docs: platform: Sort platform names
PATCH 1/3 docs: platform: Sort platform names
Let's sort the platform names in alphabetical order.
---
docs/platform/generic.md | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
docs/platform/generic.md +2 -2
@@ -46,11 +46,11 @@ RISC-V Platforms Using Generic Platform --------------------------------------- * **QEMU RISC-V Virt Machine** (*[qemu_virt.md]*) -* **Spike** (*[spike.md]*) * **Shakti C-class SoC Platform** (*[shakti_cclass.md]*) +* **Spike** (*[spike.md]*) * **T-HEAD C9xx series Processors** (*[thead-c9xx.md]*) [qemu_virt.md]: qemu_virt.md -[spike.md]: spike.md [shakti_cclass.md]: shakti_cclass.md +[spike.md]: spike.md [thead-c9xx.md]: thead-c9xx.md
Signature · 1 line
2.25.1
PATCH 2/3 docs: platform: Describe sifive_fu540 as supported generic platform
The upstream U-Boot/QEMU have been using generic platform for SiFive HiFive Unleashed board for some time. Let's document sifive_fu540 as one of the supported targets for "generic" platform.
---
docs/platform/generic.md | 2 ++ docs/platform/sifive_fu540.md | 16 ++++++++-------- 2 files changed, 10 insertions(+), 8 deletions(-)
docs/platform/generic.md +2 -0
@@ -47,10 +47,12 @@ RISC-V Platforms Using Generic Platform * **QEMU RISC-V Virt Machine** (*[qemu_virt.md]*) * **Shakti C-class SoC Platform** (*[shakti_cclass.md]*) +* **SiFive HiFive Unleashed** (*[sifive_fu540.md]*) * **Spike** (*[spike.md]*) * **T-HEAD C9xx series Processors** (*[thead-c9xx.md]*) [qemu_virt.md]: qemu_virt.md [shakti_cclass.md]: shakti_cclass.md +[sifive_fu540.md]: sifive_fu540.md [spike.md]: spike.md [thead-c9xx.md]: thead-c9xx.md
docs/platform/sifive_fu540.md +8 -8
@@ -8,7 +8,7 @@ With QEMU v4.2 or above release, the 'sifive_u' machine can be used to test OpenSBI image built for the real hardware as well. To build platform specific library and firmwares, provide the -*PLATFORM=sifive/fu540* parameter to the top level `make` command. +*PLATFORM=generic* parameter to the top level `make` command. Platform Options ----------------
@@ -32,10 +32,10 @@ To use Linux v5.2 (or higher), the pre-built DTB (DT binary) from Linux v5.2 the compile time option *FW_FDT_PATH*. ``` -make PLATFORM=sifive/fu540 FW_PAYLOAD_PATH=<linux_build_directory>/arch/riscv/boot/Image +make PLATFORM=generic FW_PAYLOAD_PATH=<linux_build_directory>/arch/riscv/boot/Image or (For Linux v5.2 or higher) -make PLATFORM=sifive/fu540 FW_PAYLOAD_PATH=<linux_build_directory>/arch/riscv/boot/Image FW_FDT_PATH=<hifive-unleashed-a00.dtb path from Linux kernel> +make PLATFORM=generic FW_PAYLOAD_PATH=<linux_build_directory>/arch/riscv/boot/Image FW_FDT_PATH=<hifive-unleashed-a00.dtb path from Linux kernel> ``` **U-Boot Payload**
@@ -45,7 +45,7 @@ sifive_fu540_defconfig configuration and with U-Boot v2020.01, and up to v2021.04. sifive_unleashed_defconfig shall be used with v2021.07 or above. ``` -make PLATFORM=sifive/fu540 FW_PAYLOAD_PATH=<u-boot_build_dir>/u-boot-dtb.bin +make PLATFORM=generic FW_PAYLOAD_PATH=<u-boot_build_dir>/u-boot-dtb.bin ``` For U-Boot v2020.07-rc4 or later releases, SPL support was added in U-Boot. Please refer to the detailed U-Boot booting guide available at [U-Boot].
@@ -64,7 +64,7 @@ That's why the generated firmware binary in above steps should be copied to the partition of the sdcard with above GUID. ``` -dd if=build/platform/sifive/fu540/firmware/fw_payload.bin of=/dev/disk2s1 bs=1024 +dd if=build/platform/generic/firmware/fw_payload.bin of=/dev/disk2s1 bs=1024 ``` In my case, it is the first partition is **disk2s1** that has been formatted
@@ -161,7 +161,7 @@ U-Boot uses the DTB generated by QEMU, and u-boot.bin should be used as the payload image, like: ``` -make PLATFORM=sifive/fu540 FW_PAYLOAD_PATH=<u-boot_build_dir>/u-boot.bin +make PLATFORM=generic FW_PAYLOAD_PATH=<u-boot_build_dir>/u-boot.bin ``` U-Boot v2020.07 release added SPL support to SiFive HiFive Unleashed board,
@@ -179,12 +179,12 @@ The above errors can be safely ignored as we don't run U-Boot SPL under QEMU. Run: ``` qemu-system-riscv64 -M sifive_u -m 256M -nographic \ - -bios build/platform/sifive/fu540/firmware/fw_payload.bin + -bios build/platform/generic/firmware/fw_payload.bin ``` or ``` qemu-system-riscv64 -M sifive_u -m 256M -nographic \ - -bios build/platform/sifive/fu540/firmware/fw_jump.bin \ + -bios build/platform/generic/firmware/fw_jump.bin \ -kernel <uboot_build_dir>/u-boot.bin ```
Signature · 1 line
2.25.1
PATCH 2/3 docs: platform: Describe sifive_fu540 as supported generic platform
Quoted 9 lines
-----Original Message-----
From: Bin Meng <[email protected]>
Sent: 29 April 2021 15:46
To: Anup Patel <[email protected]>; opensbi at lists.infradead.org
Subject: [PATCH 2/3] docs: platform: Describesifive_fu540as supported generic platform
Quoted 5 lines
The upstream U-Boot/QEMU have been using generic platform for SiFive HiFive Unleashed board for some time. Let's document
sifive_fu540as one of the supported targets for "generic" platform.Signed-off-by Bin Meng <[email protected]>
Thanks for updating this.
Looks good to me.
