i2c: i801: Add support for Intel Alder Lake PCH-M
PATCH 1/1 i2c: i801: Add support for Intel Alder Lake PCH-M
Add PCI ID of SMBus controller on Intel Alder Lake PCH-M.
Signed-off-by Jarkko Nikula <[email protected]>
--- drivers/i2c/busses/i2c-i801.c | 4 ++++ 1 file changed, 4 insertions(+)
drivers/i2c/busses/i2c-i801.c +4 -0
@@ -74,6 +74,7 @@* Comet Lake-V (PCH) 0xa3a3 32 hard yes yes yes * Alder Lake-S (PCH) 0x7aa3 32 hard yes yes yes * Alder Lake-P (PCH) 0x51a3 32 hard yes yes yes +* Alder Lake-M (PCH) 0x54a3 32 hard yes yes yes * * Features supported by this driver: * Software PEC no
@@ -232,6 +233,7 @@#define PCI_DEVICE_ID_INTEL_ELKHART_LAKE_SMBUS 0x4b23#define PCI_DEVICE_ID_INTEL_JASPER_LAKE_SMBUS 0x4da3#define PCI_DEVICE_ID_INTEL_ALDER_LAKE_P_SMBUS 0x51a3 +#define PCI_DEVICE_ID_INTEL_ALDER_LAKE_M_SMBUS 0x54a3#define PCI_DEVICE_ID_INTEL_BROXTON_SMBUS 0x5ad4#define PCI_DEVICE_ID_INTEL_ALDER_LAKE_S_SMBUS 0x7aa3#define PCI_DEVICE_ID_INTEL_LYNXPOINT_SMBUS 0x8c22
@@ -1090,6 +1092,7 @@ static const struct pci_device_id i801_ids[] = { { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_JASPER_LAKE_SMBUS) }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ALDER_LAKE_S_SMBUS) }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ALDER_LAKE_P_SMBUS) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ALDER_LAKE_M_SMBUS) }, { 0, } };
@@ -1775,6 +1778,7 @@ static int i801_probe(struct pci_dev *dev, const struct pci_device_id *id)case PCI_DEVICE_ID_INTEL_EBG_SMBUS :case PCI_DEVICE_ID_INTEL_ALDER_LAKE_S_SMBUS :case PCI_DEVICE_ID_INTEL_ALDER_LAKE_P_SMBUS : +case PCI_DEVICE_ID_INTEL_ALDER_LAKE_M_SMBUS : priv->features |=FEATURE_BLOCK_PROC ; priv->features |=FEATURE_I2C_BLOCK_READ ; priv->features |=FEATURE_IRQ ;
Signature · 1 line
2.30.2
Quoted 3 lines · Jarkko Nikula
Add PCI ID of SMBus controller on Intel Alder Lake PCH-M.
Signed-off-by Jarkko Nikula <[email protected]>
I recall Jean was fine with me picking up trivial enablement patches. Applied to for-next, thanks!