Skip to contentSkip to conversation

Introduce the Counter character device interface

PATCH Superseded William Breathitt Gray 3 participants 55 messages Mar 19, 2021 – Apr 15, 2021

Subsystems (10)
Documentation IIO Arm STM32 Counter +6 more subsystems

v10 of 17 Superseded Latest is v17 →

lore
Share & tools
lore
#0 lore raw

v10 cover Introduce the Counter character device interface

Changes in v10:
- Use sysfs_emit_at() in enums_available_show() and strs_available_show() in order to concatenate list of strings
- Use sprintf() in counter_comp_id_show(); only printing an size_t so there is no risk of exceeding PAGE_SIZE

Note that this revision is based on top of 3 prerequisite patches:
* counter: stm32-timer-cnt: fix ceiling miss-alignment with reload register
* counter: stm32-timer-cnt: fix ceiling write max value
* counter: stm32-timer-cnt: Report count function when SLAVE_MODE_DISABLED

I pulled out a lot of bits and pieces to their own patches; hopefully that makes reviewing this patchset much simpler than before. This patchset is also available on my personal public git repo for anyone who wants a quick way to clone:
https://gitlab.com/vilhelmgray/iio/-/tree/counter_chrdev_v10

The patches preceding "counter: Internalize sysfs interface code" are primarily cleanup and fixes that can be picked up and applied now to the IIO tree if so desired. The "counter: Internalize sysfs interface code" patch as well may be considered for pickup because it is relatively safe and makes no changes to the userspace interface.

To summarize the main points of this patchset: there are no changes to the existing Counter sysfs userspace interface; a Counter character device interface is introduced that allows Counter events and associated data to be read() by userspace; the events_configure() and watch_validate() driver callbacks are introduced to support Counter events; and IRQ support is added to the 104-QUAD-8 driver, serving as an example of how to support the new Counter events functionality.

Something that should still be discussed: should the struct counter_event "status" member be 8 bits or 32 bits wide? This member will provide the return status (system error number) of an event operation.

William Breathitt Gray (33):
docs: counter: Consolidate Counter sysfs attributes documentation
docs: counter: Fix spelling
counter: 104-quad-8: Remove pointless comment
counter: 104-quad-8: Return error when invalid mode during
ceiling_write
counter: 104-quad-8: Annotate hardware config module parameter
counter: 104-quad-8: Add const qualifiers for
quad8_preset_register_set
counter: 104-quad-8: Add const qualifier for functions_list array
counter: interrupt-cnt: Add const qualifier for functions_list array
counter: microchip-tcb-capture: Add const qualifier for functions_list
array
counter: stm32-lptimer-cnt: Add const qualifier for functions_list
array
counter: stm32-timer-cnt: Add const qualifier for functions_list array
counter: 104-quad-8: Add const qualifier for actions_list array
counter: ftm-quaddec: Add const qualifier for actions_list array
counter: interrupt-cnt: Add const qualifier for actions_list array
counter: microchip-tcb-capture: Add const qualifier for actions_list
array
counter: stm32-lptimer-cnt: Add const qualifier for actions_list array
counter: stm32-timer-cnt: Add const qualifier for actions_list array
counter: Return error code on invalid modes
counter: Standardize to ERANGE for limit exceeded errors
counter: Rename counter_signal_value to counter_signal_level
counter: Rename counter_count_function to counter_function
counter: Internalize sysfs interface code
counter: Update counter.h comments to reflect sysfs internalization
docs: counter: Update to reflect sysfs internalization
counter: Move counter enums to uapi header
counter: Add character device interface
docs: counter: Document character device interface tools/counter: Create Counter tools
counter: Implement signalZ_action_component_id sysfs attribute
counter: Implement *_component_id sysfs attributes
counter: Implement events_queue_size sysfs attribute
counter: 104-quad-8: Replace mutex with spinlock
counter: 104-quad-8: Add IRQ support for the ACCES 104-QUAD-8

 Documentation/ABI/testing/sysfs-bus-counter   |  112 +-
 .../ABI/testing/sysfs-bus-counter-104-quad-8  |   61 -
 .../ABI/testing/sysfs-bus-counter-ftm-quaddec |   16 -
 Documentation/driver-api/generic-counter.rst  |  368 +++-
 .../userspace-api/ioctl/ioctl-number.rst      |    1 +
 MAINTAINERS                                   |    7 +-
 drivers/counter/104-quad-8.c                  |  739 ++++----
 drivers/counter/Kconfig                       |    6 +-
 drivers/counter/Makefile                      |    1 +
 drivers/counter/counter-chrdev.c              |  486 ++++++
 drivers/counter/counter-chrdev.h              |   14 +
 drivers/counter/counter-core.c                |  192 +++
 drivers/counter/counter-sysfs.c               |  953 +++++++++++
 drivers/counter/counter-sysfs.h               |   13 +
 drivers/counter/counter.c                     | 1496 -----------------
 drivers/counter/ftm-quaddec.c                 |   61 +-
 drivers/counter/interrupt-cnt.c               |   75 +-
 drivers/counter/microchip-tcb-capture.c       |  105 +-
 drivers/counter/stm32-lptimer-cnt.c           |  176 +-
 drivers/counter/stm32-timer-cnt.c             |  149 +-
 drivers/counter/ti-eqep.c                     |  221 +--
 include/linux/counter.h                       |  716 ++++----
 include/linux/counter_enum.h                  |   45 -
 include/uapi/linux/counter.h                  |  133 ++
 tools/Makefile                                |   13 +-
 tools/counter/Build                           |    1 +
 tools/counter/Makefile                        |   53 +
 tools/counter/counter_example.c               |   95 ++
 28 files changed, 3522 insertions(+), 2786 deletions(-)
 delete mode 100644 Documentation/ABI/testing/sysfs-bus-counter-104-quad-8
 delete mode 100644 Documentation/ABI/testing/sysfs-bus-counter-ftm-quaddec
 create mode 100644 drivers/counter/counter-chrdev.c
 create mode 100644 drivers/counter/counter-chrdev.h
 create mode 100644 drivers/counter/counter-core.c
 create mode 100644 drivers/counter/counter-sysfs.c
 create mode 100644 drivers/counter/counter-sysfs.h
 delete mode 100644 drivers/counter/counter.c
 delete mode 100644 include/linux/counter_enum.h
 create mode 100644 include/uapi/linux/counter.h
 create mode 100644 tools/counter/Build
 create mode 100644 tools/counter/Makefile
 create mode 100644 tools/counter/counter_example.c

base-commit: 69333b92c35cdd6cdfc90c4f5daa418cfeb40213
prerequisite-patch-id: 41fda3a386861edad110c644567fad373a5a175e
prerequisite-patch-id: c6c2ab3173f5a0136d1e9b7b96ccd115fa35d66e
prerequisite-patch-id: 7e3cd78924d79890b690f3029e0d4f5b3902a73c

Signature · 1 line
2.30.2
#1 lore raw

PATCH v10 1/33 docs: counter: Consolidate Counter sysfs attributes documentation

Duplicate ABIs are not valid, so let's consolidate these sysfs attributes into the main sysfs-bus-counter documentation file.

---
 Documentation/ABI/testing/sysfs-bus-counter   | 76 ++++++++++++++++++-
 .../ABI/testing/sysfs-bus-counter-104-quad-8  | 61 ---------------
 .../ABI/testing/sysfs-bus-counter-ftm-quaddec | 16 ----
 MAINTAINERS                                   |  4 +-
 4 files changed, 75 insertions(+), 82 deletions(-)
 delete mode 100644 Documentation/ABI/testing/sysfs-bus-counter-104-quad-8
 delete mode 100644 Documentation/ABI/testing/sysfs-bus-counter-ftm-quaddec
Documentation/ABI/testing/sysfs-bus-counter +74 -2
index 566bd99fe0a5..29f54484183f 100644
@@ -57,6 +57,7 @@ Description:
 What:		/sys/bus/counter/devices/counterX/countY/count_mode_available
 What:		/sys/bus/counter/devices/counterX/countY/error_noise_available
 What:		/sys/bus/counter/devices/counterX/countY/function_available
+What:		/sys/bus/counter/devices/counterX/countY/prescaler_available
 What:		/sys/bus/counter/devices/counterX/countY/signalZ_action_available
 KernelVersion:	5.2
 Contact:	[email protected]
@@ -154,6 +155,15 @@ Description:
 		Count Y. If possible, this should match the name of the
 		respective channel as it appears in the device datasheet.
 
+What:		/sys/bus/counter/devices/counterX/countY/prescaler
+KernelVersion:	5.2
+Contact:	[email protected]
+Description:
+		Configure the prescaler value associated with Count Y.
+		On the FlexTimer, the counter clock source passes through a
+		prescaler (i.e. a counter). This acts like a clock
+		divider.
+
 What:		/sys/bus/counter/devices/counterX/countY/preset
 KernelVersion:	5.2
 Contact:	[email protected]
@@ -215,11 +225,45 @@ Description:
 		Read-only attribute that indicates the total number of Signals
 		belonging to the Counter.
 
-What:		/sys/bus/counter/devices/counterX/signalY/signal
+What:		/sys/bus/counter/devices/counterX/signalY/cable_fault
+KernelVersion:	5.7
+Contact:	[email protected]
+Description:
+		Read-only attribute that indicates whether a differential
+		encoder cable fault (not connected or loose wires) is detected
+		for the respective channel of Signal Y. Valid attribute values
+		are boolean. Detection must first be enabled via the
+		corresponding cable_fault_enable attribute.
+
+What:		/sys/bus/counter/devices/counterX/signalY/cable_fault_enable
+KernelVersion:	5.7
+Contact:	[email protected]
+Description:
+		Whether detection of differential encoder cable faults for the
+		respective channel of Signal Y is enabled. Valid attribute
+		values are boolean.
+
+What:		/sys/bus/counter/devices/counterX/signalY/filter_clock_prescaler
+KernelVersion:	5.7
+Contact:	[email protected]
+Description:
+		Filter clock factor for input Signal Y. This prescaler value
+		affects the inputs of both quadrature pair signals.
+
+What:		/sys/bus/counter/devices/counterX/signalY/index_polarity
 KernelVersion:	5.2
 Contact:	[email protected]
 Description:
-		Signal data of Signal Y represented as a string.
+		Active level of index input Signal Y; irrelevant in
+		non-synchronous load mode.
+
+What:		/sys/bus/counter/devices/counterX/signalY/index_polarity_available
+What:		/sys/bus/counter/devices/counterX/signalY/synchronous_mode_available
+KernelVersion:	5.2
+Contact:	[email protected]
+Description:
+		Discrete set of available values for the respective Signal Y
+		configuration are listed in this file.
 
 What:		/sys/bus/counter/devices/counterX/signalY/name
 KernelVersion:	5.2
@@ -228,3 +272,31 @@ Description:
 		Read-only attribute that indicates the device-specific name of
 		Signal Y. If possible, this should match the name of the
 		respective signal as it appears in the device datasheet.
+
+What:		/sys/bus/counter/devices/counterX/signalY/signal
+KernelVersion:	5.2
+Contact:	[email protected]
+Description:
+		Signal data of Signal Y represented as a string.
+
+What:		/sys/bus/counter/devices/counterX/signalY/synchronous_mode
+KernelVersion:	5.2
+Contact:	[email protected]
+Description:
+		Configure the counter associated with Signal Y for
+		non-synchronous or synchronous load mode. Synchronous load mode
+		cannot be selected in non-quadrature (Pulse-Direction) clock
+		mode.
+
+		non-synchronous:
+			A logic low level is the active level at this index
+			input. The index function (as enabled via preset_enable)
+			is performed directly on the active level of the index
+			input.
+
+		synchronous:
+			Intended for interfacing with encoder Index output in
+			quadrature clock mode. The active level is configured
+			via index_polarity. The index function (as enabled via
+			preset_enable) is performed synchronously with the
+			quadrature clock on the active level of the index input.
Documentation/ABI/testing/sysfs-bus-counter-104-quad-8 deleted +0 -61

61 lines not on this page · raw message

Documentation/ABI/testing/sysfs-bus-counter-ftm-quaddec deleted +0 -16
deleted file mode 100644
index 7d2e7b363467..000000000000
@@ -1,16 +0,0 @@
-What:		/sys/bus/counter/devices/counterX/countY/prescaler_available
-KernelVersion:	5.2
-Contact:	[email protected]
-Description:
-		Discrete set of available values for the respective Count Y
-		configuration are listed in this file. Values are delimited by
-		newline characters.
-
-What:		/sys/bus/counter/devices/counterX/countY/prescaler
-KernelVersion:	5.2
-Contact:	[email protected]
-Description:
-		Configure the prescaler value associated with Count Y.
-		On the FlexTimer, the counter clock source passes through a
-		prescaler (i.e. a counter). This acts like a clock
-		divider.
MAINTAINERS +1 -3
index 9a9bf18bba00..ddabf7bb5246 100644
@@ -299,7 +299,6 @@ M:	William Breathitt Gray <[email protected]>
 M:	Syed Nayyar Waris <[email protected]>
 L:	[email protected]
 S:	Maintained
-F:	Documentation/ABI/testing/sysfs-bus-counter-104-quad-8
 F:	drivers/counter/104-quad-8.c
 
 ACCES PCI-IDIO-16 GPIO DRIVER
@@ -4578,7 +4577,7 @@ COUNTER SUBSYSTEM
 M:	William Breathitt Gray <[email protected]>
 L:	[email protected]
 S:	Maintained
-F:	Documentation/ABI/testing/sysfs-bus-counter*
+F:	Documentation/ABI/testing/sysfs-bus-counter
 F:	Documentation/driver-api/generic-counter.rst
 F:	drivers/counter/
 F:	include/linux/counter.h
@@ -6960,7 +6959,6 @@ FLEXTIMER FTM-QUADDEC DRIVER
 M:	Patrick Havelange <[email protected]>
 L:	[email protected]
 S:	Maintained
-F:	Documentation/ABI/testing/sysfs-bus-counter-ftm-quaddec
 F:	Documentation/devicetree/bindings/counter/ftm-quaddec.txt
 F:	drivers/counter/ftm-quaddec.c
 
Signature · 1 line
2.30.2
#2 lore raw

PATCH v10 2/33 docs: counter: Fix spelling

In reply to William Breathitt Gray

"Miscellaneous" is the correct spelling.

---
 Documentation/driver-api/generic-counter.rst | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
Documentation/driver-api/generic-counter.rst +1 -1
index b02c52cd69d6..64fe7db080e5 100644
@@ -307,7 +307,7 @@ Determining the type of extension to create is a matter of scope.
 
 * Device extensions are attributes that expose information/control
   non-specific to a particular Count or Signal. This is where you would
-  put your global features or other miscellanous functionality.
+  put your global features or other miscellaneous functionality.
 
   For example, if your device has an overtemp sensor, you can report the
   chip overheated via a device extension called "error_overtemp":
Signature · 1 line
2.30.2
#3 lore raw

PATCH v10 3/33 counter: 104-quad-8: Remove pointless comment

In reply to William Breathitt Gray

It is obvious that devm_counter_register() is used to register a Counter device, so a comment stating such is pointless here.

---
 drivers/counter/104-quad-8.c | 1 -
 1 file changed, 1 deletion(-)
drivers/counter/104-quad-8.c +0 -1
index 9691f8612be8..4bb9abffae48 100644
@@ -1082,7 +1082,6 @@ static int quad8_probe(struct device *dev, unsigned int id)
 	/* Enable all counters */
 	outb(QUAD8_CHAN_OP_ENABLE_COUNTERS, base[id] + QUAD8_REG_CHAN_OP);
 
-	/* Register Counter device */
 	return devm_counter_register(dev, &priv->counter);
 }
 
Signature · 1 line
2.30.2
Acked-by on v10 3/33
#4 lore raw

Re: [PATCH v10 03/33] counter: 104-quad-8: Remove pointless comment

Quoted 24 lines · William Breathitt Gray

It is obvious that devm_counter_register() is used to register a Counter device, so a comment stating such is pointless here.

---
 drivers/counter/104-quad-8.c | 1 -
 1 file changed, 1 deletion(-)
drivers/counter/104-quad-8.c +0 -1
index 9691f8612be8..4bb9abffae48 100644
@@ -1082,7 +1082,6 @@ static int quad8_probe(struct device *dev, unsigned int id)
 	/* Enable all counters */
 	outb(QUAD8_CHAN_OP_ENABLE_COUNTERS, base[id] + QUAD8_REG_CHAN_OP);
 
-	/* Register Counter device */
 	return devm_counter_register(dev, &priv->counter);
 }
 
Signature · 1 line
2.30.2

_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

#5 lore raw

PATCH v10 4/33 counter: 104-quad-8: Return error when invalid mode during ceiling_write

In reply to William Breathitt Gray

The 104-QUAD-8 only has two count modes where a ceiling value makes
sense: Range Limit and Modulo-N. Outside of these two modes, setting a ceiling value is an invalid operation -- so let's report it as such by returning -EINVAL.

Fixes fc069262261c ("counter: 104-quad-8: Add lock guards - generic interface")
Cc Syed Nayyar Waris <[email protected]>
---
 drivers/counter/104-quad-8.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)
drivers/counter/104-quad-8.c +3 -2
index 4bb9abffae48..233a3acc1377 100644
@@ -714,13 +714,14 @@ static ssize_t quad8_count_ceiling_write(struct counter_device *counter,
 	switch (priv->count_mode[count->id]) {
 	case 1:
 	case 3:
+		mutex_unlock(&priv->lock);
 		quad8_preset_register_set(priv, count->id, ceiling);
-		break;
+		return len;
 	}
 
 	mutex_unlock(&priv->lock);
 
-	return len;
+	return -EINVAL;
 }
 
 static ssize_t quad8_count_preset_enable_read(struct counter_device *counter,
Signature · 1 line
2.30.2
Acked-by on v10 4/33
#6 lore raw

Re: [PATCH v10 04/33] counter: 104-quad-8: Return error when invalid mode during ceiling_write

Quoted 36 lines · William Breathitt Gray

The 104-QUAD-8 only has two count modes where a ceiling value makes
sense: Range Limit and Modulo-N. Outside of these two modes, setting a ceiling value is an invalid operation -- so let's report it as such by returning -EINVAL.

Fixes fc069262261c ("counter: 104-quad-8: Add lock guards - generic interface")
Cc Syed Nayyar Waris <[email protected]>
---
 drivers/counter/104-quad-8.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)
drivers/counter/104-quad-8.c +3 -2
index 4bb9abffae48..233a3acc1377 100644
@@ -714,13 +714,14 @@ static ssize_t quad8_count_ceiling_write(struct counter_device *counter,
 	switch (priv->count_mode[count->id]) {
 	case 1:
 	case 3:
+		mutex_unlock(&priv->lock);
 		quad8_preset_register_set(priv, count->id, ceiling);
-		break;
+		return len;
 	}
 
 	mutex_unlock(&priv->lock);
 
-	return len;
+	return -EINVAL;
 }
 
 static ssize_t quad8_count_preset_enable_read(struct counter_device *counter,
Signature · 1 line
2.30.2
#7 lore raw

PATCH v10 5/33 counter: 104-quad-8: Annotate hardware config module parameter

In reply to William Breathitt Gray

When the kernel is running in secure boot mode, we lock down the kernel to prevent userspace from modifying the running kernel image. Whilst this includes prohibiting access to things like /dev/mem, it must also prevent access by means of configuring driver modules in such a way as to cause a device to access or modify the kernel image.

To this end, annotate module_param* statements that refer to hardware configuration and indicate for future reference what type of parameter they specify. The parameter parser in the core sees this information and can skip such parameters with an error message if the kernel is locked down. The module initialisation then runs as normal, but just sees whatever the default values for those parameters is.

Note that we do still need to do the module initialisation because some drivers have viable defaults set in case parameters aren't specified and some drivers support automatic configuration (e.g. PNP or PCI) in addition to manually coded parameters.

This patch annotates the 104-QUAD-8 driver.

---
 drivers/counter/104-quad-8.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/counter/104-quad-8.c +1 -1
index 233a3acc1377..0fd61cc82d30 100644
@@ -21,7 +21,7 @@
 
 static unsigned int base[max_num_isa_dev(QUAD8_EXTENT)];
 static unsigned int num_quad8;
-module_param_array(base, uint, &num_quad8, 0);
+module_param_hw_array(base, uint, ioport, &num_quad8, 0);
 MODULE_PARM_DESC(base, "ACCES 104-QUAD-8 base addresses");
 
 #define QUAD8_NUM_COUNTERS 8
Signature · 1 line
2.30.2
Acked-by on v10 5/33
#8 lore raw

Re: [PATCH v10 05/33] counter: 104-quad-8: Annotate hardware config module parameter

Quoted 42 lines · William Breathitt Gray

When the kernel is running in secure boot mode, we lock down the kernel to prevent userspace from modifying the running kernel image. Whilst this includes prohibiting access to things like /dev/mem, it must also prevent access by means of configuring driver modules in such a way as to cause a device to access or modify the kernel image.

To this end, annotate module_param* statements that refer to hardware configuration and indicate for future reference what type of parameter they specify. The parameter parser in the core sees this information and can skip such parameters with an error message if the kernel is locked down. The module initialisation then runs as normal, but just sees whatever the default values for those parameters is.

Note that we do still need to do the module initialisation because some drivers have viable defaults set in case parameters aren't specified and some drivers support automatic configuration (e.g. PNP or PCI) in addition to manually coded parameters.

This patch annotates the 104-QUAD-8 driver.

---
 drivers/counter/104-quad-8.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/counter/104-quad-8.c +1 -1
index 233a3acc1377..0fd61cc82d30 100644
@@ -21,7 +21,7 @@
 
 static unsigned int base[max_num_isa_dev(QUAD8_EXTENT)];
 static unsigned int num_quad8;
-module_param_array(base, uint, &num_quad8, 0);
+module_param_hw_array(base, uint, ioport, &num_quad8, 0);
 MODULE_PARM_DESC(base, "ACCES 104-QUAD-8 base addresses");
 
 #define QUAD8_NUM_COUNTERS 8
Signature · 1 line
2.30.2
#9 lore raw

PATCH v10 6/33 counter: 104-quad-8: Add const qualifiers for quad8_preset_register_set

In reply to William Breathitt Gray

Add some safety by qualifying the quad8_preset_register_set() function parameters as const.

---
 drivers/counter/104-quad-8.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/counter/104-quad-8.c +2 -2
index 0fd61cc82d30..51fba8cf9c2a 100644
@@ -632,8 +632,8 @@ static ssize_t quad8_count_preset_read(struct counter_device *counter,
 	return sprintf(buf, "%u\n", priv->preset[count->id]);
 }
 
-static void quad8_preset_register_set(struct quad8 *priv, int id,
-				      unsigned int preset)
+static void quad8_preset_register_set(struct quad8 *const priv, const int id,
+				      const unsigned int preset)
 {
 	const unsigned int base_offset = priv->base + 2 * id;
 	int i;
Signature · 1 line
2.30.2
Acked-by on v10 6/33
#10 lore raw

Re: [PATCH v10 06/33] counter: 104-quad-8: Add const qualifiers for quad8_preset_register_set

Quoted 27 lines · William Breathitt Gray

Add some safety by qualifying the quad8_preset_register_set() function parameters as const.

---
 drivers/counter/104-quad-8.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/counter/104-quad-8.c +2 -2
index 0fd61cc82d30..51fba8cf9c2a 100644
@@ -632,8 +632,8 @@ static ssize_t quad8_count_preset_read(struct counter_device *counter,
 	return sprintf(buf, "%u\n", priv->preset[count->id]);
 }
 
-static void quad8_preset_register_set(struct quad8 *priv, int id,
-				      unsigned int preset)
+static void quad8_preset_register_set(struct quad8 *const priv, const int id,
+				      const unsigned int preset)
 {
 	const unsigned int base_offset = priv->base + 2 * id;
 	int i;
Signature · 1 line
2.30.2

_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

#11 lore raw

PATCH v10 7/33 counter: 104-quad-8: Add const qualifier for functions_list array

In reply to William Breathitt Gray

The struct counter_count functions_list member expects a const enum counter_count_function array. This patch adds the const qualifier to the quad8_count_functions_list to match functions_list.

---
 drivers/counter/104-quad-8.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/counter/104-quad-8.c +1 -1
index 51fba8cf9c2a..ae89ad7a91c6 100644
@@ -193,7 +193,7 @@ enum quad8_count_function {
 	QUAD8_COUNT_FUNCTION_QUADRATURE_X4
 };
 
-static enum counter_count_function quad8_count_functions_list[] = {
+static const enum counter_count_function quad8_count_functions_list[] = {
 	[QUAD8_COUNT_FUNCTION_PULSE_DIRECTION] = COUNTER_COUNT_FUNCTION_PULSE_DIRECTION,
 	[QUAD8_COUNT_FUNCTION_QUADRATURE_X1] = COUNTER_COUNT_FUNCTION_QUADRATURE_X1_A,
 	[QUAD8_COUNT_FUNCTION_QUADRATURE_X2] = COUNTER_COUNT_FUNCTION_QUADRATURE_X2_A,
Signature · 1 line
2.30.2
Acked-by on v10 7/33
#12 lore raw

Re: [PATCH v10 07/33] counter: 104-quad-8: Add const qualifier for functions_list array

Quoted 26 lines · William Breathitt Gray

The struct counter_count functions_list member expects a const enum counter_count_function array. This patch adds the const qualifier to the quad8_count_functions_list to match functions_list.

---
 drivers/counter/104-quad-8.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/counter/104-quad-8.c +1 -1
index 51fba8cf9c2a..ae89ad7a91c6 100644
@@ -193,7 +193,7 @@ enum quad8_count_function {
 	QUAD8_COUNT_FUNCTION_QUADRATURE_X4
 };
 
-static enum counter_count_function quad8_count_functions_list[] = {
+static const enum counter_count_function quad8_count_functions_list[] = {
 	[QUAD8_COUNT_FUNCTION_PULSE_DIRECTION] = COUNTER_COUNT_FUNCTION_PULSE_DIRECTION,
 	[QUAD8_COUNT_FUNCTION_QUADRATURE_X1] = COUNTER_COUNT_FUNCTION_QUADRATURE_X1_A,
 	[QUAD8_COUNT_FUNCTION_QUADRATURE_X2] = COUNTER_COUNT_FUNCTION_QUADRATURE_X2_A,
Signature · 1 line
2.30.2

_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

#13 lore raw

PATCH v10 8/33 counter: interrupt-cnt: Add const qualifier for functions_list array

In reply to William Breathitt Gray

The struct counter_count functions_list member expects a const enum counter_count_function array. This patch adds the const qualifier to the interrupt__cnt_functions to match functions_list.

---
 drivers/counter/interrupt-cnt.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/counter/interrupt-cnt.c +1 -1
index a99ee7996977..827d785e19b4 100644
@@ -112,7 +112,7 @@ static int interrupt_cnt_write(struct counter_device *counter,
 	return 0;
 }
 
-static enum counter_count_function interrupt_cnt_functions[] = {
+static const enum counter_count_function interrupt_cnt_functions[] = {
 	COUNTER_COUNT_FUNCTION_INCREASE,
 };
 
Signature · 1 line
2.30.2
#14 lore raw

PATCH v10 9/33 counter: microchip-tcb-capture: Add const qualifier for functions_list array

In reply to William Breathitt Gray

The struct counter_count functions_list member expects a const enum counter_count_function array. This patch adds the const qualifier to the mchp_tc_count_functions to match functions_list.

---
 drivers/counter/microchip-tcb-capture.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/counter/microchip-tcb-capture.c +1 -1
index 710acc0a3704..cabcfebfc799 100644
@@ -37,7 +37,7 @@ enum mchp_tc_count_function {
 	MCHP_TC_FUNCTION_QUADRATURE,
 };
 
-static enum counter_count_function mchp_tc_count_functions[] = {
+static const enum counter_count_function mchp_tc_count_functions[] = {
 	[MCHP_TC_FUNCTION_INCREASE] = COUNTER_COUNT_FUNCTION_INCREASE,
 	[MCHP_TC_FUNCTION_QUADRATURE] = COUNTER_COUNT_FUNCTION_QUADRATURE_X4,
 };
Signature · 1 line
2.30.2
#15 lore raw

PATCH v10 10/33 counter: stm32-lptimer-cnt: Add const qualifier for functions_list array

In reply to William Breathitt Gray

The struct counter_count functions_list member expects a const enum counter_count_function array. This patch adds the const qualifier to the stm32_lptim_cnt_functions to match functions_list.

---
 drivers/counter/stm32-lptimer-cnt.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/counter/stm32-lptimer-cnt.c +1 -1
index 937439635d53..0f7d3f1ec1b6 100644
@@ -134,7 +134,7 @@ enum stm32_lptim_cnt_function {
 	STM32_LPTIM_ENCODER_BOTH_EDGE,
 };
 
-static enum counter_count_function stm32_lptim_cnt_functions[] = {
+static const enum counter_count_function stm32_lptim_cnt_functions[] = {
 	[STM32_LPTIM_COUNTER_INCREASE] = COUNTER_COUNT_FUNCTION_INCREASE,
 	[STM32_LPTIM_ENCODER_BOTH_EDGE] = COUNTER_COUNT_FUNCTION_QUADRATURE_X4,
 };
Signature · 1 line
2.30.2
maintainer Reviewed-by on v10 10/33
#16 lore raw

Re: [Linux-stm32] [PATCH v10 10/33] counter: stm32-lptimer-cnt: Add const qualifier for functions_list array

Quoted 9 lines · William Breathitt Gray

The struct counter_count functions_list member expects a const enum counter_count_function array. This patch adds the const qualifier to the stm32_lptim_cnt_functions to match functions_list.

---
 drivers/counter/stm32-lptimer-cnt.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Hi William,

You can add my:

Thanks,
Fabrice

Quoted 15 lines
drivers/counter/stm32-lptimer-cnt.c +1 -1
index 937439635d53..0f7d3f1ec1b6 100644
@@ -134,7 +134,7 @@ enum stm32_lptim_cnt_function {
 	STM32_LPTIM_ENCODER_BOTH_EDGE,
 };
 
-static enum counter_count_function stm32_lptim_cnt_functions[] = {
+static const enum counter_count_function stm32_lptim_cnt_functions[] = {
 	[STM32_LPTIM_COUNTER_INCREASE] = COUNTER_COUNT_FUNCTION_INCREASE,
 	[STM32_LPTIM_ENCODER_BOTH_EDGE] = COUNTER_COUNT_FUNCTION_QUADRATURE_X4,
 };
#17 lore raw

PATCH v10 11/33 counter: stm32-timer-cnt: Add const qualifier for functions_list array

In reply to William Breathitt Gray

The struct counter_count functions_list member expects a const enum counter_count_function array. This patch adds the const qualifier to the stm32_count_functions to match functions_list.

Cc Fabrice Gasnier <[email protected]>
Cc Benjamin Gaignard <[email protected]>
---
 drivers/counter/stm32-timer-cnt.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/counter/stm32-timer-cnt.c +1 -1
index 75bc401fdd18..0c18573a7837 100644
@@ -50,7 +50,7 @@ enum stm32_count_function {
 	STM32_COUNT_ENCODER_MODE_3,
 };
 
-static enum counter_count_function stm32_count_functions[] = {
+static const enum counter_count_function stm32_count_functions[] = {
 	[STM32_COUNT_SLAVE_MODE_DISABLED] = COUNTER_COUNT_FUNCTION_INCREASE,
 	[STM32_COUNT_ENCODER_MODE_1] = COUNTER_COUNT_FUNCTION_QUADRATURE_X2_A,
 	[STM32_COUNT_ENCODER_MODE_2] = COUNTER_COUNT_FUNCTION_QUADRATURE_X2_B,
Signature · 1 line
2.30.2
maintainer Reviewed-by on v10 11/33
#18 lore raw

Re: [Linux-stm32] [PATCH v10 11/33] counter: stm32-timer-cnt: Add const qualifier for functions_list array

Quoted 10 lines · William Breathitt Gray

The struct counter_count functions_list member expects a const enum counter_count_function array. This patch adds the const qualifier to the stm32_count_functions to match functions_list.

Cc Fabrice Gasnier <[email protected]>
Cc Benjamin Gaignard <[email protected]>
---
 drivers/counter/stm32-timer-cnt.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Hi William,

You can add my:

Thanks,
Fabrice

Quoted 15 lines
drivers/counter/stm32-timer-cnt.c +1 -1
index 75bc401fdd18..0c18573a7837 100644
@@ -50,7 +50,7 @@ enum stm32_count_function {
 	STM32_COUNT_ENCODER_MODE_3,
 };
 
-static enum counter_count_function stm32_count_functions[] = {
+static const enum counter_count_function stm32_count_functions[] = {
 	[STM32_COUNT_SLAVE_MODE_DISABLED] = COUNTER_COUNT_FUNCTION_INCREASE,
 	[STM32_COUNT_ENCODER_MODE_1] = COUNTER_COUNT_FUNCTION_QUADRATURE_X2_A,
 	[STM32_COUNT_ENCODER_MODE_2] = COUNTER_COUNT_FUNCTION_QUADRATURE_X2_B,
#19 lore raw

PATCH v10 12/33 counter: 104-quad-8: Add const qualifier for actions_list array

In reply to William Breathitt Gray

The struct counter_synapse actions_list member expects a const enum counter_synapse_action array. This patch adds the const qualifier to the quad8_index_actions_list and quad8_synapse_actions_list to match actions_list.

---
 drivers/counter/104-quad-8.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/counter/104-quad-8.c +2 -2
index ae89ad7a91c6..09d779544969 100644
@@ -305,12 +305,12 @@ enum quad8_synapse_action {
 	QUAD8_SYNAPSE_ACTION_BOTH_EDGES
 };
 
-static enum counter_synapse_action quad8_index_actions_list[] = {
+static const enum counter_synapse_action quad8_index_actions_list[] = {
 	[QUAD8_SYNAPSE_ACTION_NONE] = COUNTER_SYNAPSE_ACTION_NONE,
 	[QUAD8_SYNAPSE_ACTION_RISING_EDGE] = COUNTER_SYNAPSE_ACTION_RISING_EDGE
 };
 
-static enum counter_synapse_action quad8_synapse_actions_list[] = {
+static const enum counter_synapse_action quad8_synapse_actions_list[] = {
 	[QUAD8_SYNAPSE_ACTION_NONE] = COUNTER_SYNAPSE_ACTION_NONE,
 	[QUAD8_SYNAPSE_ACTION_RISING_EDGE] = COUNTER_SYNAPSE_ACTION_RISING_EDGE,
 	[QUAD8_SYNAPSE_ACTION_FALLING_EDGE] = COUNTER_SYNAPSE_ACTION_FALLING_EDGE,
Signature · 1 line
2.30.2
Acked-by on v10 12/33
#20 lore raw

Re: [PATCH v10 12/33] counter: 104-quad-8: Add const qualifier for actions_list array

Quoted 33 lines · William Breathitt Gray

The struct counter_synapse actions_list member expects a const enum counter_synapse_action array. This patch adds the const qualifier to the quad8_index_actions_list and quad8_synapse_actions_list to match actions_list.

---
 drivers/counter/104-quad-8.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/counter/104-quad-8.c +2 -2
index ae89ad7a91c6..09d779544969 100644
@@ -305,12 +305,12 @@ enum quad8_synapse_action {
 	QUAD8_SYNAPSE_ACTION_BOTH_EDGES
 };
 
-static enum counter_synapse_action quad8_index_actions_list[] = {
+static const enum counter_synapse_action quad8_index_actions_list[] = {
 	[QUAD8_SYNAPSE_ACTION_NONE] = COUNTER_SYNAPSE_ACTION_NONE,
 	[QUAD8_SYNAPSE_ACTION_RISING_EDGE] = COUNTER_SYNAPSE_ACTION_RISING_EDGE
 };
 
-static enum counter_synapse_action quad8_synapse_actions_list[] = {
+static const enum counter_synapse_action quad8_synapse_actions_list[] = {
 	[QUAD8_SYNAPSE_ACTION_NONE] = COUNTER_SYNAPSE_ACTION_NONE,
 	[QUAD8_SYNAPSE_ACTION_RISING_EDGE] = COUNTER_SYNAPSE_ACTION_RISING_EDGE,
 	[QUAD8_SYNAPSE_ACTION_FALLING_EDGE] = COUNTER_SYNAPSE_ACTION_FALLING_EDGE,
Signature · 1 line
2.30.2

_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

#21 lore raw

PATCH v10 13/33 counter: ftm-quaddec: Add const qualifier for actions_list array

In reply to William Breathitt Gray

The struct counter_synapse actions_list member expects a const enum counter_synapse_action array. This patch adds the const qualifier to the ftm_quaddec_synapse_actions to match actions_list.

---
 drivers/counter/ftm-quaddec.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/counter/ftm-quaddec.c +1 -1
index c2b3fdfd8b77..9371532406ca 100644
@@ -162,7 +162,7 @@ enum ftm_quaddec_synapse_action {
 	FTM_QUADDEC_SYNAPSE_ACTION_BOTH_EDGES,
 };
 
-static enum counter_synapse_action ftm_quaddec_synapse_actions[] = {
+static const enum counter_synapse_action ftm_quaddec_synapse_actions[] = {
 	[FTM_QUADDEC_SYNAPSE_ACTION_BOTH_EDGES] =
 	COUNTER_SYNAPSE_ACTION_BOTH_EDGES
 };
Signature · 1 line
2.30.2
#22 lore raw

PATCH v10 14/33 counter: interrupt-cnt: Add const qualifier for actions_list array

In reply to William Breathitt Gray

The struct counter_synapse actions_list member expects a const enum counter_synapse_action array. This patch adds the const qualifier to the interrupt_cnt_synapse_actionss to match actions_list.

---
 drivers/counter/interrupt-cnt.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/counter/interrupt-cnt.c +1 -1
index 827d785e19b4..0e07607f2cd3 100644
@@ -77,7 +77,7 @@ static const struct counter_count_ext interrupt_cnt_ext[] = {
 	},
 };
 
-static enum counter_synapse_action interrupt_cnt_synapse_actionss[] = {
+static const enum counter_synapse_action interrupt_cnt_synapse_actionss[] = {
 	COUNTER_SYNAPSE_ACTION_RISING_EDGE,
 };
 
Signature · 1 line
2.30.2
#23 lore raw

PATCH v10 15/33 counter: microchip-tcb-capture: Add const qualifier for actions_list array

In reply to William Breathitt Gray

The struct counter_synapse actions_list member expects a const enum counter_synapse_action array. This patch adds the const qualifier to the mchp_tc_synapse_actions to match actions_list.

---
 drivers/counter/microchip-tcb-capture.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/counter/microchip-tcb-capture.c +1 -1
index cabcfebfc799..51b8af80f98b 100644
@@ -49,7 +49,7 @@ enum mchp_tc_synapse_action {
 	MCHP_TC_SYNAPSE_ACTION_BOTH_EDGE
 };
 
-static enum counter_synapse_action mchp_tc_synapse_actions[] = {
+static const enum counter_synapse_action mchp_tc_synapse_actions[] = {
 	[MCHP_TC_SYNAPSE_ACTION_NONE] = COUNTER_SYNAPSE_ACTION_NONE,
 	[MCHP_TC_SYNAPSE_ACTION_RISING_EDGE] = COUNTER_SYNAPSE_ACTION_RISING_EDGE,
 	[MCHP_TC_SYNAPSE_ACTION_FALLING_EDGE] = COUNTER_SYNAPSE_ACTION_FALLING_EDGE,
Signature · 1 line
2.30.2
#24 lore raw

PATCH v10 16/33 counter: stm32-lptimer-cnt: Add const qualifier for actions_list array

In reply to William Breathitt Gray

The struct counter_synapse actions_list member expects a const enum counter_synapse_action array. This patch adds the const qualifier to the stm32_lptim_cnt_synapse_actions to match actions_list.