Regards,
Anup
Quoted 107 lines
---
docs/platform/generic.md | 2 ++ docs/platform/sifive_fu540.md | 16 ++++++++-------- 2 files changed, 10 insertions(+), 8 deletions(-)docs/platform/generic.md index renamed from docs/platform/generic.md +0
-0e0bf8fe..73a8afa 100644
docs/platform/generic.md +2
-0@@ -47,10 +47,12 @@ RISC-V Platforms Using Generic Platform * **QEMU RISC-V Virt Machine** (*[qemu_virt.md]*) * **Shakti C-class SoC Platform** (*[shakti_cclass.md]*) +* **SiFive HiFive Unleashed** (*[sifive_fu540.md]*) * **Spike** (*[spike.md]*) * **T-HEAD C9xx series Processors** (*[thead-c9xx.md]*) [qemu_virt.md]: qemu_virt.md [shakti_cclass.md]: shakti_cclass.md +[sifive_fu540.md]: sifive_fu540.md [spike.md]: spike.md [thead-c9xx.md]: thead-c9xx.mddocs/platform/sifive_fu540.md +0
-0@@ -8,7 +8,7 @@ With QEMU v4.2 or above release, the 'sifive_u' machinecan be used to test OpenSBI image built for the real hardware as well.
To build platform specific library and firmwares, provide the
docs/platform/sifive_fu540.md +1
-1-*PLATFORM=sifive/fu540* parameter to the top level `make` command. +*PLATFORM=generic* parameter to the top level `make` command. Platform Options ----------------@@ -32,10 +32,10 @@ To use Linux v5.2 (or higher), the pre-built DTB (DTbinary) from Linux v5.2 the compile time option *FW_FDT_PATH*.
```
-make PLATFORM=sifive/fu540 FW_PAYLOAD_PATH=<linux_build_directory>/arch/riscv/boot/Imagedocs/platform/sifive_fu540.md +2
-1+make PLATFORM=generic +FW_PAYLOAD_PATH=<linux_build_directory>/arch/riscv/boot/Image or (For Linux v5.2 or higher) -make PLATFORM=sifive/fu540FW_PAYLOAD_PATH=<linux_build_directory>/arch/riscv/boot/Image FW_FDT_PATH=<hifive-unleashed-a00.dtb path from Linux kernel>
docs/platform/sifive_fu540.md +3
-0+make PLATFORM=generic +FW_PAYLOAD_PATH=<linux_build_directory>/arch/riscv/boot/Image +FW_FDT_PATH=<hifive-unleashed-a00.dtb path from Linux kernel> ``` **U-Boot Payload**@@ -45,7 +45,7 @@ sifive_fu540_defconfig configuration and with U-Bootv2020.01, and up to v2021.04.
sifive_unleashed_defconfigshall be used with v2021.07 or above.``` -make PLATFORM=sifive/fu540 FW_PAYLOAD_PATH=<u-boot_build_dir>/u- boot-dtb.bin +make PLATFORM=generic FW_PAYLOAD_PATH=<u-boot_build_dir>/u- boot-dtb.bin ```For U-Boot v2020.07-rc4 or later releases, SPL support was added in U-Boot. Please refer to the detailed U-Boot booting guide available at [U-Boot].
docs/platform/sifive_fu540.md +0
-0@@ -64,7 +64,7 @@ That's why the generated firmware binary in abovesteps should be copied to the partition of the sdcard with above GUID.
```
-dd if=build/platform/sifive/fu540/firmware/fw_payload.bin of=/dev/disk2s1 bs=1024docs/platform/sifive_fu540.md +2
-0+dd if=build/platform/generic/firmware/fw_payload.bin of=/dev/disk2s1 +bs=1024 ``` In my case, it is the first partition is **disk2s1** that has been formatted@@ -161,7 +161,7 @@ U-Boot uses the DTB generated by QEMU, and u-boot.bin should be used as the payload image, like:
``` -make PLATFORM=sifive/fu540 FW_PAYLOAD_PATH=<u-boot_build_dir>/u- boot.bin +make PLATFORM=generic FW_PAYLOAD_PATH=<u-boot_build_dir>/u- boot.bin ```U-Boot v2020.07 release added SPL support to SiFive HiFive Unleashed
board, @@ -179,12 +179,12 @@ The above errors can be safely ignored as we don't run U-Boot SPL under QEMU.
Run:
```
qemu-system-riscv64 -Msifive_u-m 256M -nographic \docs/platform/sifive_fu540.md +2
-3- -bios build/platform/sifive/fu540/firmware/fw_payload.bin + -bios build/platform/generic/firmware/fw_payload.bin ``` or ``` qemu-system-riscv64 -M sifive_u -m 256M -nographic \ - -bios build/platform/sifive/fu540/firmware/fw_jump.bin \ + -bios build/platform/generic/firmware/fw_jump.bin \ -kernel <uboot_build_dir>/u-boot.bin ``` --2.25.1
Anup Patel
AppliedPATCH 2/3 docs: platform: Describe sifive_fu540 as supported generic platform
Quoted 22 lines
-----Original Message-----
From: Anup Patel
Sent: 04 May 2021 09:11
To: Bin Meng <[email protected]>; opensbi at lists.infradead.org
Subject: RE: [PATCH 2/3] docs: platform: Describesifive_fu540as supported generic platformQuoted 11 lines
-----Original Message-----
From: Bin Meng <[email protected]>
Sent: 29 April 2021 15:46
To: Anup Patel <[email protected]>; opensbi at lists.infradead.org
Subject: [PATCH 2/3] docs: platform: Describesifive_fu540as supported generic platformThe upstream U-Boot/QEMU have been using generic platform for SiFive HiFive Unleashed board for some time. Let's document
sifive_fu540as one of the supported targets for "generic" platform.
Quoted 8 lines
Quoted 1 line
Signed-off-by Bin Meng <[email protected]>Thanks for updating this.
Looks good to me.
Reviewed-by Anup Patel <[email protected]>
Applied this patch to the riscv/opensbi repo
Regards,
Anup
Quoted 116 lines
Regards,
AnupQuoted 28 lines
---
docs/platform/generic.md | 2 ++ docs/platform/sifive_fu540.md | 16 ++++++++-------- 2 files changed, 10 insertions(+), 8 deletions(-)docs/platform/generic.md index renamed from docs/platform/generic.md +0
-0e0bf8fe..73a8afa 100644
docs/platform/generic.md +2
-0@@ -47,10 +47,12 @@ RISC-V Platforms Using Generic Platform * **QEMU RISC-V Virt Machine** (*[qemu_virt.md]*) * **Shakti C-class SoC Platform** (*[shakti_cclass.md]*) +* **SiFive HiFive Unleashed** (*[sifive_fu540.md]*) * **Spike** (*[spike.md]*) * **T-HEAD C9xx series Processors** (*[thead-c9xx.md]*) [qemu_virt.md]: qemu_virt.md [shakti_cclass.md]: shakti_cclass.md +[sifive_fu540.md]: sifive_fu540.md [spike.md]: spike.md [thead-c9xx.md]: thead-c9xx.md(quoted diff) +0
-0
b/docs/platform/sifive_fu540.mdindex b38df47..5cbca21 100644docs/platform/sifive_fu540.md +0
-0@@ -8,7 +8,7 @@ With QEMU v4.2 or above release, the 'sifive_u'Quoted 1 line
machine can be used to test OpenSBI image built for the real hardware as
well.
