDR Server - Invalid PSM - test passed L2CAP BR/EDR Server - Invalid PSM - teardown
Index Removed callback

    Index: 0x0000

L2CAP BR/EDR Server - Invalid PSM - teardown complete L2CAP BR/EDR Server - Invalid PSM - done

L2CAP BR/EDR Server - Invalid PDU - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x05
    Manufacturer: 0x003f
    Supported settings: 0x000110ff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

L2CAP BR/EDR Server - Invalid PDU - setup
Powering on controller
Controller powered on
L2CAP BR/EDR Server - Invalid PDU - setup complete L2CAP BR/EDR Server - Invalid PDU - run
New client connection with handle 0x002a Sending L2CAP Request from client
Bluetooth: Wrong link type (-71)
Client received response code 0x01
L2CAP BR/EDR Server - Invalid PDU - test passed L2CAP BR/EDR Server - Invalid PDU - teardown
Index Removed callback

    Index: 0x0000

L2CAP BR/EDR Server - Invalid PDU - teardown complete L2CAP BR/EDR Server - Invalid PDU - done

L2CAP BR/EDR Server - Invalid Disconnect CID - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x05
    Manufacturer: 0x003f
    Supported settings: 0x000110ff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

L2CAP BR/EDR Server - Invalid Disconnect CID - setup
Powering on controller
Controller powered on
L2CAP BR/EDR Server - Invalid Disconnect CID - setup complete L2CAP BR/EDR Server - Invalid Disconnect CID - run
New client connection with handle 0x002a
Sending L2CAP Request from client
Client received response code 0x01
L2CAP BR/EDR Server - Invalid Disconnect CID - test passed L2CAP BR/EDR Server - Invalid Disconnect CID - teardown
Index Removed callback

    Index: 0x0000

L2CAP BR/EDR Server - Invalid Disconnect CID - teardown complete L2CAP BR/EDR Server - Invalid Disconnect CID - done

L2CAP BR/EDR Server - Invalid Config CID - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x05
    Manufacturer: 0x003f
    Supported settings: 0x000110ff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

L2CAP BR/EDR Server - Invalid Config CID - setup
Powering on controller
Controller powered on
L2CAP BR/EDR Server - Invalid Config CID - setup complete L2CAP BR/EDR Server - Invalid Config CID - run
New client connection with handle 0x002a Sending L2CAP Request from client
Client received response code 0x01
L2CAP BR/EDR Server - Invalid Config CID - test passed L2CAP BR/EDR Server - Invalid Config CID - teardown
Index Removed callback

    Index: 0x0000

L2CAP BR/EDR Server - Invalid Config CID - teardown complete L2CAP BR/EDR Server - Invalid Config CID - done

L2CAP LE Client - Success - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001be1b
    Current settings: 0x00000200
    Class: 0x000000
    Name: 
    Short name: 

L2CAP LE Client - Success - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
L2CAP LE Client - Success - setup complete
L2CAP LE Client - Success - run
Connect in progress
Successfully connected
L2CAP LE Client - Success - test passed
L2CAP LE Client - Success - teardown
Index Removed callback

    Index: 0x0000

L2CAP LE Client - Success - teardown complete
L2CAP LE Client - Success - done

L2CAP LE Client, Direct Advertising - Success - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001be1b
    Current settings: 0x00000200
    Class: 0x000000
    Name: 
    Short name: 

L2CAP LE Client, Direct Advertising - Success - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
L2CAP LE Client, Direct Advertising - Success - setup complete L2CAP LE Client, Direct Advertising - Success - run
Connect in progress
Received advertising parameters HCI command
L2CAP LE Client, Direct Advertising - Success - test passed L2CAP LE Client, Direct Advertising - Success - teardown
Index Removed callback

    Index: 0x0000

L2CAP LE Client, Direct Advertising - Success - teardown complete L2CAP LE Client, Direct Advertising - Success - done

L2CAP LE Client SMP - Success - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001be1b
    Current settings: 0x00000200
    Class: 0x000000
    Name: 
    Short name: 

L2CAP LE Client SMP - Success - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
L2CAP LE Client SMP - Success - setup complete
L2CAP LE Client SMP - Success - run
Connect in progress
Successfully connected
L2CAP LE Client SMP - Success - test passed
Bluetooth: hci0: link tx timeout
L2CAP LE Client SMP - Success - teardown
Index Removed callback

    Index: 0x0000

L2CAP LE Client SMP - Success - teardown complete
L2CAP LE Client SMP - Success - done

L2CAP LE Client - Command Reject - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001be1b
    Current settings: 0x00000200
    Class: 0x000000
    Name: 
    Short name: 

L2CAP LE Client - Command Reject - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
L2CAP LE Client - Command Reject - setup complete
L2CAP LE Client - Command Reject - run
Connect in progress
New connection with handle 0x002a
Connect failed: Connection refused (111)
L2CAP LE Client - Command Reject - test passed
L2CAP LE Client - Command Reject - teardown
Index Removed callback

    Index: 0x0000

L2CAP LE Client - Command Reject - teardown complete L2CAP LE Client - Command Reject - done

L2CAP LE Client - Connection Reject - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x05
    Manufacturer: 0x003f
    Supported settings: 0x000110ff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

L2CAP LE Client - Connection Reject - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
L2CAP LE Client - Connection Reject - setup complete L2CAP LE Client - Connection Reject - run
Can't connect socket: No route to host (113)
L2CAP LE Client - Connection Reject - test passed L2CAP LE Client - Connection Reject - teardown
Index Removed callback

    Index: 0x0000

L2CAP LE Client - Connection Reject - teardown complete L2CAP LE Client - Connection Reject - done

L2CAP LE Client - Close socket 1 - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001be1b
    Current settings: 0x00000200
    Class: 0x000000
    Name: 
    Short name: 

L2CAP LE Client - Close socket 1 - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
L2CAP LE Client - Close socket 1 - setup complete
L2CAP LE Client - Close socket 1 - run
Connect in progress, sk = 13
Will close socket during scan phase...
Checking whether scan was properly stopped...
L2CAP LE Client - Close socket 1 - test passed
L2CAP LE Client - Close socket 1 - teardown
Index Removed callback

    Index: 0x0000

L2CAP LE Client - Close socket 1 - teardown complete L2CAP LE Client - Close socket 1 - done

L2CAP LE Client - Close socket 2 - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001be1b
    Current settings: 0x00000200
    Class: 0x000000
    Name: 
    Short name: 

L2CAP LE Client - Close socket 2 - setup
Powering on controller
Controller powered on
L2CAP LE Client - Close socket 2 - setup complete
L2CAP LE Client - Close socket 2 - run
Connect in progress, sk = 13
Client set connectable status 0x00
Client set connectable status 0x00
L2CAP LE Client - Close socket 2 - test passed
L2CAP LE Client - Close socket 2 - teardown
Index Removed callback

    Index: 0x0000

L2CAP LE Client - Close socket 2 - teardown complete L2CAP LE Client - Close socket 2 - done

L2CAP LE Client - Open two sockets - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001be1b
    Current settings: 0x00000200
    Class: 0x000000
    Name: 
    Short name: 

L2CAP LE Client - Open two sockets - setup
Powering on controller
Controller powered on
L2CAP LE Client - Open two sockets - setup complete L2CAP LE Client - Open two sockets - run
Connect in progress, sk = 13
HCI Command 0x200b length 7
HCI Command 0x200c length 2
Connect in progress, sk = 14
HCI Command 0x200c length 2
Client set connectable status 0x00
HCI Command 0x200d length 25
HCI Command 0x2016 length 2
Successfully connected
Successfully connected
L2CAP LE Client - Open two sockets - test passed

(l2cap-tester:38): GLib-WARNING **: 15:10:46.063: Invalid file descriptor. L2CAP LE Client - Open two sockets - teardown
Index Removed callback

    Index: 0x0000

L2CAP LE Client - Open two sockets - teardown complete L2CAP LE Client - Open two sockets - done

L2CAP LE Client - Open two sockets close one - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001be1b
    Current settings: 0x00000200
    Class: 0x000000
    Name: 
    Short name: 

L2CAP LE Client - Open two sockets close one - setup
Powering on controller
Controller powered on
L2CAP LE Client - Open two sockets close one - setup complete L2CAP LE Client - Open two sockets close one - run
Connect in progress, sk = 13
HCI Command 0x200b length 7
HCI Command 0x200c length 2
Connect in progress, sk = 14
Closing first socket! 13
HCI Command 0x200c length 2
Client set connectable status 0x00
HCI Command 0x200d length 25
HCI Command 0x2016 length 2
Successfully connected
L2CAP LE Client - Open two sockets close one - test passed

(l2cap-tester:38): GLib-WARNING **: 15:10:46.097: Invalid file descriptor. L2CAP LE Client - Open two sockets close one - teardown
Index Removed callback

    Index: 0x0000

L2CAP LE Client - Open two sockets close one - teardown complete L2CAP LE Client - Open two sockets close one - done

L2CAP LE Client - Invalid PSM - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001be1b
    Current settings: 0x00000200
    Class: 0x000000
    Name: 
    Short name: 

L2CAP LE Client - Invalid PSM - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
L2CAP LE Client - Invalid PSM - setup complete
L2CAP LE Client - Invalid PSM - run
Connect in progress
Connect failed: Connection refused (111)
L2CAP LE Client - Invalid PSM - test passed
L2CAP LE Client - Invalid PSM - teardown
Index Removed callback

    Index: 0x0000

L2CAP LE Client - Invalid PSM - teardown complete
L2CAP LE Client - Invalid PSM - done

L2CAP LE Server - Success - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001be1b
    Current settings: 0x00000200
    Class: 0x000000
    Name: 
    Short name: 

L2CAP LE Server - Success - setup
Powering on controller
Controller powered on
L2CAP LE Server - Success - setup complete
L2CAP LE Server - Success - run
Listening for connections
New client connection with handle 0x002a
Sending L2CAP Request from client
Successfully connected
L2CAP LE Server - Success - test passed
Client received response code 0x15
L2CAP LE Server - Success - test passed
L2CAP LE Server - Success - teardown
Index Removed callback

    Index: 0x0000

L2CAP LE Server - Success - teardown complete
L2CAP LE Server - Success - done

L2CAP LE Server - Nval SCID - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001be1b
    Current settings: 0x00000200
    Class: 0x000000
    Name: 
    Short name: 

L2CAP LE Server - Nval SCID - setup
Powering on controller
Controller powered on
L2CAP LE Server - Nval SCID - setup complete
L2CAP LE Server - Nval SCID - run
Listening for connections
New client connection with handle 0x002a
Sending L2CAP Request from client
Client received response code 0x15
L2CAP LE Server - Nval SCID - test passed
L2CAP LE Server - Nval SCID - teardown
Index Removed callback

    Index: 0x0000

L2CAP LE Server - Nval SCID - teardown complete
L2CAP LE Server - Nval SCID - done

L2CAP Ext-Flowctl Client - Success - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001be1b
    Current settings: 0x00000200
    Class: 0x000000
    Name: 
    Short name: 

L2CAP Ext-Flowctl Client - Success - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
L2CAP Ext-Flowctl Client - Success - setup complete L2CAP Ext-Flowctl Client - Success - run
Can't set mode: Protocol not available (92)
L2CAP Ext-Flowctl Client - Success - test not run L2CAP Ext-Flowctl Client - Success - teardown
Index Removed callback

    Index: 0x0000

L2CAP Ext-Flowctl Client - Success - teardown complete L2CAP Ext-Flowctl Client - Success - done

L2CAP Ext-Flowctl Client, Direct Advertising - Success - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001be1b
    Current settings: 0x00000200
    Class: 0x000000
    Name: 
    Short name: 

L2CAP Ext-Flowctl Client, Direct Advertising - Success - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
L2CAP Ext-Flowctl Client, Direct Advertising - Success - setup complete L2CAP Ext-Flowctl Client, Direct Advertising - Success - run
Can't set mode: Protocol not available (92)
L2CAP Ext-Flowctl Client, Direct Advertising - Success - test not run L2CAP Ext-Flowctl Client, Direct Advertising - Success - teardown
Index Removed callback

    Index: 0x0000

L2CAP Ext-Flowctl Client, Direct Advertising - Success - teardown complete L2CAP Ext-Flowctl Client, Direct Advertising - Success - done

L2CAP Ext-Flowctl Client SMP - Success - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001be1b
    Current settings: 0x00000200
    Class: 0x000000
    Name: 
    Short name: 

L2CAP Ext-Flowctl Client SMP - Success - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
L2CAP Ext-Flowctl Client SMP - Success - setup complete L2CAP Ext-Flowctl Client SMP - Success - run
Can't set mode: Protocol not available (92)
L2CAP Ext-Flowctl Client SMP - Success - test not run L2CAP Ext-Flowctl Client SMP - Success - teardown
Index Removed callback

    Index: 0x0000

L2CAP Ext-Flowctl Client SMP - Success - teardown complete L2CAP Ext-Flowctl Client SMP - Success - done

L2CAP Ext-Flowctl Client - Command Reject - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001be1b
    Current settings: 0x00000200
    Class: 0x000000
    Name: 
    Short name: 

L2CAP Ext-Flowctl Client - Command Reject - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
L2CAP Ext-Flowctl Client - Command Reject - setup complete L2CAP Ext-Flowctl Client - Command Reject - run
Can't set mode: Protocol not available (92)
L2CAP Ext-Flowctl Client - Command Reject - test not run L2CAP Ext-Flowctl Client - Command Reject - teardown
Index Removed callback

    Index: 0x0000

L2CAP Ext-Flowctl Client - Command Reject - teardown complete L2CAP Ext-Flowctl Client - Command Reject - done

L2CAP Ext-Flowctl Client - Open two sockets - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001be1b
    Current settings: 0x00000200
    Class: 0x000000
    Name: 
    Short name: 

L2CAP Ext-Flowctl Client - Open two sockets - setup
Powering on controller
Controller powered on
L2CAP Ext-Flowctl Client - Open two sockets - setup complete L2CAP Ext-Flowctl Client - Open two sockets - run
Can't set mode: Protocol not available (92) Error in create_l2cap_sock
L2CAP Ext-Flowctl Client - Open two sockets - test not run L2CAP Ext-Flowctl Client - Open two sockets - teardown
Index Removed callback

    Index: 0x0000

L2CAP Ext-Flowctl Client - Open two sockets - teardown complete L2CAP Ext-Flowctl Client - Open two sockets - done

L2CAP Ext-Flowctl Client - Open two sockets close one - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001be1b
    Current settings: 0x00000200
    Class: 0x000000
    Name: 
    Short name: 

L2CAP Ext-Flowctl Client - Open two sockets close one - setup
Powering on controller
Controller powered on
L2CAP Ext-Flowctl Client - Open two sockets close one - setup complete L2CAP Ext-Flowctl Client - Open two sockets close one - run
Can't set mode: Protocol not available (92)
Error in create_l2cap_sock
L2CAP Ext-Flowctl Client - Open two sockets close one - test not run L2CAP Ext-Flowctl Client - Open two sockets close one - teardown
Index Removed callback

    Index: 0x0000

L2CAP Ext-Flowctl Client - Open two sockets close one - teardown complete L2CAP Ext-Flowctl Client - Open two sockets close one - done

L2CAP LE ATT Client - Success - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001be1b
    Current settings: 0x00000200
    Class: 0x000000
    Name: 
    Short name: 

