Skip to contentSkip to conversation

Add FU740 chip and HiFive Unmatched board support

PATCH Superseded Green Wan 3 participants 15 messages Apr 8, 2021 – May 3, 2021 2 messages not in the archive

Subsystems (7)

v6 of 12 Superseded Latest is v12 →

lore
Share & tools
lore

Green Wan

author
#0 lore raw

v6 cover Add FU740 chip and HiFive Unmatched board support

This patch set is to add SiFive fu740 chip and HiFive Unmatched board support. Patches are split into several parts:

- [PATCH 1/7] dts for fu740
- [PATCH 2/7] support for fu740 cpu
- [PATCH 3/7] support for fu740 clk driver
- [PATCH 4/7] rename and support for fu740 ram driver
- [PATCH 5/7] add pcie driver
- [PATCH 6/7] add unmatched board
- [PATCH 7/7] add fu740 support to macb driver

Description

- For fu740 cpu support, reuse most of fu540 cpu.
- For prci driver, add one abstract layer to separate fu540 and fu740. Move orignal fu540 code to separate files.
- For pcie driver, it depends on gpio, prci, clk and reset drivers to do init&reset works.
- Align with Linux DT file.

Tests and patch checks

- Able to boot both unmatched and unleashed boards.
- PCIe tests
. M.2 NVMe SSD
. e1000 compatibale ethernet adapter (ping&tftpboot) . pci-to-usb adapter(usb mass storage)
- checkpatch is performed. To keep code derived from other boards the same, ignore some warnings/errors in [PATCH 7/8].

Changlogs
- V6
. Remove redundant DT string for 1.2GHz CPU clock and squash to
[1/7]
- V5
. Fix unleashed build error in patch [6/8]
. Append one more set for 1.2GHz CPU speed
. Add "#include <asm/global_data.h>" back to sifive_ddr.c . Add Reviewed-by to [4/8] and [7/8]
- V4
. fixed incorrect file name in ./board/sifive/unmatched/Makefile . fixed link in doc/board/sifive/index.rst, passed 'make htmldocs'
- V3
. Rebase to unleashed rename v2 patch
. Rename
doc/board/sifive/unmatched.rst board/sifive/unmatched/unmatched.c
. Fix tail whitespace
. Add 'git mv' info to ram driver and merge patch back to one . Add comment to macb driver for PLL hardware quirk
. Add reviewed-by to patch [6/7]
. Add 'gpio-poweroff' node for upcoming opensbi integration
- V2
. Rebase to unleashed rename patch
. remove unnessaary fu540 changes
. split ram driver patch into 2 to keep 'git mv' info
. use a shorter name for unmatched support
. Remove redundant&incorrect temperature-sensor in DT
. Remove unnecessary USB EHCI & OHCI from defconfig
. Revised fu740 doc
. Fixed year of copyright
. Add reviewed-by received in v1 patch

David Abdurachmanov (1):
drivers: net: macb: add fu740 support

Green Wan (6):
riscv: dts: add fu740 support
riscv: cpu: fu740: Add support for cpu fu740
drivers: clk: add fu740 support
drivers: ram: sifive: rename fu540_ddr and add fu740 support
drivers: pci: add pcie support for fu740
board: sifive: add HiFive Unmatched board support

 arch/riscv/Kconfig                            |    5 +
 arch/riscv/cpu/fu740/Kconfig                  |   37 +
 arch/riscv/cpu/fu740/Makefile                 |   12 +
 arch/riscv/cpu/fu740/cache.c                  |   55 +
 arch/riscv/cpu/fu740/cpu.c                    |   22 +
 arch/riscv/cpu/fu740/dram.c                   |   38 +
 arch/riscv/cpu/fu740/spl.c                    |   23 +
 arch/riscv/dts/Makefile                       |    1 +
 arch/riscv/dts/fu740-c000-u-boot.dtsi         |  105 ++
 arch/riscv/dts/fu740-c000.dtsi                |  329 ++++
 .../dts/fu740-hifive-unmatched-a00-ddr.dtsi   | 1489 +++++++++++++++++
 .../dts/hifive-unmatched-a00-u-boot.dtsi      |   40 +
 arch/riscv/dts/hifive-unmatched-a00.dts       |  259 +++
 arch/riscv/include/asm/arch-fu740/cache.h     |   14 +
 arch/riscv/include/asm/arch-fu740/clk.h       |   14 +
 arch/riscv/include/asm/arch-fu740/gpio.h      |   38 +
 arch/riscv/include/asm/arch-fu740/reset.h     |   13 +
 arch/riscv/include/asm/arch-fu740/spl.h       |   14 +
 arch/riscv/lib/sifive_clint.c                 |    1 -
 board/sifive/unleashed/Kconfig                |    1 +
 board/sifive/unmatched/Kconfig                |   50 +
 board/sifive/unmatched/MAINTAINERS            |    9 +
 board/sifive/unmatched/Makefile               |    9 +
 board/sifive/unmatched/spl.c                  |   85 +
 board/sifive/unmatched/unmatched.c            |   24 +
 common/spl/Kconfig                            |    4 +-
 configs/sifive_unleashed_defconfig            |    1 +
 configs/sifive_unmatched_defconfig            |   53 +
 doc/board/sifive/index.rst                    |    1 +
 doc/board/sifive/unmatched.rst                |  536 ++++++
 drivers/clk/sifive/Kconfig                    |    8 +-
 drivers/clk/sifive/Makefile                   |    4 +-
 drivers/clk/sifive/fu540-prci.c               |  769 +--------
 drivers/clk/sifive/fu540-prci.h               |   22 +
 drivers/clk/sifive/fu740-prci.c               |  158 ++
 drivers/clk/sifive/fu740-prci.h               |   22 +
 drivers/clk/sifive/sifive-prci.c              |  733 ++++++++
 drivers/clk/sifive/sifive-prci.h              |  323 ++++
 drivers/net/macb.c                            |   13 +-
 drivers/pci/Kconfig                           |    9 +
 drivers/pci/Makefile                          |    1 +
 drivers/pci/pcie_sifive.c                     |  797 +++++++++
 drivers/pci/pcie_sifive.h                     |  374 +++++
 drivers/ram/sifive/Kconfig                    |    8 +-
 drivers/ram/sifive/Makefile                   |    2 +-
 .../ram/sifive/{fu540_ddr.c => sifive_ddr.c}  |   89 +-
 drivers/reset/Kconfig                         |    2 +-
 include/configs/sifive-unmatched.h            |   85 +
 include/dt-bindings/clock/sifive-fu740-prci.h |   25 +
 include/dt-bindings/reset/sifive-fu740-prci.h |   19 +
 50 files changed, 5938 insertions(+), 807 deletions(-)
 create mode 100644 arch/riscv/cpu/fu740/Kconfig
 create mode 100644 arch/riscv/cpu/fu740/Makefile
 create mode 100644 arch/riscv/cpu/fu740/cache.c
 create mode 100644 arch/riscv/cpu/fu740/cpu.c
 create mode 100644 arch/riscv/cpu/fu740/dram.c
 create mode 100644 arch/riscv/cpu/fu740/spl.c
 create mode 100644 arch/riscv/dts/fu740-c000-u-boot.dtsi
 create mode 100644 arch/riscv/dts/fu740-c000.dtsi
 create mode 100644 arch/riscv/dts/fu740-hifive-unmatched-a00-ddr.dtsi
 create mode 100644 arch/riscv/dts/hifive-unmatched-a00-u-boot.dtsi
 create mode 100644 arch/riscv/dts/hifive-unmatched-a00.dts
 create mode 100644 arch/riscv/include/asm/arch-fu740/cache.h
 create mode 100644 arch/riscv/include/asm/arch-fu740/clk.h
 create mode 100644 arch/riscv/include/asm/arch-fu740/gpio.h
 create mode 100644 arch/riscv/include/asm/arch-fu740/reset.h
 create mode 100644 arch/riscv/include/asm/arch-fu740/spl.h
 create mode 100644 board/sifive/unmatched/Kconfig
 create mode 100644 board/sifive/unmatched/MAINTAINERS
 create mode 100644 board/sifive/unmatched/Makefile
 create mode 100644 board/sifive/unmatched/spl.c
 create mode 100644 board/sifive/unmatched/unmatched.c
 create mode 100644 configs/sifive_unmatched_defconfig
 create mode 100644 doc/board/sifive/unmatched.rst
 create mode 100644 drivers/clk/sifive/fu540-prci.h
 create mode 100644 drivers/clk/sifive/fu740-prci.c
 create mode 100644 drivers/clk/sifive/fu740-prci.h
 create mode 100644 drivers/clk/sifive/sifive-prci.c
 create mode 100644 drivers/clk/sifive/sifive-prci.h
 create mode 100644 drivers/pci/pcie_sifive.c
 create mode 100644 drivers/pci/pcie_sifive.h
 rename drivers/ram/sifive/{fu540_ddr.c => sifive_ddr.c} (81%)
 create mode 100644 include/configs/sifive-unmatched.h
 create mode 100644 include/dt-bindings/clock/sifive-fu740-prci.h
 create mode 100644 include/dt-bindings/reset/sifive-fu740-prci.h
Signature · 1 line
2.31.0
author
#1 lore raw

PATCH v6 1/7 riscv: dts: add fu740 support

Add dts support for fu740. The HiFive Unmatched support is based on fu740 cpu and drivers in following patch set.

[greentime.hu: set fu740 speed to 1.2GHz]
---
 arch/riscv/dts/Makefile                       |   1 +
 arch/riscv/dts/fu740-c000-u-boot.dtsi         | 105 ++++++
 arch/riscv/dts/fu740-c000.dtsi                | 329 ++++++++++++++++++
 include/dt-bindings/clock/sifive-fu740-prci.h |  25 ++
 include/dt-bindings/reset/sifive-fu740-prci.h |  19 +
 5 files changed, 479 insertions(+)
 create mode 100644 arch/riscv/dts/fu740-c000-u-boot.dtsi
 create mode 100644 arch/riscv/dts/fu740-c000.dtsi
 create mode 100644 include/dt-bindings/clock/sifive-fu740-prci.h
 create mode 100644 include/dt-bindings/reset/sifive-fu740-prci.h
arch/riscv/dts/Makefile +1 -0
index 8138d89d84..ed32f56c9e 100644
@@ -2,6 +2,7 @@
 
 dtb-$(CONFIG_TARGET_AX25_AE350) += ae350_32.dtb ae350_64.dtb
 dtb-$(CONFIG_TARGET_SIFIVE_UNLEASHED) += hifive-unleashed-a00.dtb
+dtb-$(CONFIG_TARGET_SIFIVE_UNMATCHED) += hifive-unmatched-a00.dtb
 dtb-$(CONFIG_TARGET_SIPEED_MAIX) += k210-maix-bit.dtb
 dtb-$(CONFIG_TARGET_MICROCHIP_ICICLE) += microchip-mpfs-icicle-kit.dtb
 
arch/riscv/dts/fu740-c000-u-boot.dtsi new file +105 -0

105 lines not on this page · raw message

arch/riscv/dts/fu740-c000.dtsi new file +329 -0

329 lines not on this page · raw message

include/dt-bindings/clock/sifive-fu740-prci.h new file +25 -0
new file mode 100644
index 0000000000..c1224783c0
@@ -0,0 +1,25 @@
+/* SPDX-License-Identifier: GPL-2.0 OR MIT */
+/*
+ * Copyright (C) 2020-2021 SiFive, Inc.
+ * Wesley Terpstra
+ * Paul Walmsley
+ * Zong Li
+ * Pragnesh Patel
+ */
+
+#ifndef __DT_BINDINGS_CLOCK_SIFIVE_FU740_PRCI_H
+#define __DT_BINDINGS_CLOCK_SIFIVE_FU740_PRCI_H
+
+/* Clock indexes for use by Device Tree data and the PRCI driver */
+
+#define PRCI_CLK_COREPLL	0
+#define PRCI_CLK_DDRPLL		1
+#define PRCI_CLK_GEMGXLPLL	2
+#define PRCI_CLK_DVFSCOREPLL	3
+#define PRCI_CLK_HFPCLKPLL	4
+#define PRCI_CLK_CLTXPLL	5
+#define PRCI_CLK_TLCLK		6
+#define PRCI_CLK_PCLK		7
+#define PRCI_CLK_PCIEAUX	8
+
+#endif
include/dt-bindings/reset/sifive-fu740-prci.h new file +19 -0
new file mode 100644
index 0000000000..02210f4105
@@ -0,0 +1,19 @@
+/* SPDX-License-Identifier: GPL-2.0 OR MIT */
+/*
+ * Copyright (C) 2020-2021 Sifive, Inc.
+ * Author: Pragnesh Patel <[email protected]>
+ */
+
+#ifndef __DT_BINDINGS_RESET_SIFIVE_FU740_PRCI_H
+#define __DT_BINDINGS_RESET_SIFIVE_FU740_PRCI_H
+
+/* Reset indexes for use by device tree data and the PRCI driver */
+#define PRCI_RST_DDR_CTRL_N		0
+#define PRCI_RST_DDR_AXI_N		1
+#define PRCI_RST_DDR_AHB_N		2
+#define PRCI_RST_DDR_PHY_N		3
+#define PRCI_RST_PCIE_POWER_UP_N	4
+#define PRCI_RST_GEMGXL_N		5
+#define PRCI_RST_CLTX_N			6
+
+#endif
Signature · 1 line
2.31.0

A message that is not in the archive (sent off-list or not yet received): [email protected]

#3 lore raw

PATCH v6 1/7 riscv: dts: add fu740 support

Hi Green,

Quoted 29 lines

From: Green Wan [mailto:green.wan at sifive.com]
Sent: Thursday, April 08, 2021 9:40 PM
Cc: bmeng.cn at gmail.com; Green Wan; Greentime Hu; Rick Jian-Zhi Chen(???); Paul Walmsley; Palmer Dabbelt; Anup Patel; Atish Patra; Pragnesh Patel; Lukasz Majewski; Joe Hershberger; Ramon Fried; u-boot at lists.denx.de
Subject: [PATCH v6 1/7] riscv: dts: add fu740 support

Add dts support for fu740. The HiFive Unmatched support is based on fu740 cpu and drivers in following patch set.

[greentime.hu: set fu740 speed to 1.2GHz]
---
 arch/riscv/dts/Makefile                       |   1 +
 arch/riscv/dts/fu740-c000-u-boot.dtsi         | 105 ++++++
 arch/riscv/dts/fu740-c000.dtsi                | 329 ++++++++++++++++++
 include/dt-bindings/clock/sifive-fu740-prci.h |  25 ++
 include/dt-bindings/reset/sifive-fu740-prci.h |  19 +
 5 files changed, 479 insertions(+)
 create mode 100644 arch/riscv/dts/fu740-c000-u-boot.dtsi
 create mode 100644 arch/riscv/dts/fu740-c000.dtsi
 create mode 100644 include/dt-bindings/clock/sifive-fu740-prci.h
 create mode 100644 include/dt-bindings/reset/sifive-fu740-prci.h
arch/riscv/dts/Makefile +0 -0
index 8138d89d84..ed32f56c9e 100644

arch/riscv/dts/Makefile line 5

Quoted 4 lines
arch/riscv/dts/Makefile +1 -0
@@ -2,6 +2,7 @@
 
 dtb-$(CONFIG_TARGET_AX25_AE350) += ae350_32.dtb ae350_64.dtb
 dtb-$(CONFIG_TARGET_SIFIVE_UNLEASHED) += hifive-unleashed-a00.dtb
+dtb-$(CONFIG_TARGET_SIFIVE_UNMATCHED) += hifive-unmatched-a00.dtb

Makefile need the dts file, but it is not exist in this patch. It doesn't make sense.

Maybe you can combine with the dts relative files in [PATCH v6 6/7] into one patch and name as :
riscv: dts: ...