Quoted 32 lines
To build platform specific library and firmwares, provide the
docs/platform/sifive_fu540.md +1
-1-*PLATFORM=sifive/fu540* parameter to the top level `make` command. +*PLATFORM=generic* parameter to the top level `make` command. Platform Options ----------------@@ -32,10 +32,10 @@ To use Linux v5.2 (or higher), the pre-built DTB(DT
binary) from Linux v5.2 the compile time option *FW_FDT_PATH*.```
-make PLATFORM=sifive/fu540 FW_PAYLOAD_PATH=<linux_build_directory>/arch/riscv/boot/Imagedocs/platform/sifive_fu540.md +2
-1+make PLATFORM=generic +FW_PAYLOAD_PATH=<linux_build_directory>/arch/riscv/boot/Image or (For Linux v5.2 or higher) -make PLATFORM=sifive/fu540FW_PAYLOAD_PATH=<linux_build_directory>/arch/riscv/boot/Image FW_FDT_PATH=<hifive-unleashed-a00.dtb path from Linux kernel>
docs/platform/sifive_fu540.md +3
-0+make PLATFORM=generic +FW_PAYLOAD_PATH=<linux_build_directory>/arch/riscv/boot/Image +FW_FDT_PATH=<hifive-unleashed-a00.dtb path from Linux kernel> ``` **U-Boot Payload**@@ -45,7 +45,7 @@ sifive_fu540_defconfig configuration and with U-Bootv2020.01, and up to v2021.04.
sifive_unleashed_defconfigshall be used with
v2021.07 or above.Quoted 2 lines
```
-make PLATFORM=sifive/fu540 FW_PAYLOAD_PATH=<u-boot_build_dir>/u-
Quoted 5 lines
boot-dtb.bin
+make PLATFORM=generic FW_PAYLOAD_PATH=<u-boot_build_dir>/u- boot-dtb.bin
```
For U-Boot v2020.07-rc4 or later releases, SPL support was added in U-Boot.
Quoted 12 lines
Please refer to the detailed U-Boot booting guide available at [U-Boot].
docs/platform/sifive_fu540.md +0
-0@@ -64,7 +64,7 @@ That's why the generated firmware binary in abovesteps should be copied to the partition of the sdcard with above GUID.
```
-dd if=build/platform/sifive/fu540/firmware/fw_payload.bin of=/dev/disk2s1 bs=1024docs/platform/sifive_fu540.md +2
-0+dd if=build/platform/generic/firmware/fw_payload.bin of=/dev/disk2s1 +bs=1024 ``` In my case, it is the first partition is **disk2s1** that has beenQuoted 1 line
formatted @@ -161,7 +161,7 @@ U-Boot uses the DTB generated by
QEMU,
Quoted 4 lines
and u- boot.bin should be used as the payload image, like:
```
-make PLATFORM=sifive/fu540 FW_PAYLOAD_PATH=<u-boot_build_dir>/u-
Quoted 23 lines
boot.bin
+make PLATFORM=generic FW_PAYLOAD_PATH=<u-boot_build_dir>/u- boot.bin``` U-Boot v2020.07 release added SPL support to SiFive HiFive Unleashed board, @@ -179,12 +179,12 @@ The above errors can be safely ignored as we don't run U-Boot SPL under QEMU. Run: ```qemu-system-riscv64 -M
sifive_u-m 256M -nographic \docs/platform/sifive_fu540.md +2
-3- -bios build/platform/sifive/fu540/firmware/fw_payload.bin + -bios build/platform/generic/firmware/fw_payload.bin ``` or ``` qemu-system-riscv64 -M sifive_u -m 256M -nographic \ - -bios build/platform/sifive/fu540/firmware/fw_jump.bin \ + -bios build/platform/generic/firmware/fw_jump.bin \ -kernel <uboot_build_dir>/u-boot.bin ``` --2.25.1
PATCH 3/3 platform: Remove sifive/fu540 platform
In reply to Bin MengNow that SiFive HiFive Unleashed board is using the generic platform support in OpenSBI, let's remove the old non-generic one.
---
platform/sifive/fu540/config.mk | 40 ------- platform/sifive/fu540/objects.mk | 10 -- platform/sifive/fu540/platform.c | 175 ------------------------------- scripts/create-binary-archive.sh | 2 - 4 files changed, 227 deletions(-) delete mode 100644 platform/sifive/fu540/config.mk delete mode 100644 platform/sifive/fu540/objects.mk delete mode 100644 platform/sifive/fu540/platform.c
platform/sifive/fu540/config.mk deleted +0 -40
@@ -1,40 +0,0 @@ -# -# SPDX-License-Identifier: BSD-2-Clause -# -# Copyright (c) 2019 Western Digital Corporation or its affiliates. -# -# Authors: -# Atish Patra <[email protected]> -# - -# Compiler flags -platform-cppflags-y = -platform-cflags-y = -platform-asflags-y = -platform-ldflags-y = - -# Command for platform specific "make run" -platform-runcmd = qemu-system-riscv$(PLATFORM_RISCV_XLEN) -M sifive_u -m 256M \ - -nographic -bios $(build_dir)/platform/sifive/fu540/firmware/fw_payload.elf - -# Blobs to build -FW_TEXT_START=0x80000000 -FW_DYNAMIC=y -FW_JUMP=y -ifeq ($(PLATFORM_RISCV_XLEN), 32) - # This needs to be 4MB aligned for 32-bit system - FW_JUMP_ADDR=0x80400000 -else - # This needs to be 2MB aligned for 64-bit system - FW_JUMP_ADDR=0x80200000 -endif -FW_JUMP_FDT_ADDR=0x88000000 -FW_PAYLOAD=y -ifeq ($(PLATFORM_RISCV_XLEN), 32) - # This needs to be 4MB aligned for 32-bit system - FW_PAYLOAD_OFFSET=0x400000 -else - # This needs to be 2MB aligned for 64-bit system - FW_PAYLOAD_OFFSET=0x200000 -endif -FW_PAYLOAD_FDT_ADDR=0x88000000
platform/sifive/fu540/objects.mk deleted +0 -10
@@ -1,10 +0,0 @@ -# -# SPDX-License-Identifier: BSD-2-Clause -# -# Copyright (c) 2019 Western Digital Corporation or its affiliates. -# -# Authors: -# Atish Patra <[email protected]> -# - -platform-objs-y += platform.o
platform/sifive/fu540/platform.c deleted +0 -175
175 lines not on this page · raw message
scripts/create-binary-archive.sh +0 -2
@@ -95,12 +95,10 @@ build_opensbi() { case "${BUILD_RISCV_XLEN}" in 32) # Setup 32-bit platform list - BUILD_PLATFORM_SUBDIR=("sifive/fu540") BUILD_PLATFORM_SUBDIR+=("generic") ;; 64) # Setup 64-bit platform list - BUILD_PLATFORM_SUBDIR=("sifive/fu540") BUILD_PLATFORM_SUBDIR+=("nuclei/ux600") BUILD_PLATFORM_SUBDIR+=("kendryte/k210") BUILD_PLATFORM_SUBDIR+=("fpga/ariane")
Signature · 1 line
2.25.1
PATCH 3/3 platform: Remove sifive/fu540 platform
+David
Quoted 10 lines
-----Original Message-----
From: Bin Meng <[email protected]>
Sent: 29 April 2021 15:46
To: Anup Patel <[email protected]>; opensbi at lists.infradead.org
Subject: [PATCH 3/3] platform: Remove sifive/fu540 platformNow that SiFive HiFive Unleashed board is using the generic platform support in OpenSBI, let's remove the old non-generic one.
