5.4.115-rc1 review

This is the start of the stable review cycle for the 5.4.115 release. There are 20 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Wed, 28 Apr 2021 07:28:08 +0000. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.115-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <[email protected]>

    Linux 5.4.115-rc1

Mike Galbraith <[email protected]>
x86/crash: Fix crash_setup_memmap_entries() out-of-bounds access

John Paul Adrian Glaubitz <[email protected]>
ia64: tools: remove duplicate definition of ia64_mf() on ia64

Randy Dunlap <[email protected]>
ia64: fix discontig.c section mismatches

Randy Dunlap <[email protected]>
csky: change a Kconfig symbol name to fix e1000 build error

Wan Jiabing <[email protected]>
cavium/liquidio: Fix duplicate argument

Michael Brown <[email protected]>
xen-netback: Check for hotplug-status existence before watching

Vasily Gorbik <[email protected]>
s390/entry: save the caller of psw_idle

Phillip Potter <[email protected]>
net: geneve: check skb is large enough for IPv4/IPv6 header

Tony Lindgren <[email protected]>
ARM: dts: Fix swapped mmc order for omap3

Jiapeng Zhong <[email protected]>
HID: wacom: Assign boolean values to a bool variable

Jia-Ju Bai <[email protected]>
HID: alps: fix error return code in alps_input_configured()

Shou-Chieh Hsu <[email protected]>
HID: google: add don USB id

Leo Yan <[email protected]>
perf auxtrace: Fix potential NULL pointer dereference

Jim Mattson <[email protected]>

    perf/x86/kvm: Fix Broadwell Xeon stepping in isolation_ucodes[]

Kan Liang <[email protected]>
perf/x86/intel/uncore: Remove uncore extra PCI dev HSWEP_PCI_PCU_3

Ali Saidi <[email protected]>
locking/qrwlock: Fix ordering in queued_write_lock_slowpath()

Andre Przywara <[email protected]>
arm64: dts: allwinner: Revert SD card CD GPIO for Pine64-LTS

Yuanyuan Zhong <[email protected]>
pinctrl: lewisburg: Update number of pins in community

Tony Lindgren <[email protected]>
gpio: omap: Save and restore sysconfig

Sven Schnelle <[email protected]>
s390/ptrace: return -ENOSYS when invalid syscall is supplied

-------------

Diffstat:

 Makefile                                           |  4 +-
 arch/arm/boot/dts/omap3.dtsi                       |  3 ++
 .../boot/dts/allwinner/sun50i-a64-pine64-lts.dts   |  2 +-
 arch/csky/Kconfig                                  |  2 +-
 arch/csky/include/asm/page.h                       |  2 +-
 arch/ia64/mm/discontig.c                           |  6 +--
 arch/s390/kernel/entry.S                           |  1 +
 arch/s390/kernel/ptrace.c                          | 17 ++++--
 arch/x86/events/intel/core.c                       |  2 +-
 arch/x86/events/intel/uncore_snbep.c               | 61 +++++++++-------------
 arch/x86/kernel/crash.c                            |  2 +-
 drivers/gpio/gpio-omap.c                           |  9 ++++
 drivers/hid/hid-alps.c                             |  1 +
 drivers/hid/hid-google-hammer.c                    |  2 +
 drivers/hid/hid-ids.h                              |  1 +
 drivers/hid/wacom_wac.c                            |  2 +-
 drivers/net/ethernet/cavium/liquidio/cn66xx_regs.h |  2 +-
 drivers/net/geneve.c                               |  6 +++
 drivers/net/xen-netback/xenbus.c                   | 12 +++--
 drivers/pinctrl/intel/pinctrl-lewisburg.c          |  6 +--
 include/linux/platform_data/gpio-omap.h            |  3 ++
 kernel/locking/qrwlock.c                           |  7 +--
 tools/arch/ia64/include/asm/barrier.h              |  3 --
 tools/perf/util/auxtrace.c                         |  2 +-
 24 files changed, 92 insertions(+), 66 deletions(-)

From: Sven Schnelle <[email protected]>

commit cd29fa798001075a554b978df3a64e6656c25794 upstream.

The current code returns the syscall number which an invalid syscall number is supplied and tracing is enabled. This makes the strace testsuite fail.

[krzysztof: adjusted the backport around missing ifdef CONFIG_SECCOMP,
add Link and Fixes; apparently this should go with the referenced commit]

---
 arch/s390/kernel/ptrace.c |   17 ++++++++++++-----
 1 file changed, 12 insertions(+), 5 deletions(-)

@@ -867,6 +867,7 @@ long compat_arch_ptrace(struct task_stru
 asmlinkage long do_syscall_trace_enter(struct pt_regs *regs)
 {
 	unsigned long mask = -1UL;
+	long ret = -1;
 
 	/*
 	 * The sysc_tracesys code in entry.S stored the system

@@ -878,27 +879,33 @@ asmlinkage long do_syscall_trace_enter(s
 		 * Tracing decided this syscall should not happen. Skip
 		 * the system call and the system call restart handling.
 		 */
-		clear_pt_regs_flag(regs, PIF_SYSCALL);
-		return -1;
+		goto skip;
 	}
 
 	/* Do the secure computing check after ptrace. */
 	if (secure_computing(NULL)) {
 		/* seccomp failures shouldn't expose any additional code. */
-		return -1;
+		goto skip;
 	}
 
 	if (unlikely(test_thread_flag(TIF_SYSCALL_TRACEPOINT)))
-		trace_sys_enter(regs, regs->gprs[2]);
+		trace_sys_enter(regs, regs->int_code & 0xffff);
 
 	if (is_compat_task())
 		mask = 0xffffffff;
 
-	audit_syscall_entry(regs->gprs[2], regs->orig_gpr2 & mask,
+	audit_syscall_entry(regs->int_code & 0xffff, regs->orig_gpr2 & mask,
 			    regs->gprs[3] &mask, regs->gprs[4] &mask,
 			    regs->gprs[5] &mask);
 
+	if ((signed long)regs->gprs[2] >= NR_syscalls) {
+		regs->gprs[2] = -ENOSYS;
+		ret = -ENOSYS;
+	}
 	return regs->gprs[2];
+skip:
+	clear_pt_regs_flag(regs, PIF_SYSCALL);
+	return ret;
 }
 
 asmlinkage void do_syscall_trace_exit(struct pt_regs *regs)

From: Tony Lindgren <[email protected]>

[ Upstream commit ddd8d94ca31e768c76cf8bfe34ba7b10136b3694 ]

As we are using cpu_pm to save and restore context, we must also save and restore the GPIO sysconfig register. This is needed because we are not calling PM runtime functions at all with cpu_pm.