LGTM.
Other than that,

Quoted 507 lines
arch/riscv/dts/Makefile +0 -0
 dtb-$(CONFIG_TARGET_SIPEED_MAIX) += k210-maix-bit.dtb
 dtb-$(CONFIG_TARGET_MICROCHIP_ICICLE) += microchip-mpfs-icicle-kit.dtb
 
arch/riscv/dts/fu740-c000-u-boot.dtsi new file +105 -0
new file mode 100644
index 0000000000..a5d0688b06
@@ -0,0 +1,105 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * (C) Copyright 2020-2021 SiFive, Inc
+ */
+
+#include <dt-bindings/reset/sifive-fu740-prci.h>
+
+/ {
+       cpus {
+               assigned-clocks = <&prci PRCI_CLK_COREPLL>;
+               assigned-clock-rates = <1200000000>;
+               u-boot,dm-spl;
+               cpu0: cpu at 0 {
+                       clocks = <&prci PRCI_CLK_COREPLL>;
+                       u-boot,dm-spl;
+                       status = "okay";
+                       cpu0_intc: interrupt-controller {
+                               u-boot,dm-spl;
+                       };
+               };
+               cpu1: cpu at 1 {
+                       clocks = <&prci PRCI_CLK_COREPLL>;
+                       u-boot,dm-spl;
+                       cpu1_intc: interrupt-controller {
+                               u-boot,dm-spl;
+                       };
+               };
+               cpu2: cpu at 2 {
+                       clocks = <&prci PRCI_CLK_COREPLL>;
+                       u-boot,dm-spl;
+                       cpu2_intc: interrupt-controller {
+                                u-boot,dm-spl;
+                       };
+               };
+               cpu3: cpu at 3 {
+                       clocks = <&prci PRCI_CLK_COREPLL>;
+                       u-boot,dm-spl;
+                       cpu3_intc: interrupt-controller {
+                               u-boot,dm-spl;
+                       };
+               };
+               cpu4: cpu at 4 {
+                       clocks = <&prci PRCI_CLK_COREPLL>;
+                       u-boot,dm-spl;
+                       cpu4_intc: interrupt-controller {
+                               u-boot,dm-spl;
+                       };
+               };
+       };
+
+       soc {
+               u-boot,dm-spl;
+               clint: clint at 2000000 {
+                       compatible = "riscv,clint0";
+                       interrupts-extended = <&cpu0_intc 3 &cpu0_intc 7
+                                              &cpu1_intc 3 &cpu1_intc 7
+                                              &cpu2_intc 3 &cpu2_intc 7
+                                              &cpu3_intc 3 &cpu3_intc 7
+                                              &cpu4_intc 3 &cpu4_intc 7>;
+                       reg = <0x0 0x2000000 0x0 0x10000>;
+                       u-boot,dm-spl;
+               };
+               prci: clock-controller at 10000000 {
+                       #reset-cells = <1>;
+                       resets = <&prci PRCI_RST_DDR_CTRL_N>,
+                                <&prci PRCI_RST_DDR_AXI_N>,
+                                <&prci PRCI_RST_DDR_AHB_N>,
+                                <&prci PRCI_RST_DDR_PHY_N>,
+                                <&prci PRCI_RST_GEMGXL_N>,
+                                <&prci PRCI_RST_CLTX_N>;
+                       reset-names = "ddr_ctrl", "ddr_axi", "ddr_ahb",
+                                       "ddr_phy", "gemgxl_reset", "cltx_reset";
+               };
+               dmc: dmc at 100b0000 {
+                       compatible = "sifive,fu740-c000-ddr";
+                       reg = <0x0 0x100b0000 0x0 0x0800
+                              0x0 0x100b2000 0x0 0x2000
+                              0x0 0x100b8000 0x0 0x1000>;
+                       clocks = <&prci PRCI_CLK_DDRPLL>;
+                       clock-frequency = <933333324>;
+                       u-boot,dm-spl;
+               };
+       };
+};
+
+&prci {
+       u-boot,dm-spl;
+};
+
+&uart0 {
+       u-boot,dm-spl;
+};
+
+&spi0 {
+       u-boot,dm-spl;
+};
+
+&eth0 {
+       assigned-clocks = <&prci PRCI_CLK_GEMGXLPLL>;
+       assigned-clock-rates = <125125000>;
+};
+
+&ccache {
+       status = "okay";
+};
arch/riscv/dts/fu740-c000.dtsi new file +329 -0
new file mode 100644
index 0000000000..0325e51e39
@@ -0,0 +1,329 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/* Copyright (c) 2020-2021 SiFive, Inc */
+
+/dts-v1/;
+
+#include <dt-bindings/clock/sifive-fu740-prci.h>
+#include <dt-bindings/reset/sifive-fu740-prci.h>
+
+/ {
+       #address-cells = <2>;
+       #size-cells = <2>;
+       compatible = "sifive,fu740-c000", "sifive,fu740";
+
+       aliases {
+               serial0 = &uart0;
+               serial1 = &uart1;
+               ethernet0 = &eth0;
+       };
+
+       chosen {
+       };
+
+       cpus {
+               #address-cells = <1>;
+               #size-cells = <0>;
+               cpu0: cpu at 0 {
+                       compatible = "sifive,bullet0", "riscv";
+                       device_type = "cpu";
+                       i-cache-block-size = <64>;
+                       i-cache-sets = <128>;
+                       i-cache-size = <16384>;
+                       next-level-cache = <&ccache>;
+                       reg = <0x0>;
+                       riscv,isa = "rv64imac";
+                       status = "disabled";
+                       cpu0_intc: interrupt-controller {
+                               #interrupt-cells = <1>;
+                               compatible = "riscv,cpu-intc";
+                               interrupt-controller;
+                       };
+               };
+               cpu1: cpu at 1 {
+                       compatible = "sifive,bullet0", "riscv";
+                       d-cache-block-size = <64>;
+                       d-cache-sets = <64>;
+                       d-cache-size = <32768>;
+                       d-tlb-sets = <1>;
+                       d-tlb-size = <40>;
+                       device_type = "cpu";
+                       i-cache-block-size = <64>;
+                       i-cache-sets = <128>;
+                       i-cache-size = <32768>;
+                       i-tlb-sets = <1>;
+                       i-tlb-size = <40>;
+                       mmu-type = "riscv,sv39";
+                       next-level-cache = <&ccache>;
+                       reg = <0x1>;
+                       riscv,isa = "rv64imafdc";
+                       tlb-split;
+                       cpu1_intc: interrupt-controller {
+                               #interrupt-cells = <1>;
+                               compatible = "riscv,cpu-intc";
+                               interrupt-controller;
+                       };
+               };
+               cpu2: cpu at 2 {
+                       compatible = "sifive,bullet0", "riscv";
+                       d-cache-block-size = <64>;
+                       d-cache-sets = <64>;
+                       d-cache-size = <32768>;
+                       d-tlb-sets = <1>;
+                       d-tlb-size = <40>;
+                       device_type = "cpu";
+                       i-cache-block-size = <64>;
+                       i-cache-sets = <128>;
+                       i-cache-size = <32768>;
+                       i-tlb-sets = <1>;
+                       i-tlb-size = <40>;
+                       mmu-type = "riscv,sv39";
+                       next-level-cache = <&ccache>;
+                       reg = <0x2>;
+                       riscv,isa = "rv64imafdc";
+                       tlb-split;
+                       cpu2_intc: interrupt-controller {
+                               #interrupt-cells = <1>;
+                               compatible = "riscv,cpu-intc";
+                               interrupt-controller;
+                       };
+               };
+               cpu3: cpu at 3 {
+                       compatible = "sifive,bullet0", "riscv";
+                       d-cache-block-size = <64>;
+                       d-cache-sets = <64>;
+                       d-cache-size = <32768>;
+                       d-tlb-sets = <1>;
+                       d-tlb-size = <40>;
+                       device_type = "cpu";
+                       i-cache-block-size = <64>;
+                       i-cache-sets = <128>;
+                       i-cache-size = <32768>;
+                       i-tlb-sets = <1>;
+                       i-tlb-size = <40>;
+                       mmu-type = "riscv,sv39";
+                       next-level-cache = <&ccache>;
+                       reg = <0x3>;
+                       riscv,isa = "rv64imafdc";
+                       tlb-split;
+                       cpu3_intc: interrupt-controller {
+                               #interrupt-cells = <1>;
+                               compatible = "riscv,cpu-intc";
+                               interrupt-controller;
+                       };
+               };
+               cpu4: cpu at 4 {
+                       compatible = "sifive,bullet0", "riscv";
+                       d-cache-block-size = <64>;
+                       d-cache-sets = <64>;
+                       d-cache-size = <32768>;
+                       d-tlb-sets = <1>;
+                       d-tlb-size = <40>;
+                       device_type = "cpu";
+                       i-cache-block-size = <64>;
+                       i-cache-sets = <128>;
+                       i-cache-size = <32768>;
+                       i-tlb-sets = <1>;
+                       i-tlb-size = <40>;
+                       mmu-type = "riscv,sv39";
+                       next-level-cache = <&ccache>;
+                       reg = <0x4>;
+                       riscv,isa = "rv64imafdc";
+                       tlb-split;
+                       cpu4_intc: interrupt-controller {
+                               #interrupt-cells = <1>;
+                               compatible = "riscv,cpu-intc";
+                               interrupt-controller;
+                       };
+               };
+       };
+       soc {
+               #address-cells = <2>;
+               #size-cells = <2>;
+               compatible = "sifive,fu740-c000", "sifive,fu740", "simple-bus";
+               ranges;
+               plic0: interrupt-controller at c000000 {
+                       #interrupt-cells = <1>;
+                       compatible = "sifive,plic-1.0.0";
+                       reg = <0x0 0xc000000 0x0 0x4000000>;
+                       riscv,ndev = <69>;
+                       interrupt-controller;
+                       interrupts-extended = <
+                               &cpu0_intc 0xffffffff
+                               &cpu1_intc 0xffffffff &cpu1_intc 9
+                               &cpu2_intc 0xffffffff &cpu2_intc 9
+                               &cpu3_intc 0xffffffff &cpu3_intc 9
+                               &cpu4_intc 0xffffffff &cpu4_intc 9>;
+               };
+               prci: clock-controller at 10000000 {
+                       compatible = "sifive,fu740-c000-prci";
+                       reg = <0x0 0x10000000 0x0 0x1000>;
+                       clocks = <&hfclk>, <&rtcclk>;
+                       #clock-cells = <1>;
+                       #reset-cells = <1>;
+               };
+               uart0: serial at 10010000 {
+                       compatible = "sifive,fu740-c000-uart", "sifive,uart0";
+                       reg = <0x0 0x10010000 0x0 0x1000>;
+                       interrupt-parent = <&plic0>;
+                       interrupts = <39>;
+                       clocks = <&prci PRCI_CLK_PCLK>;
+                       status = "disabled";
+               };
+               uart1: serial at 10011000 {
+                       compatible = "sifive,fu740-c000-uart", "sifive,uart0";
+                       reg = <0x0 0x10011000 0x0 0x1000>;
+                       interrupt-parent = <&plic0>;
+                       interrupts = <40>;
+                       clocks = <&prci PRCI_CLK_PCLK>;
+                       status = "disabled";
+               };
+               i2c0: i2c at 10030000 {
+                       compatible = "sifive,fu740-c000-i2c", "sifive,i2c0";
+                       reg = <0x0 0x10030000 0x0 0x1000>;
+                       interrupt-parent = <&plic0>;
+                       interrupts = <52>;
+                       clocks = <&prci PRCI_CLK_PCLK>;
+                       reg-shift = <2>;
+                       reg-io-width = <1>;
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       status = "disabled";
+               };
+               i2c1: i2c at 10031000 {
+                       compatible = "sifive,fu740-c000-i2c", "sifive,i2c0";
+                       reg = <0x0 0x10031000 0x0 0x1000>;
+                       interrupt-parent = <&plic0>;
+                       interrupts = <53>;
+                       clocks = <&prci PRCI_CLK_PCLK>;
+                       reg-shift = <2>;
+                       reg-io-width = <1>;
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       status = "disabled";
+               };
+               qspi0: spi at 10040000 {
+                       compatible = "sifive,fu740-c000-spi", "sifive,spi0";
+                       reg = <0x0 0x10040000 0x0 0x1000
+                              0x0 0x20000000 0x0 0x10000000>;
+                       interrupt-parent = <&plic0>;
+                       interrupts = <41>;
+                       clocks = <&prci PRCI_CLK_PCLK>;
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       status = "disabled";
+               };
+               qspi1: spi at 10041000 {
+                       compatible = "sifive,fu740-c000-spi", "sifive,spi0";
+                       reg = <0x0 0x10041000 0x0 0x1000
+                              0x0 0x30000000 0x0 0x10000000>;
+                       interrupt-parent = <&plic0>;
+                       interrupts = <42>;
+                       clocks = <&prci PRCI_CLK_PCLK>;
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       status = "disabled";
+               };
+               spi0: spi at 10050000 {
+                       compatible = "sifive,fu740-c000-spi", "sifive,spi0";
+                       reg = <0x0 0x10050000 0x0 0x1000>;
+                       interrupt-parent = <&plic0>;
+                       interrupts = <43>;
+                       clocks = <&prci PRCI_CLK_PCLK>;
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       status = "disabled";
+               };
+               eth0: ethernet at 10090000 {
+                       compatible = "sifive,fu740-c000-gem";
+                       interrupt-parent = <&plic0>;
+                       interrupts = <55>;
+                       reg = <0x0 0x10090000 0x0 0x2000
+                              0x0 0x100a0000 0x0 0x1000>;
+                       local-mac-address = [00 00 00 00 00 00];
+                       clock-names = "pclk", "hclk";
+                       clocks = <&prci PRCI_CLK_GEMGXLPLL>,
+                                <&prci PRCI_CLK_GEMGXLPLL>;
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       status = "disabled";
+               };
+               pwm0: pwm at 10020000 {
+                       compatible = "sifive,fu740-c000-pwm", "sifive,pwm0";
+                       reg = <0x0 0x10020000 0x0 0x1000>;
+                       interrupt-parent = <&plic0>;
+                       interrupts = <44 45 46 47>;
+                       clocks = <&prci PRCI_CLK_PCLK>;
+                       #pwm-cells = <3>;
+                       status = "disabled";
+               };
+               pwm1: pwm at 10021000 {
+                       compatible = "sifive,fu740-c000-pwm", "sifive,pwm0";
+                       reg = <0x0 0x10021000 0x0 0x1000>;
+                       interrupt-parent = <&plic0>;
+                       interrupts = <48 49 50 51>;
+                       clocks = <&prci PRCI_CLK_PCLK>;
+                       #pwm-cells = <3>;
+                       status = "disabled";
+               };
+               ccache: cache-controller at 2010000 {
+                       compatible = "sifive,fu740-c000-ccache", "cache";
+                       cache-block-size = <64>;
+                       cache-level = <2>;
+                       cache-sets = <2048>;
+                       cache-size = <2097152>;
+                       cache-unified;
+                       interrupt-parent = <&plic0>;
+                       interrupts = <19 21 22 20>;
+                       reg = <0x0 0x2010000 0x0 0x1000>;
+               };
+               gpio: gpio at 10060000 {
+                       compatible = "sifive,fu740-c000-gpio", "sifive,gpio0";
+                       interrupt-parent = <&plic0>;
+                       interrupts = <23>, <24>, <25>, <26>, <27>, <28>, <29>,
+                                    <30>, <31>, <32>, <33>, <34>, <35>, <36>,
+                                    <37>, <38>;
+                       reg = <0x0 0x10060000 0x0 0x1000>;
+                       gpio-controller;
+                       #gpio-cells = <2>;
+                       interrupt-controller;
+                       #interrupt-cells = <2>;
+                       clocks = <&prci PRCI_CLK_PCLK>;
+                       status = "disabled";
+               };
+               pcie at e00000000 {
+                       #address-cells = <3>;
+                       #interrupt-cells = <1>;
+                       #num-lanes = <8>;
+                       #size-cells = <2>;
+                       compatible = "sifive,fu740-pcie";
+                       reg = <0xe 0x00000000 0x1 0x0
+                              0xd 0xf0000000 0x0 0x10000000
+                              0x0 0x100d0000 0x0 0x1000>;
+                       reg-names = "dbi", "config", "mgmt";
+                       device_type = "pci";
+                       dma-coherent;
+                       bus-range = <0x0 0xff>;
+                       ranges = <0x81000000  0x0 0x60080000  0x0 0x60080000 0x0 0x10000
+                                 0x82000000  0x0 0x60090000  0x0 0x60090000 0x0 0xff70000
+                                 0x82000000  0x0 0x70000000  0x0 0x70000000 0x0 0x1000000
+                                 0xc3000000 0x20 0x00000000 0x20 0x00000000 0x20 0x00000000>;
+                       num-lanes = <0x8>;
+                       interrupts = <56 57 58 59 60 61 62 63 64>;
+                       interrupt-names = "msi", "inta", "intb", "intc", "intd";
+                       interrupt-parent = <&plic0>;
+                       interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+                       interrupt-map = <0x0 0x0 0x0 0x1 &plic0 57>,
+                                       <0x0 0x0 0x0 0x2 &plic0 58>,
+                                       <0x0 0x0 0x0 0x3 &plic0 59>,
+                                       <0x0 0x0 0x0 0x4 &plic0 60>;
+                       pwren-gpios = <&gpio 5 0>;
+                       perstn-gpios = <&gpio 8 0>;
+                       clocks = <&prci PRCI_CLK_PCIEAUX>;
+                       clock-names = "pcieaux";
+                       resets = <&prci PRCI_RST_PCIE_POWER_UP_N>;
+                       reset-names = "rst_n";
+
+                       status = "okay";
+               };
+       };
+};
include/dt-bindings/clock/sifive-fu740-prci.h new file +25 -0
new file mode 100644
index 0000000000..c1224783c0
@@ -0,0 +1,25 @@
+/* SPDX-License-Identifier: GPL-2.0 OR MIT */
+/*
+ * Copyright (C) 2020-2021 SiFive, Inc.
+ * Wesley Terpstra
+ * Paul Walmsley
+ * Zong Li
+ * Pragnesh Patel
+ */
+
+#ifndef __DT_BINDINGS_CLOCK_SIFIVE_FU740_PRCI_H
+#define __DT_BINDINGS_CLOCK_SIFIVE_FU740_PRCI_H
+
+/* Clock indexes for use by Device Tree data and the PRCI driver */
+
+#define PRCI_CLK_COREPLL       0
+#define PRCI_CLK_DDRPLL                1
+#define PRCI_CLK_GEMGXLPLL     2
+#define PRCI_CLK_DVFSCOREPLL   3
+#define PRCI_CLK_HFPCLKPLL     4
+#define PRCI_CLK_CLTXPLL       5
+#define PRCI_CLK_TLCLK         6
+#define PRCI_CLK_PCLK          7
+#define PRCI_CLK_PCIEAUX       8
+
+#endif
include/dt-bindings/reset/sifive-fu740-prci.h new file +19 -1
new file mode 100644
index 0000000000..02210f4105
@@ -0,0 +1,19 @@
+/* SPDX-License-Identifier: GPL-2.0 OR MIT */
+/*
+ * Copyright (C) 2020-2021 Sifive, Inc.
+ * Author: Pragnesh Patel <[email protected]>
+ */
+
+#ifndef __DT_BINDINGS_RESET_SIFIVE_FU740_PRCI_H
+#define __DT_BINDINGS_RESET_SIFIVE_FU740_PRCI_H
+
+/* Reset indexes for use by device tree data and the PRCI driver */
+#define PRCI_RST_DDR_CTRL_N            0
+#define PRCI_RST_DDR_AXI_N             1
+#define PRCI_RST_DDR_AHB_N             2
+#define PRCI_RST_DDR_PHY_N             3
+#define PRCI_RST_PCIE_POWER_UP_N       4
+#define PRCI_RST_GEMGXL_N              5
+#define PRCI_RST_CLTX_N                        6
+
+#endif
--

2.31.0

author
#4 lore raw

PATCH v6 1/7 riscv: dts: add fu740 support

Quoted 40 lines · Rick Chen

Hi Green,

Quoted 29 lines

From: Green Wan [mailto:green.wan at sifive.com]
Sent: Thursday, April 08, 2021 9:40 PM
Cc: bmeng.cn at gmail.com; Green Wan; Greentime Hu; Rick Jian-Zhi Chen(???); Paul Walmsley; Palmer Dabbelt; Anup Patel; Atish Patra; Pragnesh Patel; Lukasz Majewski; Joe Hershberger; Ramon Fried; u-boot at lists.denx.de
Subject: [PATCH v6 1/7] riscv: dts: add fu740 support

Add dts support for fu740. The HiFive Unmatched support is based on fu740 cpu and drivers in following patch set.