---
 drivers/counter/stm32-lptimer-cnt.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/counter/stm32-lptimer-cnt.c +1 -1
index 0f7d3f1ec1b6..c19d998df5ba 100644
@@ -146,7 +146,7 @@ enum stm32_lptim_synapse_action {
 	STM32_LPTIM_SYNAPSE_ACTION_NONE,
 };
 
-static enum counter_synapse_action stm32_lptim_cnt_synapse_actions[] = {
+static const enum counter_synapse_action stm32_lptim_cnt_synapse_actions[] = {
 	/* Index must match with stm32_lptim_cnt_polarity[] (priv->polarity) */
 	[STM32_LPTIM_SYNAPSE_ACTION_RISING_EDGE] = COUNTER_SYNAPSE_ACTION_RISING_EDGE,
 	[STM32_LPTIM_SYNAPSE_ACTION_FALLING_EDGE] = COUNTER_SYNAPSE_ACTION_FALLING_EDGE,
Signature · 1 line
2.30.2
maintainer Reviewed-by on v10 16/33
#25 lore raw

Re: [Linux-stm32] [PATCH v10 16/33] counter: stm32-lptimer-cnt: Add const qualifier for actions_list array

Quoted 9 lines · William Breathitt Gray

The struct counter_synapse actions_list member expects a const enum counter_synapse_action array. This patch adds the const qualifier to the stm32_lptim_cnt_synapse_actions to match actions_list.

---
 drivers/counter/stm32-lptimer-cnt.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Hi William,

You can add my:

Thanks,
Fabrice

Quoted 15 lines
drivers/counter/stm32-lptimer-cnt.c +1 -1
index 0f7d3f1ec1b6..c19d998df5ba 100644
@@ -146,7 +146,7 @@ enum stm32_lptim_synapse_action {
 	STM32_LPTIM_SYNAPSE_ACTION_NONE,
 };
 
-static enum counter_synapse_action stm32_lptim_cnt_synapse_actions[] = {
+static const enum counter_synapse_action stm32_lptim_cnt_synapse_actions[] = {
 	/* Index must match with stm32_lptim_cnt_polarity[] (priv->polarity) */
 	[STM32_LPTIM_SYNAPSE_ACTION_RISING_EDGE] = COUNTER_SYNAPSE_ACTION_RISING_EDGE,
 	[STM32_LPTIM_SYNAPSE_ACTION_FALLING_EDGE] = COUNTER_SYNAPSE_ACTION_FALLING_EDGE,
#26 lore raw

PATCH v10 17/33 counter: stm32-timer-cnt: Add const qualifier for actions_list array

In reply to William Breathitt Gray

The struct counter_synapse actions_list member expects a const enum counter_synapse_action array. This patch adds the const qualifier to the stm32_synapse_actions to match actions_list.

Cc Fabrice Gasnier <[email protected]>
Cc Benjamin Gaignard <[email protected]>
---
 drivers/counter/stm32-timer-cnt.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/counter/stm32-timer-cnt.c +1 -1
index 0c18573a7837..603b30ada839 100644
@@ -267,7 +267,7 @@ enum stm32_synapse_action {
 	STM32_SYNAPSE_ACTION_BOTH_EDGES
 };
 
-static enum counter_synapse_action stm32_synapse_actions[] = {
+static const enum counter_synapse_action stm32_synapse_actions[] = {
 	[STM32_SYNAPSE_ACTION_NONE] = COUNTER_SYNAPSE_ACTION_NONE,
 	[STM32_SYNAPSE_ACTION_BOTH_EDGES] = COUNTER_SYNAPSE_ACTION_BOTH_EDGES
 };
Signature · 1 line
2.30.2
maintainer Reviewed-by on v10 17/33
#27 lore raw

Re: [Linux-stm32] [PATCH v10 17/33] counter: stm32-timer-cnt: Add const qualifier for actions_list array

Quoted 10 lines · William Breathitt Gray

The struct counter_synapse actions_list member expects a const enum counter_synapse_action array. This patch adds the const qualifier to the stm32_synapse_actions to match actions_list.

Cc Fabrice Gasnier <[email protected]>
Cc Benjamin Gaignard <[email protected]>
---
 drivers/counter/stm32-timer-cnt.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Hi William,

You can add my:

Thanks,
Fabrice

Quoted 15 lines
drivers/counter/stm32-timer-cnt.c +1 -1
index 0c18573a7837..603b30ada839 100644
@@ -267,7 +267,7 @@ enum stm32_synapse_action {
 	STM32_SYNAPSE_ACTION_BOTH_EDGES
 };
 
-static enum counter_synapse_action stm32_synapse_actions[] = {
+static const enum counter_synapse_action stm32_synapse_actions[] = {
 	[STM32_SYNAPSE_ACTION_NONE] = COUNTER_SYNAPSE_ACTION_NONE,
 	[STM32_SYNAPSE_ACTION_BOTH_EDGES] = COUNTER_SYNAPSE_ACTION_BOTH_EDGES
 };
#28 lore raw

PATCH v10 18/33 counter: Return error code on invalid modes

In reply to William Breathitt Gray

Only a select set of modes (function, action, etc.) are valid for a given device configuration. This patch ensures that invalid modes result in a return -EINVAL. Such a situation should never occur in reality, but it's good to define a default switch cases for the sake of making the intent of the code clear.

Cc Syed Nayyar Waris <[email protected]>
Cc Kamel Bouhara <[email protected]>
Cc Fabrice Gasnier <[email protected]>
Cc Maxime Coquelin <[email protected]>
Cc Alexandre Torgue <[email protected]>
Cc David Lechner <[email protected]>
---
 drivers/counter/104-quad-8.c            | 20 +++++++----
 drivers/counter/microchip-tcb-capture.c |  6 ++++
 drivers/counter/stm32-lptimer-cnt.c     | 10 +++---
 drivers/counter/ti-eqep.c               | 45 +++++++++++--------------
 4 files changed, 46 insertions(+), 35 deletions(-)
drivers/counter/104-quad-8.c +14 -6
index 09d779544969..b7d6c1c43655 100644
@@ -273,6 +273,10 @@ static int quad8_function_set(struct counter_device *counter,
 			*scale = 2;
 			mode_cfg |= QUAD8_CMR_QUADRATURE_X4;
 			break;
+		default:
+			/* should never reach this path */
+			mutex_unlock(&priv->lock);
+			return -EINVAL;
 		}
 	}
 
@@ -349,7 +353,7 @@ static int quad8_action_get(struct counter_device *counter,
 	case QUAD8_COUNT_FUNCTION_PULSE_DIRECTION:
 		if (synapse->signal->id == signal_a_id)
 			*action = QUAD8_SYNAPSE_ACTION_RISING_EDGE;
-		break;
+		return 0;
 	case QUAD8_COUNT_FUNCTION_QUADRATURE_X1:
 		if (synapse->signal->id == signal_a_id) {
 			quad8_direction_get(counter, count, &direction);
@@ -359,17 +363,18 @@ static int quad8_action_get(struct counter_device *counter,
 			else
 				*action = QUAD8_SYNAPSE_ACTION_FALLING_EDGE;
 		}
-		break;
+		return 0;
 	case QUAD8_COUNT_FUNCTION_QUADRATURE_X2:
 		if (synapse->signal->id == signal_a_id)
 			*action = QUAD8_SYNAPSE_ACTION_BOTH_EDGES;
-		break;
+		return 0;
 	case QUAD8_COUNT_FUNCTION_QUADRATURE_X4:
 		*action = QUAD8_SYNAPSE_ACTION_BOTH_EDGES;
-		break;
+		return 0;
+	default:
+		/* should never reach this path */
+		return -EINVAL;
 	}
-
-	return 0;
 }
 
 static const struct counter_ops quad8_ops = {
@@ -529,6 +534,9 @@ static int quad8_count_mode_set(struct counter_device *counter,
 	case COUNTER_COUNT_MODE_MODULO_N:
 		cnt_mode = 3;
 		break;
+	default:
+		/* should never reach this path */
+		return -EINVAL;
 	}
 
 	mutex_lock(&priv->lock);
drivers/counter/microchip-tcb-capture.c +6 -0
index 51b8af80f98b..0c9a61962911 100644
@@ -133,6 +133,9 @@ static int mchp_tc_count_function_set(struct counter_device *counter,
 		bmr |= ATMEL_TC_QDEN | ATMEL_TC_POSEN;
 		cmr |= ATMEL_TC_ETRGEDG_RISING | ATMEL_TC_ABETRG | ATMEL_TC_XC0;
 		break;
+	default:
+		/* should never reach this path */
+		return -EINVAL;
 	}
 
 	regmap_write(priv->regmap, ATMEL_TC_BMR, bmr);
@@ -226,6 +229,9 @@ static int mchp_tc_count_action_set(struct counter_device *counter,
 	case MCHP_TC_SYNAPSE_ACTION_BOTH_EDGE:
 		edge = ATMEL_TC_ETRGEDG_BOTH;
 		break;
+	default:
+		/* should never reach this path */
+		return -EINVAL;
 	}
 
 	return regmap_write_bits(priv->regmap,
drivers/counter/stm32-lptimer-cnt.c +6 -4
index c19d998df5ba..78f383b77bd2 100644
@@ -206,9 +206,10 @@ static int stm32_lptim_cnt_function_set(struct counter_device *counter,
 		priv->quadrature_mode = 1;
 		priv->polarity = STM32_LPTIM_SYNAPSE_ACTION_BOTH_EDGES;
 		return 0;
+	default:
+		/* should never reach this path */
+		return -EINVAL;
 	}
-
-	return -EINVAL;
 }
 
 static ssize_t stm32_lptim_cnt_enable_read(struct counter_device *counter,
@@ -326,9 +327,10 @@ static int stm32_lptim_cnt_action_get(struct counter_device *counter,
 	case STM32_LPTIM_ENCODER_BOTH_EDGE:
 		*action = priv->polarity;
 		return 0;
+	default:
+		/* should never reach this path */
+		return -EINVAL;
 	}
-
-	return -EINVAL;
 }
 
 static int stm32_lptim_cnt_action_set(struct counter_device *counter,
drivers/counter/ti-eqep.c +20 -25

64 lines not on this page · raw message

Signature · 1 line
2.30.2
maintainer Reviewed-by on v10 18/33
#29 lore raw

Re: [Linux-stm32] [PATCH v10 18/33] counter: Return error code on invalid modes

Quoted 13 lines · William Breathitt Gray

Only a select set of modes (function, action, etc.) are valid for a given device configuration. This patch ensures that invalid modes result in a return -EINVAL. Such a situation should never occur in reality, but it's good to define a default switch cases for the sake of making the intent of the code clear.

Cc Syed Nayyar Waris <[email protected]>
Cc Kamel Bouhara <[email protected]>
Cc Fabrice Gasnier <[email protected]>
Cc Maxime Coquelin <[email protected]>
Cc Alexandre Torgue <[email protected]>
Cc David Lechner <[email protected]>
Quoted 4 lines
---
 drivers/counter/104-quad-8.c            | 20 +++++++----
 drivers/counter/microchip-tcb-capture.c |  6 ++++
 drivers/counter/stm32-lptimer-cnt.c     | 10 +++---

Hi William,

Fro the STM32 driver, You can add my:

Thanks,
Fabrice

Quoted 185 lines
 drivers/counter/ti-eqep.c               | 45 +++++++++++--------------
 4 files changed, 46 insertions(+), 35 deletions(-)
drivers/counter/104-quad-8.c +14 -6
index 09d779544969..b7d6c1c43655 100644
@@ -273,6 +273,10 @@ static int quad8_function_set(struct counter_device *counter,
 			*scale = 2;
 			mode_cfg |= QUAD8_CMR_QUADRATURE_X4;
 			break;
+		default:
+			/* should never reach this path */
+			mutex_unlock(&priv->lock);
+			return -EINVAL;
 		}
 	}
 
@@ -349,7 +353,7 @@ static int quad8_action_get(struct counter_device *counter,
 	case QUAD8_COUNT_FUNCTION_PULSE_DIRECTION:
 		if (synapse->signal->id == signal_a_id)
 			*action = QUAD8_SYNAPSE_ACTION_RISING_EDGE;
-		break;
+		return 0;
 	case QUAD8_COUNT_FUNCTION_QUADRATURE_X1:
 		if (synapse->signal->id == signal_a_id) {
 			quad8_direction_get(counter, count, &direction);
@@ -359,17 +363,18 @@ static int quad8_action_get(struct counter_device *counter,
 			else
 				*action = QUAD8_SYNAPSE_ACTION_FALLING_EDGE;
 		}
-		break;
+		return 0;
 	case QUAD8_COUNT_FUNCTION_QUADRATURE_X2:
 		if (synapse->signal->id == signal_a_id)
 			*action = QUAD8_SYNAPSE_ACTION_BOTH_EDGES;
-		break;
+		return 0;
 	case QUAD8_COUNT_FUNCTION_QUADRATURE_X4:
 		*action = QUAD8_SYNAPSE_ACTION_BOTH_EDGES;
-		break;
+		return 0;
+	default:
+		/* should never reach this path */
+		return -EINVAL;
 	}
-
-	return 0;
 }
 
 static const struct counter_ops quad8_ops = {
@@ -529,6 +534,9 @@ static int quad8_count_mode_set(struct counter_device *counter,
 	case COUNTER_COUNT_MODE_MODULO_N:
 		cnt_mode = 3;
 		break;
+	default:
+		/* should never reach this path */
+		return -EINVAL;
 	}
 
 	mutex_lock(&priv->lock);
drivers/counter/microchip-tcb-capture.c +6 -0
index 51b8af80f98b..0c9a61962911 100644
@@ -133,6 +133,9 @@ static int mchp_tc_count_function_set(struct counter_device *counter,
 		bmr |= ATMEL_TC_QDEN | ATMEL_TC_POSEN;
 		cmr |= ATMEL_TC_ETRGEDG_RISING | ATMEL_TC_ABETRG | ATMEL_TC_XC0;
 		break;
+	default:
+		/* should never reach this path */
+		return -EINVAL;
 	}
 
 	regmap_write(priv->regmap, ATMEL_TC_BMR, bmr);
@@ -226,6 +229,9 @@ static int mchp_tc_count_action_set(struct counter_device *counter,
 	case MCHP_TC_SYNAPSE_ACTION_BOTH_EDGE:
 		edge = ATMEL_TC_ETRGEDG_BOTH;
 		break;
+	default:
+		/* should never reach this path */
+		return -EINVAL;
 	}
 
 	return regmap_write_bits(priv->regmap,
drivers/counter/stm32-lptimer-cnt.c +6 -4
index c19d998df5ba..78f383b77bd2 100644
@@ -206,9 +206,10 @@ static int stm32_lptim_cnt_function_set(struct counter_device *counter,
 		priv->quadrature_mode = 1;
 		priv->polarity = STM32_LPTIM_SYNAPSE_ACTION_BOTH_EDGES;
 		return 0;
+	default:
+		/* should never reach this path */
+		return -EINVAL;
 	}
-
-	return -EINVAL;
 }
 
 static ssize_t stm32_lptim_cnt_enable_read(struct counter_device *counter,
@@ -326,9 +327,10 @@ static int stm32_lptim_cnt_action_get(struct counter_device *counter,
 	case STM32_LPTIM_ENCODER_BOTH_EDGE:
 		*action = priv->polarity;
 		return 0;
+	default:
+		/* should never reach this path */
+		return -EINVAL;
 	}
-
-	return -EINVAL;
 }
 
 static int stm32_lptim_cnt_action_set(struct counter_device *counter,
drivers/counter/ti-eqep.c +20 -25
index 65df9ef5b5bc..878725c2f010 100644
@@ -157,44 +157,39 @@ static int ti_eqep_action_get(struct counter_device *counter,
 		 * QEPA and QEPB trigger QCLK.
 		 */
 		*action = TI_EQEP_SYNAPSE_ACTION_BOTH_EDGES;
-		break;
+		return 0;
 	case TI_EQEP_COUNT_FUNC_DIR_COUNT:
 		/* In direction-count mode only rising edge of QEPA is counted
 		 * and QEPB gives direction.
 		 */
-		switch (synapse->signal->id) {
-		case TI_EQEP_SIGNAL_QEPA:
-			*action = TI_EQEP_SYNAPSE_ACTION_RISING_EDGE;
-			break;
-		default:
+		if (synapse->signal->id == TI_EQEP_SIGNAL_QEPB)
 			*action = TI_EQEP_SYNAPSE_ACTION_NONE;
-			break;
-		}
-		break;
+		else
+			*action = TI_EQEP_SYNAPSE_ACTION_RISING_EDGE;
+		return 0;
 	case TI_EQEP_COUNT_FUNC_UP_COUNT:
 	case TI_EQEP_COUNT_FUNC_DOWN_COUNT:
 		/* In up/down-count modes only QEPA is counted and QEPB is not
 		 * used.
 		 */
-		switch (synapse->signal->id) {
-		case TI_EQEP_SIGNAL_QEPA:
-			err = regmap_read(priv->regmap16, QDECCTL, &qdecctl);
-			if (err)
-				return err;
-
-			if (qdecctl & QDECCTL_XCR)
-				*action = TI_EQEP_SYNAPSE_ACTION_BOTH_EDGES;
-			else
-				*action = TI_EQEP_SYNAPSE_ACTION_RISING_EDGE;
-			break;
-		default:
+		if (synapse->signal->id == TI_EQEP_SIGNAL_QEPB) {
 			*action = TI_EQEP_SYNAPSE_ACTION_NONE;
-			break;
+			return 0;
 		}
-		break;
-	}
 
-	return 0;
+		err = regmap_read(priv->regmap16, QDECCTL, &qdecctl);
+		if (err)
+			return err;
+
+		if (qdecctl & QDECCTL_XCR)
+			*action = TI_EQEP_SYNAPSE_ACTION_BOTH_EDGES;
+		else
+			*action = TI_EQEP_SYNAPSE_ACTION_RISING_EDGE;
+		return 0;
+	default:
+		/* should never reach this path */
+		return -EINVAL;
+	}
 }
 
 static const struct counter_ops ti_eqep_counter_ops = {
Acked-by on v10 18/33
#30 lore raw

Re: [PATCH v10 18/33] counter: Return error code on invalid modes

In reply to William Breathitt Gray
Quoted 13 lines · William Breathitt Gray

Only a select set of modes (function, action, etc.) are valid for a given device configuration. This patch ensures that invalid modes result in a return -EINVAL. Such a situation should never occur in reality, but it's good to define a default switch cases for the sake of making the intent of the code clear.

Cc Syed Nayyar Waris <[email protected]>
Cc Kamel Bouhara <[email protected]>
Cc Fabrice Gasnier <[email protected]>
Cc Maxime Coquelin <[email protected]>
Cc Alexandre Torgue <[email protected]>
Cc David Lechner <[email protected]>
Quoted 2 lines
---
 drivers/counter/104-quad-8.c            | 20 +++++++----

For the 104-quad-8 driver:

Quoted 189 lines
 drivers/counter/microchip-tcb-capture.c |  6 ++++
 drivers/counter/stm32-lptimer-cnt.c     | 10 +++---
 drivers/counter/ti-eqep.c               | 45 +++++++++++--------------
 4 files changed, 46 insertions(+), 35 deletions(-)
drivers/counter/104-quad-8.c +14 -6
index 09d779544969..b7d6c1c43655 100644
@@ -273,6 +273,10 @@ static int quad8_function_set(struct counter_device *counter,
 			*scale = 2;
 			mode_cfg |= QUAD8_CMR_QUADRATURE_X4;
 			break;
+		default:
+			/* should never reach this path */
+			mutex_unlock(&priv->lock);
+			return -EINVAL;
 		}
 	}
 
@@ -349,7 +353,7 @@ static int quad8_action_get(struct counter_device *counter,
 	case QUAD8_COUNT_FUNCTION_PULSE_DIRECTION:
 		if (synapse->signal->id == signal_a_id)
 			*action = QUAD8_SYNAPSE_ACTION_RISING_EDGE;
-		break;
+		return 0;
 	case QUAD8_COUNT_FUNCTION_QUADRATURE_X1:
 		if (synapse->signal->id == signal_a_id) {
 			quad8_direction_get(counter, count, &direction);
@@ -359,17 +363,18 @@ static int quad8_action_get(struct counter_device *counter,
 			else
 				*action = QUAD8_SYNAPSE_ACTION_FALLING_EDGE;
 		}
-		break;
+		return 0;
 	case QUAD8_COUNT_FUNCTION_QUADRATURE_X2:
 		if (synapse->signal->id == signal_a_id)
 			*action = QUAD8_SYNAPSE_ACTION_BOTH_EDGES;
-		break;
+		return 0;
 	case QUAD8_COUNT_FUNCTION_QUADRATURE_X4:
 		*action = QUAD8_SYNAPSE_ACTION_BOTH_EDGES;
-		break;
+		return 0;
+	default:
+		/* should never reach this path */
+		return -EINVAL;
 	}
-
-	return 0;
 }
 
 static const struct counter_ops quad8_ops = {
@@ -529,6 +534,9 @@ static int quad8_count_mode_set(struct counter_device *counter,
 	case COUNTER_COUNT_MODE_MODULO_N:
 		cnt_mode = 3;
 		break;
+	default:
+		/* should never reach this path */
+		return -EINVAL;
 	}
 
 	mutex_lock(&priv->lock);
drivers/counter/microchip-tcb-capture.c +6 -0
index 51b8af80f98b..0c9a61962911 100644
@@ -133,6 +133,9 @@ static int mchp_tc_count_function_set(struct counter_device *counter,
 		bmr |= ATMEL_TC_QDEN | ATMEL_TC_POSEN;
 		cmr |= ATMEL_TC_ETRGEDG_RISING | ATMEL_TC_ABETRG | ATMEL_TC_XC0;
 		break;
+	default:
+		/* should never reach this path */
+		return -EINVAL;
 	}
 
 	regmap_write(priv->regmap, ATMEL_TC_BMR, bmr);
@@ -226,6 +229,9 @@ static int mchp_tc_count_action_set(struct counter_device *counter,
 	case MCHP_TC_SYNAPSE_ACTION_BOTH_EDGE:
 		edge = ATMEL_TC_ETRGEDG_BOTH;
 		break;
+	default:
+		/* should never reach this path */
+		return -EINVAL;
 	}
 
 	return regmap_write_bits(priv->regmap,
drivers/counter/stm32-lptimer-cnt.c +6 -4
index c19d998df5ba..78f383b77bd2 100644
@@ -206,9 +206,10 @@ static int stm32_lptim_cnt_function_set(struct counter_device *counter,
 		priv->quadrature_mode = 1;
 		priv->polarity = STM32_LPTIM_SYNAPSE_ACTION_BOTH_EDGES;
 		return 0;
+	default:
+		/* should never reach this path */
+		return -EINVAL;
 	}
-
-	return -EINVAL;
 }
 
 static ssize_t stm32_lptim_cnt_enable_read(struct counter_device *counter,
@@ -326,9 +327,10 @@ static int stm32_lptim_cnt_action_get(struct counter_device *counter,
 	case STM32_LPTIM_ENCODER_BOTH_EDGE:
 		*action = priv->polarity;
 		return 0;
+	default:
+		/* should never reach this path */
+		return -EINVAL;
 	}
-
-	return -EINVAL;
 }
 
 static int stm32_lptim_cnt_action_set(struct counter_device *counter,
drivers/counter/ti-eqep.c +20 -25
index 65df9ef5b5bc..878725c2f010 100644
@@ -157,44 +157,39 @@ static int ti_eqep_action_get(struct counter_device *counter,
 		 * QEPA and QEPB trigger QCLK.
 		 */
 		*action = TI_EQEP_SYNAPSE_ACTION_BOTH_EDGES;
-		break;
+		return 0;
 	case TI_EQEP_COUNT_FUNC_DIR_COUNT:
 		/* In direction-count mode only rising edge of QEPA is counted
 		 * and QEPB gives direction.
 		 */
-		switch (synapse->signal->id) {
-		case TI_EQEP_SIGNAL_QEPA:
-			*action = TI_EQEP_SYNAPSE_ACTION_RISING_EDGE;
-			break;
-		default:
+		if (synapse->signal->id == TI_EQEP_SIGNAL_QEPB)
 			*action = TI_EQEP_SYNAPSE_ACTION_NONE;
-			break;
-		}
-		break;
+		else
+			*action = TI_EQEP_SYNAPSE_ACTION_RISING_EDGE;
+		return 0;
 	case TI_EQEP_COUNT_FUNC_UP_COUNT:
 	case TI_EQEP_COUNT_FUNC_DOWN_COUNT:
 		/* In up/down-count modes only QEPA is counted and QEPB is not
 		 * used.
 		 */
-		switch (synapse->signal->id) {
-		case TI_EQEP_SIGNAL_QEPA:
-			err = regmap_read(priv->regmap16, QDECCTL, &qdecctl);
-			if (err)
-				return err;
-
-			if (qdecctl & QDECCTL_XCR)
-				*action = TI_EQEP_SYNAPSE_ACTION_BOTH_EDGES;
-			else
-				*action = TI_EQEP_SYNAPSE_ACTION_RISING_EDGE;
-			break;
-		default:
+		if (synapse->signal->id == TI_EQEP_SIGNAL_QEPB) {
 			*action = TI_EQEP_SYNAPSE_ACTION_NONE;
-			break;
+			return 0;
 		}
-		break;
-	}
 
-	return 0;
+		err = regmap_read(priv->regmap16, QDECCTL, &qdecctl);
+		if (err)
+			return err;
+
+		if (qdecctl & QDECCTL_XCR)
+			*action = TI_EQEP_SYNAPSE_ACTION_BOTH_EDGES;
+		else
+			*action = TI_EQEP_SYNAPSE_ACTION_RISING_EDGE;
+		return 0;
+	default:
+		/* should never reach this path */
+		return -EINVAL;
+	}
 }
 
 static const struct counter_ops ti_eqep_counter_ops = {
Signature · 1 line
2.30.2
#31 lore raw

PATCH v10 19/33 counter: Standardize to ERANGE for limit exceeded errors

In reply to William Breathitt Gray

ERANGE is a semantically better error code to return when an argument value falls outside the supported limit range of a device.

Cc Syed Nayyar Waris <[email protected]>
Cc Oleksij Rempel <[email protected]>
Cc Fabrice Gasnier <[email protected]>
Cc Maxime Coquelin <[email protected]>
Cc Alexandre Torgue <[email protected]>
---
 drivers/counter/104-quad-8.c        | 6 +++---
 drivers/counter/interrupt-cnt.c     | 3 +++
 drivers/counter/stm32-lptimer-cnt.c | 2 +-
 3 files changed, 7 insertions(+), 4 deletions(-)
drivers/counter/104-quad-8.c +3 -3
index b7d6c1c43655..0409b1771fd9 100644
@@ -154,7 +154,7 @@ static int quad8_count_write(struct counter_device *counter,
 
 	/* Only 24-bit values are supported */
 	if (val > 0xFFFFFF)
-		return -EINVAL;
+		return -ERANGE;
 
 	mutex_lock(&priv->lock);
 
@@ -669,7 +669,7 @@ static ssize_t quad8_count_preset_write(struct counter_device *counter,
 
 	/* Only 24-bit values are supported */
 	if (preset > 0xFFFFFF)
-		return -EINVAL;
+		return -ERANGE;
 
 	mutex_lock(&priv->lock);
 
@@ -714,7 +714,7 @@ static ssize_t quad8_count_ceiling_write(struct counter_device *counter,
 
 	/* Only 24-bit values are supported */
 	if (ceiling > 0xFFFFFF)
-		return -EINVAL;
+		return -ERANGE;
 
 	mutex_lock(&priv->lock);
 
drivers/counter/interrupt-cnt.c +3 -0
index 0e07607f2cd3..f27dea317965 100644
@@ -107,6 +107,9 @@ static int interrupt_cnt_write(struct counter_device *counter,
 {
 	struct interrupt_cnt_priv *priv = counter->priv;
 
+	if (val != (typeof(priv->count.counter))val)
+		return -ERANGE;
+
 	atomic_set(&priv->count, val);
 
 	return 0;
drivers/counter/stm32-lptimer-cnt.c +1 -1
index 78f383b77bd2..49aeb9e393f3 100644
@@ -283,7 +283,7 @@ static ssize_t stm32_lptim_cnt_ceiling_write(struct counter_device *counter,
 		return ret;
 
 	if (ceiling > STM32_LPTIM_MAX_ARR)
-		return -EINVAL;
+		return -ERANGE;
 
 	priv->ceiling = ceiling;
 
Signature · 1 line
2.30.2
maintainer Reviewed-by on v10 19/33
#32 lore raw

Re: [Linux-stm32] [PATCH v10 19/33] counter: Standardize to ERANGE for limit exceeded errors

Quoted 10 lines · William Breathitt Gray

ERANGE is a semantically better error code to return when an argument value falls outside the supported limit range of a device.

Cc Syed Nayyar Waris <[email protected]>
Cc Oleksij Rempel <[email protected]>
Cc Fabrice Gasnier <[email protected]>
Cc Maxime Coquelin <[email protected]>
Cc Alexandre Torgue <[email protected]>
Quoted 5 lines
---
 drivers/counter/104-quad-8.c        | 6 +++---
 drivers/counter/interrupt-cnt.c     | 3 +++
 drivers/counter/stm32-lptimer-cnt.c | 2 +-
 3 files changed, 7 insertions(+), 4 deletions(-)

Hi William,

For the STM32 driver, you can add my:

Thanks,
Fabrice

Quoted 60 lines
drivers/counter/104-quad-8.c +3 -3
index b7d6c1c43655..0409b1771fd9 100644
@@ -154,7 +154,7 @@ static int quad8_count_write(struct counter_device *counter,
 
 	/* Only 24-bit values are supported */
 	if (val > 0xFFFFFF)
-		return -EINVAL;
+		return -ERANGE;
 
 	mutex_lock(&priv->lock);
 
@@ -669,7 +669,7 @@ static ssize_t quad8_count_preset_write(struct counter_device *counter,
 
 	/* Only 24-bit values are supported */
 	if (preset > 0xFFFFFF)
-		return -EINVAL;
+		return -ERANGE;
 
 	mutex_lock(&priv->lock);
 
@@ -714,7 +714,7 @@ static ssize_t quad8_count_ceiling_write(struct counter_device *counter,
 
 	/* Only 24-bit values are supported */
 	if (ceiling > 0xFFFFFF)
-		return -EINVAL;
+		return -ERANGE;
 
 	mutex_lock(&priv->lock);
 
drivers/counter/interrupt-cnt.c +3 -0
index 0e07607f2cd3..f27dea317965 100644
@@ -107,6 +107,9 @@ static int interrupt_cnt_write(struct counter_device *counter,
 {
 	struct interrupt_cnt_priv *priv = counter->priv;
 
+	if (val != (typeof(priv->count.counter))val)
+		return -ERANGE;
+
 	atomic_set(&priv->count, val);
 
 	return 0;
drivers/counter/stm32-lptimer-cnt.c +1 -1
index 78f383b77bd2..49aeb9e393f3 100644
@@ -283,7 +283,7 @@ static ssize_t stm32_lptim_cnt_ceiling_write(struct counter_device *counter,
 		return ret;
 
 	if (ceiling > STM32_LPTIM_MAX_ARR)
-		return -EINVAL;
+		return -ERANGE;
 
 	priv->ceiling = ceiling;
 
Acked-by on v10 19/33
#33 lore raw

Re: [PATCH v10 19/33] counter: Standardize to ERANGE for limit exceeded errors

In reply to William Breathitt Gray
Quoted 10 lines · William Breathitt Gray

ERANGE is a semantically better error code to return when an argument value falls outside the supported limit range of a device.

Cc Syed Nayyar Waris <[email protected]>
Cc Oleksij Rempel <[email protected]>
Cc Fabrice Gasnier <[email protected]>
Cc Maxime Coquelin <[email protected]>
Cc Alexandre Torgue <[email protected]>
Quoted 2 lines
---
 drivers/counter/104-quad-8.c        | 6 +++---

For the 104-quad-8 driver:

Quoted 65 lines
 drivers/counter/interrupt-cnt.c     | 3 +++
 drivers/counter/stm32-lptimer-cnt.c | 2 +-
 3 files changed, 7 insertions(+), 4 deletions(-)
drivers/counter/104-quad-8.c +3 -3
index b7d6c1c43655..0409b1771fd9 100644
@@ -154,7 +154,7 @@ static int quad8_count_write(struct counter_device *counter,
 
 	/* Only 24-bit values are supported */
 	if (val > 0xFFFFFF)
-		return -EINVAL;
+		return -ERANGE;
 
 	mutex_lock(&priv->lock);
 
@@ -669,7 +669,7 @@ static ssize_t quad8_count_preset_write(struct counter_device *counter,
 
 	/* Only 24-bit values are supported */
 	if (preset > 0xFFFFFF)
-		return -EINVAL;
+		return -ERANGE;
 
 	mutex_lock(&priv->lock);
 
@@ -714,7 +714,7 @@ static ssize_t quad8_count_ceiling_write(struct counter_device *counter,
 
 	/* Only 24-bit values are supported */
 	if (ceiling > 0xFFFFFF)
-		return -EINVAL;
+		return -ERANGE;
 
 	mutex_lock(&priv->lock);
 
drivers/counter/interrupt-cnt.c +3 -0
index 0e07607f2cd3..f27dea317965 100644
@@ -107,6 +107,9 @@ static int interrupt_cnt_write(struct counter_device *counter,
 {
 	struct interrupt_cnt_priv *priv = counter->priv;
 
+	if (val != (typeof(priv->count.counter))val)
+		return -ERANGE;
+
 	atomic_set(&priv->count, val);
 
 	return 0;
drivers/counter/stm32-lptimer-cnt.c +1 -1
index 78f383b77bd2..49aeb9e393f3 100644
@@ -283,7 +283,7 @@ static ssize_t stm32_lptim_cnt_ceiling_write(struct counter_device *counter,
 		return ret;
 
 	if (ceiling > STM32_LPTIM_MAX_ARR)
-		return -EINVAL;
+		return -ERANGE;
 
 	priv->ceiling = ceiling;
 
Signature · 1 line
2.30.2
#34 lore raw

PATCH v10 20/33 counter: Rename counter_signal_value to counter_signal_level

In reply to William Breathitt Gray

Signal values will always be levels so let's be explicit it about it to make the intent of the code clear.

Cc Syed Nayyar Waris <[email protected]>
Cc Oleksij Rempel <[email protected]>
Cc Kamel Bouhara <[email protected]>
---
 drivers/counter/104-quad-8.c            |  5 +++--
 drivers/counter/counter.c               | 12 ++++++------
 drivers/counter/interrupt-cnt.c         |  4 ++--
 drivers/counter/microchip-tcb-capture.c |  4 ++--
 include/linux/counter.h                 | 12 ++++++------
 5 files changed, 19 insertions(+), 18 deletions(-)
drivers/counter/104-quad-8.c +3 -2
index 0409b1771fd9..fb0f021c0751 100644
@@ -97,7 +97,8 @@ struct quad8 {
 #define QUAD8_CMR_QUADRATURE_X4 0x18
 
 static int quad8_signal_read(struct counter_device *counter,
-	struct counter_signal *signal, enum counter_signal_value *val)
+			     struct counter_signal *signal,
+			     enum counter_signal_level *level)
 {
 	const struct quad8 *const priv = counter->priv;
 	unsigned int state;
@@ -109,7 +110,7 @@ static int quad8_signal_read(struct counter_device *counter,
 	state = inb(priv->base + QUAD8_REG_INDEX_INPUT_LEVELS)
 		& BIT(signal->id - 16);
 
-	*val = (state) ? COUNTER_SIGNAL_HIGH : COUNTER_SIGNAL_LOW;
+	*level = (state) ? COUNTER_SIGNAL_LEVEL_HIGH : COUNTER_SIGNAL_LEVEL_LOW;
 
 	return 0;
 }
drivers/counter/counter.c +6 -6
index 6a683d086008..cb92673552b5 100644
@@ -289,9 +289,9 @@ struct counter_signal_unit {
 	struct counter_signal *signal;
 };
 
-static const char *const counter_signal_value_str[] = {
-	[COUNTER_SIGNAL_LOW] = "low",
-	[COUNTER_SIGNAL_HIGH] = "high"
+static const char *const counter_signal_level_str[] = {
+	[COUNTER_SIGNAL_LEVEL_LOW] = "low",
+	[COUNTER_SIGNAL_LEVEL_HIGH] = "high"
 };
 
 static ssize_t counter_signal_show(struct device *dev,
@@ -302,13 +302,13 @@ static ssize_t counter_signal_show(struct device *dev,
 	const struct counter_signal_unit *const component = devattr->component;
 	struct counter_signal *const signal = component->signal;
 	int err;
-	enum counter_signal_value val;
+	enum counter_signal_level level;
 
-	err = counter->ops->signal_read(counter, signal, &val);
+	err = counter->ops->signal_read(counter, signal, &level);
 	if (err)
 		return err;
 
-	return sprintf(buf, "%s\n", counter_signal_value_str[val]);
+	return sprintf(buf, "%s\n", counter_signal_level_str[level]);
 }
 
 struct counter_name_unit {
drivers/counter/interrupt-cnt.c +2 -2
index f27dea317965..cce579c1c6ae 100644
@@ -130,7 +130,7 @@ static int interrupt_cnt_function_get(struct counter_device *counter,
 
 static int interrupt_cnt_signal_read(struct counter_device *counter,
 				     struct counter_signal *signal,
-				     enum counter_signal_value *val)
+				     enum counter_signal_level *level)
 {
 	struct interrupt_cnt_priv *priv = counter->priv;
 	int ret;
@@ -142,7 +142,7 @@ static int interrupt_cnt_signal_read(struct counter_device *counter,
 	if (ret < 0)
 		return ret;
 
-	*val = ret ? COUNTER_SIGNAL_HIGH : COUNTER_SIGNAL_LOW;
+	*level = ret ? COUNTER_SIGNAL_LEVEL_HIGH : COUNTER_SIGNAL_LEVEL_LOW;
 
 	return 0;
 }
drivers/counter/microchip-tcb-capture.c +2 -2
index 0c9a61962911..6be3adf74114 100644
@@ -158,7 +158,7 @@ static int mchp_tc_count_function_set(struct counter_device *counter,
 
 static int mchp_tc_count_signal_read(struct counter_device *counter,
 				     struct counter_signal *signal,
-				     enum counter_signal_value *val)
+				     enum counter_signal_level *lvl)
 {
 	struct mchp_tc_data *const priv = counter->priv;
 	bool sigstatus;
@@ -171,7 +171,7 @@ static int mchp_tc_count_signal_read(struct counter_device *counter,
 	else
 		sigstatus = (sr & ATMEL_TC_MTIOA);
 
-	*val = sigstatus ? COUNTER_SIGNAL_HIGH : COUNTER_SIGNAL_LOW;
+	*lvl = sigstatus ? COUNTER_SIGNAL_LEVEL_HIGH : COUNTER_SIGNAL_LEVEL_LOW;
 
 	return 0;
 }
include/linux/counter.h +6 -6
index 9dbd5df4cd34..79f5dcaf6ba0 100644
@@ -290,16 +290,16 @@ struct counter_device_state {
 	const struct attribute_group **groups;
 };
 
-enum counter_signal_value {
-	COUNTER_SIGNAL_LOW = 0,
-	COUNTER_SIGNAL_HIGH
+enum counter_signal_level {
+	COUNTER_SIGNAL_LEVEL_LOW,
+	COUNTER_SIGNAL_LEVEL_HIGH,
 };
 
 /**
  * struct counter_ops - Callbacks from driver
  * @signal_read:	optional read callback for Signal attribute. The read
- *			value of the respective Signal should be passed back via
- *			the val parameter.
+ *			level of the respective Signal should be passed back via
+ *			the level parameter.
  * @count_read:		optional read callback for Count attribute. The read
  *			value of the respective Count should be passed back via
  *			the val parameter.
@@ -324,7 +324,7 @@ enum counter_signal_value {
 struct counter_ops {
 	int (*signal_read)(struct counter_device *counter,
 			   struct counter_signal *signal,
-			   enum counter_signal_value *val);
+			   enum counter_signal_level *level);
 	int (*count_read)(struct counter_device *counter,
 			  struct counter_count *count, unsigned long *val);
 	int (*count_write)(struct counter_device *counter,
Signature · 1 line
2.30.2
Acked-by on v10 20/33
#35 lore raw

Re: [PATCH v10 20/33] counter: Rename counter_signal_value to counter_signal_level

Quoted 10 lines · William Breathitt Gray

Signal values will always be levels so let's be explicit it about it to make the intent of the code clear.