We need to save the sysconfig on idle as it's value can get reconfigured by PM runtime and can be different from the init time value. Device specific flags like "ti,no-idle-on-init" can affect the init value.

---
 drivers/gpio/gpio-omap.c                | 9 +++++++++
 include/linux/platform_data/gpio-omap.h | 3 +++
 2 files changed, 12 insertions(+)

index d0f27084a942..ce6954390cfd 100644
@@ -29,6 +29,7 @@
 #define OMAP4_GPIO_DEBOUNCINGTIME_MASK 0xFF
 
 struct gpio_regs {
+	u32 sysconfig;
 	u32 irqenable1;
 	u32 irqenable2;
 	u32 wake_en;

@@ -1058,6 +1059,7 @@ static void omap_gpio_init_context(struct gpio_bank *p)
 	const struct omap_gpio_reg_offs *regs = p->regs;
 	void __iomem *base = p->base;
 
+	p->context.sysconfig	= readl_relaxed(base + regs->sysconfig);
 	p->context.ctrl		= readl_relaxed(base + regs->ctrl);
 	p->context.oe		= readl_relaxed(base + regs->direction);
 	p->context.wake_en	= readl_relaxed(base + regs->wkup_en);

@@ -1077,6 +1079,7 @@ static void omap_gpio_restore_context(struct gpio_bank *bank)
 	const struct omap_gpio_reg_offs *regs = bank->regs;
 	void __iomem *base = bank->base;
 
+	writel_relaxed(bank->context.sysconfig, base + regs->sysconfig);
 	writel_relaxed(bank->context.wake_en, base + regs->wkup_en);
 	writel_relaxed(bank->context.ctrl, base + regs->ctrl);
 	writel_relaxed(bank->context.leveldetect0, base + regs->leveldetect0);

@@ -1104,6 +1107,10 @@ static void omap_gpio_idle(struct gpio_bank *bank, bool may_lose_context)
 
 	bank->saved_datain = readl_relaxed(base + bank->regs->datain);
 
+	/* Save syconfig, it's runtime value can be different from init value */
+	if (bank->loses_context)
+		bank->context.sysconfig = readl_relaxed(base + bank->regs->sysconfig);
+
 	if (!bank->enabled_non_wakeup_gpios)
 		goto update_gpio_context_count;
 

@@ -1259,6 +1266,7 @@ static int gpio_omap_cpu_notifier(struct notifier_block *nb,
 
 static const struct omap_gpio_reg_offs omap2_gpio_regs = {
 	.revision =		OMAP24XX_GPIO_REVISION,
+	.sysconfig =		OMAP24XX_GPIO_SYSCONFIG,
 	.direction =		OMAP24XX_GPIO_OE,
 	.datain =		OMAP24XX_GPIO_DATAIN,
 	.dataout =		OMAP24XX_GPIO_DATAOUT,

@@ -1282,6 +1290,7 @@ static const struct omap_gpio_reg_offs omap2_gpio_regs = {
 
 static const struct omap_gpio_reg_offs omap4_gpio_regs = {
 	.revision =		OMAP4_GPIO_REVISION,
+	.sysconfig =		OMAP4_GPIO_SYSCONFIG,
 	.direction =		OMAP4_GPIO_OE,
 	.datain =		OMAP4_GPIO_DATAIN,
 	.dataout =		OMAP4_GPIO_DATAOUT,

index 8b30b14b47d3..f377817ce75c 100644
@@ -85,6 +85,7 @@
  * omap2+ specific GPIO registers
  */
 #define OMAP24XX_GPIO_REVISION		0x0000
+#define OMAP24XX_GPIO_SYSCONFIG		0x0010
 #define OMAP24XX_GPIO_IRQSTATUS1	0x0018
 #define OMAP24XX_GPIO_IRQSTATUS2	0x0028
 #define OMAP24XX_GPIO_IRQENABLE2	0x002c

@@ -108,6 +109,7 @@
 #define OMAP24XX_GPIO_SETDATAOUT	0x0094
 
 #define OMAP4_GPIO_REVISION		0x0000
+#define OMAP4_GPIO_SYSCONFIG		0x0010
 #define OMAP4_GPIO_EOI			0x0020
 #define OMAP4_GPIO_IRQSTATUSRAW0	0x0024
 #define OMAP4_GPIO_IRQSTATUSRAW1	0x0028

@@ -148,6 +150,7 @@
 #ifndef __ASSEMBLER__
 struct omap_gpio_reg_offs {
 	u16 revision;
+	u16 sysconfig;
 	u16 direction;
 	u16 datain;
 	u16 dataout;

2.30.2

From: Yuanyuan Zhong <[email protected]>

[ Upstream commit 196d941753297d0ca73c563ccd7d00be049ec226 ]

When updating pin names for Intel Lewisburg, the numbers of pins were left behind. Update them accordingly.

---
 drivers/pinctrl/intel/pinctrl-lewisburg.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

index 7fdf4257df1e..ad4b446d588e 100644
@@ -299,9 +299,9 @@ static const struct pinctrl_pin_desc lbg_pins[] = {
 static const struct intel_community lbg_communities[] = {
 	LBG_COMMUNITY(0, 0, 71),
 	LBG_COMMUNITY(1, 72, 132),
-	LBG_COMMUNITY(3, 133, 144),
-	LBG_COMMUNITY(4, 145, 180),
-	LBG_COMMUNITY(5, 181, 246),
+	LBG_COMMUNITY(3, 133, 143),
+	LBG_COMMUNITY(4, 144, 178),
+	LBG_COMMUNITY(5, 179, 246),
 };
 
 static const struct intel_pinctrl_soc_data lbg_soc_data = {

2.30.2

From: Andre Przywara <[email protected]>

[ Upstream commit 4d09ccc4a81e7de6b002482af554d8b5626f5041 ]

Commit 941432d00768 ("arm64: dts: allwinner: Drop non-removable from SoPine/LTS SD card") enabled the card detect GPIO for the SOPine module, along the way with the Pine64-LTS, which share the same base .dtsi.

This was based on the observation that the Pine64-LTS has as "push-push" SD card socket, and that the schematic mentions the card detect GPIO.