Signed-off-by Bin Meng <[email protected]>
Looks good to me.
@David Abdurachmanov I hope this is okay ??
Regards,
Anup
Quoted 272 lines
---
platform/sifive/fu540/config.mk | 40 ------- platform/sifive/fu540/objects.mk | 10 -- platform/sifive/fu540/platform.c | 175 ------------------------------- scripts/create-binary-archive.sh | 2 - 4 files changed, 227 deletions(-) delete mode 100644 platform/sifive/fu540/config.mk delete mode 100644
platform/sifive/fu540/objects.mkdelete mode 100644platform/sifive/fu540/platform.c(quoted diff) +0
-0
b/platform/sifive/fu540/config.mkdeleted file mode 100644 index 23169b1..0000000platform/sifive/fu540/config.mk deleted +0
-2@@ -1,40 +0,0 @@ -# -# SPDX-License-Identifier: BSD-2-Clause -# -# Copyright (c) 2019 WesternDigital Corporation or its affiliates.
platform/sifive/fu540/config.mk deleted +0
-13-# -# Authors: -# Atish Patra <[email protected]> -# - -# Compiler flags -platform-cppflags-y = -platform-cflags-y = -platform-asflags-y = -platform-ldflags-y = - -# Command for platform specific "make run" -platform-runcmd = qemu-system-riscv$(PLATFORM_RISCV_XLEN) -M
sifive_u-m 256M \
- -nographic -bios $(build_dir)/platform/sifive/fu540/firmware/fw_payload.elfplatform/sifive/fu540/config.mk deleted +0
-22- -# Blobs to build -FW_TEXT_START=0x80000000 -FW_DYNAMIC=y -FW_JUMP=y -ifeq ($(PLATFORM_RISCV_XLEN), 32) - # This needs to be 4MB aligned for 32-bit system - FW_JUMP_ADDR=0x80400000 -else - # This needs to be 2MB aligned for 64-bit system - FW_JUMP_ADDR=0x80200000 -endif -FW_JUMP_FDT_ADDR=0x88000000 -FW_PAYLOAD=y -ifeq ($(PLATFORM_RISCV_XLEN), 32) - # This needs to be 4MB aligned for 32-bit system - FW_PAYLOAD_OFFSET=0x400000 -else - # This needs to be 2MB aligned for 64-bit system - FW_PAYLOAD_OFFSET=0x200000 -endif -FW_PAYLOAD_FDT_ADDR=0x88000000platform/sifive/fu540/objects.mk deleted +0
-2@@ -1,10 +0,0 @@ -# -# SPDX-License-Identifier: BSD-2-Clause -# -# Copyright (c) 2019 WesternDigital Corporation or its affiliates.
platform/sifive/fu540/objects.mk deleted +0
-6-# -# Authors: -# Atish Patra <[email protected]> -# - -platform-objs-y += platform.oplatform/sifive/fu540/platform.c deleted +0
-67@@ -1,175 +0,0 @@ -/* -* SPDX-License-Identifier: BSD-2-Clause -* -* Copyright (c) 2019 Western Digital Corporation or its affiliates. -* -* Authors: -* Atish Patra <[email protected]> -*/ - -#include <libfdt.h> -#include <sbi/riscv_asm.h> -#include <sbi/riscv_io.h> -#include <sbi/riscv_encoding.h> -#include <sbi/sbi_console.h> -#include <sbi/sbi_const.h> -#include <sbi/sbi_platform.h> -#include <sbi_utils/fdt/fdt_fixup.h> -#include <sbi_utils/irqchip/plic.h> -#include <sbi_utils/serial/sifive-uart.h> -#include <sbi_utils/sys/clint.h> - -/* clang-format off */ - -#define FU540_HART_COUNT 5 - -#define FU540_SYS_CLK 1000000000 - -#define FU540_CLINT_ADDR 0x2000000 - -#define FU540_PLIC_ADDR 0xc000000 -#define FU540_PLIC_NUM_SOURCES 0x35 -#define FU540_PLIC_NUM_PRIORITIES 7 - -#define FU540_UART0_ADDR 0x10010000 -#define FU540_UART1_ADDR 0x10011000 -#define FU540_UART_BAUDRATE 115200 - -/* PRCI clock related macros */ -//TODO: Do we need a separate driver for this ? -#define FU540_PRCI_BASE_ADDR 0x10000000 -#define FU540_PRCI_CLKMUXSTATUSREG 0x002C -#define FU540_PRCI_CLKMUX_STATUS_TLCLKSEL (0x1 << 1) - -/* Full tlb flush always */ -#define FU540_TLB_RANGE_FLUSH_LIMIT 0 - -/* clang-format on */ - -static struct plic_data plic = { - .addr =FU540_PLIC_ADDR , - .num_src =FU540_PLIC_NUM_SOURCES , -}; - -static struct clint_data clint = { - .addr =FU540_CLINT_ADDR , - .first_hartid =0 , - .hart_count =FU540_HART_COUNT , - .has_64bit_mmio = TRUE, -}; - -static void fu540_modify_dt (void *fdt) -{ -fdt_cpu_fixup (fdt); - -fdt_fixups (fdt); - -/* -* SiFive Freedom U540 has an erratum that prevents S-mode software
platform/sifive/fu540/platform.c deleted +0
-1-* to access a PMP protected region using 1GB page table mapping, so
platform/sifive/fu540/platform.c deleted +0