[greentime.hu: set fu740 speed to 1.2GHz]
---
 arch/riscv/dts/Makefile                       |   1 +
 arch/riscv/dts/fu740-c000-u-boot.dtsi         | 105 ++++++
 arch/riscv/dts/fu740-c000.dtsi                | 329 ++++++++++++++++++
 include/dt-bindings/clock/sifive-fu740-prci.h |  25 ++
 include/dt-bindings/reset/sifive-fu740-prci.h |  19 +
 5 files changed, 479 insertions(+)
 create mode 100644 arch/riscv/dts/fu740-c000-u-boot.dtsi
 create mode 100644 arch/riscv/dts/fu740-c000.dtsi
 create mode 100644 include/dt-bindings/clock/sifive-fu740-prci.h
 create mode 100644 include/dt-bindings/reset/sifive-fu740-prci.h
arch/riscv/dts/Makefile +0 -0
index 8138d89d84..ed32f56c9e 100644

arch/riscv/dts/Makefile line 5

Quoted 4 lines
arch/riscv/dts/Makefile +1 -0
@@ -2,6 +2,7 @@
 
 dtb-$(CONFIG_TARGET_AX25_AE350) += ae350_32.dtb ae350_64.dtb
 dtb-$(CONFIG_TARGET_SIFIVE_UNLEASHED) += hifive-unleashed-a00.dtb
+dtb-$(CONFIG_TARGET_SIFIVE_UNMATCHED) += hifive-unmatched-a00.dtb

Makefile need the dts file, but it is not exist in this patch. It doesn't make sense.

Quoted 3 lines

Maybe you can combine with the dts relative files in [PATCH v6 6/7] into one patch and name as :
riscv: dts: ...

Hi Rick,

Thanks for review.

How about move change of arch/riscv/dts/Makefile to [PATCH v6 6/7] since it's more like a board dependent change. This patch [1/7] is pure for fu740 dts review. I'd like to keep one for fu740 dts and the rest dts for unmatched board.

What do you think of it?

Thanks,
-
Green

Quoted 513 lines

LGTM.
Other than that,

Quoted 507 lines
arch/riscv/dts/Makefile +0 -0
 dtb-$(CONFIG_TARGET_SIPEED_MAIX) += k210-maix-bit.dtb
 dtb-$(CONFIG_TARGET_MICROCHIP_ICICLE) += microchip-mpfs-icicle-kit.dtb
 
arch/riscv/dts/fu740-c000-u-boot.dtsi new file +105 -0
new file mode 100644
index 0000000000..a5d0688b06
@@ -0,0 +1,105 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * (C) Copyright 2020-2021 SiFive, Inc
+ */
+
+#include <dt-bindings/reset/sifive-fu740-prci.h>
+
+/ {
+       cpus {
+               assigned-clocks = <&prci PRCI_CLK_COREPLL>;
+               assigned-clock-rates = <1200000000>;
+               u-boot,dm-spl;
+               cpu0: cpu at 0 {
+                       clocks = <&prci PRCI_CLK_COREPLL>;
+                       u-boot,dm-spl;
+                       status = "okay";
+                       cpu0_intc: interrupt-controller {
+                               u-boot,dm-spl;
+                       };
+               };
+               cpu1: cpu at 1 {
+                       clocks = <&prci PRCI_CLK_COREPLL>;
+                       u-boot,dm-spl;
+                       cpu1_intc: interrupt-controller {
+                               u-boot,dm-spl;
+                       };
+               };
+               cpu2: cpu at 2 {
+                       clocks = <&prci PRCI_CLK_COREPLL>;
+                       u-boot,dm-spl;
+                       cpu2_intc: interrupt-controller {
+                                u-boot,dm-spl;
+                       };
+               };
+               cpu3: cpu at 3 {
+                       clocks = <&prci PRCI_CLK_COREPLL>;
+                       u-boot,dm-spl;
+                       cpu3_intc: interrupt-controller {
+                               u-boot,dm-spl;
+                       };
+               };
+               cpu4: cpu at 4 {
+                       clocks = <&prci PRCI_CLK_COREPLL>;
+                       u-boot,dm-spl;
+                       cpu4_intc: interrupt-controller {
+                               u-boot,dm-spl;
+                       };
+               };
+       };
+
+       soc {
+               u-boot,dm-spl;
+               clint: clint at 2000000 {
+                       compatible = "riscv,clint0";
+                       interrupts-extended = <&cpu0_intc 3 &cpu0_intc 7
+                                              &cpu1_intc 3 &cpu1_intc 7
+                                              &cpu2_intc 3 &cpu2_intc 7
+                                              &cpu3_intc 3 &cpu3_intc 7
+                                              &cpu4_intc 3 &cpu4_intc 7>;
+                       reg = <0x0 0x2000000 0x0 0x10000>;
+                       u-boot,dm-spl;
+               };
+               prci: clock-controller at 10000000 {
+                       #reset-cells = <1>;
+                       resets = <&prci PRCI_RST_DDR_CTRL_N>,
+                                <&prci PRCI_RST_DDR_AXI_N>,
+                                <&prci PRCI_RST_DDR_AHB_N>,
+                                <&prci PRCI_RST_DDR_PHY_N>,
+                                <&prci PRCI_RST_GEMGXL_N>,
+                                <&prci PRCI_RST_CLTX_N>;
+                       reset-names = "ddr_ctrl", "ddr_axi", "ddr_ahb",
+                                       "ddr_phy", "gemgxl_reset", "cltx_reset";
+               };
+               dmc: dmc at 100b0000 {
+                       compatible = "sifive,fu740-c000-ddr";
+                       reg = <0x0 0x100b0000 0x0 0x0800
+                              0x0 0x100b2000 0x0 0x2000
+                              0x0 0x100b8000 0x0 0x1000>;
+                       clocks = <&prci PRCI_CLK_DDRPLL>;
+                       clock-frequency = <933333324>;
+                       u-boot,dm-spl;
+               };
+       };
+};
+
+&prci {
+       u-boot,dm-spl;
+};
+
+&uart0 {
+       u-boot,dm-spl;
+};
+
+&spi0 {
+       u-boot,dm-spl;
+};
+
+&eth0 {
+       assigned-clocks = <&prci PRCI_CLK_GEMGXLPLL>;
+       assigned-clock-rates = <125125000>;
+};
+
+&ccache {
+       status = "okay";
+};
arch/riscv/dts/fu740-c000.dtsi new file +329 -0
new file mode 100644
index 0000000000..0325e51e39
@@ -0,0 +1,329 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/* Copyright (c) 2020-2021 SiFive, Inc */
+
+/dts-v1/;
+
+#include <dt-bindings/clock/sifive-fu740-prci.h>
+#include <dt-bindings/reset/sifive-fu740-prci.h>
+
+/ {
+       #address-cells = <2>;
+       #size-cells = <2>;
+       compatible = "sifive,fu740-c000", "sifive,fu740";
+
+       aliases {
+               serial0 = &uart0;
+               serial1 = &uart1;
+               ethernet0 = &eth0;
+       };
+
+       chosen {
+       };
+
+       cpus {
+               #address-cells = <1>;
+               #size-cells = <0>;
+               cpu0: cpu at 0 {
+                       compatible = "sifive,bullet0", "riscv";
+                       device_type = "cpu";
+                       i-cache-block-size = <64>;
+                       i-cache-sets = <128>;
+                       i-cache-size = <16384>;
+                       next-level-cache = <&ccache>;
+                       reg = <0x0>;
+                       riscv,isa = "rv64imac";
+                       status = "disabled";
+                       cpu0_intc: interrupt-controller {
+                               #interrupt-cells = <1>;
+                               compatible = "riscv,cpu-intc";
+                               interrupt-controller;
+                       };
+               };
+               cpu1: cpu at 1 {
+                       compatible = "sifive,bullet0", "riscv";
+                       d-cache-block-size = <64>;
+                       d-cache-sets = <64>;
+                       d-cache-size = <32768>;
+                       d-tlb-sets = <1>;
+                       d-tlb-size = <40>;
+                       device_type = "cpu";
+                       i-cache-block-size = <64>;
+                       i-cache-sets = <128>;
+                       i-cache-size = <32768>;
+                       i-tlb-sets = <1>;
+                       i-tlb-size = <40>;
+                       mmu-type = "riscv,sv39";
+                       next-level-cache = <&ccache>;
+                       reg = <0x1>;
+                       riscv,isa = "rv64imafdc";
+                       tlb-split;
+                       cpu1_intc: interrupt-controller {
+                               #interrupt-cells = <1>;
+                               compatible = "riscv,cpu-intc";
+                               interrupt-controller;
+                       };
+               };
+               cpu2: cpu at 2 {
+                       compatible = "sifive,bullet0", "riscv";
+                       d-cache-block-size = <64>;
+                       d-cache-sets = <64>;
+                       d-cache-size = <32768>;
+                       d-tlb-sets = <1>;
+                       d-tlb-size = <40>;
+                       device_type = "cpu";
+                       i-cache-block-size = <64>;
+                       i-cache-sets = <128>;
+                       i-cache-size = <32768>;
+                       i-tlb-sets = <1>;
+                       i-tlb-size = <40>;
+                       mmu-type = "riscv,sv39";
+                       next-level-cache = <&ccache>;
+                       reg = <0x2>;
+                       riscv,isa = "rv64imafdc";
+                       tlb-split;
+                       cpu2_intc: interrupt-controller {
+                               #interrupt-cells = <1>;
+                               compatible = "riscv,cpu-intc";
+                               interrupt-controller;
+                       };
+               };
+               cpu3: cpu at 3 {
+                       compatible = "sifive,bullet0", "riscv";
+                       d-cache-block-size = <64>;
+                       d-cache-sets = <64>;
+                       d-cache-size = <32768>;
+                       d-tlb-sets = <1>;
+                       d-tlb-size = <40>;
+                       device_type = "cpu";
+                       i-cache-block-size = <64>;
+                       i-cache-sets = <128>;
+                       i-cache-size = <32768>;
+                       i-tlb-sets = <1>;
+                       i-tlb-size = <40>;
+                       mmu-type = "riscv,sv39";
+                       next-level-cache = <&ccache>;
+                       reg = <0x3>;
+                       riscv,isa = "rv64imafdc";
+                       tlb-split;
+                       cpu3_intc: interrupt-controller {
+                               #interrupt-cells = <1>;
+                               compatible = "riscv,cpu-intc";
+                               interrupt-controller;
+                       };
+               };
+               cpu4: cpu at 4 {
+                       compatible = "sifive,bullet0", "riscv";
+                       d-cache-block-size = <64>;
+                       d-cache-sets = <64>;
+                       d-cache-size = <32768>;
+                       d-tlb-sets = <1>;
+                       d-tlb-size = <40>;
+                       device_type = "cpu";
+                       i-cache-block-size = <64>;
+                       i-cache-sets = <128>;
+                       i-cache-size = <32768>;
+                       i-tlb-sets = <1>;
+                       i-tlb-size = <40>;
+                       mmu-type = "riscv,sv39";
+                       next-level-cache = <&ccache>;
+                       reg = <0x4>;
+                       riscv,isa = "rv64imafdc";
+                       tlb-split;
+                       cpu4_intc: interrupt-controller {
+                               #interrupt-cells = <1>;
+                               compatible = "riscv,cpu-intc";
+                               interrupt-controller;
+                       };
+               };
+       };
+       soc {
+               #address-cells = <2>;
+               #size-cells = <2>;
+               compatible = "sifive,fu740-c000", "sifive,fu740", "simple-bus";
+               ranges;
+               plic0: interrupt-controller at c000000 {
+                       #interrupt-cells = <1>;
+                       compatible = "sifive,plic-1.0.0";
+                       reg = <0x0 0xc000000 0x0 0x4000000>;
+                       riscv,ndev = <69>;
+                       interrupt-controller;
+                       interrupts-extended = <
+                               &cpu0_intc 0xffffffff
+                               &cpu1_intc 0xffffffff &cpu1_intc 9
+                               &cpu2_intc 0xffffffff &cpu2_intc 9
+                               &cpu3_intc 0xffffffff &cpu3_intc 9
+                               &cpu4_intc 0xffffffff &cpu4_intc 9>;
+               };
+               prci: clock-controller at 10000000 {
+                       compatible = "sifive,fu740-c000-prci";
+                       reg = <0x0 0x10000000 0x0 0x1000>;
+                       clocks = <&hfclk>, <&rtcclk>;
+                       #clock-cells = <1>;
+                       #reset-cells = <1>;
+               };
+               uart0: serial at 10010000 {
+                       compatible = "sifive,fu740-c000-uart", "sifive,uart0";
+                       reg = <0x0 0x10010000 0x0 0x1000>;
+                       interrupt-parent = <&plic0>;
+                       interrupts = <39>;
+                       clocks = <&prci PRCI_CLK_PCLK>;
+                       status = "disabled";
+               };
+               uart1: serial at 10011000 {
+                       compatible = "sifive,fu740-c000-uart", "sifive,uart0";
+                       reg = <0x0 0x10011000 0x0 0x1000>;
+                       interrupt-parent = <&plic0>;
+                       interrupts = <40>;
+                       clocks = <&prci PRCI_CLK_PCLK>;
+                       status = "disabled";
+               };
+               i2c0: i2c at 10030000 {
+                       compatible = "sifive,fu740-c000-i2c", "sifive,i2c0";
+                       reg = <0x0 0x10030000 0x0 0x1000>;
+                       interrupt-parent = <&plic0>;
+                       interrupts = <52>;
+                       clocks = <&prci PRCI_CLK_PCLK>;
+                       reg-shift = <2>;
+                       reg-io-width = <1>;
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       status = "disabled";
+               };
+               i2c1: i2c at 10031000 {
+                       compatible = "sifive,fu740-c000-i2c", "sifive,i2c0";
+                       reg = <0x0 0x10031000 0x0 0x1000>;
+                       interrupt-parent = <&plic0>;
+                       interrupts = <53>;
+                       clocks = <&prci PRCI_CLK_PCLK>;
+                       reg-shift = <2>;
+                       reg-io-width = <1>;
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       status = "disabled";
+               };
+               qspi0: spi at 10040000 {
+                       compatible = "sifive,fu740-c000-spi", "sifive,spi0";
+                       reg = <0x0 0x10040000 0x0 0x1000
+                              0x0 0x20000000 0x0 0x10000000>;
+                       interrupt-parent = <&plic0>;
+                       interrupts = <41>;
+                       clocks = <&prci PRCI_CLK_PCLK>;
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       status = "disabled";
+               };
+               qspi1: spi at 10041000 {
+                       compatible = "sifive,fu740-c000-spi", "sifive,spi0";
+                       reg = <0x0 0x10041000 0x0 0x1000
+                              0x0 0x30000000 0x0 0x10000000>;
+                       interrupt-parent = <&plic0>;
+                       interrupts = <42>;
+                       clocks = <&prci PRCI_CLK_PCLK>;
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       status = "disabled";
+               };
+               spi0: spi at 10050000 {
+                       compatible = "sifive,fu740-c000-spi", "sifive,spi0";
+                       reg = <0x0 0x10050000 0x0 0x1000>;
+                       interrupt-parent = <&plic0>;
+                       interrupts = <43>;
+                       clocks = <&prci PRCI_CLK_PCLK>;
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       status = "disabled";
+               };
+               eth0: ethernet at 10090000 {
+                       compatible = "sifive,fu740-c000-gem";
+                       interrupt-parent = <&plic0>;
+                       interrupts = <55>;
+                       reg = <0x0 0x10090000 0x0 0x2000
+                              0x0 0x100a0000 0x0 0x1000>;
+                       local-mac-address = [00 00 00 00 00 00];
+                       clock-names = "pclk", "hclk";
+                       clocks = <&prci PRCI_CLK_GEMGXLPLL>,
+                                <&prci PRCI_CLK_GEMGXLPLL>;
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       status = "disabled";
+               };
+               pwm0: pwm at 10020000 {
+                       compatible = "sifive,fu740-c000-pwm", "sifive,pwm0";
+                       reg = <0x0 0x10020000 0x0 0x1000>;
+                       interrupt-parent = <&plic0>;
+                       interrupts = <44 45 46 47>;
+                       clocks = <&prci PRCI_CLK_PCLK>;
+                       #pwm-cells = <3>;
+                       status = "disabled";
+               };
+               pwm1: pwm at 10021000 {
+                       compatible = "sifive,fu740-c000-pwm", "sifive,pwm0";
+                       reg = <0x0 0x10021000 0x0 0x1000>;
+                       interrupt-parent = <&plic0>;
+                       interrupts = <48 49 50 51>;
+                       clocks = <&prci PRCI_CLK_PCLK>;
+                       #pwm-cells = <3>;
+                       status = "disabled";
+               };
+               ccache: cache-controller at 2010000 {
+                       compatible = "sifive,fu740-c000-ccache", "cache";
+                       cache-block-size = <64>;
+                       cache-level = <2>;
+                       cache-sets = <2048>;
+                       cache-size = <2097152>;
+                       cache-unified;
+                       interrupt-parent = <&plic0>;
+                       interrupts = <19 21 22 20>;
+                       reg = <0x0 0x2010000 0x0 0x1000>;
+               };
+               gpio: gpio at 10060000 {
+                       compatible = "sifive,fu740-c000-gpio", "sifive,gpio0";
+                       interrupt-parent = <&plic0>;
+                       interrupts = <23>, <24>, <25>, <26>, <27>, <28>, <29>,
+                                    <30>, <31>, <32>, <33>, <34>, <35>, <36>,
+                                    <37>, <38>;
+                       reg = <0x0 0x10060000 0x0 0x1000>;
+                       gpio-controller;
+                       #gpio-cells = <2>;
+                       interrupt-controller;
+                       #interrupt-cells = <2>;
+                       clocks = <&prci PRCI_CLK_PCLK>;
+                       status = "disabled";
+               };
+               pcie at e00000000 {
+                       #address-cells = <3>;
+                       #interrupt-cells = <1>;
+                       #num-lanes = <8>;
+                       #size-cells = <2>;
+                       compatible = "sifive,fu740-pcie";
+                       reg = <0xe 0x00000000 0x1 0x0
+                              0xd 0xf0000000 0x0 0x10000000
+                              0x0 0x100d0000 0x0 0x1000>;
+                       reg-names = "dbi", "config", "mgmt";
+                       device_type = "pci";
+                       dma-coherent;
+                       bus-range = <0x0 0xff>;
+                       ranges = <0x81000000  0x0 0x60080000  0x0 0x60080000 0x0 0x10000
+                                 0x82000000  0x0 0x60090000  0x0 0x60090000 0x0 0xff70000
+                                 0x82000000  0x0 0x70000000  0x0 0x70000000 0x0 0x1000000
+                                 0xc3000000 0x20 0x00000000 0x20 0x00000000 0x20 0x00000000>;
+                       num-lanes = <0x8>;
+                       interrupts = <56 57 58 59 60 61 62 63 64>;
+                       interrupt-names = "msi", "inta", "intb", "intc", "intd";
+                       interrupt-parent = <&plic0>;
+                       interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+                       interrupt-map = <0x0 0x0 0x0 0x1 &plic0 57>,
+                                       <0x0 0x0 0x0 0x2 &plic0 58>,
+                                       <0x0 0x0 0x0 0x3 &plic0 59>,
+                                       <0x0 0x0 0x0 0x4 &plic0 60>;
+                       pwren-gpios = <&gpio 5 0>;
+                       perstn-gpios = <&gpio 8 0>;
+                       clocks = <&prci PRCI_CLK_PCIEAUX>;
+                       clock-names = "pcieaux";
+                       resets = <&prci PRCI_RST_PCIE_POWER_UP_N>;
+                       reset-names = "rst_n";
+
+                       status = "okay";
+               };
+       };
+};
include/dt-bindings/clock/sifive-fu740-prci.h new file +25 -0
new file mode 100644
index 0000000000..c1224783c0
@@ -0,0 +1,25 @@
+/* SPDX-License-Identifier: GPL-2.0 OR MIT */
+/*
+ * Copyright (C) 2020-2021 SiFive, Inc.
+ * Wesley Terpstra
+ * Paul Walmsley
+ * Zong Li
+ * Pragnesh Patel
+ */
+
+#ifndef __DT_BINDINGS_CLOCK_SIFIVE_FU740_PRCI_H
+#define __DT_BINDINGS_CLOCK_SIFIVE_FU740_PRCI_H
+
+/* Clock indexes for use by Device Tree data and the PRCI driver */
+
+#define PRCI_CLK_COREPLL       0
+#define PRCI_CLK_DDRPLL                1
+#define PRCI_CLK_GEMGXLPLL     2
+#define PRCI_CLK_DVFSCOREPLL   3
+#define PRCI_CLK_HFPCLKPLL     4
+#define PRCI_CLK_CLTXPLL       5
+#define PRCI_CLK_TLCLK         6
+#define PRCI_CLK_PCLK          7
+#define PRCI_CLK_PCIEAUX       8
+
+#endif
include/dt-bindings/reset/sifive-fu740-prci.h new file +19 -1
new file mode 100644
index 0000000000..02210f4105
@@ -0,0 +1,19 @@
+/* SPDX-License-Identifier: GPL-2.0 OR MIT */
+/*
+ * Copyright (C) 2020-2021 Sifive, Inc.
+ * Author: Pragnesh Patel <[email protected]>
+ */
+
+#ifndef __DT_BINDINGS_RESET_SIFIVE_FU740_PRCI_H
+#define __DT_BINDINGS_RESET_SIFIVE_FU740_PRCI_H
+
+/* Reset indexes for use by device tree data and the PRCI driver */
+#define PRCI_RST_DDR_CTRL_N            0
+#define PRCI_RST_DDR_AXI_N             1
+#define PRCI_RST_DDR_AHB_N             2
+#define PRCI_RST_DDR_PHY_N             3
+#define PRCI_RST_PCIE_POWER_UP_N       4
+#define PRCI_RST_GEMGXL_N              5
+#define PRCI_RST_CLTX_N                        6
+
+#endif
--