After having received two reports about failing SD card access with that patch, some more research and polls on that subject revealed that there are at least two different versions of the Pine64-LTS out there:
- On some boards (including mine) the card detect pin is "stuck" at high, regardless of an microSD card being inserted or not.
- On other boards the card-detect is working, but is active-high, by virtue of an explicit inverter circuit, as shown in the schematic.

To cover all versions of the board out there, and don't take any chances, let's revert the introduction of the active-low CD GPIO, but let's use the broken-cd property for the Pine64-LTS this time. That should avoid regressions and should work for everyone, even allowing SD card changes now.
The SOPine card detect has proven to be working, so let's keep that GPIO in place.

---
 arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-lts.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

index 8d15164f2a3c..7eb252adf9f0 100644
@@ -13,5 +13,5 @@
 };
 
 &mmc0 {
-	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 push-push switch */
+	broken-cd;		/* card detect is broken on *some* boards */
 };

2.30.2

From: Ali Saidi <[email protected]>

[ Upstream commit 84a24bf8c52e66b7ac89ada5e3cfbe72d65c1896 ]

While this code is executed with the wait_lock held, a reader can acquire the lock without holding wait_lock. The writer side loops checking the value with the atomic_cond_read_acquire(), but only truly acquires the lock when the compare-and-exchange is completed successfully which isn’t ordered. This exposes the window between the acquire and the cmpxchg to an A-B-A problem which allows reads following the lock acquisition to observe values speculatively before the write lock is truly acquired.

We've seen a problem in epoll where the reader does a xchg while holding the read lock, but the writer can see a value change out from under it.

Writer | Reader
--------------------------------------------------------------------------------

  ep_scan_ready_list()                  |
  |- write_lock_irq()                   |
      |- queued_write_lock_slowpath()   |
	|- atomic_cond_read_acquire()   |
				        | read_lock_irqsave(&ep->lock, flags);
     --> (observes value before unlock) |  chain_epi_lockless()
     |                                  |    epi->next = xchg(&ep->ovflist, epi);
     |                                  | read_unlock_irqrestore(&ep->lock, flags);
     |                                  |
     |     atomic_cmpxchg_relaxed()     |
     |-- READ_ONCE(ep->ovflist);        |

A core can order the read of the ovflist ahead of the atomic_cmpxchg_relaxed(). Switching the cmpxchg to use acquire semantics addresses this issue at which point the atomic_cond_read can be switched to use relaxed semantics.

---
 kernel/locking/qrwlock.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

index fe9ca92faa2a..909b0bf22a1e 100644
@@ -61,6 +61,8 @@ EXPORT_SYMBOL(queued_read_lock_slowpath);
  */
 void queued_write_lock_slowpath(struct qrwlock *lock)
 {
+	int cnts;
+
 	/* Put the writer into the wait queue */
 	arch_spin_lock(&lock->wait_lock);
 

@@ -74,9 +76,8 @@ void queued_write_lock_slowpath(struct qrwlock *lock)
 
 	/* When no more readers or writers, set the locked flag */
 	do {
-		atomic_cond_read_acquire(&lock->cnts, VAL == _QW_WAITING);
-	} while (atomic_cmpxchg_relaxed(&lock->cnts, _QW_WAITING,
-					_QW_LOCKED) != _QW_WAITING);
+		cnts = atomic_cond_read_relaxed(&lock->cnts, VAL == _QW_WAITING);
+	} while (!atomic_try_cmpxchg_acquire(&lock->cnts, &cnts, _QW_LOCKED));
 unlock:
 	arch_spin_unlock(&lock->wait_lock);
 }

2.30.2

From: Kan Liang <[email protected]>

[ Upstream commit 9d480158ee86ad606d3a8baaf81e6b71acbfd7d5 ]

There may be a kernel panic on the Haswell server and the Broadwell server, if the snbep_pci2phy_map_init() return error.

The uncore_extra_pci_dev[HSWEP_PCI_PCU_3] is used in the cpu_init() to detect the existence of the SBOX, which is a MSR type of PMON unit. The uncore_extra_pci_dev is allocated in the uncore_pci_init(). If the snbep_pci2phy_map_init() returns error, perf doesn't initialize the PCI type of the PMON units, so the uncore_extra_pci_dev will not be allocated. But perf may continue initializing the MSR type of PMON units. A null dereference kernel panic will be triggered.

The sockets in a Haswell server or a Broadwell server are identical. Only need to detect the existence of the SBOX once.
Current perf probes all available PCU devices and stores them into the uncore_extra_pci_dev. It's unnecessary.
Use the pci_get_device() to replace the uncore_extra_pci_dev. Only detect the existence of the SBOX on the first available PCU device once.

Factor out hswep_has_limit_sbox(), since the Haswell server and the Broadwell server uses the same way to detect the existence of the SBOX.

Add some macros to replace the magic number.

---
 arch/x86/events/intel/uncore_snbep.c | 61 ++++++++++++----------------
 1 file changed, 26 insertions(+), 35 deletions(-)

index ad20220af303..40751af62dd3 100644
@@ -1093,7 +1093,6 @@ enum {
 	SNBEP_PCI_QPI_PORT0_FILTER,
 	SNBEP_PCI_QPI_PORT1_FILTER,
 	BDX_PCI_QPI_PORT2_FILTER,
-	HSWEP_PCI_PCU_3,
 };
 
 static int snbep_qpi_hw_config(struct intel_uncore_box *box, struct perf_event *event)

@@ -2750,22 +2749,33 @@ static struct intel_uncore_type *hswep_msr_uncores[] = {
 	NULL,
 };
 
-void hswep_uncore_cpu_init(void)
+#define HSWEP_PCU_DID			0x2fc0
+#define HSWEP_PCU_CAPID4_OFFET		0x94
+#define hswep_get_chop(_cap)		(((_cap) >> 6) & 0x3)
+
+static bool hswep_has_limit_sbox(unsigned int device)
 {
-	int pkg = boot_cpu_data.logical_proc_id;
+	struct pci_dev *dev = pci_get_device(PCI_VENDOR_ID_INTEL, device, NULL);
+	u32 capid4;
+
+	if (!dev)
+		return false;
+
+	pci_read_config_dword(dev, HSWEP_PCU_CAPID4_OFFET, &capid4);
+	if (!hswep_get_chop(capid4))
+		return true;
 