-99-* always add the no-map attribute on this platform. -*/ -fdt_reserved_memory_nomap_fixup (fdt); -} - -static int fu540_final_init(bool cold_boot) -{ -void *fdt; - -if (!cold_boot) -return 0 ; - - fdt =sbi_scratch_thishart_arg1_ptr (); -fu540_modify_dt (fdt); - -return 0 ; -} - -static int fu540_console_init (void ) -{ -unsigned long peri_in_freq; - -if (readl ((volatile void *)FU540_PRCI_BASE_ADDR + -FU540_PRCI_CLKMUXSTATUSREG ) & -FU540_PRCI_CLKMUX_STATUS_TLCLKSEL ) { - peri_in_freq =FU540_SYS_CLK ; - }else { - peri_in_freq =FU540_SYS_CLK /2 ; - } - -return sifive_uart_init (FU540_UART0_ADDR , peri_in_freq, -FU540_UART_BAUDRATE ); -} - -static int fu540_irqchip_init(bool cold_boot) -{ -int rc; -u32 hartid =current_hartid (); - -if (cold_boot) { - rc =plic_cold_irqchip_init (&plic); -if (rc) -return rc; - } - -return plic_warm_irqchip_init (&plic, (hartid) ? (2 * hartid -1 ) :0 , - (hartid) ? (2 * hartid) :-1 ); -} - -static int fu540_ipi_init(bool cold_boot) -{ -int rc; - -if (cold_boot) { - rc =clint_cold_ipi_init (&clint); -if (rc) -return rc; - } - -return clint_warm_ipi_init (); -} - -static u64 fu540_get_tlbr_flush_limit(void) -{ -return FU540_TLB_RANGE_FLUSH_LIMIT ; -} - -static int fu540_timer_init(bool cold_boot) -{ -int rc; - -if (cold_boot) { - rc =clint_cold_timer_init (&clint,NULL ); -if (rc) -return rc; - } - -return clint_warm_timer_init (); -} - -static u32 fu540_hart_index2id[FU540_HART_COUNT -1 ] = { - [0 ] =1 , - [1 ] =2 , - [2 ] =3 , - [3 ] =4 , -}; - -const struct sbi_platform_operations platform_ops = { - .final_init = fu540_final_init, - .console_init = fu540_console_init, - .irqchip_init = fu540_irqchip_init, - .ipi_init = fu540_ipi_init, - .get_tlbr_flush_limit = fu540_get_tlbr_flush_limit, - .timer_init = fu540_timer_init, -}; - -const struct sbi_platform platform = { - .opensbi_version =OPENSBI_VERSION , - .platform_version =SBI_PLATFORM_VERSION (0x0 ,0x01 ), - .name ="SiFive Freedom U540" , - .features =SBI_PLATFORM_DEFAULT_FEATURES , - .hart_count = (FU540_HART_COUNT -1 ), - .hart_index2id = fu540_hart_index2id, - .hart_stack_size =
SBI_PLATFORM_DEFAULT_HART_STACK_SIZE,platform/sifive/fu540/platform.c deleted +0
-2- .platform_ops_addr = (unsigned long)&platform_ops -};scripts/create-binary-archive.sh +0
-3@@ -95,12 +95,10 @@ build_opensbi() { case "${BUILD_RISCV_XLEN}" in 32) # Setup 32-bit platform list - BUILD_PLATFORM_SUBDIR=("sifive/fu540") BUILD_PLATFORM_SUBDIR+=("generic") ;; 64) # Setup 64-bit platform list - BUILD_PLATFORM_SUBDIR=("sifive/fu540") BUILD_PLATFORM_SUBDIR+=("nuclei/ux600") BUILD_PLATFORM_SUBDIR+=("kendryte/k210") BUILD_PLATFORM_SUBDIR+=("fpga/ariane") --2.25.1
PATCH 3/3 platform: Remove sifive/fu540 platform
Quoted 12 lines · Anup Patel
+David
Quoted 9 lines
-----Original Message-----
From: Bin Meng <[email protected]>
Sent: 29 April 2021 15:46
To: Anup Patel <[email protected]>; opensbi at lists.infradead.org
Subject: [PATCH 3/3] platform: Remove sifive/fu540 platformNow that SiFive HiFive Unleashed board is using the generic platform support in OpenSBI, let's remove the old non-generic one.
Quoted 7 lines
Quoted 1 line
Signed-off-by Bin Meng <[email protected]>Looks good to me.
Reviewed-by Anup Patel <[email protected]>@David Abdurachmanov I hope this is okay ??
Seems okay. SiFive FUSDK uses generic platform for FU540/Unleashed and FU740/Unmatched.
Quoted 277 lines
Regards,
AnupQuoted 272 lines
---
platform/sifive/fu540/config.mk | 40 ------- platform/sifive/fu540/objects.mk | 10 -- platform/sifive/fu540/platform.c | 175 ------------------------------- scripts/create-binary-archive.sh | 2 - 4 files changed, 227 deletions(-) delete mode 100644 platform/sifive/fu540/config.mk delete mode 100644
platform/sifive/fu540/objects.mkdelete mode 100644platform/sifive/fu540/platform.c(quoted diff) +0
-0
b/platform/sifive/fu540/config.mkdeleted file mode 100644 index 23169b1..0000000platform/sifive/fu540/config.mk deleted +0
-2@@ -1,40 +0,0 @@ -# -# SPDX-License-Identifier: BSD-2-Clause -# -# Copyright (c) 2019 WesternDigital Corporation or its affiliates.
platform/sifive/fu540/config.mk deleted +0
-13-# -# Authors: -# Atish Patra <[email protected]> -# - -# Compiler flags -platform-cppflags-y = -platform-cflags-y = -platform-asflags-y = -platform-ldflags-y = - -# Command for platform specific "make run" -platform-runcmd = qemu-system-riscv$(PLATFORM_RISCV_XLEN) -M
sifive_u-m 256M \
- -nographic -bios $(build_dir)/platform/sifive/fu540/firmware/fw_payload.elfplatform/sifive/fu540/config.mk deleted +0
-22- -# Blobs to build -FW_TEXT_START=0x80000000 -FW_DYNAMIC=y -FW_JUMP=y -ifeq ($(PLATFORM_RISCV_XLEN), 32) - # This needs to be 4MB aligned for 32-bit system - FW_JUMP_ADDR=0x80400000 -else - # This needs to be 2MB aligned for 64-bit system - FW_JUMP_ADDR=0x80200000 -endif -FW_JUMP_FDT_ADDR=0x88000000 -FW_PAYLOAD=y -ifeq ($(PLATFORM_RISCV_XLEN), 32) - # This needs to be 4MB aligned for 32-bit system - FW_PAYLOAD_OFFSET=0x400000 -else - # This needs to be 2MB aligned for 64-bit system - FW_PAYLOAD_OFFSET=0x200000 -endif -FW_PAYLOAD_FDT_ADDR=0x88000000platform/sifive/fu540/objects.mk deleted +0
-2@@ -1,10 +0,0 @@ -# -# SPDX-License-Identifier: BSD-2-Clause -# -# Copyright (c) 2019 WesternDigital Corporation or its affiliates.