L2CAP LE ATT Client - Success - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
L2CAP LE ATT Client - Success - setup complete
L2CAP LE ATT Client - Success - run
Connect in progress
Successfully connected
L2CAP LE ATT Client - Success - test passed
L2CAP LE ATT Client - Success - teardown
Index Removed callback

    Index: 0x0000

L2CAP LE ATT Client - Success - teardown complete
L2CAP LE ATT Client - Success - done

L2CAP LE ATT Server - Success - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001be1b
    Current settings: 0x00000200
    Class: 0x000000
    Name: 
    Short name: 

L2CAP LE ATT Server - Success - setup
Powering on controller
Controller powered on
L2CAP LE ATT Server - Success - setup complete
L2CAP LE ATT Server - Success - run
Listening for connections
New client connection with handle 0x002a
Successfully connected
L2CAP LE ATT Server - Success - test passed
L2CAP LE ATT Server - Success - teardown
Index Removed callback

    Index: 0x0000

L2CAP LE ATT Server - Success - teardown complete
L2CAP LE ATT Server - Success - done

Test Summary
------------

Basic L2CAP Socket - Success                         Passed       0.067 seconds
Non-connected getpeername - Failure                  Passed       0.025 seconds
L2CAP BR/EDR Client - Success                        Passed       0.033 seconds
L2CAP BR/EDR Client SSP - Success 1                  Passed       0.028 seconds
L2CAP BR/EDR Client SSP - Success 2                  Passed       0.023 seconds
L2CAP BR/EDR Client PIN Code - Success               Passed       0.019 seconds
L2CAP BR/EDR Client - Read Success                   Passed       0.018 seconds
L2CAP BR/EDR Client - Write Success                  Passed       0.018 seconds
L2CAP BR/EDR Client - Invalid PSM 1                  Passed       0.018 seconds
L2CAP BR/EDR Client - Invalid PSM 2                  Passed       0.018 seconds
L2CAP BR/EDR Client - Invalid PSM 3                  Passed       0.018 seconds
L2CAP BR/EDR Client - Socket Shut WR Success         Passed       0.020 seconds
L2CAP BR/EDR Server - Success                        Passed       0.026 seconds
L2CAP BR/EDR Server - Read Success                   Passed       0.022 seconds
L2CAP BR/EDR Server - Write Success                  Passed       0.021 seconds
L2CAP BR/EDR Server - Security Block                 Passed       0.019 seconds
L2CAP BR/EDR Server - Invalid PSM                    Passed       0.019 seconds
L2CAP BR/EDR Server - Invalid PDU                    Passed       0.021 seconds
L2CAP BR/EDR Server - Invalid Disconnect CID         Passed       0.018 seconds
L2CAP BR/EDR Server - Invalid Config CID             Passed       0.016 seconds
L2CAP LE Client - Success                            Passed       0.029 seconds
L2CAP LE Client, Direct Advertising - Success        Passed       0.019 seconds
L2CAP LE Client SMP - Success                        Passed       0.030 seconds
L2CAP LE Client - Command Reject                     Passed       0.016 seconds
L2CAP LE Client - Connection Reject                  Passed       0.014 seconds
L2CAP LE Client - Close socket 1                     Passed       0.015 seconds
L2CAP LE Client - Close socket 2                     Passed       0.015 seconds
L2CAP LE Client - Open two sockets                   Passed       0.053 seconds
L2CAP LE Client - Open two sockets close one         Passed       0.022 seconds
L2CAP LE Client - Invalid PSM                        Passed       0.023 seconds
L2CAP LE Server - Success                            Passed       0.026 seconds
L2CAP LE Server - Nval SCID                          Passed       0.016 seconds
L2CAP Ext-Flowctl Client - Success                   Not Run   
L2CAP Ext-Flowctl Client, Direct Advertising - Success Not Run   
L2CAP Ext-Flowctl Client SMP - Success               Not Run   
L2CAP Ext-Flowctl Client - Command Reject            Not Run   
L2CAP Ext-Flowctl Client - Open two sockets          Not Run   
L2CAP Ext-Flowctl Client - Open two sockets close one Not Run   
L2CAP LE ATT Client - Success                        Passed       0.014 seconds
L2CAP LE ATT Server - Success                        Passed       0.015 seconds

Total: 40, Passed: 34 (85.0%), Failed: 0, Not Run: 6 Overall execution time: 0.89 seconds
Process 38 exited with status 0
reboot: Restarting system

c[?7lSeaBIOS (version 1.13.0-1ubuntu1.1) Booting from ROM..c[?7learly console in extract_kernel
input_data: 0x0000000001e732e0
input_len: 0x000000000035338a
output: 0x0000000001000000
output_len: 0x00000000011944cc
kernel_total_size: 0x0000000001030000
needed_size: 0x0000000001200000
trampoline_32bit: 0x000000000009d000
Physical KASLR using RDTSC...
Virtual KASLR using RDTSC...

Decompressing Linux... Parsing ELF... Performing relocations... done.
Booting the kernel.
Linux version 5.11.0-g20f684290890 (root@9753153a6872) (gcc (Ubuntu 9.3.0-17ubuntu1~20.04) 9.3.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #2 Tue Apr 6 15:10:38 UTC 2021
Command line: console=ttyS0,115200n8 earlyprintk=serial rootfstype=9p rootflags=trans=virtio,version=9p2000.L acpi=off pci=noacpi noapic quiet ro init=/github/workspace/bluez/tools/test-runner TESTHOME=/github/workspace TESTDBUS=0 TESTMONITOR=0 TESTDEVS=0 TESTAUTO=0 TESTARGS='/github/workspace/bluez/tools/bnep-tester' x86/fpu: x87 FPU will use FXSAVE
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000000bffdfff] usable
BIOS-e820: [mem 0x000000000bffe000-0x000000000bffffff] reserved
BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
printk: bootconsole [earlyser0] enabled
Memory KASLR using RDTSC...
Poking KASLR using RDTSC...
Mounting sysfs to /sys
Mounting proc to /proc
Mounting devtmpfs to /dev
Creating /dev/pts
Mounting devpts to /dev/pts
Creating /dev/shm
Mounting tmpfs to /dev/shm
Mounting tmpfs to /run
Mounting tmpfs to /tmp
Mounting debugfs to /sys/kernel/debug
Linking /dev/fd to /proc/self/fd
Linking /dev/stdin to /proc/self/fd/0
Linking /dev/stdout to /proc/self/fd/1
Linking /dev/stderr to /proc/self/fd/2
Creating new session group leader
Setting controlling terminal
Creating /var/lib/bluetooth
Failed to create filesystem: No such file or directory
Creating /etc/bluetooth
Failed to create filesystem: No such file or directory
Creating /etc/dbus-1
Failed to create filesystem: No such file or directory
Creating /usr/share/dbus-1
Running command /github/workspace/bluez/tools/bnep-tester
New process 38 created
Changing into directory /github/workspace

Basic BNEP Socket - Success - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x05
    Manufacturer: 0x003f
    Supported settings: 0x000110ff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Basic BNEP Socket - Success - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
Basic BNEP Socket - Success - setup complete
Basic BNEP Socket - Success - run
Basic BNEP Socket - Success - test passed
Basic BNEP Socket - Success - teardown
Index Removed callback

    Index: 0x0000

Basic BNEP Socket - Success - teardown complete
Basic BNEP Socket - Success - done

Test Summary
------------
Basic BNEP Socket - Success Passed 0.063 seconds
Total: 1, Passed: 1 (100.0%), Failed: 0, Not Run: 0 Overall execution time: 0.0713 seconds Process 38 exited with status 0
reboot: Restarting system

c[?7lSeaBIOS (version 1.13.0-1ubuntu1.1) Booting from ROM..c[?7learly console in extract_kernel
input_data: 0x0000000001e732e0
input_len: 0x000000000035338a
output: 0x0000000001000000
output_len: 0x00000000011944cc
kernel_total_size: 0x0000000001030000
needed_size: 0x0000000001200000
trampoline_32bit: 0x000000000009d000
Physical KASLR using RDTSC...
Virtual KASLR using RDTSC...

Decompressing Linux... Parsing ELF... Performing relocations... done.
Booting the kernel.
Linux version 5.11.0-g20f684290890 (root@9753153a6872) (gcc (Ubuntu 9.3.0-17ubuntu1~20.04) 9.3.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #2 Tue Apr 6 15:10:38 UTC 2021
Command line: console=ttyS0,115200n8 earlyprintk=serial rootfstype=9p rootflags=trans=virtio,version=9p2000.L acpi=off pci=noacpi noapic quiet ro init=/github/workspace/bluez/tools/test-runner TESTHOME=/github/workspace TESTDBUS=0 TESTMONITOR=0 TESTDEVS=0 TESTAUTO=0 TESTARGS='/github/workspace/bluez/tools/mgmt-tester' x86/fpu: x87 FPU will use FXSAVE
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000000bffdfff] usable
BIOS-e820: [mem 0x000000000bffe000-0x000000000bffffff] reserved
BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
printk: bootconsole [earlyser0] enabled
Memory KASLR using RDTSC...
Poking KASLR using RDTSC...
Mounting sysfs to /sys
Mounting proc to /proc
Mounting devtmpfs to /dev
Creating /dev/pts
Mounting devpts to /dev/pts
Creating /dev/shm
Mounting tmpfs to /dev/shm
Mounting tmpfs to /run
Mounting tmpfs to /tmp
Mounting debugfs to /sys/kernel/debug
Linking /dev/fd to /proc/self/fd
Linking /dev/stdin to /proc/self/fd/0
Linking /dev/stdout to /proc/self/fd/1
Linking /dev/stderr to /proc/self/fd/2
Creating new session group leader
Setting controlling terminal
Creating /var/lib/bluetooth
Failed to create filesystem: No such file or directory
Creating /etc/bluetooth
Failed to create filesystem: No such file or directory
Creating /etc/dbus-1
Failed to create filesystem: No such file or directory
Creating /usr/share/dbus-1
Running command /github/workspace/bluez/tools/mgmt-tester
New process 38 created
Changing into directory /github/workspace

Controller setup - init
Read Version callback

    Status: Success (0x00)
    Version 1.20
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Controller setup - setup
Controller setup - setup complete
Controller setup - run
Controller setup - test passed
Controller setup - teardown
Index Removed callback

    Index: 0x0000

Controller setup - teardown complete
Controller setup - done

Controller setup (BR/EDR-only) - init
Read Version callback

    Status: Success (0x00)
    Version 1.20
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x05
    Manufacturer: 0x003f
    Supported settings: 0x000110ff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Controller setup (BR/EDR-only) - setup
Controller setup (BR/EDR-only) - setup complete
Controller setup (BR/EDR-only) - run
Controller setup (BR/EDR-only) - test passed
Controller setup (BR/EDR-only) - teardown
Index Removed callback

    Index: 0x0000

Controller setup (BR/EDR-only) - teardown complete Controller setup (BR/EDR-only) - done

Controller setup (LE) - init
Read Version callback

    Status: Success (0x00)
    Version 1.20
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001be1b
    Current settings: 0x00000200
    Class: 0x000000
    Name: 
    Short name: 

Controller setup (LE) - setup
Controller setup (LE) - setup complete
Controller setup (LE) - run
Controller setup (LE) - test passed
Controller setup (LE) - teardown
Index Removed callback

    Index: 0x0000

Controller setup (LE) - teardown complete
Controller setup (LE) - done

Invalid command - init
Read Version callback

    Status: Success (0x00)
    Version 1.20
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Invalid command - setup
Invalid command - setup complete
Invalid command - run
Sending <unknown opcode> (0xffff)
Test condition added, total 1
<unknown opcode> (0xffff): Unknown Command (0x01) Test condition complete, 0 left
Invalid command - test passed
Invalid command - teardown
Index Removed callback

    Index: 0x0000

Invalid command - teardown complete
Invalid command - done

Read version - Success - init
Read Version callback

    Status: Success (0x00)
    Version 1.20
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Read version - Success - setup
Read version - Success - setup complete
Read version - Success - run
Sending Read Version (0x0001)
Test condition added, total 1
Read Version (0x0001): Success (0x00)
Test condition complete, 0 left
Read version - Success - test passed
Read version - Success - teardown
Index Removed callback

    Index: 0x0000

Read version - Success - teardown complete
Read version - Success - done

Read version - Invalid parameters - init
Read Version callback

    Status: Success (0x00)
    Version 1.20
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Read version - Invalid parameters - setup Read version - Invalid parameters - setup complete Read version - Invalid parameters - run
Sending Read Version (0x0001)
Test condition added, total 1
Read Version (0x0001): Invalid Parameters (0x0d) Test condition complete, 0 left
Read version - Invalid parameters - test passed Read version - Invalid parameters - teardown
Index Removed callback

    Index: 0x0000

Read version - Invalid parameters - teardown complete Read version - Invalid parameters - done

Read version - Invalid index - init
Read Version callback

    Status: Success (0x00)
    Version 1.20
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Read version - Invalid index - setup
Read version - Invalid index - setup complete
Read version - Invalid index - run
Sending Read Version (0x0001)
Test condition added, total 1
Read Version (0x0001): Invalid Index (0x11)
Test condition complete, 0 left
Read version - Invalid index - test passed
Read version - Invalid index - teardown
Index Removed callback

    Index: 0x0000

Read version - Invalid index - teardown complete
Read version - Invalid index - done

Read commands - Invalid parameters - init
Read Version callback

    Status: Success (0x00)
    Version 1.20
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Read commands - Invalid parameters - setup Read commands - Invalid parameters - setup complete Read commands - Invalid parameters - run
Sending Read Commands (0x0002)
Test condition added, total 1
Read Commands (0x0002): Invalid Parameters (0x0d) Test condition complete, 0 left
Read commands - Invalid parameters - test passed Read commands - Invalid parameters - teardown
Index Removed callback

    Index: 0x0000

Read commands - Invalid parameters - teardown complete Read commands - Invalid parameters - done

Read commands - Invalid index - init
Read Version callback

    Status: Success (0x00)
    Version 1.20
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Read commands - Invalid index - setup
Read commands - Invalid index - setup complete
Read commands - Invalid index - run
Sending Read Commands (0x0002)
Test condition added, total 1
Read Commands (0x0002): Invalid Index (0x11)
Test condition complete, 0 left
Read commands - Invalid index - test passed
Read commands - Invalid index - teardown
Index Removed callback

    Index: 0x0000

Read commands - Invalid index - teardown complete
Read commands - Invalid index - done

Read index list - Invalid parameters - init
Read Version callback

    Status: Success (0x00)
    Version 1.20
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Read index list - Invalid parameters - setup Read index list - Invalid parameters - setup complete Read index list - Invalid parameters - run
Sending Read Index List (0x0003)
Test condition added, total 1
Read Index List (0x0003): Invalid Parameters (0x0d) Test condition complete, 0 left
Read index list - Invalid parameters - test passed Read index list - Invalid parameters - teardown
Index Removed callback

    Index: 0x0000

Read index list - Invalid parameters - teardown complete Read index list - Invalid parameters - done

Read index list - Invalid index - init
Read Version callback

    Status: Success (0x00)
    Version 1.20
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Read index list - Invalid index - setup
Read index list - Invalid index - setup complete
Read index list - Invalid index - run
Sending Read Index List (0x0003)
Test condition added, total 1
Read Index List (0x0003): Invalid Index (0x11)
Test condition complete, 0 left
Read index list - Invalid index - test passed
Read index list - Invalid index - teardown
Index Removed callback