+	return false;
+}
+
+void hswep_uncore_cpu_init(void)
+{
 	if (hswep_uncore_cbox.num_boxes > boot_cpu_data.x86_max_cores)
 		hswep_uncore_cbox.num_boxes = boot_cpu_data.x86_max_cores;
 
 	/* Detect 6-8 core systems with only two SBOXes */
-	if (uncore_extra_pci_dev[pkg].dev[HSWEP_PCI_PCU_3]) {
-		u32 capid4;
-
-		pci_read_config_dword(uncore_extra_pci_dev[pkg].dev[HSWEP_PCI_PCU_3],
-				      0x94, &capid4);
-		if (((capid4 >> 6) & 0x3) == 0)
-			hswep_uncore_sbox.num_boxes = 2;
-	}
+	if (hswep_has_limit_sbox(HSWEP_PCU_DID))
+		hswep_uncore_sbox.num_boxes = 2;
 
 	uncore_msr_uncores = hswep_msr_uncores;
 }

@@ -3028,11 +3038,6 @@ static const struct pci_device_id hswep_uncore_pci_ids[] = {
 		.driver_data = UNCORE_PCI_DEV_DATA(UNCORE_EXTRA_PCI_DEV,
 						   SNBEP_PCI_QPI_PORT1_FILTER),
 	},
-	{ /* PCU.3 (for Capability registers) */
-		PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x2fc0),
-		.driver_data = UNCORE_PCI_DEV_DATA(UNCORE_EXTRA_PCI_DEV,
-						   HSWEP_PCI_PCU_3),
-	},
 	{ /* end: all zeroes */ }
 };
 

@@ -3124,27 +3129,18 @@ static struct event_constraint bdx_uncore_pcu_constraints[] = {
 	EVENT_CONSTRAINT_END
 };
 
+#define BDX_PCU_DID			0x6fc0
+
 void bdx_uncore_cpu_init(void)
 {
-	int pkg = topology_phys_to_logical_pkg(boot_cpu_data.phys_proc_id);
-
 	if (bdx_uncore_cbox.num_boxes > boot_cpu_data.x86_max_cores)
 		bdx_uncore_cbox.num_boxes = boot_cpu_data.x86_max_cores;
 	uncore_msr_uncores = bdx_msr_uncores;
 
-	/* BDX-DE doesn't have SBOX */
-	if (boot_cpu_data.x86_model == 86) {
-		uncore_msr_uncores[BDX_MSR_UNCORE_SBOX] = NULL;
 	/* Detect systems with no SBOXes */
-	} else if (uncore_extra_pci_dev[pkg].dev[HSWEP_PCI_PCU_3]) {
-		struct pci_dev *pdev;
-		u32 capid4;
-
-		pdev = uncore_extra_pci_dev[pkg].dev[HSWEP_PCI_PCU_3];
-		pci_read_config_dword(pdev, 0x94, &capid4);
-		if (((capid4 >> 6) & 0x3) == 0)
-			bdx_msr_uncores[BDX_MSR_UNCORE_SBOX] = NULL;
-	}
+	if ((boot_cpu_data.x86_model == 86) || hswep_has_limit_sbox(BDX_PCU_DID))
+		uncore_msr_uncores[BDX_MSR_UNCORE_SBOX] = NULL;
+
 	hswep_uncore_pcu.constraints = bdx_uncore_pcu_constraints;
 }
 

@@ -3365,11 +3361,6 @@ static const struct pci_device_id bdx_uncore_pci_ids[] = {
 		.driver_data = UNCORE_PCI_DEV_DATA(UNCORE_EXTRA_PCI_DEV,
 						   BDX_PCI_QPI_PORT2_FILTER),
 	},
-	{ /* PCU.3 (for Capability registers) */
-		PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x6fc0),
-		.driver_data = UNCORE_PCI_DEV_DATA(UNCORE_EXTRA_PCI_DEV,
-						   HSWEP_PCI_PCU_3),
-	},
 	{ /* end: all zeroes */ }
 };
 

2.30.2

From: Jim Mattson <[email protected]>

[ Upstream commit 4b2f1e59229b9da319d358828cdfa4ddbc140769 ]

The only stepping of Broadwell Xeon parts is stepping 1. Fix the relevant isolation_ucodes[] entry, which previously enumerated stepping 2.

Although the original commit was characterized as an optimization, it is also a workaround for a correctness issue.

If a PMI arrives between kvm's call to perf_guest_get_msrs() and the subsequent VM-entry, a stale value for the IA32_PEBS_ENABLE MSR may be restored at the next VM-exit. This is because, unbeknownst to kvm, PMI throttling may clear bits in the IA32_PEBS_ENABLE MSR. CPUs with "PEBS isolation" don't suffer from this issue, because perf_guest_get_msrs() doesn't report the IA32_PEBS_ENABLE value.

---
 arch/x86/events/intel/core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

index 90760393a964..9cb3266e148d 100644
@@ -3999,7 +3999,7 @@ static const struct x86_cpu_desc isolation_ucodes[] = {
 	INTEL_CPU_DESC(INTEL_FAM6_BROADWELL_D,		 3, 0x07000009),
 	INTEL_CPU_DESC(INTEL_FAM6_BROADWELL_D,		 4, 0x0f000009),
 	INTEL_CPU_DESC(INTEL_FAM6_BROADWELL_D,		 5, 0x0e000002),
-	INTEL_CPU_DESC(INTEL_FAM6_BROADWELL_X,		 2, 0x0b000014),
+	INTEL_CPU_DESC(INTEL_FAM6_BROADWELL_X,		 1, 0x0b000014),
 	INTEL_CPU_DESC(INTEL_FAM6_SKYLAKE_X,		 3, 0x00000021),
 	INTEL_CPU_DESC(INTEL_FAM6_SKYLAKE_X,		 4, 0x00000000),
 	INTEL_CPU_DESC(INTEL_FAM6_SKYLAKE_X,		 5, 0x00000000),

2.30.2

From: Leo Yan <[email protected]>

[ Upstream commit b14585d9f18dc617e975815570fe836be656b1da ]

In the function auxtrace_parse_snapshot_options(), the callback pointer "itr->parse_snapshot_options" can be NULL if it has not been set during the AUX record initialization. This can cause tool crashing if the callback pointer "itr->parse_snapshot_options" is dereferenced without performing NULL check.

Add a NULL check for the pointer "itr->parse_snapshot_options" before invoke the callback.