2.31.0

#5 lore raw

PATCH v6 1/7 riscv: dts: add fu740 support

Hi Green

Quoted 47 lines · Rick Chen
Quoted 40 lines

Hi Green,

Quoted 29 lines

From: Green Wan [mailto:green.wan at sifive.com]
Sent: Thursday, April 08, 2021 9:40 PM
Cc: bmeng.cn at gmail.com; Green Wan; Greentime Hu; Rick Jian-Zhi Chen(???); Paul Walmsley; Palmer Dabbelt; Anup Patel; Atish Patra; Pragnesh Patel; Lukasz Majewski; Joe Hershberger; Ramon Fried; u-boot at lists.denx.de
Subject: [PATCH v6 1/7] riscv: dts: add fu740 support

Add dts support for fu740. The HiFive Unmatched support is based on fu740 cpu and drivers in following patch set.

[greentime.hu: set fu740 speed to 1.2GHz]
---
 arch/riscv/dts/Makefile                       |   1 +
 arch/riscv/dts/fu740-c000-u-boot.dtsi         | 105 ++++++
 arch/riscv/dts/fu740-c000.dtsi                | 329 ++++++++++++++++++
 include/dt-bindings/clock/sifive-fu740-prci.h |  25 ++
 include/dt-bindings/reset/sifive-fu740-prci.h |  19 +
 5 files changed, 479 insertions(+)
 create mode 100644 arch/riscv/dts/fu740-c000-u-boot.dtsi
 create mode 100644 arch/riscv/dts/fu740-c000.dtsi
 create mode 100644 include/dt-bindings/clock/sifive-fu740-prci.h
 create mode 100644 include/dt-bindings/reset/sifive-fu740-prci.h
arch/riscv/dts/Makefile +0 -0
index 8138d89d84..ed32f56c9e 100644

arch/riscv/dts/Makefile line 5

Quoted 4 lines
arch/riscv/dts/Makefile +1 -0
@@ -2,6 +2,7 @@
 
 dtb-$(CONFIG_TARGET_AX25_AE350) += ae350_32.dtb ae350_64.dtb
 dtb-$(CONFIG_TARGET_SIFIVE_UNLEASHED) += hifive-unleashed-a00.dtb
+dtb-$(CONFIG_TARGET_SIFIVE_UNMATCHED) += hifive-unmatched-a00.dtb

Makefile need the dts file, but it is not exist in this patch. It doesn't make sense.

Quoted 3 lines

Maybe you can combine with the dts relative files in [PATCH v6 6/7] into one patch and name as :
riscv: dts: ...

Hi Rick,

Quoted 8 lines

Thanks for review.

How about move change of arch/riscv/dts/Makefile to [PATCH v6 6/7] since it's more like a board dependent change. This patch [1/7] is pure for fu740 dts review. I'd like to keep one for fu740 dts and the rest dts for unmatched board.

What do you think of it?

It is OK.

You may arrange them nearby as below:
6/x riscv: dts: support fu740
7/x riscv: dst: support HiFive Unmatched board

Thanks,
Rick

Quoted 518 lines

Thanks,
-
Green

Quoted 513 lines

LGTM.
Other than that,

Quoted 507 lines
arch/riscv/dts/Makefile +0 -0
 dtb-$(CONFIG_TARGET_SIPEED_MAIX) += k210-maix-bit.dtb
 dtb-$(CONFIG_TARGET_MICROCHIP_ICICLE) += microchip-mpfs-icicle-kit.dtb
 