    Index: 0x0000

Read index list - Invalid index - teardown complete Read index list - Invalid index - done

Read info - Invalid parameters - init
Read Version callback

    Status: Success (0x00)
    Version 1.20
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Read info - Invalid parameters - setup
Read info - Invalid parameters - setup complete Read info - Invalid parameters - run
Sending Read Controller Info (0x0004)
Test condition added, total 1
Read Controller Info (0x0004): Invalid Parameters (0x0d) Test condition complete, 0 left
Read info - Invalid parameters - test passed
Read info - Invalid parameters - teardown
Index Removed callback

    Index: 0x0000

Read info - Invalid parameters - teardown complete Read info - Invalid parameters - done

Read info - Invalid index - init
Read Version callback

    Status: Success (0x00)
    Version 1.20
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Read info - Invalid index - setup
Read info - Invalid index - setup complete Read info - Invalid index - run
Sending Read Controller Info (0x0004)
Test condition added, total 1
Read Controller Info (0x0004): Invalid Index (0x11) Test condition complete, 0 left
Read info - Invalid index - test passed
Read info - Invalid index - teardown
Index Removed callback

    Index: 0x0000

Read info - Invalid index - teardown complete
Read info - Invalid index - done

Read unconfigured index list - Invalid parameters - init
Read Version callback

    Status: Success (0x00)
    Version 1.20
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Read unconfigured index list - Invalid parameters - setup Read unconfigured index list - Invalid parameters - setup complete Read unconfigured index list - Invalid parameters - run
Sending Read Unconfigured Index List (0x0036)
Test condition added, total 1
Read Unconfigured Index List (0x0036): Invalid Parameters (0x0d) Test condition complete, 0 left
Read unconfigured index list - Invalid parameters - test passed Read unconfigured index list - Invalid parameters - teardown
Index Removed callback

    Index: 0x0000

Read unconfigured index list - Invalid parameters - teardown complete Read unconfigured index list - Invalid parameters - done

Read unconfigured index list - Invalid index - init
Read Version callback

    Status: Success (0x00)
    Version 1.20
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Read unconfigured index list - Invalid index - setup Read unconfigured index list - Invalid index - setup complete Read unconfigured index list - Invalid index - run
Sending Read Unconfigured Index List (0x0036) Test condition added, total 1
Read Unconfigured Index List (0x0036): Invalid Index (0x11) Test condition complete, 0 left
Read unconfigured index list - Invalid index - test passed Read unconfigured index list - Invalid index - teardown
Index Removed callback

    Index: 0x0000

Read unconfigured index list - Invalid index - teardown complete Read unconfigured index list - Invalid index - done

Read configuration info - Invalid parameters - init
Read Version callback

    Status: Success (0x00)
    Version 1.20
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Read configuration info - Invalid parameters - setup
Read configuration info - Invalid parameters - setup complete
Read configuration info - Invalid parameters - run
Sending Read Controller Configuration Information (0x0037)
Test condition added, total 1
Read Controller Configuration Information (0x0037): Invalid Parameters (0x0d) Test condition complete, 0 left
Read configuration info - Invalid parameters - test passed
Read configuration info - Invalid parameters - teardown
Index Removed callback

    Index: 0x0000

Read configuration info - Invalid parameters - teardown complete Read configuration info - Invalid parameters - done

Read configuration info - Invalid index - init
Read Version callback

    Status: Success (0x00)
    Version 1.20
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Read configuration info - Invalid index - setup
Read configuration info - Invalid index - setup complete
Read configuration info - Invalid index - run
Sending Read Controller Configuration Information (0x0037) Test condition added, total 1
Read Controller Configuration Information (0x0037): Invalid Index (0x11) Test condition complete, 0 left
Read configuration info - Invalid index - test passed
Read configuration info - Invalid index - teardown
Index Removed callback

    Index: 0x0000

Read configuration info - Invalid index - teardown complete Read configuration info - Invalid index - done

Read extended index list - Invalid parameters - init
Read Version callback

    Status: Success (0x00)
    Version 1.20
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Read extended index list - Invalid parameters - setup
Read extended index list - Invalid parameters - setup complete Read extended index list - Invalid parameters - run
Sending Read Extended Controller Index List (0x003c)
Test condition added, total 1
Read Extended Controller Index List (0x003c): Invalid Parameters (0x0d) Test condition complete, 0 left
Read extended index list - Invalid parameters - test passed Read extended index list - Invalid parameters - teardown
Index Removed callback

    Index: 0x0000

Read extended index list - Invalid parameters - teardown complete Read extended index list - Invalid parameters - done

Read extended index list - Invalid index - init
Read Version callback

    Status: Success (0x00)
    Version 1.20
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Read extended index list - Invalid index - setup
Read extended index list - Invalid index - setup complete Read extended index list - Invalid index - run
Sending Read Extended Controller Index List (0x003c) Test condition added, total 1
Read Extended Controller Index List (0x003c): Invalid Index (0x11) Test condition complete, 0 left
Read extended index list - Invalid index - test passed Read extended index list - Invalid index - teardown
Index Removed callback

    Index: 0x0000

Read extended index list - Invalid index - teardown complete Read extended index list - Invalid index - done

Set powered on - Success - init
Read Version callback

    Status: Success (0x00)
    Version 1.20
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set powered on - Success - setup
Set powered on - Success - setup complete
Set powered on - Success - run
Registering new settings notification
Test condition added, total 1
Sending Set Powered (0x0005)
Test condition added, total 2
Set Powered (0x0005): Success (0x00)
Test condition complete, 1 left
New settings 0x00000081 received
Unregistering new settings notification
Test condition complete, 0 left
Set powered on - Success - test passed
Set powered on - Success - teardown
New settings event received
Index Removed callback

    Index: 0x0000

Set powered on - Success - teardown complete
Set powered on - Success - done

Set powered on - Invalid parameters 1 - init
Read Version callback

    Status: Success (0x00)
    Version 1.20
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set powered on - Invalid parameters 1 - setup Set powered on - Invalid parameters 1 - setup complete Set powered on - Invalid parameters 1 - run
Sending Set Powered (0x0005)
Test condition added, total 1
Set Powered (0x0005): Invalid Parameters (0x0d) Test condition complete, 0 left
Set powered on - Invalid parameters 1 - test passed Set powered on - Invalid parameters 1 - teardown
Index Removed callback

    Index: 0x0000

Set powered on - Invalid parameters 1 - teardown complete Set powered on - Invalid parameters 1 - done

Set powered on - Invalid parameters 2 - init
Read Version callback

    Status: Success (0x00)
    Version 1.20
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set powered on - Invalid parameters 2 - setup Set powered on - Invalid parameters 2 - setup complete Set powered on - Invalid parameters 2 - run
Sending Set Powered (0x0005)
Test condition added, total 1
Set Powered (0x0005): Invalid Parameters (0x0d) Test condition complete, 0 left
Set powered on - Invalid parameters 2 - test passed Set powered on - Invalid parameters 2 - teardown
Index Removed callback

    Index: 0x0000

Set powered on - Invalid parameters 2 - teardown complete Set powered on - Invalid parameters 2 - done

Set powered on - Invalid parameters 3 - init
Read Version callback

    Status: Success (0x00)
    Version 1.20
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set powered on - Invalid parameters 3 - setup Set powered on - Invalid parameters 3 - setup complete Set powered on - Invalid parameters 3 - run
Sending Set Powered (0x0005)
Test condition added, total 1
Set Powered (0x0005): Invalid Parameters (0x0d) Test condition complete, 0 left
Set powered on - Invalid parameters 3 - test passed Set powered on - Invalid parameters 3 - teardown
Index Removed callback

    Index: 0x0000

Set powered on - Invalid parameters 3 - teardown complete Set powered on - Invalid parameters 3 - done

Set powered on - Invalid index - init
Read Version callback

    Status: Success (0x00)
    Version 1.20
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set powered on - Invalid index - setup
Set powered on - Invalid index - setup complete
Set powered on - Invalid index - run
Sending Set Powered (0x0005)
Test condition added, total 1
Set Powered (0x0005): Invalid Index (0x11)
Test condition complete, 0 left
Set powered on - Invalid index - test passed
Set powered on - Invalid index - teardown
Index Removed callback

    Index: 0x0000

Set powered on - Invalid index - teardown complete Set powered on - Invalid index - done

Set powered on - Privacy and Advertising - init
Read Version callback

    Status: Success (0x00)
    Version 1.20
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001be1b
    Current settings: 0x00000200
    Class: 0x000000
    Name: 
    Short name: 

Set powered on - Privacy and Advertising - setup
Initial settings completed
Client set connectable: Success (0x00)
Set powered on - Privacy and Advertising - setup complete Set powered on - Privacy and Advertising - run
Sending Set Advertising (0x0029)
Test condition added, total 1
Set Advertising (0x0029): Success (0x00)
Test condition complete, 0 left
Set powered on - Privacy and Advertising - test passed Set powered on - Privacy and Advertising - teardown
Index Removed callback

    Index: 0x0000

Set powered on - Privacy and Advertising - teardown complete Set powered on - Privacy and Advertising - done

Set powered off - Success - init
Read Version callback

    Status: Success (0x00)
    Version 1.20
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set powered off - Success - setup
Initial settings completed
Client set connectable: Success (0x00)
Set powered off - Success - setup complete
Set powered off - Success - run
Registering new settings notification
Test condition added, total 1
Sending Set Powered (0x0005)
Test condition added, total 2
Set Powered (0x0005): Success (0x00)
Test condition complete, 1 left
New settings 0x00000080 received
Unregistering new settings notification
Test condition complete, 0 left
Set powered off - Success - test passed
Set powered off - Success - teardown
Index Removed callback

    Index: 0x0000

Set powered off - Success - teardown complete
Set powered off - Success - done

Set powered off - Class of Device - init
Read Version callback

    Status: Success (0x00)
    Version 1.20
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set powered off - Class of Device - setup
Setting device class and powering on Controller powered on
Client set connectable: Success (0x00)
Set powered off - Class of Device - setup complete Set powered off - Class of Device - run
Registering new settings notification Test condition added, total 1 Registering Class of Device Changed notification Test condition added, total 2
Sending Set Powered (0x0005)
Test condition added, total 3
Set Powered (0x0005): Success (0x00) Test condition complete, 2 left
New Class of Device Changed event received Test condition complete, 1 left
New settings 0x00000080 received Unregistering new settings notification Test condition complete, 0 left
Set powered off - Class of Device - test passed Set powered off - Class of Device - teardown
Index Removed callback

    Index: 0x0000

Set powered off - Class of Device - teardown complete Set powered off - Class of Device - done

Set powered off - Invalid parameters 1 - init
Read Version callback

    Status: Success (0x00)
    Version 1.20
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set powered off - Invalid parameters 1 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set powered off - Invalid parameters 1 - setup complete Set powered off - Invalid parameters 1 - run
Sending Set Powered (0x0005)
Test condition added, total 1
Set Powered (0x0005): Invalid Parameters (0x0d) Test condition complete, 0 left
Set powered off - Invalid parameters 1 - test passed Set powered off - Invalid parameters 1 - teardown
Index Removed callback

    Index: 0x0000

Set powered off - Invalid parameters 1 - teardown complete Set powered off - Invalid parameters 1 - done

Set powered off - Invalid parameters 2 - init
Read Version callback

    Status: Success (0x00)
    Version 1.20
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set powered off - Invalid parameters 2 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set powered off - Invalid parameters 2 - setup complete Set powered off - Invalid parameters 2 - run
Sending Set Powered (0x0005)
Test condition added, total 1
Set Powered (0x0005): Invalid Parameters (0x0d) Test condition complete, 0 left
Set powered off - Invalid parameters 2 - test passed Set powered off - Invalid parameters 2 - teardown
Index Removed callback

    Index: 0x0000

Set powered off - Invalid parameters 2 - teardown complete Set powered off - Invalid parameters 2 - done

Set powered off - Invalid parameters 3 - init
Read Version callback

    Status: Success (0x00)
    Version 1.20
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set powered off - Invalid parameters 3 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set powered off - Invalid parameters 3 - setup complete Set powered off - Invalid parameters 3 - run
Sending Set Powered (0x0005)
Test condition added, total 1
Set Powered (0x0005): Invalid Parameters (0x0d) Test condition complete, 0 left
Set powered off - Invalid parameters 3 - test passed Set powered off - Invalid parameters 3 - teardown
Index Removed callback

    Index: 0x0000

Set powered off - Invalid parameters 3 - teardown complete Set powered off - Invalid parameters 3 - done

Set connectable on - Success 1 - init
Read Version callback

    Status: Success (0x00)
    Version 1.20
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set connectable on - Success 1 - setup
Set connectable on - Success 1 - setup complete
Set connectable on - Success 1 - run
Registering new settings notification
Test condition added, total 1
Sending Set Connectable (0x0007)
Test condition added, total 2
Set Connectable (0x0007): Success (0x00)
Test condition complete, 1 left
New settings 0x00000082 received
Unregistering new settings notification
Test condition complete, 0 left
Set connectable on - Success 1 - test passed
Set connectable on - Success 1 - teardown
Index Removed callback

    Index: 0x0000

Set connectable on - Success 1 - teardown complete Set connectable on - Success 1 - done

Set connectable on - Success 2 - init
Read Version callback

    Status: Success (0x00)
    Version 1.20
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set connectable on - Success 2 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set connectable on - Success 2 - setup complete
Set connectable on - Success 2 - run
Registering new settings notification
Test condition added, total 1
Registering HCI command callback
Test condition added, total 2
Sending Set Connectable (0x0007)
Test condition added, total 3
HCI Command 0x0c1a length 1
Test condition complete, 2 left
Set Connectable (0x0007): Success (0x00)
Test condition complete, 1 left
New settings 0x00000083 received
Unregistering new settings notification
Test condition complete, 0 left
Set connectable on - Success 2 - test passed
Set connectable on - Success 2 - teardown
New settings event received
Index Removed callback

    Index: 0x0000

Set connectable on - Success 2 - teardown complete Set connectable on - Success 2 - done

Set connectable on - Invalid parameters 1 - init
Read Version callback

    Status: Success (0x00)
    Version 1.20
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set connectable on - Invalid parameters 1 - setup Set connectable on - Invalid parameters 1 - setup complete Set connectable on - Invalid parameters 1 - run
Sending Set Connectable (0x0007)
Test condition added, total 1
Set Connectable (0x0007): Invalid Parameters (0x0d) Test condition complete, 0 left
Set connectable on - Invalid parameters 1 - test passed Set connectable on - Invalid parameters 1 - teardown
Index Removed callback

    Index: 0x0000

Set connectable on - Invalid parameters 1 - teardown complete Set connectable on - Invalid parameters 1 - done

Set connectable on - Invalid parameters 2 - init
Read Version callback

    Status: Success (0x00)
    Version 1.20
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set connectable on - Invalid parameters 2 - setup Set connectable on - Invalid parameters 2 - setup complete Set connectable on - Invalid parameters 2 - run
Sending Set Connectable (0x0007)
Test condition added, total 1
Set Connectable (0x0007): Invalid Parameters (0x0d) Test condition complete, 0 left
Set connectable on - Invalid parameters 2 - test passed Set connectable on - Invalid parameters 2 - teardown
Index Removed callback