---
 tools/perf/util/auxtrace.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

index 61b8dc45428f..ae5b97427192 100644
@@ -586,7 +586,7 @@ int auxtrace_parse_snapshot_options(struct auxtrace_record *itr,
 		break;
 	}
 
-	if (itr)
+	if (itr && itr->parse_snapshot_options)
 		return itr->parse_snapshot_options(itr, opts, str);
 
 	pr_err("No AUX area tracing to snapshot\n");

2.30.2

From: Shou-Chieh Hsu <[email protected]>

[ Upstream commit 36b87cf302a4f13f8b4344bcf98f67405a145e2f ]

Add 1 additional hammer-like device.

---
 drivers/hid/hid-google-hammer.c | 2 ++
 drivers/hid/hid-ids.h           | 1 +
 2 files changed, 3 insertions(+)

index aeb351658ad3..505ed76a830e 100644
@@ -467,6 +467,8 @@ static int hammer_probe(struct hid_device *hdev,
 
 
 static const struct hid_device_id hammer_devices[] = {
+	{ HID_DEVICE(BUS_USB, HID_GROUP_GENERIC,
+		     USB_VENDOR_ID_GOOGLE, USB_DEVICE_ID_GOOGLE_DON) },
 	{ HID_DEVICE(BUS_USB, HID_GROUP_GENERIC,
 		     USB_VENDOR_ID_GOOGLE, USB_DEVICE_ID_GOOGLE_HAMMER) },
 	{ HID_DEVICE(BUS_USB, HID_GROUP_GENERIC,

index d004f5645b30..d9e8105045a6 100644
@@ -488,6 +488,7 @@
 #define USB_DEVICE_ID_GOOGLE_MASTERBALL	0x503c
 #define USB_DEVICE_ID_GOOGLE_MAGNEMITE	0x503d
 #define USB_DEVICE_ID_GOOGLE_MOONBALL	0x5044
+#define USB_DEVICE_ID_GOOGLE_DON	0x5050
 
 #define USB_VENDOR_ID_GOTOP		0x08f2
 #define USB_DEVICE_ID_SUPER_Q2		0x007f

2.30.2

From: Jia-Ju Bai <[email protected]>

[ Upstream commit fa8ba6e5dc0e78e409e503ddcfceef5dd96527f4 ]

When input_register_device() fails, no error return code is assigned. To fix this bug, ret is assigned with -ENOENT as error return code.

---
 drivers/hid/hid-alps.c | 1 +
 1 file changed, 1 insertion(+)

index d33f5abc8f64..2477b2a3f7c3 100644
@@ -762,6 +762,7 @@ static int alps_input_configured(struct hid_device *hdev, struct hid_input *hi)
 
 		if (input_register_device(data->input2)) {
 			input_free_device(input2);
+			ret = -ENOENT;
 			goto exit;
 		}
 	}

2.30.2

From: Jiapeng Zhong <[email protected]>

[ Upstream commit e29c62ffb008829dc8bcc0a2ec438adc25a8255e ]

Fix the following coccicheck warnings:

./drivers/hid/wacom_wac.c:2536:2-6: WARNING: Assignment of 0/1 to bool variable.

---
 drivers/hid/wacom_wac.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

index bf0621e44619..b21cf764afc0 100644
@@ -2533,7 +2533,7 @@ static void wacom_wac_finger_slot(struct wacom_wac *wacom_wac,
 	    !wacom_wac->shared->is_touch_on) {
 		if (!wacom_wac->shared->touch_down)
 			return;
-		prox = 0;
+		prox = false;
 	}
 
 	wacom_wac->hid_data.num_received++;

2.30.2

From: Tony Lindgren <[email protected]>

[ Upstream commit a1ebdb3741993f853865d1bd8f77881916ad53a7 ]

Also some omap3 devices like n900 seem to have eMMC and micro-sd swapped around with commit 21b2cec61c04 ("mmc: Set PROBE_PREFER_ASYNCHRONOUS for drivers that existed in v4.4").

Let's fix the issue with aliases as discussed on the mailing lists. While the mmc aliases should be board specific, let's first fix the issue with minimal changes.

---
 arch/arm/boot/dts/omap3.dtsi | 3 +++
 1 file changed, 3 insertions(+)

index 4043ecb38016..0c8fcfb292bf 100644
@@ -23,6 +23,9 @@
 		i2c0 = &i2c1;
 		i2c1 = &i2c2;
 		i2c2 = &i2c3;
+		mmc0 = &mmc1;
+		mmc1 = &mmc2;
+		mmc2 = &mmc3;
 		serial0 = &uart1;
 		serial1 = &uart2;
 		serial2 = &uart3;

2.30.2

From: Phillip Potter <[email protected]>

[ Upstream commit 6628ddfec7580882f11fdc5c194a8ea781fdadfa ]

Check within geneve_xmit_skb/geneve6_xmit_skb that sk_buff structure is large enough to include IPv4 or IPv6 header, and reject if not. The geneve_xmit_skb portion and overall idea was contributed by Eric Dumazet. Fixes a KMSAN-found uninit-value bug reported by syzbot at:
https://syzkaller.appspot.com/bug?id=abe95dc3e3e9667fc23b8d81f29ecad95c6f106f

---
 drivers/net/geneve.c | 6 ++++++
 1 file changed, 6 insertions(+)

index c7ec3d24eabc..c33a08d65208 100644
@@ -891,6 +891,9 @@ static int geneve_xmit_skb(struct sk_buff *skb, struct net_device *dev,
 	__be16 sport;
 	int err;
 
+	if (!pskb_network_may_pull(skb, sizeof(struct iphdr)))
+		return -EINVAL;
+
 	sport = udp_flow_src_port(geneve->net, skb, 1, USHRT_MAX, true);
 	rt = geneve_get_v4_rt(skb, dev, gs4, &fl4, info,
 			      geneve->info.key.tp_dst, sport);

@@ -954,6 +957,9 @@ static int geneve6_xmit_skb(struct sk_buff *skb, struct net_device *dev,
 	__be16 sport;
 	int err;
 
+	if (!pskb_network_may_pull(skb, sizeof(struct ipv6hdr)))
+		return -EINVAL;
+
 	sport = udp_flow_src_port(geneve->net, skb, 1, USHRT_MAX, true);
 	dst = geneve_get_v6_dst(skb, dev, gs6, &fl6, info,
 				geneve->info.key.tp_dst, sport);

2.30.2

From: Vasily Gorbik <[email protected]>

[ Upstream commit a994eddb947ea9ebb7b14d9a1267001699f0a136 ]

Currently psw_idle does not allocate a stack frame and does not save its r14 and r15 into the save area. Even though this is valid from call ABI point of view, because psw_idle does not make any calls explicitly, in reality psw_idle is an entry point for controlled transition into serving interrupts. So, in practice, psw_idle stack frame is analyzed during stack unwinding. Depending on build options that r14 slot in the save area of psw_idle might either contain a value saved by previous sibling call or complete garbage.