platform/sifive/fu540/objects.mk deleted +0
-6-# -# Authors: -# Atish Patra <[email protected]> -# - -platform-objs-y += platform.oplatform/sifive/fu540/platform.c deleted +0
-67@@ -1,175 +0,0 @@ -/* -* SPDX-License-Identifier: BSD-2-Clause -* -* Copyright (c) 2019 Western Digital Corporation or its affiliates. -* -* Authors: -* Atish Patra <[email protected]> -*/ - -#include <libfdt.h> -#include <sbi/riscv_asm.h> -#include <sbi/riscv_io.h> -#include <sbi/riscv_encoding.h> -#include <sbi/sbi_console.h> -#include <sbi/sbi_const.h> -#include <sbi/sbi_platform.h> -#include <sbi_utils/fdt/fdt_fixup.h> -#include <sbi_utils/irqchip/plic.h> -#include <sbi_utils/serial/sifive-uart.h> -#include <sbi_utils/sys/clint.h> - -/* clang-format off */ - -#define FU540_HART_COUNT 5 - -#define FU540_SYS_CLK 1000000000 - -#define FU540_CLINT_ADDR 0x2000000 - -#define FU540_PLIC_ADDR 0xc000000 -#define FU540_PLIC_NUM_SOURCES 0x35 -#define FU540_PLIC_NUM_PRIORITIES 7 - -#define FU540_UART0_ADDR 0x10010000 -#define FU540_UART1_ADDR 0x10011000 -#define FU540_UART_BAUDRATE 115200 - -/* PRCI clock related macros */ -//TODO: Do we need a separate driver for this ? -#define FU540_PRCI_BASE_ADDR 0x10000000 -#define FU540_PRCI_CLKMUXSTATUSREG 0x002C -#define FU540_PRCI_CLKMUX_STATUS_TLCLKSEL (0x1 << 1) - -/* Full tlb flush always */ -#define FU540_TLB_RANGE_FLUSH_LIMIT 0 - -/* clang-format on */ - -static struct plic_data plic = { - .addr =FU540_PLIC_ADDR , - .num_src =FU540_PLIC_NUM_SOURCES , -}; - -static struct clint_data clint = { - .addr =FU540_CLINT_ADDR , - .first_hartid =0 , - .hart_count =FU540_HART_COUNT , - .has_64bit_mmio = TRUE, -}; - -static void fu540_modify_dt (void *fdt) -{ -fdt_cpu_fixup (fdt); - -fdt_fixups (fdt); - -/* -* SiFive Freedom U540 has an erratum that prevents S-mode software
- * to access a PMP protected region using 1GB page table mapping,
soplatform/sifive/fu540/platform.c deleted +0
-99-* always add the no-map attribute on this platform. -*/ -fdt_reserved_memory_nomap_fixup (fdt); -} - -static int fu540_final_init(bool cold_boot) -{ -void *fdt; - -if (!cold_boot) -return 0 ; - - fdt =sbi_scratch_thishart_arg1_ptr (); -fu540_modify_dt (fdt); - -return 0 ; -} - -static int fu540_console_init (void ) -{ -unsigned long peri_in_freq; - -if (readl ((volatile void *)FU540_PRCI_BASE_ADDR + -FU540_PRCI_CLKMUXSTATUSREG ) & -FU540_PRCI_CLKMUX_STATUS_TLCLKSEL ) { - peri_in_freq =FU540_SYS_CLK ; - }else { - peri_in_freq =FU540_SYS_CLK /2 ; - } - -return sifive_uart_init (FU540_UART0_ADDR , peri_in_freq, -FU540_UART_BAUDRATE ); -} - -static int fu540_irqchip_init(bool cold_boot) -{ -int rc; -u32 hartid =current_hartid (); - -if (cold_boot) { - rc =plic_cold_irqchip_init (&plic); -if (rc) -return rc; - } - -return plic_warm_irqchip_init (&plic, (hartid) ? (2 * hartid -1 ) :0 , - (hartid) ? (2 * hartid) :-1 ); -} - -static int fu540_ipi_init(bool cold_boot) -{ -int rc; - -if (cold_boot) { - rc =clint_cold_ipi_init (&clint); -if (rc) -return rc; - } - -return clint_warm_ipi_init (); -} - -static u64 fu540_get_tlbr_flush_limit(void) -{ -return FU540_TLB_RANGE_FLUSH_LIMIT ; -} - -static int fu540_timer_init(bool cold_boot) -{ -int rc; - -if (cold_boot) { - rc =clint_cold_timer_init (&clint,NULL ); -if (rc) -return rc; - } - -return clint_warm_timer_init (); -} - -static u32 fu540_hart_index2id[FU540_HART_COUNT -1 ] = { - [0 ] =1 , - [1 ] =2 , - [2 ] =3 , - [3 ] =4 , -}; - -const struct sbi_platform_operations platform_ops = { - .final_init = fu540_final_init, - .console_init = fu540_console_init, - .irqchip_init = fu540_irqchip_init, - .ipi_init = fu540_ipi_init, - .get_tlbr_flush_limit = fu540_get_tlbr_flush_limit, - .timer_init = fu540_timer_init, -}; - -const struct sbi_platform platform = { - .opensbi_version =OPENSBI_VERSION , - .platform_version =SBI_PLATFORM_VERSION (0x0 ,0x01 ), - .name ="SiFive Freedom U540" , - .features =SBI_PLATFORM_DEFAULT_FEATURES , - .hart_count = (FU540_HART_COUNT -1 ), - .hart_index2id = fu540_hart_index2id, - .hart_stack_size =
SBI_PLATFORM_DEFAULT_HART_STACK_SIZE,platform/sifive/fu540/platform.c deleted +0
-2- .platform_ops_addr = (unsigned long)&platform_ops -};scripts/create-binary-archive.sh +0
-3@@ -95,12 +95,10 @@ build_opensbi() { case "${BUILD_RISCV_XLEN}" in 32) # Setup 32-bit platform list - BUILD_PLATFORM_SUBDIR=("sifive/fu540") BUILD_PLATFORM_SUBDIR+=("generic") ;; 64) # Setup 64-bit platform list - BUILD_PLATFORM_SUBDIR=("sifive/fu540") BUILD_PLATFORM_SUBDIR+=("nuclei/ux600") BUILD_PLATFORM_SUBDIR+=("kendryte/k210") BUILD_PLATFORM_SUBDIR+=("fpga/ariane") --2.25.1
Anup Patel
AppliedPATCH 3/3 platform: Remove sifive/fu540 platform
In reply to Anup PatelQuoted 17 lines
-----Original Message-----
From: Anup Patel
Sent: 04 May 2021 09:13
To: Bin Meng <[email protected]>; opensbi at lists.infradead.org; David Abdurachmanov <[email protected]>
Subject: RE: [PATCH 3/3] platform: Remove sifive/fu540 platform+David
Quoted 6 lines
-----Original Message-----
From: Bin Meng <[email protected]>
Sent: 29 April 2021 15:46
To: Anup Patel <[email protected]>; opensbi at lists.infradead.org
Subject: [PATCH 3/3] platform: Remove sifive/fu540 platform
Quoted 8 lines
Quoted 4 lines
Now that SiFive HiFive Unleashed board is using the generic platform support in OpenSBI, let's remove the old non-generic one.