    Index: 0x0000

Set connectable on - Invalid parameters 2 - teardown complete Set connectable on - Invalid parameters 2 - done

Set connectable on - Invalid parameters 3 - init
Read Version callback

    Status: Success (0x00)
    Version 1.20
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set connectable on - Invalid parameters 3 - setup Set connectable on - Invalid parameters 3 - setup complete Set connectable on - Invalid parameters 3 - run
Sending Set Connectable (0x0007)
Test condition added, total 1
Set Connectable (0x0007): Invalid Parameters (0x0d) Test condition complete, 0 left
Set connectable on - Invalid parameters 3 - test passed Set connectable on - Invalid parameters 3 - teardown
Index Removed callback

    Index: 0x0000

Set connectable on - Invalid parameters 3 - teardown complete Set connectable on - Invalid parameters 3 - done

Set connectable on - Invalid index - init
Read Version callback

    Status: Success (0x00)
    Version 1.20
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set connectable on - Invalid index - setup Set connectable on - Invalid index - setup complete Set connectable on - Invalid index - run
Sending Set Connectable (0x0007)
Test condition added, total 1
Set Connectable (0x0007): Invalid Index (0x11) Test condition complete, 0 left
Set connectable on - Invalid index - test passed Set connectable on - Invalid index - teardown
Index Removed callback

    Index: 0x0000

Set connectable on - Invalid index - teardown complete Set connectable on - Invalid index - done

Set connectable on (LE) - Success 1 - init
Read Version callback

    Status: Success (0x00)
    Version 1.20
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001be1b
    Current settings: 0x00000200
    Class: 0x000000
    Name: 
    Short name: 

Set connectable on (LE) - Success 1 - setup Set connectable on (LE) - Success 1 - setup complete Set connectable on (LE) - Success 1 - run
Registering new settings notification
Test condition added, total 1
Sending Set Connectable (0x0007)
Test condition added, total 2
Set Connectable (0x0007): Success (0x00) Test condition complete, 1 left
New settings 0x00000202 received Unregistering new settings notification Test condition complete, 0 left
Set connectable on (LE) - Success 1 - test passed Set connectable on (LE) - Success 1 - teardown
Index Removed callback

    Index: 0x0000

Set connectable on (LE) - Success 1 - teardown complete Set connectable on (LE) - Success 1 - done

Set connectable on (LE) - Success 2 - init
Read Version callback

    Status: Success (0x00)
    Version 1.20
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001be1b
    Current settings: 0x00000200
    Class: 0x000000
    Name: 
    Short name: 

Set connectable on (LE) - Success 2 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set connectable on (LE) - Success 2 - setup complete Set connectable on (LE) - Success 2 - run
Registering new settings notification
Test condition added, total 1
Sending Set Connectable (0x0007)
Test condition added, total 2
Set Connectable (0x0007): Success (0x00) Test condition complete, 1 left
New settings 0x00000203 received Unregistering new settings notification Test condition complete, 0 left
Set connectable on (LE) - Success 2 - test passed Set connectable on (LE) - Success 2 - teardown
New settings event received
Index Removed callback

    Index: 0x0000

Set connectable on (LE) - Success 2 - teardown complete Set connectable on (LE) - Success 2 - done

Set connectable on (LE) - Success 3 - init
Read Version callback

    Status: Success (0x00)
    Version 1.20
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001be1b
    Current settings: 0x00000200
    Class: 0x000000
    Name: 
    Short name: 

Set connectable on (LE) - Success 3 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set connectable on (LE) - Success 3 - setup complete Set connectable on (LE) - Success 3 - run
Registering new settings notification
Test condition added, total 1
Registering HCI command callback
Test condition added, total 2
Sending Set Connectable (0x0007)
Test condition added, total 3
HCI Command 0x200a length 1
HCI Command 0x2006 length 15
Test condition complete, 2 left
HCI Command 0x200a length 1
Set Connectable (0x0007): Success (0x00) Test condition complete, 1 left
New settings 0x00000603 received Unregistering new settings notification Test condition complete, 0 left
Set connectable on (LE) - Success 3 - test passed Set connectable on (LE) - Success 3 - teardown
New settings event received
Index Removed callback

    Index: 0x0000

Set connectable on (LE) - Success 3 - teardown complete Set connectable on (LE) - Success 3 - done

Set connectable off - Success 1 - init
Read Version callback

    Status: Success (0x00)
    Version 1.20
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set connectable off - Success 1 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set connectable off - Success 1 - setup complete
Set connectable off - Success 1 - run
Registering new settings notification
Test condition added, total 1
Sending Set Connectable (0x0007)
Test condition added, total 2
Set Connectable (0x0007): Success (0x00)
Test condition complete, 1 left
New settings 0x00000080 received
Unregistering new settings notification
Test condition complete, 0 left
Set connectable off - Success 1 - test passed
Set connectable off - Success 1 - teardown
Index Removed callback

    Index: 0x0000

Set connectable off - Success 1 - teardown complete Set connectable off - Success 1 - done

Set connectable off - Success 2 - init
Read Version callback

    Status: Success (0x00)
    Version 1.20
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set connectable off - Success 2 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set connectable off - Success 2 - setup complete
Set connectable off - Success 2 - run
Registering new settings notification
Test condition added, total 1
Registering HCI command callback
Test condition added, total 2
Sending Set Connectable (0x0007)
Test condition added, total 3
HCI Command 0x0c1a length 1
Test condition complete, 2 left
Set Connectable (0x0007): Success (0x00)
Test condition complete, 1 left
New settings 0x00000081 received
Unregistering new settings notification
Test condition complete, 0 left
Set connectable off - Success 2 - test passed
Set connectable off - Success 2 - teardown
New settings event received
Index Removed callback

    Index: 0x0000

Set connectable off - Success 2 - teardown complete Set connectable off - Success 2 - done

Set connectable off - Success 3 - init
Read Version callback

    Status: Success (0x00)
    Version 1.20
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set connectable off - Success 3 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set connectable off - Success 3 - setup complete
Set connectable off - Success 3 - run
Registering new settings notification
Test condition added, total 1
Registering HCI command callback
Test condition added, total 2
Sending Set Connectable (0x0007)
Test condition added, total 3
HCI Command 0x0c1a length 1
Test condition complete, 2 left
Set Connectable (0x0007): Success (0x00)
Test condition complete, 1 left
New settings 0x00000081 received
Unregistering new settings notification
Test condition complete, 0 left
Set connectable off - Success 3 - test passed
Set connectable off - Success 3 - teardown
New settings event received
Index Removed callback

    Index: 0x0000

Set connectable off - Success 3 - teardown complete Set connectable off - Success 3 - done

Set connectable off - Success 4 - init
Read Version callback

    Status: Success (0x00)
    Version 1.20
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set connectable off - Success 4 - setup
Initial settings completed
Powering on controller (with added device)
Controller powered on
Client set connectable: Success (0x00)
Set connectable off - Success 4 - setup complete
Set connectable off - Success 4 - run
Registering new settings notification
Test condition added, total 1
Registering HCI command callback
Test condition added, total 2
Sending Set Connectable (0x0007)
Test condition added, total 3
HCI Command 0x0c1a length 1
Test condition complete, 2 left
Set Connectable (0x0007): Success (0x00)
Test condition complete, 1 left
New settings 0x00000081 received
Unregistering new settings notification
Test condition complete, 0 left
Set connectable off - Success 4 - test passed
Set connectable off - Success 4 - teardown
New settings event received
Index Removed callback

    Index: 0x0000

Set connectable off - Success 4 - teardown complete Set connectable off - Success 4 - done

Set connectable off (LE) - Success 1 - init
Read Version callback

    Status: Success (0x00)
    Version 1.20
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001be1b
    Current settings: 0x00000200
    Class: 0x000000
    Name: 
    Short name: 

Set connectable off (LE) - Success 1 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set connectable off (LE) - Success 1 - setup complete Set connectable off (LE) - Success 1 - run
Registering new settings notification
Test condition added, total 1
Sending Set Connectable (0x0007)
Test condition added, total 2
Set Connectable (0x0007): Success (0x00) Test condition complete, 1 left
New settings 0x00000200 received Unregistering new settings notification Test condition complete, 0 left
Set connectable off (LE) - Success 1 - test passed Set connectable off (LE) - Success 1 - teardown
Index Removed callback

    Index: 0x0000

Set connectable off (LE) - Success 1 - teardown complete Set connectable off (LE) - Success 1 - done

Set connectable off (LE) - Success 2 - init
Read Version callback

    Status: Success (0x00)
    Version 1.20
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001be1b
    Current settings: 0x00000200
    Class: 0x000000
    Name: 
    Short name: 

Set connectable off (LE) - Success 2 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set connectable off (LE) - Success 2 - setup complete Set connectable off (LE) - Success 2 - run
Registering new settings notification
Test condition added, total 1
Registering HCI command callback
Test condition added, total 2
Sending Set Connectable (0x0007)
Test condition added, total 3
HCI Command 0x200a length 1
HCI Command 0x2005 length 6
HCI Command 0x2006 length 15
Test condition complete, 2 left
HCI Command 0x200a length 1
Set Connectable (0x0007): Success (0x00) Test condition complete, 1 left
New settings 0x00000601 received Unregistering new settings notification Test condition complete, 0 left
Set connectable off (LE) - Success 2 - test passed Set connectable off (LE) - Success 2 - teardown
New settings event received
Index Removed callback

    Index: 0x0000

Set connectable off (LE) - Success 2 - teardown complete Set connectable off (LE) - Success 2 - done

Set connectable off (LE) - Success 3 - init
Read Version callback

    Status: Success (0x00)
    Version 1.20
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001be1b
    Current settings: 0x00000200
    Class: 0x000000
    Name: 
    Short name: 

Set connectable off (LE) - Success 3 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set connectable off (LE) - Success 3 - setup complete Set connectable off (LE) - Success 3 - run
Registering new settings notification
Test condition added, total 1
Registering HCI command callback
Test condition added, total 2
Sending Set Connectable (0x0007)
Test condition added, total 3
HCI Command 0x2008 length 32
HCI Command 0x200a length 1
HCI Command 0x2005 length 6
HCI Command 0x2006 length 15
Test condition complete, 2 left
HCI Command 0x200a length 1
Set Connectable (0x0007): Success (0x00) Test condition complete, 1 left
New settings 0x00000601 received Unregistering new settings notification Test condition complete, 0 left
Set connectable off (LE) - Success 3 - test passed Set connectable off (LE) - Success 3 - teardown
New settings event received
Index Removed callback

    Index: 0x0000

Set connectable off (LE) - Success 3 - teardown complete Set connectable off (LE) - Success 3 - done

Set connectable off (LE) - Success 4 - init
Read Version callback

    Status: Success (0x00)
    Version 1.20
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001be1b
    Current settings: 0x00000200
    Class: 0x000000
    Name: 
    Short name: 

Set connectable off (LE) - Success 4 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set connectable off (LE) - Success 4 - setup complete Set connectable off (LE) - Success 4 - run
Registering new settings notification
Test condition added, total 1
Registering HCI command callback
Test condition added, total 2
Sending Set Connectable (0x0007)
Test condition added, total 3
HCI Command 0x2008 length 32
HCI Command 0x200a length 1
HCI Command 0x2005 length 6
HCI Command 0x2006 length 15
Test condition complete, 2 left
HCI Command 0x200a length 1
Set Connectable (0x0007): Success (0x00) Test condition complete, 1 left
New settings 0x00000601 received Unregistering new settings notification Test condition complete, 0 left
Set connectable off (LE) - Success 4 - test passed Set connectable off (LE) - Success 4 - teardown
New settings event received
Index Removed callback

    Index: 0x0000

Set connectable off (LE) - Success 4 - teardown complete Set connectable off (LE) - Success 4 - done

Set fast connectable on - Success 1 - init
Read Version callback

    Status: Success (0x00)
    Version 1.20
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set fast connectable on - Success 1 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set fast connectable on - Success 1 - setup complete Set fast connectable on - Success 1 - run
Registering new settings notification
Test condition added, total 1
Sending Set Fast Connectable (0x0008)
Test condition added, total 2
Set Fast Connectable (0x0008): Success (0x00) Test condition complete, 1 left
New settings 0x00000087 received Unregistering new settings notification Test condition complete, 0 left
Set fast connectable on - Success 1 - test passed Set fast connectable on - Success 1 - teardown
New settings event received
Index Removed callback

    Index: 0x0000

Set fast connectable on - Success 1 - teardown complete Set fast connectable on - Success 1 - done

Set fast connectable on - Success 2 - init
Read Version callback

    Status: Success (0x00)
    Version 1.20
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set fast connectable on - Success 2 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set fast connectable on - Success 2 - setup complete Set fast connectable on - Success 2 - run
Registering new settings notification
Test condition added, total 1
Sending Set Fast Connectable (0x0008)
Test condition added, total 2
Set Fast Connectable (0x0008): Success (0x00) Test condition complete, 1 left
New settings 0x00000085 received Unregistering new settings notification Test condition complete, 0 left
Set fast connectable on - Success 2 - test passed Set fast connectable on - Success 2 - teardown
New settings event received
Index Removed callback

    Index: 0x0000

Set fast connectable on - Success 2 - teardown complete Set fast connectable on - Success 2 - done

Set fast connectable on - Success 3 - init
Read Version callback

    Status: Success (0x00)
    Version 1.20
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set fast connectable on - Success 3 - setup Set fast connectable on - Success 3 - setup complete Set fast connectable on - Success 3 - run
Registering new settings notification
Test condition added, total 1
Sending Set Fast Connectable (0x0008)
Test condition added, total 2
Set Fast Connectable (0x0008): Success (0x00) Test condition complete, 1 left
New settings 0x00000084 received Unregistering new settings notification Test condition complete, 0 left
Set fast connectable on - Success 3 - test passed Set fast connectable on - Success 3 - teardown
Index Removed callback

    Index: 0x0000

Set fast connectable on - Success 3 - teardown complete Set fast connectable on - Success 3 - done

Set fast connectable on - Invalid Params 1 - init
Read Version callback

    Status: Success (0x00)
    Version 1.20
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set fast connectable on - Invalid Params 1 - setup Set fast connectable on - Invalid Params 1 - setup complete Set fast connectable on - Invalid Params 1 - run
Sending Set Fast Connectable (0x0008)
Test condition added, total 1
Set Fast Connectable (0x0008): Invalid Parameters (0x0d) Test condition complete, 0 left
Set fast connectable on - Invalid Params 1 - test passed Set fast connectable on - Invalid Params 1 - teardown
Index Removed callback

    Index: 0x0000

Set fast connectable on - Invalid Params 1 - teardown complete Set fast connectable on - Invalid Params 1 - done

Set fast connectable on - Not Supported 1 - init
Read Version callback

    Status: Success (0x00)
    Version 1.20
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001be1b
    Current settings: 0x00000200
    Class: 0x000000
    Name: 
    Short name: 

Set fast connectable on - Not Supported 1 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set fast connectable on - Not Supported 1 - setup complete Set fast connectable on - Not Supported 1 - run
Sending Set Fast Connectable (0x0008)
Test condition added, total 1
Set Fast Connectable (0x0008): Not Supported (0x0c) Test condition complete, 0 left
Set fast connectable on - Not Supported 1 - test passed Set fast connectable on - Not Supported 1 - teardown
Index Removed callback