arch/riscv/dts/fu740-c000-u-boot.dtsi new file +105 -0
new file mode 100644
index 0000000000..a5d0688b06
@@ -0,0 +1,105 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * (C) Copyright 2020-2021 SiFive, Inc
+ */
+
+#include <dt-bindings/reset/sifive-fu740-prci.h>
+
+/ {
+       cpus {
+               assigned-clocks = <&prci PRCI_CLK_COREPLL>;
+               assigned-clock-rates = <1200000000>;
+               u-boot,dm-spl;
+               cpu0: cpu at 0 {
+                       clocks = <&prci PRCI_CLK_COREPLL>;
+                       u-boot,dm-spl;
+                       status = "okay";
+                       cpu0_intc: interrupt-controller {
+                               u-boot,dm-spl;
+                       };
+               };
+               cpu1: cpu at 1 {
+                       clocks = <&prci PRCI_CLK_COREPLL>;
+                       u-boot,dm-spl;
+                       cpu1_intc: interrupt-controller {
+                               u-boot,dm-spl;
+                       };
+               };
+               cpu2: cpu at 2 {
+                       clocks = <&prci PRCI_CLK_COREPLL>;
+                       u-boot,dm-spl;
+                       cpu2_intc: interrupt-controller {
+                                u-boot,dm-spl;
+                       };
+               };
+               cpu3: cpu at 3 {
+                       clocks = <&prci PRCI_CLK_COREPLL>;
+                       u-boot,dm-spl;
+                       cpu3_intc: interrupt-controller {
+                               u-boot,dm-spl;
+                       };
+               };
+               cpu4: cpu at 4 {
+                       clocks = <&prci PRCI_CLK_COREPLL>;
+                       u-boot,dm-spl;
+                       cpu4_intc: interrupt-controller {
+                               u-boot,dm-spl;
+                       };
+               };
+       };
+
+       soc {
+               u-boot,dm-spl;
+               clint: clint at 2000000 {
+                       compatible = "riscv,clint0";
+                       interrupts-extended = <&cpu0_intc 3 &cpu0_intc 7
+                                              &cpu1_intc 3 &cpu1_intc 7
+                                              &cpu2_intc 3 &cpu2_intc 7
+                                              &cpu3_intc 3 &cpu3_intc 7
+                                              &cpu4_intc 3 &cpu4_intc 7>;
+                       reg = <0x0 0x2000000 0x0 0x10000>;
+                       u-boot,dm-spl;
+               };
+               prci: clock-controller at 10000000 {
+                       #reset-cells = <1>;
+                       resets = <&prci PRCI_RST_DDR_CTRL_N>,
+                                <&prci PRCI_RST_DDR_AXI_N>,
+                                <&prci PRCI_RST_DDR_AHB_N>,
+                                <&prci PRCI_RST_DDR_PHY_N>,
+                                <&prci PRCI_RST_GEMGXL_N>,
+                                <&prci PRCI_RST_CLTX_N>;
+                       reset-names = "ddr_ctrl", "ddr_axi", "ddr_ahb",
+                                       "ddr_phy", "gemgxl_reset", "cltx_reset";
+               };
+               dmc: dmc at 100b0000 {
+                       compatible = "sifive,fu740-c000-ddr";
+                       reg = <0x0 0x100b0000 0x0 0x0800
+                              0x0 0x100b2000 0x0 0x2000
+                              0x0 0x100b8000 0x0 0x1000>;
+                       clocks = <&prci PRCI_CLK_DDRPLL>;
+                       clock-frequency = <933333324>;
+                       u-boot,dm-spl;
+               };
+       };
+};
+
+&prci {
+       u-boot,dm-spl;
+};
+
+&uart0 {
+       u-boot,dm-spl;
+};
+
+&spi0 {
+       u-boot,dm-spl;
+};
+
+&eth0 {
+       assigned-clocks = <&prci PRCI_CLK_GEMGXLPLL>;
+       assigned-clock-rates = <125125000>;
+};
+
+&ccache {
+       status = "okay";
+};
arch/riscv/dts/fu740-c000.dtsi new file +329 -0
new file mode 100644
index 0000000000..0325e51e39
@@ -0,0 +1,329 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/* Copyright (c) 2020-2021 SiFive, Inc */
+
+/dts-v1/;
+
+#include <dt-bindings/clock/sifive-fu740-prci.h>
+#include <dt-bindings/reset/sifive-fu740-prci.h>
+
+/ {
+       #address-cells = <2>;
+       #size-cells = <2>;
+       compatible = "sifive,fu740-c000", "sifive,fu740";
+
+       aliases {
+               serial0 = &uart0;
+               serial1 = &uart1;
+               ethernet0 = &eth0;
+       };
+
+       chosen {
+       };
+
+       cpus {
+               #address-cells = <1>;
+               #size-cells = <0>;
+               cpu0: cpu at 0 {
+                       compatible = "sifive,bullet0", "riscv";
+                       device_type = "cpu";
+                       i-cache-block-size = <64>;
+                       i-cache-sets = <128>;
+                       i-cache-size = <16384>;
+                       next-level-cache = <&ccache>;
+                       reg = <0x0>;
+                       riscv,isa = "rv64imac";
+                       status = "disabled";
+                       cpu0_intc: interrupt-controller {
+                               #interrupt-cells = <1>;
+                               compatible = "riscv,cpu-intc";
+                               interrupt-controller;
+                       };
+               };
+               cpu1: cpu at 1 {
+                       compatible = "sifive,bullet0", "riscv";
+                       d-cache-block-size = <64>;
+                       d-cache-sets = <64>;
+                       d-cache-size = <32768>;
+                       d-tlb-sets = <1>;
+                       d-tlb-size = <40>;
+                       device_type = "cpu";
+                       i-cache-block-size = <64>;
+                       i-cache-sets = <128>;
+                       i-cache-size = <32768>;
+                       i-tlb-sets = <1>;
+                       i-tlb-size = <40>;
+                       mmu-type = "riscv,sv39";
+                       next-level-cache = <&ccache>;
+                       reg = <0x1>;
+                       riscv,isa = "rv64imafdc";
+                       tlb-split;
+                       cpu1_intc: interrupt-controller {
+                               #interrupt-cells = <1>;
+                               compatible = "riscv,cpu-intc";
+                               interrupt-controller;
+                       };
+               };
+               cpu2: cpu at 2 {
+                       compatible = "sifive,bullet0", "riscv";
+                       d-cache-block-size = <64>;
+                       d-cache-sets = <64>;
+                       d-cache-size = <32768>;
+                       d-tlb-sets = <1>;
+                       d-tlb-size = <40>;
+                       device_type = "cpu";
+                       i-cache-block-size = <64>;
+                       i-cache-sets = <128>;
+                       i-cache-size = <32768>;
+                       i-tlb-sets = <1>;
+                       i-tlb-size = <40>;
+                       mmu-type = "riscv,sv39";
+                       next-level-cache = <&ccache>;
+                       reg = <0x2>;
+                       riscv,isa = "rv64imafdc";
+                       tlb-split;
+                       cpu2_intc: interrupt-controller {
+                               #interrupt-cells = <1>;
+                               compatible = "riscv,cpu-intc";
+                               interrupt-controller;
+                       };
+               };
+               cpu3: cpu at 3 {
+                       compatible = "sifive,bullet0", "riscv";
+                       d-cache-block-size = <64>;
+                       d-cache-sets = <64>;
+                       d-cache-size = <32768>;
+                       d-tlb-sets = <1>;
+                       d-tlb-size = <40>;
+                       device_type = "cpu";
+                       i-cache-block-size = <64>;
+                       i-cache-sets = <128>;
+                       i-cache-size = <32768>;
+                       i-tlb-sets = <1>;
+                       i-tlb-size = <40>;
+                       mmu-type = "riscv,sv39";
+                       next-level-cache = <&ccache>;
+                       reg = <0x3>;
+                       riscv,isa = "rv64imafdc";
+                       tlb-split;
+                       cpu3_intc: interrupt-controller {
+                               #interrupt-cells = <1>;
+                               compatible = "riscv,cpu-intc";
+                               interrupt-controller;
+                       };
+               };
+               cpu4: cpu at 4 {
+                       compatible = "sifive,bullet0", "riscv";
+                       d-cache-block-size = <64>;
+                       d-cache-sets = <64>;
+                       d-cache-size = <32768>;
+                       d-tlb-sets = <1>;
+                       d-tlb-size = <40>;
+                       device_type = "cpu";
+                       i-cache-block-size = <64>;
+                       i-cache-sets = <128>;
+                       i-cache-size = <32768>;
+                       i-tlb-sets = <1>;
+                       i-tlb-size = <40>;
+                       mmu-type = "riscv,sv39";
+                       next-level-cache = <&ccache>;
+                       reg = <0x4>;
+                       riscv,isa = "rv64imafdc";
+                       tlb-split;
+                       cpu4_intc: interrupt-controller {
+                               #interrupt-cells = <1>;
+                               compatible = "riscv,cpu-intc";
+                               interrupt-controller;
+                       };
+               };
+       };
+       soc {
+               #address-cells = <2>;
+               #size-cells = <2>;
+               compatible = "sifive,fu740-c000", "sifive,fu740", "simple-bus";
+               ranges;
+               plic0: interrupt-controller at c000000 {
+                       #interrupt-cells = <1>;
+                       compatible = "sifive,plic-1.0.0";
+                       reg = <0x0 0xc000000 0x0 0x4000000>;
+                       riscv,ndev = <69>;
+                       interrupt-controller;
+                       interrupts-extended = <
+                               &cpu0_intc 0xffffffff
+                               &cpu1_intc 0xffffffff &cpu1_intc 9
+                               &cpu2_intc 0xffffffff &cpu2_intc 9
+                               &cpu3_intc 0xffffffff &cpu3_intc 9
+                               &cpu4_intc 0xffffffff &cpu4_intc 9>;
+               };
+               prci: clock-controller at 10000000 {
+                       compatible = "sifive,fu740-c000-prci";
+                       reg = <0x0 0x10000000 0x0 0x1000>;
+                       clocks = <&hfclk>, <&rtcclk>;
+                       #clock-cells = <1>;
+                       #reset-cells = <1>;
+               };
+               uart0: serial at 10010000 {
+                       compatible = "sifive,fu740-c000-uart", "sifive,uart0";
+                       reg = <0x0 0x10010000 0x0 0x1000>;
+                       interrupt-parent = <&plic0>;
+                       interrupts = <39>;
+                       clocks = <&prci PRCI_CLK_PCLK>;
+                       status = "disabled";
+               };
+               uart1: serial at 10011000 {
+                       compatible = "sifive,fu740-c000-uart", "sifive,uart0";
+                       reg = <0x0 0x10011000 0x0 0x1000>;
+                       interrupt-parent = <&plic0>;
+                       interrupts = <40>;
+                       clocks = <&prci PRCI_CLK_PCLK>;
+                       status = "disabled";
+               };
+               i2c0: i2c at 10030000 {
+                       compatible = "sifive,fu740-c000-i2c", "sifive,i2c0";
+                       reg = <0x0 0x10030000 0x0 0x1000>;
+                       interrupt-parent = <&plic0>;
+                       interrupts = <52>;
+                       clocks = <&prci PRCI_CLK_PCLK>;
+                       reg-shift = <2>;
+                       reg-io-width = <1>;
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       status = "disabled";
+               };
+               i2c1: i2c at 10031000 {
+                       compatible = "sifive,fu740-c000-i2c", "sifive,i2c0";
+                       reg = <0x0 0x10031000 0x0 0x1000>;
+                       interrupt-parent = <&plic0>;
+                       interrupts = <53>;
+                       clocks = <&prci PRCI_CLK_PCLK>;
+                       reg-shift = <2>;
+                       reg-io-width = <1>;
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       status = "disabled";
+               };
+               qspi0: spi at 10040000 {
+                       compatible = "sifive,fu740-c000-spi", "sifive,spi0";
+                       reg = <0x0 0x10040000 0x0 0x1000
+                              0x0 0x20000000 0x0 0x10000000>;
+                       interrupt-parent = <&plic0>;
+                       interrupts = <41>;
+                       clocks = <&prci PRCI_CLK_PCLK>;
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       status = "disabled";
+               };
+               qspi1: spi at 10041000 {
+                       compatible = "sifive,fu740-c000-spi", "sifive,spi0";
+                       reg = <0x0 0x10041000 0x0 0x1000
+                              0x0 0x30000000 0x0 0x10000000>;
+                       interrupt-parent = <&plic0>;
+                       interrupts = <42>;
+                       clocks = <&prci PRCI_CLK_PCLK>;
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       status = "disabled";
+               };
+               spi0: spi at 10050000 {
+                       compatible = "sifive,fu740-c000-spi", "sifive,spi0";
+                       reg = <0x0 0x10050000 0x0 0x1000>;
+                       interrupt-parent = <&plic0>;
+                       interrupts = <43>;
+                       clocks = <&prci PRCI_CLK_PCLK>;
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       status = "disabled";
+               };
+               eth0: ethernet at 10090000 {
+                       compatible = "sifive,fu740-c000-gem";
+                       interrupt-parent = <&plic0>;
+                       interrupts = <55>;
+                       reg = <0x0 0x10090000 0x0 0x2000
+                              0x0 0x100a0000 0x0 0x1000>;
+                       local-mac-address = [00 00 00 00 00 00];
+                       clock-names = "pclk", "hclk";
+                       clocks = <&prci PRCI_CLK_GEMGXLPLL>,
+                                <&prci PRCI_CLK_GEMGXLPLL>;
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       status = "disabled";
+               };
+               pwm0: pwm at 10020000 {
+                       compatible = "sifive,fu740-c000-pwm", "sifive,pwm0";
+                       reg = <0x0 0x10020000 0x0 0x1000>;
+                       interrupt-parent = <&plic0>;
+                       interrupts = <44 45 46 47>;
+                       clocks = <&prci PRCI_CLK_PCLK>;
+                       #pwm-cells = <3>;
+                       status = "disabled";
+               };
+               pwm1: pwm at 10021000 {
+                       compatible = "sifive,fu740-c000-pwm", "sifive,pwm0";
+                       reg = <0x0 0x10021000 0x0 0x1000>;
+                       interrupt-parent = <&plic0>;
+                       interrupts = <48 49 50 51>;
+                       clocks = <&prci PRCI_CLK_PCLK>;
+                       #pwm-cells = <3>;
+                       status = "disabled";
+               };
+               ccache: cache-controller at 2010000 {
+                       compatible = "sifive,fu740-c000-ccache", "cache";
+                       cache-block-size = <64>;
+                       cache-level = <2>;
+                       cache-sets = <2048>;
+                       cache-size = <2097152>;
+                       cache-unified;
+                       interrupt-parent = <&plic0>;
+                       interrupts = <19 21 22 20>;
+                       reg = <0x0 0x2010000 0x0 0x1000>;
+               };
+               gpio: gpio at 10060000 {
+                       compatible = "sifive,fu740-c000-gpio", "sifive,gpio0";
+                       interrupt-parent = <&plic0>;
+                       interrupts = <23>, <24>, <25>, <26>, <27>, <28>, <29>,
+                                    <30>, <31>, <32>, <33>, <34>, <35>, <36>,
+                                    <37>, <38>;
+                       reg = <0x0 0x10060000 0x0 0x1000>;
+                       gpio-controller;
+                       #gpio-cells = <2>;
+                       interrupt-controller;
+                       #interrupt-cells = <2>;
+                       clocks = <&prci PRCI_CLK_PCLK>;
+                       status = "disabled";
+               };
+               pcie at e00000000 {
+                       #address-cells = <3>;
+                       #interrupt-cells = <1>;
+                       #num-lanes = <8>;
+                       #size-cells = <2>;
+                       compatible = "sifive,fu740-pcie";
+                       reg = <0xe 0x00000000 0x1 0x0
+                              0xd 0xf0000000 0x0 0x10000000
+                              0x0 0x100d0000 0x0 0x1000>;
+                       reg-names = "dbi", "config", "mgmt";
+                       device_type = "pci";
+                       dma-coherent;
+                       bus-range = <0x0 0xff>;
+                       ranges = <0x81000000  0x0 0x60080000  0x0 0x60080000 0x0 0x10000
+                                 0x82000000  0x0 0x60090000  0x0 0x60090000 0x0 0xff70000
+                                 0x82000000  0x0 0x70000000  0x0 0x70000000 0x0 0x1000000
+                                 0xc3000000 0x20 0x00000000 0x20 0x00000000 0x20 0x00000000>;
+                       num-lanes = <0x8>;
+                       interrupts = <56 57 58 59 60 61 62 63 64>;
+                       interrupt-names = "msi", "inta", "intb", "intc", "intd";
+                       interrupt-parent = <&plic0>;
+                       interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+                       interrupt-map = <0x0 0x0 0x0 0x1 &plic0 57>,
+                                       <0x0 0x0 0x0 0x2 &plic0 58>,
+                                       <0x0 0x0 0x0 0x3 &plic0 59>,
+                                       <0x0 0x0 0x0 0x4 &plic0 60>;
+                       pwren-gpios = <&gpio 5 0>;
+                       perstn-gpios = <&gpio 8 0>;
+                       clocks = <&prci PRCI_CLK_PCIEAUX>;
+                       clock-names = "pcieaux";
+                       resets = <&prci PRCI_RST_PCIE_POWER_UP_N>;
+                       reset-names = "rst_n";
+
+                       status = "okay";
+               };
+       };
+};
include/dt-bindings/clock/sifive-fu740-prci.h new file +25 -0
new file mode 100644
index 0000000000..c1224783c0
@@ -0,0 +1,25 @@
+/* SPDX-License-Identifier: GPL-2.0 OR MIT */
+/*
+ * Copyright (C) 2020-2021 SiFive, Inc.
+ * Wesley Terpstra
+ * Paul Walmsley
+ * Zong Li
+ * Pragnesh Patel
+ */
+
+#ifndef __DT_BINDINGS_CLOCK_SIFIVE_FU740_PRCI_H
+#define __DT_BINDINGS_CLOCK_SIFIVE_FU740_PRCI_H
+
+/* Clock indexes for use by Device Tree data and the PRCI driver */
+
+#define PRCI_CLK_COREPLL       0
+#define PRCI_CLK_DDRPLL                1
+#define PRCI_CLK_GEMGXLPLL     2
+#define PRCI_CLK_DVFSCOREPLL   3
+#define PRCI_CLK_HFPCLKPLL     4
+#define PRCI_CLK_CLTXPLL       5
+#define PRCI_CLK_TLCLK         6
+#define PRCI_CLK_PCLK          7
+#define PRCI_CLK_PCIEAUX       8
+
+#endif
include/dt-bindings/reset/sifive-fu740-prci.h new file +19 -1
new file mode 100644
index 0000000000..02210f4105
@@ -0,0 +1,19 @@
+/* SPDX-License-Identifier: GPL-2.0 OR MIT */
+/*
+ * Copyright (C) 2020-2021 Sifive, Inc.
+ * Author: Pragnesh Patel <[email protected]>
+ */
+
+#ifndef __DT_BINDINGS_RESET_SIFIVE_FU740_PRCI_H
+#define __DT_BINDINGS_RESET_SIFIVE_FU740_PRCI_H
+
+/* Reset indexes for use by device tree data and the PRCI driver */
+#define PRCI_RST_DDR_CTRL_N            0
+#define PRCI_RST_DDR_AXI_N             1
+#define PRCI_RST_DDR_AHB_N             2
+#define PRCI_RST_DDR_PHY_N             3
+#define PRCI_RST_PCIE_POWER_UP_N       4
+#define PRCI_RST_GEMGXL_N              5
+#define PRCI_RST_CLTX_N                        6
+
+#endif
--

2.31.0

author
#6 lore raw

PATCH v6 1/7 riscv: dts: add fu740 support

Quoted 57 lines · Rick Chen

Hi Green

Quoted 54 lines · Rick Chen
Quoted 40 lines

Hi Green,

Quoted 29 lines

From: Green Wan [mailto:green.wan at sifive.com]
Sent: Thursday, April 08, 2021 9:40 PM
Cc: bmeng.cn at gmail.com; Green Wan; Greentime Hu; Rick Jian-Zhi Chen(???); Paul Walmsley; Palmer Dabbelt; Anup Patel; Atish Patra; Pragnesh Patel; Lukasz Majewski; Joe Hershberger; Ramon Fried; u-boot at lists.denx.de
Subject: [PATCH v6 1/7] riscv: dts: add fu740 support

Add dts support for fu740. The HiFive Unmatched support is based on fu740 cpu and drivers in following patch set.

[greentime.hu: set fu740 speed to 1.2GHz]
---
 arch/riscv/dts/Makefile                       |   1 +
 arch/riscv/dts/fu740-c000-u-boot.dtsi         | 105 ++++++
 arch/riscv/dts/fu740-c000.dtsi                | 329 ++++++++++++++++++
 include/dt-bindings/clock/sifive-fu740-prci.h |  25 ++
 include/dt-bindings/reset/sifive-fu740-prci.h |  19 +
 5 files changed, 479 insertions(+)
 create mode 100644 arch/riscv/dts/fu740-c000-u-boot.dtsi
 create mode 100644 arch/riscv/dts/fu740-c000.dtsi
 create mode 100644 include/dt-bindings/clock/sifive-fu740-prci.h
 create mode 100644 include/dt-bindings/reset/sifive-fu740-prci.h
arch/riscv/dts/Makefile +0 -0
index 8138d89d84..ed32f56c9e 100644

arch/riscv/dts/Makefile line 5

Quoted 4 lines
arch/riscv/dts/Makefile +1 -0
@@ -2,6 +2,7 @@
 
 dtb-$(CONFIG_TARGET_AX25_AE350) += ae350_32.dtb ae350_64.dtb
 dtb-$(CONFIG_TARGET_SIFIVE_UNLEASHED) += hifive-unleashed-a00.dtb
+dtb-$(CONFIG_TARGET_SIFIVE_UNMATCHED) += hifive-unmatched-a00.dtb

Makefile need the dts file, but it is not exist in this patch. It doesn't make sense.

Quoted 3 lines

Maybe you can combine with the dts relative files in [PATCH v6 6/7] into one patch and name as :
riscv: dts: ...

Hi Rick,

Thanks for review.

How about move change of arch/riscv/dts/Makefile to [PATCH v6 6/7] since it's more like a board dependent change. This patch [1/7] is pure for fu740 dts review. I'd like to keep one for fu740 dts and the rest dts for unmatched board.

Quoted 7 lines
Quoted 1 line

What do you think of it?

It is OK.

You may arrange them nearby as below:
6/x riscv: dts: support fu740
7/x riscv: dst: support HiFive Unmatched board

Thanks for confirmation. I can do it. Originally, I want to keep fu740 dts in front of CPU and drivers patch. That means they will be in front of fu740 dts in v7 patch. Hope it's fine for upstream.

-- Green

Quoted 522 lines

Thanks,
Rick

Quoted 518 lines

Thanks,
-
Green

Quoted 513 lines

LGTM.
Other than that,

Quoted 507 lines
arch/riscv/dts/Makefile +0 -0
 dtb-$(CONFIG_TARGET_SIPEED_MAIX) += k210-maix-bit.dtb
 dtb-$(CONFIG_TARGET_MICROCHIP_ICICLE) += microchip-mpfs-icicle-kit.dtb
 