Cc Syed Nayyar Waris <[email protected]>
Cc Oleksij Rempel <[email protected]>
Cc Kamel Bouhara <[email protected]>
---
 drivers/counter/104-quad-8.c            |  5 +++--

For the 104-quad-8 driver:

Quoted 145 lines
 drivers/counter/counter.c               | 12 ++++++------
 drivers/counter/interrupt-cnt.c         |  4 ++--
 drivers/counter/microchip-tcb-capture.c |  4 ++--
 include/linux/counter.h                 | 12 ++++++------
 5 files changed, 19 insertions(+), 18 deletions(-)
drivers/counter/104-quad-8.c +3 -2
index 0409b1771fd9..fb0f021c0751 100644
@@ -97,7 +97,8 @@ struct quad8 {
 #define QUAD8_CMR_QUADRATURE_X4 0x18
 
 static int quad8_signal_read(struct counter_device *counter,
-	struct counter_signal *signal, enum counter_signal_value *val)
+			     struct counter_signal *signal,
+			     enum counter_signal_level *level)
 {
 	const struct quad8 *const priv = counter->priv;
 	unsigned int state;
@@ -109,7 +110,7 @@ static int quad8_signal_read(struct counter_device *counter,
 	state = inb(priv->base + QUAD8_REG_INDEX_INPUT_LEVELS)
 		& BIT(signal->id - 16);
 
-	*val = (state) ? COUNTER_SIGNAL_HIGH : COUNTER_SIGNAL_LOW;
+	*level = (state) ? COUNTER_SIGNAL_LEVEL_HIGH : COUNTER_SIGNAL_LEVEL_LOW;
 
 	return 0;
 }
drivers/counter/counter.c +6 -6
index 6a683d086008..cb92673552b5 100644
@@ -289,9 +289,9 @@ struct counter_signal_unit {
 	struct counter_signal *signal;
 };
 
-static const char *const counter_signal_value_str[] = {
-	[COUNTER_SIGNAL_LOW] = "low",
-	[COUNTER_SIGNAL_HIGH] = "high"
+static const char *const counter_signal_level_str[] = {
+	[COUNTER_SIGNAL_LEVEL_LOW] = "low",
+	[COUNTER_SIGNAL_LEVEL_HIGH] = "high"
 };
 
 static ssize_t counter_signal_show(struct device *dev,
@@ -302,13 +302,13 @@ static ssize_t counter_signal_show(struct device *dev,
 	const struct counter_signal_unit *const component = devattr->component;
 	struct counter_signal *const signal = component->signal;
 	int err;
-	enum counter_signal_value val;
+	enum counter_signal_level level;
 
-	err = counter->ops->signal_read(counter, signal, &val);
+	err = counter->ops->signal_read(counter, signal, &level);
 	if (err)
 		return err;
 
-	return sprintf(buf, "%s\n", counter_signal_value_str[val]);
+	return sprintf(buf, "%s\n", counter_signal_level_str[level]);
 }
 
 struct counter_name_unit {
drivers/counter/interrupt-cnt.c +2 -2
index f27dea317965..cce579c1c6ae 100644
@@ -130,7 +130,7 @@ static int interrupt_cnt_function_get(struct counter_device *counter,
 
 static int interrupt_cnt_signal_read(struct counter_device *counter,
 				     struct counter_signal *signal,
-				     enum counter_signal_value *val)
+				     enum counter_signal_level *level)
 {
 	struct interrupt_cnt_priv *priv = counter->priv;
 	int ret;
@@ -142,7 +142,7 @@ static int interrupt_cnt_signal_read(struct counter_device *counter,
 	if (ret < 0)
 		return ret;
 
-	*val = ret ? COUNTER_SIGNAL_HIGH : COUNTER_SIGNAL_LOW;
+	*level = ret ? COUNTER_SIGNAL_LEVEL_HIGH : COUNTER_SIGNAL_LEVEL_LOW;
 
 	return 0;
 }
drivers/counter/microchip-tcb-capture.c +2 -2
index 0c9a61962911..6be3adf74114 100644
@@ -158,7 +158,7 @@ static int mchp_tc_count_function_set(struct counter_device *counter,
 
 static int mchp_tc_count_signal_read(struct counter_device *counter,
 				     struct counter_signal *signal,
-				     enum counter_signal_value *val)
+				     enum counter_signal_level *lvl)
 {
 	struct mchp_tc_data *const priv = counter->priv;
 	bool sigstatus;
@@ -171,7 +171,7 @@ static int mchp_tc_count_signal_read(struct counter_device *counter,
 	else
 		sigstatus = (sr & ATMEL_TC_MTIOA);
 
-	*val = sigstatus ? COUNTER_SIGNAL_HIGH : COUNTER_SIGNAL_LOW;
+	*lvl = sigstatus ? COUNTER_SIGNAL_LEVEL_HIGH : COUNTER_SIGNAL_LEVEL_LOW;
 
 	return 0;
 }
include/linux/counter.h +6 -6
index 9dbd5df4cd34..79f5dcaf6ba0 100644
@@ -290,16 +290,16 @@ struct counter_device_state {
 	const struct attribute_group **groups;
 };
 
-enum counter_signal_value {
-	COUNTER_SIGNAL_LOW = 0,
-	COUNTER_SIGNAL_HIGH
+enum counter_signal_level {
+	COUNTER_SIGNAL_LEVEL_LOW,
+	COUNTER_SIGNAL_LEVEL_HIGH,
 };
 
 /**
  * struct counter_ops - Callbacks from driver
  * @signal_read:	optional read callback for Signal attribute. The read
- *			value of the respective Signal should be passed back via
- *			the val parameter.
+ *			level of the respective Signal should be passed back via
+ *			the level parameter.
  * @count_read:		optional read callback for Count attribute. The read
  *			value of the respective Count should be passed back via
  *			the val parameter.
@@ -324,7 +324,7 @@ enum counter_signal_value {
 struct counter_ops {
 	int (*signal_read)(struct counter_device *counter,
 			   struct counter_signal *signal,
-			   enum counter_signal_value *val);
+			   enum counter_signal_level *level);
 	int (*count_read)(struct counter_device *counter,
 			  struct counter_count *count, unsigned long *val);
 	int (*count_write)(struct counter_device *counter,
Signature · 1 line
2.30.2
#36 lore raw

PATCH v10 21/33 counter: Rename counter_count_function to counter_function

In reply to William Breathitt Gray

The phrase "Counter Count function" is verbose and unintentionally implies that function is a Count extension. This patch adjusts the Counter subsystem code to use the more direct "Counter function" phrase to make the intent of this code clearer.

Cc Syed Nayyar Waris <[email protected]>
Cc Patrick Havelange <[email protected]>
Cc Oleksij Rempel <[email protected]>
Cc Kamel Bouhara <[email protected]>
Cc Fabrice Gasnier <[email protected]>
Cc Maxime Coquelin <[email protected]>
Cc Alexandre Torgue <[email protected]>
Cc David Lechner <[email protected]>
---
 drivers/counter/104-quad-8.c            | 10 +++----
 drivers/counter/counter.c               | 38 ++++++++++++-------------
 drivers/counter/ftm-quaddec.c           |  5 ++--
 drivers/counter/interrupt-cnt.c         |  4 +--
 drivers/counter/microchip-tcb-capture.c |  4 +--
 drivers/counter/stm32-lptimer-cnt.c     |  6 ++--
 drivers/counter/stm32-timer-cnt.c       | 10 +++----
 drivers/counter/ti-eqep.c               | 10 +++----
 include/linux/counter.h                 | 20 ++++++-------
 9 files changed, 53 insertions(+), 54 deletions(-)
drivers/counter/104-quad-8.c +5 -5
index fb0f021c0751..5a49ace2d4a6 100644
@@ -194,11 +194,11 @@ enum quad8_count_function {
 	QUAD8_COUNT_FUNCTION_QUADRATURE_X4
 };
 
-static const enum counter_count_function quad8_count_functions_list[] = {
-	[QUAD8_COUNT_FUNCTION_PULSE_DIRECTION] = COUNTER_COUNT_FUNCTION_PULSE_DIRECTION,
-	[QUAD8_COUNT_FUNCTION_QUADRATURE_X1] = COUNTER_COUNT_FUNCTION_QUADRATURE_X1_A,
-	[QUAD8_COUNT_FUNCTION_QUADRATURE_X2] = COUNTER_COUNT_FUNCTION_QUADRATURE_X2_A,
-	[QUAD8_COUNT_FUNCTION_QUADRATURE_X4] = COUNTER_COUNT_FUNCTION_QUADRATURE_X4
+static const enum counter_function quad8_count_functions_list[] = {
+	[QUAD8_COUNT_FUNCTION_PULSE_DIRECTION] = COUNTER_FUNCTION_PULSE_DIRECTION,
+	[QUAD8_COUNT_FUNCTION_QUADRATURE_X1] = COUNTER_FUNCTION_QUADRATURE_X1_A,
+	[QUAD8_COUNT_FUNCTION_QUADRATURE_X2] = COUNTER_FUNCTION_QUADRATURE_X2_A,
+	[QUAD8_COUNT_FUNCTION_QUADRATURE_X4] = COUNTER_FUNCTION_QUADRATURE_X4
 };
 
 static int quad8_function_get(struct counter_device *counter,
drivers/counter/counter.c +19 -19
index cb92673552b5..de921e8a3f72 100644
@@ -744,15 +744,15 @@ static ssize_t counter_count_store(struct device *dev,
 	return len;
 }
 
-static const char *const counter_count_function_str[] = {
-	[COUNTER_COUNT_FUNCTION_INCREASE] = "increase",
-	[COUNTER_COUNT_FUNCTION_DECREASE] = "decrease",
-	[COUNTER_COUNT_FUNCTION_PULSE_DIRECTION] = "pulse-direction",
-	[COUNTER_COUNT_FUNCTION_QUADRATURE_X1_A] = "quadrature x1 a",
-	[COUNTER_COUNT_FUNCTION_QUADRATURE_X1_B] = "quadrature x1 b",
-	[COUNTER_COUNT_FUNCTION_QUADRATURE_X2_A] = "quadrature x2 a",
-	[COUNTER_COUNT_FUNCTION_QUADRATURE_X2_B] = "quadrature x2 b",
-	[COUNTER_COUNT_FUNCTION_QUADRATURE_X4] = "quadrature x4"
+static const char *const counter_function_str[] = {
+	[COUNTER_FUNCTION_INCREASE] = "increase",
+	[COUNTER_FUNCTION_DECREASE] = "decrease",
+	[COUNTER_FUNCTION_PULSE_DIRECTION] = "pulse-direction",
+	[COUNTER_FUNCTION_QUADRATURE_X1_A] = "quadrature x1 a",
+	[COUNTER_FUNCTION_QUADRATURE_X1_B] = "quadrature x1 b",
+	[COUNTER_FUNCTION_QUADRATURE_X2_A] = "quadrature x2 a",
+	[COUNTER_FUNCTION_QUADRATURE_X2_B] = "quadrature x2 b",
+	[COUNTER_FUNCTION_QUADRATURE_X4] = "quadrature x4"
 };
 
 static ssize_t counter_function_show(struct device *dev,
@@ -764,7 +764,7 @@ static ssize_t counter_function_show(struct device *dev,
 	const struct counter_count_unit *const component = devattr->component;
 	struct counter_count *const count = component->count;
 	size_t func_index;
-	enum counter_count_function function;
+	enum counter_function function;
 
 	err = counter->ops->function_get(counter, count, &func_index);
 	if (err)
@@ -773,7 +773,7 @@ static ssize_t counter_function_show(struct device *dev,
 	count->function = func_index;
 
 	function = count->functions_list[func_index];
-	return sprintf(buf, "%s\n", counter_count_function_str[function]);
+	return sprintf(buf, "%s\n", counter_function_str[function]);
 }
 
 static ssize_t counter_function_store(struct device *dev,
@@ -785,14 +785,14 @@ static ssize_t counter_function_store(struct device *dev,
 	struct counter_count *const count = component->count;
 	const size_t num_functions = count->num_functions;
 	size_t func_index;
-	enum counter_count_function function;
+	enum counter_function function;
 	int err;
 	struct counter_device *const counter = dev_get_drvdata(dev);
 
 	/* Find requested Count function mode */
 	for (func_index = 0; func_index < num_functions; func_index++) {
 		function = count->functions_list[func_index];
-		if (sysfs_streq(buf, counter_count_function_str[function]))
+		if (sysfs_streq(buf, counter_function_str[function]))
 			break;
 	}
 	/* Return error if requested Count function mode not found */
@@ -880,25 +880,25 @@ static int counter_count_ext_register(
 }
 
 struct counter_func_avail_unit {
-	const enum counter_count_function *functions_list;
+	const enum counter_function *functions_list;
 	size_t num_functions;
 };
 
-static ssize_t counter_count_function_available_show(struct device *dev,
+static ssize_t counter_function_available_show(struct device *dev,
 	struct device_attribute *attr, char *buf)
 {
 	const struct counter_device_attr *const devattr = to_counter_attr(attr);
 	const struct counter_func_avail_unit *const component = devattr->component;
-	const enum counter_count_function *const func_list = component->functions_list;
+	const enum counter_function *const func_list = component->functions_list;
 	const size_t num_functions = component->num_functions;
 	size_t i;
-	enum counter_count_function function;
+	enum counter_function function;
 	ssize_t len = 0;
 
 	for (i = 0; i < num_functions; i++) {
 		function = func_list[i];
 		len += sprintf(buf + len, "%s\n",
-			       counter_count_function_str[function]);
+			       counter_function_str[function]);
 	}
 
 	return len;
@@ -968,7 +968,7 @@ static int counter_count_attributes_create(
 	parm.group = group;
 	parm.prefix = "";
 	parm.name = "function_available";
-	parm.show = counter_count_function_available_show;
+	parm.show = counter_function_available_show;
 	parm.store = NULL;
 	parm.component = avail_comp;
 	err = counter_attribute_create(&parm);
drivers/counter/ftm-quaddec.c +2 -3
index 9371532406ca..53c15f84909b 100644
@@ -171,9 +171,8 @@ enum ftm_quaddec_count_function {
 	FTM_QUADDEC_COUNT_ENCODER_MODE_1,
 };
 
-static const enum counter_count_function ftm_quaddec_count_functions[] = {
-	[FTM_QUADDEC_COUNT_ENCODER_MODE_1] =
-	COUNTER_COUNT_FUNCTION_QUADRATURE_X4
+static const enum counter_function ftm_quaddec_count_functions[] = {
+	[FTM_QUADDEC_COUNT_ENCODER_MODE_1] = COUNTER_FUNCTION_QUADRATURE_X4
 };
 
 static int ftm_quaddec_count_read(struct counter_device *counter,
drivers/counter/interrupt-cnt.c +2 -2
index cce579c1c6ae..3dbb8acc67eb 100644
@@ -115,8 +115,8 @@ static int interrupt_cnt_write(struct counter_device *counter,
 	return 0;
 }
 
-static const enum counter_count_function interrupt_cnt_functions[] = {
-	COUNTER_COUNT_FUNCTION_INCREASE,
+static const enum counter_function interrupt_cnt_functions[] = {
+	COUNTER_FUNCTION_INCREASE,
 };
 
 static int interrupt_cnt_function_get(struct counter_device *counter,
drivers/counter/microchip-tcb-capture.c +2 -2
index 6be3adf74114..4c57d43e7d66 100644
@@ -38,8 +38,8 @@ enum mchp_tc_count_function {
 };
 
 static const enum counter_count_function mchp_tc_count_functions[] = {
-	[MCHP_TC_FUNCTION_INCREASE] = COUNTER_COUNT_FUNCTION_INCREASE,
-	[MCHP_TC_FUNCTION_QUADRATURE] = COUNTER_COUNT_FUNCTION_QUADRATURE_X4,
+	[MCHP_TC_FUNCTION_INCREASE] = COUNTER_FUNCTION_INCREASE,
+	[MCHP_TC_FUNCTION_QUADRATURE] = COUNTER_FUNCTION_QUADRATURE_X4,
 };
 
 enum mchp_tc_synapse_action {
drivers/counter/stm32-lptimer-cnt.c +3 -3
index 49aeb9e393f3..13656957c45f 100644
@@ -134,9 +134,9 @@ enum stm32_lptim_cnt_function {
 	STM32_LPTIM_ENCODER_BOTH_EDGE,
 };
 
-static const enum counter_count_function stm32_lptim_cnt_functions[] = {
-	[STM32_LPTIM_COUNTER_INCREASE] = COUNTER_COUNT_FUNCTION_INCREASE,
-	[STM32_LPTIM_ENCODER_BOTH_EDGE] = COUNTER_COUNT_FUNCTION_QUADRATURE_X4,
+static const enum counter_function stm32_lptim_cnt_functions[] = {
+	[STM32_LPTIM_COUNTER_INCREASE] = COUNTER_FUNCTION_INCREASE,
+	[STM32_LPTIM_ENCODER_BOTH_EDGE] = COUNTER_FUNCTION_QUADRATURE_X4,
 };
 
 enum stm32_lptim_synapse_action {
drivers/counter/stm32-timer-cnt.c +5 -5
index 603b30ada839..3fb0debd7425 100644
@@ -50,11 +50,11 @@ enum stm32_count_function {
 	STM32_COUNT_ENCODER_MODE_3,
 };
 
-static const enum counter_count_function stm32_count_functions[] = {
-	[STM32_COUNT_SLAVE_MODE_DISABLED] = COUNTER_COUNT_FUNCTION_INCREASE,
-	[STM32_COUNT_ENCODER_MODE_1] = COUNTER_COUNT_FUNCTION_QUADRATURE_X2_A,
-	[STM32_COUNT_ENCODER_MODE_2] = COUNTER_COUNT_FUNCTION_QUADRATURE_X2_B,
-	[STM32_COUNT_ENCODER_MODE_3] = COUNTER_COUNT_FUNCTION_QUADRATURE_X4,
+static const enum counter_function stm32_count_functions[] = {
+	[STM32_COUNT_SLAVE_MODE_DISABLED] = COUNTER_FUNCTION_INCREASE,
+	[STM32_COUNT_ENCODER_MODE_1] = COUNTER_FUNCTION_QUADRATURE_X2_A,
+	[STM32_COUNT_ENCODER_MODE_2] = COUNTER_FUNCTION_QUADRATURE_X2_B,
+	[STM32_COUNT_ENCODER_MODE_3] = COUNTER_FUNCTION_QUADRATURE_X4,
 };
 
 static int stm32_count_read(struct counter_device *counter,
drivers/counter/ti-eqep.c +5 -5
index 878725c2f010..04be25ebf4a4 100644
@@ -284,11 +284,11 @@ static struct counter_signal ti_eqep_signals[] = {
 	},
 };
 
-static const enum counter_count_function ti_eqep_position_functions[] = {
-	[TI_EQEP_COUNT_FUNC_QUAD_COUNT]	= COUNTER_COUNT_FUNCTION_QUADRATURE_X4,
-	[TI_EQEP_COUNT_FUNC_DIR_COUNT]	= COUNTER_COUNT_FUNCTION_PULSE_DIRECTION,
-	[TI_EQEP_COUNT_FUNC_UP_COUNT]	= COUNTER_COUNT_FUNCTION_INCREASE,
-	[TI_EQEP_COUNT_FUNC_DOWN_COUNT]	= COUNTER_COUNT_FUNCTION_DECREASE,
+static const enum counter_function ti_eqep_position_functions[] = {
+	[TI_EQEP_COUNT_FUNC_QUAD_COUNT]	= COUNTER_FUNCTION_QUADRATURE_X4,
+	[TI_EQEP_COUNT_FUNC_DIR_COUNT]	= COUNTER_FUNCTION_PULSE_DIRECTION,
+	[TI_EQEP_COUNT_FUNC_UP_COUNT]	= COUNTER_FUNCTION_INCREASE,
+	[TI_EQEP_COUNT_FUNC_DOWN_COUNT]	= COUNTER_FUNCTION_DECREASE,
 };
 
 static const enum counter_synapse_action ti_eqep_position_synapse_actions[] = {
include/linux/counter.h +10 -10
index 79f5dcaf6ba0..d16ce2819b48 100644
@@ -162,15 +162,15 @@ struct counter_count_ext {
 	void *priv;
 };
 
-enum counter_count_function {
-	COUNTER_COUNT_FUNCTION_INCREASE = 0,
-	COUNTER_COUNT_FUNCTION_DECREASE,
-	COUNTER_COUNT_FUNCTION_PULSE_DIRECTION,
-	COUNTER_COUNT_FUNCTION_QUADRATURE_X1_A,
-	COUNTER_COUNT_FUNCTION_QUADRATURE_X1_B,
-	COUNTER_COUNT_FUNCTION_QUADRATURE_X2_A,
-	COUNTER_COUNT_FUNCTION_QUADRATURE_X2_B,
-	COUNTER_COUNT_FUNCTION_QUADRATURE_X4
+enum counter_function {
+	COUNTER_FUNCTION_INCREASE = 0,
+	COUNTER_FUNCTION_DECREASE,
+	COUNTER_FUNCTION_PULSE_DIRECTION,
+	COUNTER_FUNCTION_QUADRATURE_X1_A,
+	COUNTER_FUNCTION_QUADRATURE_X1_B,
+	COUNTER_FUNCTION_QUADRATURE_X2_A,
+	COUNTER_FUNCTION_QUADRATURE_X2_B,
+	COUNTER_FUNCTION_QUADRATURE_X4
 };
 
 /**
@@ -192,7 +192,7 @@ struct counter_count {
 	const char *name;
 
 	size_t function;
-	const enum counter_count_function *functions_list;
+	const enum counter_function *functions_list;
 	size_t num_functions;
 
 	struct counter_synapse *synapses;
Signature · 1 line
2.30.2
maintainer Reviewed-by on v10 21/33
#37 lore raw

Re: [Linux-stm32] [PATCH v10 21/33] counter: Rename counter_count_function to counter_function

Quoted 14 lines · William Breathitt Gray

The phrase "Counter Count function" is verbose and unintentionally implies that function is a Count extension. This patch adjusts the Counter subsystem code to use the more direct "Counter function" phrase to make the intent of this code clearer.

Cc Syed Nayyar Waris <[email protected]>
Cc Patrick Havelange <[email protected]>
Cc Oleksij Rempel <[email protected]>
Cc Kamel Bouhara <[email protected]>
Cc Fabrice Gasnier <[email protected]>
Cc Maxime Coquelin <[email protected]>
Cc Alexandre Torgue <[email protected]>
Cc David Lechner <[email protected]>
Quoted 8 lines
---
 drivers/counter/104-quad-8.c            | 10 +++----
 drivers/counter/counter.c               | 38 ++++++++++++-------------
 drivers/counter/ftm-quaddec.c           |  5 ++--
 drivers/counter/interrupt-cnt.c         |  4 +--
 drivers/counter/microchip-tcb-capture.c |  4 +--
 drivers/counter/stm32-lptimer-cnt.c     |  6 ++--
 drivers/counter/stm32-timer-cnt.c       | 10 +++----

Hi William,

For the STM32 drivers, you can add my:

Thanks,
Fabrice

Quoted 273 lines
 drivers/counter/ti-eqep.c               | 10 +++----
 include/linux/counter.h                 | 20 ++++++-------
 9 files changed, 53 insertions(+), 54 deletions(-)
drivers/counter/104-quad-8.c +5 -5
index fb0f021c0751..5a49ace2d4a6 100644
@@ -194,11 +194,11 @@ enum quad8_count_function {
 	QUAD8_COUNT_FUNCTION_QUADRATURE_X4
 };
 
-static const enum counter_count_function quad8_count_functions_list[] = {
-	[QUAD8_COUNT_FUNCTION_PULSE_DIRECTION] = COUNTER_COUNT_FUNCTION_PULSE_DIRECTION,
-	[QUAD8_COUNT_FUNCTION_QUADRATURE_X1] = COUNTER_COUNT_FUNCTION_QUADRATURE_X1_A,
-	[QUAD8_COUNT_FUNCTION_QUADRATURE_X2] = COUNTER_COUNT_FUNCTION_QUADRATURE_X2_A,
-	[QUAD8_COUNT_FUNCTION_QUADRATURE_X4] = COUNTER_COUNT_FUNCTION_QUADRATURE_X4
+static const enum counter_function quad8_count_functions_list[] = {
+	[QUAD8_COUNT_FUNCTION_PULSE_DIRECTION] = COUNTER_FUNCTION_PULSE_DIRECTION,
+	[QUAD8_COUNT_FUNCTION_QUADRATURE_X1] = COUNTER_FUNCTION_QUADRATURE_X1_A,
+	[QUAD8_COUNT_FUNCTION_QUADRATURE_X2] = COUNTER_FUNCTION_QUADRATURE_X2_A,
+	[QUAD8_COUNT_FUNCTION_QUADRATURE_X4] = COUNTER_FUNCTION_QUADRATURE_X4
 };
 
 static int quad8_function_get(struct counter_device *counter,
drivers/counter/counter.c +19 -19
index cb92673552b5..de921e8a3f72 100644
@@ -744,15 +744,15 @@ static ssize_t counter_count_store(struct device *dev,
 	return len;
 }
 
-static const char *const counter_count_function_str[] = {
-	[COUNTER_COUNT_FUNCTION_INCREASE] = "increase",
-	[COUNTER_COUNT_FUNCTION_DECREASE] = "decrease",
-	[COUNTER_COUNT_FUNCTION_PULSE_DIRECTION] = "pulse-direction",
-	[COUNTER_COUNT_FUNCTION_QUADRATURE_X1_A] = "quadrature x1 a",
-	[COUNTER_COUNT_FUNCTION_QUADRATURE_X1_B] = "quadrature x1 b",
-	[COUNTER_COUNT_FUNCTION_QUADRATURE_X2_A] = "quadrature x2 a",
-	[COUNTER_COUNT_FUNCTION_QUADRATURE_X2_B] = "quadrature x2 b",
-	[COUNTER_COUNT_FUNCTION_QUADRATURE_X4] = "quadrature x4"
+static const char *const counter_function_str[] = {
+	[COUNTER_FUNCTION_INCREASE] = "increase",
+	[COUNTER_FUNCTION_DECREASE] = "decrease",
+	[COUNTER_FUNCTION_PULSE_DIRECTION] = "pulse-direction",
+	[COUNTER_FUNCTION_QUADRATURE_X1_A] = "quadrature x1 a",
+	[COUNTER_FUNCTION_QUADRATURE_X1_B] = "quadrature x1 b",
+	[COUNTER_FUNCTION_QUADRATURE_X2_A] = "quadrature x2 a",
+	[COUNTER_FUNCTION_QUADRATURE_X2_B] = "quadrature x2 b",
+	[COUNTER_FUNCTION_QUADRATURE_X4] = "quadrature x4"
 };
 
 static ssize_t counter_function_show(struct device *dev,
@@ -764,7 +764,7 @@ static ssize_t counter_function_show(struct device *dev,
 	const struct counter_count_unit *const component = devattr->component;
 	struct counter_count *const count = component->count;
 	size_t func_index;
-	enum counter_count_function function;
+	enum counter_function function;
 
 	err = counter->ops->function_get(counter, count, &func_index);
 	if (err)
@@ -773,7 +773,7 @@ static ssize_t counter_function_show(struct device *dev,
 	count->function = func_index;
 
 	function = count->functions_list[func_index];
-	return sprintf(buf, "%s\n", counter_count_function_str[function]);
+	return sprintf(buf, "%s\n", counter_function_str[function]);
 }
 
 static ssize_t counter_function_store(struct device *dev,
@@ -785,14 +785,14 @@ static ssize_t counter_function_store(struct device *dev,
 	struct counter_count *const count = component->count;
 	const size_t num_functions = count->num_functions;
 	size_t func_index;
-	enum counter_count_function function;
+	enum counter_function function;
 	int err;
 	struct counter_device *const counter = dev_get_drvdata(dev);
 
 	/* Find requested Count function mode */
 	for (func_index = 0; func_index < num_functions; func_index++) {
 		function = count->functions_list[func_index];
-		if (sysfs_streq(buf, counter_count_function_str[function]))
+		if (sysfs_streq(buf, counter_function_str[function]))
 			break;
 	}
 	/* Return error if requested Count function mode not found */
@@ -880,25 +880,25 @@ static int counter_count_ext_register(
 }
 
 struct counter_func_avail_unit {
-	const enum counter_count_function *functions_list;
+	const enum counter_function *functions_list;
 	size_t num_functions;
 };
 
-static ssize_t counter_count_function_available_show(struct device *dev,
+static ssize_t counter_function_available_show(struct device *dev,
 	struct device_attribute *attr, char *buf)
 {
 	const struct counter_device_attr *const devattr = to_counter_attr(attr);
 	const struct counter_func_avail_unit *const component = devattr->component;
-	const enum counter_count_function *const func_list = component->functions_list;
+	const enum counter_function *const func_list = component->functions_list;
 	const size_t num_functions = component->num_functions;
 	size_t i;
-	enum counter_count_function function;
+	enum counter_function function;
 	ssize_t len = 0;
 
 	for (i = 0; i < num_functions; i++) {
 		function = func_list[i];
 		len += sprintf(buf + len, "%s\n",
-			       counter_count_function_str[function]);
+			       counter_function_str[function]);
 	}
 
 	return len;
@@ -968,7 +968,7 @@ static int counter_count_attributes_create(
 	parm.group = group;
 	parm.prefix = "";
 	parm.name = "function_available";
-	parm.show = counter_count_function_available_show;
+	parm.show = counter_function_available_show;
 	parm.store = NULL;
 	parm.component = avail_comp;
 	err = counter_attribute_create(&parm);
drivers/counter/ftm-quaddec.c +2 -3
index 9371532406ca..53c15f84909b 100644
@@ -171,9 +171,8 @@ enum ftm_quaddec_count_function {
 	FTM_QUADDEC_COUNT_ENCODER_MODE_1,
 };
 
-static const enum counter_count_function ftm_quaddec_count_functions[] = {
-	[FTM_QUADDEC_COUNT_ENCODER_MODE_1] =
-	COUNTER_COUNT_FUNCTION_QUADRATURE_X4
+static const enum counter_function ftm_quaddec_count_functions[] = {
+	[FTM_QUADDEC_COUNT_ENCODER_MODE_1] = COUNTER_FUNCTION_QUADRATURE_X4
 };
 
 static int ftm_quaddec_count_read(struct counter_device *counter,
drivers/counter/interrupt-cnt.c +2 -2
index cce579c1c6ae..3dbb8acc67eb 100644
@@ -115,8 +115,8 @@ static int interrupt_cnt_write(struct counter_device *counter,
 	return 0;
 }
 
-static const enum counter_count_function interrupt_cnt_functions[] = {
-	COUNTER_COUNT_FUNCTION_INCREASE,
+static const enum counter_function interrupt_cnt_functions[] = {
+	COUNTER_FUNCTION_INCREASE,
 };
 
 static int interrupt_cnt_function_get(struct counter_device *counter,
drivers/counter/microchip-tcb-capture.c +2 -2
index 6be3adf74114..4c57d43e7d66 100644
@@ -38,8 +38,8 @@ enum mchp_tc_count_function {
 };
 
 static const enum counter_count_function mchp_tc_count_functions[] = {
-	[MCHP_TC_FUNCTION_INCREASE] = COUNTER_COUNT_FUNCTION_INCREASE,
-	[MCHP_TC_FUNCTION_QUADRATURE] = COUNTER_COUNT_FUNCTION_QUADRATURE_X4,
+	[MCHP_TC_FUNCTION_INCREASE] = COUNTER_FUNCTION_INCREASE,
+	[MCHP_TC_FUNCTION_QUADRATURE] = COUNTER_FUNCTION_QUADRATURE_X4,
 };
 
 enum mchp_tc_synapse_action {
drivers/counter/stm32-lptimer-cnt.c +3 -3
index 49aeb9e393f3..13656957c45f 100644
@@ -134,9 +134,9 @@ enum stm32_lptim_cnt_function {
 	STM32_LPTIM_ENCODER_BOTH_EDGE,
 };
 
-static const enum counter_count_function stm32_lptim_cnt_functions[] = {
-	[STM32_LPTIM_COUNTER_INCREASE] = COUNTER_COUNT_FUNCTION_INCREASE,
-	[STM32_LPTIM_ENCODER_BOTH_EDGE] = COUNTER_COUNT_FUNCTION_QUADRATURE_X4,
+static const enum counter_function stm32_lptim_cnt_functions[] = {
+	[STM32_LPTIM_COUNTER_INCREASE] = COUNTER_FUNCTION_INCREASE,
+	[STM32_LPTIM_ENCODER_BOTH_EDGE] = COUNTER_FUNCTION_QUADRATURE_X4,
 };
 
 enum stm32_lptim_synapse_action {
drivers/counter/stm32-timer-cnt.c +5 -5
index 603b30ada839..3fb0debd7425 100644
@@ -50,11 +50,11 @@ enum stm32_count_function {
 	STM32_COUNT_ENCODER_MODE_3,
 };
 
-static const enum counter_count_function stm32_count_functions[] = {
-	[STM32_COUNT_SLAVE_MODE_DISABLED] = COUNTER_COUNT_FUNCTION_INCREASE,
-	[STM32_COUNT_ENCODER_MODE_1] = COUNTER_COUNT_FUNCTION_QUADRATURE_X2_A,
-	[STM32_COUNT_ENCODER_MODE_2] = COUNTER_COUNT_FUNCTION_QUADRATURE_X2_B,
-	[STM32_COUNT_ENCODER_MODE_3] = COUNTER_COUNT_FUNCTION_QUADRATURE_X4,
+static const enum counter_function stm32_count_functions[] = {
+	[STM32_COUNT_SLAVE_MODE_DISABLED] = COUNTER_FUNCTION_INCREASE,
+	[STM32_COUNT_ENCODER_MODE_1] = COUNTER_FUNCTION_QUADRATURE_X2_A,
+	[STM32_COUNT_ENCODER_MODE_2] = COUNTER_FUNCTION_QUADRATURE_X2_B,
+	[STM32_COUNT_ENCODER_MODE_3] = COUNTER_FUNCTION_QUADRATURE_X4,
 };
 
 static int stm32_count_read(struct counter_device *counter,
drivers/counter/ti-eqep.c +5 -5
index 878725c2f010..04be25ebf4a4 100644
@@ -284,11 +284,11 @@ static struct counter_signal ti_eqep_signals[] = {
 	},
 };
 
-static const enum counter_count_function ti_eqep_position_functions[] = {
-	[TI_EQEP_COUNT_FUNC_QUAD_COUNT]	= COUNTER_COUNT_FUNCTION_QUADRATURE_X4,
-	[TI_EQEP_COUNT_FUNC_DIR_COUNT]	= COUNTER_COUNT_FUNCTION_PULSE_DIRECTION,
-	[TI_EQEP_COUNT_FUNC_UP_COUNT]	= COUNTER_COUNT_FUNCTION_INCREASE,
-	[TI_EQEP_COUNT_FUNC_DOWN_COUNT]	= COUNTER_COUNT_FUNCTION_DECREASE,
+static const enum counter_function ti_eqep_position_functions[] = {
+	[TI_EQEP_COUNT_FUNC_QUAD_COUNT]	= COUNTER_FUNCTION_QUADRATURE_X4,
+	[TI_EQEP_COUNT_FUNC_DIR_COUNT]	= COUNTER_FUNCTION_PULSE_DIRECTION,
+	[TI_EQEP_COUNT_FUNC_UP_COUNT]	= COUNTER_FUNCTION_INCREASE,
+	[TI_EQEP_COUNT_FUNC_DOWN_COUNT]	= COUNTER_FUNCTION_DECREASE,
 };
 
 static const enum counter_synapse_action ti_eqep_position_synapse_actions[] = {
include/linux/counter.h +10 -10
index 79f5dcaf6ba0..d16ce2819b48 100644
@@ -162,15 +162,15 @@ struct counter_count_ext {
 	void *priv;
 };
 
-enum counter_count_function {
-	COUNTER_COUNT_FUNCTION_INCREASE = 0,
-	COUNTER_COUNT_FUNCTION_DECREASE,
-	COUNTER_COUNT_FUNCTION_PULSE_DIRECTION,
-	COUNTER_COUNT_FUNCTION_QUADRATURE_X1_A,
-	COUNTER_COUNT_FUNCTION_QUADRATURE_X1_B,
-	COUNTER_COUNT_FUNCTION_QUADRATURE_X2_A,
-	COUNTER_COUNT_FUNCTION_QUADRATURE_X2_B,
-	COUNTER_COUNT_FUNCTION_QUADRATURE_X4
+enum counter_function {
+	COUNTER_FUNCTION_INCREASE = 0,
+	COUNTER_FUNCTION_DECREASE,
+	COUNTER_FUNCTION_PULSE_DIRECTION,
+	COUNTER_FUNCTION_QUADRATURE_X1_A,
+	COUNTER_FUNCTION_QUADRATURE_X1_B,
+	COUNTER_FUNCTION_QUADRATURE_X2_A,
+	COUNTER_FUNCTION_QUADRATURE_X2_B,
+	COUNTER_FUNCTION_QUADRATURE_X4
 };
 
 /**
@@ -192,7 +192,7 @@ struct counter_count {
 	const char *name;
 
 	size_t function;
-	const enum counter_count_function *functions_list;
+	const enum counter_function *functions_list;
 	size_t num_functions;
 
 	struct counter_synapse *synapses;
Acked-by on v10 21/33
#38 lore raw

Re: [PATCH v10 21/33] counter: Rename counter_count_function to counter_function

In reply to William Breathitt Gray
Quoted 14 lines · William Breathitt Gray

The phrase "Counter Count function" is verbose and unintentionally implies that function is a Count extension. This patch adjusts the Counter subsystem code to use the more direct "Counter function" phrase to make the intent of this code clearer.