    Index: 0x0000

Set fast connectable on - Not Supported 1 - teardown complete Set fast connectable on - Not Supported 1 - done

Set bondable on - Success - init
Read Version callback

    Status: Success (0x00)
    Version 1.20
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set bondable on - Success - setup
Set bondable on - Success - setup complete
Set bondable on - Success - run
Registering new settings notification
Test condition added, total 1
Sending Set Bondable (0x0009)
Test condition added, total 2
Set Bondable (0x0009): Success (0x00)
Test condition complete, 1 left
New settings 0x00000090 received
Unregistering new settings notification
Test condition complete, 0 left
Set bondable on - Success - test passed
Set bondable on - Success - teardown
Index Removed callback

    Index: 0x0000

Set bondable on - Success - teardown complete
Set bondable on - Success - done

Set bondable on - Invalid parameters 1 - init
Read Version callback

    Status: Success (0x00)
    Version 1.20
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set bondable on - Invalid parameters 1 - setup Set bondable on - Invalid parameters 1 - setup complete Set bondable on - Invalid parameters 1 - run
Sending Set Bondable (0x0009)
Test condition added, total 1
Set Bondable (0x0009): Invalid Parameters (0x0d) Test condition complete, 0 left
Set bondable on - Invalid parameters 1 - test passed Set bondable on - Invalid parameters 1 - teardown
Index Removed callback

    Index: 0x0000

Set bondable on - Invalid parameters 1 - teardown complete Set bondable on - Invalid parameters 1 - done

Set bondable on - Invalid parameters 2 - init
Read Version callback

    Status: Success (0x00)
    Version 1.20
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set bondable on - Invalid parameters 2 - setup Set bondable on - Invalid parameters 2 - setup complete Set bondable on - Invalid parameters 2 - run
Sending Set Bondable (0x0009)
Test condition added, total 1
Set Bondable (0x0009): Invalid Parameters (0x0d) Test condition complete, 0 left
Set bondable on - Invalid parameters 2 - test passed Set bondable on - Invalid parameters 2 - teardown
Index Removed callback

    Index: 0x0000

Set bondable on - Invalid parameters 2 - teardown complete Set bondable on - Invalid parameters 2 - done

Set bondable on - Invalid parameters 3 - init
Read Version callback

    Status: Success (0x00)
    Version 1.20
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set bondable on - Invalid parameters 3 - setup Set bondable on - Invalid parameters 3 - setup complete Set bondable on - Invalid parameters 3 - run
Sending Set Bondable (0x0009)
Test condition added, total 1
Set Bondable (0x0009): Invalid Parameters (0x0d) Test condition complete, 0 left
Set bondable on - Invalid parameters 3 - test passed Set bondable on - Invalid parameters 3 - teardown
Index Removed callback

    Index: 0x0000

Set bondable on - Invalid parameters 3 - teardown complete Set bondable on - Invalid parameters 3 - done

Set bondable on - Invalid index - init
Read Version callback

    Status: Success (0x00)
    Version 1.20
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set bondable on - Invalid index - setup
Set bondable on - Invalid index - setup complete
Set bondable on - Invalid index - run
Sending Set Bondable (0x0009)
Test condition added, total 1
Set Bondable (0x0009): Invalid Index (0x11)
Test condition complete, 0 left
Set bondable on - Invalid index - test passed
Set bondable on - Invalid index - teardown
Index Removed callback

    Index: 0x0000

Set bondable on - Invalid index - teardown complete Set bondable on - Invalid index - done

Set discoverable on - Invalid parameters 1 - init
Read Version callback

    Status: Success (0x00)
    Version 1.20
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set discoverable on - Invalid parameters 1 - setup Set discoverable on - Invalid parameters 1 - setup complete Set discoverable on - Invalid parameters 1 - run
Sending Set Discoverable (0x0006)
Test condition added, total 1
Set Discoverable (0x0006): Invalid Parameters (0x0d) Test condition complete, 0 left
Set discoverable on - Invalid parameters 1 - test passed Set discoverable on - Invalid parameters 1 - teardown
Index Removed callback

    Index: 0x0000

Set discoverable on - Invalid parameters 1 - teardown complete Set discoverable on - Invalid parameters 1 - done

Set discoverable on - Invalid parameters 2 - init
Read Version callback

    Status: Success (0x00)
    Version 1.20
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set discoverable on - Invalid parameters 2 - setup Set discoverable on - Invalid parameters 2 - setup complete Set discoverable on - Invalid parameters 2 - run
Sending Set Discoverable (0x0006)
Test condition added, total 1
Set Discoverable (0x0006): Invalid Parameters (0x0d) Test condition complete, 0 left
Set discoverable on - Invalid parameters 2 - test passed Set discoverable on - Invalid parameters 2 - teardown
Index Removed callback

    Index: 0x0000

Set discoverable on - Invalid parameters 2 - teardown complete Set discoverable on - Invalid parameters 2 - done

Set discoverable on - Invalid parameters 3 - init
Read Version callback

    Status: Success (0x00)
    Version 1.20
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set discoverable on - Invalid parameters 3 - setup Set discoverable on - Invalid parameters 3 - setup complete Set discoverable on - Invalid parameters 3 - run
Sending Set Discoverable (0x0006)
Test condition added, total 1
Set Discoverable (0x0006): Invalid Parameters (0x0d) Test condition complete, 0 left
Set discoverable on - Invalid parameters 3 - test passed Set discoverable on - Invalid parameters 3 - teardown
Index Removed callback

    Index: 0x0000

Set discoverable on - Invalid parameters 3 - teardown complete Set discoverable on - Invalid parameters 3 - done

Set discoverable on - Invalid parameters 4 - init
Read Version callback

    Status: Success (0x00)
    Version 1.20
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set discoverable on - Invalid parameters 4 - setup Set discoverable on - Invalid parameters 4 - setup complete Set discoverable on - Invalid parameters 4 - run
Sending Set Discoverable (0x0006)
Test condition added, total 1
Set Discoverable (0x0006): Invalid Parameters (0x0d) Test condition complete, 0 left
Set discoverable on - Invalid parameters 4 - test passed Set discoverable on - Invalid parameters 4 - teardown
Index Removed callback

    Index: 0x0000

Set discoverable on - Invalid parameters 4 - teardown complete Set discoverable on - Invalid parameters 4 - done

Set discoverable on - Not powered 1 - init
Read Version callback

    Status: Success (0x00)
    Version 1.20
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set discoverable on - Not powered 1 - setup Set discoverable on - Not powered 1 - setup complete Set discoverable on - Not powered 1 - run
Sending Set Discoverable (0x0006)
Test condition added, total 1
Set Discoverable (0x0006): Not Powered (0x0f) Test condition complete, 0 left
Set discoverable on - Not powered 1 - test passed Set discoverable on - Not powered 1 - teardown
Index Removed callback

    Index: 0x0000

Set discoverable on - Not powered 1 - teardown complete Set discoverable on - Not powered 1 - done

Set discoverable on - Not powered 2 - init
Read Version callback

    Status: Success (0x00)
    Version 1.20
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set discoverable on - Not powered 2 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set discoverable on - Not powered 2 - setup complete Set discoverable on - Not powered 2 - run
Sending Set Discoverable (0x0006)
Test condition added, total 1
Set Discoverable (0x0006): Not Powered (0x0f) Test condition complete, 0 left
Set discoverable on - Not powered 2 - test passed Set discoverable on - Not powered 2 - teardown
Index Removed callback

    Index: 0x0000

Set discoverable on - Not powered 2 - teardown complete Set discoverable on - Not powered 2 - done

Set discoverable on - Rejected 1 - init
Read Version callback

    Status: Success (0x00)
    Version 1.20
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set discoverable on - Rejected 1 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set discoverable on - Rejected 1 - setup complete
Set discoverable on - Rejected 1 - run
Sending Set Discoverable (0x0006)
Test condition added, total 1
Set Discoverable (0x0006): Rejected (0x0b)
Test condition complete, 0 left
Set discoverable on - Rejected 1 - test passed
Set discoverable on - Rejected 1 - teardown
Index Removed callback

    Index: 0x0000

Set discoverable on - Rejected 1 - teardown complete Set discoverable on - Rejected 1 - done

Set discoverable on - Rejected 2 - init
Read Version callback

    Status: Success (0x00)
    Version 1.20
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set discoverable on - Rejected 2 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set discoverable on - Rejected 2 - setup complete
Set discoverable on - Rejected 2 - run
Sending Set Discoverable (0x0006)
Test condition added, total 1
Set Discoverable (0x0006): Rejected (0x0b)
Test condition complete, 0 left
Set discoverable on - Rejected 2 - test passed
Set discoverable on - Rejected 2 - teardown
Index Removed callback

    Index: 0x0000

Set discoverable on - Rejected 2 - teardown complete Set discoverable on - Rejected 2 - done

Set discoverable on - Rejected 3 - init
Read Version callback

    Status: Success (0x00)
    Version 1.20
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set discoverable on - Rejected 3 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set discoverable on - Rejected 3 - setup complete
Set discoverable on - Rejected 3 - run
Sending Set Discoverable (0x0006)
Test condition added, total 1
Set Discoverable (0x0006): Rejected (0x0b)
Test condition complete, 0 left
Set discoverable on - Rejected 3 - test passed
Set discoverable on - Rejected 3 - teardown
Index Removed callback

    Index: 0x0000

Set discoverable on - Rejected 3 - teardown complete Set discoverable on - Rejected 3 - done

Set discoverable on - Success 1 - init
Read Version callback

    Status: Success (0x00)
    Version 1.20
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set discoverable on - Success 1 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set discoverable on - Success 1 - setup complete
Set discoverable on - Success 1 - run
Registering new settings notification
Test condition added, total 1
Sending Set Discoverable (0x0006)
Test condition added, total 2
Set Discoverable (0x0006): Success (0x00)
Test condition complete, 1 left
New settings 0x0000008a received
Unregistering new settings notification
Test condition complete, 0 left
Set discoverable on - Success 1 - test passed
Set discoverable on - Success 1 - teardown
Index Removed callback

    Index: 0x0000

Set discoverable on - Success 1 - teardown complete Set discoverable on - Success 1 - done

Set discoverable on - Success 2 - init
Read Version callback

    Status: Success (0x00)
    Version 1.20
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set discoverable on - Success 2 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set discoverable on - Success 2 - setup complete
Set discoverable on - Success 2 - run
Registering new settings notification
Test condition added, total 1
Registering HCI command callback
Test condition added, total 2
Sending Set Discoverable (0x0006)
Test condition added, total 3
HCI Command 0x0c3a length 4
HCI Command 0x0c1a length 1
Test condition complete, 2 left
Set Discoverable (0x0006): Success (0x00)
Test condition complete, 1 left
New settings 0x0000008b received
Unregistering new settings notification
Test condition complete, 0 left
Set discoverable on - Success 2 - test passed
Set discoverable on - Success 2 - teardown
New settings event received
Index Removed callback

    Index: 0x0000

Set discoverable on - Success 2 - teardown complete Set discoverable on - Success 2 - done

Set discoverable on (LE) - Success 1 - init
Read Version callback

    Status: Success (0x00)
    Version 1.20
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001be1b
    Current settings: 0x00000200
    Class: 0x000000
    Name: 
    Short name: 

Set discoverable on (LE) - Success 1 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set discoverable on (LE) - Success 1 - setup complete Set discoverable on (LE) - Success 1 - run
Registering HCI command callback
Test condition added, total 1
Sending Set Discoverable (0x0006)
Test condition added, total 2
HCI Command 0x2008 length 32
Test condition complete, 1 left
Set Discoverable (0x0006): Success (0x00) Test condition complete, 0 left
Set discoverable on (LE) - Success 1 - test passed Set discoverable on (LE) - Success 1 - teardown
Index Removed callback

    Index: 0x0000

Set discoverable on (LE) - Success 1 - teardown complete Set discoverable on (LE) - Success 1 - done

Set discoverable off - Success 1 - init
Read Version callback

    Status: Success (0x00)
    Version 1.20
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set discoverable off - Success 1 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set discoverable off - Success 1 - setup complete
Set discoverable off - Success 1 - run
Sending Set Discoverable (0x0006)
Test condition added, total 1
Set Discoverable (0x0006): Success (0x00)
Test condition complete, 0 left
Set discoverable off - Success 1 - test passed
Set discoverable off - Success 1 - teardown
Index Removed callback

    Index: 0x0000

Set discoverable off - Success 1 - teardown complete Set discoverable off - Success 1 - done

Set discoverable off - Success 2 - init
Read Version callback

    Status: Success (0x00)
    Version 1.20
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set discoverable off - Success 2 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set discoverable off - Success 2 - setup complete
Set discoverable off - Success 2 - run
Registering HCI command callback
Test condition added, total 1
Sending Set Discoverable (0x0006)
Test condition added, total 2
HCI Command 0x0c1a length 1
Test condition complete, 1 left
Set Discoverable (0x0006): Success (0x00)
Test condition complete, 0 left
Set discoverable off - Success 2 - test passed
Set discoverable off - Success 2 - teardown
Index Removed callback

    Index: 0x0000

Set discoverable off - Success 2 - teardown complete Set discoverable off - Success 2 - done

Set limited discoverable on - Success 1 - init
Read Version callback

    Status: Success (0x00)
    Version 1.20
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set limited discoverable on - Success 1 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set limited discoverable on - Success 1 - setup complete Set limited discoverable on - Success 1 - run
Registering HCI command callback
Test condition added, total 1
Sending Set Discoverable (0x0006)
Test condition added, total 2
HCI Command 0x0c3a length 4
HCI Command 0x0c1a length 1
Test condition complete, 1 left
HCI Command 0x0c24 length 3
Set Discoverable (0x0006): Success (0x00) Test condition complete, 0 left
Set limited discoverable on - Success 1 - test passed Set limited discoverable on - Success 1 - teardown
Index Removed callback

    Index: 0x0000

Set limited discoverable on - Success 1 - teardown complete Set limited discoverable on - Success 1 - done

Set limited discoverable on - Success 2 - init
Read Version callback

    Status: Success (0x00)
    Version 1.20
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set limited discoverable on - Success 2 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set limited discoverable on - Success 2 - setup complete Set limited discoverable on - Success 2 - run
Registering HCI command callback
Test condition added, total 1
Sending Set Discoverable (0x0006)
Test condition added, total 2
HCI Command 0x0c3a length 4
Test condition complete, 1 left
HCI Command 0x0c1a length 1
HCI Command 0x0c24 length 3
Set Discoverable (0x0006): Success (0x00) Test condition complete, 0 left
Set limited discoverable on - Success 2 - test passed Set limited discoverable on - Success 2 - teardown
Index Removed callback

    Index: 0x0000

Set limited discoverable on - Success 2 - teardown complete Set limited discoverable on - Success 2 - done

Set limited discoverable on - Success 3 - init
Read Version callback

    Status: Success (0x00)
    Version 1.20
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set limited discoverable on - Success 3 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set limited discoverable on - Success 3 - setup complete Set limited discoverable on - Success 3 - run
Registering HCI command callback
Test condition added, total 1
Sending Set Discoverable (0x0006)
Test condition added, total 2
HCI Command 0x0c3a length 4
HCI Command 0x0c1a length 1
HCI Command 0x0c24 length 3
Test condition complete, 1 left
Set Discoverable (0x0006): Success (0x00) Test condition complete, 0 left
Set limited discoverable on - Success 3 - test passed Set limited discoverable on - Success 3 - teardown
Index Removed callback