arch/riscv/dts/fu740-c000-u-boot.dtsi new file +105 -0
new file mode 100644
index 0000000000..a5d0688b06
@@ -0,0 +1,105 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * (C) Copyright 2020-2021 SiFive, Inc
+ */
+
+#include <dt-bindings/reset/sifive-fu740-prci.h>
+
+/ {
+       cpus {
+               assigned-clocks = <&prci PRCI_CLK_COREPLL>;
+               assigned-clock-rates = <1200000000>;
+               u-boot,dm-spl;
+               cpu0: cpu at 0 {
+                       clocks = <&prci PRCI_CLK_COREPLL>;
+                       u-boot,dm-spl;
+                       status = "okay";
+                       cpu0_intc: interrupt-controller {
+                               u-boot,dm-spl;
+                       };
+               };
+               cpu1: cpu at 1 {
+                       clocks = <&prci PRCI_CLK_COREPLL>;
+                       u-boot,dm-spl;
+                       cpu1_intc: interrupt-controller {
+                               u-boot,dm-spl;
+                       };
+               };
+               cpu2: cpu at 2 {
+                       clocks = <&prci PRCI_CLK_COREPLL>;
+                       u-boot,dm-spl;
+                       cpu2_intc: interrupt-controller {
+                                u-boot,dm-spl;
+                       };
+               };
+               cpu3: cpu at 3 {
+                       clocks = <&prci PRCI_CLK_COREPLL>;
+                       u-boot,dm-spl;
+                       cpu3_intc: interrupt-controller {
+                               u-boot,dm-spl;
+                       };
+               };
+               cpu4: cpu at 4 {
+                       clocks = <&prci PRCI_CLK_COREPLL>;
+                       u-boot,dm-spl;
+                       cpu4_intc: interrupt-controller {
+                               u-boot,dm-spl;
+                       };
+               };
+       };
+
+       soc {
+               u-boot,dm-spl;
+               clint: clint at 2000000 {
+                       compatible = "riscv,clint0";
+                       interrupts-extended = <&cpu0_intc 3 &cpu0_intc 7
+                                              &cpu1_intc 3 &cpu1_intc 7
+                                              &cpu2_intc 3 &cpu2_intc 7
+                                              &cpu3_intc 3 &cpu3_intc 7
+                                              &cpu4_intc 3 &cpu4_intc 7>;
+                       reg = <0x0 0x2000000 0x0 0x10000>;
+                       u-boot,dm-spl;
+               };
+               prci: clock-controller at 10000000 {
+                       #reset-cells = <1>;
+                       resets = <&prci PRCI_RST_DDR_CTRL_N>,
+                                <&prci PRCI_RST_DDR_AXI_N>,
+                                <&prci PRCI_RST_DDR_AHB_N>,
+                                <&prci PRCI_RST_DDR_PHY_N>,
+                                <&prci PRCI_RST_GEMGXL_N>,
+                                <&prci PRCI_RST_CLTX_N>;
+                       reset-names = "ddr_ctrl", "ddr_axi", "ddr_ahb",
+                                       "ddr_phy", "gemgxl_reset", "cltx_reset";
+               };
+               dmc: dmc at 100b0000 {
+                       compatible = "sifive,fu740-c000-ddr";
+                       reg = <0x0 0x100b0000 0x0 0x0800
+                              0x0 0x100b2000 0x0 0x2000
+                              0x0 0x100b8000 0x0 0x1000>;
+                       clocks = <&prci PRCI_CLK_DDRPLL>;
+                       clock-frequency = <933333324>;
+                       u-boot,dm-spl;
+               };
+       };
+};
+
+&prci {
+       u-boot,dm-spl;
+};
+
+&uart0 {
+       u-boot,dm-spl;
+};
+
+&spi0 {
+       u-boot,dm-spl;
+};
+
+&eth0 {
+       assigned-clocks = <&prci PRCI_CLK_GEMGXLPLL>;
+       assigned-clock-rates = <125125000>;
+};
+
+&ccache {
+       status = "okay";
+};
arch/riscv/dts/fu740-c000.dtsi new file +329 -0
new file mode 100644
index 0000000000..0325e51e39
@@ -0,0 +1,329 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/* Copyright (c) 2020-2021 SiFive, Inc */
+
+/dts-v1/;
+
+#include <dt-bindings/clock/sifive-fu740-prci.h>
+#include <dt-bindings/reset/sifive-fu740-prci.h>
+
+/ {
+       #address-cells = <2>;
+       #size-cells = <2>;
+       compatible = "sifive,fu740-c000", "sifive,fu740";
+
+       aliases {
+               serial0 = &uart0;
+               serial1 = &uart1;
+               ethernet0 = &eth0;
+       };
+
+       chosen {
+       };
+
+       cpus {
+               #address-cells = <1>;
+               #size-cells = <0>;
+               cpu0: cpu at 0 {
+                       compatible = "sifive,bullet0", "riscv";
+                       device_type = "cpu";
+                       i-cache-block-size = <64>;
+                       i-cache-sets = <128>;
+                       i-cache-size = <16384>;
+                       next-level-cache = <&ccache>;
+                       reg = <0x0>;
+                       riscv,isa = "rv64imac";
+                       status = "disabled";
+                       cpu0_intc: interrupt-controller {
+                               #interrupt-cells = <1>;
+                               compatible = "riscv,cpu-intc";
+                               interrupt-controller;
+                       };
+               };
+               cpu1: cpu at 1 {
+                       compatible = "sifive,bullet0", "riscv";
+                       d-cache-block-size = <64>;
+                       d-cache-sets = <64>;
+                       d-cache-size = <32768>;
+                       d-tlb-sets = <1>;
+                       d-tlb-size = <40>;
+                       device_type = "cpu";
+                       i-cache-block-size = <64>;
+                       i-cache-sets = <128>;
+                       i-cache-size = <32768>;
+                       i-tlb-sets = <1>;
+                       i-tlb-size = <40>;
+                       mmu-type = "riscv,sv39";
+                       next-level-cache = <&ccache>;
+                       reg = <0x1>;
+                       riscv,isa = "rv64imafdc";
+                       tlb-split;
+                       cpu1_intc: interrupt-controller {
+                               #interrupt-cells = <1>;
+                               compatible = "riscv,cpu-intc";
+                               interrupt-controller;
+                       };
+               };
+               cpu2: cpu at 2 {
+                       compatible = "sifive,bullet0", "riscv";
+                       d-cache-block-size = <64>;
+                       d-cache-sets = <64>;
+                       d-cache-size = <32768>;
+                       d-tlb-sets = <1>;
+                       d-tlb-size = <40>;
+                       device_type = "cpu";
+                       i-cache-block-size = <64>;
+                       i-cache-sets = <128>;
+                       i-cache-size = <32768>;
+                       i-tlb-sets = <1>;
+                       i-tlb-size = <40>;
+                       mmu-type = "riscv,sv39";
+                       next-level-cache = <&ccache>;
+                       reg = <0x2>;
+                       riscv,isa = "rv64imafdc";
+                       tlb-split;
+                       cpu2_intc: interrupt-controller {
+                               #interrupt-cells = <1>;
+                               compatible = "riscv,cpu-intc";
+                               interrupt-controller;
+                       };
+               };
+               cpu3: cpu at 3 {
+                       compatible = "sifive,bullet0", "riscv";
+                       d-cache-block-size = <64>;
+                       d-cache-sets = <64>;
+                       d-cache-size = <32768>;
+                       d-tlb-sets = <1>;
+                       d-tlb-size = <40>;
+                       device_type = "cpu";
+                       i-cache-block-size = <64>;
+                       i-cache-sets = <128>;
+                       i-cache-size = <32768>;
+                       i-tlb-sets = <1>;
+                       i-tlb-size = <40>;
+                       mmu-type = "riscv,sv39";
+                       next-level-cache = <&ccache>;
+                       reg = <0x3>;
+                       riscv,isa = "rv64imafdc";
+                       tlb-split;
+                       cpu3_intc: interrupt-controller {
+                               #interrupt-cells = <1>;
+                               compatible = "riscv,cpu-intc";
+                               interrupt-controller;
+                       };
+               };
+               cpu4: cpu at 4 {
+                       compatible = "sifive,bullet0", "riscv";
+                       d-cache-block-size = <64>;
+                       d-cache-sets = <64>;
+                       d-cache-size = <32768>;
+                       d-tlb-sets = <1>;
+                       d-tlb-size = <40>;
+                       device_type = "cpu";
+                       i-cache-block-size = <64>;
+                       i-cache-sets = <128>;
+                       i-cache-size = <32768>;
+                       i-tlb-sets = <1>;
+                       i-tlb-size = <40>;
+                       mmu-type = "riscv,sv39";
+                       next-level-cache = <&ccache>;
+                       reg = <0x4>;
+                       riscv,isa = "rv64imafdc";
+                       tlb-split;
+                       cpu4_intc: interrupt-controller {
+                               #interrupt-cells = <1>;
+                               compatible = "riscv,cpu-intc";
+                               interrupt-controller;
+                       };
+               };
+       };
+       soc {
+               #address-cells = <2>;
+               #size-cells = <2>;
+               compatible = "sifive,fu740-c000", "sifive,fu740", "simple-bus";
+               ranges;
+               plic0: interrupt-controller at c000000 {
+                       #interrupt-cells = <1>;
+                       compatible = "sifive,plic-1.0.0";
+                       reg = <0x0 0xc000000 0x0 0x4000000>;
+                       riscv,ndev = <69>;
+                       interrupt-controller;
+                       interrupts-extended = <
+                               &cpu0_intc 0xffffffff
+                               &cpu1_intc 0xffffffff &cpu1_intc 9
+                               &cpu2_intc 0xffffffff &cpu2_intc 9
+                               &cpu3_intc 0xffffffff &cpu3_intc 9
+                               &cpu4_intc 0xffffffff &cpu4_intc 9>;
+               };
+               prci: clock-controller at 10000000 {
+                       compatible = "sifive,fu740-c000-prci";
+                       reg = <0x0 0x10000000 0x0 0x1000>;
+                       clocks = <&hfclk>, <&rtcclk>;
+                       #clock-cells = <1>;
+                       #reset-cells = <1>;
+               };
+               uart0: serial at 10010000 {
+                       compatible = "sifive,fu740-c000-uart", "sifive,uart0";
+                       reg = <0x0 0x10010000 0x0 0x1000>;
+                       interrupt-parent = <&plic0>;
+                       interrupts = <39>;
+                       clocks = <&prci PRCI_CLK_PCLK>;
+                       status = "disabled";
+               };
+               uart1: serial at 10011000 {
+                       compatible = "sifive,fu740-c000-uart", "sifive,uart0";
+                       reg = <0x0 0x10011000 0x0 0x1000>;
+                       interrupt-parent = <&plic0>;
+                       interrupts = <40>;
+                       clocks = <&prci PRCI_CLK_PCLK>;
+                       status = "disabled";
+               };
+               i2c0: i2c at 10030000 {
+                       compatible = "sifive,fu740-c000-i2c", "sifive,i2c0";
+                       reg = <0x0 0x10030000 0x0 0x1000>;
+                       interrupt-parent = <&plic0>;
+                       interrupts = <52>;
+                       clocks = <&prci PRCI_CLK_PCLK>;
+                       reg-shift = <2>;
+                       reg-io-width = <1>;
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       status = "disabled";
+               };
+               i2c1: i2c at 10031000 {
+                       compatible = "sifive,fu740-c000-i2c", "sifive,i2c0";
+                       reg = <0x0 0x10031000 0x0 0x1000>;
+                       interrupt-parent = <&plic0>;
+                       interrupts = <53>;
+                       clocks = <&prci PRCI_CLK_PCLK>;
+                       reg-shift = <2>;
+                       reg-io-width = <1>;
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       status = "disabled";
+               };
+               qspi0: spi at 10040000 {
+                       compatible = "sifive,fu740-c000-spi", "sifive,spi0";
+                       reg = <0x0 0x10040000 0x0 0x1000
+                              0x0 0x20000000 0x0 0x10000000>;
+                       interrupt-parent = <&plic0>;
+                       interrupts = <41>;
+                       clocks = <&prci PRCI_CLK_PCLK>;
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       status = "disabled";
+               };
+               qspi1: spi at 10041000 {
+                       compatible = "sifive,fu740-c000-spi", "sifive,spi0";
+                       reg = <0x0 0x10041000 0x0 0x1000
+                              0x0 0x30000000 0x0 0x10000000>;
+                       interrupt-parent = <&plic0>;
+                       interrupts = <42>;
+                       clocks = <&prci PRCI_CLK_PCLK>;
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       status = "disabled";
+               };
+               spi0: spi at 10050000 {
+                       compatible = "sifive,fu740-c000-spi", "sifive,spi0";
+                       reg = <0x0 0x10050000 0x0 0x1000>;
+                       interrupt-parent = <&plic0>;
+                       interrupts = <43>;
+                       clocks = <&prci PRCI_CLK_PCLK>;
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       status = "disabled";
+               };
+               eth0: ethernet at 10090000 {
+                       compatible = "sifive,fu740-c000-gem";
+                       interrupt-parent = <&plic0>;
+                       interrupts = <55>;
+                       reg = <0x0 0x10090000 0x0 0x2000
+                              0x0 0x100a0000 0x0 0x1000>;
+                       local-mac-address = [00 00 00 00 00 00];
+                       clock-names = "pclk", "hclk";
+                       clocks = <&prci PRCI_CLK_GEMGXLPLL>,
+                                <&prci PRCI_CLK_GEMGXLPLL>;
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       status = "disabled";
+               };
+               pwm0: pwm at 10020000 {
+                       compatible = "sifive,fu740-c000-pwm", "sifive,pwm0";
+                       reg = <0x0 0x10020000 0x0 0x1000>;
+                       interrupt-parent = <&plic0>;
+                       interrupts = <44 45 46 47>;
+                       clocks = <&prci PRCI_CLK_PCLK>;
+                       #pwm-cells = <3>;
+                       status = "disabled";
+               };
+               pwm1: pwm at 10021000 {
+                       compatible = "sifive,fu740-c000-pwm", "sifive,pwm0";
+                       reg = <0x0 0x10021000 0x0 0x1000>;
+                       interrupt-parent = <&plic0>;
+                       interrupts = <48 49 50 51>;
+                       clocks = <&prci PRCI_CLK_PCLK>;
+                       #pwm-cells = <3>;
+                       status = "disabled";
+               };
+               ccache: cache-controller at 2010000 {
+                       compatible = "sifive,fu740-c000-ccache", "cache";
+                       cache-block-size = <64>;
+                       cache-level = <2>;
+                       cache-sets = <2048>;
+                       cache-size = <2097152>;
+                       cache-unified;
+                       interrupt-parent = <&plic0>;
+                       interrupts = <19 21 22 20>;
+                       reg = <0x0 0x2010000 0x0 0x1000>;
+               };
+               gpio: gpio at 10060000 {
+                       compatible = "sifive,fu740-c000-gpio", "sifive,gpio0";
+                       interrupt-parent = <&plic0>;
+                       interrupts = <23>, <24>, <25>, <26>, <27>, <28>, <29>,
+                                    <30>, <31>, <32>, <33>, <34>, <35>, <36>,
+                                    <37>, <38>;
+                       reg = <0x0 0x10060000 0x0 0x1000>;
+                       gpio-controller;
+                       #gpio-cells = <2>;
+                       interrupt-controller;
+                       #interrupt-cells = <2>;
+                       clocks = <&prci PRCI_CLK_PCLK>;
+                       status = "disabled";
+               };
+               pcie at e00000000 {
+                       #address-cells = <3>;
+                       #interrupt-cells = <1>;
+                       #num-lanes = <8>;
+                       #size-cells = <2>;
+                       compatible = "sifive,fu740-pcie";
+                       reg = <0xe 0x00000000 0x1 0x0
+                              0xd 0xf0000000 0x0 0x10000000
+                              0x0 0x100d0000 0x0 0x1000>;
+                       reg-names = "dbi", "config", "mgmt";
+                       device_type = "pci";
+                       dma-coherent;
+                       bus-range = <0x0 0xff>;
+                       ranges = <0x81000000  0x0 0x60080000  0x0 0x60080000 0x0 0x10000
+                                 0x82000000  0x0 0x60090000  0x0 0x60090000 0x0 0xff70000
+                                 0x82000000  0x0 0x70000000  0x0 0x70000000 0x0 0x1000000
+                                 0xc3000000 0x20 0x00000000 0x20 0x00000000 0x20 0x00000000>;
+                       num-lanes = <0x8>;
+                       interrupts = <56 57 58 59 60 61 62 63 64>;
+                       interrupt-names = "msi", "inta", "intb", "intc", "intd";
+                       interrupt-parent = <&plic0>;
+                       interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+                       interrupt-map = <0x0 0x0 0x0 0x1 &plic0 57>,
+                                       <0x0 0x0 0x0 0x2 &plic0 58>,
+                                       <0x0 0x0 0x0 0x3 &plic0 59>,
+                                       <0x0 0x0 0x0 0x4 &plic0 60>;
+                       pwren-gpios = <&gpio 5 0>;
+                       perstn-gpios = <&gpio 8 0>;
+                       clocks = <&prci PRCI_CLK_PCIEAUX>;
+                       clock-names = "pcieaux";
+                       resets = <&prci PRCI_RST_PCIE_POWER_UP_N>;
+                       reset-names = "rst_n";
+
+                       status = "okay";
+               };
+       };
+};
include/dt-bindings/clock/sifive-fu740-prci.h new file +25 -0
new file mode 100644
index 0000000000..c1224783c0
@@ -0,0 +1,25 @@
+/* SPDX-License-Identifier: GPL-2.0 OR MIT */
+/*
+ * Copyright (C) 2020-2021 SiFive, Inc.
+ * Wesley Terpstra
+ * Paul Walmsley
+ * Zong Li
+ * Pragnesh Patel
+ */
+
+#ifndef __DT_BINDINGS_CLOCK_SIFIVE_FU740_PRCI_H
+#define __DT_BINDINGS_CLOCK_SIFIVE_FU740_PRCI_H
+
+/* Clock indexes for use by Device Tree data and the PRCI driver */
+
+#define PRCI_CLK_COREPLL       0
+#define PRCI_CLK_DDRPLL                1
+#define PRCI_CLK_GEMGXLPLL     2
+#define PRCI_CLK_DVFSCOREPLL   3
+#define PRCI_CLK_HFPCLKPLL     4
+#define PRCI_CLK_CLTXPLL       5
+#define PRCI_CLK_TLCLK         6
+#define PRCI_CLK_PCLK          7
+#define PRCI_CLK_PCIEAUX       8
+
+#endif
include/dt-bindings/reset/sifive-fu740-prci.h new file +19 -1
new file mode 100644
index 0000000000..02210f4105
@@ -0,0 +1,19 @@
+/* SPDX-License-Identifier: GPL-2.0 OR MIT */
+/*
+ * Copyright (C) 2020-2021 Sifive, Inc.
+ * Author: Pragnesh Patel <[email protected]>
+ */
+
+#ifndef __DT_BINDINGS_RESET_SIFIVE_FU740_PRCI_H
+#define __DT_BINDINGS_RESET_SIFIVE_FU740_PRCI_H
+
+/* Reset indexes for use by device tree data and the PRCI driver */
+#define PRCI_RST_DDR_CTRL_N            0
+#define PRCI_RST_DDR_AXI_N             1
+#define PRCI_RST_DDR_AHB_N             2
+#define PRCI_RST_DDR_PHY_N             3
+#define PRCI_RST_PCIE_POWER_UP_N       4
+#define PRCI_RST_GEMGXL_N              5
+#define PRCI_RST_CLTX_N                        6
+
+#endif
--