Cc Syed Nayyar Waris <[email protected]>
Cc Patrick Havelange <[email protected]>
Cc Oleksij Rempel <[email protected]>
Cc Kamel Bouhara <[email protected]>
Cc Fabrice Gasnier <[email protected]>
Cc Maxime Coquelin <[email protected]>
Cc Alexandre Torgue <[email protected]>
Cc David Lechner <[email protected]>
Quoted 2 lines
---
 drivers/counter/104-quad-8.c            | 10 +++----

For the 104-quad-8 driver:

Quoted 281 lines
 drivers/counter/counter.c               | 38 ++++++++++++-------------
 drivers/counter/ftm-quaddec.c           |  5 ++--
 drivers/counter/interrupt-cnt.c         |  4 +--
 drivers/counter/microchip-tcb-capture.c |  4 +--
 drivers/counter/stm32-lptimer-cnt.c     |  6 ++--
 drivers/counter/stm32-timer-cnt.c       | 10 +++----
 drivers/counter/ti-eqep.c               | 10 +++----
 include/linux/counter.h                 | 20 ++++++-------
 9 files changed, 53 insertions(+), 54 deletions(-)
drivers/counter/104-quad-8.c +5 -5
index fb0f021c0751..5a49ace2d4a6 100644
@@ -194,11 +194,11 @@ enum quad8_count_function {
 	QUAD8_COUNT_FUNCTION_QUADRATURE_X4
 };
 
-static const enum counter_count_function quad8_count_functions_list[] = {
-	[QUAD8_COUNT_FUNCTION_PULSE_DIRECTION] = COUNTER_COUNT_FUNCTION_PULSE_DIRECTION,
-	[QUAD8_COUNT_FUNCTION_QUADRATURE_X1] = COUNTER_COUNT_FUNCTION_QUADRATURE_X1_A,
-	[QUAD8_COUNT_FUNCTION_QUADRATURE_X2] = COUNTER_COUNT_FUNCTION_QUADRATURE_X2_A,
-	[QUAD8_COUNT_FUNCTION_QUADRATURE_X4] = COUNTER_COUNT_FUNCTION_QUADRATURE_X4
+static const enum counter_function quad8_count_functions_list[] = {
+	[QUAD8_COUNT_FUNCTION_PULSE_DIRECTION] = COUNTER_FUNCTION_PULSE_DIRECTION,
+	[QUAD8_COUNT_FUNCTION_QUADRATURE_X1] = COUNTER_FUNCTION_QUADRATURE_X1_A,
+	[QUAD8_COUNT_FUNCTION_QUADRATURE_X2] = COUNTER_FUNCTION_QUADRATURE_X2_A,
+	[QUAD8_COUNT_FUNCTION_QUADRATURE_X4] = COUNTER_FUNCTION_QUADRATURE_X4
 };
 
 static int quad8_function_get(struct counter_device *counter,
drivers/counter/counter.c +19 -19
index cb92673552b5..de921e8a3f72 100644
@@ -744,15 +744,15 @@ static ssize_t counter_count_store(struct device *dev,
 	return len;
 }
 
-static const char *const counter_count_function_str[] = {
-	[COUNTER_COUNT_FUNCTION_INCREASE] = "increase",
-	[COUNTER_COUNT_FUNCTION_DECREASE] = "decrease",
-	[COUNTER_COUNT_FUNCTION_PULSE_DIRECTION] = "pulse-direction",
-	[COUNTER_COUNT_FUNCTION_QUADRATURE_X1_A] = "quadrature x1 a",
-	[COUNTER_COUNT_FUNCTION_QUADRATURE_X1_B] = "quadrature x1 b",
-	[COUNTER_COUNT_FUNCTION_QUADRATURE_X2_A] = "quadrature x2 a",
-	[COUNTER_COUNT_FUNCTION_QUADRATURE_X2_B] = "quadrature x2 b",
-	[COUNTER_COUNT_FUNCTION_QUADRATURE_X4] = "quadrature x4"
+static const char *const counter_function_str[] = {
+	[COUNTER_FUNCTION_INCREASE] = "increase",
+	[COUNTER_FUNCTION_DECREASE] = "decrease",
+	[COUNTER_FUNCTION_PULSE_DIRECTION] = "pulse-direction",
+	[COUNTER_FUNCTION_QUADRATURE_X1_A] = "quadrature x1 a",
+	[COUNTER_FUNCTION_QUADRATURE_X1_B] = "quadrature x1 b",
+	[COUNTER_FUNCTION_QUADRATURE_X2_A] = "quadrature x2 a",
+	[COUNTER_FUNCTION_QUADRATURE_X2_B] = "quadrature x2 b",
+	[COUNTER_FUNCTION_QUADRATURE_X4] = "quadrature x4"
 };
 
 static ssize_t counter_function_show(struct device *dev,
@@ -764,7 +764,7 @@ static ssize_t counter_function_show(struct device *dev,
 	const struct counter_count_unit *const component = devattr->component;
 	struct counter_count *const count = component->count;
 	size_t func_index;
-	enum counter_count_function function;
+	enum counter_function function;
 
 	err = counter->ops->function_get(counter, count, &func_index);
 	if (err)
@@ -773,7 +773,7 @@ static ssize_t counter_function_show(struct device *dev,
 	count->function = func_index;
 
 	function = count->functions_list[func_index];
-	return sprintf(buf, "%s\n", counter_count_function_str[function]);
+	return sprintf(buf, "%s\n", counter_function_str[function]);
 }
 
 static ssize_t counter_function_store(struct device *dev,
@@ -785,14 +785,14 @@ static ssize_t counter_function_store(struct device *dev,
 	struct counter_count *const count = component->count;
 	const size_t num_functions = count->num_functions;
 	size_t func_index;
-	enum counter_count_function function;
+	enum counter_function function;
 	int err;
 	struct counter_device *const counter = dev_get_drvdata(dev);
 
 	/* Find requested Count function mode */
 	for (func_index = 0; func_index < num_functions; func_index++) {
 		function = count->functions_list[func_index];
-		if (sysfs_streq(buf, counter_count_function_str[function]))
+		if (sysfs_streq(buf, counter_function_str[function]))
 			break;
 	}
 	/* Return error if requested Count function mode not found */
@@ -880,25 +880,25 @@ static int counter_count_ext_register(
 }
 
 struct counter_func_avail_unit {
-	const enum counter_count_function *functions_list;
+	const enum counter_function *functions_list;
 	size_t num_functions;
 };
 
-static ssize_t counter_count_function_available_show(struct device *dev,
+static ssize_t counter_function_available_show(struct device *dev,
 	struct device_attribute *attr, char *buf)
 {
 	const struct counter_device_attr *const devattr = to_counter_attr(attr);
 	const struct counter_func_avail_unit *const component = devattr->component;
-	const enum counter_count_function *const func_list = component->functions_list;
+	const enum counter_function *const func_list = component->functions_list;
 	const size_t num_functions = component->num_functions;
 	size_t i;
-	enum counter_count_function function;
+	enum counter_function function;
 	ssize_t len = 0;
 
 	for (i = 0; i < num_functions; i++) {
 		function = func_list[i];
 		len += sprintf(buf + len, "%s\n",
-			       counter_count_function_str[function]);
+			       counter_function_str[function]);
 	}
 
 	return len;
@@ -968,7 +968,7 @@ static int counter_count_attributes_create(
 	parm.group = group;
 	parm.prefix = "";
 	parm.name = "function_available";
-	parm.show = counter_count_function_available_show;
+	parm.show = counter_function_available_show;
 	parm.store = NULL;
 	parm.component = avail_comp;
 	err = counter_attribute_create(&parm);
drivers/counter/ftm-quaddec.c +2 -3
index 9371532406ca..53c15f84909b 100644
@@ -171,9 +171,8 @@ enum ftm_quaddec_count_function {
 	FTM_QUADDEC_COUNT_ENCODER_MODE_1,
 };
 
-static const enum counter_count_function ftm_quaddec_count_functions[] = {
-	[FTM_QUADDEC_COUNT_ENCODER_MODE_1] =
-	COUNTER_COUNT_FUNCTION_QUADRATURE_X4
+static const enum counter_function ftm_quaddec_count_functions[] = {
+	[FTM_QUADDEC_COUNT_ENCODER_MODE_1] = COUNTER_FUNCTION_QUADRATURE_X4
 };
 
 static int ftm_quaddec_count_read(struct counter_device *counter,
drivers/counter/interrupt-cnt.c +2 -2
index cce579c1c6ae..3dbb8acc67eb 100644
@@ -115,8 +115,8 @@ static int interrupt_cnt_write(struct counter_device *counter,
 	return 0;
 }
 
-static const enum counter_count_function interrupt_cnt_functions[] = {
-	COUNTER_COUNT_FUNCTION_INCREASE,
+static const enum counter_function interrupt_cnt_functions[] = {
+	COUNTER_FUNCTION_INCREASE,
 };
 
 static int interrupt_cnt_function_get(struct counter_device *counter,
drivers/counter/microchip-tcb-capture.c +2 -2
index 6be3adf74114..4c57d43e7d66 100644
@@ -38,8 +38,8 @@ enum mchp_tc_count_function {
 };
 
 static const enum counter_count_function mchp_tc_count_functions[] = {
-	[MCHP_TC_FUNCTION_INCREASE] = COUNTER_COUNT_FUNCTION_INCREASE,
-	[MCHP_TC_FUNCTION_QUADRATURE] = COUNTER_COUNT_FUNCTION_QUADRATURE_X4,
+	[MCHP_TC_FUNCTION_INCREASE] = COUNTER_FUNCTION_INCREASE,
+	[MCHP_TC_FUNCTION_QUADRATURE] = COUNTER_FUNCTION_QUADRATURE_X4,
 };
 
 enum mchp_tc_synapse_action {
drivers/counter/stm32-lptimer-cnt.c +3 -3
index 49aeb9e393f3..13656957c45f 100644
@@ -134,9 +134,9 @@ enum stm32_lptim_cnt_function {
 	STM32_LPTIM_ENCODER_BOTH_EDGE,
 };
 
-static const enum counter_count_function stm32_lptim_cnt_functions[] = {
-	[STM32_LPTIM_COUNTER_INCREASE] = COUNTER_COUNT_FUNCTION_INCREASE,
-	[STM32_LPTIM_ENCODER_BOTH_EDGE] = COUNTER_COUNT_FUNCTION_QUADRATURE_X4,
+static const enum counter_function stm32_lptim_cnt_functions[] = {
+	[STM32_LPTIM_COUNTER_INCREASE] = COUNTER_FUNCTION_INCREASE,
+	[STM32_LPTIM_ENCODER_BOTH_EDGE] = COUNTER_FUNCTION_QUADRATURE_X4,
 };
 
 enum stm32_lptim_synapse_action {
drivers/counter/stm32-timer-cnt.c +5 -5
index 603b30ada839..3fb0debd7425 100644
@@ -50,11 +50,11 @@ enum stm32_count_function {
 	STM32_COUNT_ENCODER_MODE_3,
 };
 
-static const enum counter_count_function stm32_count_functions[] = {
-	[STM32_COUNT_SLAVE_MODE_DISABLED] = COUNTER_COUNT_FUNCTION_INCREASE,
-	[STM32_COUNT_ENCODER_MODE_1] = COUNTER_COUNT_FUNCTION_QUADRATURE_X2_A,
-	[STM32_COUNT_ENCODER_MODE_2] = COUNTER_COUNT_FUNCTION_QUADRATURE_X2_B,
-	[STM32_COUNT_ENCODER_MODE_3] = COUNTER_COUNT_FUNCTION_QUADRATURE_X4,
+static const enum counter_function stm32_count_functions[] = {
+	[STM32_COUNT_SLAVE_MODE_DISABLED] = COUNTER_FUNCTION_INCREASE,
+	[STM32_COUNT_ENCODER_MODE_1] = COUNTER_FUNCTION_QUADRATURE_X2_A,
+	[STM32_COUNT_ENCODER_MODE_2] = COUNTER_FUNCTION_QUADRATURE_X2_B,
+	[STM32_COUNT_ENCODER_MODE_3] = COUNTER_FUNCTION_QUADRATURE_X4,
 };
 
 static int stm32_count_read(struct counter_device *counter,
drivers/counter/ti-eqep.c +5 -5
index 878725c2f010..04be25ebf4a4 100644
@@ -284,11 +284,11 @@ static struct counter_signal ti_eqep_signals[] = {
 	},
 };
 
-static const enum counter_count_function ti_eqep_position_functions[] = {
-	[TI_EQEP_COUNT_FUNC_QUAD_COUNT]	= COUNTER_COUNT_FUNCTION_QUADRATURE_X4,
-	[TI_EQEP_COUNT_FUNC_DIR_COUNT]	= COUNTER_COUNT_FUNCTION_PULSE_DIRECTION,
-	[TI_EQEP_COUNT_FUNC_UP_COUNT]	= COUNTER_COUNT_FUNCTION_INCREASE,
-	[TI_EQEP_COUNT_FUNC_DOWN_COUNT]	= COUNTER_COUNT_FUNCTION_DECREASE,
+static const enum counter_function ti_eqep_position_functions[] = {
+	[TI_EQEP_COUNT_FUNC_QUAD_COUNT]	= COUNTER_FUNCTION_QUADRATURE_X4,
+	[TI_EQEP_COUNT_FUNC_DIR_COUNT]	= COUNTER_FUNCTION_PULSE_DIRECTION,
+	[TI_EQEP_COUNT_FUNC_UP_COUNT]	= COUNTER_FUNCTION_INCREASE,
+	[TI_EQEP_COUNT_FUNC_DOWN_COUNT]	= COUNTER_FUNCTION_DECREASE,
 };
 
 static const enum counter_synapse_action ti_eqep_position_synapse_actions[] = {
include/linux/counter.h +10 -10
index 79f5dcaf6ba0..d16ce2819b48 100644
@@ -162,15 +162,15 @@ struct counter_count_ext {
 	void *priv;
 };
 
-enum counter_count_function {
-	COUNTER_COUNT_FUNCTION_INCREASE = 0,
-	COUNTER_COUNT_FUNCTION_DECREASE,
-	COUNTER_COUNT_FUNCTION_PULSE_DIRECTION,
-	COUNTER_COUNT_FUNCTION_QUADRATURE_X1_A,
-	COUNTER_COUNT_FUNCTION_QUADRATURE_X1_B,
-	COUNTER_COUNT_FUNCTION_QUADRATURE_X2_A,
-	COUNTER_COUNT_FUNCTION_QUADRATURE_X2_B,
-	COUNTER_COUNT_FUNCTION_QUADRATURE_X4
+enum counter_function {
+	COUNTER_FUNCTION_INCREASE = 0,
+	COUNTER_FUNCTION_DECREASE,
+	COUNTER_FUNCTION_PULSE_DIRECTION,
+	COUNTER_FUNCTION_QUADRATURE_X1_A,
+	COUNTER_FUNCTION_QUADRATURE_X1_B,
+	COUNTER_FUNCTION_QUADRATURE_X2_A,
+	COUNTER_FUNCTION_QUADRATURE_X2_B,
+	COUNTER_FUNCTION_QUADRATURE_X4
 };
 
 /**
@@ -192,7 +192,7 @@ struct counter_count {
 	const char *name;
 
 	size_t function;
-	const enum counter_count_function *functions_list;
+	const enum counter_function *functions_list;
 	size_t num_functions;
 
 	struct counter_synapse *synapses;
Signature · 1 line
2.30.2
#39 lore raw

PATCH v10 22/33 counter: Internalize sysfs interface code

In reply to William Breathitt Gray

This is a reimplementation of the Generic Counter driver interface. There are no modifications to the Counter subsystem userspace interface, so existing userspace applications should continue to run seamlessly.

The purpose of this patch is to internalize the sysfs interface code among the various counter drivers into a shared module. Counter drivers pass and take data natively (i.e. u8, u64, etc.) and the shared counter module handles the translation between the sysfs interface and the device drivers. This guarantees a standard userspace interface for all counter drivers, and helps generalize the Generic Counter driver ABI in order to support the Generic Counter chrdev interface (introduced in a subsequent patch) without significant changes to the existing counter drivers.

Note, Counter device registration is the same as before: drivers populate a struct counter_device with components and callbacks, then pass the structure to the devm_counter_register function. However, what's different now is how the Counter subsystem code handles this registration internally.

Whereas before callbacks would interact directly with sysfs data, this interaction is now abstracted and instead callbacks interact with native C data types. The counter_comp structure forms the basis for Counter extensions.

The counter-sysfs.c file contains the code to parse through the counter_device structure and register the requested components and extensions. Attributes are created and populated based on type, with respective translation functions to handle the mapping between sysfs and the counter driver callbacks.

The translation performed for each attribute is straightforward: the attribute type and data is parsed from the counter_attribute structure, the respective counter driver read/write callback is called, and sysfs I/O is handled before or after the driver read/write function is called.

Cc Syed Nayyar Waris <[email protected]>
Cc Patrick Havelange <[email protected]>
Cc Kamel Bouhara <[email protected]>
Cc Fabrice Gasnier <[email protected]>
Cc Maxime Coquelin <[email protected]>
Cc Alexandre Torgue <[email protected]>
Cc Dan Carpenter <[email protected]>
---
 MAINTAINERS                             |    1 -
 drivers/counter/104-quad-8.c            |  449 +++----
 drivers/counter/Makefile                |    1 +
 drivers/counter/counter-core.c          |  155 +++
 drivers/counter/counter-sysfs.c         |  846 +++++++++++++
 drivers/counter/counter-sysfs.h         |   13 +
 drivers/counter/counter.c               | 1496 -----------------------
 drivers/counter/ftm-quaddec.c           |   56 +-
 drivers/counter/interrupt-cnt.c         |   62 +-
 drivers/counter/microchip-tcb-capture.c |   93 +-
 drivers/counter/stm32-lptimer-cnt.c     |  162 ++-
 drivers/counter/stm32-timer-cnt.c       |  147 +--
 drivers/counter/ti-eqep.c               |  180 +--
 include/linux/counter.h                 |  629 +++++-----
 include/linux/counter_enum.h            |   45 -
 15 files changed, 1857 insertions(+), 2478 deletions(-)
 create mode 100644 drivers/counter/counter-core.c
 create mode 100644 drivers/counter/counter-sysfs.c
 create mode 100644 drivers/counter/counter-sysfs.h
 delete mode 100644 drivers/counter/counter.c
 delete mode 100644 include/linux/counter_enum.h
MAINTAINERS +0 -1
index ddabf7bb5246..1508db256784 100644
@@ -4581,7 +4581,6 @@ F:	Documentation/ABI/testing/sysfs-bus-counter
 F:	Documentation/driver-api/generic-counter.rst
 F:	drivers/counter/
 F:	include/linux/counter.h
-F:	include/linux/counter_enum.h
 
 CPMAC ETHERNET DRIVER
 M:	Florian Fainelli <[email protected]>
drivers/counter/104-quad-8.c +191 -258

796 lines not on this page · raw message

drivers/counter/Makefile +1 -0
index cb646ed2f039..9a31394cb926 100644
@@ -4,6 +4,7 @@
 #
 
 obj-$(CONFIG_COUNTER) += counter.o
+counter-y := counter-core.o counter-sysfs.o
 
 obj-$(CONFIG_104_QUAD_8)	+= 104-quad-8.o
 obj-$(CONFIG_INTERRUPT_CNT)		+= interrupt-cnt.o
drivers/counter/counter-core.c new file +155 -0

155 lines not on this page · raw message

drivers/counter/counter-sysfs.c new file +846 -0

846 lines not on this page · raw message

drivers/counter/counter-sysfs.h new file +13 -0
new file mode 100644
index 000000000000..14fe566aca0e
@@ -0,0 +1,13 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Counter sysfs interface
+ * Copyright (C) 2020 William Breathitt Gray
+ */
+#ifndef _COUNTER_SYSFS_H_
+#define _COUNTER_SYSFS_H_
+
+#include <linux/counter.h>
+
+int counter_sysfs_add(struct counter_device *const counter);
+
+#endif /* _COUNTER_SYSFS_H_ */
drivers/counter/counter.c deleted +0 -1496

1,176 lines not on this page · raw message

drivers/counter/ftm-quaddec.c +23 -33

56 lines not on this page · raw message

drivers/counter/interrupt-cnt.c +26 -36

62 lines not on this page · raw message

drivers/counter/microchip-tcb-capture.c +40 -53

93 lines not on this page · raw message

drivers/counter/stm32-lptimer-cnt.c +79 -83

162 lines not on this page · raw message

drivers/counter/stm32-timer-cnt.c +59 -88

147 lines not on this page · raw message

drivers/counter/ti-eqep.c +98 -82

180 lines not on this page · raw message

include/linux/counter.h +326 -303

629 lines not on this page · raw message

include/linux/counter_enum.h deleted +0 -45

45 lines not on this page · raw message

The rest of this diff is not shown. View the raw message.

Signature · 1 line
2.30.2

Part of the diff is not shown here. View the raw message.

maintainer
#40 lore raw

Re: [Linux-stm32] [PATCH v10 22/33] counter: Internalize sysfs interface code

Quoted 157 lines · William Breathitt Gray

This is a reimplementation of the Generic Counter driver interface. There are no modifications to the Counter subsystem userspace interface, so existing userspace applications should continue to run seamlessly.

The purpose of this patch is to internalize the sysfs interface code among the various counter drivers into a shared module. Counter drivers pass and take data natively (i.e. u8, u64, etc.) and the shared counter module handles the translation between the sysfs interface and the device drivers. This guarantees a standard userspace interface for all counter drivers, and helps generalize the Generic Counter driver ABI in order to support the Generic Counter chrdev interface (introduced in a subsequent patch) without significant changes to the existing counter drivers.

Note, Counter device registration is the same as before: drivers populate a struct counter_device with components and callbacks, then pass the structure to the devm_counter_register function. However, what's different now is how the Counter subsystem code handles this registration internally.

Whereas before callbacks would interact directly with sysfs data, this interaction is now abstracted and instead callbacks interact with native C data types. The counter_comp structure forms the basis for Counter extensions.

The counter-sysfs.c file contains the code to parse through the counter_device structure and register the requested components and extensions. Attributes are created and populated based on type, with respective translation functions to handle the mapping between sysfs and the counter driver callbacks.

The translation performed for each attribute is straightforward: the attribute type and data is parsed from the counter_attribute structure, the respective counter driver read/write callback is called, and sysfs I/O is handled before or after the driver read/write function is called.

Cc Syed Nayyar Waris <[email protected]>
Cc Patrick Havelange <[email protected]>
Cc Kamel Bouhara <[email protected]>
Cc Fabrice Gasnier <[email protected]>
Cc Maxime Coquelin <[email protected]>
Cc Alexandre Torgue <[email protected]>
Cc Dan Carpenter <[email protected]>
---
 MAINTAINERS                             |    1 -
 drivers/counter/104-quad-8.c            |  449 +++----
 drivers/counter/Makefile                |    1 +
 drivers/counter/counter-core.c          |  155 +++
 drivers/counter/counter-sysfs.c         |  846 +++++++++++++
 drivers/counter/counter-sysfs.h         |   13 +
 drivers/counter/counter.c               | 1496 -----------------------
 drivers/counter/ftm-quaddec.c           |   56 +-
 drivers/counter/interrupt-cnt.c         |   62 +-
 drivers/counter/microchip-tcb-capture.c |   93 +-
 drivers/counter/stm32-lptimer-cnt.c     |  162 ++-
 drivers/counter/stm32-timer-cnt.c       |  147 +--
 drivers/counter/ti-eqep.c               |  180 +--
 include/linux/counter.h                 |  629 +++++-----
 include/linux/counter_enum.h            |   45 -
 15 files changed, 1857 insertions(+), 2478 deletions(-)
 create mode 100644 drivers/counter/counter-core.c
 create mode 100644 drivers/counter/counter-sysfs.c
 create mode 100644 drivers/counter/counter-sysfs.h
 delete mode 100644 drivers/counter/counter.c
 delete mode 100644 include/linux/counter_enum.h
MAINTAINERS +0 -1
index ddabf7bb5246..1508db256784 100644
@@ -4581,7 +4581,6 @@ F:	Documentation/ABI/testing/sysfs-bus-counter
 F:	Documentation/driver-api/generic-counter.rst
 F:	drivers/counter/
 F:	include/linux/counter.h
-F:	include/linux/counter_enum.h
 
 CPMAC ETHERNET DRIVER
 M:	Florian Fainelli <[email protected]>
drivers/counter/104-quad-8.c +13 -19
index 5a49ace2d4a6..eb7d63769f4c 100644
@@ -116,7 +116,7 @@ static int quad8_signal_read(struct counter_device *counter,
 }
 
 static int quad8_count_read(struct counter_device *counter,
-	struct counter_count *count, unsigned long *val)
+			    struct counter_count *count, u64 *val)
 {
 	struct quad8 *const priv = counter->priv;
 	const int base_offset = priv->base + 2 * count->id;
@@ -147,7 +147,7 @@ static int quad8_count_read(struct counter_device *counter,
 }
 
 static int quad8_count_write(struct counter_device *counter,
-	struct counter_count *count, unsigned long val)
+			     struct counter_count *count, u64 val)
 {
 	struct quad8 *const priv = counter->priv;
 	const int base_offset = priv->base + 2 * count->id;
@@ -187,22 +187,16 @@ static int quad8_count_write(struct counter_device *counter,
 	return 0;
 }
 
-enum quad8_count_function {
-	QUAD8_COUNT_FUNCTION_PULSE_DIRECTION = 0,
-	QUAD8_COUNT_FUNCTION_QUADRATURE_X1,
-	QUAD8_COUNT_FUNCTION_QUADRATURE_X2,
-	QUAD8_COUNT_FUNCTION_QUADRATURE_X4
-};
-
 static const enum counter_function quad8_count_functions_list[] = {
-	[QUAD8_COUNT_FUNCTION_PULSE_DIRECTION] = COUNTER_FUNCTION_PULSE_DIRECTION,
-	[QUAD8_COUNT_FUNCTION_QUADRATURE_X1] = COUNTER_FUNCTION_QUADRATURE_X1_A,
-	[QUAD8_COUNT_FUNCTION_QUADRATURE_X2] = COUNTER_FUNCTION_QUADRATURE_X2_A,
-	[QUAD8_COUNT_FUNCTION_QUADRATURE_X4] = COUNTER_FUNCTION_QUADRATURE_X4
+	COUNTER_FUNCTION_PULSE_DIRECTION,
+	COUNTER_FUNCTION_QUADRATURE_X1_A,
+	COUNTER_FUNCTION_QUADRATURE_X2_A,
+	COUNTER_FUNCTION_QUADRATURE_X4,
 };
 
-static int quad8_function_get(struct counter_device *counter,
-	struct counter_count *count, size_t *function)
+static int quad8_function_read(struct counter_device *counter,
+			       struct counter_count *count,
+			       enum counter_function *function)
 {
 	struct quad8 *const priv = counter->priv;
 	const int id = count->id;
@@ -212,25 +206,26 @@ static int quad8_function_get(struct counter_device *counter,
 	if (priv->quadrature_mode[id])
 		switch (priv->quadrature_scale[id]) {
 		case 0:
-			*function = QUAD8_COUNT_FUNCTION_QUADRATURE_X1;
+			*function = COUNTER_FUNCTION_QUADRATURE_X1_A;
 			break;
 		case 1:
-			*function = QUAD8_COUNT_FUNCTION_QUADRATURE_X2;
+			*function = COUNTER_FUNCTION_QUADRATURE_X2_A;
 			break;
 		case 2:
-			*function = QUAD8_COUNT_FUNCTION_QUADRATURE_X4;
+			*function = COUNTER_FUNCTION_QUADRATURE_X4;
 			break;
 		}
 	else
-		*function = QUAD8_COUNT_FUNCTION_PULSE_DIRECTION;
+		*function = COUNTER_FUNCTION_PULSE_DIRECTION;
 
 	mutex_unlock(&priv->lock);
 
 	return 0;
 }

[snip]

Quoted 14 lines

static const struct atmel_tcb_config tcb_rm9200_config = {

drivers/counter/stm32-lptimer-cnt.c +1 -0
index 13656957c45f..aef78a4217b5 100644
@@ -17,6 +17,7 @@
 #include <linux/module.h>
 #include <linux/pinctrl/consumer.h>
 #include <linux/platform_device.h>
+#include <linux/types.h>
 
 struct stm32_lptim_cnt {
 	struct counter_device counter;

drivers/counter/stm32-lptimer-cnt.c static int stm32_lptim_setup(struct stm32_lptim_cnt *priv, int enable) · line 135

Quoted 7 lines
drivers/counter/stm32-lptimer-cnt.c +2 -2
@@ -130,32 +131,46 @@ static int stm32_lptim_setup(struct stm32_lptim_cnt *priv, int enable)
  * +---------+----------+----------+---------+----------+---------+
  */
 enum stm32_lptim_cnt_function {
-	STM32_LPTIM_COUNTER_INCREASE,
-	STM32_LPTIM_ENCODER_BOTH_EDGE,
+	STM32_LPTIM_COUNTER_INCREASE = COUNTER_FUNCTION_INCREASE,
+	STM32_LPTIM_ENCODER_BOTH_EDGE = COUNTER_FUNCTION_QUADRATURE_X4,

Hi William,

I'm wondering if this enum is still necessary. I noticed the enum is removed from the 104-quad-8 driver.

drivers/counter/stm32-lptimer-cnt.c static int stm32_lptim_setup(struct stm32_lptim_cnt *priv, int enable) · line 144

Quoted 11 lines
drivers/counter/stm32-lptimer-cnt.c +3 -2
 };
 
 static const enum counter_function stm32_lptim_cnt_functions[] = {
-	[STM32_LPTIM_COUNTER_INCREASE] = COUNTER_FUNCTION_INCREASE,
-	[STM32_LPTIM_ENCODER_BOTH_EDGE] = COUNTER_FUNCTION_QUADRATURE_X4,
+	STM32_LPTIM_COUNTER_INCREASE,
+	STM32_LPTIM_ENCODER_BOTH_EDGE,
 };
 
 enum stm32_lptim_synapse_action {
+	/* Index must match with stm32_lptim_cnt_polarity[] (priv->polarity) */

Arf... I forgot to update this comment in earlier commit:
d8ac6b4 counter: stm32-lptimer-cnt: remove iio counter abi

"stm32_lptim_cnt_polarity" doesn't exist anymore. So, this comment can be updated. This should match the priv->polarity, as it's used to write the "CKPOL" bits (e.g. 0x0 for rising, 0x1 falling, 0x2 both).

Or do you wish I send a separate patch ?

Quoted 19 lines
drivers/counter/stm32-lptimer-cnt.c +8 -2
 	STM32_LPTIM_SYNAPSE_ACTION_RISING_EDGE,
 	STM32_LPTIM_SYNAPSE_ACTION_FALLING_EDGE,
 	STM32_LPTIM_SYNAPSE_ACTION_BOTH_EDGES,
 	STM32_LPTIM_SYNAPSE_ACTION_NONE,
 };
 
-static const enum counter_synapse_action stm32_lptim_cnt_synapse_actions[] = {
-	/* Index must match with stm32_lptim_cnt_polarity[] (priv->polarity) */
+static const enum stm32_lptim_synapse_action stm32_lptim_c2l_actions_map[] = {
+	[COUNTER_SYNAPSE_ACTION_RISING_EDGE] = STM32_LPTIM_SYNAPSE_ACTION_RISING_EDGE,
+	[COUNTER_SYNAPSE_ACTION_FALLING_EDGE] = STM32_LPTIM_SYNAPSE_ACTION_FALLING_EDGE,
+	[COUNTER_SYNAPSE_ACTION_BOTH_EDGES] = STM32_LPTIM_SYNAPSE_ACTION_BOTH_EDGES,
+	[COUNTER_SYNAPSE_ACTION_NONE] = STM32_LPTIM_SYNAPSE_ACTION_NONE,
+};
+
+static const enum counter_synapse_action stm32_lptim_l2c_actions_map[] = {
 	[STM32_LPTIM_SYNAPSE_ACTION_RISING_EDGE] = COUNTER_SYNAPSE_ACTION_RISING_EDGE,
 	[STM32_LPTIM_SYNAPSE_ACTION_FALLING_EDGE] = COUNTER_SYNAPSE_ACTION_FALLING_EDGE,
 	[STM32_LPTIM_SYNAPSE_ACTION_BOTH_EDGES] = COUNTER_SYNAPSE_ACTION_BOTH_EDGES,

drivers/counter/stm32-lptimer-cnt.c static int stm32_lptim_setup(struct stm32_lptim_cnt *priv, int enable) · line 171

Quoted 10 lines
drivers/counter/stm32-lptimer-cnt.c +7 -0
 	[STM32_LPTIM_SYNAPSE_ACTION_NONE] = COUNTER_SYNAPSE_ACTION_NONE,
 };
 
+static const enum counter_synapse_action stm32_lptim_cnt_synapse_actions[] = {
+	COUNTER_SYNAPSE_ACTION_RISING_EDGE,
+	COUNTER_SYNAPSE_ACTION_FALLING_EDGE,
+	COUNTER_SYNAPSE_ACTION_BOTH_EDGES,
+	COUNTER_SYNAPSE_ACTION_NONE,
+};
+

I'm getting confused with the two table entries, and the two enums that are very similar. Could it be simplified ?

I'm thinking of something more straight-forward... in fact only one array should be enough, to convert from synapse action to CKPOL value before it's written to register in stm32_lptim_setup() routine. This should be easier now that the iio part has been removed.

Quoted 206 lines
drivers/counter/stm32-lptimer-cnt.c +47 -63
 static int stm32_lptim_cnt_read(struct counter_device *counter,
-				struct counter_count *count, unsigned long *val)
+				struct counter_count *count, u64 *val)
 {
 	struct stm32_lptim_cnt *const priv = counter->priv;
 	u32 cnt;
@@ -170,9 +185,9 @@ static int stm32_lptim_cnt_read(struct counter_device *counter,
 	return 0;
 }
 
-static int stm32_lptim_cnt_function_get(struct counter_device *counter,
-					struct counter_count *count,
-					size_t *function)
+static int stm32_lptim_cnt_function_read(struct counter_device *counter,
+					 struct counter_count *count,
+					 enum counter_function *function)
 {
 	struct stm32_lptim_cnt *const priv = counter->priv;
 
@@ -189,9 +204,9 @@ static int stm32_lptim_cnt_function_get(struct counter_device *counter,
 	return -EINVAL;
 }
 
-static int stm32_lptim_cnt_function_set(struct counter_device *counter,
-					struct counter_count *count,
-					size_t function)
+static int stm32_lptim_cnt_function_write(struct counter_device *counter,
+					  struct counter_count *count,
+					  enum counter_function function)
 {
 	struct stm32_lptim_cnt *const priv = counter->priv;
 
@@ -212,9 +227,9 @@ static int stm32_lptim_cnt_function_set(struct counter_device *counter,
 	}
 }
 
-static ssize_t stm32_lptim_cnt_enable_read(struct counter_device *counter,
-					   struct counter_count *count,
-					   void *private, char *buf)
+static int stm32_lptim_cnt_enable_read(struct counter_device *counter,
+				       struct counter_count *count,
+				       u8 *enable)
 {
 	struct stm32_lptim_cnt *const priv = counter->priv;
 	int ret;
@@ -223,22 +238,18 @@ static ssize_t stm32_lptim_cnt_enable_read(struct counter_device *counter,
 	if (ret < 0)
 		return ret;
 
-	return scnprintf(buf, PAGE_SIZE, "%u\n", ret);
+	*enable = ret;
+
+	return 0;
 }
 
-static ssize_t stm32_lptim_cnt_enable_write(struct counter_device *counter,
-					    struct counter_count *count,
-					    void *private,
-					    const char *buf, size_t len)
+static int stm32_lptim_cnt_enable_write(struct counter_device *counter,
+					struct counter_count *count,
+					u8 enable)
 {
 	struct stm32_lptim_cnt *const priv = counter->priv;
-	bool enable;
 	int ret;
 
-	ret = kstrtobool(buf, &enable);
-	if (ret)
-		return ret;
-
 	/* Check nobody uses the timer, or already disabled/enabled */
 	ret = stm32_lptim_is_enabled(priv);
 	if ((ret < 0) || (!ret && !enable))
@@ -254,65 +265,54 @@ static ssize_t stm32_lptim_cnt_enable_write(struct counter_device *counter,
 	if (ret)
 		return ret;
 
-	return len;
+	return 0;
 }
 
-static ssize_t stm32_lptim_cnt_ceiling_read(struct counter_device *counter,
-					    struct counter_count *count,
-					    void *private, char *buf)
+static int stm32_lptim_cnt_ceiling_read(struct counter_device *counter,
+					struct counter_count *count,
+					u64 *ceiling)
 {
 	struct stm32_lptim_cnt *const priv = counter->priv;
 
-	return snprintf(buf, PAGE_SIZE, "%u\n", priv->ceiling);
+	*ceiling = priv->ceiling;
+
+	return 0;
 }
 
-static ssize_t stm32_lptim_cnt_ceiling_write(struct counter_device *counter,
-					     struct counter_count *count,
-					     void *private,
-					     const char *buf, size_t len)
+static int stm32_lptim_cnt_ceiling_write(struct counter_device *counter,
+					 struct counter_count *count,
+					 u64 ceiling)
 {
 	struct stm32_lptim_cnt *const priv = counter->priv;
-	unsigned int ceiling;
-	int ret;
 
 	if (stm32_lptim_is_enabled(priv))
 		return -EBUSY;
 
-	ret = kstrtouint(buf, 0, &ceiling);
-	if (ret)
-		return ret;
-
 	if (ceiling > STM32_LPTIM_MAX_ARR)
 		return -ERANGE;
 
 	priv->ceiling = ceiling;
 
-	return len;
+	return 0;
 }
 
-static const struct counter_count_ext stm32_lptim_cnt_ext[] = {
-	{
-		.name = "enable",
-		.read = stm32_lptim_cnt_enable_read,
-		.write = stm32_lptim_cnt_enable_write
-	},
-	{
-		.name = "ceiling",
-		.read = stm32_lptim_cnt_ceiling_read,
-		.write = stm32_lptim_cnt_ceiling_write
-	},
+static struct counter_comp stm32_lptim_cnt_ext[] = {
+	COUNTER_COMP_ENABLE(stm32_lptim_cnt_enable_read,
+			    stm32_lptim_cnt_enable_write),
+	COUNTER_COMP_CEILING(stm32_lptim_cnt_ceiling_read,
+			     stm32_lptim_cnt_ceiling_write),
 };
 
-static int stm32_lptim_cnt_action_get(struct counter_device *counter,
-				      struct counter_count *count,
-				      struct counter_synapse *synapse,
-				      size_t *action)
+static int stm32_lptim_cnt_action_read(struct counter_device *counter,
+				       struct counter_count *count,
+				       struct counter_synapse *synapse,
+				       enum counter_synapse_action *action)
 {
 	struct stm32_lptim_cnt *const priv = counter->priv;
-	size_t function;
+	enum counter_function function;
 	int err;
 
-	err = stm32_lptim_cnt_function_get(counter, count, &function);
+	err = stm32_lptim_cnt_function_read(counter, count, &function);
 	if (err)
 		return err;
 
@@ -320,12 +320,12 @@ static int stm32_lptim_cnt_action_get(struct counter_device *counter,
 	case STM32_LPTIM_COUNTER_INCREASE:
 		/* LP Timer acts as up-counter on input 1 */
 		if (synapse->signal->id == count->synapses[0].signal->id)
-			*action = priv->polarity;
+			*action = stm32_lptim_l2c_actions_map[priv->polarity];
 		else
-			*action = STM32_LPTIM_SYNAPSE_ACTION_NONE;
+			*action = COUNTER_SYNAPSE_ACTION_NONE;
 		return 0;
 	case STM32_LPTIM_ENCODER_BOTH_EDGE:
-		*action = priv->polarity;
+		*action = stm32_lptim_l2c_actions_map[priv->polarity];
 		return 0;
 	default:
 		/* should never reach this path */
@@ -333,43 +333,39 @@ static int stm32_lptim_cnt_action_get(struct counter_device *counter,
 	}
 }
 
-static int stm32_lptim_cnt_action_set(struct counter_device *counter,
-				      struct counter_count *count,
-				      struct counter_synapse *synapse,
-				      size_t action)
+static int stm32_lptim_cnt_action_write(struct counter_device *counter,
+					struct counter_count *count,
+					struct counter_synapse *synapse,
+					enum counter_synapse_action action)
 {
 	struct stm32_lptim_cnt *const priv = counter->priv;
-	size_t function;
+	enum counter_function function;
 	int err;
 
 	if (stm32_lptim_is_enabled(priv))
 		return -EBUSY;
 
-	err = stm32_lptim_cnt_function_get(counter, count, &function);
+	err = stm32_lptim_cnt_function_read(counter, count, &function);
 	if (err)
 		return err;
 
 	/* only set polarity when in counter mode (on input 1) */
-	if (function == STM32_LPTIM_COUNTER_INCREASE

drivers/counter/stm32-lptimer-cnt.c static int stm32_lptim_cnt_action_get(struct counter_device *counter, · line 353

Quoted 10 lines
drivers/counter/stm32-lptimer-cnt.c +1 -9
-	    && synapse->signal->id == count->synapses[0].signal->id) {
-		switch (action) {
-		case STM32_LPTIM_SYNAPSE_ACTION_RISING_EDGE:
-		case STM32_LPTIM_SYNAPSE_ACTION_FALLING_EDGE:
-		case STM32_LPTIM_SYNAPSE_ACTION_BOTH_EDGES:
-			priv->polarity = action;
-			return 0;
-		}
-	}
+	if ((enum stm32_lptim_cnt_function)function != STM32_LPTIM_COUNTER_INCREASE

Could COUNTER_FUNCTION_INCREASE be used directly here, to avoid casting ?