    Index: 0x0000

Set limited discoverable on - Success 3 - teardown complete Set limited discoverable on - Success 3 - done

Set limited discoverable on (LE) - Success 1 - init
Read Version callback

    Status: Success (0x00)
    Version 1.20
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001be1b
    Current settings: 0x00000200
    Class: 0x000000
    Name: 
    Short name: 

Set limited discoverable on (LE) - Success 1 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set limited discoverable on (LE) - Success 1 - setup complete Set limited discoverable on (LE) - Success 1 - run
Registering HCI command callback
Test condition added, total 1
Sending Set Discoverable (0x0006)
Test condition added, total 2
HCI Command 0x2008 length 32
Test condition complete, 1 left
Set Discoverable (0x0006): Success (0x00)
Test condition complete, 0 left
Set limited discoverable on (LE) - Success 1 - test passed Set limited discoverable on (LE) - Success 1 - teardown
Index Removed callback

    Index: 0x0000

Set limited discoverable on (LE) - Success 1 - teardown complete Set limited discoverable on (LE) - Success 1 - done

Set link security on - Success 1 - init
Read Version callback

    Status: Success (0x00)
    Version 1.20
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set link security on - Success 1 - setup
Set link security on - Success 1 - setup complete
Set link security on - Success 1 - run
Registering new settings notification
Test condition added, total 1
Sending Set Link Security (0x000a)
Test condition added, total 2
Set Link Security (0x000a): Success (0x00)
Test condition complete, 1 left
New settings 0x000000a0 received
Unregistering new settings notification
Test condition complete, 0 left
Set link security on - Success 1 - test passed
Set link security on - Success 1 - teardown
Index Removed callback

    Index: 0x0000

Set link security on - Success 1 - teardown complete Set link security on - Success 1 - done

Set link security on - Success 2 - init
Read Version callback

    Status: Success (0x00)
    Version 1.20
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set link security on - Success 2 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set link security on - Success 2 - setup complete
Set link security on - Success 2 - run
Registering new settings notification
Test condition added, total 1
Registering HCI command callback
Test condition added, total 2
Sending Set Link Security (0x000a)
Test condition added, total 3
HCI Command 0x0c20 length 1
Test condition complete, 2 left
Set Link Security (0x000a): Success (0x00)
Test condition complete, 1 left
New settings 0x000000a1 received
Unregistering new settings notification
Test condition complete, 0 left
Set link security on - Success 2 - test passed
Set link security on - Success 2 - teardown
New settings event received
Index Removed callback

    Index: 0x0000

Set link security on - Success 2 - teardown complete Set link security on - Success 2 - done

Set link security on - Success 3 - init
Read Version callback

    Status: Success (0x00)
    Version 1.20
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set link security on - Success 3 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set link security on - Success 3 - setup complete
Set link security on - Success 3 - run
Registering new settings notification
Test condition added, total 1
Registering HCI command callback
Test condition added, total 2
Sending Set Powered (0x0005)
Test condition added, total 3
HCI Command 0x0c20 length 1
Test condition complete, 2 left
HCI Command 0x0c13 length 248
Set Powered (0x0005): Success (0x00)
Test condition complete, 1 left
New settings 0x000000a1 received
Unregistering new settings notification
Test condition complete, 0 left
Set link security on - Success 3 - test passed
Set link security on - Success 3 - teardown
New settings event received
Index Removed callback

    Index: 0x0000

Set link security on - Success 3 - teardown complete Set link security on - Success 3 - done

Set link security on - Invalid parameters 1 - init
Read Version callback

    Status: Success (0x00)
    Version 1.20
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set link security on - Invalid parameters 1 - setup Set link security on - Invalid parameters 1 - setup complete Set link security on - Invalid parameters 1 - run
Sending Set Link Security (0x000a)
Test condition added, total 1
Set Link Security (0x000a): Invalid Parameters (0x0d) Test condition complete, 0 left
Set link security on - Invalid parameters 1 - test passed Set link security on - Invalid parameters 1 - teardown
Index Removed callback

    Index: 0x0000

Set link security on - Invalid parameters 1 - teardown complete Set link security on - Invalid parameters 1 - done

Set link security on - Invalid parameters 2 - init
Read Version callback

    Status: Success (0x00)
    Version 1.20
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set link security on - Invalid parameters 2 - setup Set link security on - Invalid parameters 2 - setup complete Set link security on - Invalid parameters 2 - run
Sending Set Link Security (0x000a)
Test condition added, total 1
Set Link Security (0x000a): Invalid Parameters (0x0d) Test condition complete, 0 left
Set link security on - Invalid parameters 2 - test passed Set link security on - Invalid parameters 2 - teardown
Index Removed callback

    Index: 0x0000

Set link security on - Invalid parameters 2 - teardown complete Set link security on - Invalid parameters 2 - done

Set link security on - Invalid parameters 3 - init
Read Version callback

    Status: Success (0x00)
    Version 1.20
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set link security on - Invalid parameters 3 - setup Set link security on - Invalid parameters 3 - setup complete Set link security on - Invalid parameters 3 - run
Sending Set Link Security (0x000a)
Test condition added, total 1
Set Link Security (0x000a): Invalid Parameters (0x0d) Test condition complete, 0 left
Set link security on - Invalid parameters 3 - test passed Set link security on - Invalid parameters 3 - teardown
Index Removed callback

    Index: 0x0000

Set link security on - Invalid parameters 3 - teardown complete Set link security on - Invalid parameters 3 - done

Set link security on - Invalid index - init
Read Version callback

    Status: Success (0x00)
    Version 1.20
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set link security on - Invalid index - setup Set link security on - Invalid index - setup complete Set link security on - Invalid index - run
Sending Set Link Security (0x000a)
Test condition added, total 1
Set Link Security (0x000a): Invalid Index (0x11) Test condition complete, 0 left
Set link security on - Invalid index - test passed Set link security on - Invalid index - teardown
Index Removed callback

    Index: 0x0000

Set link security on - Invalid index - teardown complete Set link security on - Invalid index - done

Set link security off - Success 1 - init
Read Version callback

    Status: Success (0x00)
    Version 1.20
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set link security off - Success 1 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set link security off - Success 1 - setup complete Set link security off - Success 1 - run
Registering new settings notification Test condition added, total 1
Sending Set Link Security (0x000a)
Test condition added, total 2
Set Link Security (0x000a): Success (0x00) Test condition complete, 1 left
New settings 0x00000080 received Unregistering new settings notification Test condition complete, 0 left
Set link security off - Success 1 - test passed Set link security off - Success 1 - teardown
Index Removed callback

    Index: 0x0000

Set link security off - Success 1 - teardown complete Set link security off - Success 1 - done

Set link security off - Success 2 - init
Read Version callback

    Status: Success (0x00)
    Version 1.20
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set link security off - Success 2 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set link security off - Success 2 - setup complete Set link security off - Success 2 - run
Registering new settings notification Test condition added, total 1 Registering HCI command callback
Test condition added, total 2
Sending Set Link Security (0x000a)
Test condition added, total 3
HCI Command 0x0c20 length 1
Test condition complete, 2 left
Set Link Security (0x000a): Success (0x00) Test condition complete, 1 left
New settings 0x00000081 received Unregistering new settings notification Test condition complete, 0 left
Set link security off - Success 2 - test passed Set link security off - Success 2 - teardown
New settings event received
Index Removed callback

    Index: 0x0000

Set link security off - Success 2 - teardown complete Set link security off - Success 2 - done

Set SSP on - Success 1 - init
Read Version callback

    Status: Success (0x00)
    Version 1.20
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set SSP on - Success 1 - setup
Set SSP on - Success 1 - setup complete
Set SSP on - Success 1 - run
Registering new settings notification
Test condition added, total 1
Sending Set Secure Simple Pairing (0x000b) Test condition added, total 2
Set Secure Simple Pairing (0x000b): Success (0x00) Test condition complete, 1 left
New settings 0x000000c0 received Unregistering new settings notification Test condition complete, 0 left
Set SSP on - Success 1 - test passed
Set SSP on - Success 1 - teardown
Index Removed callback

    Index: 0x0000

Set SSP on - Success 1 - teardown complete
Set SSP on - Success 1 - done

Set SSP on - Success 2 - init
Read Version callback

    Status: Success (0x00)
    Version 1.20
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set SSP on - Success 2 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set SSP on - Success 2 - setup complete
Set SSP on - Success 2 - run
Registering new settings notification
Test condition added, total 1
Registering HCI command callback
Test condition added, total 2
Sending Set Secure Simple Pairing (0x000b) Test condition added, total 3
HCI Command 0x0c56 length 1
Test condition complete, 2 left
Set Secure Simple Pairing (0x000b): Success (0x00) Test condition complete, 1 left
New settings 0x000000c1 received Unregistering new settings notification Test condition complete, 0 left
Set SSP on - Success 2 - test passed
HCI Command 0x0c52 length 241
Set SSP on - Success 2 - teardown
New settings event received
Index Removed callback

    Index: 0x0000

Set SSP on - Success 2 - teardown complete
Set SSP on - Success 2 - done

Set SSP on - Success 3 - init
Read Version callback

    Status: Success (0x00)
    Version 1.20
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set SSP on - Success 3 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set SSP on - Success 3 - setup complete
Set SSP on - Success 3 - run
Registering new settings notification
Test condition added, total 1
Registering HCI command callback
Test condition added, total 2
Sending Set Powered (0x0005)
Test condition added, total 3
HCI Command 0x0c56 length 1
Test condition complete, 2 left
HCI Command 0x0c13 length 248
HCI Command 0x0c52 length 241
Set Powered (0x0005): Success (0x00)
Test condition complete, 1 left
New settings 0x000000c1 received
Unregistering new settings notification
Test condition complete, 0 left
Set SSP on - Success 3 - test passed
Set SSP on - Success 3 - teardown
New settings event received
Index Removed callback

    Index: 0x0000

Set SSP on - Success 3 - teardown complete
Set SSP on - Success 3 - done

Set SSP on - Invalid parameters 1 - init
Read Version callback

    Status: Success (0x00)
    Version 1.20
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set SSP on - Invalid parameters 1 - setup
Set SSP on - Invalid parameters 1 - setup complete Set SSP on - Invalid parameters 1 - run
Sending Set Secure Simple Pairing (0x000b)
Test condition added, total 1
Set Secure Simple Pairing (0x000b): Invalid Parameters (0x0d) Test condition complete, 0 left
Set SSP on - Invalid parameters 1 - test passed
Set SSP on - Invalid parameters 1 - teardown
Index Removed callback

    Index: 0x0000

Set SSP on - Invalid parameters 1 - teardown complete Set SSP on - Invalid parameters 1 - done

Set SSP on - Invalid parameters 2 - init
Read Version callback

    Status: Success (0x00)
    Version 1.20
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set SSP on - Invalid parameters 2 - setup
Set SSP on - Invalid parameters 2 - setup complete Set SSP on - Invalid parameters 2 - run
Sending Set Secure Simple Pairing (0x000b)
Test condition added, total 1
Set Secure Simple Pairing (0x000b): Invalid Parameters (0x0d) Test condition complete, 0 left
Set SSP on - Invalid parameters 2 - test passed
Set SSP on - Invalid parameters 2 - teardown
Index Removed callback

    Index: 0x0000

Set SSP on - Invalid parameters 2 - teardown complete Set SSP on - Invalid parameters 2 - done

Set SSP on - Invalid parameters 3 - init
Read Version callback

    Status: Success (0x00)
    Version 1.20
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set SSP on - Invalid parameters 3 - setup
Set SSP on - Invalid parameters 3 - setup complete Set SSP on - Invalid parameters 3 - run
Sending Set Secure Simple Pairing (0x000b)
Test condition added, total 1
Set Secure Simple Pairing (0x000b): Invalid Parameters (0x0d) Test condition complete, 0 left
Set SSP on - Invalid parameters 3 - test passed
Set SSP on - Invalid parameters 3 - teardown
Index Removed callback

    Index: 0x0000

Set SSP on - Invalid parameters 3 - teardown complete Set SSP on - Invalid parameters 3 - done

Set SSP on - Invalid index - init
Read Version callback

    Status: Success (0x00)
    Version 1.20
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set SSP on - Invalid index - setup
Set SSP on - Invalid index - setup complete
Set SSP on - Invalid index - run
Sending Set Secure Simple Pairing (0x000b)
Test condition added, total 1
Set Secure Simple Pairing (0x000b): Invalid Index (0x11) Test condition complete, 0 left
Set SSP on - Invalid index - test passed
Set SSP on - Invalid index - teardown
Index Removed callback

    Index: 0x0000

Set SSP on - Invalid index - teardown complete
Set SSP on - Invalid index - done

Set Secure Connections on - Success 1 - init
Read Version callback

    Status: Success (0x00)
    Version 1.20
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set Secure Connections on - Success 1 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set Secure Connections on - Success 1 - setup complete Set Secure Connections on - Success 1 - run
Registering new settings notification
Test condition added, total 1
Sending Set Secure Connections (0x002d) Test condition added, total 2
Set Secure Connections (0x002d): Success (0x00) Test condition complete, 1 left
New settings 0x000008c0 received Unregistering new settings notification Test condition complete, 0 left
Set Secure Connections on - Success 1 - test passed Set Secure Connections on - Success 1 - teardown
Index Removed callback

    Index: 0x0000

Set Secure Connections on - Success 1 - teardown complete Set Secure Connections on - Success 1 - done

Set Secure Connections on - Success 2 - init
Read Version callback

    Status: Success (0x00)
    Version 1.20
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set Secure Connections on - Success 2 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set Secure Connections on - Success 2 - setup complete Set Secure Connections on - Success 2 - run
Registering new settings notification
Test condition added, total 1
Registering HCI command callback
Test condition added, total 2
Sending Set Secure Connections (0x002d) Test condition added, total 3
HCI Command 0x0c7a length 1
Test condition complete, 2 left
Set Secure Connections (0x002d): Success (0x00) Test condition complete, 1 left
New settings 0x000008c1 received Unregistering new settings notification Test condition complete, 0 left
Set Secure Connections on - Success 2 - test passed Set Secure Connections on - Success 2 - teardown
New settings event received
Index Removed callback

    Index: 0x0000

Set Secure Connections on - Success 2 - teardown complete Set Secure Connections on - Success 2 - done

Set Secure Connections on - Invalid params 1 - init
Read Version callback

    Status: Success (0x00)
    Version 1.20
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set Secure Connections on - Invalid params 1 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set Secure Connections on - Invalid params 1 - setup complete Set Secure Connections on - Invalid params 1 - run
Sending Set Secure Connections (0x002d)
Test condition added, total 1
Set Secure Connections (0x002d): Invalid Parameters (0x0d) Test condition complete, 0 left
Set Secure Connections on - Invalid params 1 - test passed Set Secure Connections on - Invalid params 1 - teardown
Index Removed callback

    Index: 0x0000

Set Secure Connections on - Invalid params 1 - teardown complete Set Secure Connections on - Invalid params 1 - done