2.31.0

author
#7 lore raw

PATCH v6 2/7 riscv: cpu: fu740: Add support for cpu fu740

In reply to Green Wan

Add SiFive fu740 cpu to support RISC-V arch

---
 arch/riscv/Kconfig                        |  1 +
 arch/riscv/cpu/fu740/Kconfig              | 37 +++++++++++++++
 arch/riscv/cpu/fu740/Makefile             | 12 +++++
 arch/riscv/cpu/fu740/cache.c              | 55 +++++++++++++++++++++++
 arch/riscv/cpu/fu740/cpu.c                | 22 +++++++++
 arch/riscv/cpu/fu740/dram.c               | 38 ++++++++++++++++
 arch/riscv/cpu/fu740/spl.c                | 23 ++++++++++
 arch/riscv/include/asm/arch-fu740/cache.h | 14 ++++++
 arch/riscv/include/asm/arch-fu740/clk.h   | 14 ++++++
 arch/riscv/include/asm/arch-fu740/gpio.h  | 38 ++++++++++++++++
 arch/riscv/include/asm/arch-fu740/reset.h | 13 ++++++
 arch/riscv/include/asm/arch-fu740/spl.h   | 14 ++++++
 arch/riscv/lib/sifive_clint.c             |  1 -
 13 files changed, 281 insertions(+), 1 deletion(-)
 create mode 100644 arch/riscv/cpu/fu740/Kconfig
 create mode 100644 arch/riscv/cpu/fu740/Makefile
 create mode 100644 arch/riscv/cpu/fu740/cache.c
 create mode 100644 arch/riscv/cpu/fu740/cpu.c
 create mode 100644 arch/riscv/cpu/fu740/dram.c
 create mode 100644 arch/riscv/cpu/fu740/spl.c
 create mode 100644 arch/riscv/include/asm/arch-fu740/cache.h
 create mode 100644 arch/riscv/include/asm/arch-fu740/clk.h
 create mode 100644 arch/riscv/include/asm/arch-fu740/gpio.h
 create mode 100644 arch/riscv/include/asm/arch-fu740/reset.h
 create mode 100644 arch/riscv/include/asm/arch-fu740/spl.h
arch/riscv/Kconfig +1 -0
index e8494c2a49..323c3587ae 100644
@@ -61,6 +61,7 @@ source "board/sipeed/maix/Kconfig"
 # platform-specific options below
 source "arch/riscv/cpu/ax25/Kconfig"
 source "arch/riscv/cpu/fu540/Kconfig"
+source "arch/riscv/cpu/fu740/Kconfig"
 source "arch/riscv/cpu/generic/Kconfig"
 
 # architecture-specific options below
arch/riscv/cpu/fu740/Kconfig new file +37 -0
new file mode 100644
index 0000000000..689e54d569
@@ -0,0 +1,37 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Copyright (C) 2020-2021 SiFive, Inc
+# Pragnesh Patel <[email protected]>
+
+config SIFIVE_FU740
+	bool
+	select ARCH_EARLY_INIT_R
+	select RAM
+	select SPL_RAM if SPL
+	imply CPU
+	imply CPU_RISCV
+	imply RISCV_TIMER if (RISCV_SMODE || SPL_RISCV_SMODE)
+	imply SIFIVE_CLINT if (RISCV_MMODE || SPL_RISCV_MMODE)
+	imply CMD_CPU
+	imply SPL_CPU_SUPPORT
+	imply SPL_OPENSBI
+	imply SPL_LOAD_FIT
+	imply SMP
+	imply CLK_SIFIVE
+	imply CLK_SIFIVE_PRCI
+	imply SIFIVE_SERIAL
+	imply MACB
+	imply MII
+	imply SPI
+	imply SPI_SIFIVE
+	imply MMC
+	imply MMC_SPI
+	imply MMC_BROKEN_CD
+	imply CMD_MMC
+	imply DM_GPIO
+	imply SIFIVE_GPIO
+	imply CMD_GPIO
+	imply MISC
+	imply SIFIVE_OTP
+	imply DM_PWM
+	imply PWM_SIFIVE
arch/riscv/cpu/fu740/Makefile new file +12 -0
new file mode 100644
index 0000000000..5ef8ac18a7
@@ -0,0 +1,12 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Copyright (C) 2020-2021 SiFive, Inc
+# Pragnesh Patel <[email protected]>
+
+ifeq ($(CONFIG_SPL_BUILD),y)
+obj-y += spl.o
+else
+obj-y += dram.o
+obj-y += cpu.o
+obj-y += cache.o
+endif
arch/riscv/cpu/fu740/cache.c new file +55 -0

55 lines not on this page · raw message

arch/riscv/cpu/fu740/cpu.c new file +22 -0
new file mode 100644
index 0000000000..f13c18942f
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018, Bin Meng <[email protected]>
+ */
+
+#include <irq_func.h>
+#include <asm/cache.h>
+
+/*
+ * cleanup_before_linux() is called just before we call linux
+ * it prepares the processor for linux
+ *
+ * we disable interrupt and caches.
+ */
+int cleanup_before_linux(void)
+{
+	disable_interrupts();
+
+	cache_flush();
+
+	return 0;
+}
arch/riscv/cpu/fu740/dram.c new file +38 -0
new file mode 100644
index 0000000000..1dc77efeca
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018, Bin Meng <[email protected]>
+ */
+
+#include <common.h>
+#include <fdtdec.h>
+#include <init.h>
+#include <linux/sizes.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int dram_init(void)
+{
+	return fdtdec_setup_mem_size_base();
+}
+
+int dram_init_banksize(void)
+{
+	return fdtdec_setup_memory_banksize();
+}
+
+ulong board_get_usable_ram_top(ulong total_size)
+{
+#ifdef CONFIG_64BIT
+	/*
+	 * Ensure that we run from first 4GB so that all
+	 * addresses used by U-Boot are 32bit addresses.
+	 *
+	 * This in-turn ensures that 32bit DMA capable
+	 * devices work fine because DMA mapping APIs will
+	 * provide 32bit DMA addresses only.
+	 */
+	if (gd->ram_top > SZ_4G)
+		return SZ_4G;
+#endif
+	return gd->ram_top;
+}
arch/riscv/cpu/fu740/spl.c new file +23 -0
new file mode 100644
index 0000000000..ea0b2283a2
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2020-201 SiFive, Inc
+ * Pragnesh Patel <[email protected]>
+ */
+
+#include <dm.h>
+#include <log.h>
+
+int spl_soc_init(void)
+{
+	int ret;
+	struct udevice *dev;
+
+	/* DDR init */
+	ret = uclass_get_device(UCLASS_RAM, 0, &dev);
+	if (ret) {
+		debug("DRAM init failed: %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
arch/riscv/include/asm/arch-fu740/cache.h new file +14 -0
new file mode 100644
index 0000000000..7d4fe9942b
@@ -0,0 +1,14 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2020-2021 SiFive, Inc.
+ *
+ * Authors:
+ *   Pragnesh Patel <[email protected]>
+ */
+
+#ifndef _CACHE_SIFIVE_H
+#define _CACHE_SIFIVE_H
+
+int cache_enable_ways(void);
+
+#endif /* _CACHE_SIFIVE_H */
arch/riscv/include/asm/arch-fu740/clk.h new file +14 -0
new file mode 100644
index 0000000000..9f883616b2
@@ -0,0 +1,14 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (c) 2020-2021 SiFive Inc
+ *
+ * Authors:
+ *   Pragnesh Patel <[email protected]>
+ */
+
+#ifndef __CLK_SIFIVE_H
+#define __CLK_SIFIVE_H
+
+/* Note: This is a placeholder header for driver compilation. */
+
+#endif
arch/riscv/include/asm/arch-fu740/gpio.h new file +38 -0
new file mode 100644
index 0000000000..908e2e5563
@@ -0,0 +1,38 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2020-2021 SiFive, Inc.
+ */
+
+#ifndef _GPIO_SIFIVE_H
+#define _GPIO_SIFIVE_H
+
+#define GPIO_INPUT_VAL	0x00
+#define GPIO_INPUT_EN	0x04
+#define GPIO_OUTPUT_EN	0x08
+#define GPIO_OUTPUT_VAL	0x0C
+#define GPIO_RISE_IE	0x18
+#define GPIO_RISE_IP	0x1C
+#define GPIO_FALL_IE	0x20
+#define GPIO_FALL_IP	0x24
+#define GPIO_HIGH_IE	0x28
+#define GPIO_HIGH_IP	0x2C
+#define GPIO_LOW_IE	0x30
+#define GPIO_LOW_IP	0x34
+#define GPIO_OUTPUT_XOR	0x40
+
+#define NR_GPIOS	16
+
+enum gpio_state {
+	LOW,
+	HIGH
+};
+
+/* Details about a GPIO bank */
+struct sifive_gpio_plat {
+	void *base;     /* address of registers in physical memory */
+};
+
+#define SIFIVE_GENERIC_GPIO_NR(port, index) \
+		(((port) * NR_GPIOS) + ((index) & (NR_GPIOS - 1)))
+
+#endif /* _GPIO_SIFIVE_H */
arch/riscv/include/asm/arch-fu740/reset.h new file +13 -0
new file mode 100644
index 0000000000..538ef87410
@@ -0,0 +1,13 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (c) 2020-2021 SiFive, Inc.
+ *
+ * Author: Sagar Kadam <[email protected]>
+ */
+
+#ifndef __RESET_SIFIVE_H
+#define __RESET_SIFIVE_H
+
+int sifive_reset_bind(struct udevice *dev, ulong count);
+
+#endif
arch/riscv/include/asm/arch-fu740/spl.h new file +14 -0
new file mode 100644
index 0000000000..15ad9e7c8b
@@ -0,0 +1,14 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2020-2021 SiFive, Inc.
+ *
+ * Authors:
+ *   Pragnesh Patel <[email protected]>
+ */
+
+#ifndef _SPL_SIFIVE_H
+#define _SPL_SIFIVE_H
+
+int spl_soc_init(void);
+
+#endif /* _SPL_SIFIVE_H */
arch/riscv/lib/sifive_clint.c +0 -1
index ab22395c55..cfa288a01a 100644
@@ -10,7 +10,6 @@
 
 #include <common.h>
 #include <dm.h>
-#include <asm/global_data.h>
 #include <asm/io.h>
 #include <asm/smp.h>
 #include <linux/err.h>
Signature · 1 line
2.31.0

A message that is not in the archive (sent off-list or not yet received): [email protected]

#9 lore raw

PATCH v6 2/7 riscv: cpu: fu740: Add support for cpu fu740

Quoted 9 lines

From: Green Wan [mailto:green.wan at sifive.com]
Sent: Thursday, April 08, 2021 9:40 PM
Cc: bmeng.cn at gmail.com; Green Wan <[email protected]>; Rick Jian-Zhi Chen(???) <[email protected]>; Paul Walmsley <[email protected]>; Palmer Dabbelt <[email protected]>; Anup Patel <[email protected]>; Atish Patra <[email protected]>; Pragnesh Patel <[email protected]>; Lukasz Majewski <[email protected]>; Joe Hershberger <[email protected]>; Ramon Fried <[email protected]>; u-boot at lists.denx.de
Subject: [PATCH v6 2/7] riscv: cpu: fu740: Add support for cpu fu740

Add SiFive fu740 cpu to support RISC-V arch

Quoted 13 lines
---
 arch/riscv/Kconfig                        |  1 +
 arch/riscv/cpu/fu740/Kconfig              | 37 +++++++++++++++
 arch/riscv/cpu/fu740/Makefile             | 12 +++++
 arch/riscv/cpu/fu740/cache.c              | 55 +++++++++++++++++++++++
 arch/riscv/cpu/fu740/cpu.c                | 22 +++++++++
 arch/riscv/cpu/fu740/dram.c               | 38 ++++++++++++++++
 arch/riscv/cpu/fu740/spl.c                | 23 ++++++++++
 arch/riscv/include/asm/arch-fu740/cache.h | 14 ++++++
 arch/riscv/include/asm/arch-fu740/clk.h   | 14 ++++++
 arch/riscv/include/asm/arch-fu740/gpio.h  | 38 ++++++++++++++++  arch/riscv/include/asm/arch-fu740/reset.h | 13 ++++++
 arch/riscv/include/asm/arch-fu740/spl.h   | 14 ++++++
 arch/riscv/lib/sifive_clint.c             |  1 -

Refer to comments about [PATCH v7 1/8].
https://www.mail-archive.com/u-boot at lists.denx.de/msg405522.html Hope same code base can be effective re-use in the future.

author
#10 lore raw

PATCH v6 3/7 drivers: clk: add fu740 support

In reply to Green Wan

Add fu740 support. One abstract layer is added for supporting multiple chips such as fu540 and fu740.

---
 drivers/clk/sifive/Kconfig       |   8 +-
 drivers/clk/sifive/Makefile      |   4 +-
 drivers/clk/sifive/fu540-prci.c  | 769 +------------------------------
 drivers/clk/sifive/fu540-prci.h  |  22 +
 drivers/clk/sifive/fu740-prci.c  | 158 +++++++
 drivers/clk/sifive/fu740-prci.h  |  22 +
 drivers/clk/sifive/sifive-prci.c | 733 +++++++++++++++++++++++++++++
 drivers/clk/sifive/sifive-prci.h | 323 +++++++++++++
 8 files changed, 1286 insertions(+), 753 deletions(-)
 create mode 100644 drivers/clk/sifive/fu540-prci.h
 create mode 100644 drivers/clk/sifive/fu740-prci.c
 create mode 100644 drivers/clk/sifive/fu740-prci.h
 create mode 100644 drivers/clk/sifive/sifive-prci.c
 create mode 100644 drivers/clk/sifive/sifive-prci.h
drivers/clk/sifive/Kconfig +4 -4
index c4d0a1f9b1..20fc004b59 100644
@@ -6,11 +6,11 @@ config CLK_SIFIVE
 	help
 	  SoC drivers for SiFive Linux-capable SoCs.
 
-config CLK_SIFIVE_FU540_PRCI
-	bool "PRCI driver for SiFive FU540 SoCs"
+config CLK_SIFIVE_PRCI
+	bool "PRCI driver for SiFive SoCs"
 	depends on CLK_SIFIVE
 	select CLK_ANALOGBITS_WRPLL_CLN28HPC
 	help
 	  Supports the Power Reset Clock interface (PRCI) IP block found in
-	  FU540 SoCs.  If this kernel is meant to run on a SiFive FU540 SoC,
-	  enable this driver.
+	  FU540/FU740 SoCs. If this kernel is meant to run on a SiFive FU540/
+	  FU740 SoCs, enable this driver.
drivers/clk/sifive/Makefile +3 -1
index b224279afb..51348b1ddc 100644
@@ -1,3 +1,5 @@
 # SPDX-License-Identifier: GPL-2.0+
 
-obj-$(CONFIG_CLK_SIFIVE_FU540_PRCI)		+= fu540-prci.o
+obj-y += sifive-prci.o
+
+obj-$(CONFIG_CLK_SIFIVE_PRCI) += fu540-prci.o fu740-prci.o
drivers/clk/sifive/fu540-prci.c +21 -748

807 lines not on this page · raw message

drivers/clk/sifive/fu540-prci.h new file +22 -0
new file mode 100644
index 0000000000..113301107d
@@ -0,0 +1,22 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2020-2021 SiFive, Inc.
+ * Zong Li
+ * Pragnesh Patel
+ */
+
+#ifndef __SIFIVE_CLK_FU540_PRCI_H
+#define __SIFIVE_CLK_FU540_PRCI_H
+
+#include "sifive-prci.h"
+
+#define NUM_CLOCK_FU540	4
+
+extern struct __prci_clock __prci_init_clocks_fu540[NUM_CLOCK_FU540];
+
+static const struct prci_clk_desc prci_clk_fu540 = {
+	.clks = __prci_init_clocks_fu540,
+	.num_clks = ARRAY_SIZE(__prci_init_clocks_fu540),
+};
+
+#endif /* __SIFIVE_CLK_FU540_PRCI_H */
drivers/clk/sifive/fu740-prci.c new file +158 -0

158 lines not on this page · raw message

drivers/clk/sifive/fu740-prci.h new file +22 -0
new file mode 100644
index 0000000000..b74f078906
@@ -0,0 +1,22 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2020-2021 SiFive, Inc.
+ * Zong Li
+ * Pragnesh Patel
+ */
+
+#ifndef __SIFIVE_CLK_FU740_PRCI_H
+#define __SIFIVE_CLK_FU740_PRCI_H
+
+#include "sifive-prci.h"
+
+#define NUM_CLOCK_FU740		9
+
+extern struct __prci_clock __prci_init_clocks_fu740[NUM_CLOCK_FU740];
+
+static const struct prci_clk_desc prci_clk_fu740 = {
+	.clks = __prci_init_clocks_fu740,
+	.num_clks = ARRAY_SIZE(__prci_init_clocks_fu740),
+};
+
+#endif /* __SIFIVE_CLK_FU740_PRCI_H */
drivers/clk/sifive/sifive-prci.c new file +733 -0

733 lines not on this page · raw message

drivers/clk/sifive/sifive-prci.h new file +323 -0

323 lines not on this page · raw message

Signature · 1 line
2.31.0
author
#11 lore raw

PATCH v6 4/7 drivers: ram: sifive: rename fu540_ddr and add fu740 support

In reply to Green Wan

Rename fu540_ddr.c to sifive_ddr.c and add fu740 support

---
 drivers/ram/sifive/Kconfig                    |  8 +-
 drivers/ram/sifive/Makefile                   |  2 +-
 .../ram/sifive/{fu540_ddr.c => sifive_ddr.c}  | 89 ++++++++++---------
 3 files changed, 50 insertions(+), 49 deletions(-)
 rename drivers/ram/sifive/{fu540_ddr.c => sifive_ddr.c} (81%)
drivers/ram/sifive/Kconfig +4 -4
index 08de692e02..0aaac02656 100644
@@ -5,9 +5,9 @@ config RAM_SIFIVE
 	help
 	  This enables support for ram drivers of SiFive SoCs.
 