Quoted 36 lines
drivers/counter/stm32-lptimer-cnt.c +10 -5
+	    || synapse->signal->id != count->synapses[0].signal->id
+	    || action == COUNTER_SYNAPSE_ACTION_NONE)
+		return -EINVAL;
 
-	return -EINVAL;
+	priv->polarity = stm32_lptim_c2l_actions_map[action];
+
+	return 0;
 }
 
 static const struct counter_ops stm32_lptim_cnt_ops = {
 	.count_read = stm32_lptim_cnt_read,
-	.function_get = stm32_lptim_cnt_function_get,
-	.function_set = stm32_lptim_cnt_function_set,
-	.action_get = stm32_lptim_cnt_action_get,
-	.action_set = stm32_lptim_cnt_action_set,
+	.function_read = stm32_lptim_cnt_function_read,
+	.function_write = stm32_lptim_cnt_function_write,
+	.action_read = stm32_lptim_cnt_action_read,
+	.action_write = stm32_lptim_cnt_action_write,
 };
 
 static struct counter_signal stm32_lptim_cnt_signals[] = {
drivers/counter/stm32-timer-cnt.c +1 -0
index 3fb0debd7425..c690b76e5dab 100644
@@ -13,6 +13,7 @@
 #include <linux/module.h>
 #include <linux/pinctrl/consumer.h>
 #include <linux/platform_device.h>
+#include <linux/types.h>
 
 #define TIM_CCMR_CCXS	(BIT(8) | BIT(0))
 #define TIM_CCMR_MASK	(TIM_CCMR_CC1S | TIM_CCMR_CC2S | \

drivers/counter/stm32-timer-cnt.c struct stm32_timer_cnt { · line 53

Quoted 9 lines
drivers/counter/stm32-timer-cnt.c +6 -0
@@ -44,21 +45,21 @@ struct stm32_timer_cnt {
  * @STM32_COUNT_ENCODER_MODE_3: counts on both TI1FP1 and TI2FP2 edges
  */
 enum stm32_count_function {
+	STM32_COUNT_SLAVE_MODE_DISABLED = COUNTER_FUNCTION_INCREASE,
+	STM32_COUNT_ENCODER_MODE_1 = COUNTER_FUNCTION_QUADRATURE_X2_A,
+	STM32_COUNT_ENCODER_MODE_2 = COUNTER_FUNCTION_QUADRATURE_X2_B,
+	STM32_COUNT_ENCODER_MODE_3 = COUNTER_FUNCTION_QUADRATURE_X4,
+};
+

Same as for the LPTIM driver above, I noticed the enum is removed from the 104-quad-8 driver.

I'm fine both ways... I just feel like this could be more consistent later in the function read/write routines to report enum from the counter_function definition (e.g. like COUNTER_FUNCTION_QUADRATURE_X4 instead of STM32_COUNT_ENCODER_MODE_3).

Thanks,
Fabrice

Quoted 1,364 lines
drivers/counter/stm32-timer-cnt.c +52 -88
+static const enum counter_function stm32_count_functions[] = {
 	STM32_COUNT_SLAVE_MODE_DISABLED,
 	STM32_COUNT_ENCODER_MODE_1,
 	STM32_COUNT_ENCODER_MODE_2,
 	STM32_COUNT_ENCODER_MODE_3,
 };
 
-static const enum counter_function stm32_count_functions[] = {
-	[STM32_COUNT_SLAVE_MODE_DISABLED] = COUNTER_FUNCTION_INCREASE,
-	[STM32_COUNT_ENCODER_MODE_1] = COUNTER_FUNCTION_QUADRATURE_X2_A,
-	[STM32_COUNT_ENCODER_MODE_2] = COUNTER_FUNCTION_QUADRATURE_X2_B,
-	[STM32_COUNT_ENCODER_MODE_3] = COUNTER_FUNCTION_QUADRATURE_X4,
-};
-
 static int stm32_count_read(struct counter_device *counter,
-			    struct counter_count *count, unsigned long *val)
+			    struct counter_count *count, u64 *val)
 {
 	struct stm32_timer_cnt *const priv = counter->priv;
 	u32 cnt;
@@ -70,8 +71,7 @@ static int stm32_count_read(struct counter_device *counter,
 }
 
 static int stm32_count_write(struct counter_device *counter,
-			     struct counter_count *count,
-			     const unsigned long val)
+			     struct counter_count *count, const u64 val)
 {
 	struct stm32_timer_cnt *const priv = counter->priv;
 	u32 ceiling;
@@ -83,9 +83,9 @@ static int stm32_count_write(struct counter_device *counter,
 	return regmap_write(priv->regmap, TIM_CNT, val);
 }
 
-static int stm32_count_function_get(struct counter_device *counter,
-				    struct counter_count *count,
-				    size_t *function)
+static int stm32_count_function_read(struct counter_device *counter,
+				     struct counter_count *count,
+				     enum counter_function *function)
 {
 	struct stm32_timer_cnt *const priv = counter->priv;
 	u32 smcr;
@@ -110,9 +110,9 @@ static int stm32_count_function_get(struct counter_device *counter,
 	}
 }
 
-static int stm32_count_function_set(struct counter_device *counter,
-				    struct counter_count *count,
-				    size_t function)
+static int stm32_count_function_write(struct counter_device *counter,
+				      struct counter_count *count,
+				      enum counter_function function)
 {
 	struct stm32_timer_cnt *const priv = counter->priv;
 	u32 cr1, sms;
@@ -150,44 +150,37 @@ static int stm32_count_function_set(struct counter_device *counter,
 	return 0;
 }
 
-static ssize_t stm32_count_direction_read(struct counter_device *counter,
+static int stm32_count_direction_read(struct counter_device *counter,
 				      struct counter_count *count,
-				      void *private, char *buf)
+				      enum counter_count_direction *direction)
 {
 	struct stm32_timer_cnt *const priv = counter->priv;
-	const char *direction;
 	u32 cr1;
 
 	regmap_read(priv->regmap, TIM_CR1, &cr1);
-	direction = (cr1 & TIM_CR1_DIR) ? "backward" : "forward";
+	*direction = (cr1 & TIM_CR1_DIR) ? COUNTER_COUNT_DIRECTION_BACKWARD :
+		COUNTER_COUNT_DIRECTION_FORWARD;
 
-	return scnprintf(buf, PAGE_SIZE, "%s\n", direction);
+	return 0;
 }
 
-static ssize_t stm32_count_ceiling_read(struct counter_device *counter,
-					struct counter_count *count,
-					void *private, char *buf)
+static int stm32_count_ceiling_read(struct counter_device *counter,
+				    struct counter_count *count, u64 *ceiling)
 {
 	struct stm32_timer_cnt *const priv = counter->priv;
 	u32 arr;
 
 	regmap_read(priv->regmap, TIM_ARR, &arr);
 
-	return snprintf(buf, PAGE_SIZE, "%u\n", arr);
+	*ceiling = arr;
+
+	return 0;
 }
 
-static ssize_t stm32_count_ceiling_write(struct counter_device *counter,
-					 struct counter_count *count,
-					 void *private,
-					 const char *buf, size_t len)
+static int stm32_count_ceiling_write(struct counter_device *counter,
+				     struct counter_count *count, u64 ceiling)
 {
 	struct stm32_timer_cnt *const priv = counter->priv;
-	unsigned int ceiling;
-	int ret;
-
-	ret = kstrtouint(buf, 0, &ceiling);
-	if (ret)
-		return ret;
 
 	if (ceiling > priv->max_arr)
 		return -ERANGE;
@@ -196,34 +189,27 @@ static ssize_t stm32_count_ceiling_write(struct counter_device *counter,
 	regmap_update_bits(priv->regmap, TIM_CR1, TIM_CR1_ARPE, 0);
 	regmap_write(priv->regmap, TIM_ARR, ceiling);
 
-	return len;
+	return 0;
 }
 
-static ssize_t stm32_count_enable_read(struct counter_device *counter,
-				       struct counter_count *count,
-				       void *private, char *buf)
+static int stm32_count_enable_read(struct counter_device *counter,
+				   struct counter_count *count, u8 *enable)
 {
 	struct stm32_timer_cnt *const priv = counter->priv;
 	u32 cr1;
 
 	regmap_read(priv->regmap, TIM_CR1, &cr1);
 
-	return scnprintf(buf, PAGE_SIZE, "%d\n", (bool)(cr1 & TIM_CR1_CEN));
+	*enable = cr1 & TIM_CR1_CEN;
+
+	return 0;
 }
 
-static ssize_t stm32_count_enable_write(struct counter_device *counter,
-					struct counter_count *count,
-					void *private,
-					const char *buf, size_t len)
+static int stm32_count_enable_write(struct counter_device *counter,
+				    struct counter_count *count, u8 enable)
 {
 	struct stm32_timer_cnt *const priv = counter->priv;
-	int err;
 	u32 cr1;
-	bool enable;
-
-	err = kstrtobool(buf, &enable);
-	if (err)
-		return err;
 
 	if (enable) {
 		regmap_read(priv->regmap, TIM_CR1, &cr1);
@@ -242,70 +228,55 @@ static ssize_t stm32_count_enable_write(struct counter_device *counter,
 	/* Keep enabled state to properly handle low power states */
 	priv->enabled = enable;
 
-	return len;
+	return 0;
 }
 
-static const struct counter_count_ext stm32_count_ext[] = {
-	{
-		.name = "direction",
-		.read = stm32_count_direction_read,
-	},
-	{
-		.name = "enable",
-		.read = stm32_count_enable_read,
-		.write = stm32_count_enable_write
-	},
-	{
-		.name = "ceiling",
-		.read = stm32_count_ceiling_read,
-		.write = stm32_count_ceiling_write
-	},
-};
-
-enum stm32_synapse_action {
-	STM32_SYNAPSE_ACTION_NONE,
-	STM32_SYNAPSE_ACTION_BOTH_EDGES
+static struct counter_comp stm32_count_ext[] = {
+	COUNTER_COMP_DIRECTION(stm32_count_direction_read),
+	COUNTER_COMP_ENABLE(stm32_count_enable_read, stm32_count_enable_write),
+	COUNTER_COMP_CEILING(stm32_count_ceiling_read,
+			     stm32_count_ceiling_write),
 };
 
 static const enum counter_synapse_action stm32_synapse_actions[] = {
-	[STM32_SYNAPSE_ACTION_NONE] = COUNTER_SYNAPSE_ACTION_NONE,
-	[STM32_SYNAPSE_ACTION_BOTH_EDGES] = COUNTER_SYNAPSE_ACTION_BOTH_EDGES
+	COUNTER_SYNAPSE_ACTION_NONE,
+	COUNTER_SYNAPSE_ACTION_BOTH_EDGES
 };
 
-static int stm32_action_get(struct counter_device *counter,
-			    struct counter_count *count,
-			    struct counter_synapse *synapse,
-			    size_t *action)
+static int stm32_action_read(struct counter_device *counter,
+			     struct counter_count *count,
+			     struct counter_synapse *synapse,
+			     enum counter_synapse_action *action)
 {
-	size_t function;
+	enum counter_function function;
 	int err;
 
-	err = stm32_count_function_get(counter, count, &function);
+	err = stm32_count_function_read(counter, count, &function);
 	if (err)
 		return err;
 
 	switch (function) {
 	case STM32_COUNT_SLAVE_MODE_DISABLED:
 		/* counts on internal clock when CEN=1 */
-		*action = STM32_SYNAPSE_ACTION_NONE;
+		*action = COUNTER_SYNAPSE_ACTION_NONE;
 		return 0;
 	case STM32_COUNT_ENCODER_MODE_1:
 		/* counts up/down on TI1FP1 edge depending on TI2FP2 level */
 		if (synapse->signal->id == count->synapses[0].signal->id)
-			*action = STM32_SYNAPSE_ACTION_BOTH_EDGES;
+			*action = COUNTER_SYNAPSE_ACTION_BOTH_EDGES;
 		else
-			*action = STM32_SYNAPSE_ACTION_NONE;
+			*action = COUNTER_SYNAPSE_ACTION_NONE;
 		return 0;
 	case STM32_COUNT_ENCODER_MODE_2:
 		/* counts up/down on TI2FP2 edge depending on TI1FP1 level */
 		if (synapse->signal->id == count->synapses[1].signal->id)
-			*action = STM32_SYNAPSE_ACTION_BOTH_EDGES;
+			*action = COUNTER_SYNAPSE_ACTION_BOTH_EDGES;
 		else
-			*action = STM32_SYNAPSE_ACTION_NONE;
+			*action = COUNTER_SYNAPSE_ACTION_NONE;
 		return 0;
 	case STM32_COUNT_ENCODER_MODE_3:
 		/* counts up/down on both TI1FP1 and TI2FP2 edges */
-		*action = STM32_SYNAPSE_ACTION_BOTH_EDGES;
+		*action = COUNTER_SYNAPSE_ACTION_BOTH_EDGES;
 		return 0;
 	default:
 		return -EINVAL;
@@ -315,9 +286,9 @@ static int stm32_action_get(struct counter_device *counter,
 static const struct counter_ops stm32_timer_cnt_ops = {
 	.count_read = stm32_count_read,
 	.count_write = stm32_count_write,
-	.function_get = stm32_count_function_get,
-	.function_set = stm32_count_function_set,
-	.action_get = stm32_action_get,
+	.function_read = stm32_count_function_read,
+	.function_write = stm32_count_function_write,
+	.action_read = stm32_action_read,
 };
 
 static struct counter_signal stm32_signals[] = {
drivers/counter/ti-eqep.c +98 -82
index 04be25ebf4a4..6ff53d3164f5 100644
@@ -13,6 +13,7 @@
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
 #include <linux/regmap.h>
+#include <linux/types.h>
 
 /* 32-bit registers */
 #define QPOSCNT		0x0
@@ -73,19 +74,13 @@ enum {
 };
 
 /* Position Counter Input Modes */
-enum {
+enum ti_eqep_count_func {
 	TI_EQEP_COUNT_FUNC_QUAD_COUNT,
 	TI_EQEP_COUNT_FUNC_DIR_COUNT,
 	TI_EQEP_COUNT_FUNC_UP_COUNT,
 	TI_EQEP_COUNT_FUNC_DOWN_COUNT,
 };
 
-enum {
-	TI_EQEP_SYNAPSE_ACTION_BOTH_EDGES,
-	TI_EQEP_SYNAPSE_ACTION_RISING_EDGE,
-	TI_EQEP_SYNAPSE_ACTION_NONE,
-};
-
 struct ti_eqep_cnt {
 	struct counter_device counter;
 	struct regmap *regmap32;
@@ -93,7 +88,7 @@ struct ti_eqep_cnt {
 };
 
 static int ti_eqep_count_read(struct counter_device *counter,
-			      struct counter_count *count, unsigned long *val)
+			      struct counter_count *count, u64 *val)
 {
 	struct ti_eqep_cnt *priv = counter->priv;
 	u32 cnt;
@@ -105,7 +100,7 @@ static int ti_eqep_count_read(struct counter_device *counter,
 }
 
 static int ti_eqep_count_write(struct counter_device *counter,
-			       struct counter_count *count, unsigned long val)
+			       struct counter_count *count, u64 val)
 {
 	struct ti_eqep_cnt *priv = counter->priv;
 	u32 max;
@@ -117,63 +112,99 @@ static int ti_eqep_count_write(struct counter_device *counter,
 	return regmap_write(priv->regmap32, QPOSCNT, val);
 }
 
-static int ti_eqep_function_get(struct counter_device *counter,
-				struct counter_count *count, size_t *function)
+static int ti_eqep_function_read(struct counter_device *counter,
+				 struct counter_count *count,
+				 enum counter_function *function)
 {
 	struct ti_eqep_cnt *priv = counter->priv;
 	u32 qdecctl;
 
 	regmap_read(priv->regmap16, QDECCTL, &qdecctl);
-	*function = (qdecctl & QDECCTL_QSRC) >> QDECCTL_QSRC_SHIFT;
+
+	switch ((qdecctl & QDECCTL_QSRC) >> QDECCTL_QSRC_SHIFT) {
+	case TI_EQEP_COUNT_FUNC_QUAD_COUNT:
+		*function = COUNTER_FUNCTION_QUADRATURE_X4;
+		break;
+	case TI_EQEP_COUNT_FUNC_DIR_COUNT:
+		*function = COUNTER_FUNCTION_PULSE_DIRECTION;
+		break;
+	case TI_EQEP_COUNT_FUNC_UP_COUNT:
+		*function = COUNTER_FUNCTION_INCREASE;
+		break;
+	case TI_EQEP_COUNT_FUNC_DOWN_COUNT:
+		*function = COUNTER_FUNCTION_DECREASE;
+		break;
+	}
 
 	return 0;
 }
 
-static int ti_eqep_function_set(struct counter_device *counter,
-				struct counter_count *count, size_t function)
+static int ti_eqep_function_write(struct counter_device *counter,
+				  struct counter_count *count,
+				  enum counter_function function)
 {
 	struct ti_eqep_cnt *priv = counter->priv;
+	enum ti_eqep_count_func qsrc;
+
+	switch (function) {
+	case COUNTER_FUNCTION_QUADRATURE_X4:
+		qsrc = TI_EQEP_COUNT_FUNC_QUAD_COUNT;
+		break;
+	case COUNTER_FUNCTION_PULSE_DIRECTION:
+		qsrc = TI_EQEP_COUNT_FUNC_DIR_COUNT;
+		break;
+	case COUNTER_FUNCTION_INCREASE:
+		qsrc = TI_EQEP_COUNT_FUNC_UP_COUNT;
+		break;
+	case COUNTER_FUNCTION_DECREASE:
+		qsrc = TI_EQEP_COUNT_FUNC_DOWN_COUNT;
+		break;
+	default:
+		/* should never reach this path */
+		return -EINVAL;
+	}
 
 	return regmap_write_bits(priv->regmap16, QDECCTL, QDECCTL_QSRC,
-				 function << QDECCTL_QSRC_SHIFT);
+				 qsrc << QDECCTL_QSRC_SHIFT);
 }
 
-static int ti_eqep_action_get(struct counter_device *counter,
-			      struct counter_count *count,
-			      struct counter_synapse *synapse, size_t *action)
+static int ti_eqep_action_read(struct counter_device *counter,
+			       struct counter_count *count,
+			       struct counter_synapse *synapse,
+			       enum counter_synapse_action *action)
 {
 	struct ti_eqep_cnt *priv = counter->priv;
-	size_t function;
+	enum counter_function function;
 	u32 qdecctl;
 	int err;
 
-	err = ti_eqep_function_get(counter, count, &function);
+	err = ti_eqep_function_read(counter, count, &function);
 	if (err)
 		return err;
 
 	switch (function) {
-	case TI_EQEP_COUNT_FUNC_QUAD_COUNT:
+	case COUNTER_FUNCTION_QUADRATURE_X4:
 		/* In quadrature mode, the rising and falling edge of both
 		 * QEPA and QEPB trigger QCLK.
 		 */
-		*action = TI_EQEP_SYNAPSE_ACTION_BOTH_EDGES;
+		*action = COUNTER_SYNAPSE_ACTION_BOTH_EDGES;
 		return 0;
-	case TI_EQEP_COUNT_FUNC_DIR_COUNT:
+	case COUNTER_FUNCTION_PULSE_DIRECTION:
 		/* In direction-count mode only rising edge of QEPA is counted
 		 * and QEPB gives direction.
 		 */
 		if (synapse->signal->id == TI_EQEP_SIGNAL_QEPB)
-			*action = TI_EQEP_SYNAPSE_ACTION_NONE;
+			*action = COUNTER_SYNAPSE_ACTION_NONE;
 		else
-			*action = TI_EQEP_SYNAPSE_ACTION_RISING_EDGE;
+			*action = COUNTER_SYNAPSE_ACTION_RISING_EDGE;
 		return 0;
-	case TI_EQEP_COUNT_FUNC_UP_COUNT:
-	case TI_EQEP_COUNT_FUNC_DOWN_COUNT:
+	case COUNTER_FUNCTION_INCREASE:
+	case COUNTER_FUNCTION_DECREASE:
 		/* In up/down-count modes only QEPA is counted and QEPB is not
 		 * used.
 		 */
 		if (synapse->signal->id == TI_EQEP_SIGNAL_QEPB) {
-			*action = TI_EQEP_SYNAPSE_ACTION_NONE;
+			*action = COUNTER_SYNAPSE_ACTION_NONE;
 			return 0;
 		}
 
@@ -182,9 +213,9 @@ static int ti_eqep_action_get(struct counter_device *counter,
 			return err;
 
 		if (qdecctl & QDECCTL_XCR)
-			*action = TI_EQEP_SYNAPSE_ACTION_BOTH_EDGES;
+			*action = COUNTER_SYNAPSE_ACTION_BOTH_EDGES;
 		else
-			*action = TI_EQEP_SYNAPSE_ACTION_RISING_EDGE;
+			*action = COUNTER_SYNAPSE_ACTION_RISING_EDGE;
 		return 0;
 	default:
 		/* should never reach this path */
@@ -195,82 +226,67 @@ static int ti_eqep_action_get(struct counter_device *counter,
 static const struct counter_ops ti_eqep_counter_ops = {
 	.count_read	= ti_eqep_count_read,
 	.count_write	= ti_eqep_count_write,
-	.function_get	= ti_eqep_function_get,
-	.function_set	= ti_eqep_function_set,
-	.action_get	= ti_eqep_action_get,
+	.function_read	= ti_eqep_function_read,
+	.function_write	= ti_eqep_function_write,
+	.action_read	= ti_eqep_action_read,
 };
 
-static ssize_t ti_eqep_position_ceiling_read(struct counter_device *counter,
-					     struct counter_count *count,
-					     void *ext_priv, char *buf)
+static int ti_eqep_position_ceiling_read(struct counter_device *counter,
+					 struct counter_count *count,
+					 u64 *ceiling)
 {
 	struct ti_eqep_cnt *priv = counter->priv;
 	u32 qposmax;
 
 	regmap_read(priv->regmap32, QPOSMAX, &qposmax);
 
-	return sprintf(buf, "%u\n", qposmax);
+	*ceiling = qposmax;
+
+	return 0;
 }
 
-static ssize_t ti_eqep_position_ceiling_write(struct counter_device *counter,
-					      struct counter_count *count,
-					      void *ext_priv, const char *buf,
-					      size_t len)
+static int ti_eqep_position_ceiling_write(struct counter_device *counter,
+					  struct counter_count *count,
+					  u64 ceiling)
 {
 	struct ti_eqep_cnt *priv = counter->priv;
-	int err;
-	u32 res;
 
-	err = kstrtouint(buf, 0, &res);
-	if (err < 0)
-		return err;
+	if (ceiling != (u32)ceiling)
+		return -ERANGE;
 
-	regmap_write(priv->regmap32, QPOSMAX, res);
+	regmap_write(priv->regmap32, QPOSMAX, ceiling);
 
-	return len;
+	return 0;
 }
 
-static ssize_t ti_eqep_position_enable_read(struct counter_device *counter,
-					    struct counter_count *count,
-					    void *ext_priv, char *buf)
+static int ti_eqep_position_enable_read(struct counter_device *counter,
+					struct counter_count *count, u8 *enable)
 {
 	struct ti_eqep_cnt *priv = counter->priv;
 	u32 qepctl;
 
 	regmap_read(priv->regmap16, QEPCTL, &qepctl);
 
-	return sprintf(buf, "%u\n", !!(qepctl & QEPCTL_PHEN));
+	*enable = !!(qepctl & QEPCTL_PHEN);
+
+	return 0;
 }
 
-static ssize_t ti_eqep_position_enable_write(struct counter_device *counter,
-					     struct counter_count *count,
-					     void *ext_priv, const char *buf,
-					     size_t len)
+static int ti_eqep_position_enable_write(struct counter_device *counter,
+					 struct counter_count *count, u8 enable)
 {
 	struct ti_eqep_cnt *priv = counter->priv;
-	int err;
-	bool res;
-
-	err = kstrtobool(buf, &res);
-	if (err < 0)
-		return err;
 
-	regmap_write_bits(priv->regmap16, QEPCTL, QEPCTL_PHEN, res ? -1 : 0);
+	regmap_write_bits(priv->regmap16, QEPCTL, QEPCTL_PHEN, enable ? -1 : 0);
 
-	return len;
+	return 0;
 }
 
-static struct counter_count_ext ti_eqep_position_ext[] = {
-	{
-		.name	= "ceiling",
-		.read	= ti_eqep_position_ceiling_read,
-		.write	= ti_eqep_position_ceiling_write,
-	},
-	{
-		.name	= "enable",
-		.read	= ti_eqep_position_enable_read,
-		.write	= ti_eqep_position_enable_write,
-	},
+static struct counter_comp ti_eqep_position_ext[] = {
+	COUNTER_COMP_CEILING(ti_eqep_position_ceiling_read,
+			     ti_eqep_position_ceiling_write),
+	COUNTER_COMP_ENABLE(ti_eqep_position_enable_read,
+			    ti_eqep_position_enable_write),
 };
 
 static struct counter_signal ti_eqep_signals[] = {
@@ -285,16 +301,16 @@ static struct counter_signal ti_eqep_signals[] = {
 };
 
 static const enum counter_function ti_eqep_position_functions[] = {
-	[TI_EQEP_COUNT_FUNC_QUAD_COUNT]	= COUNTER_FUNCTION_QUADRATURE_X4,
-	[TI_EQEP_COUNT_FUNC_DIR_COUNT]	= COUNTER_FUNCTION_PULSE_DIRECTION,
-	[TI_EQEP_COUNT_FUNC_UP_COUNT]	= COUNTER_FUNCTION_INCREASE,
-	[TI_EQEP_COUNT_FUNC_DOWN_COUNT]	= COUNTER_FUNCTION_DECREASE,
+	COUNTER_FUNCTION_QUADRATURE_X4,
+	COUNTER_FUNCTION_PULSE_DIRECTION,
+	COUNTER_FUNCTION_INCREASE,
+	COUNTER_FUNCTION_DECREASE,
 };
 
 static const enum counter_synapse_action ti_eqep_position_synapse_actions[] = {
-	[TI_EQEP_SYNAPSE_ACTION_BOTH_EDGES]	= COUNTER_SYNAPSE_ACTION_BOTH_EDGES,
-	[TI_EQEP_SYNAPSE_ACTION_RISING_EDGE]	= COUNTER_SYNAPSE_ACTION_RISING_EDGE,
-	[TI_EQEP_SYNAPSE_ACTION_NONE]		= COUNTER_SYNAPSE_ACTION_NONE,
+	COUNTER_SYNAPSE_ACTION_BOTH_EDGES,
+	COUNTER_SYNAPSE_ACTION_RISING_EDGE,
+	COUNTER_SYNAPSE_ACTION_NONE,
 };
 
 static struct counter_synapse ti_eqep_position_synapses[] = {
include/linux/counter.h +326 -303
index d16ce2819b48..567471818ec3 100644
@@ -6,42 +6,184 @@
 #ifndef _COUNTER_H_
 #define _COUNTER_H_
 
-#include <linux/counter_enum.h>
 #include <linux/device.h>
+#include <linux/kernel.h>
 #include <linux/types.h>
 
+struct counter_device;
+struct counter_count;
+struct counter_synapse;
+struct counter_signal;
+
+enum counter_comp_type {
+	COUNTER_COMP_U8,
+	COUNTER_COMP_U64,
+	COUNTER_COMP_BOOL,
+	COUNTER_COMP_SIGNAL_LEVEL,
+	COUNTER_COMP_FUNCTION,
+	COUNTER_COMP_SYNAPSE_ACTION,
+	COUNTER_COMP_ENUM,
+	COUNTER_COMP_COUNT_DIRECTION,
+	COUNTER_COMP_COUNT_MODE,
+};
+
+enum counter_scope {
+	COUNTER_SCOPE_DEVICE,
+	COUNTER_SCOPE_SIGNAL,
+	COUNTER_SCOPE_COUNT,
+};
+
 enum counter_count_direction {
-	COUNTER_COUNT_DIRECTION_FORWARD = 0,
-	COUNTER_COUNT_DIRECTION_BACKWARD
+	COUNTER_COUNT_DIRECTION_FORWARD,
+	COUNTER_COUNT_DIRECTION_BACKWARD,
 };
-extern const char *const counter_count_direction_str[2];
 
 enum counter_count_mode {
-	COUNTER_COUNT_MODE_NORMAL = 0,
+	COUNTER_COUNT_MODE_NORMAL,
 	COUNTER_COUNT_MODE_RANGE_LIMIT,
 	COUNTER_COUNT_MODE_NON_RECYCLE,
-	COUNTER_COUNT_MODE_MODULO_N
+	COUNTER_COUNT_MODE_MODULO_N,
 };
-extern const char *const counter_count_mode_str[4];
 
-struct counter_device;
-struct counter_signal;
+enum counter_function {
+	COUNTER_FUNCTION_INCREASE,
+	COUNTER_FUNCTION_DECREASE,
+	COUNTER_FUNCTION_PULSE_DIRECTION,
+	COUNTER_FUNCTION_QUADRATURE_X1_A,
+	COUNTER_FUNCTION_QUADRATURE_X1_B,
+	COUNTER_FUNCTION_QUADRATURE_X2_A,
+	COUNTER_FUNCTION_QUADRATURE_X2_B,
+	COUNTER_FUNCTION_QUADRATURE_X4,
+};
+
+enum counter_signal_level {
+	COUNTER_SIGNAL_LEVEL_LOW,
+	COUNTER_SIGNAL_LEVEL_HIGH,
+};
+
+enum counter_synapse_action {
+	COUNTER_SYNAPSE_ACTION_NONE,
+	COUNTER_SYNAPSE_ACTION_RISING_EDGE,
+	COUNTER_SYNAPSE_ACTION_FALLING_EDGE,
+	COUNTER_SYNAPSE_ACTION_BOTH_EDGES,
+};
 
 /**
- * struct counter_signal_ext - Counter Signal extensions
- * @name:	attribute name
- * @read:	read callback for this attribute; may be NULL
- * @write:	write callback for this attribute; may be NULL
- * @priv:	data private to the driver
+ * struct counter_comp - Counter component node
+ * @type:		Counter component data type
+ * @name:		device-specific component name
+ * @priv:		component-relevant data
+ * @action_read		Synapse action mode read callback. The read value of the
+ *			respective Synapse action mode should be passed back via
+ *			the action parameter.
+ * @device_u8_read	Device u8 component read callback. The read value of the
+ *			respective Device u8 component should be passed back via
+ *			the val parameter.
+ * @count_u8_read	Count u8 component read callback. The read value of the
+ *			respective Count u8 component should be passed back via
+ *			the val parameter.
+ * @signal_u8_read	Signal u8 component read callback. The read value of the
+ *			respective Signal u8 component should be passed back via
+ *			the val parameter.
+ * @device_u32_read	Device u32 component read callback. The read value of
+ *			the respective Device u32 component should be passed
+ *			back via the val parameter.
+ * @count_u32_read	Count u32 component read callback. The read value of the
+ *			respective Count u32 component should be passed back via
+ *			the val parameter.
+ * @signal_u32_read	Signal u32 component read callback. The read value of
+ *			the respective Signal u32 component should be passed
+ *			back via the val parameter.
+ * @device_u64_read	Device u64 component read callback. The read value of
+ *			the respective Device u64 component should be passed
+ *			back via the val parameter.
+ * @count_u64_read	Count u64 component read callback. The read value of the
+ *			respective Count u64 component should be passed back via
+ *			the val parameter.
+ * @signal_u64_read	Signal u64 component read callback. The read value of
+ *			the respective Signal u64 component should be passed
+ *			back via the val parameter.
+ * @action_write	Synapse action mode write callback. The write value of
+ *			the respective Synapse action mode is passed via the
+ *			action parameter.
+ * @device_u8_write	Device u8 component write callback. The write value of
+ *			the respective Device u8 component is passed via the val
+ *			parameter.
+ * @count_u8_write	Count u8 component write callback. The write value of
+ *			the respective Count u8 component is passed via the val
+ *			parameter.
+ * @signal_u8_write	Signal u8 component write callback. The write value of
+ *			the respective Signal u8 component is passed via the val
+ *			parameter.
+ * @device_u32_write	Device u32 component write callback. The write value of
+ *			the respective Device u32 component is passed via the
+ *			val parameter.
+ * @count_u32_write	Count u32 component write callback. The write value of
+ *			the respective Count u32 component is passed via the val
+ *			parameter.
+ * @signal_u32_write	Signal u32 component write callback. The write value of
+ *			the respective Signal u32 component is passed via the
+ *			val parameter.
+ * @device_u64_write	Device u64 component write callback. The write value of
+ *			the respective Device u64 component is passed via the
+ *			val parameter.
+ * @count_u64_write	Count u64 component write callback. The write value of
+ *			the respective Count u64 component is passed via the val
+ *			parameter.
+ * @signal_u64_write	Signal u64 component write callback. The write value of
+ *			the respective Signal u64 component is passed via the
+ *			val parameter.
  */
-struct counter_signal_ext {
+struct counter_comp {
+	enum counter_comp_type type;
 	const char *name;
-	ssize_t (*read)(struct counter_device *counter,
-			struct counter_signal *signal, void *priv, char *buf);
-	ssize_t (*write)(struct counter_device *counter,
-			 struct counter_signal *signal, void *priv,
-			 const char *buf, size_t len);
 	void *priv;
+	union {
+		int (*action_read)(struct counter_device *counter,
+				   struct counter_count *count,
+				   struct counter_synapse *synapse,
+				   enum counter_synapse_action *action);
+		int (*device_u8_read)(struct counter_device *counter, u8 *val);
+		int (*count_u8_read)(struct counter_device *counter,
+				     struct counter_count *count, u8 *val);
+		int (*signal_u8_read)(struct counter_device *counter,
+				      struct counter_signal *signal, u8 *val);
+		int (*device_u32_read)(struct counter_device *counter,
+				       u32 *val);
+		int (*count_u32_read)(struct counter_device *counter,
+				      struct counter_count *count, u32 *val);
+		int (*signal_u32_read)(struct counter_device *counter,
+				       struct counter_signal *signal, u32 *val);
+		int (*device_u64_read)(struct counter_device *counter,
+				       u64 *val);
+		int (*count_u64_read)(struct counter_device *counter,
+				      struct counter_count *count, u64 *val);
+		int (*signal_u64_read)(struct counter_device *counter,
+				       struct counter_signal *signal, u64 *val);
+	};
+	union {
+		int (*action_write)(struct counter_device *counter,
+				    struct counter_count *count,
+				    struct counter_synapse *synapse,
+				    enum counter_synapse_action action);
+		int (*device_u8_write)(struct counter_device *counter, u8 val);
+		int (*count_u8_write)(struct counter_device *counter,
+				      struct counter_count *count, u8 val);
+		int (*signal_u8_write)(struct counter_device *counter,
+				       struct counter_signal *signal, u8 val);
+		int (*device_u32_write)(struct counter_device *counter,
+					u32 val);
+		int (*count_u32_write)(struct counter_device *counter,
+				       struct counter_count *count, u32 val);
+		int (*signal_u32_write)(struct counter_device *counter,
+					struct counter_signal *signal, u32 val);
+		int (*device_u64_write)(struct counter_device *counter,
+					u64 val);
+		int (*count_u64_write)(struct counter_device *counter,
+				       struct counter_count *count, u64 val);
+		int (*signal_u64_write)(struct counter_device *counter,
+					struct counter_signal *signal, u64 val);
+	};
 };
 
 /**
@@ -57,122 +199,23 @@ struct counter_signal {
 	int id;
 	const char *name;
 
-	const struct counter_signal_ext *ext;
+	struct counter_comp *ext;
 	size_t num_ext;
-
-	void *priv;
-};
-
-/**
- * struct counter_signal_enum_ext - Signal enum extension attribute
- * @items:	Array of strings
- * @num_items:	Number of items specified in @items
- * @set:	Set callback function; may be NULL
- * @get:	Get callback function; may be NULL
- *
- * The counter_signal_enum_ext structure can be used to implement enum style
- * Signal extension attributes. Enum style attributes are those which have a set
- * of strings that map to unsigned integer values. The Generic Counter Signal
- * enum extension helper code takes care of mapping between value and string, as
- * well as generating a "_available" file which contains a list of all available
- * items. The get callback is used to query the currently active item; the index
- * of the item within the respective items array is returned via the 'item'
- * parameter. The set callback is called when the attribute is updated; the
- * 'item' parameter contains the index of the newly activated item within the
- * respective items array.
- */
-struct counter_signal_enum_ext {
-	const char * const *items;
-	size_t num_items;
-	int (*get)(struct counter_device *counter,
-		   struct counter_signal *signal, size_t *item);
-	int (*set)(struct counter_device *counter,
-		   struct counter_signal *signal, size_t item);
-};
-
-/**
- * COUNTER_SIGNAL_ENUM() - Initialize Signal enum extension
- * @_name:	Attribute name
- * @_e:		Pointer to a counter_signal_enum_ext structure
- *
- * This should usually be used together with COUNTER_SIGNAL_ENUM_AVAILABLE()
- */
-#define COUNTER_SIGNAL_ENUM(_name, _e) \
-{ \
-	.name = (_name), \
-	.read = counter_signal_enum_read, \
-	.write = counter_signal_enum_write, \
-	.priv = (_e) \
-}
-
-/**
- * COUNTER_SIGNAL_ENUM_AVAILABLE() - Initialize Signal enum available extension
- * @_name:	Attribute name ("_available" will be appended to the name)
- * @_e:		Pointer to a counter_signal_enum_ext structure
- *
- * Creates a read only attribute that lists all the available enum items in a
- * newline separated list. This should usually be used together with
- * COUNTER_SIGNAL_ENUM()
- */
-#define COUNTER_SIGNAL_ENUM_AVAILABLE(_name, _e) \
-{ \
-	.name = (_name "_available"), \
-	.read = counter_signal_enum_available_read, \
-	.priv = (_e) \
-}
-
-enum counter_synapse_action {
-	COUNTER_SYNAPSE_ACTION_NONE = 0,
-	COUNTER_SYNAPSE_ACTION_RISING_EDGE,
-	COUNTER_SYNAPSE_ACTION_FALLING_EDGE,
-	COUNTER_SYNAPSE_ACTION_BOTH_EDGES
 };
 
 /**
  * struct counter_synapse - Counter Synapse node
- * @action:		index of current action mode
  * @actions_list:	array of available action modes
  * @num_actions:	number of action modes specified in @actions_list
  * @signal:		pointer to associated signal
  */
 struct counter_synapse {
-	size_t action;
 	const enum counter_synapse_action *actions_list;
 	size_t num_actions;
 
 	struct counter_signal *signal;
 };
 
-struct counter_count;
-
-/**
- * struct counter_count_ext - Counter Count extension
- * @name:	attribute name
- * @read:	read callback for this attribute; may be NULL
- * @write:	write callback for this attribute; may be NULL
- * @priv:	data private to the driver
- */
-struct counter_count_ext {
-	const char *name;
-	ssize_t (*read)(struct counter_device *counter,
-			struct counter_count *count, void *priv, char *buf);
-	ssize_t (*write)(struct counter_device *counter,
-			 struct counter_count *count, void *priv,
-			 const char *buf, size_t len);
-	void *priv;
-};
-
-enum counter_function {
-	COUNTER_FUNCTION_INCREASE = 0,
-	COUNTER_FUNCTION_DECREASE,
-	COUNTER_FUNCTION_PULSE_DIRECTION,
-	COUNTER_FUNCTION_QUADRATURE_X1_A,
-	COUNTER_FUNCTION_QUADRATURE_X1_B,
-	COUNTER_FUNCTION_QUADRATURE_X2_A,
-	COUNTER_FUNCTION_QUADRATURE_X2_B,
-	COUNTER_FUNCTION_QUADRATURE_X4
-};
-
 /**
  * struct counter_count - Counter Count node
  * @id:			unique ID used to identify Count
@@ -191,108 +234,14 @@ struct counter_count {
 	int id;
 	const char *name;
 