Set Secure Connections on - Invalid params 2 - init
Read Version callback

    Status: Success (0x00)
    Version 1.20
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set Secure Connections on - Invalid params 2 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set Secure Connections on - Invalid params 2 - setup complete Set Secure Connections on - Invalid params 2 - run
Sending Set Secure Connections (0x002d)
Test condition added, total 1
Set Secure Connections (0x002d): Invalid Parameters (0x0d) Test condition complete, 0 left
Set Secure Connections on - Invalid params 2 - test passed Set Secure Connections on - Invalid params 2 - teardown
Index Removed callback

    Index: 0x0000

Set Secure Connections on - Invalid params 2 - teardown complete Set Secure Connections on - Invalid params 2 - done

Set Secure Connections on - Invalid params 3 - init
Read Version callback

    Status: Success (0x00)
    Version 1.20
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set Secure Connections on - Invalid params 3 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set Secure Connections on - Invalid params 3 - setup complete Set Secure Connections on - Invalid params 3 - run
Sending Set Secure Connections (0x002d)
Test condition added, total 1
Set Secure Connections (0x002d): Invalid Parameters (0x0d) Test condition complete, 0 left
Set Secure Connections on - Invalid params 3 - test passed Set Secure Connections on - Invalid params 3 - teardown
Index Removed callback

    Index: 0x0000

Set Secure Connections on - Invalid params 3 - teardown complete Set Secure Connections on - Invalid params 3 - done

Set Secure Connections on - Invalid index - init
Read Version callback

    Status: Success (0x00)
    Version 1.20
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set Secure Connections on - Invalid index - setup
Initial settings completed
Client set connectable: Success (0x00)
Set Secure Connections on - Invalid index - setup complete Set Secure Connections on - Invalid index - run
Sending Set Secure Connections (0x002d)
Test condition added, total 1
Set Secure Connections (0x002d): Invalid Index (0x11) Test condition complete, 0 left
Set Secure Connections on - Invalid index - test passed Set Secure Connections on - Invalid index - teardown
Index Removed callback

    Index: 0x0000

Set Secure Connections on - Invalid index - teardown complete Set Secure Connections on - Invalid index - done

Set Secure Connections on - Not supported 1 - init
Read Version callback

    Status: Success (0x00)
    Version 1.20
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x05
    Manufacturer: 0x003f
    Supported settings: 0x000110ff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set Secure Connections on - Not supported 1 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set Secure Connections on - Not supported 1 - setup complete Set Secure Connections on - Not supported 1 - run
Sending Set Secure Connections (0x002d)
Test condition added, total 1
Set Secure Connections (0x002d): Not Supported (0x0c) Test condition complete, 0 left
Set Secure Connections on - Not supported 1 - test passed Set Secure Connections on - Not supported 1 - teardown
Index Removed callback

    Index: 0x0000

Set Secure Connections on - Not supported 1 - teardown complete Set Secure Connections on - Not supported 1 - done

Set Secure Connections on - Not supported 2 - init
Read Version callback

    Status: Success (0x00)
    Version 1.20
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x05
    Manufacturer: 0x003f
    Supported settings: 0x000110ff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set Secure Connections on - Not supported 2 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set Secure Connections on - Not supported 2 - setup complete Set Secure Connections on - Not supported 2 - run
Sending Set Secure Connections (0x002d)
Test condition added, total 1
Set Secure Connections (0x002d): Not Supported (0x0c) Test condition complete, 0 left
Set Secure Connections on - Not supported 2 - test passed Set Secure Connections on - Not supported 2 - teardown
Index Removed callback

    Index: 0x0000

Set Secure Connections on - Not supported 2 - teardown complete Set Secure Connections on - Not supported 2 - done

Set Secure Connections Only on - Success 1 - init
Read Version callback

    Status: Success (0x00)
    Version 1.20
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set Secure Connections Only on - Success 1 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set Secure Connections Only on - Success 1 - setup complete Set Secure Connections Only on - Success 1 - run
Registering new settings notification
Test condition added, total 1
Sending Set Secure Connections (0x002d)
Test condition added, total 2
Set Secure Connections (0x002d): Success (0x00) Test condition complete, 1 left
New settings 0x000008c0 received
Unregistering new settings notification
Test condition complete, 0 left
Set Secure Connections Only on - Success 1 - test passed Set Secure Connections Only on - Success 1 - teardown
Index Removed callback

    Index: 0x0000

Set Secure Connections Only on - Success 1 - teardown complete Set Secure Connections Only on - Success 1 - done

Set Secure Connections Only on - Success 2 - init
Read Version callback

    Status: Success (0x00)
    Version 1.20
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set Secure Connections Only on - Success 2 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set Secure Connections Only on - Success 2 - setup complete Set Secure Connections Only on - Success 2 - run
Registering new settings notification
Test condition added, total 1
Registering HCI command callback
Test condition added, total 2
Sending Set Secure Connections (0x002d)
Test condition added, total 3
HCI Command 0x0c7a length 1
Test condition complete, 2 left
Set Secure Connections (0x002d): Success (0x00) Test condition complete, 1 left
New settings 0x000008c1 received
Unregistering new settings notification
Test condition complete, 0 left
Set Secure Connections Only on - Success 2 - test passed Set Secure Connections Only on - Success 2 - teardown
New settings event received
Index Removed callback

    Index: 0x0000

Set Secure Connections Only on - Success 2 - teardown complete Set Secure Connections Only on - Success 2 - done

Set High Speed on - Success - init
Read Version callback

    Status: Success (0x00)
    Version 1.20
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Expected bit 8 not supported
Expected supported settings: 0x0001beff != 0x0001bfff
Set High Speed on - Success - pre setup failed
Index Removed callback

    Index: 0x0000

Set High Speed on - Success - done

Set High Speed on - Invalid parameters 1 - init
Read Version callback

    Status: Success (0x00)
    Version 1.20
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Expected bit 8 not supported
Expected supported settings: 0x0001beff != 0x0001bfff
Set High Speed on - Invalid parameters 1 - pre setup failed
Index Removed callback

    Index: 0x0000

Set High Speed on - Invalid parameters 1 - done

Set High Speed on - Invalid parameters 2 - init
Read Version callback

    Status: Success (0x00)
    Version 1.20
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Expected bit 8 not supported
Expected supported settings: 0x0001beff != 0x0001bfff
Set High Speed on - Invalid parameters 2 - pre setup failed
Index Removed callback

    Index: 0x0000

Set High Speed on - Invalid parameters 2 - done

Set High Speed on - Invalid parameters 3 - init
Read Version callback

    Status: Success (0x00)
    Version 1.20
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Expected bit 8 not supported
Expected supported settings: 0x0001beff != 0x0001bfff
Set High Speed on - Invalid parameters 3 - pre setup failed
Index Removed callback

    Index: 0x0000

Set High Speed on - Invalid parameters 3 - done

Set High Speed on - Invalid index - init
Read Version callback

    Status: Success (0x00)
    Version 1.20
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Expected bit 8 not supported
Expected supported settings: 0x0001beff != 0x0001bfff
Set High Speed on - Invalid index - pre setup failed
Index Removed callback

    Index: 0x0000

Set High Speed on - Invalid index - done

Set Low Energy on - Success 1 - init
Read Version callback

    Status: Success (0x00)
    Version 1.20
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set Low Energy on - Success 1 - setup
Set Low Energy on - Success 1 - setup complete
Set Low Energy on - Success 1 - run
Registering new settings notification
Test condition added, total 1
Sending Set Low Energy (0x000d)
Test condition added, total 2
Set Low Energy (0x000d): Success (0x00)
Test condition complete, 1 left
New settings 0x00000280 received
Unregistering new settings notification
Test condition complete, 0 left
Set Low Energy on - Success 1 - test passed
Set Low Energy on - Success 1 - teardown
Index Removed callback

    Index: 0x0000

Set Low Energy on - Success 1 - teardown complete
Set Low Energy on - Success 1 - done

Set Low Energy on - Success 2 - init
Read Version callback

    Status: Success (0x00)
    Version 1.20
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set Low Energy on - Success 2 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set Low Energy on - Success 2 - setup complete
Set Low Energy on - Success 2 - run
Registering new settings notification
Test condition added, total 1
Registering HCI command callback
Test condition added, total 2
Sending Set Low Energy (0x000d)
Test condition added, total 3
HCI Command 0x0c6d length 2
Test condition complete, 2 left
Set Low Energy (0x000d): Success (0x00)
Test condition complete, 1 left
New settings 0x00000281 received
Unregistering new settings notification
Test condition complete, 0 left
Set Low Energy on - Success 2 - test passed
HCI Command 0x2008 length 32
Set Low Energy on - Success 2 - teardown
New settings event received
Index Removed callback

    Index: 0x0000

Set Low Energy on - Success 2 - teardown complete
Set Low Energy on - Success 2 - done

Set Low Energy on - Success 3 - init
Read Version callback

    Status: Success (0x00)
    Version 1.20
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set Low Energy on - Success 3 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set Low Energy on - Success 3 - setup complete
Set Low Energy on - Success 3 - run
Registering new settings notification
Test condition added, total 1
Registering HCI command callback
Test condition added, total 2
Sending Set Powered (0x0005)
Test condition added, total 3
HCI Command 0x0c6d length 2
Test condition complete, 2 left
HCI Command 0x2008 length 32
HCI Command 0x0c13 length 248
Set Powered (0x0005): Success (0x00)
Test condition complete, 1 left
New settings 0x00000281 received
Unregistering new settings notification
Test condition complete, 0 left
Set Low Energy on - Success 3 - test passed
Set Low Energy on - Success 3 - teardown
New settings event received
Index Removed callback

    Index: 0x0000

Set Low Energy on - Success 3 - teardown complete
Set Low Energy on - Success 3 - done

Set Low Energy on - Invalid parameters 1 - init
Read Version callback

    Status: Success (0x00)
    Version 1.20
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set Low Energy on - Invalid parameters 1 - setup Set Low Energy on - Invalid parameters 1 - setup complete Set Low Energy on - Invalid parameters 1 - run
Sending Set Low Energy (0x000d)
Test condition added, total 1
Set Low Energy (0x000d): Invalid Parameters (0x0d) Test condition complete, 0 left
Set Low Energy on - Invalid parameters 1 - test passed Set Low Energy on - Invalid parameters 1 - teardown
Index Removed callback

    Index: 0x0000

Set Low Energy on - Invalid parameters 1 - teardown complete Set Low Energy on - Invalid parameters 1 - done

Set Low Energy on - Invalid parameters 2 - init
Read Version callback

    Status: Success (0x00)
    Version 1.20
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set Low Energy on - Invalid parameters 2 - setup Set Low Energy on - Invalid parameters 2 - setup complete Set Low Energy on - Invalid parameters 2 - run
Sending Set Low Energy (0x000d)
Test condition added, total 1
Set Low Energy (0x000d): Invalid Parameters (0x0d) Test condition complete, 0 left
Set Low Energy on - Invalid parameters 2 - test passed Set Low Energy on - Invalid parameters 2 - teardown
Index Removed callback

    Index: 0x0000

Set Low Energy on - Invalid parameters 2 - teardown complete Set Low Energy on - Invalid parameters 2 - done

Set Low Energy on - Invalid parameters 3 - init
Read Version callback

    Status: Success (0x00)
    Version 1.20
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set Low Energy on - Invalid parameters 3 - setup Set Low Energy on - Invalid parameters 3 - setup complete Set Low Energy on - Invalid parameters 3 - run
Sending Set Low Energy (0x000d)
Test condition added, total 1
Set Low Energy (0x000d): Invalid Parameters (0x0d) Test condition complete, 0 left
Set Low Energy on - Invalid parameters 3 - test passed Set Low Energy on - Invalid parameters 3 - teardown
Index Removed callback

    Index: 0x0000

Set Low Energy on - Invalid parameters 3 - teardown complete Set Low Energy on - Invalid parameters 3 - done

Set Low Energy on - Invalid index - init
Read Version callback

    Status: Success (0x00)
    Version 1.20
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set Low Energy on - Invalid index - setup Set Low Energy on - Invalid index - setup complete Set Low Energy on - Invalid index - run
Sending Set Low Energy (0x000d)
Test condition added, total 1
Set Low Energy (0x000d): Invalid Index (0x11) Test condition complete, 0 left
Set Low Energy on - Invalid index - test passed Set Low Energy on - Invalid index - teardown
Index Removed callback

    Index: 0x0000

Set Low Energy on - Invalid index - teardown complete Set Low Energy on - Invalid index - done

Set Advertising on - Success 1 - init
Read Version callback

    Status: Success (0x00)
    Version 1.20
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set Advertising on - Success 1 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set Advertising on - Success 1 - setup complete
Set Advertising on - Success 1 - run
Registering new settings notification
Test condition added, total 1
Sending Set Advertising (0x0029)
Test condition added, total 2
Set Advertising (0x0029): Success (0x00)
Test condition complete, 1 left
New settings 0x00000680 received
Unregistering new settings notification
Test condition complete, 0 left
Set Advertising on - Success 1 - test passed
Set Advertising on - Success 1 - teardown
Index Removed callback

    Index: 0x0000

Set Advertising on - Success 1 - teardown complete Set Advertising on - Success 1 - done

Set Advertising on - Success 2 - init
Read Version callback

    Status: Success (0x00)
    Version 1.20
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set Advertising on - Success 2 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set Advertising on - Success 2 - setup complete
Set Advertising on - Success 2 - run
Registering new settings notification
Test condition added, total 1
Registering HCI command callback
Test condition added, total 2
Sending Set Advertising (0x0029)
Test condition added, total 3
HCI Command 0x2005 length 6
HCI Command 0x2006 length 15
HCI Command 0x200a length 1
Test condition complete, 2 left
Set Advertising (0x0029): Success (0x00)
Test condition complete, 1 left
New settings 0x00000681 received
Unregistering new settings notification
Test condition complete, 0 left
Set Advertising on - Success 2 - test passed
Set Advertising on - Success 2 - teardown
New settings event received
Index Removed callback

    Index: 0x0000

Set Advertising on - Success 2 - teardown complete Set Advertising on - Success 2 - done

Set Advertising on - Rejected 1 - init
Read Version callback

    Status: Success (0x00)
    Version 1.20
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set Advertising on - Rejected 1 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set Advertising on - Rejected 1 - setup complete
Set Advertising on - Rejected 1 - run
Sending Set Advertising (0x0029)
Test condition added, total 1
Set Advertising (0x0029): Rejected (0x0b)
Test condition complete, 0 left
Set Advertising on - Rejected 1 - test passed
Set Advertising on - Rejected 1 - teardown
Index Removed callback

    Index: 0x0000

Set Advertising on - Rejected 1 - teardown complete Set Advertising on - Rejected 1 - done

Set Advertising on - Appearance 1 - init
Read Version callback

    Status: Success (0x00)
    Version 1.20
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set Advertising on - Appearance 1 - setup
Initial settings completed
Setup sending Set Appearance (0x0043) Test setup condition added, total 1
Test setup condition complete, 0 left
Set Advertising on - Appearance 1 - setup complete Set Advertising on - Appearance 1 - run
Registering HCI command callback
Test condition added, total 1
Sending Set Advertising (0x0029)
Test condition added, total 2
HCI Command 0x2009 length 32
Test condition complete, 1 left
HCI Command 0x2005 length 6
HCI Command 0x2006 length 15
HCI Command 0x200a length 1
Set Advertising (0x0029): Success (0x00) Test condition complete, 0 left
Set Advertising on - Appearance 1 - test passed Set Advertising on - Appearance 1 - teardown
Index Removed callback