[task 0000038000003c28] do_ext_irq+0xd6/0x160
[task 0000038000003c78] ext_int_handler+0xba/0xe8
[task *0000038000003dd8] psw_idle_exit+0x0/0x8 <-- pt_regs

 ([task    0000038000003dd8] 0x0)
  [task    0000038000003e10] default_idle_call+0x42/0x148
  [task    0000038000003e30] do_idle+0xce/0x160
  [task    0000038000003e70] cpu_startup_entry+0x36/0x40
  [task    0000038000003ea0] arch_call_rest_init+0x76/0x80

So, to make a stacktrace nicer and actually point for the real caller of psw_idle in this frequently occurring case, make psw_idle save its r14.

[task 0000038000003c28] do_ext_irq+0xd6/0x160
[task 0000038000003c78] ext_int_handler+0xba/0xe8
[task *0000038000003dd8] psw_idle_exit+0x0/0x6 <-- pt_regs

 ([task    0000038000003dd8] arch_cpu_idle+0x3c/0xd0)
  [task    0000038000003e10] default_idle_call+0x42/0x148
  [task    0000038000003e30] do_idle+0xce/0x160
  [task    0000038000003e70] cpu_startup_entry+0x36/0x40
  [task    0000038000003ea0] arch_call_rest_init+0x76/0x80

---
 arch/s390/kernel/entry.S | 1 +
 1 file changed, 1 insertion(+)

index c544b7a11ebb..5cba1815b8f8 100644
@@ -993,6 +993,7 @@ ENDPROC(ext_int_handler)
  * Load idle PSW. The second "half" of this function is in .Lcleanup_idle.
  */
 ENTRY(psw_idle)
+	stg	%r14,(__SF_GPRS+8*8)(%r15)
 	stg	%r3,__SF_EMPTY(%r15)
 	larl	%r1,.Lpsw_idle_lpsw+4
 	stg	%r1,__SF_EMPTY+8(%r15)

2.30.2

From: Michael Brown <[email protected]>

[ Upstream commit 2afeec08ab5c86ae21952151f726bfe184f6b23d ]

The logic in connect() is currently written with the assumption that xenbus_watch_pathfmt() will return an error for a node that does not exist. This assumption is incorrect: xenstore does allow a watch to be registered for a nonexistent node (and will send notifications should the node be subsequently created).

As of commit 1f2565780 ("xen-netback: remove 'hotplug-status' once it has served its purpose"), this leads to a failure when a domU transitions into XenbusStateConnected more than once. On the first domU transition into Connected state, the "hotplug-status" node will be deleted by the hotplug_status_changed() callback in dom0. On the second or subsequent domU transition into Connected state, the hotplug_status_changed() callback will therefore never be invoked, and so the backend will remain stuck in InitWait.

This failure prevents scenarios such as reloading the xen-netfront module within a domU, or booting a domU via iPXE. There is unfortunately no way for the domU to work around this dom0 bug.

Fix by explicitly checking for existence of the "hotplug-status" node, thereby creating the behaviour that was previously assumed to exist.

---
 drivers/net/xen-netback/xenbus.c | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

index 9e61a6f29464..416305e6d093 100644
@@ -979,11 +979,15 @@ static void connect(struct backend_info *be)
 	xenvif_carrier_on(be->vif);
 
 	unregister_hotplug_status_watch(be);
-	err = xenbus_watch_pathfmt(dev, &be->hotplug_status_watch, NULL,
-				   hotplug_status_changed,
-				   "%s/%s", dev->nodename, "hotplug-status");
-	if (!err)
+	if (xenbus_exists(XBT_NIL, dev->nodename, "hotplug-status")) {
+		err = xenbus_watch_pathfmt(dev, &be->hotplug_status_watch,
+					   NULL, hotplug_status_changed,
+					   "%s/%s", dev->nodename,
+					   "hotplug-status");
+		if (err)
+			goto err;
 		be->have_hotplug_status_watch = 1;
+	}
 
 	netif_tx_wake_all_queues(be->vif->dev);
 

2.30.2

From: Wan Jiabing <[email protected]>

[ Upstream commit 416dcc5ce9d2a810477171c62ffa061a98f87367 ]

Fix the following coccicheck warning:

./drivers/net/ethernet/cavium/liquidio/cn66xx_regs.h:413:6-28:
duplicated argument to & or |

The CN6XXX_INTR_M1UPB0_ERR here is duplicate. Here should be CN6XXX_INTR_M1UNB0_ERR.

---
 drivers/net/ethernet/cavium/liquidio/cn66xx_regs.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

index b248966837b4..7aad40b2aa73 100644
@@ -412,7 +412,7 @@
 	   | CN6XXX_INTR_M0UNWI_ERR             \
 	   | CN6XXX_INTR_M1UPB0_ERR             \
 	   | CN6XXX_INTR_M1UPWI_ERR             \
-	   | CN6XXX_INTR_M1UPB0_ERR             \
+	   | CN6XXX_INTR_M1UNB0_ERR             \
 	   | CN6XXX_INTR_M1UNWI_ERR             \
 	   | CN6XXX_INTR_INSTR_DB_OF_ERR        \
 	   | CN6XXX_INTR_SLIST_DB_OF_ERR        \

2.30.2

From: Randy Dunlap <[email protected]>

[ Upstream commit d199161653d612b8fb96ac51bfd5b2d2782ecef3 ]

e1000's #define of CONFIG_RAM_BASE conflicts with a Kconfig symbol in arch/csky/Kconfig.