-	size_t function;
 	const enum counter_function *functions_list;
 	size_t num_functions;
 
 	struct counter_synapse *synapses;
 	size_t num_synapses;
 
-	const struct counter_count_ext *ext;
+	struct counter_comp *ext;
 	size_t num_ext;
-
-	void *priv;
-};
-
-/**
- * struct counter_count_enum_ext - Count enum extension attribute
- * @items:	Array of strings
- * @num_items:	Number of items specified in @items
- * @set:	Set callback function; may be NULL
- * @get:	Get callback function; may be NULL
- *
- * The counter_count_enum_ext structure can be used to implement enum style
- * Count extension attributes. Enum style attributes are those which have a set
- * of strings that map to unsigned integer values. The Generic Counter Count
- * enum extension helper code takes care of mapping between value and string, as
- * well as generating a "_available" file which contains a list of all available
- * items. The get callback is used to query the currently active item; the index
- * of the item within the respective items array is returned via the 'item'
- * parameter. The set callback is called when the attribute is updated; the
- * 'item' parameter contains the index of the newly activated item within the
- * respective items array.
- */
-struct counter_count_enum_ext {
-	const char * const *items;
-	size_t num_items;
-	int (*get)(struct counter_device *counter, struct counter_count *count,
-		   size_t *item);
-	int (*set)(struct counter_device *counter, struct counter_count *count,
-		   size_t item);
-};
-
-/**
- * COUNTER_COUNT_ENUM() - Initialize Count enum extension
- * @_name:	Attribute name
- * @_e:		Pointer to a counter_count_enum_ext structure
- *
- * This should usually be used together with COUNTER_COUNT_ENUM_AVAILABLE()
- */
-#define COUNTER_COUNT_ENUM(_name, _e) \
-{ \
-	.name = (_name), \
-	.read = counter_count_enum_read, \
-	.write = counter_count_enum_write, \
-	.priv = (_e) \
-}
-
-/**
- * COUNTER_COUNT_ENUM_AVAILABLE() - Initialize Count enum available extension
- * @_name:	Attribute name ("_available" will be appended to the name)
- * @_e:		Pointer to a counter_count_enum_ext structure
- *
- * Creates a read only attribute that lists all the available enum items in a
- * newline separated list. This should usually be used together with
- * COUNTER_COUNT_ENUM()
- */
-#define COUNTER_COUNT_ENUM_AVAILABLE(_name, _e) \
-{ \
-	.name = (_name "_available"), \
-	.read = counter_count_enum_available_read, \
-	.priv = (_e) \
-}
-
-/**
- * struct counter_device_attr_group - internal container for attribute group
- * @attr_group:	Counter sysfs attributes group
- * @attr_list:	list to keep track of created Counter sysfs attributes
- * @num_attr:	number of Counter sysfs attributes
- */
-struct counter_device_attr_group {
-	struct attribute_group attr_group;
-	struct list_head attr_list;
-	size_t num_attr;
-};
-
-/**
- * struct counter_device_state - internal state container for a Counter device
- * @id:			unique ID used to identify the Counter
- * @dev:		internal device structure
- * @groups_list:	attribute groups list (for Signals, Counts, and ext)
- * @num_groups:		number of attribute groups containers
- * @groups:		Counter sysfs attribute groups (to populate @dev.groups)
- */
-struct counter_device_state {
-	int id;
-	struct device dev;
-	struct counter_device_attr_group *groups_list;
-	size_t num_groups;
-	const struct attribute_group **groups;
-};
-
-enum counter_signal_level {
-	COUNTER_SIGNAL_LEVEL_LOW,
-	COUNTER_SIGNAL_LEVEL_HIGH,
 };
 
 /**
@@ -326,97 +275,29 @@ struct counter_ops {
 			   struct counter_signal *signal,
 			   enum counter_signal_level *level);
 	int (*count_read)(struct counter_device *counter,
-			  struct counter_count *count, unsigned long *val);
+			  struct counter_count *count, u64 *value);
 	int (*count_write)(struct counter_device *counter,
-			   struct counter_count *count, unsigned long val);
-	int (*function_get)(struct counter_device *counter,
-			    struct counter_count *count, size_t *function);
-	int (*function_set)(struct counter_device *counter,
-			    struct counter_count *count, size_t function);
-	int (*action_get)(struct counter_device *counter,
-			  struct counter_count *count,
-			  struct counter_synapse *synapse, size_t *action);
-	int (*action_set)(struct counter_device *counter,
-			  struct counter_count *count,
-			  struct counter_synapse *synapse, size_t action);
-};
-
-/**
- * struct counter_device_ext - Counter device extension
- * @name:	attribute name
- * @read:	read callback for this attribute; may be NULL
- * @write:	write callback for this attribute; may be NULL
- * @priv:	data private to the driver
- */
-struct counter_device_ext {
-	const char *name;
-	ssize_t (*read)(struct counter_device *counter, void *priv, char *buf);
-	ssize_t (*write)(struct counter_device *counter, void *priv,
-			 const char *buf, size_t len);
-	void *priv;
-};
-
-/**
- * struct counter_device_enum_ext - Counter enum extension attribute
- * @items:	Array of strings
- * @num_items:	Number of items specified in @items
- * @set:	Set callback function; may be NULL
- * @get:	Get callback function; may be NULL
- *
- * The counter_device_enum_ext structure can be used to implement enum style
- * Counter extension attributes. Enum style attributes are those which have a
- * set of strings that map to unsigned integer values. The Generic Counter enum
- * extension helper code takes care of mapping between value and string, as well
- * as generating a "_available" file which contains a list of all available
- * items. The get callback is used to query the currently active item; the index
- * of the item within the respective items array is returned via the 'item'
- * parameter. The set callback is called when the attribute is updated; the
- * 'item' parameter contains the index of the newly activated item within the
- * respective items array.
- */
-struct counter_device_enum_ext {
-	const char * const *items;
-	size_t num_items;
-	int (*get)(struct counter_device *counter, size_t *item);
-	int (*set)(struct counter_device *counter, size_t item);
+			   struct counter_count *count, u64 value);
+	int (*function_read)(struct counter_device *counter,
+			     struct counter_count *count,
+			     enum counter_function *function);
+	int (*function_write)(struct counter_device *counter,
+			      struct counter_count *count,
+			      enum counter_function function);
+	int (*action_read)(struct counter_device *counter,
+			   struct counter_count *count,
+			   struct counter_synapse *synapse,
+			   enum counter_synapse_action *action);
+	int (*action_write)(struct counter_device *counter,
+			    struct counter_count *count,
+			    struct counter_synapse *synapse,
+			    enum counter_synapse_action action);
 };
 
-/**
- * COUNTER_DEVICE_ENUM() - Initialize Counter enum extension
- * @_name:	Attribute name
- * @_e:		Pointer to a counter_device_enum_ext structure
- *
- * This should usually be used together with COUNTER_DEVICE_ENUM_AVAILABLE()
- */
-#define COUNTER_DEVICE_ENUM(_name, _e) \
-{ \
-	.name = (_name), \
-	.read = counter_device_enum_read, \
-	.write = counter_device_enum_write, \
-	.priv = (_e) \
-}
-
-/**
- * COUNTER_DEVICE_ENUM_AVAILABLE() - Initialize Counter enum available extension
- * @_name:	Attribute name ("_available" will be appended to the name)
- * @_e:		Pointer to a counter_device_enum_ext structure
- *
- * Creates a read only attribute that lists all the available enum items in a
- * newline separated list. This should usually be used together with
- * COUNTER_DEVICE_ENUM()
- */
-#define COUNTER_DEVICE_ENUM_AVAILABLE(_name, _e) \
-{ \
-	.name = (_name "_available"), \
-	.read = counter_device_enum_available_read, \
-	.priv = (_e) \
-}
-
 /**
  * struct counter_device - Counter data structure
  * @name:		name of the device as it appears in the datasheet
  * @parent:		optional parent device providing the counters
- * @device_state:	internal device state container
  * @ops:		callbacks from driver
  * @signals:		array of Signals
  * @num_signals:	number of Signals specified in @signals
@@ -425,11 +306,11 @@ struct counter_device_enum_ext {
  * @ext:		optional array of Counter device extensions
  * @num_ext:		number of Counter device extensions specified in @ext
  * @priv:		optional private data supplied by driver
+ * @dev:		internal device structure
  */
 struct counter_device {
 	const char *name;
 	struct device *parent;
-	struct counter_device_state *device_state;
 
 	const struct counter_ops *ops;
 
@@ -438,17 +319,159 @@ struct counter_device {
 	struct counter_count *counts;
 	size_t num_counts;
 
-	const struct counter_device_ext *ext;
+	struct counter_comp *ext;
 	size_t num_ext;
 
 	void *priv;
+
+	struct device dev;
 };
 
 int counter_register(struct counter_device *const counter);
 void counter_unregister(struct counter_device *const counter);
 int devm_counter_register(struct device *dev,
 			  struct counter_device *const counter);
-void devm_counter_unregister(struct device *dev,
-			     struct counter_device *const counter);
+
+#define COUNTER_COMP_DEVICE_U8(_name, _read, _write) \
+{ \
+	.type = COUNTER_COMP_U8, \
+	.name = (_name), \
+	.device_u8_read = (_read), \
+	.device_u8_write = (_write), \
+}
+#define COUNTER_COMP_COUNT_U8(_name, _read, _write) \
+{ \
+	.type = COUNTER_COMP_U8, \
+	.name = (_name), \
+	.count_u8_read = (_read), \
+	.count_u8_write = (_write), \
+}
+#define COUNTER_COMP_SIGNAL_U8(_name, _read, _write) \
+{ \
+	.type = COUNTER_COMP_U8, \
+	.name = (_name), \
+	.signal_u8_read = (_read), \
+	.signal_u8_write = (_write), \
+}
+
+#define COUNTER_COMP_DEVICE_U64(_name, _read, _write) \
+{ \
+	.type = COUNTER_COMP_U64, \
+	.name = (_name), \
+	.device_u64_read = (_read), \
+	.device_u64_write = (_write), \
+}
+#define COUNTER_COMP_COUNT_U64(_name, _read, _write) \
+{ \
+	.type = COUNTER_COMP_U64, \
+	.name = (_name), \
+	.count_u64_read = (_read), \
+	.count_u64_write = (_write), \
+}
+#define COUNTER_COMP_SIGNAL_U64(_name, _read, _write) \
+{ \
+	.type = COUNTER_COMP_U64, \
+	.name = (_name), \
+	.signal_u64_read = (_read), \
+	.signal_u64_write = (_write), \
+}
+
+#define COUNTER_COMP_DEVICE_BOOL(_name, _read, _write) \
+{ \
+	.type = COUNTER_COMP_BOOL, \
+	.name = (_name), \
+	.device_u8_read = (_read), \
+	.device_u8_write = (_write), \
+}
+#define COUNTER_COMP_COUNT_BOOL(_name, _read, _write) \
+{ \
+	.type = COUNTER_COMP_BOOL, \
+	.name = (_name), \
+	.count_u8_read = (_read), \
+	.count_u8_write = (_write), \
+}
+#define COUNTER_COMP_SIGNAL_BOOL(_name, _read, _write) \
+{ \
+	.type = COUNTER_COMP_BOOL, \
+	.name = (_name), \
+	.signal_u8_read = (_read), \
+	.signal_u8_write = (_write), \
+}
+
+struct counter_available {
+	union {
+		const u32 *enums;
+		const char *const *strs;
+	};
+	size_t num_items;
+};
+
+#define DEFINE_COUNTER_AVAILABLE(_name, _enums) \
+	struct counter_available _name = { \
+		.enums = (_enums), \
+		.num_items = ARRAY_SIZE(_enums), \
+	}
+
+#define DEFINE_COUNTER_ENUM(_name, _strs) \
+	struct counter_available _name = { \
+		.strs = (_strs), \
+		.num_items = ARRAY_SIZE(_strs), \
+	}
+
+#define COUNTER_COMP_DEVICE_ENUM(_name, _get, _set, _available) \
+{ \
+	.type = COUNTER_COMP_ENUM, \
+	.name = (_name), \
+	.device_u32_read = (_get), \
+	.device_u32_write = (_set), \
+	.priv = &(_available), \
+}
+#define COUNTER_COMP_COUNT_ENUM(_name, _get, _set, _available) \
+{ \
+	.type = COUNTER_COMP_ENUM, \
+	.name = (_name), \
+	.count_u32_read = (_get), \
+	.count_u32_write = (_set), \
+	.priv = &(_available), \
+}
+#define COUNTER_COMP_SIGNAL_ENUM(_name, _get, _set, _available) \
+{ \
+	.type = COUNTER_COMP_ENUM, \
+	.name = (_name), \
+	.signal_u32_read = (_get), \
+	.signal_u32_write = (_set), \
+	.priv = &(_available), \
+}
+
+#define COUNTER_COMP_CEILING(_read, _write) \
+	COUNTER_COMP_COUNT_U64("ceiling", _read, _write)
+
+#define COUNTER_COMP_COUNT_MODE(_read, _write, _available) \
+{ \
+	.type = COUNTER_COMP_COUNT_MODE, \
+	.name = "count_mode", \
+	.count_u32_read = (_read), \
+	.count_u32_write = (_write), \
+	.priv = &(_available), \
+}
+
+#define COUNTER_COMP_DIRECTION(_read) \
+{ \
+	.type = COUNTER_COMP_COUNT_DIRECTION, \
+	.name = "direction", \
+	.count_u32_read = (_read), \
+}
+
+#define COUNTER_COMP_ENABLE(_read, _write) \
+	COUNTER_COMP_COUNT_BOOL("enable", _read, _write)
+
+#define COUNTER_COMP_FLOOR(_read, _write) \
+	COUNTER_COMP_COUNT_U64("floor", _read, _write)
+
+#define COUNTER_COMP_PRESET(_read, _write) \
+	COUNTER_COMP_COUNT_U64("preset", _read, _write)
+
+#define COUNTER_COMP_PRESET_ENABLE(_read, _write) \
+	COUNTER_COMP_COUNT_BOOL("preset_enable", _read, _write)
 
 #endif /* _COUNTER_H_ */
include/linux/counter_enum.h deleted +0 -45
deleted file mode 100644
index 9f917298a88f..000000000000
@@ -1,45 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Counter interface enum functions
- * Copyright (C) 2018 William Breathitt Gray
- */
-#ifndef _COUNTER_ENUM_H_
-#define _COUNTER_ENUM_H_
-
-#include <linux/types.h>
-
-struct counter_device;
-struct counter_signal;
-struct counter_count;
-
-ssize_t counter_signal_enum_read(struct counter_device *counter,
-				 struct counter_signal *signal, void *priv,
-				 char *buf);
-ssize_t counter_signal_enum_write(struct counter_device *counter,
-				  struct counter_signal *signal, void *priv,
-				  const char *buf, size_t len);
-
-ssize_t counter_signal_enum_available_read(struct counter_device *counter,
-					   struct counter_signal *signal,
-					   void *priv, char *buf);
-
-ssize_t counter_count_enum_read(struct counter_device *counter,
-				struct counter_count *count, void *priv,
-				char *buf);
-ssize_t counter_count_enum_write(struct counter_device *counter,
-				 struct counter_count *count, void *priv,
-				 const char *buf, size_t len);
-
-ssize_t counter_count_enum_available_read(struct counter_device *counter,
-					  struct counter_count *count,
-					  void *priv, char *buf);
-
-ssize_t counter_device_enum_read(struct counter_device *counter, void *priv,
-				 char *buf);
-ssize_t counter_device_enum_write(struct counter_device *counter, void *priv,
-				  const char *buf, size_t len);
-
-ssize_t counter_device_enum_available_read(struct counter_device *counter,
-					   void *priv, char *buf);
-
-#endif /* _COUNTER_ENUM_H_ */
#41 lore raw

Re: [Linux-stm32] [PATCH v10 22/33] counter: Internalize sysfs interface code

Quoted 25 lines · Fabrice Gasnier
Quoted 14 lines · William Breathitt Gray

static const struct atmel_tcb_config tcb_rm9200_config = {

drivers/counter/stm32-lptimer-cnt.c +1 -0
index 13656957c45f..aef78a4217b5 100644
@@ -17,6 +17,7 @@
 #include <linux/module.h>
 #include <linux/pinctrl/consumer.h>
 #include <linux/platform_device.h>
+#include <linux/types.h>
 
 struct stm32_lptim_cnt {
 	struct counter_device counter;

drivers/counter/stm32-lptimer-cnt.c static int stm32_lptim_setup(struct stm32_lptim_cnt *priv, int enable) · line 135

Quoted 7 lines
drivers/counter/stm32-lptimer-cnt.c +2 -2
@@ -130,32 +131,46 @@ static int stm32_lptim_setup(struct stm32_lptim_cnt *priv, int enable)
  * +---------+----------+----------+---------+----------+---------+
  */
 enum stm32_lptim_cnt_function {
-	STM32_LPTIM_COUNTER_INCREASE,
-	STM32_LPTIM_ENCODER_BOTH_EDGE,
+	STM32_LPTIM_COUNTER_INCREASE = COUNTER_FUNCTION_INCREASE,
+	STM32_LPTIM_ENCODER_BOTH_EDGE = COUNTER_FUNCTION_QUADRATURE_X4,

Hi William,

Quoted 2 lines

I'm wondering if this enum is still necessary. I noticed the enum is removed from the 104-quad-8 driver.

Hi Fabrice,

This enum is no longer necessary. I wanted to leave it up to the maintainers to decide whether to remove any particular enum (or to do any other sort of code cleanup), so that is why I didn't remove it here.

Quoted 15 lines

drivers/counter/stm32-lptimer-cnt.c static int stm32_lptim_setup(struct stm32_lptim_cnt *priv, int enable) · line 144

Quoted 11 lines
drivers/counter/stm32-lptimer-cnt.c +3 -2
 };
 
 static const enum counter_function stm32_lptim_cnt_functions[] = {
-	[STM32_LPTIM_COUNTER_INCREASE] = COUNTER_FUNCTION_INCREASE,
-	[STM32_LPTIM_ENCODER_BOTH_EDGE] = COUNTER_FUNCTION_QUADRATURE_X4,
+	STM32_LPTIM_COUNTER_INCREASE,
+	STM32_LPTIM_ENCODER_BOTH_EDGE,
 };
 
 enum stm32_lptim_synapse_action {
+	/* Index must match with stm32_lptim_cnt_polarity[] (priv->polarity) */

Arf... I forgot to update this comment in earlier commit:
d8ac6b4 counter: stm32-lptimer-cnt: remove iio counter abi

Quoted 5 lines

"stm32_lptim_cnt_polarity" doesn't exist anymore. So, this comment can be updated. This should match the priv->polarity, as it's used to write the "CKPOL" bits (e.g. 0x0 for rising, 0x1 falling, 0x2 both).

Or do you wish I send a separate patch ?

This is just a simple comment fix so I think it's best to send it as its own patch to the mailing list.

Quoted 33 lines
Quoted 19 lines
drivers/counter/stm32-lptimer-cnt.c +8 -2
 	STM32_LPTIM_SYNAPSE_ACTION_RISING_EDGE,
 	STM32_LPTIM_SYNAPSE_ACTION_FALLING_EDGE,
 	STM32_LPTIM_SYNAPSE_ACTION_BOTH_EDGES,
 	STM32_LPTIM_SYNAPSE_ACTION_NONE,
 };
 
-static const enum counter_synapse_action stm32_lptim_cnt_synapse_actions[] = {
-	/* Index must match with stm32_lptim_cnt_polarity[] (priv->polarity) */
+static const enum stm32_lptim_synapse_action stm32_lptim_c2l_actions_map[] = {
+	[COUNTER_SYNAPSE_ACTION_RISING_EDGE] = STM32_LPTIM_SYNAPSE_ACTION_RISING_EDGE,
+	[COUNTER_SYNAPSE_ACTION_FALLING_EDGE] = STM32_LPTIM_SYNAPSE_ACTION_FALLING_EDGE,
+	[COUNTER_SYNAPSE_ACTION_BOTH_EDGES] = STM32_LPTIM_SYNAPSE_ACTION_BOTH_EDGES,
+	[COUNTER_SYNAPSE_ACTION_NONE] = STM32_LPTIM_SYNAPSE_ACTION_NONE,
+};
+
+static const enum counter_synapse_action stm32_lptim_l2c_actions_map[] = {
 	[STM32_LPTIM_SYNAPSE_ACTION_RISING_EDGE] = COUNTER_SYNAPSE_ACTION_RISING_EDGE,
 	[STM32_LPTIM_SYNAPSE_ACTION_FALLING_EDGE] = COUNTER_SYNAPSE_ACTION_FALLING_EDGE,
 	[STM32_LPTIM_SYNAPSE_ACTION_BOTH_EDGES] = COUNTER_SYNAPSE_ACTION_BOTH_EDGES,

drivers/counter/stm32-lptimer-cnt.c static int stm32_lptim_setup(struct stm32_lptim_cnt *priv, int enable) · line 171

Quoted 10 lines
drivers/counter/stm32-lptimer-cnt.c +7 -0
 	[STM32_LPTIM_SYNAPSE_ACTION_NONE] = COUNTER_SYNAPSE_ACTION_NONE,
 };
 
+static const enum counter_synapse_action stm32_lptim_cnt_synapse_actions[] = {
+	COUNTER_SYNAPSE_ACTION_RISING_EDGE,
+	COUNTER_SYNAPSE_ACTION_FALLING_EDGE,
+	COUNTER_SYNAPSE_ACTION_BOTH_EDGES,
+	COUNTER_SYNAPSE_ACTION_NONE,
+};
+

I'm getting confused with the two table entries, and the two enums that are very similar. Could it be simplified ?

Quoted 4 lines

I'm thinking of something more straight-forward... in fact only one array should be enough, to convert from synapse action to CKPOL value before it's written to register in stm32_lptim_setup() routine. This should be easier now that the iio part has been removed.

Yes, this might just be a hold over from when we had to handle the legacy IIO Counter code. But now that it is gone, this could probably be simplified down to a single array then. If you have any idea of how to achieve that, please do.

Quoted 26 lines
Quoted 26 lines
drivers/counter/stm32-lptimer-cnt.c +6 -6
@@ -333,43 +333,39 @@ static int stm32_lptim_cnt_action_get(struct counter_device *counter,
 	}
 }
 
-static int stm32_lptim_cnt_action_set(struct counter_device *counter,
-				      struct counter_count *count,
-				      struct counter_synapse *synapse,
-				      size_t action)
+static int stm32_lptim_cnt_action_write(struct counter_device *counter,
+					struct counter_count *count,
+					struct counter_synapse *synapse,
+					enum counter_synapse_action action)
 {
 	struct stm32_lptim_cnt *const priv = counter->priv;
-	size_t function;
+	enum counter_function function;
 	int err;
 
 	if (stm32_lptim_is_enabled(priv))
 		return -EBUSY;
 
-	err = stm32_lptim_cnt_function_get(counter, count, &function);
+	err = stm32_lptim_cnt_function_read(counter, count, &function);
 	if (err)
 		return err;
 
Quoted 14 lines

drivers/counter/stm32-lptimer-cnt.c static int stm32_lptim_cnt_action_get(struct counter_device *counter, · line 353

Quoted 12 lines
drivers/counter/stm32-lptimer-cnt.c +1 -10
 	/* only set polarity when in counter mode (on input 1) */
-	if (function == STM32_LPTIM_COUNTER_INCREASE
-	    && synapse->signal->id == count->synapses[0].signal->id) {
-		switch (action) {
-		case STM32_LPTIM_SYNAPSE_ACTION_RISING_EDGE:
-		case STM32_LPTIM_SYNAPSE_ACTION_FALLING_EDGE:
-		case STM32_LPTIM_SYNAPSE_ACTION_BOTH_EDGES:
-			priv->polarity = action;
-			return 0;
-		}
-	}
+	if ((enum stm32_lptim_cnt_function)function != STM32_LPTIM_COUNTER_INCREASE

Could COUNTER_FUNCTION_INCREASE be used directly here, to avoid casting ?

Sure, you can remove the stm32_lptim_cnt_function enum from this driver and just use COUNTER_FUNCTION_INCREASE here.

Quoted 49 lines
Quoted 36 lines
drivers/counter/stm32-lptimer-cnt.c +10 -5
+	    || synapse->signal->id != count->synapses[0].signal->id
+	    || action == COUNTER_SYNAPSE_ACTION_NONE)
+		return -EINVAL;
 
-	return -EINVAL;
+	priv->polarity = stm32_lptim_c2l_actions_map[action];
+
+	return 0;
 }
 
 static const struct counter_ops stm32_lptim_cnt_ops = {
 	.count_read = stm32_lptim_cnt_read,
-	.function_get = stm32_lptim_cnt_function_get,
-	.function_set = stm32_lptim_cnt_function_set,
-	.action_get = stm32_lptim_cnt_action_get,
-	.action_set = stm32_lptim_cnt_action_set,
+	.function_read = stm32_lptim_cnt_function_read,
+	.function_write = stm32_lptim_cnt_function_write,
+	.action_read = stm32_lptim_cnt_action_read,
+	.action_write = stm32_lptim_cnt_action_write,
 };
 
 static struct counter_signal stm32_lptim_cnt_signals[] = {
drivers/counter/stm32-timer-cnt.c +1 -0
index 3fb0debd7425..c690b76e5dab 100644
@@ -13,6 +13,7 @@
 #include <linux/module.h>
 #include <linux/pinctrl/consumer.h>
 #include <linux/platform_device.h>
+#include <linux/types.h>
 
 #define TIM_CCMR_CCXS	(BIT(8) | BIT(0))
 #define TIM_CCMR_MASK	(TIM_CCMR_CC1S | TIM_CCMR_CC2S | \

drivers/counter/stm32-timer-cnt.c struct stm32_timer_cnt { · line 53

Quoted 9 lines
drivers/counter/stm32-timer-cnt.c +6 -0
@@ -44,21 +45,21 @@ struct stm32_timer_cnt {
  * @STM32_COUNT_ENCODER_MODE_3: counts on both TI1FP1 and TI2FP2 edges
  */
 enum stm32_count_function {
+	STM32_COUNT_SLAVE_MODE_DISABLED = COUNTER_FUNCTION_INCREASE,
+	STM32_COUNT_ENCODER_MODE_1 = COUNTER_FUNCTION_QUADRATURE_X2_A,
+	STM32_COUNT_ENCODER_MODE_2 = COUNTER_FUNCTION_QUADRATURE_X2_B,
+	STM32_COUNT_ENCODER_MODE_3 = COUNTER_FUNCTION_QUADRATURE_X4,
+};
+

Same as for the LPTIM driver above, I noticed the enum is removed from the 104-quad-8 driver.

Quoted 7 lines

I'm fine both ways... I just feel like this could be more consistent later in the function read/write routines to report enum from the counter_function definition (e.g. like COUNTER_FUNCTION_QUADRATURE_X4 instead of STM32_COUNT_ENCODER_MODE_3).

Thanks,
Fabrice

Yes, this enum is just used to alias those constants. If you think the code will be clearer by using the COUNTER_FUNCTION_* constants directly, then please do so.

I don't know whether this v10 revision of the patchset will be merged or if we'll need a v11. So send your updates for stm32-lptimer-cnt.c and stm32-timer-cnt.c to me directly and I'll squash them with this patch if we do have a v11; otherwise you can submit them separately to the mailing list if this v10 is merged afterall.

Thanks,

William Breathitt Gray

#42 lore raw

PATCH v10 23/33 counter: Update counter.h comments to reflect sysfs internalization

In reply to William Breathitt Gray

The Counter subsystem architecture and driver implementations have changed in order to handle Counter sysfs interactions in a more consistent way. This patch updates the Generic Counter interface header file comments to reflect the changes.

---
 drivers/counter/counter-core.c |  3 ++
 include/linux/counter.h        | 72 +++++++++++++++-------------------
 2 files changed, 35 insertions(+), 40 deletions(-)
drivers/counter/counter-core.c +3 -0
index e7dd6ea01c8a..407661c6feb0 100644
@@ -41,6 +41,9 @@ static struct bus_type counter_bus_type = {
  * This function registers a Counter to the system. A sysfs "counter" directory
  * will be created and populated with sysfs attributes correlating with the
  * Counter Signals, Synapses, and Counts respectively.
+ *
+ * RETURNS:
+ * 0 on success, negative error number on failure.
  */
 int counter_register(struct counter_device *const counter)
 {
include/linux/counter.h +32 -40

104 lines not on this page · raw message

Signature · 1 line
2.30.2
#43 lore raw

PATCH v10 24/33 docs: counter: Update to reflect sysfs internalization

In reply to William Breathitt Gray

The Counter subsystem architecture and driver implementations have changed in order to handle Counter sysfs interactions in a more consistent way. This patch updates the Generic Counter interface documentation to reflect the changes.

---
 Documentation/ABI/testing/sysfs-bus-counter  |   9 +-
 Documentation/driver-api/generic-counter.rst | 243 ++++++++++++++-----
 2 files changed, 185 insertions(+), 67 deletions(-)
Documentation/ABI/testing/sysfs-bus-counter +8 -1
index 29f54484183f..6353f0a2f8f8 100644
@@ -277,7 +277,14 @@ What:		/sys/bus/counter/devices/counterX/signalY/signal
 KernelVersion:	5.2
 Contact:	[email protected]
 Description:
-		Signal data of Signal Y represented as a string.
+		Signal level state of Signal Y. The following signal level
+		states are available:
+
+		low:
+			Low level state.
+
+		high:
+			High level state.
 
 What:		/sys/bus/counter/devices/counterX/signalY/synchronous_mode
 KernelVersion:	5.2
Documentation/driver-api/generic-counter.rst +177 -66

262 lines not on this page · raw message

Signature · 1 line
2.30.2
#44 lore raw

PATCH v10 25/33 counter: Move counter enums to uapi header

In reply to William Breathitt Gray

This is in preparation for a subsequent patch implementing a character device interface for the Counter subsystem.

---
 MAINTAINERS                  |  1 +
 include/linux/counter.h      | 42 +--------------------------
 include/uapi/linux/counter.h | 56 ++++++++++++++++++++++++++++++++++++
 3 files changed, 58 insertions(+), 41 deletions(-)
 create mode 100644 include/uapi/linux/counter.h
MAINTAINERS +1 -0
index 1508db256784..93233a07f5aa 100644
@@ -4581,6 +4581,7 @@ F:	Documentation/ABI/testing/sysfs-bus-counter
 F:	Documentation/driver-api/generic-counter.rst
 F:	drivers/counter/
 F:	include/linux/counter.h
+F:	include/uapi/linux/counter.h
 
 CPMAC ETHERNET DRIVER
 M:	Florian Fainelli <[email protected]>
include/linux/counter.h +1 -41

54 lines not on this page · raw message

include/uapi/linux/counter.h new file +56 -0

56 lines not on this page · raw message

Signature · 1 line
2.30.2
#45 lore raw

PATCH v10 26/33 counter: Add character device interface

In reply to William Breathitt Gray

This patch introduces a character device interface for the Counter subsystem. Device data is exposed through standard character device read operations. Device data is gathered when a Counter event is pushed by the respective Counter device driver. Configuration is handled via ioctl operations on the respective Counter character device node.

Cc David Lechner <[email protected]>
Cc Gwendal Grignou <[email protected]>
Cc Dan Carpenter <[email protected]>
Cc Oleksij Rempel <[email protected]>
---
 drivers/counter/Makefile         |   2 +-
 drivers/counter/counter-chrdev.c | 482 +++++++++++++++++++++++++++++++
 drivers/counter/counter-chrdev.h |  14 +
 drivers/counter/counter-core.c   |  44 ++-
 include/linux/counter.h          |  45 +++
 include/uapi/linux/counter.h     |  77 +++++
 6 files changed, 658 insertions(+), 6 deletions(-)
 create mode 100644 drivers/counter/counter-chrdev.c
 create mode 100644 drivers/counter/counter-chrdev.h
drivers/counter/Makefile +1 -1
index 9a31394cb926..5e274e04a415 100644
@@ -4,7 +4,7 @@
 #
 
 obj-$(CONFIG_COUNTER) += counter.o
-counter-y := counter-core.o counter-sysfs.o
+counter-y := counter-core.o counter-sysfs.o counter-chrdev.o
 
 obj-$(CONFIG_104_QUAD_8)	+= 104-quad-8.o
 obj-$(CONFIG_INTERRUPT_CNT)		+= interrupt-cnt.o
drivers/counter/counter-chrdev.c new file +482 -0

482 lines not on this page · raw message

drivers/counter/counter-chrdev.h new file +14 -0
new file mode 100644
index 000000000000..5529d16703c4
@@ -0,0 +1,14 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Counter character device interface
+ * Copyright (C) 2020 William Breathitt Gray
+ */
+#ifndef _COUNTER_CHRDEV_H_
+#define _COUNTER_CHRDEV_H_
+
+#include <linux/counter.h>
+
+int counter_chrdev_add(struct counter_device *const counter);
+void counter_chrdev_remove(struct counter_device *const counter);
+
+#endif /* _COUNTER_CHRDEV_H_ */
drivers/counter/counter-core.c +39 -5

103 lines not on this page · raw message

include/linux/counter.h +45 -0

90 lines not on this page · raw message

include/uapi/linux/counter.h +77 -0

89 lines not on this page · raw message

Signature · 1 line
2.30.2
#46 lore raw

PATCH v10 27/33 docs: counter: Document character device interface

In reply to William Breathitt Gray

This patch adds high-level documentation about the Counter subsystem character device interface.

---
 Documentation/driver-api/generic-counter.rst  | 185 ++++++++++++++----
 .../userspace-api/ioctl/ioctl-number.rst      |   1 +
 2 files changed, 145 insertions(+), 41 deletions(-)
Documentation/driver-api/generic-counter.rst +144 -41
index f6397218aa4c..62a702e7f994 100644
@@ -223,19 +223,6 @@ whether an input line is differential or single-ended) and instead focus
 on the core idea of what the data and process represent (e.g. position
 as interpreted from quadrature encoding data).
 
-Userspace Interface
-===================
-
-Several sysfs attributes are generated by the Generic Counter interface,
-and reside under the /sys/bus/counter/devices/counterX directory, where
-counterX refers to the respective counter device. Please see
-Documentation/ABI/testing/sysfs-bus-counter for detailed
-information on each Generic Counter interface sysfs attribute.
-
-Through these sysfs attributes, programs and scripts may interact with
-the Generic Counter paradigm Counts, Signals, and Synapses of respective
-counter devices.
-
 Driver API
 ==========
 
@@ -388,16 +375,16 @@ userspace interface components::
                         / driver callbacks /
                         -------------------
                                 |
-                +---------------+
-                |
-                V
-        +--------------------+
-        | Counter sysfs      |
-        +--------------------+
-        | Translates to the  |
-        | standard Counter   |
-        | sysfs output       |
-        +--------------------+
+                +---------------+---------------+
+                |                               |
+                V                               V
+        +--------------------+          +---------------------+
+        | Counter sysfs      |          | Counter chrdev      |
+        +--------------------+          +---------------------+
+        | Translates to the  |          | Translates to the   |
+        | standard Counter   |          | standard Counter    |
+        | sysfs output       |          | character device    |
+        +--------------------+          +---------------------+
 
 Thereafter, data can be transferred directly between the Counter device
 driver and Counter userspace interface::
@@ -428,23 +415,30 @@ driver and Counter userspace interface::
                         / u64     /
                         ----------
                                 |
-                +---------------+
-                |
-                V
-        +--------------------+
-        | Counter sysfs      |
-        +--------------------+
-        | Translates to the  |
-        | standard Counter   |
-        | sysfs output       |
-        |--------------------|
-        | Type: const char * |
-        | Value: "42"        |
-        +--------------------+
-                |
-         ---------------
-        / const char * /
-        ---------------
+                +---------------+---------------+
+                |                               |
+                V                               V
+        +--------------------+          +---------------------+
+        | Counter sysfs      |          | Counter chrdev      |
+        +--------------------+          +---------------------+
+        | Translates to the  |          | Translates to the   |
+        | standard Counter   |          | standard Counter    |
+        | sysfs output       |          | character device    |
+        |--------------------|          |---------------------|
+        | Type: const char * |          | Type: u64           |
+        | Value: "42"        |          | Value: 42           |
+        +--------------------+          +---------------------+
+                |                               |
+         ---------------                 -----------------------
+        / const char * /                / struct counter_event /
+        ---------------                 -----------------------
+                |                               |
+                |                               V
+                |                       +-----------+
+                |                       | read      |
+                |                       +-----------+
+                |                       \ Count: 42 /
+                |                        -----------
                 |
                 V
         +--------------------------------------------------+
@@ -453,7 +447,7 @@ driver and Counter userspace interface::
         \ Count: "42"                                      /
          --------------------------------------------------
 
-There are three primary components involved:
+There are four primary components involved:
 
 Counter device driver
 ---------------------
@@ -473,3 +467,112 @@ and vice versa.
 Please refer to the ``Documentation/ABI/testing/sysfs-bus-counter`` file
 for a detailed breakdown of the available Generic Counter interface
 sysfs attributes.
+
+Counter chrdev
+--------------
+Translates counter data to the standard Counter character device; data
+is transferred via standard character device read calls, while Counter
+events are configured via ioctl calls.
+
+Sysfs Interface
+===============
+
+Several sysfs attributes are generated by the Generic Counter interface,
+and reside under the ``/sys/bus/counter/devices/counterX`` directory,
+where ``X`` is to the respective counter device id. Please see
+``Documentation/ABI/testing/sysfs-bus-counter`` for detailed information
+on each Generic Counter interface sysfs attribute.
+
+Through these sysfs attributes, programs and scripts may interact with
+the Generic Counter paradigm Counts, Signals, and Synapses of respective
+counter devices.
+
+Counter Character Device
+========================
+
+Counter character device nodes are created under the ``/dev`` directory
+as ``counterX``, where ``X`` is the respective counter device id.
+Defines for the standard Counter data types are exposed via the
+userspace ``include/uapi/linux/counter.h`` file.
+
+Counter events
+--------------
+Counter device drivers can support Counter events by utilizing the
+``counter_push_event`` function::
+
+        void counter_push_event(struct counter_device *const counter, const u8 event,
+                                const u8 channel);
+
+The event id is specified by the ``event`` parameter; the event channel
+id is specified by the ``channel`` parameter. When this function is
+called, the Counter data associated with the respective event is
+gathered, and a ``struct counter_event`` is generated for each datum and
+pushed to userspace.
+
+Counter events can be configured by users to report various Counter
+data of interest. This can be conceptualized as a list of Counter
+component read calls to perform. For example::
+
+        +~~~~~~~~~~~~~~~~~~~~~~~~+~~~~~~~~~~~~~~~~~~~~~~~~+
+        | COUNTER_EVENT_OVERFLOW | COUNTER_EVENT_INDEX    |
+        +~~~~~~~~~~~~~~~~~~~~~~~~+~~~~~~~~~~~~~~~~~~~~~~~~+
+        | Channel 0              | Channel 0              |
+        +------------------------+------------------------+
+        | * Count 0              | * Signal 0             |
+        | * Count 1              | * Signal 0 Extension 0 |
+        | * Signal 3             | * Extension 4          |
+        | * Count 4 Extension 2  +------------------------+
+        | * Signal 5 Extension 0 | Channel 1              |
+        |                        +------------------------+
+        |                        | * Signal 4             |
+        |                        | * Signal 4 Extension 0 |
+        |                        | * Count 7              |
+        +------------------------+------------------------+
+
+When ``counter_push_event(counter, COUNTER_EVENT_INDEX, 1)`` is called
+for example, it will go down the list for the ``COUNTER_EVENT_INDEX``
+event channel 1 and execute the read callbacks for Signal 4, Signal 4
+Extension 0, and Count 4 -- the data returned for each is pushed to a
+kfifo as a ``struct counter_event``, which userspace can retrieve via a
+standard read operation on the respective character device node.
+
+Userspace
+---------
+Userspace applications can configure Counter events via ioctl operations
+on the Counter character device node. There following ioctl codes are
+supported and provided by the ``linux/counter.h`` userspace header file:
+
+* COUNTER_ADD_WATCH_IOCTL:
+  Queues a Counter watch for the specified event. The queued watches
+  will not be applied until ``COUNTER_ENABLE_EVENTS_IOCTL`` is called.
+
+* COUNTER_ENABLE_EVENTS_IOCTL:
+  Enables monitoring the events specified by the Counter watches that
+  were queued by ``COUNTER_ADD_WATCH_IOCTL``. If events are already
+  enabled, the new set of watches replaces the old one. Calling this
+  ioctl also has the effect of clearing the queue of watches added by
+  ``COUNTER_ADD_WATCH_IOCTL``.
+
+* COUNTER_DISABLE_EVENTS_IOCTL:
+  Stops monitoring the previously enabled events.
+
+To configure events to gather Counter data, users first populate a
+``struct counter_watch`` with the relevant event id, event channel id,
+and the information for the desired Counter component from which to
+read, and then pass it via the ``COUNTER_ADD_WATCH_IOCTL`` ioctl
+command.
+
+Note that an event can be watched without gathering Counter data by
+setting the ``component.type`` member equal to
+``COUNTER_COMPONENT_NONE``. With this configuration the Counter
+character device will simply populate the event timestamps for those
+respective ``struct counter_event`` elements and ignore the component
+value.
+
+The ``COUNTER_ADD_WATCH_IOCTL`` command will buffer these Counter
+watches. When ready, the ``COUNTER_ENABLE_EVENTS_IOCTL`` ioctl command
+may be used to activate these Counter watches.
+
+Userspace applications can then execute a ``read`` operation (optionally
+calling ``poll`` first) on the Counter character device node to retrieve
+``struct counter_event`` elements with the desired data.
Documentation/userspace-api/ioctl/ioctl-number.rst +1 -0
index 96b2ae9f277f..bb57eac06f6b 100644
@@ -88,6 +88,7 @@ Code  Seq#    Include File                                           Comments
                                                                      <http://infiniband.sourceforge.net/>
 0x20  all    drivers/cdrom/cm206.h
 0x22  all    scsi/sg.h
+0x3E  00-0F  linux/counter.h                                         <mailto:[email protected]>
 '!'   00-1F  uapi/linux/seccomp.h
 '#'   00-3F                                                          IEEE 1394 Subsystem
                                                                      Block for the entire subsystem
Signature · 1 line
2.30.2
#47 lore raw

PATCH v10 28/33 tools/counter: Create Counter tools

In reply to William Breathitt Gray

This creates an example Counter program under tools/counter/* to exemplify the Counter character device interface.