    Index: 0x0000

Set Advertising on - Appearance 1 - teardown complete Set Advertising on - Appearance 1 - done

Set Advertising on - Local name 1 - init
Read Version callback

    Status: Success (0x00)
    Version 1.20
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set Advertising on - Local name 1 - setup
Initial settings completed
Setup sending Set Local Name (0x000f) Test setup condition added, total 1
Test setup condition complete, 0 left
Set Advertising on - Local name 1 - setup complete Set Advertising on - Local name 1 - run
Registering HCI command callback
Test condition added, total 1
Sending Set Advertising (0x0029)
Test condition added, total 2
HCI Command 0x2009 length 32
Test condition complete, 1 left
HCI Command 0x2005 length 6
HCI Command 0x2006 length 15
HCI Command 0x200a length 1
Set Advertising (0x0029): Success (0x00) Test condition complete, 0 left
Set Advertising on - Local name 1 - test passed Set Advertising on - Local name 1 - teardown
Index Removed callback

    Index: 0x0000

Set Advertising on - Local name 1 - teardown complete Set Advertising on - Local name 1 - done

Set Advertising on - Name + Appear 1 - init
Read Version callback

    Status: Success (0x00)
    Version 1.20
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set Advertising on - Name + Appear 1 - setup
Initial settings completed
Sending setup opcode array
Setup sending Set Appearance (0x0043)
Test setup condition added, total 1
Setup sending Set Local Name (0x000f)
Test setup condition added, total 2
Test setup condition complete, 1 left
Test setup condition complete, 0 left
Set Advertising on - Name + Appear 1 - setup complete Set Advertising on - Name + Appear 1 - run
Registering HCI command callback
Test condition added, total 1
Sending Set Advertising (0x0029)
Test condition added, total 2
HCI Command 0x2009 length 32
Test condition complete, 1 left
HCI Command 0x2005 length 6
HCI Command 0x2006 length 15
HCI Command 0x200a length 1
Set Advertising (0x0029): Success (0x00) Test condition complete, 0 left
Set Advertising on - Name + Appear 1 - test passed Set Advertising on - Name + Appear 1 - teardown
Index Removed callback

    Index: 0x0000

Set Advertising on - Name + Appear 1 - teardown complete Set Advertising on - Name + Appear 1 - done

Set BR/EDR off - Success 1 - init
Read Version callback

    Status: Success (0x00)
    Version 1.20
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set BR/EDR off - Success 1 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set BR/EDR off - Success 1 - setup complete
Set BR/EDR off - Success 1 - run
Registering new settings notification
Test condition added, total 1
Sending Set BR/EDR (0x002a)
Test condition added, total 2
Set BR/EDR (0x002a): Success (0x00)
Test condition complete, 1 left
New settings 0x00000200 received
Unregistering new settings notification
Test condition complete, 0 left
Set BR/EDR off - Success 1 - test passed
Set BR/EDR off - Success 1 - teardown
Index Removed callback

    Index: 0x0000

Set BR/EDR off - Success 1 - teardown complete
Set BR/EDR off - Success 1 - done

Set BR/EDR on - Success 1 - init
Read Version callback

    Status: Success (0x00)
    Version 1.20
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set BR/EDR on - Success 1 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set BR/EDR on - Success 1 - setup complete
Set BR/EDR on - Success 1 - run
Registering new settings notification
Test condition added, total 1
Sending Set BR/EDR (0x002a)
Test condition added, total 2
Set BR/EDR (0x002a): Success (0x00)
Test condition complete, 1 left
New settings 0x00000280 received
Unregistering new settings notification
Test condition complete, 0 left
Set BR/EDR on - Success 1 - test passed
Set BR/EDR on - Success 1 - teardown
Index Removed callback

    Index: 0x0000

Set BR/EDR on - Success 1 - teardown complete
Set BR/EDR on - Success 1 - done

Set BR/EDR on - Success 2 - init
Read Version callback

    Status: Success (0x00)
    Version 1.20
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

13,126 lines not shown · raw message

Part of this message is not shown here. View the raw message.

#2 lore raw
In reply to Marcel Holtmann
I love your patch! Perhaps something to improve:

Hi Marcel,

I love your patch! Perhaps something to improve:

[auto build test WARNING on bluetooth-next/master]
[also build test WARNING on linus/master v5.12-rc6 next-20210406] [If your patch is applied to the wrong git tree, kindly drop us a note. And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]

url:    https://github.com/0day-ci/linux/commits/Marcel-Holtmann/Bluetooth-Add-support-for-virtio-transport-driver/20210406-221514
base:   https://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next.git master
config: x86_64-randconfig-a011-20210406 (attached as .config)
compiler: clang version 13.0.0 (https://github.com/llvm/llvm-project a46f59a747a7273cc439efaf3b4f98d8b63d2f20)

reproduce (this is a W=1 build):
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross chmod +x ~/bin/make.cross
# install x86_64 cross compiling tool for clang build
# apt-get install binutils-x86-64-linux-gnu
# https://github.com/0day-ci/linux/commit/189912fb9343a7f898dbab721e7c4a70957e235b
git remote add linux-review https://github.com/0day-ci/linux
git fetch --no-tags linux-review Marcel-Holtmann/Bluetooth-Add-support-for-virtio-transport-driver/20210406-221514 git checkout 189912fb9343a7f898dbab721e7c4a70957e235b
# save the attached .config to linux build tree
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=clang make.cross ARCH=x86_64

If you fix the issue, kindly add following tag as appropriate

All warnings (new ones prefixed by >>):

In file included from <built-in>:1:

>> ./usr/include/linux/virtio_bt.h:1:1: warning: // comments are not allowed in this language [-Wcomment]

// SPDX-License-Identifier: BSD-3-Clause
^
1 warning generated.

---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all(a)lists.01.org

#3 lore raw
In reply to Marcel Holtmann
I love your patch! Yet something to improve:

Hi Marcel,

I love your patch! Yet something to improve:

[auto build test ERROR on bluetooth-next/master]
[also build test ERROR on linus/master v5.12-rc6 next-20210406] [cannot apply to bluetooth/master]
[If your patch is applied to the wrong git tree, kindly drop us a note. And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]

url:    https://github.com/0day-ci/linux/commits/Marcel-Holtmann/Bluetooth-Add-support-for-virtio-transport-driver/20210406-221514
base:   https://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next.git master
config: um-allmodconfig (attached as .config)
compiler: gcc-9 (Debian 9.3.0-22) 9.3.0

reproduce (this is a W=1 build):
# https://github.com/0day-ci/linux/commit/189912fb9343a7f898dbab721e7c4a70957e235b
git remote add linux-review https://github.com/0day-ci/linux
git fetch --no-tags linux-review Marcel-Holtmann/Bluetooth-Add-support-for-virtio-transport-driver/20210406-221514 git checkout 189912fb9343a7f898dbab721e7c4a70957e235b
# save the attached .config to linux build tree
make W=1 ARCH=um

If you fix the issue, kindly add following tag as appropriate

All errors (new ones prefixed by >>):

cc1: warning: arch/um/include/uapi: No such file or directory [-Wmissing-include-dirs] drivers/bluetooth/virtio_bt.c: In function 'virtbt_probe':

>> drivers/bluetooth/virtio_bt.c:343:3: error: implicit declaration of function 'hci_set_aosp_capable'; did you mean 'lmp_transp_capable'? [-Werror=implicit-function-declaration]
     343 |   hci_set_aosp_capable(hdev);
         |   ^~~~~~~~~~~~~~~~~~~~
         |   lmp_transp_capable

cc1: some warnings being treated as errors

vim +343 drivers/bluetooth/virtio_bt.c

240
241 static int virtbt_probe(struct virtio_device *vdev)
242 {
243 vq_callback_t *callbacks[VIRTBT_NUM_VQS] = {
244 [VIRTBT_VQ_TX] = virtbt_tx_done,
245 [VIRTBT_VQ_RX] = virtbt_rx_done,
246 };
247 const char *names[VIRTBT_NUM_VQS] = {
248 [VIRTBT_VQ_TX] = "tx",
249 [VIRTBT_VQ_RX] = "rx",
250 };
251 struct virtio_bluetooth *vbt;
252 struct hci_dev *hdev;
253 int err;
254 __u8 type;
255
256 if (!virtio_has_feature(vdev, VIRTIO_F_VERSION_1))
257 return -ENODEV;
258
259 type = virtio_cread8(vdev, offsetof(struct virtio_bt_config, type));
260
261 switch (type) {
262 case VIRTIO_BT_CONFIG_TYPE_PRIMARY:
263 case VIRTIO_BT_CONFIG_TYPE_AMP:
264 break;
265 default:
266 return -EINVAL;
267 }
268
269 vbt = kzalloc(sizeof(*vbt), GFP_KERNEL);
270 if (!vbt)
271 return -ENOMEM;
272
273 vdev->priv = vbt;
274 vbt->vdev = vdev;
275
276 INIT_WORK(&vbt->rx, virtbt_rx_work);
277
278 err = virtio_find_vqs(vdev, VIRTBT_NUM_VQS, vbt->vqs, callbacks,
279 names, NULL);
280 if (err)
281 return err;
282
283 hdev = hci_alloc_dev();
284 if (!hdev) {
285 err = -ENOMEM;
286 goto failed;
287 }
288
289 vbt->hdev = hdev;
290
291 hdev->bus = HCI_VIRTIO;
292 hdev->dev_type = type;
293 hci_set_drvdata(hdev, vbt);
294
295 hdev->open = virtbt_open;
296 hdev->close = virtbt_close;
297 hdev->flush = virtbt_flush;
298 hdev->send = virtbt_send_frame;
299
300 if (virtio_has_feature(vdev, VIRTIO_BT_F_VND_HCI)) {
301 __u16 vendor;
302
303 virtio_cread(vdev, struct virtio_bt_config, vendor, &vendor);
304
305 switch (vendor) {
306 case VIRTIO_BT_CONFIG_VENDOR_ZEPHYR:
307 hdev->manufacturer = 1521;
308 hdev->setup = virtbt_setup_zephyr;
309 hdev->shutdown = virtbt_shutdown_generic;
310 hdev->set_bdaddr = virtbt_set_bdaddr_zephyr;
311 break;
312
313 case VIRTIO_BT_CONFIG_VENDOR_INTEL:
314 hdev->manufacturer = 2;
315 hdev->setup = virtbt_setup_intel;
316 hdev->shutdown = virtbt_shutdown_generic;
317 hdev->set_bdaddr = virtbt_set_bdaddr_intel;
318 set_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER, &hdev->quirks);
319 set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks);
320 set_bit(HCI_QUIRK_WIDEBAND_SPEECH_SUPPORTED, &hdev->quirks);
321 break;
322
323 case VIRTIO_BT_CONFIG_VENDOR_REALTEK:
324 hdev->manufacturer = 93;
325 hdev->setup = virtbt_setup_realtek;
326 hdev->shutdown = virtbt_shutdown_generic;
327 set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks);
328 set_bit(HCI_QUIRK_WIDEBAND_SPEECH_SUPPORTED, &hdev->quirks);
329 break;
330 }
331 }
332
333 if (virtio_has_feature(vdev, VIRTIO_BT_F_MSFT_EXT)) {
334 __u16 msft_opcode;
335
336 virtio_cread(vdev, struct virtio_bt_config,
337 msft_opcode, &msft_opcode);
338
339 hci_set_msft_opcode(hdev, msft_opcode);
340 }
341
342 if (virtio_has_feature(vdev, VIRTIO_BT_F_AOSP_EXT))

 > 343			hci_set_aosp_capable(hdev);

344
345 if (hci_register_dev(hdev) < 0) {
346 hci_free_dev(hdev);
347 err = -EBUSY;
348 goto failed;
349 }
350
351 return 0;
352
353 failed:
354 vdev->config->del_vqs(vdev);
355 return err;
356 }
357

---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all(a)lists.01.org

#4 lore raw
In reply to Marcel Holtmann

Hi Marcel,

Quoted 25 lines · Marcel Holtmann
include/uapi/linux/virtio_bt.h new file +19 -0
new file mode 100644
index 000000000000..0cedceaacf88
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: BSD-3-Clause
+
+#ifndef _UAPI_LINUX_VIRTIO_BT_H
+#define _UAPI_LINUX_VIRTIO_BT_H
+
+#include <linux/virtio_types.h>
+
+/* Feature bits */
+#define VIRTIO_BT_F_VND_HCI	0	/* Indicates vendor command support */
+#define VIRTIO_BT_F_MSFT_EXT	1	/* Indicates MSFT vendor support */
+#define VIRTIO_BT_F_AOSP_EXT	2	/* Indicates AOSP vendor support */
+
+enum virtio_bt_config_type {
+	VIRTIO_BT_CONFIG_TYPE_PRIMARY	= 0,
+	VIRTIO_BT_CONFIG_TYPE_AMP	= 1,
+};
+
+enum virtio_bt_config_vendor {
+	VIRTIO_BT_CONFIG_VENDOR_NONE	= 0,

include/uapi/linux/virtio_bt.h line 29

Quoted 10 lines
include/uapi/linux/virtio_bt.h new file +10 -0
+	VIRTIO_BT_CONFIG_VENDOR_ZEPHYR	= 1,
+	VIRTIO_BT_CONFIG_VENDOR_INTEL	= 2,
+	VIRTIO_BT_CONFIG_VENDOR_REALTEK	= 3,
+};
+
+struct virtio_bt_config {
+	__u8  type;
+	__u16 vendor;
+	__u16 msft_opcode;
+} __attribute__((packed));

Config fields should be naturally aligned, because the virtio spec says (4.1.3.1 Driver Requirements: PCI Device Layout).

For device configuration access, the driver MUST use 8-bit wide accesses for 8-bit wide fields, 16-bit wide and aligned accesses for 16-bit wide fields and 32-bit wide and aligned accesses for 32-bit and 64-bit wide fields.

include/uapi/linux/virtio_ids.h line 56

Quoted 11 lines
include/uapi/linux/virtio_bt.h new file +2 -0
+
+#endif /* _UAPI_LINUX_VIRTIO_BT_H */
include/uapi/linux/virtio_ids.h +1 -0
index bc1c0621f5ed..b4f468e9441d 100644
@@ -53,6 +53,7 @@
 #define VIRTIO_ID_MEM			24 /* virtio mem */
 #define VIRTIO_ID_FS			26 /* virtio filesystem */
 #define VIRTIO_ID_PMEM			27 /* virtio pmem */
+#define VIRTIO_ID_BT			28 /* virtio bluetooth */

ID 28 is already reserved for virtio-rpmb:
https://github.com/oasis-tcs/virtio-spec/issues/58

To avoid major compatibility pains going forward I think this should be changed to ID 40 before v5.13. It won't be easy to fix afterwards since it's UAPI.

Probably a good idea to fix or revert virtio_bt.h as well before it's too late. Patches to the virtio headers should Cc [email protected] and perhaps [email protected] because they can provide guidance about this.

Thanks,
Jean

Quoted 6 lines
include/uapi/linux/virtio_ids.h +0 -0
 #define VIRTIO_ID_MAC80211_HWSIM	29 /* virtio mac80211-hwsim */
 
 #endif /* _LINUX_VIRTIO_IDS_H */
Signature · 1 line
2.30.2