The symbol in e1000 has been around longer, so change arch/csky/ to use DRAM_BASE instead of RAM_BASE to remove the conflict. (although e1000 is also a 2-line change)

---
 arch/csky/Kconfig            | 2 +-
 arch/csky/include/asm/page.h | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

index 48b2e1b59119..4f48a2f0513b 100644
@@ -220,7 +220,7 @@ config FORCE_MAX_ZONEORDER
 	int "Maximum zone order"
 	default "11"
 
-config RAM_BASE
+config DRAM_BASE
 	hex "DRAM start addr (the same with memory-section in dts)"
 	default 0x0
 

index 9738eacefdc7..62bb307459ca 100644
@@ -28,7 +28,7 @@
 #define SSEG_SIZE	0x20000000
 #define LOWMEM_LIMIT	(SSEG_SIZE * 2)
 
-#define PHYS_OFFSET_OFFSET (CONFIG_RAM_BASE & (SSEG_SIZE - 1))
+#define PHYS_OFFSET_OFFSET (CONFIG_DRAM_BASE & (SSEG_SIZE - 1))
 
 #ifndef __ASSEMBLY__
 

2.30.2

From: Randy Dunlap <[email protected]>

[ Upstream commit e2af9da4f867a1a54f1252bf3abc1a5c63951778 ]

Fix IA64 discontig.c Section mismatch warnings.

When CONFIG_SPARSEMEM=y and CONFIG_MEMORY_HOTPLUG=y, the functions computer_pernodesize() and scatter_node_data() should not be marked as __meminit because they are needed after init, on any memory hotplug event. Also, early_nr_cpus_node() is called by compute_pernodesize(), so early_nr_cpus_node() cannot be __meminit either.

WARNING: modpost: vmlinux.o(.text.unlikely+0x1612): Section mismatch in reference from the function arch_alloc_nodedata() to the function .meminit.text:compute_pernodesize() The function arch_alloc_nodedata() references the function __meminit compute_pernodesize().
This is often because arch_alloc_nodedata lacks a __meminit annotation or the annotation of compute_pernodesize is wrong.

WARNING: modpost: vmlinux.o(.text.unlikely+0x1692): Section mismatch in reference from the function arch_refresh_nodedata() to the function .meminit.text:scatter_node_data() The function arch_refresh_nodedata() references the function __meminit scatter_node_data().
This is often because arch_refresh_nodedata lacks a __meminit annotation or the annotation of scatter_node_data is wrong.

WARNING: modpost: vmlinux.o(.text.unlikely+0x1502): Section mismatch in reference from the function compute_pernodesize() to the function .meminit.text:early_nr_cpus_node() The function compute_pernodesize() references the function __meminit early_nr_cpus_node().
This is often because compute_pernodesize lacks a __meminit annotation or the annotation of early_nr_cpus_node is wrong.

---
 arch/ia64/mm/discontig.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

index 4f33f6e7e206..41d243c0c626 100644
@@ -95,7 +95,7 @@ static int __init build_node_maps(unsigned long start, unsigned long len,
  * acpi_boot_init() (which builds the node_to_cpu_mask array) hasn't been
  * called yet.  Note that node 0 will also count all non-existent cpus.
  */
-static int __meminit early_nr_cpus_node(int node)
+static int early_nr_cpus_node(int node)
 {
 	int cpu, n = 0;
 

@@ -110,7 +110,7 @@ static int __meminit early_nr_cpus_node(int node)
  * compute_pernodesize - compute size of pernode data
  * @node: the node id.
  */
-static unsigned long __meminit compute_pernodesize(int node)
+static unsigned long compute_pernodesize(int node)
 {
 	unsigned long pernodesize = 0, cpus;
 

@@ -367,7 +367,7 @@ static void __init reserve_pernode_space(void)
 	}
 }
 
-static void __meminit scatter_node_data(void)
+static void scatter_node_data(void)
 {
 	pg_data_t **dst;
 	int node;

2.30.2

From: John Paul Adrian Glaubitz <[email protected]>

[ Upstream commit f4bf09dc3aaa4b07cd15630f2023f68cb2668809 ]

The ia64_mf() macro defined in tools/arch/ia64/include/asm/barrier.h is already defined in <asm/gcc_intrin.h> on ia64 which causes libbpf failing to build:

CC /usr/src/linux/tools/bpf/bpftool//libbpf/staticobjs/libbpf.o
In file included from /usr/src/linux/tools/include/asm/barrier.h:24,

                   from /usr/src/linux/tools/include/linux/ring_buffer.h:4,
                   from libbpf.c:37:
  /usr/src/linux/tools/include/asm/../../arch/ia64/include/asm/barrier.h:43: error: "ia64_mf" redefined [-Werror]
     43 | #define ia64_mf()       asm volatile ("mf" ::: "memory")
        |
  In file included from /usr/include/ia64-linux-gnu/asm/intrinsics.h:20,
                   from /usr/include/ia64-linux-gnu/asm/swab.h:11,
                   from /usr/include/linux/swab.h:8,
                   from /usr/include/linux/byteorder/little_endian.h:13,
                   from /usr/include/ia64-linux-gnu/asm/byteorder.h:5,
                   from /usr/src/linux/tools/include/uapi/linux/perf_event.h:20,
                   from libbpf.c:36:
  /usr/include/ia64-linux-gnu/asm/gcc_intrin.h:382: note: this is the location of the previous definition
    382 | #define ia64_mf() __asm__ volatile ("mf" ::: "memory")
        |

cc1: all warnings being treated as errors

Thus, remove the definition from tools/arch/ia64/include/asm/barrier.h.

---
 tools/arch/ia64/include/asm/barrier.h | 3 ---
 1 file changed, 3 deletions(-)

index 4d471d9511a5..6fffe5682713 100644
@@ -39,9 +39,6 @@
  * sequential memory pages only.
  */
 
-/* XXX From arch/ia64/include/uapi/asm/gcc_intrin.h */
-#define ia64_mf()       asm volatile ("mf" ::: "memory")
-
 #define mb()		ia64_mf()
 #define rmb()		mb()
 #define wmb()		mb()

2.30.2

From: Mike Galbraith <[email protected]>

commit 5849cdf8c120e3979c57d34be55b92d90a77a47e upstream.

Commit in Fixes: added support for kexec-ing a kernel on panic using a new system call. As part of it, it does prepare a memory map for the new kernel.