---
 MAINTAINERS                     |  1 +
 tools/Makefile                  | 13 ++---
 tools/counter/Build             |  1 +
 tools/counter/Makefile          | 53 ++++++++++++++++++
 tools/counter/counter_example.c | 95 +++++++++++++++++++++++++++++++++
 5 files changed, 157 insertions(+), 6 deletions(-)
 create mode 100644 tools/counter/Build
 create mode 100644 tools/counter/Makefile
 create mode 100644 tools/counter/counter_example.c
MAINTAINERS +1 -0
index 93233a07f5aa..aa61b40d02fe 100644
@@ -4582,6 +4582,7 @@ F:	Documentation/driver-api/generic-counter.rst
 F:	drivers/counter/
 F:	include/linux/counter.h
 F:	include/uapi/linux/counter.h
+F:	tools/counter/
 
 CPMAC ETHERNET DRIVER
 M:	Florian Fainelli <[email protected]>
tools/Makefile +7 -6
index 7e9d34ddd74c..4c26400ffc03 100644
@@ -12,6 +12,7 @@ help:
 	@echo '  acpi                   - ACPI tools'
 	@echo '  bpf                    - misc BPF tools'
 	@echo '  cgroup                 - cgroup tools'
+	@echo '  counter                - Counter tools'
 	@echo '  cpupower               - a tool for all things x86 CPU power'
 	@echo '  debugging              - tools for debugging'
 	@echo '  firewire               - the userspace part of nosy, an IEEE-1394 traffic sniffer'
@@ -65,7 +66,7 @@ acpi: FORCE
 cpupower: FORCE
 	$(call descend,power/$@)
 
-cgroup firewire hv guest bootconfig spi usb virtio vm bpf iio gpio objtool leds wmi pci firmware debugging tracing: FORCE
+cgroup counter firewire hv guest bootconfig spi usb virtio vm bpf iio gpio objtool leds wmi pci firmware debugging tracing: FORCE
 	$(call descend,$@)
 
 bpf/%: FORCE
@@ -100,7 +101,7 @@ freefall: FORCE
 kvm_stat: FORCE
 	$(call descend,kvm/$@)
 
-all: acpi cgroup cpupower gpio hv firewire liblockdep \
+all: acpi cgroup counter cpupower gpio hv firewire liblockdep \
 		perf selftests bootconfig spi turbostat usb \
 		virtio vm bpf x86_energy_perf_policy \
 		tmon freefall iio objtool kvm_stat wmi \
@@ -112,7 +113,7 @@ acpi_install:
 cpupower_install:
 	$(call descend,power/$(@:_install=),install)
 
-cgroup_install firewire_install gpio_install hv_install iio_install perf_install bootconfig_install spi_install usb_install virtio_install vm_install bpf_install objtool_install wmi_install pci_install debugging_install tracing_install:
+cgroup_install counter_install firewire_install gpio_install hv_install iio_install perf_install bootconfig_install spi_install usb_install virtio_install vm_install bpf_install objtool_install wmi_install pci_install debugging_install tracing_install:
 	$(call descend,$(@:_install=),install)
 
 liblockdep_install:
@@ -133,7 +134,7 @@ freefall_install:
 kvm_stat_install:
 	$(call descend,kvm/$(@:_install=),install)
 
-install: acpi_install cgroup_install cpupower_install gpio_install \
+install: acpi_install cgroup_install counter_install cpupower_install gpio_install \
 		hv_install firewire_install iio_install liblockdep_install \
 		perf_install selftests_install turbostat_install usb_install \
 		virtio_install vm_install bpf_install x86_energy_perf_policy_install \
@@ -147,7 +148,7 @@ acpi_clean:
 cpupower_clean:
 	$(call descend,power/cpupower,clean)
 
-cgroup_clean hv_clean firewire_clean bootconfig_clean spi_clean usb_clean virtio_clean vm_clean wmi_clean bpf_clean iio_clean gpio_clean objtool_clean leds_clean pci_clean firmware_clean debugging_clean tracing_clean:
+cgroup_clean counter_clean hv_clean firewire_clean bootconfig_clean spi_clean usb_clean virtio_clean vm_clean wmi_clean bpf_clean iio_clean gpio_clean objtool_clean leds_clean pci_clean firmware_clean debugging_clean tracing_clean:
 	$(call descend,$(@:_clean=),clean)
 
 liblockdep_clean:
@@ -181,7 +182,7 @@ freefall_clean:
 build_clean:
 	$(call descend,build,clean)
 
-clean: acpi_clean cgroup_clean cpupower_clean hv_clean firewire_clean \
+clean: acpi_clean cgroup_clean counter_clean cpupower_clean hv_clean firewire_clean \
 		perf_clean selftests_clean turbostat_clean bootconfig_clean spi_clean usb_clean virtio_clean \
 		vm_clean bpf_clean iio_clean x86_energy_perf_policy_clean tmon_clean \
 		freefall_clean build_clean libbpf_clean libsubcmd_clean liblockdep_clean \
tools/counter/Build new file +1 -0
new file mode 100644
index 000000000000..33f4a51d715e
@@ -0,0 +1 @@
+counter_example-y += counter_example.o
tools/counter/Makefile new file +53 -0

53 lines not on this page · raw message

tools/counter/counter_example.c new file +95 -0

95 lines not on this page · raw message

Signature · 1 line
2.30.2
#48 lore raw

PATCH v10 29/33 counter: Implement signalZ_action_component_id sysfs attribute

In reply to William Breathitt Gray

The Generic Counter chrdev interface expects users to supply component IDs in order to select Synapses for requests. In order for users to know what component ID belongs to which Synapse this information must be exposed. The signalZ_action_component_id attribute provides a way for users to discover what component ID belongs to the respective Synapse.

Cc David Lechner <[email protected]>
Cc Gwendal Grignou <[email protected]>
Cc Dan Carpenter <[email protected]>
---
 Documentation/ABI/testing/sysfs-bus-counter |  7 ++++
 drivers/counter/counter-sysfs.c             | 45 +++++++++++++++++++++
 2 files changed, 52 insertions(+)
Documentation/ABI/testing/sysfs-bus-counter +7 -0
index 6353f0a2f8f8..bee9289aecd1 100644
@@ -203,6 +203,13 @@ Description:
 		both edges:
 			Any state transition.
 
+What:		/sys/bus/counter/devices/counterX/countY/signalZ_action_component_id
+KernelVersion:	5.13
+Contact:	[email protected]
+Description:
+		Read-only attribute that indicates the component ID of the
+		respective Synapse of Count Y for Signal Z.
+
 What:		/sys/bus/counter/devices/counterX/name
 KernelVersion:	5.2
 Contact:	[email protected]
drivers/counter/counter-sysfs.c +45 -0

57 lines not on this page · raw message

Signature · 1 line
2.30.2
#49 lore raw

PATCH v10 30/33 counter: Implement *_component_id sysfs attributes

In reply to William Breathitt Gray

The Generic Counter chrdev interface expects users to supply component IDs in order to select extensions for requests. In order for users to know what component ID belongs to which extension this information must be exposed. The *_component_id attribute provides a way for users to discover what component ID belongs to which respective extension.

Cc David Lechner <[email protected]>
Cc Gwendal Grignou <[email protected]>
Cc Dan Carpenter <[email protected]>
---
 Documentation/ABI/testing/sysfs-bus-counter | 16 ++++++++++-
 drivers/counter/counter-sysfs.c             | 30 ++++++++++++++++-----
 2 files changed, 39 insertions(+), 7 deletions(-)
Documentation/ABI/testing/sysfs-bus-counter +15 -1
index bee9289aecd1..57b051ba53a9 100644
@@ -203,12 +203,26 @@ Description:
 		both edges:
 			Any state transition.
 
+What:		/sys/bus/counter/devices/counterX/countY/ceiling_component_id
+What:		/sys/bus/counter/devices/counterX/countY/floor_component_id
+What:		/sys/bus/counter/devices/counterX/countY/count_mode_component_id
+What:		/sys/bus/counter/devices/counterX/countY/direction_component_id
+What:		/sys/bus/counter/devices/counterX/countY/enable_component_id
+What:		/sys/bus/counter/devices/counterX/countY/error_noise_component_id
+What:		/sys/bus/counter/devices/counterX/countY/prescaler_component_id
+What:		/sys/bus/counter/devices/counterX/countY/preset_component_id
+What:		/sys/bus/counter/devices/counterX/countY/preset_enable_component_id
 What:		/sys/bus/counter/devices/counterX/countY/signalZ_action_component_id
+What:		/sys/bus/counter/devices/counterX/signalY/cable_fault_component_id
+What:		/sys/bus/counter/devices/counterX/signalY/cable_fault_enable_component_id
+What:		/sys/bus/counter/devices/counterX/signalY/filter_clock_prescaler_component_id
+What:		/sys/bus/counter/devices/counterX/signalY/index_polarity_component_id
+What:		/sys/bus/counter/devices/counterX/signalY/synchronous_mode_component_id
 KernelVersion:	5.13
 Contact:	[email protected]
 Description:
 		Read-only attribute that indicates the component ID of the
-		respective Synapse of Count Y for Signal Z.
+		respective extension or Synapse.
 
 What:		/sys/bus/counter/devices/counterX/name
 KernelVersion:	5.2
drivers/counter/counter-sysfs.c +24 -6
index bb49a10f160b..eb1505bfbd89 100644
@@ -587,6 +587,7 @@ static int counter_signal_attrs_create(struct counter_device *const counter,
 	int err;
 	struct counter_comp comp;
 	size_t i;
+	struct counter_comp *ext;
 
 	/* Create main Signal attribute */
 	comp = counter_signal_comp;
@@ -602,8 +603,13 @@ static int counter_signal_attrs_create(struct counter_device *const counter,
 
 	/* Create an attribute for each extension */
 	for (i = 0; i < signal->num_ext; i++) {
-		err = counter_attr_create(dev, group, signal->ext + i, scope,
-					  signal);
+		ext = signal->ext + i;
+
+		err = counter_attr_create(dev, group, ext, scope, signal);
+		if (err < 0)
+			return err;
+
+		err = counter_comp_id_attr_create(dev, group, ext->name, i);
 		if (err < 0)
 			return err;
 	}
@@ -694,6 +700,7 @@ static int counter_count_attrs_create(struct counter_device *const counter,
 	int err;
 	struct counter_comp comp;
 	size_t i;
+	struct counter_comp *ext;
 
 	/* Create main Count attribute */
 	comp = counter_count_comp;
@@ -718,8 +725,13 @@ static int counter_count_attrs_create(struct counter_device *const counter,
 
 	/* Create an attribute for each extension */
 	for (i = 0; i < count->num_ext; i++) {
-		err = counter_attr_create(dev, group, count->ext + i, scope,
-					  count);
+		ext = count->ext + i;
+
+		err = counter_attr_create(dev, group, ext, scope, count);
+		if (err < 0)
+			return err;
+
+		err = counter_comp_id_attr_create(dev, group, ext->name, i);
 		if (err < 0)
 			return err;
 	}
@@ -783,6 +795,7 @@ static int counter_sysfs_attr_add(struct counter_device *const counter,
 	struct device *const dev = &counter->dev;
 	int err;
 	size_t i;
+	struct counter_comp *ext;
 
 	/* Add Signals sysfs attributes */
 	err = counter_sysfs_signals_add(counter, group);
@@ -815,8 +828,13 @@ static int counter_sysfs_attr_add(struct counter_device *const counter,
 
 	/* Create an attribute for each extension */
 	for (i = 0; i < counter->num_ext; i++) {
-		err = counter_attr_create(dev, group, counter->ext + i, scope,
-					  NULL);
+		ext = counter->ext + i;
+
+		err = counter_attr_create(dev, group, ext, scope, NULL);
+		if (err < 0)
+			return err;
+
+		err = counter_comp_id_attr_create(dev, group, ext->name, i);
 		if (err < 0)
 			return err;
 	}
Signature · 1 line
2.30.2
#50 lore raw

PATCH v10 31/33 counter: Implement events_queue_size sysfs attribute

In reply to William Breathitt Gray

The events_queue_size sysfs attribute provides a way for users to dynamically configure the Counter events queue size for the Counter character device interface. The size is in number of struct counter_event data structures. The number of elements will be rounded-up to a power of 2 due to a requirement of the kfifo_alloc function called during reallocation of the queue.

---
 Documentation/ABI/testing/sysfs-bus-counter |  8 ++++
 drivers/counter/counter-chrdev.c            |  4 ++
 drivers/counter/counter-sysfs.c             | 44 +++++++++++++++++++++
 include/linux/counter.h                     |  2 +
 4 files changed, 58 insertions(+)
Documentation/ABI/testing/sysfs-bus-counter +8 -0
index 57b051ba53a9..a97d85e97184 100644
@@ -224,6 +224,14 @@ Description:
 		Read-only attribute that indicates the component ID of the
 		respective extension or Synapse.
 
+What:		/sys/bus/counter/devices/counterX/events_queue_size
+KernelVersion:	5.13
+Contact:	[email protected]
+Description:
+		Size of the Counter events queue in number of struct
+		counter_event data structures. The number of elements will be
+		rounded-up to a power of 2.
+
 What:		/sys/bus/counter/devices/counterX/name
 KernelVersion:	5.2
 Contact:	[email protected]
drivers/counter/counter-chrdev.c +4 -0
index d5f92b2d3bb4..d9f123ca0ed6 100644
@@ -311,6 +311,9 @@ static int counter_chrdev_open(struct inode *inode, struct file *filp)
 							    typeof(*counter),
 							    chrdev);
 
+	if (!mutex_trylock(&counter->chrdev_lock))
+		return -EBUSY;
+
 	get_device(&counter->dev);
 	filp->private_data = counter;
 
@@ -327,6 +330,7 @@ static int counter_chrdev_release(struct inode *inode, struct file *filp)
 		return err;
 
 	put_device(&counter->dev);
+	mutex_unlock(&counter->chrdev_lock);
 
 	return 0;
 }
drivers/counter/counter-sysfs.c +44 -0

69 lines not on this page · raw message

include/linux/counter.h +2 -0
index 3f0bbe4ff702..854fcaf49c32 100644
@@ -289,6 +289,7 @@ struct counter_ops {
  * @priv:		optional private data supplied by driver
  * @dev:		internal device structure
  * @chrdev:		internal character device structure
+ * @chrdev_lock:	lock to limit chrdev to a single open at a time
  * @events_list:	list of current watching Counter events
  * @events_list_lock:	lock to protect Counter events list operations
  * @next_events_list:	list of next watching Counter events
@@ -314,6 +315,7 @@ struct counter_device {
 
 	struct device dev;
 	struct cdev chrdev;
+	struct mutex chrdev_lock;
 	struct list_head events_list;
 	spinlock_t events_list_lock;
 	struct list_head next_events_list;
Signature · 1 line
2.30.2
#51 lore raw

PATCH v10 32/33 counter: 104-quad-8: Replace mutex with spinlock

In reply to William Breathitt Gray

This patch replaces the mutex I/O lock with a spinlock. This is in preparation for a subsequent patch adding IRQ support for 104-QUAD-8 devices; we can't sleep in an interrupt context, so we'll need to use a spinlock instead.

---
 drivers/counter/104-quad-8.c | 90 +++++++++++++++++++++---------------
 1 file changed, 53 insertions(+), 37 deletions(-)
drivers/counter/104-quad-8.c +53 -37
index eb7d63769f4c..d46b8101f207 100644
@@ -16,6 +16,7 @@
 #include <linux/module.h>
 #include <linux/moduleparam.h>
 #include <linux/types.h>
+#include <linux/spinlock.h>
 
 #define QUAD8_EXTENT 32
 
@@ -28,6 +29,7 @@ MODULE_PARM_DESC(base, "ACCES 104-QUAD-8 base addresses");
 
 /**
  * struct quad8 - device private data structure
+ * @lock:		lock to prevent clobbering device states during R/W ops
  * @counter:		instance of the counter_device
  * @fck_prescaler:	array of filter clock prescaler configurations
  * @preset:		array of preset values
@@ -42,7 +44,7 @@ MODULE_PARM_DESC(base, "ACCES 104-QUAD-8 base addresses");
  * @base:		base port address of the device
  */
 struct quad8 {
-	struct mutex lock;
+	spinlock_t lock;
 	struct counter_device counter;
 	unsigned int fck_prescaler[QUAD8_NUM_COUNTERS];
 	unsigned int preset[QUAD8_NUM_COUNTERS];
@@ -123,6 +125,7 @@ static int quad8_count_read(struct counter_device *counter,
 	unsigned int flags;
 	unsigned int borrow;
 	unsigned int carry;
+	unsigned long irqflags;
 	int i;
 
 	flags = inb(base_offset + 1);
@@ -132,7 +135,7 @@ static int quad8_count_read(struct counter_device *counter,
 	/* Borrow XOR Carry effectively doubles count range */
 	*val = (unsigned long)(borrow ^ carry) << 24;
 
-	mutex_lock(&priv->lock);
+	spin_lock_irqsave(&priv->lock, irqflags);
 
 	/* Reset Byte Pointer; transfer Counter to Output Latch */
 	outb(QUAD8_CTR_RLD | QUAD8_RLD_RESET_BP | QUAD8_RLD_CNTR_OUT,
@@ -141,7 +144,7 @@ static int quad8_count_read(struct counter_device *counter,
 	for (i = 0; i < 3; i++)
 		*val |= (unsigned long)inb(base_offset) << (8 * i);
 
-	mutex_unlock(&priv->lock);
+	spin_unlock_irqrestore(&priv->lock, irqflags);
 
 	return 0;
 }
@@ -151,13 +154,14 @@ static int quad8_count_write(struct counter_device *counter,
 {
 	struct quad8 *const priv = counter->priv;
 	const int base_offset = priv->base + 2 * count->id;
+	unsigned long irqflags;
 	int i;
 
 	/* Only 24-bit values are supported */
 	if (val > 0xFFFFFF)
 		return -ERANGE;
 
-	mutex_lock(&priv->lock);
+	spin_lock_irqsave(&priv->lock, irqflags);
 
 	/* Reset Byte Pointer */
 	outb(QUAD8_CTR_RLD | QUAD8_RLD_RESET_BP, base_offset + 1);
@@ -182,7 +186,7 @@ static int quad8_count_write(struct counter_device *counter,
 	/* Reset Error flag */
 	outb(QUAD8_CTR_RLD | QUAD8_RLD_RESET_E, base_offset + 1);
 
-	mutex_unlock(&priv->lock);
+	spin_unlock_irqrestore(&priv->lock, irqflags);
 
 	return 0;
 }
@@ -200,8 +204,9 @@ static int quad8_function_read(struct counter_device *counter,
 {
 	struct quad8 *const priv = counter->priv;
 	const int id = count->id;
+	unsigned long irqflags;
 
-	mutex_lock(&priv->lock);
+	spin_lock_irqsave(&priv->lock, irqflags);
 
 	if (priv->quadrature_mode[id])
 		switch (priv->quadrature_scale[id]) {
@@ -218,7 +223,7 @@ static int quad8_function_read(struct counter_device *counter,
 	else
 		*function = COUNTER_FUNCTION_PULSE_DIRECTION;
 
-	mutex_unlock(&priv->lock);
+	spin_unlock_irqrestore(&priv->lock, irqflags);
 
 	return 0;
 }
@@ -233,10 +238,11 @@ static int quad8_function_write(struct counter_device *counter,
 	unsigned int *const scale = priv->quadrature_scale + id;
 	unsigned int *const synchronous_mode = priv->synchronous_mode + id;
 	const int base_offset = priv->base + 2 * id + 1;
+	unsigned long irqflags;
 	unsigned int mode_cfg;
 	unsigned int idr_cfg;
 
-	mutex_lock(&priv->lock);
+	spin_lock_irqsave(&priv->lock, irqflags);
 
 	mode_cfg = priv->count_mode[id] << 1;
 	idr_cfg = priv->index_polarity[id] << 1;
@@ -271,7 +277,7 @@ static int quad8_function_write(struct counter_device *counter,
 			break;
 		default:
 			/* should never reach this path */
-			mutex_unlock(&priv->lock);
+			spin_unlock_irqrestore(&priv->lock, irqflags);
 			return -EINVAL;
 		}
 	}
@@ -279,7 +285,7 @@ static int quad8_function_write(struct counter_device *counter,
 	/* Load mode configuration to Counter Mode Register */
 	outb(QUAD8_CTR_CMR | mode_cfg, base_offset);
 
-	mutex_unlock(&priv->lock);
+	spin_unlock_irqrestore(&priv->lock, irqflags);
 
 	return 0;
 }
@@ -405,9 +411,10 @@ static int quad8_index_polarity_set(struct counter_device *counter,
 	struct quad8 *const priv = counter->priv;
 	const size_t channel_id = signal->id - 16;
 	const int base_offset = priv->base + 2 * channel_id + 1;
+	unsigned long irqflags;
 	unsigned int idr_cfg = index_polarity << 1;
 
-	mutex_lock(&priv->lock);
+	spin_lock_irqsave(&priv->lock, irqflags);
 
 	idr_cfg |= priv->synchronous_mode[channel_id];
 
@@ -416,7 +423,7 @@ static int quad8_index_polarity_set(struct counter_device *counter,
 	/* Load Index Control configuration to Index Control Register */
 	outb(QUAD8_CTR_IDR | idr_cfg, base_offset);
 
-	mutex_unlock(&priv->lock);
+	spin_unlock_irqrestore(&priv->lock, irqflags);
 
 	return 0;
 }
@@ -445,15 +452,16 @@ static int quad8_synchronous_mode_set(struct counter_device *counter,
 	struct quad8 *const priv = counter->priv;
 	const size_t channel_id = signal->id - 16;
 	const int base_offset = priv->base + 2 * channel_id + 1;
+	unsigned long irqflags;
 	unsigned int idr_cfg = synchronous_mode;
 
-	mutex_lock(&priv->lock);
+	spin_lock_irqsave(&priv->lock, irqflags);
 
 	idr_cfg |= priv->index_polarity[channel_id] << 1;
 
 	/* Index function must be non-synchronous in non-quadrature mode */
 	if (synchronous_mode && !priv->quadrature_mode[channel_id]) {
-		mutex_unlock(&priv->lock);
+		spin_unlock_irqrestore(&priv->lock, irqflags);
 		return -EINVAL;
 	}
 
@@ -462,7 +470,7 @@ static int quad8_synchronous_mode_set(struct counter_device *counter,
 	/* Load Index Control configuration to Index Control Register */
 	outb(QUAD8_CTR_IDR | idr_cfg, base_offset);
 
-	mutex_unlock(&priv->lock);
+	spin_unlock_irqrestore(&priv->lock, irqflags);
 
 	return 0;
 }
@@ -509,6 +517,7 @@ static int quad8_count_mode_write(struct counter_device *counter,
 	unsigned int count_mode;
 	unsigned int mode_cfg;
 	const int base_offset = priv->base + 2 * count->id + 1;
+	unsigned long irqflags;
 
 	/* Map Generic Counter count mode to 104-QUAD-8 count mode */
 	switch (cnt_mode) {
@@ -529,7 +538,7 @@ static int quad8_count_mode_write(struct counter_device *counter,
 		return -EINVAL;
 	}
 
-	mutex_lock(&priv->lock);
+	spin_lock_irqsave(&priv->lock, irqflags);
 
 	priv->count_mode[count->id] = count_mode;
 
@@ -543,7 +552,7 @@ static int quad8_count_mode_write(struct counter_device *counter,
 	/* Load mode configuration to Counter Mode Register */
 	outb(QUAD8_CTR_CMR | mode_cfg, base_offset);
 
-	mutex_unlock(&priv->lock);
+	spin_unlock_irqrestore(&priv->lock, irqflags);
 
 	return 0;
 }
@@ -563,9 +572,10 @@ static int quad8_count_enable_write(struct counter_device *counter,
 {
 	struct quad8 *const priv = counter->priv;
 	const int base_offset = priv->base + 2 * count->id;
+	unsigned long irqflags;
 	unsigned int ior_cfg;
 
-	mutex_lock(&priv->lock);
+	spin_lock_irqsave(&priv->lock, irqflags);
 
 	priv->ab_enable[count->id] = enable;
 
@@ -574,7 +584,7 @@ static int quad8_count_enable_write(struct counter_device *counter,
 	/* Load I/O control configuration */
 	outb(QUAD8_CTR_IOR | ior_cfg, base_offset + 1);
 
-	mutex_unlock(&priv->lock);
+	spin_unlock_irqrestore(&priv->lock, irqflags);
 
 	return 0;
 }
@@ -625,16 +635,17 @@ static int quad8_count_preset_write(struct counter_device *counter,
 				    struct counter_count *count, u64 preset)
 {
 	struct quad8 *const priv = counter->priv;
+	unsigned long irqflags;
 
 	/* Only 24-bit values are supported */
 	if (preset > 0xFFFFFF)
 		return -ERANGE;
 
-	mutex_lock(&priv->lock);
+	spin_lock_irqsave(&priv->lock, irqflags);
 
 	quad8_preset_register_set(priv, count->id, preset);
 
-	mutex_unlock(&priv->lock);
+	spin_unlock_irqrestore(&priv->lock, irqflags);
 
 	return 0;
 }
@@ -643,8 +654,9 @@ static int quad8_count_ceiling_read(struct counter_device *counter,
 				    struct counter_count *count, u64 *ceiling)
 {
 	struct quad8 *const priv = counter->priv;
+	unsigned long irqflags;
 
-	mutex_lock(&priv->lock);
+	spin_lock_irqsave(&priv->lock, irqflags);
 
 	/* Range Limit and Modulo-N count modes use preset value as ceiling */
 	switch (priv->count_mode[count->id]) {
@@ -658,7 +670,7 @@ static int quad8_count_ceiling_read(struct counter_device *counter,
 		break;
 	}
 
-	mutex_unlock(&priv->lock);
+	spin_unlock_irqrestore(&priv->lock, irqflags);
 
 	return 0;
 }
@@ -667,23 +679,24 @@ static int quad8_count_ceiling_write(struct counter_device *counter,
 				     struct counter_count *count, u64 ceiling)
 {
 	struct quad8 *const priv = counter->priv;
+	unsigned long irqflags;
 
 	/* Only 24-bit values are supported */
 	if (ceiling > 0xFFFFFF)
 		return -ERANGE;
 
-	mutex_lock(&priv->lock);
+	spin_lock_irqsave(&priv->lock, irqflags);
 
 	/* Range Limit and Modulo-N count modes use preset value as ceiling */
 	switch (priv->count_mode[count->id]) {
 	case 1:
 	case 3:
-		mutex_unlock(&priv->lock);
+		spin_unlock_irqrestore(&priv->lock, irqflags);
 		quad8_preset_register_set(priv, count->id, ceiling);
 		return 0;
 	}
 
-	mutex_unlock(&priv->lock);
+	spin_unlock_irqrestore(&priv->lock, irqflags);
 
 	return -EINVAL;
 }
@@ -705,12 +718,13 @@ static int quad8_count_preset_enable_write(struct counter_device *counter,
 {
 	struct quad8 *const priv = counter->priv;
 	const int base_offset = priv->base + 2 * count->id + 1;
+	unsigned long irqflags;
 	unsigned int ior_cfg;
 
 	/* Preset enable is active low in Input/Output Control register */
 	preset_enable = !preset_enable;
 
-	mutex_lock(&priv->lock);
+	spin_lock_irqsave(&priv->lock, irqflags);
 
 	priv->preset_enable[count->id] = preset_enable;
 
@@ -719,7 +733,7 @@ static int quad8_count_preset_enable_write(struct counter_device *counter,
 	/* Load I/O control configuration to Input / Output Control Register */
 	outb(QUAD8_CTR_IOR | ior_cfg, base_offset);
 
-	mutex_unlock(&priv->lock);
+	spin_unlock_irqrestore(&priv->lock, irqflags);
 
 	return 0;
 }
@@ -730,22 +744,23 @@ static int quad8_signal_cable_fault_read(struct counter_device *counter,
 {
 	struct quad8 *const priv = counter->priv;
 	const size_t channel_id = signal->id / 2;
+	unsigned long irqflags;
 	bool disabled;
 	unsigned int status;
 
-	mutex_lock(&priv->lock);
+	spin_lock_irqsave(&priv->lock, irqflags);
 
 	disabled = !(priv->cable_fault_enable & BIT(channel_id));
 
 	if (disabled) {
-		mutex_unlock(&priv->lock);
+		spin_unlock_irqrestore(&priv->lock, irqflags);
 		return -EINVAL;
 	}
 
 	/* Logic 0 = cable fault */
 	status = inb(priv->base + QUAD8_DIFF_ENCODER_CABLE_STATUS);
 
-	mutex_unlock(&priv->lock);
+	spin_unlock_irqrestore(&priv->lock, irqflags);
 
 	/* Mask respective channel and invert logic */
 	*cable_fault = !(status & BIT(channel_id));
@@ -771,9 +786,10 @@ static int quad8_signal_cable_fault_enable_write(struct counter_device *counter,
 {
 	struct quad8 *const priv = counter->priv;
 	const size_t channel_id = signal->id / 2;
+	unsigned long irqflags;
 	unsigned int cable_fault_enable;
 
-	mutex_lock(&priv->lock);
+	spin_lock_irqsave(&priv->lock, irqflags);
 
 	if (enable)
 		priv->cable_fault_enable |= BIT(channel_id);
@@ -785,7 +801,7 @@ static int quad8_signal_cable_fault_enable_write(struct counter_device *counter,
 
 	outb(cable_fault_enable, priv->base + QUAD8_DIFF_ENCODER_CABLE_STATUS);
 
-	mutex_unlock(&priv->lock);
+	spin_unlock_irqrestore(&priv->lock, irqflags);
 
 	return 0;
 }
@@ -808,8 +824,9 @@ static int quad8_signal_fck_prescaler_write(struct counter_device *counter,
 	struct quad8 *const priv = counter->priv;
 	const size_t channel_id = signal->id / 2;
 	const int base_offset = priv->base + 2 * channel_id;
+	unsigned long irqflags;
 
-	mutex_lock(&priv->lock);
+	spin_lock_irqsave(&priv->lock, irqflags);
 
 	priv->fck_prescaler[channel_id] = prescaler;
 
@@ -821,7 +838,7 @@ static int quad8_signal_fck_prescaler_write(struct counter_device *counter,
 	outb(QUAD8_CTR_RLD | QUAD8_RLD_RESET_BP | QUAD8_RLD_PRESET_PSC,
 	     base_offset + 1);
 
-	mutex_unlock(&priv->lock);
+	spin_unlock_irqrestore(&priv->lock, irqflags);
 
 	return 0;
 }
@@ -990,8 +1007,7 @@ static int quad8_probe(struct device *dev, unsigned int id)
 	priv->counter.priv = priv;
 	priv->base = base[id];
 
-	/* Initialize mutex */
-	mutex_init(&priv->lock);
+	spin_lock_init(&priv->lock);
 
 	/* Reset all counters and disable interrupt function */
 	outb(QUAD8_CHAN_OP_RESET_COUNTERS, base[id] + QUAD8_REG_CHAN_OP);
Signature · 1 line
2.30.2
Acked-by on v10 32/33
#52 lore raw

Re: [PATCH v10 32/33] counter: 104-quad-8: Replace mutex with spinlock

Quoted 10 lines · William Breathitt Gray

This patch replaces the mutex I/O lock with a spinlock. This is in preparation for a subsequent patch adding IRQ support for 104-QUAD-8 devices; we can't sleep in an interrupt context, so we'll need to use a spinlock instead.