Signed-off-by Bin Meng <[email protected]>Looks good to me.
Reviewed-by Anup Patel <[email protected]>
Applied this patch to the riscv/opensbi repo
Regards,
Anup
Quoted 281 lines
@David Abdurachmanov I hope this is okay ??
Regards,
AnupQuoted 24 lines
---
platform/sifive/fu540/config.mk | 40 ------- platform/sifive/fu540/objects.mk | 10 -- platform/sifive/fu540/platform.c | 175 ------------------------------- scripts/create-binary-archive.sh | 2 - 4 files changed, 227 deletions(-) delete mode 100644 platform/sifive/fu540/config.mk delete mode100644
platform/sifive/fu540/objects.mkdelete mode 100644platform/sifive/fu540/platform.c(quoted diff) +0
-0
b/platform/sifive/fu540/config.mkdeleted file mode 100644 index 23169b1..0000000platform/sifive/fu540/config.mk deleted +0
-2@@ -1,40 +0,0 @@ -# -# SPDX-License-Identifier: BSD-2-Clause -# -# Copyright (c) 2019Western Digital Corporation or its affiliates.
platform/sifive/fu540/config.mk deleted +0
-3-# -# Authors: -# Atish Patra <[email protected]>platform/sifive/fu540/config.mk
Quoted 10 lines
platform/sifive/fu540/config.mk deleted +0
-10-# - -# Compiler flags -platform-cppflags-y = -platform-cflags-y = -platform-asflags-y = -platform-ldflags-y = - -# Command for platform specific "make run" -platform-runcmd = qemu-system-riscv$(PLATFORM_RISCV_XLEN) -M
sifive_uQuoted 240 lines
platform/sifive/fu540/config.mk deleted +0
-2-m 256M \ - -nographic -bios$(build_dir)/platform/sifive/fu540/firmware/fw_payload.elf
platform/sifive/fu540/config.mk deleted +0
-22- -# Blobs to build -FW_TEXT_START=0x80000000 -FW_DYNAMIC=y -FW_JUMP=y -ifeq ($(PLATFORM_RISCV_XLEN), 32) - # This needs to be 4MB aligned for 32-bit system - FW_JUMP_ADDR=0x80400000 -else - # This needs to be 2MB aligned for 64-bit system - FW_JUMP_ADDR=0x80200000 -endif -FW_JUMP_FDT_ADDR=0x88000000 -FW_PAYLOAD=y -ifeq ($(PLATFORM_RISCV_XLEN), 32) - # This needs to be 4MB aligned for 32-bit system - FW_PAYLOAD_OFFSET=0x400000 -else - # This needs to be 2MB aligned for 64-bit system - FW_PAYLOAD_OFFSET=0x200000 -endif -FW_PAYLOAD_FDT_ADDR=0x88000000platform/sifive/fu540/objects.mk deleted +0
-2@@ -1,10 +0,0 @@ -# -# SPDX-License-Identifier: BSD-2-Clause -# -# Copyright (c) 2019Western Digital Corporation or its affiliates.
platform/sifive/fu540/objects.mk deleted +0
-6-# -# Authors: -# Atish Patra <[email protected]> -# - -platform-objs-y += platform.oplatform/sifive/fu540/platform.c deleted +0
-19@@ -1,175 +0,0 @@ -/* -* SPDX-License-Identifier: BSD-2-Clause -* -* Copyright (c) 2019 Western Digital Corporation or its affiliates. -* -* Authors: -* Atish Patra <[email protected]> -*/ - -#include <libfdt.h> -#include <sbi/riscv_asm.h> -#include <sbi/riscv_io.h> -#include <sbi/riscv_encoding.h> -#include <sbi/sbi_console.h> -#include <sbi/sbi_const.h> -#include <sbi/sbi_platform.h> -#include <sbi_utils/fdt/fdt_fixup.h> -#include <sbi_utils/irqchip/plic.h> -#include <sbi_utils/serial/sifive-uart.h> -#include<
sbi_utils/sys/clint.h>platform/sifive/fu540/platform.c deleted +0
-47- -/* clang-format off */ - -#define FU540_HART_COUNT 5 - -#define FU540_SYS_CLK 1000000000 - -#define FU540_CLINT_ADDR 0x2000000 - -#define FU540_PLIC_ADDR 0xc000000 -#define FU540_PLIC_NUM_SOURCES 0x35 -#define FU540_PLIC_NUM_PRIORITIES 7 - -#define FU540_UART0_ADDR 0x10010000 -#define FU540_UART1_ADDR 0x10011000 -#define FU540_UART_BAUDRATE 115200 - -/* PRCI clock related macros */ -//TODO: Do we need a separate driver for this ? -#define FU540_PRCI_BASE_ADDR 0x10000000 -#define FU540_PRCI_CLKMUXSTATUSREG 0x002C -#define FU540_PRCI_CLKMUX_STATUS_TLCLKSEL (0x1 << 1) - -/* Full tlb flush always */ -#define FU540_TLB_RANGE_FLUSH_LIMIT 0 - -/* clang-format on */ - -static struct plic_data plic = { - .addr =FU540_PLIC_ADDR , - .num_src =FU540_PLIC_NUM_SOURCES , -}; - -static struct clint_data clint = { - .addr =FU540_CLINT_ADDR , - .first_hartid =0 , - .hart_count =FU540_HART_COUNT , - .has_64bit_mmio = TRUE, -}; - -static void fu540_modify_dt(void *fdt) -{ -fdt_cpu_fixup (fdt); - -fdt_fixups (fdt); - -/* -* SiFive Freedom U540 has an erratum that prevents S-mode software
platform/sifive/fu540/platform.c deleted +0
-1-* to access a PMP protected region using 1GB page table mapping, so
platform/sifive/fu540/platform.c deleted +0