However, while doing so, it wrongly accesses memory it has not
allocated: it accesses the first element of the cmem->ranges[] array in memmap_exclude_ranges() but it has not allocated the memory for it in crash_setup_memmap_entries(). As KASAN reports:

  BUG: KASAN: vmalloc-out-of-bounds in crash_setup_memmap_entries+0x17e/0x3a0
  Write of size 8 at addr ffffc90000426008 by task kexec/1187

  (gdb) list *crash_setup_memmap_entries+0x17e
  0xffffffff8107cafe is in crash_setup_memmap_entries (arch/x86/kernel/crash.c:322).
  317                                      unsigned long long mend)
  318     {
  319             unsigned long start, end;
  320
  321             cmem->ranges[0].start = mstart;
  322             cmem->ranges[0].end = mend;
  323             cmem->nr_ranges = 1;
  324
  325             /* Exclude elf header region */
  326             start = image->arch.elf_load_addr;
  (gdb)

Make sure the ranges array becomes a single element allocated.

[ bp: Write a proper commit message. ]

---
 arch/x86/kernel/crash.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -364,7 +364,7 @@ int crash_setup_memmap_entries(struct ki
 	struct crash_memmap_data cmd;
 	struct crash_mem *cmem;
 
-	cmem = vzalloc(sizeof(struct crash_mem));
+	cmem = vzalloc(struct_size(cmem, ranges, 1));
 	if (!cmem)
 		return -ENOMEM;
 

All tests passing for Tegra ...

Test results for stable-v5.4:

    12 builds:	12 pass, 0 fail
    26 boots:	26 pass, 0 fail
    59 tests:	59 pass, 0 fail

Linux version: 5.4.115-rc1-gf9824acd6902
Boards tested: tegra124-jetson-tk1, tegra186-p2771-0000,

                tegra194-p2972-0000, tegra20-ventana,
                tegra210-p2371-2180, tegra210-p3450-0000,
                tegra30-cardhu-a04

Jon

On ARCH_BRCMSTB, using 32-bit and 64-bit ARM kernels:

Florian

Build results:

	total: 157 pass: 157 fail: 0
Qemu test results:
	total: 433 pass: 433 fail: 0

Guenter

Hi Greg,

Build test:
mips (gcc version 10.3.1 20210419): 65 configs -> no new failure arm (gcc version 10.3.1 20210419): 107 configs -> no new failure x86_64 (gcc version 10.2.1 20210110): 2 configs -> no failure

Boot test:
x86_64: Booted on my test laptop. No regression.
x86_64: Booted on qemu. No regression.
arm: Booted on rpi3b. No regression.

--
Regards
Sudip

Compiled and booted on my test system. No dmesg regressions.

thanks,
-- Shuah

Tested on arm64 and x86 for 5.4.115-rc1,

Kernel repo:
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
Branch: linux-5.4.y
Version: 5.4.115-rc1
Commit: f9824acd69029477e99bf0757f1589371108dba5
Compiler: gcc version 7.3.0 (GCC)

arm64:
--------------------------------------------------------------------
Testcase Result Summary:
total: 6304
passed: 6304
failed: 0
timeout: 0
--------------------------------------------------------------------

x86:
--------------------------------------------------------------------
Testcase Result Summary:
total: 6304
passed: 6304
failed: 0
timeout: 0
--------------------------------------------------------------------

Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.

## Build
* kernel: 5.4.115-rc1
* git: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
* git branch: linux-5.4.y
* git commit: f9824acd69029477e99bf0757f1589371108dba5
* git describe: v5.4.114-21-gf9824acd6902
* test details:
https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-5.4.y/build/v5.4.114-21-gf9824acd6902

## No regressions (compared to v5.4.114)

## No fixes (compared to v5.4.114)

## Test result summary
total: 77701, pass: 62177, fail: 2495, skip: 12776, xfail: 253,

## Build Summary
* arc: 10 total, 10 passed, 0 failed
* arm: 191 total, 191 passed, 0 failed
* arm64: 25 total, 25 passed, 0 failed
* dragonboard-410c: 1 total, 1 passed, 0 failed
* hi6220-hikey: 1 total, 1 passed, 0 failed
* i386: 14 total, 14 passed, 0 failed
* juno-r2: 1 total, 1 passed, 0 failed
* mips: 45 total, 45 passed, 0 failed
* parisc: 9 total, 9 passed, 0 failed
* powerpc: 27 total, 27 passed, 0 failed
* riscv: 21 total, 21 passed, 0 failed
* s390: 9 total, 9 passed, 0 failed
* sh: 18 total, 18 passed, 0 failed
* sparc: 9 total, 9 passed, 0 failed
* x15: 1 total, 1 passed, 0 failed
* x86: 1 total, 1 passed, 0 failed
* x86_64: 25 total, 25 passed, 0 failed

## Test suites summary
* fwts
* igt-gpu-tools
* install-android-platform-tools-r2600
* kselftest-
* kselftest-android
* kselftest-bpf
* kselftest-breakpoints
* kselftest-capabilities
* kselftest-cgroup
* kselftest-clone3
* kselftest-core
* kselftest-cpu-hotplug
* kselftest-cpufreq
* kselftest-drivers
* kselftest-efivarfs
* kselftest-filesystems
* kselftest-firmware
* kselftest-fpu
* kselftest-ftrace
* kselftest-futex
* kselftest-gpio
* kselftest-intel_pstate
* kselftest-ipc
* kselftest-ir
* kselftest-kcmp
* kselftest-kexec
* kselftest-kvm
* kselftest-lib
* kselftest-livepatch
* kselftest-lkdtm
* kselftest-membarrier
* kselftest-memfd
* kselftest-memory-hotplug
* kselftest-mincore
* kselftest-mount
* kselftest-mqueue
* kselftest-net
* kselftest-netfilter
* kselftest-nsfs
* kselftest-openat2
* kselftest-pid_namespace
* kselftest-pidfd
* kselftest-proc
* kselftest-pstore
* kselftest-ptrace
* kselftest-rseq
* kselftest-rtc
* kselftest-seccomp
* kselftest-sigaltstack
* kselftest-size
* kselftest-splice
* kselftest-static_keys
* kselftest-sync
* kselftest-sysctl
* kselftest-tc-testing
* kselftest-timens
* kselftest-timers
* kselftest-tmpfs
* kselftest-tpm2
* kselftest-user
* kselftest-vm
* kselftest-vsyscall-mode-none-
* kselftest-x86
* kselftest-zram
* kvm-unit-tests
* libhugetlbfs
* linux-log-parser
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-controllers-tests
* ltp-cpuhotplug-tests
* ltp-crypto-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-open-posix-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* ltp-tracing-tests
* network-basic-tests
* packetdrill
* perf
* rcutorture
* ssuite
* v4l2-compliance

--
Linaro LKFT
https://lkft.linaro.org