---
 drivers/counter/104-quad-8.c | 90 +++++++++++++++++++++---------------
 1 file changed, 53 insertions(+), 37 deletions(-)
Quoted 401 lines
drivers/counter/104-quad-8.c +53 -37
index eb7d63769f4c..d46b8101f207 100644
@@ -16,6 +16,7 @@
 #include <linux/module.h>
 #include <linux/moduleparam.h>
 #include <linux/types.h>
+#include <linux/spinlock.h>
 
 #define QUAD8_EXTENT 32
 
@@ -28,6 +29,7 @@ MODULE_PARM_DESC(base, "ACCES 104-QUAD-8 base addresses");
 
 /**
  * struct quad8 - device private data structure
+ * @lock:		lock to prevent clobbering device states during R/W ops
  * @counter:		instance of the counter_device
  * @fck_prescaler:	array of filter clock prescaler configurations
  * @preset:		array of preset values
@@ -42,7 +44,7 @@ MODULE_PARM_DESC(base, "ACCES 104-QUAD-8 base addresses");
  * @base:		base port address of the device
  */
 struct quad8 {
-	struct mutex lock;
+	spinlock_t lock;
 	struct counter_device counter;
 	unsigned int fck_prescaler[QUAD8_NUM_COUNTERS];
 	unsigned int preset[QUAD8_NUM_COUNTERS];
@@ -123,6 +125,7 @@ static int quad8_count_read(struct counter_device *counter,
 	unsigned int flags;
 	unsigned int borrow;
 	unsigned int carry;
+	unsigned long irqflags;
 	int i;
 
 	flags = inb(base_offset + 1);
@@ -132,7 +135,7 @@ static int quad8_count_read(struct counter_device *counter,
 	/* Borrow XOR Carry effectively doubles count range */
 	*val = (unsigned long)(borrow ^ carry) << 24;
 
-	mutex_lock(&priv->lock);
+	spin_lock_irqsave(&priv->lock, irqflags);
 
 	/* Reset Byte Pointer; transfer Counter to Output Latch */
 	outb(QUAD8_CTR_RLD | QUAD8_RLD_RESET_BP | QUAD8_RLD_CNTR_OUT,
@@ -141,7 +144,7 @@ static int quad8_count_read(struct counter_device *counter,
 	for (i = 0; i < 3; i++)
 		*val |= (unsigned long)inb(base_offset) << (8 * i);
 
-	mutex_unlock(&priv->lock);
+	spin_unlock_irqrestore(&priv->lock, irqflags);
 
 	return 0;
 }
@@ -151,13 +154,14 @@ static int quad8_count_write(struct counter_device *counter,
 {
 	struct quad8 *const priv = counter->priv;
 	const int base_offset = priv->base + 2 * count->id;
+	unsigned long irqflags;
 	int i;
 
 	/* Only 24-bit values are supported */
 	if (val > 0xFFFFFF)
 		return -ERANGE;
 
-	mutex_lock(&priv->lock);
+	spin_lock_irqsave(&priv->lock, irqflags);
 
 	/* Reset Byte Pointer */
 	outb(QUAD8_CTR_RLD | QUAD8_RLD_RESET_BP, base_offset + 1);
@@ -182,7 +186,7 @@ static int quad8_count_write(struct counter_device *counter,
 	/* Reset Error flag */
 	outb(QUAD8_CTR_RLD | QUAD8_RLD_RESET_E, base_offset + 1);
 
-	mutex_unlock(&priv->lock);
+	spin_unlock_irqrestore(&priv->lock, irqflags);
 
 	return 0;
 }
@@ -200,8 +204,9 @@ static int quad8_function_read(struct counter_device *counter,
 {
 	struct quad8 *const priv = counter->priv;
 	const int id = count->id;
+	unsigned long irqflags;
 
-	mutex_lock(&priv->lock);
+	spin_lock_irqsave(&priv->lock, irqflags);
 
 	if (priv->quadrature_mode[id])
 		switch (priv->quadrature_scale[id]) {
@@ -218,7 +223,7 @@ static int quad8_function_read(struct counter_device *counter,
 	else
 		*function = COUNTER_FUNCTION_PULSE_DIRECTION;
 
-	mutex_unlock(&priv->lock);
+	spin_unlock_irqrestore(&priv->lock, irqflags);
 
 	return 0;
 }
@@ -233,10 +238,11 @@ static int quad8_function_write(struct counter_device *counter,
 	unsigned int *const scale = priv->quadrature_scale + id;
 	unsigned int *const synchronous_mode = priv->synchronous_mode + id;
 	const int base_offset = priv->base + 2 * id + 1;
+	unsigned long irqflags;
 	unsigned int mode_cfg;
 	unsigned int idr_cfg;
 
-	mutex_lock(&priv->lock);
+	spin_lock_irqsave(&priv->lock, irqflags);
 
 	mode_cfg = priv->count_mode[id] << 1;
 	idr_cfg = priv->index_polarity[id] << 1;
@@ -271,7 +277,7 @@ static int quad8_function_write(struct counter_device *counter,
 			break;
 		default:
 			/* should never reach this path */
-			mutex_unlock(&priv->lock);
+			spin_unlock_irqrestore(&priv->lock, irqflags);
 			return -EINVAL;
 		}
 	}
@@ -279,7 +285,7 @@ static int quad8_function_write(struct counter_device *counter,
 	/* Load mode configuration to Counter Mode Register */
 	outb(QUAD8_CTR_CMR | mode_cfg, base_offset);
 
-	mutex_unlock(&priv->lock);
+	spin_unlock_irqrestore(&priv->lock, irqflags);
 
 	return 0;
 }
@@ -405,9 +411,10 @@ static int quad8_index_polarity_set(struct counter_device *counter,
 	struct quad8 *const priv = counter->priv;
 	const size_t channel_id = signal->id - 16;
 	const int base_offset = priv->base + 2 * channel_id + 1;
+	unsigned long irqflags;
 	unsigned int idr_cfg = index_polarity << 1;
 
-	mutex_lock(&priv->lock);
+	spin_lock_irqsave(&priv->lock, irqflags);
 
 	idr_cfg |= priv->synchronous_mode[channel_id];
 
@@ -416,7 +423,7 @@ static int quad8_index_polarity_set(struct counter_device *counter,
 	/* Load Index Control configuration to Index Control Register */
 	outb(QUAD8_CTR_IDR | idr_cfg, base_offset);
 
-	mutex_unlock(&priv->lock);
+	spin_unlock_irqrestore(&priv->lock, irqflags);
 
 	return 0;
 }
@@ -445,15 +452,16 @@ static int quad8_synchronous_mode_set(struct counter_device *counter,
 	struct quad8 *const priv = counter->priv;
 	const size_t channel_id = signal->id - 16;
 	const int base_offset = priv->base + 2 * channel_id + 1;
+	unsigned long irqflags;
 	unsigned int idr_cfg = synchronous_mode;
 
-	mutex_lock(&priv->lock);
+	spin_lock_irqsave(&priv->lock, irqflags);
 
 	idr_cfg |= priv->index_polarity[channel_id] << 1;
 
 	/* Index function must be non-synchronous in non-quadrature mode */
 	if (synchronous_mode && !priv->quadrature_mode[channel_id]) {
-		mutex_unlock(&priv->lock);
+		spin_unlock_irqrestore(&priv->lock, irqflags);
 		return -EINVAL;
 	}
 
@@ -462,7 +470,7 @@ static int quad8_synchronous_mode_set(struct counter_device *counter,
 	/* Load Index Control configuration to Index Control Register */
 	outb(QUAD8_CTR_IDR | idr_cfg, base_offset);
 
-	mutex_unlock(&priv->lock);
+	spin_unlock_irqrestore(&priv->lock, irqflags);
 
 	return 0;
 }
@@ -509,6 +517,7 @@ static int quad8_count_mode_write(struct counter_device *counter,
 	unsigned int count_mode;
 	unsigned int mode_cfg;
 	const int base_offset = priv->base + 2 * count->id + 1;
+	unsigned long irqflags;
 
 	/* Map Generic Counter count mode to 104-QUAD-8 count mode */
 	switch (cnt_mode) {
@@ -529,7 +538,7 @@ static int quad8_count_mode_write(struct counter_device *counter,
 		return -EINVAL;
 	}
 
-	mutex_lock(&priv->lock);
+	spin_lock_irqsave(&priv->lock, irqflags);
 
 	priv->count_mode[count->id] = count_mode;
 
@@ -543,7 +552,7 @@ static int quad8_count_mode_write(struct counter_device *counter,
 	/* Load mode configuration to Counter Mode Register */
 	outb(QUAD8_CTR_CMR | mode_cfg, base_offset);
 
-	mutex_unlock(&priv->lock);
+	spin_unlock_irqrestore(&priv->lock, irqflags);
 
 	return 0;
 }
@@ -563,9 +572,10 @@ static int quad8_count_enable_write(struct counter_device *counter,
 {
 	struct quad8 *const priv = counter->priv;
 	const int base_offset = priv->base + 2 * count->id;
+	unsigned long irqflags;
 	unsigned int ior_cfg;
 
-	mutex_lock(&priv->lock);
+	spin_lock_irqsave(&priv->lock, irqflags);
 
 	priv->ab_enable[count->id] = enable;
 
@@ -574,7 +584,7 @@ static int quad8_count_enable_write(struct counter_device *counter,
 	/* Load I/O control configuration */
 	outb(QUAD8_CTR_IOR | ior_cfg, base_offset + 1);
 
-	mutex_unlock(&priv->lock);
+	spin_unlock_irqrestore(&priv->lock, irqflags);
 
 	return 0;
 }
@@ -625,16 +635,17 @@ static int quad8_count_preset_write(struct counter_device *counter,
 				    struct counter_count *count, u64 preset)
 {
 	struct quad8 *const priv = counter->priv;
+	unsigned long irqflags;
 
 	/* Only 24-bit values are supported */
 	if (preset > 0xFFFFFF)
 		return -ERANGE;
 
-	mutex_lock(&priv->lock);
+	spin_lock_irqsave(&priv->lock, irqflags);
 
 	quad8_preset_register_set(priv, count->id, preset);
 
-	mutex_unlock(&priv->lock);
+	spin_unlock_irqrestore(&priv->lock, irqflags);
 
 	return 0;
 }
@@ -643,8 +654,9 @@ static int quad8_count_ceiling_read(struct counter_device *counter,
 				    struct counter_count *count, u64 *ceiling)
 {
 	struct quad8 *const priv = counter->priv;
+	unsigned long irqflags;
 
-	mutex_lock(&priv->lock);
+	spin_lock_irqsave(&priv->lock, irqflags);
 
 	/* Range Limit and Modulo-N count modes use preset value as ceiling */
 	switch (priv->count_mode[count->id]) {
@@ -658,7 +670,7 @@ static int quad8_count_ceiling_read(struct counter_device *counter,
 		break;
 	}
 
-	mutex_unlock(&priv->lock);
+	spin_unlock_irqrestore(&priv->lock, irqflags);
 
 	return 0;
 }
@@ -667,23 +679,24 @@ static int quad8_count_ceiling_write(struct counter_device *counter,
 				     struct counter_count *count, u64 ceiling)
 {
 	struct quad8 *const priv = counter->priv;
+	unsigned long irqflags;
 
 	/* Only 24-bit values are supported */
 	if (ceiling > 0xFFFFFF)
 		return -ERANGE;
 
-	mutex_lock(&priv->lock);
+	spin_lock_irqsave(&priv->lock, irqflags);
 
 	/* Range Limit and Modulo-N count modes use preset value as ceiling */
 	switch (priv->count_mode[count->id]) {
 	case 1:
 	case 3:
-		mutex_unlock(&priv->lock);
+		spin_unlock_irqrestore(&priv->lock, irqflags);
 		quad8_preset_register_set(priv, count->id, ceiling);
 		return 0;
 	}
 
-	mutex_unlock(&priv->lock);
+	spin_unlock_irqrestore(&priv->lock, irqflags);
 
 	return -EINVAL;
 }
@@ -705,12 +718,13 @@ static int quad8_count_preset_enable_write(struct counter_device *counter,
 {
 	struct quad8 *const priv = counter->priv;
 	const int base_offset = priv->base + 2 * count->id + 1;
+	unsigned long irqflags;
 	unsigned int ior_cfg;
 
 	/* Preset enable is active low in Input/Output Control register */
 	preset_enable = !preset_enable;
 
-	mutex_lock(&priv->lock);
+	spin_lock_irqsave(&priv->lock, irqflags);
 
 	priv->preset_enable[count->id] = preset_enable;
 
@@ -719,7 +733,7 @@ static int quad8_count_preset_enable_write(struct counter_device *counter,
 	/* Load I/O control configuration to Input / Output Control Register */
 	outb(QUAD8_CTR_IOR | ior_cfg, base_offset);
 
-	mutex_unlock(&priv->lock);
+	spin_unlock_irqrestore(&priv->lock, irqflags);
 
 	return 0;
 }
@@ -730,22 +744,23 @@ static int quad8_signal_cable_fault_read(struct counter_device *counter,
 {
 	struct quad8 *const priv = counter->priv;
 	const size_t channel_id = signal->id / 2;
+	unsigned long irqflags;
 	bool disabled;
 	unsigned int status;
 
-	mutex_lock(&priv->lock);
+	spin_lock_irqsave(&priv->lock, irqflags);
 
 	disabled = !(priv->cable_fault_enable & BIT(channel_id));
 
 	if (disabled) {
-		mutex_unlock(&priv->lock);
+		spin_unlock_irqrestore(&priv->lock, irqflags);
 		return -EINVAL;
 	}
 
 	/* Logic 0 = cable fault */
 	status = inb(priv->base + QUAD8_DIFF_ENCODER_CABLE_STATUS);
 
-	mutex_unlock(&priv->lock);
+	spin_unlock_irqrestore(&priv->lock, irqflags);
 
 	/* Mask respective channel and invert logic */
 	*cable_fault = !(status & BIT(channel_id));
@@ -771,9 +786,10 @@ static int quad8_signal_cable_fault_enable_write(struct counter_device *counter,
 {
 	struct quad8 *const priv = counter->priv;
 	const size_t channel_id = signal->id / 2;
+	unsigned long irqflags;
 	unsigned int cable_fault_enable;
 
-	mutex_lock(&priv->lock);
+	spin_lock_irqsave(&priv->lock, irqflags);
 
 	if (enable)
 		priv->cable_fault_enable |= BIT(channel_id);
@@ -785,7 +801,7 @@ static int quad8_signal_cable_fault_enable_write(struct counter_device *counter,
 
 	outb(cable_fault_enable, priv->base + QUAD8_DIFF_ENCODER_CABLE_STATUS);
 
-	mutex_unlock(&priv->lock);
+	spin_unlock_irqrestore(&priv->lock, irqflags);
 
 	return 0;
 }
@@ -808,8 +824,9 @@ static int quad8_signal_fck_prescaler_write(struct counter_device *counter,
 	struct quad8 *const priv = counter->priv;
 	const size_t channel_id = signal->id / 2;
 	const int base_offset = priv->base + 2 * channel_id;
+	unsigned long irqflags;
 
-	mutex_lock(&priv->lock);
+	spin_lock_irqsave(&priv->lock, irqflags);
 
 	priv->fck_prescaler[channel_id] = prescaler;
 
@@ -821,7 +838,7 @@ static int quad8_signal_fck_prescaler_write(struct counter_device *counter,
 	outb(QUAD8_CTR_RLD | QUAD8_RLD_RESET_BP | QUAD8_RLD_PRESET_PSC,
 	     base_offset + 1);
 
-	mutex_unlock(&priv->lock);
+	spin_unlock_irqrestore(&priv->lock, irqflags);
 
 	return 0;
 }
@@ -990,8 +1007,7 @@ static int quad8_probe(struct device *dev, unsigned int id)
 	priv->counter.priv = priv;
 	priv->base = base[id];
 
-	/* Initialize mutex */
-	mutex_init(&priv->lock);
+	spin_lock_init(&priv->lock);
 
 	/* Reset all counters and disable interrupt function */
 	outb(QUAD8_CHAN_OP_RESET_COUNTERS, base[id] + QUAD8_REG_CHAN_OP);
Signature · 1 line
2.30.2
#53 lore raw

PATCH v10 33/33 counter: 104-quad-8: Add IRQ support for the ACCES 104-QUAD-8

In reply to William Breathitt Gray

The LSI/CSI LS7266R1 chip provides programmable output via the FLG pins. When interrupts are enabled on the ACCES 104-QUAD-8, they occur whenever FLG1 is active. Four functions are available for the FLG1 signal: Carry, Compare, Carry-Borrow, and Index.

Carry:
Interrupt generated on active low Carry signal. Carry signal toggles every time the respective channel's counter overflows.

Compare:
Interrupt generated on active low Compare signal. Compare signal toggles every time respective channel's preset register is equal to the respective channel's counter.

Carry-Borrow:
Interrupt generated on active low Carry signal and active low Borrow signal. Carry signal toggles every time the respective channel's counter overflows. Borrow signal toggles every time the respective channel's counter underflows.

Index:
Interrupt generated on active high Index signal.

These four functions correspond respectivefly to the following four Counter event types: COUNTER_EVENT_OVERFLOW, COUNTER_EVENT_THRESHOLD, COUNTER_EVENT_OVERFLOW_UNDERFLOW, and COUNTER_EVENT_INDEX. Interrupts push Counter events to event channel X, where 'X' is the respective channel whose FLG1 activated.

This patch adds IRQ support for the ACCES 104-QUAD-8. The interrupt line numbers for the devices may be configured via the irq array module parameter.

---
 drivers/counter/104-quad-8.c | 167 +++++++++++++++++++++++++++++++++--
 drivers/counter/Kconfig      |   6 +-
 2 files changed, 164 insertions(+), 9 deletions(-)
drivers/counter/104-quad-8.c +161 -6
index d46b8101f207..09b0b0ba8fe7 100644
@@ -11,6 +11,7 @@
 #include <linux/errno.h>
 #include <linux/io.h>
 #include <linux/ioport.h>
+#include <linux/interrupt.h>
 #include <linux/isa.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
@@ -25,6 +26,10 @@ static unsigned int num_quad8;
 module_param_hw_array(base, uint, ioport, &num_quad8, 0);
 MODULE_PARM_DESC(base, "ACCES 104-QUAD-8 base addresses");
 
+static unsigned int irq[max_num_isa_dev(QUAD8_EXTENT)];
+module_param_hw_array(irq, uint, irq, NULL, 0);
+MODULE_PARM_DESC(irq, "ACCES 104-QUAD-8 interrupt line numbers");
+
 #define QUAD8_NUM_COUNTERS 8
 
 /**
@@ -38,6 +43,8 @@ MODULE_PARM_DESC(base, "ACCES 104-QUAD-8 base addresses");
  * @quadrature_scale:	array of quadrature mode scale configurations
  * @ab_enable:		array of A and B inputs enable configurations
  * @preset_enable:	array of set_to_preset_on_index attribute configurations
+ * @irq_trigger:	array of current IRQ trigger function configurations
+ * @next_irq_trigger:	array of next IRQ trigger function configurations
  * @synchronous_mode:	array of index function synchronous mode configurations
  * @index_polarity:	array of index function polarity configurations
  * @cable_fault_enable:	differential encoder cable status enable configurations
@@ -53,13 +60,17 @@ struct quad8 {
 	unsigned int quadrature_scale[QUAD8_NUM_COUNTERS];
 	unsigned int ab_enable[QUAD8_NUM_COUNTERS];
 	unsigned int preset_enable[QUAD8_NUM_COUNTERS];
+	unsigned int irq_trigger[QUAD8_NUM_COUNTERS];
+	unsigned int next_irq_trigger[QUAD8_NUM_COUNTERS];
 	unsigned int synchronous_mode[QUAD8_NUM_COUNTERS];
 	unsigned int index_polarity[QUAD8_NUM_COUNTERS];
 	unsigned int cable_fault_enable;
 	unsigned int base;
 };
 
+#define QUAD8_REG_INTERRUPT_STATUS 0x10
 #define QUAD8_REG_CHAN_OP 0x11
+#define QUAD8_REG_INDEX_INTERRUPT 0x12
 #define QUAD8_REG_INDEX_INPUT_LEVELS 0x16
 #define QUAD8_DIFF_ENCODER_CABLE_STATUS 0x17
 /* Borrow Toggle flip-flop */
@@ -92,8 +103,8 @@ struct quad8 {
 #define QUAD8_RLD_CNTR_OUT 0x10
 /* Transfer Preset Register LSB to FCK Prescaler */
 #define QUAD8_RLD_PRESET_PSC 0x18
-#define QUAD8_CHAN_OP_ENABLE_COUNTERS 0x00
 #define QUAD8_CHAN_OP_RESET_COUNTERS 0x01
+#define QUAD8_CHAN_OP_ENABLE_INTERRUPT_FUNC 0x04
 #define QUAD8_CMR_QUADRATURE_X1 0x08
 #define QUAD8_CMR_QUADRATURE_X2 0x10
 #define QUAD8_CMR_QUADRATURE_X4 0x18
@@ -378,13 +389,103 @@ static int quad8_action_read(struct counter_device *counter,
 	}
 }
 
+enum {
+	QUAD8_EVENT_NONE = -1,
+	QUAD8_EVENT_CARRY = 0,
+	QUAD8_EVENT_COMPARE = 1,
+	QUAD8_EVENT_CARRY_BORROW = 2,
+	QUAD8_EVENT_INDEX = 3,
+};
+
+static int quad8_events_configure(struct counter_device *counter)
+{
+	struct quad8 *const priv = counter->priv;
+	unsigned long irq_enabled = 0;
+	unsigned long irqflags;
+	size_t channel;
+	unsigned long ior_cfg;
+	unsigned long base_offset;
+
+	spin_lock_irqsave(&priv->lock, irqflags);
+
+	/* Enable interrupts for the requested channels, disable for the rest */
+	for (channel = 0; channel < QUAD8_NUM_COUNTERS; channel++) {
+		if (priv->next_irq_trigger[channel] == QUAD8_EVENT_NONE)
+			continue;
+
+		if (priv->irq_trigger[channel] != priv->next_irq_trigger[channel]) {
+			/* Save new IRQ function configuration */
+			priv->irq_trigger[channel] = priv->next_irq_trigger[channel];
+
+			/* Load configuration to I/O Control Register */
+			ior_cfg = priv->ab_enable[channel] |
+				  priv->preset_enable[channel] << 1 |
+				  priv->irq_trigger[channel] << 3;
+			base_offset = priv->base + 2 * channel + 1;
+			outb(QUAD8_CTR_IOR | ior_cfg, base_offset);
+		}
+
+		/* Reset next IRQ trigger function configuration */
+		priv->next_irq_trigger[channel] = QUAD8_EVENT_NONE;
+
+		/* Enable IRQ line */
+		irq_enabled |= BIT(channel);
+	}
+
+	outb(irq_enabled, priv->base + QUAD8_REG_INDEX_INTERRUPT);
+
+	spin_unlock_irqrestore(&priv->lock, irqflags);
+
+	return 0;
+}
+
+static int quad8_watch_validate(struct counter_device *counter,
+				const struct counter_watch *watch)
+{
+	struct quad8 *const priv = counter->priv;
+
+	if (watch->channel > QUAD8_NUM_COUNTERS - 1)
+		return -EINVAL;
+
+	switch (watch->event) {
+	case COUNTER_EVENT_OVERFLOW:
+		if (priv->next_irq_trigger[watch->channel] == QUAD8_EVENT_NONE)
+			priv->next_irq_trigger[watch->channel] = QUAD8_EVENT_CARRY;
+		else if (priv->next_irq_trigger[watch->channel] != QUAD8_EVENT_CARRY)
+			return -EINVAL;
+		return 0;
+	case COUNTER_EVENT_THRESHOLD:
+		if (priv->next_irq_trigger[watch->channel] == QUAD8_EVENT_NONE)
+			priv->next_irq_trigger[watch->channel] = QUAD8_EVENT_COMPARE;
+		else if (priv->next_irq_trigger[watch->channel] != QUAD8_EVENT_COMPARE)
+			return -EINVAL;
+		return 0;
+	case COUNTER_EVENT_OVERFLOW_UNDERFLOW:
+		if (priv->next_irq_trigger[watch->channel] == QUAD8_EVENT_NONE)
+			priv->next_irq_trigger[watch->channel] = QUAD8_EVENT_CARRY_BORROW;
+		else if (priv->next_irq_trigger[watch->channel] != QUAD8_EVENT_CARRY_BORROW)
+			return -EINVAL;
+		return 0;
+	case COUNTER_EVENT_INDEX:
+		if (priv->next_irq_trigger[watch->channel] == QUAD8_EVENT_NONE)
+			priv->next_irq_trigger[watch->channel] = QUAD8_EVENT_INDEX;
+		else if (priv->next_irq_trigger[watch->channel] != QUAD8_EVENT_INDEX)
+			return -EINVAL;
+		return 0;
+	default:
+		return -EINVAL;
+	}
+}
+
 static const struct counter_ops quad8_ops = {
 	.signal_read = quad8_signal_read,
 	.count_read = quad8_count_read,
 	.count_write = quad8_count_write,
 	.function_read = quad8_function_read,
 	.function_write = quad8_function_write,
-	.action_read = quad8_action_read
+	.action_read = quad8_action_read,
+	.events_configure = quad8_events_configure,
+	.watch_validate = quad8_watch_validate,
 };
 
 static const char *const quad8_index_polarity_modes[] = {
@@ -579,7 +680,8 @@ static int quad8_count_enable_write(struct counter_device *counter,
 
 	priv->ab_enable[count->id] = enable;
 
-	ior_cfg = enable | priv->preset_enable[count->id] << 1;
+	ior_cfg = enable | priv->preset_enable[count->id] << 1 |
+		  priv->irq_trigger[count->id] << 3;
 
 	/* Load I/O control configuration */
 	outb(QUAD8_CTR_IOR | ior_cfg, base_offset + 1);
@@ -728,7 +830,8 @@ static int quad8_count_preset_enable_write(struct counter_device *counter,
 
 	priv->preset_enable[count->id] = preset_enable;
 
-	ior_cfg = priv->ab_enable[count->id] | preset_enable << 1;
+	ior_cfg = priv->ab_enable[count->id] | preset_enable << 1 |
+		  priv->irq_trigger[count->id] << 3;
 
 	/* Load I/O control configuration to Input / Output Control Register */
 	outb(QUAD8_CTR_IOR | ior_cfg, base_offset);
@@ -980,11 +1083,54 @@ static struct counter_count quad8_counts[] = {
 	QUAD8_COUNT(7, "Channel 8 Count")
 };
 
+static irqreturn_t quad8_irq_handler(int irq, void *private)
+{
+	struct quad8 *const priv = private;
+	const unsigned long base = priv->base;
+	unsigned long irq_status;
+	unsigned long channel;
+	u8 event;
+
+	irq_status = inb(base + QUAD8_REG_INTERRUPT_STATUS);
+	if (!irq_status)
+		return IRQ_NONE;
+
+	for_each_set_bit(channel, &irq_status, QUAD8_NUM_COUNTERS) {
+		switch (priv->irq_trigger[channel]) {
+		case QUAD8_EVENT_CARRY:
+			event = COUNTER_EVENT_OVERFLOW;
+				break;
+		case QUAD8_EVENT_COMPARE:
+			event = COUNTER_EVENT_THRESHOLD;
+				break;
+		case QUAD8_EVENT_CARRY_BORROW:
+			event = COUNTER_EVENT_OVERFLOW_UNDERFLOW;
+				break;
+		case QUAD8_EVENT_INDEX:
+			event = COUNTER_EVENT_INDEX;
+				break;
+		default:
+			/* should never reach this path */
+			WARN_ONCE(true, "invalid interrupt trigger function %u configured for channel %lu\n",
+				  priv->irq_trigger[channel], channel);
+			continue;
+		}
+
+		counter_push_event(&priv->counter, event, channel);
+	}
+
+	/* Clear pending interrupts on device */
+	outb(QUAD8_CHAN_OP_ENABLE_INTERRUPT_FUNC, base + QUAD8_REG_CHAN_OP);
+
+	return IRQ_HANDLED;
+}
+
 static int quad8_probe(struct device *dev, unsigned int id)
 {
 	struct quad8 *priv;
 	int i, j;
 	unsigned int base_offset;
+	int err;
 
 	if (!devm_request_region(dev, base[id], QUAD8_EXTENT, dev_name(dev))) {
 		dev_err(dev, "Unable to lock port addresses (0x%X-0x%X)\n",
@@ -1009,6 +1155,8 @@ static int quad8_probe(struct device *dev, unsigned int id)
 
 	spin_lock_init(&priv->lock);
 
+	/* Reset Index/Interrupt Register */
+	outb(0x00, base[id] + QUAD8_REG_INDEX_INTERRUPT);
 	/* Reset all counters and disable interrupt function */
 	outb(QUAD8_CHAN_OP_RESET_COUNTERS, base[id] + QUAD8_REG_CHAN_OP);
 	/* Set initial configuration for all counters */
@@ -1035,11 +1183,18 @@ static int quad8_probe(struct device *dev, unsigned int id)
 		outb(QUAD8_CTR_IOR, base_offset + 1);
 		/* Disable index function; negative index polarity */
 		outb(QUAD8_CTR_IDR, base_offset + 1);
+		/* Initialize next IRQ trigger function configuration */
+		priv->next_irq_trigger[i] = QUAD8_EVENT_NONE;
 	}
 	/* Disable Differential Encoder Cable Status for all channels */
 	outb(0xFF, base[id] + QUAD8_DIFF_ENCODER_CABLE_STATUS);
-	/* Enable all counters */
-	outb(QUAD8_CHAN_OP_ENABLE_COUNTERS, base[id] + QUAD8_REG_CHAN_OP);
+	/* Enable all counters and enable interrupt function */
+	outb(QUAD8_CHAN_OP_ENABLE_INTERRUPT_FUNC, base[id] + QUAD8_REG_CHAN_OP);
+
+	err = devm_request_irq(dev, irq[id], quad8_irq_handler, IRQF_SHARED,
+			       priv->counter.name, priv);
+	if (err)
+		return err;
 
 	return devm_counter_register(dev, &priv->counter);
 }
drivers/counter/Kconfig +3 -3
index 5328705aa09c..2c2862dd46a5 100644
@@ -23,11 +23,11 @@ config 104_QUAD_8
 	  A counter's respective error flag may be cleared by performing a write
 	  operation on the respective count value attribute. Although the
 	  104-QUAD-8 counters have a 25-bit range, only the lower 24 bits may be
-	  set, either directly or via the counter's preset attribute. Interrupts
-	  are not supported by this driver.
+	  set, either directly or via the counter's preset attribute.
 
 	  The base port addresses for the devices may be configured via the base
-	  array module parameter.
+	  array module parameter. The interrupt line numbers for the devices may
+	  be configured via the irq array module parameter.
 
 config INTERRUPT_CNT
 	tristate "Interrupt counter driver"
Signature · 1 line
2.30.2
Acked-by on v10 33/33
#54 lore raw

Re: [PATCH v10 33/33] counter: 104-quad-8: Add IRQ support for the ACCES 104-QUAD-8

Quoted 36 lines · William Breathitt Gray

The LSI/CSI LS7266R1 chip provides programmable output via the FLG pins. When interrupts are enabled on the ACCES 104-QUAD-8, they occur whenever FLG1 is active. Four functions are available for the FLG1 signal: Carry, Compare, Carry-Borrow, and Index.

Carry:
Interrupt generated on active low Carry signal. Carry signal toggles every time the respective channel's counter overflows.

Compare:
Interrupt generated on active low Compare signal. Compare signal toggles every time respective channel's preset register is equal to the respective channel's counter.

Carry-Borrow:
Interrupt generated on active low Carry signal and active low Borrow signal. Carry signal toggles every time the respective channel's counter overflows. Borrow signal toggles every time the respective channel's counter underflows.

Index:
Interrupt generated on active high Index signal.

These four functions correspond respectivefly to the following four Counter event types: COUNTER_EVENT_OVERFLOW, COUNTER_EVENT_THRESHOLD, COUNTER_EVENT_OVERFLOW_UNDERFLOW, and COUNTER_EVENT_INDEX. Interrupts push Counter events to event channel X, where 'X' is the respective channel whose FLG1 activated.

This patch adds IRQ support for the ACCES 104-QUAD-8. The interrupt line numbers for the devices may be configured via the irq array module parameter.

Quoted 6 lines
---
 drivers/counter/104-quad-8.c | 167 +++++++++++++++++++++++++++++++++--
 drivers/counter/Kconfig      |   6 +-
 2 files changed, 164 insertions(+), 9 deletions(-)
Quoted 293 lines
drivers/counter/104-quad-8.c +161 -6
index d46b8101f207..09b0b0ba8fe7 100644
@@ -11,6 +11,7 @@
 #include <linux/errno.h>
 #include <linux/io.h>
 #include <linux/ioport.h>
+#include <linux/interrupt.h>
 #include <linux/isa.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
@@ -25,6 +26,10 @@ static unsigned int num_quad8;
 module_param_hw_array(base, uint, ioport, &num_quad8, 0);
 MODULE_PARM_DESC(base, "ACCES 104-QUAD-8 base addresses");
 
+static unsigned int irq[max_num_isa_dev(QUAD8_EXTENT)];
+module_param_hw_array(irq, uint, irq, NULL, 0);
+MODULE_PARM_DESC(irq, "ACCES 104-QUAD-8 interrupt line numbers");
+
 #define QUAD8_NUM_COUNTERS 8
 
 /**
@@ -38,6 +43,8 @@ MODULE_PARM_DESC(base, "ACCES 104-QUAD-8 base addresses");
  * @quadrature_scale:	array of quadrature mode scale configurations
  * @ab_enable:		array of A and B inputs enable configurations
  * @preset_enable:	array of set_to_preset_on_index attribute configurations
+ * @irq_trigger:	array of current IRQ trigger function configurations
+ * @next_irq_trigger:	array of next IRQ trigger function configurations
  * @synchronous_mode:	array of index function synchronous mode configurations
  * @index_polarity:	array of index function polarity configurations
  * @cable_fault_enable:	differential encoder cable status enable configurations
@@ -53,13 +60,17 @@ struct quad8 {
 	unsigned int quadrature_scale[QUAD8_NUM_COUNTERS];
 	unsigned int ab_enable[QUAD8_NUM_COUNTERS];
 	unsigned int preset_enable[QUAD8_NUM_COUNTERS];
+	unsigned int irq_trigger[QUAD8_NUM_COUNTERS];
+	unsigned int next_irq_trigger[QUAD8_NUM_COUNTERS];
 	unsigned int synchronous_mode[QUAD8_NUM_COUNTERS];
 	unsigned int index_polarity[QUAD8_NUM_COUNTERS];
 	unsigned int cable_fault_enable;
 	unsigned int base;
 };
 
+#define QUAD8_REG_INTERRUPT_STATUS 0x10
 #define QUAD8_REG_CHAN_OP 0x11
+#define QUAD8_REG_INDEX_INTERRUPT 0x12
 #define QUAD8_REG_INDEX_INPUT_LEVELS 0x16
 #define QUAD8_DIFF_ENCODER_CABLE_STATUS 0x17
 /* Borrow Toggle flip-flop */
@@ -92,8 +103,8 @@ struct quad8 {
 #define QUAD8_RLD_CNTR_OUT 0x10
 /* Transfer Preset Register LSB to FCK Prescaler */
 #define QUAD8_RLD_PRESET_PSC 0x18
-#define QUAD8_CHAN_OP_ENABLE_COUNTERS 0x00
 #define QUAD8_CHAN_OP_RESET_COUNTERS 0x01
+#define QUAD8_CHAN_OP_ENABLE_INTERRUPT_FUNC 0x04
 #define QUAD8_CMR_QUADRATURE_X1 0x08
 #define QUAD8_CMR_QUADRATURE_X2 0x10
 #define QUAD8_CMR_QUADRATURE_X4 0x18
@@ -378,13 +389,103 @@ static int quad8_action_read(struct counter_device *counter,
 	}
 }
 
+enum {
+	QUAD8_EVENT_NONE = -1,
+	QUAD8_EVENT_CARRY = 0,
+	QUAD8_EVENT_COMPARE = 1,
+	QUAD8_EVENT_CARRY_BORROW = 2,
+	QUAD8_EVENT_INDEX = 3,
+};
+
+static int quad8_events_configure(struct counter_device *counter)
+{
+	struct quad8 *const priv = counter->priv;
+	unsigned long irq_enabled = 0;
+	unsigned long irqflags;
+	size_t channel;
+	unsigned long ior_cfg;
+	unsigned long base_offset;
+
+	spin_lock_irqsave(&priv->lock, irqflags);
+
+	/* Enable interrupts for the requested channels, disable for the rest */
+	for (channel = 0; channel < QUAD8_NUM_COUNTERS; channel++) {
+		if (priv->next_irq_trigger[channel] == QUAD8_EVENT_NONE)
+			continue;
+
+		if (priv->irq_trigger[channel] != priv->next_irq_trigger[channel]) {
+			/* Save new IRQ function configuration */
+			priv->irq_trigger[channel] = priv->next_irq_trigger[channel];
+
+			/* Load configuration to I/O Control Register */
+			ior_cfg = priv->ab_enable[channel] |
+				  priv->preset_enable[channel] << 1 |
+				  priv->irq_trigger[channel] << 3;
+			base_offset = priv->base + 2 * channel + 1;
+			outb(QUAD8_CTR_IOR | ior_cfg, base_offset);
+		}
+
+		/* Reset next IRQ trigger function configuration */
+		priv->next_irq_trigger[channel] = QUAD8_EVENT_NONE;
+
+		/* Enable IRQ line */
+		irq_enabled |= BIT(channel);
+	}
+
+	outb(irq_enabled, priv->base + QUAD8_REG_INDEX_INTERRUPT);
+
+	spin_unlock_irqrestore(&priv->lock, irqflags);
+
+	return 0;
+}
+
+static int quad8_watch_validate(struct counter_device *counter,
+				const struct counter_watch *watch)
+{
+	struct quad8 *const priv = counter->priv;
+
+	if (watch->channel > QUAD8_NUM_COUNTERS - 1)
+		return -EINVAL;
+
+	switch (watch->event) {
+	case COUNTER_EVENT_OVERFLOW:
+		if (priv->next_irq_trigger[watch->channel] == QUAD8_EVENT_NONE)
+			priv->next_irq_trigger[watch->channel] = QUAD8_EVENT_CARRY;
+		else if (priv->next_irq_trigger[watch->channel] != QUAD8_EVENT_CARRY)
+			return -EINVAL;
+		return 0;
+	case COUNTER_EVENT_THRESHOLD:
+		if (priv->next_irq_trigger[watch->channel] == QUAD8_EVENT_NONE)
+			priv->next_irq_trigger[watch->channel] = QUAD8_EVENT_COMPARE;
+		else if (priv->next_irq_trigger[watch->channel] != QUAD8_EVENT_COMPARE)
+			return -EINVAL;
+		return 0;
+	case COUNTER_EVENT_OVERFLOW_UNDERFLOW:
+		if (priv->next_irq_trigger[watch->channel] == QUAD8_EVENT_NONE)
+			priv->next_irq_trigger[watch->channel] = QUAD8_EVENT_CARRY_BORROW;
+		else if (priv->next_irq_trigger[watch->channel] != QUAD8_EVENT_CARRY_BORROW)
+			return -EINVAL;
+		return 0;
+	case COUNTER_EVENT_INDEX:
+		if (priv->next_irq_trigger[watch->channel] == QUAD8_EVENT_NONE)
+			priv->next_irq_trigger[watch->channel] = QUAD8_EVENT_INDEX;
+		else if (priv->next_irq_trigger[watch->channel] != QUAD8_EVENT_INDEX)
+			return -EINVAL;
+		return 0;
+	default:
+		return -EINVAL;
+	}
+}
+
 static const struct counter_ops quad8_ops = {
 	.signal_read = quad8_signal_read,
 	.count_read = quad8_count_read,
 	.count_write = quad8_count_write,
 	.function_read = quad8_function_read,
 	.function_write = quad8_function_write,
-	.action_read = quad8_action_read
+	.action_read = quad8_action_read,
+	.events_configure = quad8_events_configure,
+	.watch_validate = quad8_watch_validate,
 };
 
 static const char *const quad8_index_polarity_modes[] = {
@@ -579,7 +680,8 @@ static int quad8_count_enable_write(struct counter_device *counter,
 
 	priv->ab_enable[count->id] = enable;
 
-	ior_cfg = enable | priv->preset_enable[count->id] << 1;
+	ior_cfg = enable | priv->preset_enable[count->id] << 1 |
+		  priv->irq_trigger[count->id] << 3;
 
 	/* Load I/O control configuration */
 	outb(QUAD8_CTR_IOR | ior_cfg, base_offset + 1);
@@ -728,7 +830,8 @@ static int quad8_count_preset_enable_write(struct counter_device *counter,
 
 	priv->preset_enable[count->id] = preset_enable;
 
-	ior_cfg = priv->ab_enable[count->id] | preset_enable << 1;
+	ior_cfg = priv->ab_enable[count->id] | preset_enable << 1 |
+		  priv->irq_trigger[count->id] << 3;
 
 	/* Load I/O control configuration to Input / Output Control Register */
 	outb(QUAD8_CTR_IOR | ior_cfg, base_offset);
@@ -980,11 +1083,54 @@ static struct counter_count quad8_counts[] = {
 	QUAD8_COUNT(7, "Channel 8 Count")
 };
 
+static irqreturn_t quad8_irq_handler(int irq, void *private)
+{
+	struct quad8 *const priv = private;
+	const unsigned long base = priv->base;
+	unsigned long irq_status;
+	unsigned long channel;
+	u8 event;
+
+	irq_status = inb(base + QUAD8_REG_INTERRUPT_STATUS);
+	if (!irq_status)
+		return IRQ_NONE;
+
+	for_each_set_bit(channel, &irq_status, QUAD8_NUM_COUNTERS) {
+		switch (priv->irq_trigger[channel]) {
+		case QUAD8_EVENT_CARRY:
+			event = COUNTER_EVENT_OVERFLOW;
+				break;
+		case QUAD8_EVENT_COMPARE:
+			event = COUNTER_EVENT_THRESHOLD;
+				break;
+		case QUAD8_EVENT_CARRY_BORROW:
+			event = COUNTER_EVENT_OVERFLOW_UNDERFLOW;
+				break;
+		case QUAD8_EVENT_INDEX:
+			event = COUNTER_EVENT_INDEX;
+				break;
+		default:
+			/* should never reach this path */
+			WARN_ONCE(true, "invalid interrupt trigger function %u configured for channel %lu\n",
+				  priv->irq_trigger[channel], channel);
+			continue;
+		}
+
+		counter_push_event(&priv->counter, event, channel);
+	}
+
+	/* Clear pending interrupts on device */
+	outb(QUAD8_CHAN_OP_ENABLE_INTERRUPT_FUNC, base + QUAD8_REG_CHAN_OP);
+
+	return IRQ_HANDLED;
+}
+
 static int quad8_probe(struct device *dev, unsigned int id)
 {
 	struct quad8 *priv;
 	int i, j;
 	unsigned int base_offset;
+	int err;
 
 	if (!devm_request_region(dev, base[id], QUAD8_EXTENT, dev_name(dev))) {
 		dev_err(dev, "Unable to lock port addresses (0x%X-0x%X)\n",
@@ -1009,6 +1155,8 @@ static int quad8_probe(struct device *dev, unsigned int id)
 
 	spin_lock_init(&priv->lock);
 
+	/* Reset Index/Interrupt Register */
+	outb(0x00, base[id] + QUAD8_REG_INDEX_INTERRUPT);
 	/* Reset all counters and disable interrupt function */
 	outb(QUAD8_CHAN_OP_RESET_COUNTERS, base[id] + QUAD8_REG_CHAN_OP);
 	/* Set initial configuration for all counters */
@@ -1035,11 +1183,18 @@ static int quad8_probe(struct device *dev, unsigned int id)
 		outb(QUAD8_CTR_IOR, base_offset + 1);
 		/* Disable index function; negative index polarity */
 		outb(QUAD8_CTR_IDR, base_offset + 1);
+		/* Initialize next IRQ trigger function configuration */
+		priv->next_irq_trigger[i] = QUAD8_EVENT_NONE;
 	}
 	/* Disable Differential Encoder Cable Status for all channels */
 	outb(0xFF, base[id] + QUAD8_DIFF_ENCODER_CABLE_STATUS);
-	/* Enable all counters */
-	outb(QUAD8_CHAN_OP_ENABLE_COUNTERS, base[id] + QUAD8_REG_CHAN_OP);
+	/* Enable all counters and enable interrupt function */
+	outb(QUAD8_CHAN_OP_ENABLE_INTERRUPT_FUNC, base[id] + QUAD8_REG_CHAN_OP);
+
+	err = devm_request_irq(dev, irq[id], quad8_irq_handler, IRQF_SHARED,
+			       priv->counter.name, priv);
+	if (err)
+		return err;
 
 	return devm_counter_register(dev, &priv->counter);
 }
drivers/counter/Kconfig +3 -3
index 5328705aa09c..2c2862dd46a5 100644
@@ -23,11 +23,11 @@ config 104_QUAD_8
 	  A counter's respective error flag may be cleared by performing a write
 	  operation on the respective count value attribute. Although the
 	  104-QUAD-8 counters have a 25-bit range, only the lower 24 bits may be
-	  set, either directly or via the counter's preset attribute. Interrupts
-	  are not supported by this driver.
+	  set, either directly or via the counter's preset attribute.
 
 	  The base port addresses for the devices may be configured via the base
-	  array module parameter.
+	  array module parameter. The interrupt line numbers for the devices may
+	  be configured via the irq array module parameter.
 
 config INTERRUPT_CNT
 	tristate "Interrupt counter driver"
Signature · 1 line
2.30.2