-99-* always add the no-map attribute on this platform. -*/ -fdt_reserved_memory_nomap_fixup (fdt); -} - -static int fu540_final_init(bool cold_boot) -{ -void *fdt; - -if (!cold_boot) -return 0 ; - - fdt =sbi_scratch_thishart_arg1_ptr (); -fu540_modify_dt (fdt); - -return 0 ; -} - -static int fu540_console_init (void ) -{ -unsigned long peri_in_freq; - -if (readl ((volatile void *)FU540_PRCI_BASE_ADDR + -FU540_PRCI_CLKMUXSTATUSREG ) & -FU540_PRCI_CLKMUX_STATUS_TLCLKSEL ) { - peri_in_freq =FU540_SYS_CLK ; - }else { - peri_in_freq =FU540_SYS_CLK /2 ; - } - -return sifive_uart_init (FU540_UART0_ADDR , peri_in_freq, -FU540_UART_BAUDRATE ); -} - -static int fu540_irqchip_init(bool cold_boot) -{ -int rc; -u32 hartid =current_hartid (); - -if (cold_boot) { - rc =plic_cold_irqchip_init (&plic); -if (rc) -return rc; - } - -return plic_warm_irqchip_init (&plic, (hartid) ? (2 * hartid -1 ) :0 , - (hartid) ? (2 * hartid) :-1 ); -} - -static int fu540_ipi_init(bool cold_boot) -{ -int rc; - -if (cold_boot) { - rc =clint_cold_ipi_init (&clint); -if (rc) -return rc; - } - -return clint_warm_ipi_init (); -} - -static u64 fu540_get_tlbr_flush_limit(void) -{ -return FU540_TLB_RANGE_FLUSH_LIMIT ; -} - -static int fu540_timer_init(bool cold_boot) -{ -int rc; - -if (cold_boot) { - rc =clint_cold_timer_init (&clint,NULL ); -if (rc) -return rc; - } - -return clint_warm_timer_init (); -} - -static u32 fu540_hart_index2id[FU540_HART_COUNT -1 ] = { - [0 ] =1 , - [1 ] =2 , - [2 ] =3 , - [3 ] =4 , -}; - -const struct sbi_platform_operations platform_ops = { - .final_init = fu540_final_init, - .console_init = fu540_console_init, - .irqchip_init = fu540_irqchip_init, - .ipi_init = fu540_ipi_init, - .get_tlbr_flush_limit = fu540_get_tlbr_flush_limit, - .timer_init = fu540_timer_init, -}; - -const struct sbi_platform platform = { - .opensbi_version =OPENSBI_VERSION , - .platform_version =SBI_PLATFORM_VERSION (0x0 ,0x01 ), - .name ="SiFive Freedom U540" , - .features =SBI_PLATFORM_DEFAULT_FEATURES , - .hart_count = (FU540_HART_COUNT -1 ), - .hart_index2id = fu540_hart_index2id, - .hart_stack_size =
SBI_PLATFORM_DEFAULT_HART_STACK_SIZE,platform/sifive/fu540/platform.c deleted +0
-2- .platform_ops_addr = (unsigned long)&platform_ops -};scripts/create-binary-archive.sh +0
-3@@ -95,12 +95,10 @@ build_opensbi() { case "${BUILD_RISCV_XLEN}" in 32) # Setup 32-bit platform list - BUILD_PLATFORM_SUBDIR=("sifive/fu540") BUILD_PLATFORM_SUBDIR+=("generic") ;; 64) # Setup 64-bit platform list - BUILD_PLATFORM_SUBDIR=("sifive/fu540") BUILD_PLATFORM_SUBDIR+=("nuclei/ux600") BUILD_PLATFORM_SUBDIR+=("kendryte/k210") BUILD_PLATFORM_SUBDIR+=("fpga/ariane") --2.25.1
PATCH 1/3 docs: platform: Sort platform names
In reply to Bin MengQuoted 11 lines
-----Original Message-----
From: Bin Meng <[email protected]>
Sent: 29 April 2021 15:46
To: Anup Patel <[email protected]>; opensbi at lists.infradead.org
Subject: [PATCH 1/3] docs: platform: Sort platform namesLet's sort the platform names in alphabetical order.
Signed-off-by Bin Meng <[email protected]>
Looks good to me.
Regards,
Anup
Quoted 25 lines
---
docs/platform/generic.md | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)docs/platform/generic.md index renamed from docs/platform/generic.md +0
-08c3b0dd..e0bf8fe 100644
docs/platform/generic.md +2
-3@@ -46,11 +46,11 @@ RISC-V Platforms Using Generic Platform --------------------------------------- * **QEMU RISC-V Virt Machine** (*[qemu_virt.md]*) -* **Spike** (*[spike.md]*) * **Shakti C-class SoC Platform** (*[shakti_cclass.md]*) +* **Spike** (*[spike.md]*) * **T-HEAD C9xx series Processors** (*[thead-c9xx.md]*) [qemu_virt.md]: qemu_virt.md -[spike.md]: spike.md [shakti_cclass.md]: shakti_cclass.md +[spike.md]: spike.md [thead-c9xx.md]: thead-c9xx.md --2.25.1
Anup Patel
AppliedPATCH 1/3 docs: platform: Sort platform names
Quoted 16 lines
-----Original Message-----
From: Anup Patel
Sent: 04 May 2021 09:10
To: Bin Meng <[email protected]>; opensbi at lists.infradead.org
Subject: RE: [PATCH 1/3] docs: platform: Sort platform namesQuoted 6 lines
-----Original Message-----
From: Bin Meng <[email protected]>
Sent: 29 April 2021 15:46
To: Anup Patel <[email protected]>; opensbi at lists.infradead.org
Subject: [PATCH 1/3] docs: platform: Sort platform names
Quoted 7 lines
Quoted 3 lines
Let's sort the platform names in alphabetical order.
Signed-off-by Bin Meng <[email protected]>Looks good to me.
Reviewed-by Anup Patel <[email protected]>
Applied this patch to the riscv/opensbi repo
Regards,
Anup
Quoted 29 lines
Regards,
AnupQuoted 25 lines
---
docs/platform/generic.md | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)docs/platform/generic.md index renamed from docs/platform/generic.md +0
-08c3b0dd..e0bf8fe 100644
docs/platform/generic.md +2
-3@@ -46,11 +46,11 @@ RISC-V Platforms Using Generic Platform --------------------------------------- * **QEMU RISC-V Virt Machine** (*[qemu_virt.md]*) -* **Spike** (*[spike.md]*) * **Shakti C-class SoC Platform** (*[shakti_cclass.md]*) +* **Spike** (*[spike.md]*) * **T-HEAD C9xx series Processors** (*[thead-c9xx.md]*) [qemu_virt.md]: qemu_virt.md -[spike.md]: spike.md [shakti_cclass.md]: shakti_cclass.md +[spike.md]: spike.md [thead-c9xx.md]: thead-c9xx.md --2.25.1