-config SIFIVE_FU540_DDR
-	bool "SiFive FU540 DDR driver"
+config SIFIVE_DDR
+	bool "SiFive DDR driver"
 	depends on RAM_SIFIVE
-	default y if TARGET_SIFIVE_UNLEASHED
+	default y if TARGET_SIFIVE_UNLEASHED || TARGET_SIFIVE_UNMATCHED
 	help
-	  This enables DDR support for the platforms based on SiFive FU540 SoC.
+	  This enables DDR support for the platforms based on SiFive SoC.
drivers/ram/sifive/Makefile +1 -1
index d66efec264..4ef89f85bb 100644
@@ -3,4 +3,4 @@
 # Copyright (c) 2020 SiFive, Inc
 #
 
-obj-$(CONFIG_SIFIVE_FU540_DDR) += fu540_ddr.o
+obj-$(CONFIG_SIFIVE_DDR) += sifive_ddr.o
drivers/ram/sifive/sifive_ddr.c renamed from drivers/ram/sifive/fu540_ddr.c +45 -44

231 lines not on this page · raw message

Signature · 1 line
2.31.0
author
#12 lore raw

PATCH v6 5/7 drivers: pci: add pcie support for fu740

In reply to Green Wan

Add pcie driver for SiFive fu740, the driver depends on fu740 gpio, clk and reset driver to do init. Force running at Gen1 for better capatible enumeration.

Several devices are tested:
a) M.2 NVMe SSD
b) USB-to-PCI adapter
c) Ethernet adapter (E1000 compatible)

---
 drivers/pci/Kconfig       |   9 +
 drivers/pci/Makefile      |   1 +
 drivers/pci/pcie_sifive.c | 797 ++++++++++++++++++++++++++++++++++++++
 drivers/pci/pcie_sifive.h | 374 ++++++++++++++++++
 4 files changed, 1181 insertions(+)
 create mode 100644 drivers/pci/pcie_sifive.c
 create mode 100644 drivers/pci/pcie_sifive.h
drivers/pci/Kconfig +9 -0
index ba41787f64..b078e7689e 100644
@@ -97,6 +97,15 @@ config PCIE_DW_MVEBU
 	  Armada-8K SoCs. The PCIe controller on Armada-8K is based on
 	  DesignWare hardware.
 
+config PCIE_SIFIVE_FU740
+	bool "Enable SiFive FU740 PCIe"
+	depends on CLK_SIFIVE_PRCI
+	depends on RESET_SIFIVE
+	depends on SIFIVE_GPIO
+	help
+	  Say Y here if you want to enable PCIe controller support on
+	  FU740.
+
 config PCIE_FSL
 	bool "FSL PowerPC PCIe support"
 	depends on DM_PCI
drivers/pci/Makefile +1 -0
index 5ed94bc95c..5400d59cc5 100644
@@ -51,3 +51,4 @@ obj-$(CONFIG_PCIE_ROCKCHIP) += pcie_rockchip.o
 obj-$(CONFIG_PCIE_DW_ROCKCHIP) += pcie_dw_rockchip.o
 obj-$(CONFIG_PCI_BRCMSTB) += pcie_brcmstb.o
 obj-$(CONFIG_PCI_OCTEONTX) += pci_octeontx.o
+obj-$(CONFIG_PCIE_SIFIVE_FU740) += pcie_sifive.o
drivers/pci/pcie_sifive.c new file +797 -0

797 lines not on this page · raw message

drivers/pci/pcie_sifive.h new file +374 -0

374 lines not on this page · raw message

Signature · 1 line
2.31.0
#13 lore raw

PATCH v6 5/7 drivers: pci: add pcie support for fu740

Hi Green,

Quoted 11 lines · Green Wan

Add pcie driver for SiFive fu740, the driver depends on fu740 gpio, clk and reset driver to do init. Force running at Gen1 for better capatible enumeration.

Several devices are tested:
a) M.2 NVMe SSD
b) USB-to-PCI adapter
c) Ethernet adapter (E1000 compatible)

Quoted 9 lines
---
 drivers/pci/Kconfig       |   9 +
 drivers/pci/Makefile      |   1 +
 drivers/pci/pcie_sifive.c | 797 ++++++++++++++++++++++++++++++++++++++
 drivers/pci/pcie_sifive.h | 374 ++++++++++++++++++
 4 files changed, 1181 insertions(+)
 create mode 100644 drivers/pci/pcie_sifive.c
 create mode 100644 drivers/pci/pcie_sifive.h

The DW PCIe refactor patch series is now in u-boot/master. Please submit a new version based on the new DW PCIe driver to support fu740 PCIe. Thanks!

Regards,
Bin

author
#14 lore raw

PATCH v6 5/7 drivers: pci: add pcie support for fu740

Quoted 25 lines · Bin Meng

Hi Green,

Quoted 11 lines · Green Wan

Add pcie driver for SiFive fu740, the driver depends on fu740 gpio, clk and reset driver to do init. Force running at Gen1 for better capatible enumeration.

Several devices are tested:
a) M.2 NVMe SSD
b) USB-to-PCI adapter
c) Ethernet adapter (E1000 compatible)

Quoted 9 lines
---
 drivers/pci/Kconfig       |   9 +
 drivers/pci/Makefile      |   1 +
 drivers/pci/pcie_sifive.c | 797 ++++++++++++++++++++++++++++++++++++++
 drivers/pci/pcie_sifive.h | 374 ++++++++++++++++++
 4 files changed, 1181 insertions(+)
 create mode 100644 drivers/pci/pcie_sifive.c
 create mode 100644 drivers/pci/pcie_sifive.h
Quoted 3 lines

The DW PCIe refactor patch series is now in u-boot/master. Please submit a new version based on the new DW PCIe driver to support fu740 PCIe. Thanks!

OK, I'll apply the refactor patch to this.

Quoted 3 lines

Regards,
Bin

author
#15 lore raw

PATCH v6 6/7 board: sifive: add HiFive Unmatched board support

In reply to Green Wan

Add dts, defconfig and board support for HiFive Unmatched.

---
 arch/riscv/Kconfig                            |    4 +
 .../dts/fu740-hifive-unmatched-a00-ddr.dtsi   | 1489 +++++++++++++++++
 .../dts/hifive-unmatched-a00-u-boot.dtsi      |   40 +
 arch/riscv/dts/hifive-unmatched-a00.dts       |  259 +++
 board/sifive/unleashed/Kconfig                |    1 +
 board/sifive/unmatched/Kconfig                |   50 +
 board/sifive/unmatched/MAINTAINERS            |    9 +
 board/sifive/unmatched/Makefile               |    9 +
 board/sifive/unmatched/spl.c                  |   85 +
 board/sifive/unmatched/unmatched.c            |   24 +
 common/spl/Kconfig                            |    4 +-
 configs/sifive_unleashed_defconfig            |    1 +
 configs/sifive_unmatched_defconfig            |   53 +
 doc/board/sifive/index.rst                    |    1 +
 doc/board/sifive/unmatched.rst                |  536 ++++++
 drivers/reset/Kconfig                         |    2 +-
 include/configs/sifive-unmatched.h            |   85 +
 17 files changed, 2649 insertions(+), 3 deletions(-)
 create mode 100644 arch/riscv/dts/fu740-hifive-unmatched-a00-ddr.dtsi
 create mode 100644 arch/riscv/dts/hifive-unmatched-a00-u-boot.dtsi
 create mode 100644 arch/riscv/dts/hifive-unmatched-a00.dts
 create mode 100644 board/sifive/unmatched/Kconfig
 create mode 100644 board/sifive/unmatched/MAINTAINERS
 create mode 100644 board/sifive/unmatched/Makefile
 create mode 100644 board/sifive/unmatched/spl.c
 create mode 100644 board/sifive/unmatched/unmatched.c
 create mode 100644 configs/sifive_unmatched_defconfig
 create mode 100644 doc/board/sifive/unmatched.rst
 create mode 100644 include/configs/sifive-unmatched.h
arch/riscv/Kconfig +4 -0
index 323c3587ae..7c053ace2b 100644
@@ -20,6 +20,9 @@ config TARGET_QEMU_VIRT
 config TARGET_SIFIVE_UNLEASHED
 	bool "Support SiFive Unleashed Board"
 
+config TARGET_SIFIVE_UNMATCHED
+	bool "Support SiFive Unmatched Board"
+
 config TARGET_SIPEED_MAIX
 	bool "Support Sipeed Maix Board"
 
@@ -56,6 +59,7 @@ source "board/AndesTech/ax25-ae350/Kconfig"
 source "board/emulation/qemu-riscv/Kconfig"
 source "board/microchip/mpfs_icicle/Kconfig"
 source "board/sifive/unleashed/Kconfig"
+source "board/sifive/unmatched/Kconfig"
 source "board/sipeed/maix/Kconfig"
 
 # platform-specific options below
arch/riscv/dts/fu740-hifive-unmatched-a00-ddr.dtsi new file +1489 -0

1,489 lines not on this page · raw message

arch/riscv/dts/hifive-unmatched-a00-u-boot.dtsi new file +40 -0
new file mode 100644
index 0000000000..3dcd2b4987
@@ -0,0 +1,40 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2020-2021 SiFive, Inc
+ */
+
+#include "fu740-c000-u-boot.dtsi"
+#include "fu740-hifive-unmatched-a00-ddr.dtsi"
+
+/ {
+	aliases {
+		spi0 = &spi0;
+	};
+
+	memory at 80000000 {
+		u-boot,dm-spl;
+	};
+
+	hfclk {
+		u-boot,dm-spl;
+	};
+
+	rtcclk {
+		u-boot,dm-spl;
+	};
+
+};
+
+&clint {
+	clocks = <&rtcclk>;
+};
+
+&spi0 {
+	mmc at 0 {
+		u-boot,dm-spl;
+	};
+};
+
+&gpio {
+	u-boot,dm-spl;
+};
arch/riscv/dts/hifive-unmatched-a00.dts new file +259 -0

259 lines not on this page · raw message

board/sifive/unleashed/Kconfig +1 -0
index dbffd59c98..833cbd370d 100644
@@ -27,6 +27,7 @@ config BOARD_SPECIFIC_OPTIONS # dummy
 	def_bool y
 	select SIFIVE_FU540
 	select ENV_IS_IN_SPI_FLASH
+	select RESET_SIFIVE
 	imply CMD_DHCP
 	imply CMD_EXT2
 	imply CMD_EXT4
board/sifive/unmatched/Kconfig new file +50 -0

50 lines not on this page · raw message

board/sifive/unmatched/MAINTAINERS new file +9 -0
new file mode 100644
index 0000000000..94c9510bfa
@@ -0,0 +1,9 @@
+SiFive HiFive Unmatched FU740 BOARD
+M:	Paul Walmsley <[email protected]>
+M:	Pragnesh Patel <[email protected]>
+M:	Green Wan <[email protected]>
+S:	Maintained
+F:	board/sifive/unmatched/
+F:	doc/board/sifive/hifive-unmatched-fu740.rst
+F:	include/configs/sifive-unmatched.h
+F:	configs/sifive_unmatched_defconfig
board/sifive/unmatched/Makefile new file +9 -0
new file mode 100644
index 0000000000..6308c80d64
@@ -0,0 +1,9 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Copyright (c) 2020-2021 SiFive, Inc
+
+obj-y   += unmatched.o
+
+ifdef CONFIG_SPL_BUILD
+obj-y += spl.o
+endif
board/sifive/unmatched/spl.c new file +85 -0

85 lines not on this page · raw message

board/sifive/unmatched/unmatched.c new file +24 -0
new file mode 100644
index 0000000000..6d60559588
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2020-2021, SiFive Inc
+ *
+ * Authors:
+ *   Pragnesh Patel <[email protected]>
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <asm/arch/cache.h>
+
+int board_init(void)
+{
+	int ret;
+
+	/* enable all cache ways */
+	ret = cache_enable_ways();
+	if (ret) {
+		debug("%s: could not enable cache ways\n", __func__);
+		return ret;
+	}
+	return 0;
+}
common/spl/Kconfig +2 -2
index 6e6a790dd6..3acd8fa6e1 100644
@@ -318,7 +318,7 @@ config SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR
 		     ARCH_ROCKCHIP || ARCH_MVEBU ||  ARCH_SOCFPGA || \
 		     ARCH_AT91 || ARCH_ZYNQ || ARCH_KEYSTONE || OMAP34XX || \
 		     OMAP44XX || OMAP54XX || AM33XX || AM43XX || \
-		     TARGET_SIFIVE_UNLEASHED
+		     TARGET_SIFIVE_UNLEASHED || TARGET_SIFIVE_UNMATCHED
 	help
 	  Use sector number for specifying U-Boot location on MMC/SD in
 	  raw mode.
@@ -335,7 +335,7 @@ config SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR
 	default 0x300 if ARCH_ZYNQ || ARCH_KEYSTONE || OMAP34XX || OMAP44XX || \
 		         OMAP54XX || AM33XX || AM43XX || ARCH_K3
 	default 0x4000 if ARCH_ROCKCHIP
-	default 0x822 if TARGET_SIFIVE_UNLEASHED
+	default 0x822 if TARGET_SIFIVE_UNLEASHED || TARGET_SIFIVE_UNMATCHED
 	help
 	  Address on the MMC to load U-Boot from, when the MMC is being used
 	  in raw mode. Units: MMC sectors (1 sector = 512 bytes).
configs/sifive_unleashed_defconfig +1 -0
index 62416a7c1d..58e0718b7c 100644
@@ -27,3 +27,4 @@ CONFIG_SPL_DM_SEQ_ALIAS=y
 CONFIG_SPL_CLK=y
 CONFIG_DM_MTD=y
 CONFIG_DM_RESET=y
+CONFIG_CLK_SIFIVE_PRCI=y
configs/sifive_unmatched_defconfig new file +53 -0

53 lines not on this page · raw message

doc/board/sifive/index.rst +1 -0
index ed7eacfb54..a43937a3e0 100644
@@ -7,3 +7,4 @@ SiFive
    :maxdepth: 2
 
    unleashed
+   unmatched
doc/board/sifive/unmatched.rst new file +536 -0

536 lines not on this page · raw message

drivers/reset/Kconfig +1 -1
index 019565f979..8ddea851e8 100644
@@ -166,7 +166,7 @@ config RESET_IPQ419
 
 config RESET_SIFIVE
 	bool "Reset Driver for SiFive SoC's"
-	depends on DM_RESET && CLK_SIFIVE_FU540_PRCI && TARGET_SIFIVE_UNLEASHED
+	depends on DM_RESET && CLK_SIFIVE_FU540_PRCI && (TARGET_SIFIVE_UNLEASHED || TARGET_SIFIVE_UNMATCHED)
 	default y
 	help
 	  PRCI module within SiFive SoC's provides mechanism to reset
include/configs/sifive-unmatched.h new file +85 -0

85 lines not on this page · raw message

Signature · 1 line
2.31.0
author
#16 lore raw

PATCH v6 7/7 drivers: net: macb: add fu740 support

In reply to Green Wan

From: David Abdurachmanov <[email protected]>

Add fu740 support to macb ethernet driver

There is a PLL HW quirk in FU740. The VSC8541XMV-02 specification requires 125 +/-0.0125 Mhz. But the most close value can be output by PLL is 125.125 MHz and out of VSC8541XMV-02 spec.

---
 drivers/net/macb.c | 13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)
drivers/net/macb.c +12 -1
index 57ea45e2dc..bf70525c54 100644
@@ -591,8 +591,17 @@ static int macb_sifive_clk_init(struct udevice *dev, ulong rate)
 	 * 0 = GMII mode. Use 125 MHz gemgxlclk from PRCI in TX logic
 	 *     and output clock on GMII output signal GTX_CLK
 	 * 1 = MII mode. Use MII input signal TX_CLK in TX logic
+	 *
+	 * FU740 have a PLL HW quirk. The 125.125 Mhz is actually out of
+	 * VSC8541XMV-02 specification. The tolerance level is +/-100ppm.
+	 * Which means the range should be in between 125MHz +/-0.0125.
+	 * But the most close value can be output by PLL is 125.125 MHz.
 	 */
-	writel(rate != 125000000, gemgxl_regs);
+	if (device_is_compatible(dev, "sifive,fu540-c000-gem"))
+		writel(rate != 125000000, gemgxl_regs);
+	else if (device_is_compatible(dev, "sifive,fu740-c000-gem"))
+		writel(rate != 125125000, gemgxl_regs);
+
 	return 0;
 }
 
@@ -1507,6 +1516,8 @@ static const struct udevice_id macb_eth_ids[] = {
 	{ .compatible = "cdns,zynq-gem" },
 	{ .compatible = "sifive,fu540-c000-gem",
 	  .data = (ulong)&sifive_config },
+	{ .compatible = "sifive,fu740-c000-gem",
+	  .data = (ulong)&sifive_config },
 	{ .compatible = "microchip,mpfs-mss-gem",
 	  .data = (ulong)&microchip_config },
 	{ }
Signature · 1 line
2.31.0